drivers/block/DAC960.c

   1 /*
   2
   3   Linux Driver for Mylex DAC960/AcceleRAID/eXtremeRAID PCI RAID Controllers
   4
   5   Copyright 1998-2001 by Leonard N. Zubkoff <lnz@dandelion.com>
   6   Portions Copyright 2002 by Mylex (An IBM Business Unit)
   7
   8   This program is free software; you may redistribute and/or modify it under
   9   the terms of the GNU General Public License Version 2 as published by the
  10   Free Software Foundation.
  11
  12   This program is distributed in the hope that it will be useful, but
  13   WITHOUT ANY WARRANTY, without even the implied warranty of MERCHANTABILITY
  14   or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
  15   for complete details.
  16
  17 */
  18
  19
  20 #define DAC960_DriverVersion                    "2.5.49"
  21 #define DAC960_DriverDate                       "21 Aug 2007"
  22
  23
  24 #include <linux/module.h>
  25 #include <linux/types.h>
  26 #include <linux/miscdevice.h>
  27 #include <linux/blkdev.h>
  28 #include <linux/bio.h>
  29 #include <linux/completion.h>
  30 #include <linux/delay.h>
  31 #include <linux/genhd.h>
  32 #include <linux/hdreg.h>
  33 #include <linux/blkpg.h>
  34 #include <linux/dma-mapping.h>
  35 #include <linux/interrupt.h>
  36 #include <linux/ioport.h>
  37 #include <linux/mm.h>
  38 #include <linux/slab.h>
  39 #include <linux/smp_lock.h>
  40 #include <linux/proc_fs.h>
  41 #include <linux/seq_file.h>
  42 #include <linux/reboot.h>
  43 #include <linux/spinlock.h>
  44 #include <linux/timer.h>
  45 #include <linux/pci.h>
  46 #include <linux/init.h>
  47 #include <linux/jiffies.h>
  48 #include <linux/random.h>
  49 #include <linux/scatterlist.h>
  50 #include <asm/io.h>
  51 #include <asm/uaccess.h>
  52 #include "DAC960.h"
  53
  54 #define DAC960_GAM_MINOR        252
  55
  56
  57 static DAC960_Controller_T *DAC960_Controllers[DAC960_MaxControllers];
  58 static int DAC960_ControllerCount;
  59 static struct proc_dir_entry *DAC960_ProcDirectoryEntry;
  60
  61 static long disk_size(DAC960_Controller_T *p, int drive_nr)
  62 {
  63         if (p->FirmwareType == DAC960_V1_Controller) {
  64                 if (drive_nr >= p->LogicalDriveCount)
  65                         return 0;
  66                 return p->V1.LogicalDriveInformation[drive_nr].
  67                         LogicalDriveSize;
  68         } else {
  69                 DAC960_V2_LogicalDeviceInfo_T *i =
  70                         p->V2.LogicalDeviceInformation[drive_nr];
  71                 if (i == NULL)
  72                         return 0;
  73                 return i->ConfigurableDeviceSize;
  74         }
  75 }
  76
  77 static int DAC960_open(struct block_device *bdev, fmode_t mode)
  78 {
  79         struct gendisk *disk = bdev->bd_disk;
  80         DAC960_Controller_T *p = disk->queue->queuedata;
  81         int drive_nr = (long)disk->private_data;
  82         int ret = -ENXIO;
  83
  84         lock_kernel();
  85         if (p->FirmwareType == DAC960_V1_Controller) {
  86                 if (p->V1.LogicalDriveInformation[drive_nr].
  87                     LogicalDriveState == DAC960_V1_LogicalDrive_Offline)
  88                         goto out;
  89         } else {
  90                 DAC960_V2_LogicalDeviceInfo_T *i =
  91                         p->V2.LogicalDeviceInformation[drive_nr];
  92                 if (!i || i->LogicalDeviceState == DAC960_V2_LogicalDevice_Offline)
  93                         goto out;
  94         }
  95
  96         check_disk_change(bdev);
  97
  98         if (!get_capacity(p->disks[drive_nr]))
  99                 goto out;
 100         ret = 0;
 101 out:
 102         unlock_kernel();
 103         return ret;
 104 }
 105
 106 static int DAC960_getgeo(struct block_device *bdev, struct hd_geometry *geo)
 107 {
 108         struct gendisk *disk = bdev->bd_disk;
 109         DAC960_Controller_T *p = disk->queue->queuedata;
 110         int drive_nr = (long)disk->private_data;
 111
 112         if (p->FirmwareType == DAC960_V1_Controller) {
 113                 geo->heads = p->V1.GeometryTranslationHeads;
 114                 geo->sectors = p->V1.GeometryTranslationSectors;
 115                 geo->cylinders = p->V1.LogicalDriveInformation[drive_nr].
 116                         LogicalDriveSize / (geo->heads * geo->sectors);
 117         } else {
 118                 DAC960_V2_LogicalDeviceInfo_T *i =
 119                         p->V2.LogicalDeviceInformation[drive_nr];
 120                 switch (i->DriveGeometry) {
 121                 case DAC960_V2_Geometry_128_32:
 122                         geo->heads = 128;
 123                         geo->sectors = 32;
 124                         break;
 125                 case DAC960_V2_Geometry_255_63:
 126                         geo->heads = 255;
 127                         geo->sectors = 63;
 128                         break;
 129                 default:
 130                         DAC960_Error("Illegal Logical Device Geometry %d\n",
 131                                         p, i->DriveGeometry);
 132                         return -EINVAL;
 133                 }
 134
 135                 geo->cylinders = i->ConfigurableDeviceSize /
 136                         (geo->heads * geo->sectors);
 137         }
 138
 139         return 0;
 140 }
 141
 142 static int DAC960_media_changed(struct gendisk *disk)
 143 {
 144         DAC960_Controller_T *p = disk->queue->queuedata;
 145         int drive_nr = (long)disk->private_data;
 146
 147         if (!p->LogicalDriveInitiallyAccessible[drive_nr])
 148                 return 1;
 149         return 0;
 150 }
 151
 152 static int DAC960_revalidate_disk(struct gendisk *disk)
 153 {
 154         DAC960_Controller_T *p = disk->queue->queuedata;
 155         int unit = (long)disk->private_data;
 156
 157         set_capacity(disk, disk_size(p, unit));
 158         return 0;
 159 }
 160
 161 static const struct block_device_operations DAC960_BlockDeviceOperations = {
 162         .owner                  = THIS_MODULE,
 163         .open                   = DAC960_open,
 164         .getgeo                 = DAC960_getgeo,
 165         .media_changed          = DAC960_media_changed,
 166         .revalidate_disk        = DAC960_revalidate_disk,
 167 };
 168
 169
 170 /*
 171   DAC960_AnnounceDriver announces the Driver Version and Date, Author's Name,
 172   Copyright Notice, and Electronic Mail Address.
 173 */
 174
 175 static void DAC960_AnnounceDriver(DAC960_Controller_T *Controller)
 176 {
 177   DAC960_Announce("***** DAC960 RAID Driver Version "
 178                   DAC960_DriverVersion " of "
 179                   DAC960_DriverDate " *****\n", Controller);
 180   DAC960_Announce("Copyright 1998-2001 by Leonard N. Zubkoff "
 181                   "<lnz@dandelion.com>\n", Controller);
 182 }
 183
 184
 185 /*
 186   DAC960_Failure prints a standardized error message, and then returns false.
 187 */
 188
 189 static bool DAC960_Failure(DAC960_Controller_T *Controller,
 190                               unsigned char *ErrorMessage)
 191 {
 192   DAC960_Error("While configuring DAC960 PCI RAID Controller at\n",
 193                Controller);
 194   if (Controller->IO_Address == 0)
 195     DAC960_Error("PCI Bus %d Device %d Function %d I/O Address N/A "
 196                  "PCI Address 0x%X\n", Controller,
 197                  Controller->Bus, Controller->Device,
 198                  Controller->Function, Controller->PCI_Address);
 199   else DAC960_Error("PCI Bus %d Device %d Function %d I/O Address "
 200                     "0x%X PCI Address 0x%X\n", Controller,
 201                     Controller->Bus, Controller->Device,
 202                     Controller->Function, Controller->IO_Address,
 203                     Controller->PCI_Address);
 204   DAC960_Error("%s FAILED - DETACHING\n", Controller, ErrorMessage);
 205   return false;
 206 }
 207
 208 /*
 209   init_dma_loaf() and slice_dma_loaf() are helper functions for
 210   aggregating the dma-mapped memory for a well-known collection of
 211   data structures that are of different lengths.
 212
 213   These routines don't guarantee any alignment.  The caller must
 214   include any space needed for alignment in the sizes of the structures
 215   that are passed in.
 216  */
 217
 218 static bool init_dma_loaf(struct pci_dev *dev, struct dma_loaf *loaf,
 219                                                                  size_t len)
 220 {
 221         void *cpu_addr;
 222         dma_addr_t dma_handle;
 223
 224         cpu_addr = pci_alloc_consistent(dev, len, &dma_handle);
 225         if (cpu_addr == NULL)
 226                 return false;
 227
 228         loaf->cpu_free = loaf->cpu_base = cpu_addr;
 229         loaf->dma_free =loaf->dma_base = dma_handle;
 230         loaf->length = len;
 231         memset(cpu_addr, 0, len);
 232         return true;
 233 }
 234
 235 static void *slice_dma_loaf(struct dma_loaf *loaf, size_t len,
 236                                         dma_addr_t *dma_handle)
 237 {
 238         void *cpu_end = loaf->cpu_free + len;
 239         void *cpu_addr = loaf->cpu_free;
 240
 241         BUG_ON(cpu_end > loaf->cpu_base + loaf->length);
 242         *dma_handle = loaf->dma_free;
 243         loaf->cpu_free = cpu_end;
 244         loaf->dma_free += len;
 245         return cpu_addr;
 246 }
 247
 248 static void free_dma_loaf(struct pci_dev *dev, struct dma_loaf *loaf_handle)
 249 {
 250         if (loaf_handle->cpu_base != NULL)
 251                 pci_free_consistent(dev, loaf_handle->length,
 252                         loaf_handle->cpu_base, loaf_handle->dma_base);
 253 }
 254
 255
 256 /*
 257   DAC960_CreateAuxiliaryStructures allocates and initializes the auxiliary
 258   data structures for Controller.  It returns true on success and false on
 259   failure.
 260 */
 261
 262 static bool DAC960_CreateAuxiliaryStructures(DAC960_Controller_T *Controller)
 263 {
 264   int CommandAllocationLength, CommandAllocationGroupSize;
 265   int CommandsRemaining = 0, CommandIdentifier, CommandGroupByteCount;
 266   void *AllocationPointer = NULL;
 267   void *ScatterGatherCPU = NULL;
 268   dma_addr_t ScatterGatherDMA;
 269   struct pci_pool *ScatterGatherPool;
 270   void *RequestSenseCPU = NULL;
 271   dma_addr_t RequestSenseDMA;
 272   struct pci_pool *RequestSensePool = NULL;
 273
 274   if (Controller->FirmwareType == DAC960_V1_Controller)
 275     {
 276       CommandAllocationLength = offsetof(DAC960_Command_T, V1.EndMarker);
 277       CommandAllocationGroupSize = DAC960_V1_CommandAllocationGroupSize;
 278       ScatterGatherPool = pci_pool_create("DAC960_V1_ScatterGather",
 279                 Controller->PCIDevice,
 280         DAC960_V1_ScatterGatherLimit * sizeof(DAC960_V1_ScatterGatherSegment_T),
 281         sizeof(DAC960_V1_ScatterGatherSegment_T), 0);
 282       if (ScatterGatherPool == NULL)
 283             return DAC960_Failure(Controller,
 284                         "AUXILIARY STRUCTURE CREATION (SG)");
 285       Controller->ScatterGatherPool = ScatterGatherPool;
 286     }
 287   else
 288     {
 289       CommandAllocationLength = offsetof(DAC960_Command_T, V2.EndMarker);
 290       CommandAllocationGroupSize = DAC960_V2_CommandAllocationGroupSize;
 291       ScatterGatherPool = pci_pool_create("DAC960_V2_ScatterGather",
 292                 Controller->PCIDevice,
 293         DAC960_V2_ScatterGatherLimit * sizeof(DAC960_V2_ScatterGatherSegment_T),
 294         sizeof(DAC960_V2_ScatterGatherSegment_T), 0);
 295       if (ScatterGatherPool == NULL)
 296             return DAC960_Failure(Controller,
 297                         "AUXILIARY STRUCTURE CREATION (SG)");
 298       RequestSensePool = pci_pool_create("DAC960_V2_RequestSense",
 299                 Controller->PCIDevice, sizeof(DAC960_SCSI_RequestSense_T),
 300                 sizeof(int), 0);
 301       if (RequestSensePool == NULL) {
 302             pci_pool_destroy(ScatterGatherPool);
 303             return DAC960_Failure(Controller,
 304                         "AUXILIARY STRUCTURE CREATION (SG)");
 305       }
 306       Controller->ScatterGatherPool = ScatterGatherPool;
 307       Controller->V2.RequestSensePool = RequestSensePool;
 308     }
 309   Controller->CommandAllocationGroupSize = CommandAllocationGroupSize;
 310   Controller->FreeCommands = NULL;
 311   for (CommandIdentifier = 1;
 312        CommandIdentifier <= Controller->DriverQueueDepth;
 313        CommandIdentifier++)
 314     {
 315       DAC960_Command_T *Command;
 316       if (--CommandsRemaining <= 0)
 317         {
 318           CommandsRemaining =
 319                 Controller->DriverQueueDepth - CommandIdentifier + 1;
 320           if (CommandsRemaining > CommandAllocationGroupSize)
 321                 CommandsRemaining = CommandAllocationGroupSize;
 322           CommandGroupByteCount =
 323                 CommandsRemaining * CommandAllocationLength;
 324           AllocationPointer = kzalloc(CommandGroupByteCount, GFP_ATOMIC);
 325           if (AllocationPointer == NULL)
 326                 return DAC960_Failure(Controller,
 327                                         "AUXILIARY STRUCTURE CREATION");
 328          }
 329       Command = (DAC960_Command_T *) AllocationPointer;
 330       AllocationPointer += CommandAllocationLength;
 331       Command->CommandIdentifier = CommandIdentifier;
 332       Command->Controller = Controller;
 333       Command->Next = Controller->FreeCommands;
 334       Controller->FreeCommands = Command;
 335       Controller->Commands[CommandIdentifier-1] = Command;
 336       ScatterGatherCPU = pci_pool_alloc(ScatterGatherPool, GFP_ATOMIC,
 337                                                         &ScatterGatherDMA);
 338       if (ScatterGatherCPU == NULL)
 339           return DAC960_Failure(Controller, "AUXILIARY STRUCTURE CREATION");
 340
 341       if (RequestSensePool != NULL) {
 342           RequestSenseCPU = pci_pool_alloc(RequestSensePool, GFP_ATOMIC,
 343                                                 &RequestSenseDMA);
 344           if (RequestSenseCPU == NULL) {
 345                 pci_pool_free(ScatterGatherPool, ScatterGatherCPU,
 346                                 ScatterGatherDMA);
 347                 return DAC960_Failure(Controller,
 348                                         "AUXILIARY STRUCTURE CREATION");
 349           }
 350         }
 351      if (Controller->FirmwareType == DAC960_V1_Controller) {
 352         Command->cmd_sglist = Command->V1.ScatterList;
 353         Command->V1.ScatterGatherList =
 354                 (DAC960_V1_ScatterGatherSegment_T *)ScatterGatherCPU;
 355         Command->V1.ScatterGatherListDMA = ScatterGatherDMA;
 356         sg_init_table(Command->cmd_sglist, DAC960_V1_ScatterGatherLimit);
 357       } else {
 358         Command->cmd_sglist = Command->V2.ScatterList;
 359         Command->V2.ScatterGatherList =
 360                 (DAC960_V2_ScatterGatherSegment_T *)ScatterGatherCPU;
 361         Command->V2.ScatterGatherListDMA = ScatterGatherDMA;
 362         Command->V2.RequestSense =
 363                                 (DAC960_SCSI_RequestSense_T *)RequestSenseCPU;
 364         Command->V2.RequestSenseDMA = RequestSenseDMA;
 365         sg_init_table(Command->cmd_sglist, DAC960_V2_ScatterGatherLimit);
 366       }
 367     }
 368   return true;
 369 }
 370
 371
 372 /*
 373   DAC960_DestroyAuxiliaryStructures deallocates the auxiliary data
 374   structures for Controller.
 375 */
 376
 377 static void DAC960_DestroyAuxiliaryStructures(DAC960_Controller_T *Controller)
 378 {
 379   int i;
 380   struct pci_pool *ScatterGatherPool = Controller->ScatterGatherPool;
 381   struct pci_pool *RequestSensePool = NULL;
 382   void *ScatterGatherCPU;
 383   dma_addr_t ScatterGatherDMA;
 384   void *RequestSenseCPU;
 385   dma_addr_t RequestSenseDMA;
 386   DAC960_Command_T *CommandGroup = NULL;
 387
 388
 389   if (Controller->FirmwareType == DAC960_V2_Controller)
 390         RequestSensePool = Controller->V2.RequestSensePool;
 391
 392   Controller->FreeCommands = NULL;
 393   for (i = 0; i < Controller->DriverQueueDepth; i++)
 394     {
 395       DAC960_Command_T *Command = Controller->Commands[i];
 396
 397       if (Command == NULL)
 398           continue;
 399
 400       if (Controller->FirmwareType == DAC960_V1_Controller) {
 401           ScatterGatherCPU = (void *)Command->V1.ScatterGatherList;
 402           ScatterGatherDMA = Command->V1.ScatterGatherListDMA;
 403           RequestSenseCPU = NULL;
 404           RequestSenseDMA = (dma_addr_t)0;
 405       } else {
 406           ScatterGatherCPU = (void *)Command->V2.ScatterGatherList;
 407           ScatterGatherDMA = Command->V2.ScatterGatherListDMA;
 408           RequestSenseCPU = (void *)Command->V2.RequestSense;
 409           RequestSenseDMA = Command->V2.RequestSenseDMA;
 410       }
 411       if (ScatterGatherCPU != NULL)
 412           pci_pool_free(ScatterGatherPool, ScatterGatherCPU, ScatterGatherDMA);
 413       if (RequestSenseCPU != NULL)
 414           pci_pool_free(RequestSensePool, RequestSenseCPU, RequestSenseDMA);
 415
 416       if ((Command->CommandIdentifier
 417            % Controller->CommandAllocationGroupSize) == 1) {
 418            /*
 419             * We can't free the group of commands until all of the
 420             * request sense and scatter gather dma structures are free.
 421             * Remember the beginning of the group, but don't free it
 422             * until we've reached the beginning of the next group.
 423             */
 424            kfree(CommandGroup);
 425            CommandGroup = Command;
 426       }
 427       Controller->Commands[i] = NULL;
 428     }
 429   kfree(CommandGroup);
 430
 431   if (Controller->CombinedStatusBuffer != NULL)
 432     {
 433       kfree(Controller->CombinedStatusBuffer);
 434       Controller->CombinedStatusBuffer = NULL;
 435       Controller->CurrentStatusBuffer = NULL;
 436     }
 437
 438   if (ScatterGatherPool != NULL)
 439         pci_pool_destroy(ScatterGatherPool);
 440   if (Controller->FirmwareType == DAC960_V1_Controller)
 441         return;
 442
 443   if (RequestSensePool != NULL)
 444         pci_pool_destroy(RequestSensePool);
 445
 446   for (i = 0; i < DAC960_MaxLogicalDrives; i++) {
 447         kfree(Controller->V2.LogicalDeviceInformation[i]);
 448         Controller->V2.LogicalDeviceInformation[i] = NULL;
 449   }
 450
 451   for (i = 0; i < DAC960_V2_MaxPhysicalDevices; i++)
 452     {
 453       kfree(Controller->V2.PhysicalDeviceInformation[i]);
 454       Controller->V2.PhysicalDeviceInformation[i] = NULL;
 455       kfree(Controller->V2.InquiryUnitSerialNumber[i]);
 456       Controller->V2.InquiryUnitSerialNumber[i] = NULL;
 457     }
 458 }
 459
 460
 461 /*
 462   DAC960_V1_ClearCommand clears critical fields of Command for DAC960 V1
 463   Firmware Controllers.
 464 */
 465
 466 static inline void DAC960_V1_ClearCommand(DAC960_Command_T *Command)
 467 {
 468   DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
 469   memset(CommandMailbox, 0, sizeof(DAC960_V1_CommandMailbox_T));
 470   Command->V1.CommandStatus = 0;
 471 }
 472
 473
 474 /*
 475   DAC960_V2_ClearCommand clears critical fields of Command for DAC960 V2
 476   Firmware Controllers.
 477 */
 478
 479 static inline void DAC960_V2_ClearCommand(DAC960_Command_T *Command)
 480 {
 481   DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox;
 482   memset(CommandMailbox, 0, sizeof(DAC960_V2_CommandMailbox_T));
 483   Command->V2.CommandStatus = 0;
 484 }
 485
 486
 487 /*
 488   DAC960_AllocateCommand allocates a Command structure from Controller's
 489   free list.  During driver initialization, a special initialization command
 490   has been placed on the free list to guarantee that command allocation can
 491   never fail.
 492 */
 493
 494 static inline DAC960_Command_T *DAC960_AllocateCommand(DAC960_Controller_T
 495                                                        *Controller)
 496 {
 497   DAC960_Command_T *Command = Controller->FreeCommands;
 498   if (Command == NULL) return NULL;
 499   Controller->FreeCommands = Command->Next;
 500   Command->Next = NULL;
 501   return Command;
 502 }
 503
 504
 505 /*
 506   DAC960_DeallocateCommand deallocates Command, returning it to Controller's
 507   free list.
 508 */
 509
 510 static inline void DAC960_DeallocateCommand(DAC960_Command_T *Command)
 511 {
 512   DAC960_Controller_T *Controller = Command->Controller;
 513
 514   Command->Request = NULL;
 515   Command->Next = Controller->FreeCommands;
 516   Controller->FreeCommands = Command;
 517 }
 518
 519
 520 /*
 521   DAC960_WaitForCommand waits for a wake_up on Controller's Command Wait Queue.
 522 */
 523
 524 static void DAC960_WaitForCommand(DAC960_Controller_T *Controller)
 525 {
 526   spin_unlock_irq(&Controller->queue_lock);
 527   __wait_event(Controller->CommandWaitQueue, Controller->FreeCommands);
 528   spin_lock_irq(&Controller->queue_lock);
 529 }
 530
 531 /*
 532   DAC960_GEM_QueueCommand queues Command for DAC960 GEM Series Controllers.
 533 */
 534
 535 static void DAC960_GEM_QueueCommand(DAC960_Command_T *Command)
 536 {
 537   DAC960_Controller_T *Controller = Command->Controller;
 538   void __iomem *ControllerBaseAddress = Controller->BaseAddress;
 539   DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox;
 540   DAC960_V2_CommandMailbox_T *NextCommandMailbox =
 541       Controller->V2.NextCommandMailbox;
 542
 543   CommandMailbox->Common.CommandIdentifier = Command->CommandIdentifier;
 544   DAC960_GEM_WriteCommandMailbox(NextCommandMailbox, CommandMailbox);
 545
 546   if (Controller->V2.PreviousCommandMailbox1->Words[0] == 0 ||
 547       Controller->V2.PreviousCommandMailbox2->Words[0] == 0)
 548       DAC960_GEM_MemoryMailboxNewCommand(ControllerBaseAddress);
 549
 550   Controller->V2.PreviousCommandMailbox2 =
 551       Controller->V2.PreviousCommandMailbox1;
 552   Controller->V2.PreviousCommandMailbox1 = NextCommandMailbox;
 553
 554   if (++NextCommandMailbox > Controller->V2.LastCommandMailbox)
 555       NextCommandMailbox = Controller->V2.FirstCommandMailbox;
 556
 557   Controller->V2.NextCommandMailbox = NextCommandMailbox;
 558 }
 559
 560 /*
 561   DAC960_BA_QueueCommand queues Command for DAC960 BA Series Controllers.
 562 */
 563
 564 static void DAC960_BA_QueueCommand(DAC960_Command_T *Command)
 565 {
 566   DAC960_Controller_T *Controller = Command->Controller;
 567   void __iomem *ControllerBaseAddress = Controller->BaseAddress;
 568   DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox;
 569   DAC960_V2_CommandMailbox_T *NextCommandMailbox =
 570     Controller->V2.NextCommandMailbox;
 571   CommandMailbox->Common.CommandIdentifier = Command->CommandIdentifier;
 572   DAC960_BA_WriteCommandMailbox(NextCommandMailbox, CommandMailbox);
 573   if (Controller->V2.PreviousCommandMailbox1->Words[0] == 0 ||
 574       Controller->V2.PreviousCommandMailbox2->Words[0] == 0)
 575     DAC960_BA_MemoryMailboxNewCommand(ControllerBaseAddress);
 576   Controller->V2.PreviousCommandMailbox2 =
 577     Controller->V2.PreviousCommandMailbox1;
 578   Controller->V2.PreviousCommandMailbox1 = NextCommandMailbox;
 579   if (++NextCommandMailbox > Controller->V2.LastCommandMailbox)
 580     NextCommandMailbox = Controller->V2.FirstCommandMailbox;
 581   Controller->V2.NextCommandMailbox = NextCommandMailbox;
 582 }
 583
 584
 585 /*
 586   DAC960_LP_QueueCommand queues Command for DAC960 LP Series Controllers.
 587 */
 588
 589 static void DAC960_LP_QueueCommand(DAC960_Command_T *Command)
 590 {
 591   DAC960_Controller_T *Controller = Command->Controller;
 592   void __iomem *ControllerBaseAddress = Controller->BaseAddress;
 593   DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox;
 594   DAC960_V2_CommandMailbox_T *NextCommandMailbox =
 595     Controller->V2.NextCommandMailbox;
 596   CommandMailbox->Common.CommandIdentifier = Command->CommandIdentifier;
 597   DAC960_LP_WriteCommandMailbox(NextCommandMailbox, CommandMailbox);
 598   if (Controller->V2.PreviousCommandMailbox1->Words[0] == 0 ||
 599       Controller->V2.PreviousCommandMailbox2->Words[0] == 0)
 600     DAC960_LP_MemoryMailboxNewCommand(ControllerBaseAddress);
 601   Controller->V2.PreviousCommandMailbox2 =
 602     Controller->V2.PreviousCommandMailbox1;
 603   Controller->V2.PreviousCommandMailbox1 = NextCommandMailbox;
 604   if (++NextCommandMailbox > Controller->V2.LastCommandMailbox)
 605     NextCommandMailbox = Controller->V2.FirstCommandMailbox;
 606   Controller->V2.NextCommandMailbox = NextCommandMailbox;
 607 }
 608
 609
 610 /*
 611   DAC960_LA_QueueCommandDualMode queues Command for DAC960 LA Series
 612   Controllers with Dual Mode Firmware.
 613 */
 614
 615 static void DAC960_LA_QueueCommandDualMode(DAC960_Command_T *Command)
 616 {
 617   DAC960_Controller_T *Controller = Command->Controller;
 618   void __iomem *ControllerBaseAddress = Controller->BaseAddress;
 619   DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
 620   DAC960_V1_CommandMailbox_T *NextCommandMailbox =
 621     Controller->V1.NextCommandMailbox;
 622   CommandMailbox->Common.CommandIdentifier = Command->CommandIdentifier;
 623   DAC960_LA_WriteCommandMailbox(NextCommandMailbox, CommandMailbox);
 624   if (Controller->V1.PreviousCommandMailbox1->Words[0] == 0 ||
 625       Controller->V1.PreviousCommandMailbox2->Words[0] == 0)
 626     DAC960_LA_MemoryMailboxNewCommand(ControllerBaseAddress);
 627   Controller->V1.PreviousCommandMailbox2 =
 628     Controller->V1.PreviousCommandMailbox1;
 629   Controller->V1.PreviousCommandMailbox1 = NextCommandMailbox;
 630   if (++NextCommandMailbox > Controller->V1.LastCommandMailbox)
 631     NextCommandMailbox = Controller->V1.FirstCommandMailbox;
 632   Controller->V1.NextCommandMailbox = NextCommandMailbox;
 633 }
 634
 635
 636 /*
 637   DAC960_LA_QueueCommandSingleMode queues Command for DAC960 LA Series
 638   Controllers with Single Mode Firmware.
 639 */
 640
 641 static void DAC960_LA_QueueCommandSingleMode(DAC960_Command_T *Command)
 642 {
 643   DAC960_Controller_T *Controller = Command->Controller;
 644   void __iomem *ControllerBaseAddress = Controller->BaseAddress;
 645   DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
 646   DAC960_V1_CommandMailbox_T *NextCommandMailbox =
 647     Controller->V1.NextCommandMailbox;
 648   CommandMailbox->Common.CommandIdentifier = Command->CommandIdentifier;
 649   DAC960_LA_WriteCommandMailbox(NextCommandMailbox, CommandMailbox);
 650   if (Controller->V1.PreviousCommandMailbox1->Words[0] == 0 ||
 651       Controller->V1.PreviousCommandMailbox2->Words[0] == 0)
 652     DAC960_LA_HardwareMailboxNewCommand(ControllerBaseAddress);
 653   Controller->V1.PreviousCommandMailbox2 =
 654     Controller->V1.PreviousCommandMailbox1;
 655   Controller->V1.PreviousCommandMailbox1 = NextCommandMailbox;
 656   if (++NextCommandMailbox > Controller->V1.LastCommandMailbox)
 657     NextCommandMailbox = Controller->V1.FirstCommandMailbox;
 658   Controller->V1.NextCommandMailbox = NextCommandMailbox;
 659 }
 660
 661
 662 /*
 663   DAC960_PG_QueueCommandDualMode queues Command for DAC960 PG Series
 664   Controllers with Dual Mode Firmware.
 665 */
 666
 667 static void DAC960_PG_QueueCommandDualMode(DAC960_Command_T *Command)
 668 {
 669   DAC960_Controller_T *Controller = Command->Controller;
 670   void __iomem *ControllerBaseAddress = Controller->BaseAddress;
 671   DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
 672   DAC960_V1_CommandMailbox_T *NextCommandMailbox =
 673     Controller->V1.NextCommandMailbox;
 674   CommandMailbox->Common.CommandIdentifier = Command->CommandIdentifier;
 675   DAC960_PG_WriteCommandMailbox(NextCommandMailbox, CommandMailbox);
 676   if (Controller->V1.PreviousCommandMailbox1->Words[0] == 0 ||
 677       Controller->V1.PreviousCommandMailbox2->Words[0] == 0)
 678     DAC960_PG_MemoryMailboxNewCommand(ControllerBaseAddress);
 679   Controller->V1.PreviousCommandMailbox2 =
 680     Controller->V1.PreviousCommandMailbox1;
 681   Controller->V1.PreviousCommandMailbox1 = NextCommandMailbox;
 682   if (++NextCommandMailbox > Controller->V1.LastCommandMailbox)
 683     NextCommandMailbox = Controller->V1.FirstCommandMailbox;
 684   Controller->V1.NextCommandMailbox = NextCommandMailbox;
 685 }
 686
 687
 688 /*
 689   DAC960_PG_QueueCommandSingleMode queues Command for DAC960 PG Series
 690   Controllers with Single Mode Firmware.
 691 */
 692
 693 static void DAC960_PG_QueueCommandSingleMode(DAC960_Command_T *Command)
 694 {
 695   DAC960_Controller_T *Controller = Command->Controller;
 696   void __iomem *ControllerBaseAddress = Controller->BaseAddress;
 697   DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
 698   DAC960_V1_CommandMailbox_T *NextCommandMailbox =
 699     Controller->V1.NextCommandMailbox;
 700   CommandMailbox->Common.CommandIdentifier = Command->CommandIdentifier;
 701   DAC960_PG_WriteCommandMailbox(NextCommandMailbox, CommandMailbox);
 702   if (Controller->V1.PreviousCommandMailbox1->Words[0] == 0 ||
 703       Controller->V1.PreviousCommandMailbox2->Words[0] == 0)
 704     DAC960_PG_HardwareMailboxNewCommand(ControllerBaseAddress);
 705   Controller->V1.PreviousCommandMailbox2 =
 706     Controller->V1.PreviousCommandMailbox1;
 707   Controller->V1.PreviousCommandMailbox1 = NextCommandMailbox;
 708   if (++NextCommandMailbox > Controller->V1.LastCommandMailbox)
 709     NextCommandMailbox = Controller->V1.FirstCommandMailbox;
 710   Controller->V1.NextCommandMailbox = NextCommandMailbox;
 711 }
 712
 713
 714 /*
 715   DAC960_PD_QueueCommand queues Command for DAC960 PD Series Controllers.
 716 */
 717
 718 static void DAC960_PD_QueueCommand(DAC960_Command_T *Command)
 719 {
 720   DAC960_Controller_T *Controller = Command->Controller;
 721   void __iomem *ControllerBaseAddress = Controller->BaseAddress;
 722   DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
 723   CommandMailbox->Common.CommandIdentifier = Command->CommandIdentifier;
 724   while (DAC960_PD_MailboxFullP(ControllerBaseAddress))
 725     udelay(1);
 726   DAC960_PD_WriteCommandMailbox(ControllerBaseAddress, CommandMailbox);
 727   DAC960_PD_NewCommand(ControllerBaseAddress);
 728 }
 729
 730
 731 /*
 732   DAC960_P_QueueCommand queues Command for DAC960 P Series Controllers.
 733 */
 734
 735 static void DAC960_P_QueueCommand(DAC960_Command_T *Command)
 736 {
 737   DAC960_Controller_T *Controller = Command->Controller;
 738   void __iomem *ControllerBaseAddress = Controller->BaseAddress;
 739   DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
 740   CommandMailbox->Common.CommandIdentifier = Command->CommandIdentifier;
 741   switch (CommandMailbox->Common.CommandOpcode)
 742     {
 743     case DAC960_V1_Enquiry:
 744       CommandMailbox->Common.CommandOpcode = DAC960_V1_Enquiry_Old;
 745       break;
 746     case DAC960_V1_GetDeviceState:
 747       CommandMailbox->Common.CommandOpcode = DAC960_V1_GetDeviceState_Old;
 748       break;
 749     case DAC960_V1_Read:
 750       CommandMailbox->Common.CommandOpcode = DAC960_V1_Read_Old;
 751       DAC960_PD_To_P_TranslateReadWriteCommand(CommandMailbox);
 752       break;
 753     case DAC960_V1_Write:
 754       CommandMailbox->Common.CommandOpcode = DAC960_V1_Write_Old;
 755       DAC960_PD_To_P_TranslateReadWriteCommand(CommandMailbox);
 756       break;
 757     case DAC960_V1_ReadWithScatterGather:
 758       CommandMailbox->Common.CommandOpcode =
 759         DAC960_V1_ReadWithScatterGather_Old;
 760       DAC960_PD_To_P_TranslateReadWriteCommand(CommandMailbox);
 761       break;
 762     case DAC960_V1_WriteWithScatterGather:
 763       CommandMailbox->Common.CommandOpcode =
 764         DAC960_V1_WriteWithScatterGather_Old;
 765       DAC960_PD_To_P_TranslateReadWriteCommand(CommandMailbox);
 766       break;
 767     default:
 768       break;
 769     }
 770   while (DAC960_PD_MailboxFullP(ControllerBaseAddress))
 771     udelay(1);
 772   DAC960_PD_WriteCommandMailbox(ControllerBaseAddress, CommandMailbox);
 773   DAC960_PD_NewCommand(ControllerBaseAddress);
 774 }
 775
 776
 777 /*
 778   DAC960_ExecuteCommand executes Command and waits for completion.
 779 */
 780
 781 static void DAC960_ExecuteCommand(DAC960_Command_T *Command)
 782 {
 783   DAC960_Controller_T *Controller = Command->Controller;
 784   DECLARE_COMPLETION_ONSTACK(Completion);
 785   unsigned long flags;
 786   Command->Completion = &Completion;
 787
 788   spin_lock_irqsave(&Controller->queue_lock, flags);
 789   DAC960_QueueCommand(Command);
 790   spin_unlock_irqrestore(&Controller->queue_lock, flags);
 791
 792   if (in_interrupt())
 793           return;
 794   wait_for_completion(&Completion);
 795 }
 796
 797
 798 /*
 799   DAC960_V1_ExecuteType3 executes a DAC960 V1 Firmware Controller Type 3
 800   Command and waits for completion.  It returns true on success and false
 801   on failure.
 802 */
 803
 804 static bool DAC960_V1_ExecuteType3(DAC960_Controller_T *Controller,
 805                                       DAC960_V1_CommandOpcode_T CommandOpcode,
 806                                       dma_addr_t DataDMA)
 807 {
 808   DAC960_Command_T *Command = DAC960_AllocateCommand(Controller);
 809   DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
 810   DAC960_V1_CommandStatus_T CommandStatus;
 811   DAC960_V1_ClearCommand(Command);
 812   Command->CommandType = DAC960_ImmediateCommand;
 813   CommandMailbox->Type3.CommandOpcode = CommandOpcode;
 814   CommandMailbox->Type3.BusAddress = DataDMA;
 815   DAC960_ExecuteCommand(Command);
 816   CommandStatus = Command->V1.CommandStatus;
 817   DAC960_DeallocateCommand(Command);
 818   return (CommandStatus == DAC960_V1_NormalCompletion);
 819 }
 820
 821
 822 /*
 823   DAC960_V1_ExecuteTypeB executes a DAC960 V1 Firmware Controller Type 3B
 824   Command and waits for completion.  It returns true on success and false
 825   on failure.
 826 */
 827
 828 static bool DAC960_V1_ExecuteType3B(DAC960_Controller_T *Controller,
 829                                        DAC960_V1_CommandOpcode_T CommandOpcode,
 830                                        unsigned char CommandOpcode2,
 831                                        dma_addr_t DataDMA)
 832 {
 833   DAC960_Command_T *Command = DAC960_AllocateCommand(Controller);
 834   DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
 835   DAC960_V1_CommandStatus_T CommandStatus;
 836   DAC960_V1_ClearCommand(Command);
 837   Command->CommandType = DAC960_ImmediateCommand;
 838   CommandMailbox->Type3B.CommandOpcode = CommandOpcode;
 839   CommandMailbox->Type3B.CommandOpcode2 = CommandOpcode2;
 840   CommandMailbox->Type3B.BusAddress = DataDMA;
 841   DAC960_ExecuteCommand(Command);
 842   CommandStatus = Command->V1.CommandStatus;
 843   DAC960_DeallocateCommand(Command);
 844   return (CommandStatus == DAC960_V1_NormalCompletion);
 845 }
 846
 847
 848 /*
 849   DAC960_V1_ExecuteType3D executes a DAC960 V1 Firmware Controller Type 3D
 850   Command and waits for completion.  It returns true on success and false
 851   on failure.
 852 */
 853
 854 static bool DAC960_V1_ExecuteType3D(DAC960_Controller_T *Controller,
 855                                        DAC960_V1_CommandOpcode_T CommandOpcode,
 856                                        unsigned char Channel,
 857                                        unsigned char TargetID,
 858                                        dma_addr_t DataDMA)
 859 {
 860   DAC960_Command_T *Command = DAC960_AllocateCommand(Controller);
 861   DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
 862   DAC960_V1_CommandStatus_T CommandStatus;
 863   DAC960_V1_ClearCommand(Command);
 864   Command->CommandType = DAC960_ImmediateCommand;
 865   CommandMailbox->Type3D.CommandOpcode = CommandOpcode;
 866   CommandMailbox->Type3D.Channel = Channel;
 867   CommandMailbox->Type3D.TargetID = TargetID;
 868   CommandMailbox->Type3D.BusAddress = DataDMA;
 869   DAC960_ExecuteCommand(Command);
 870   CommandStatus = Command->V1.CommandStatus;
 871   DAC960_DeallocateCommand(Command);
 872   return (CommandStatus == DAC960_V1_NormalCompletion);
 873 }
 874
 875
 876 /*
 877   DAC960_V2_GeneralInfo executes a DAC960 V2 Firmware General Information
 878   Reading IOCTL Command and waits for completion.  It returns true on success
 879   and false on failure.
 880
 881   Return data in The controller's HealthStatusBuffer, which is dma-able memory
 882 */
 883
 884 static bool DAC960_V2_GeneralInfo(DAC960_Controller_T *Controller)
 885 {
 886   DAC960_Command_T *Command = DAC960_AllocateCommand(Controller);
 887   DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox;
 888   DAC960_V2_CommandStatus_T CommandStatus;
 889   DAC960_V2_ClearCommand(Command);
 890   Command->CommandType = DAC960_ImmediateCommand;
 891   CommandMailbox->Common.CommandOpcode = DAC960_V2_IOCTL;
 892   CommandMailbox->Common.CommandControlBits
 893                         .DataTransferControllerToHost = true;
 894   CommandMailbox->Common.CommandControlBits
 895                         .NoAutoRequestSense = true;
 896   CommandMailbox->Common.DataTransferSize = sizeof(DAC960_V2_HealthStatusBuffer_T);
 897   CommandMailbox->Common.IOCTL_Opcode = DAC960_V2_GetHealthStatus;
 898   CommandMailbox->Common.DataTransferMemoryAddress
 899                         .ScatterGatherSegments[0]
 900                         .SegmentDataPointer =
 901     Controller->V2.HealthStatusBufferDMA;
 902   CommandMailbox->Common.DataTransferMemoryAddress
 903                         .ScatterGatherSegments[0]
 904                         .SegmentByteCount =
 905     CommandMailbox->Common.DataTransferSize;
 906   DAC960_ExecuteCommand(Command);
 907   CommandStatus = Command->V2.CommandStatus;
 908   DAC960_DeallocateCommand(Command);
 909   return (CommandStatus == DAC960_V2_NormalCompletion);
 910 }
 911
 912
 913 /*
 914   DAC960_V2_ControllerInfo executes a DAC960 V2 Firmware Controller
 915   Information Reading IOCTL Command and waits for completion.  It returns
 916   true on success and false on failure.
 917
 918   Data is returned in the controller's V2.NewControllerInformation dma-able
 919   memory buffer.
 920 */
 921
 922 static bool DAC960_V2_NewControllerInfo(DAC960_Controller_T *Controller)
 923 {
 924   DAC960_Command_T *Command = DAC960_AllocateCommand(Controller);
 925   DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox;
 926   DAC960_V2_CommandStatus_T CommandStatus;
 927   DAC960_V2_ClearCommand(Command);
 928   Command->CommandType = DAC960_ImmediateCommand;
 929   CommandMailbox->ControllerInfo.CommandOpcode = DAC960_V2_IOCTL;
 930   CommandMailbox->ControllerInfo.CommandControlBits
 931                                 .DataTransferControllerToHost = true;
 932   CommandMailbox->ControllerInfo.CommandControlBits
 933                                 .NoAutoRequestSense = true;
 934   CommandMailbox->ControllerInfo.DataTransferSize = sizeof(DAC960_V2_ControllerInfo_T);
 935   CommandMailbox->ControllerInfo.ControllerNumber = 0;
 936   CommandMailbox->ControllerInfo.IOCTL_Opcode = DAC960_V2_GetControllerInfo;
 937   CommandMailbox->ControllerInfo.DataTransferMemoryAddress
 938                                 .ScatterGatherSegments[0]
 939                                 .SegmentDataPointer =
 940         Controller->V2.NewControllerInformationDMA;
 941   CommandMailbox->ControllerInfo.DataTransferMemoryAddress
 942                                 .ScatterGatherSegments[0]
 943                                 .SegmentByteCount =
 944     CommandMailbox->ControllerInfo.DataTransferSize;
 945   DAC960_ExecuteCommand(Command);
 946   CommandStatus = Command->V2.CommandStatus;
 947   DAC960_DeallocateCommand(Command);
 948   return (CommandStatus == DAC960_V2_NormalCompletion);
 949 }
 950
 951
 952 /*
 953   DAC960_V2_LogicalDeviceInfo executes a DAC960 V2 Firmware Controller Logical
 954   Device Information Reading IOCTL Command and waits for completion.  It
 955   returns true on success and false on failure.
 956
 957   Data is returned in the controller's V2.NewLogicalDeviceInformation
 958 */
 959
 960 static bool DAC960_V2_NewLogicalDeviceInfo(DAC960_Controller_T *Controller,
 961                                            unsigned short LogicalDeviceNumber)
 962 {
 963   DAC960_Command_T *Command = DAC960_AllocateCommand(Controller);
 964   DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox;
 965   DAC960_V2_CommandStatus_T CommandStatus;
 966
 967   DAC960_V2_ClearCommand(Command);
 968   Command->CommandType = DAC960_ImmediateCommand;
 969   CommandMailbox->LogicalDeviceInfo.CommandOpcode =
 970                                 DAC960_V2_IOCTL;
 971   CommandMailbox->LogicalDeviceInfo.CommandControlBits
 972                                    .DataTransferControllerToHost = true;
 973   CommandMailbox->LogicalDeviceInfo.CommandControlBits
 974                                    .NoAutoRequestSense = true;
 975   CommandMailbox->LogicalDeviceInfo.DataTransferSize =
 976                                 sizeof(DAC960_V2_LogicalDeviceInfo_T);
 977   CommandMailbox->LogicalDeviceInfo.LogicalDevice.LogicalDeviceNumber =
 978     LogicalDeviceNumber;
 979   CommandMailbox->LogicalDeviceInfo.IOCTL_Opcode = DAC960_V2_GetLogicalDeviceInfoValid;
 980   CommandMailbox->LogicalDeviceInfo.DataTransferMemoryAddress
 981                                    .ScatterGatherSegments[0]
 982                                    .SegmentDataPointer =
 983         Controller->V2.NewLogicalDeviceInformationDMA;
 984   CommandMailbox->LogicalDeviceInfo.DataTransferMemoryAddress
 985                                    .ScatterGatherSegments[0]
 986                                    .SegmentByteCount =
 987     CommandMailbox->LogicalDeviceInfo.DataTransferSize;
 988   DAC960_ExecuteCommand(Command);
 989   CommandStatus = Command->V2.CommandStatus;
 990   DAC960_DeallocateCommand(Command);
 991   return (CommandStatus == DAC960_V2_NormalCompletion);
 992 }
 993
 994
 995 /*
 996   DAC960_V2_PhysicalDeviceInfo executes a DAC960 V2 Firmware Controller "Read
 997   Physical Device Information" IOCTL Command and waits for completion.  It
 998   returns true on success and false on failure.
 999
1000   The Channel, TargetID, LogicalUnit arguments should be 0 the first time
1001   this function is called for a given controller.  This will return data
1002   for the "first" device on that controller.  The returned data includes a
1003   Channel, TargetID, LogicalUnit that can be passed in to this routine to
1004   get data for the NEXT device on that controller.
1005
1006   Data is stored in the controller's V2.NewPhysicalDeviceInfo dma-able
1007   memory buffer.
1008
1009 */
1010
1011 static bool DAC960_V2_NewPhysicalDeviceInfo(DAC960_Controller_T *Controller,
1012                                             unsigned char Channel,
1013                                             unsigned char TargetID,
1014                                             unsigned char LogicalUnit)
1015 {
1016   DAC960_Command_T *Command = DAC960_AllocateCommand(Controller);
1017   DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox;
1018   DAC960_V2_CommandStatus_T CommandStatus;
1019
1020   DAC960_V2_ClearCommand(Command);
1021   Command->CommandType = DAC960_ImmediateCommand;
1022   CommandMailbox->PhysicalDeviceInfo.CommandOpcode = DAC960_V2_IOCTL;
1023   CommandMailbox->PhysicalDeviceInfo.CommandControlBits
1024                                     .DataTransferControllerToHost = true;
1025   CommandMailbox->PhysicalDeviceInfo.CommandControlBits
1026                                     .NoAutoRequestSense = true;
1027   CommandMailbox->PhysicalDeviceInfo.DataTransferSize =
1028                                 sizeof(DAC960_V2_PhysicalDeviceInfo_T);
1029   CommandMailbox->PhysicalDeviceInfo.PhysicalDevice.LogicalUnit = LogicalUnit;
1030   CommandMailbox->PhysicalDeviceInfo.PhysicalDevice.TargetID = TargetID;
1031   CommandMailbox->PhysicalDeviceInfo.PhysicalDevice.Channel = Channel;
1032   CommandMailbox->PhysicalDeviceInfo.IOCTL_Opcode =
1033                                         DAC960_V2_GetPhysicalDeviceInfoValid;
1034   CommandMailbox->PhysicalDeviceInfo.DataTransferMemoryAddress
1035                                     .ScatterGatherSegments[0]
1036                                     .SegmentDataPointer =
1037                                         Controller->V2.NewPhysicalDeviceInformationDMA;
1038   CommandMailbox->PhysicalDeviceInfo.DataTransferMemoryAddress
1039                                     .ScatterGatherSegments[0]
1040                                     .SegmentByteCount =
1041     CommandMailbox->PhysicalDeviceInfo.DataTransferSize;
1042   DAC960_ExecuteCommand(Command);
1043   CommandStatus = Command->V2.CommandStatus;
1044   DAC960_DeallocateCommand(Command);
1045   return (CommandStatus == DAC960_V2_NormalCompletion);
1046 }
1047
1048
1049 static void DAC960_V2_ConstructNewUnitSerialNumber(
1050         DAC960_Controller_T *Controller,
1051         DAC960_V2_CommandMailbox_T *CommandMailbox, int Channel, int TargetID,
1052         int LogicalUnit)
1053 {
1054       CommandMailbox->SCSI_10.CommandOpcode = DAC960_V2_SCSI_10_Passthru;
1055       CommandMailbox->SCSI_10.CommandControlBits
1056                              .DataTransferControllerToHost = true;
1057       CommandMailbox->SCSI_10.CommandControlBits
1058                              .NoAutoRequestSense = true;
1059       CommandMailbox->SCSI_10.DataTransferSize =
1060         sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T);
1061       CommandMailbox->SCSI_10.PhysicalDevice.LogicalUnit = LogicalUnit;
1062       CommandMailbox->SCSI_10.PhysicalDevice.TargetID = TargetID;
1063       CommandMailbox->SCSI_10.PhysicalDevice.Channel = Channel;
1064       CommandMailbox->SCSI_10.CDBLength = 6;
1065       CommandMailbox->SCSI_10.SCSI_CDB[0] = 0x12; /* INQUIRY */
1066       CommandMailbox->SCSI_10.SCSI_CDB[1] = 1; /* EVPD = 1 */
1067       CommandMailbox->SCSI_10.SCSI_CDB[2] = 0x80; /* Page Code */
1068       CommandMailbox->SCSI_10.SCSI_CDB[3] = 0; /* Reserved */
1069       CommandMailbox->SCSI_10.SCSI_CDB[4] =
1070         sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T);
1071       CommandMailbox->SCSI_10.SCSI_CDB[5] = 0; /* Control */
1072       CommandMailbox->SCSI_10.DataTransferMemoryAddress
1073                              .ScatterGatherSegments[0]
1074                              .SegmentDataPointer =
1075                 Controller->V2.NewInquiryUnitSerialNumberDMA;
1076       CommandMailbox->SCSI_10.DataTransferMemoryAddress
1077                              .ScatterGatherSegments[0]
1078                              .SegmentByteCount =
1079                 CommandMailbox->SCSI_10.DataTransferSize;
1080 }
1081
1082
1083 /*
1084   DAC960_V2_NewUnitSerialNumber executes an SCSI pass-through
1085   Inquiry command to a SCSI device identified by Channel number,
1086   Target id, Logical Unit Number.  This function Waits for completion
1087   of the command.
1088
1089   The return data includes Unit Serial Number information for the
1090   specified device.
1091
1092   Data is stored in the controller's V2.NewPhysicalDeviceInfo dma-able
1093   memory buffer.
1094 */
1095
1096 static bool DAC960_V2_NewInquiryUnitSerialNumber(DAC960_Controller_T *Controller,
1097                         int Channel, int TargetID, int LogicalUnit)
1098 {
1099       DAC960_Command_T *Command;
1100       DAC960_V2_CommandMailbox_T *CommandMailbox;
1101       DAC960_V2_CommandStatus_T CommandStatus;
1102
1103       Command = DAC960_AllocateCommand(Controller);
1104       CommandMailbox = &Command->V2.CommandMailbox;
1105       DAC960_V2_ClearCommand(Command);
1106       Command->CommandType = DAC960_ImmediateCommand;
1107
1108       DAC960_V2_ConstructNewUnitSerialNumber(Controller, CommandMailbox,
1109                         Channel, TargetID, LogicalUnit);
1110
1111       DAC960_ExecuteCommand(Command);
1112       CommandStatus = Command->V2.CommandStatus;
1113       DAC960_DeallocateCommand(Command);
1114       return (CommandStatus == DAC960_V2_NormalCompletion);
1115 }
1116
1117
1118 /*
1119   DAC960_V2_DeviceOperation executes a DAC960 V2 Firmware Controller Device
1120   Operation IOCTL Command and waits for completion.  It returns true on
1121   success and false on failure.
1122 */
1123
1124 static bool DAC960_V2_DeviceOperation(DAC960_Controller_T *Controller,
1125                                          DAC960_V2_IOCTL_Opcode_T IOCTL_Opcode,
1126                                          DAC960_V2_OperationDevice_T
1127                                            OperationDevice)
1128 {
1129   DAC960_Command_T *Command = DAC960_AllocateCommand(Controller);
1130   DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox;
1131   DAC960_V2_CommandStatus_T CommandStatus;
1132   DAC960_V2_ClearCommand(Command);
1133   Command->CommandType = DAC960_ImmediateCommand;
1134   CommandMailbox->DeviceOperation.CommandOpcode = DAC960_V2_IOCTL;
1135   CommandMailbox->DeviceOperation.CommandControlBits
1136                                  .DataTransferControllerToHost = true;
1137   CommandMailbox->DeviceOperation.CommandControlBits
1138                                  .NoAutoRequestSense = true;
1139   CommandMailbox->DeviceOperation.IOCTL_Opcode = IOCTL_Opcode;
1140   CommandMailbox->DeviceOperation.OperationDevice = OperationDevice;
1141   DAC960_ExecuteCommand(Command);
1142   CommandStatus = Command->V2.CommandStatus;
1143   DAC960_DeallocateCommand(Command);
1144   return (CommandStatus == DAC960_V2_NormalCompletion);
1145 }
1146
1147
1148 /*
1149   DAC960_V1_EnableMemoryMailboxInterface enables the Memory Mailbox Interface
1150   for DAC960 V1 Firmware Controllers.
1151
1152   PD and P controller types have no memory mailbox, but still need the
1153   other dma mapped memory.
1154 */
1155
1156 static bool DAC960_V1_EnableMemoryMailboxInterface(DAC960_Controller_T
1157                                                       *Controller)
1158 {
1159   void __iomem *ControllerBaseAddress = Controller->BaseAddress;
1160   DAC960_HardwareType_T hw_type = Controller->HardwareType;
1161   struct pci_dev *PCI_Device = Controller->PCIDevice;
1162   struct dma_loaf *DmaPages = &Controller->DmaPages;
1163   size_t DmaPagesSize;
1164   size_t CommandMailboxesSize;
1165   size_t StatusMailboxesSize;
1166
1167   DAC960_V1_CommandMailbox_T *CommandMailboxesMemory;
1168   dma_addr_t CommandMailboxesMemoryDMA;
1169
1170   DAC960_V1_StatusMailbox_T *StatusMailboxesMemory;
1171   dma_addr_t StatusMailboxesMemoryDMA;
1172
1173   DAC960_V1_CommandMailbox_T CommandMailbox;
1174   DAC960_V1_CommandStatus_T CommandStatus;
1175   int TimeoutCounter;
1176   int i;
1177
1178
1179   if (pci_set_dma_mask(Controller->PCIDevice, DMA_BIT_MASK(32)))
1180         return DAC960_Failure(Controller, "DMA mask out of range");
1181   Controller->BounceBufferLimit = DMA_BIT_MASK(32);
1182
1183   if ((hw_type == DAC960_PD_Controller) || (hw_type == DAC960_P_Controller)) {
1184     CommandMailboxesSize =  0;
1185     StatusMailboxesSize = 0;
1186   } else {
1187     CommandMailboxesSize =  DAC960_V1_CommandMailboxCount * sizeof(DAC960_V1_CommandMailbox_T);
1188     StatusMailboxesSize = DAC960_V1_StatusMailboxCount * sizeof(DAC960_V1_StatusMailbox_T);
1189   }
1190   DmaPagesSize = CommandMailboxesSize + StatusMailboxesSize +
1191         sizeof(DAC960_V1_DCDB_T) + sizeof(DAC960_V1_Enquiry_T) +
1192         sizeof(DAC960_V1_ErrorTable_T) + sizeof(DAC960_V1_EventLogEntry_T) +
1193         sizeof(DAC960_V1_RebuildProgress_T) +
1194         sizeof(DAC960_V1_LogicalDriveInformationArray_T) +
1195         sizeof(DAC960_V1_BackgroundInitializationStatus_T) +
1196         sizeof(DAC960_V1_DeviceState_T) + sizeof(DAC960_SCSI_Inquiry_T) +
1197         sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T);
1198
1199   if (!init_dma_loaf(PCI_Device, DmaPages, DmaPagesSize))
1200         return false;
1201
1202
1203   if ((hw_type == DAC960_PD_Controller) || (hw_type == DAC960_P_Controller))
1204         goto skip_mailboxes;
1205
1206   CommandMailboxesMemory = slice_dma_loaf(DmaPages,
1207                 CommandMailboxesSize, &CommandMailboxesMemoryDMA);
1208
1209   /* These are the base addresses for the command memory mailbox array */
1210   Controller->V1.FirstCommandMailbox = CommandMailboxesMemory;
1211   Controller->V1.FirstCommandMailboxDMA = CommandMailboxesMemoryDMA;
1212
1213   CommandMailboxesMemory += DAC960_V1_CommandMailboxCount - 1;
1214   Controller->V1.LastCommandMailbox = CommandMailboxesMemory;
1215   Controller->V1.NextCommandMailbox = Controller->V1.FirstCommandMailbox;
1216   Controller->V1.PreviousCommandMailbox1 = Controller->V1.LastCommandMailbox;
1217   Controller->V1.PreviousCommandMailbox2 =
1218                                         Controller->V1.LastCommandMailbox - 1;
1219
1220   /* These are the base addresses for the status memory mailbox array */
1221   StatusMailboxesMemory = slice_dma_loaf(DmaPages,
1222                 StatusMailboxesSize, &StatusMailboxesMemoryDMA);
1223
1224   Controller->V1.FirstStatusMailbox = StatusMailboxesMemory;
1225   Controller->V1.FirstStatusMailboxDMA = StatusMailboxesMemoryDMA;
1226   StatusMailboxesMemory += DAC960_V1_StatusMailboxCount - 1;
1227   Controller->V1.LastStatusMailbox = StatusMailboxesMemory;
1228   Controller->V1.NextStatusMailbox = Controller->V1.FirstStatusMailbox;
1229
1230 skip_mailboxes:
1231   Controller->V1.MonitoringDCDB = slice_dma_loaf(DmaPages,
1232                 sizeof(DAC960_V1_DCDB_T),
1233                 &Controller->V1.MonitoringDCDB_DMA);
1234
1235   Controller->V1.NewEnquiry = slice_dma_loaf(DmaPages,
1236                 sizeof(DAC960_V1_Enquiry_T),
1237                 &Controller->V1.NewEnquiryDMA);
1238
1239   Controller->V1.NewErrorTable = slice_dma_loaf(DmaPages,
1240                 sizeof(DAC960_V1_ErrorTable_T),
1241                 &Controller->V1.NewErrorTableDMA);
1242
1243   Controller->V1.EventLogEntry = slice_dma_loaf(DmaPages,
1244                 sizeof(DAC960_V1_EventLogEntry_T),
1245                 &Controller->V1.EventLogEntryDMA);
1246
1247   Controller->V1.RebuildProgress = slice_dma_loaf(DmaPages,
1248                 sizeof(DAC960_V1_RebuildProgress_T),
1249                 &Controller->V1.RebuildProgressDMA);
1250
1251   Controller->V1.NewLogicalDriveInformation = slice_dma_loaf(DmaPages,
1252                 sizeof(DAC960_V1_LogicalDriveInformationArray_T),
1253                 &Controller->V1.NewLogicalDriveInformationDMA);
1254
1255   Controller->V1.BackgroundInitializationStatus = slice_dma_loaf(DmaPages,
1256                 sizeof(DAC960_V1_BackgroundInitializationStatus_T),
1257                 &Controller->V1.BackgroundInitializationStatusDMA);
1258
1259   Controller->V1.NewDeviceState = slice_dma_loaf(DmaPages,
1260                 sizeof(DAC960_V1_DeviceState_T),
1261                 &Controller->V1.NewDeviceStateDMA);
1262
1263   Controller->V1.NewInquiryStandardData = slice_dma_loaf(DmaPages,
1264                 sizeof(DAC960_SCSI_Inquiry_T),
1265                 &Controller->V1.NewInquiryStandardDataDMA);
1266
1267   Controller->V1.NewInquiryUnitSerialNumber = slice_dma_loaf(DmaPages,
1268                 sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T),
1269                 &Controller->V1.NewInquiryUnitSerialNumberDMA);
1270
1271   if ((hw_type == DAC960_PD_Controller) || (hw_type == DAC960_P_Controller))
1272         return true;
1273
1274   /* Enable the Memory Mailbox Interface. */
1275   Controller->V1.DualModeMemoryMailboxInterface = true;
1276   CommandMailbox.TypeX.CommandOpcode = 0x2B;
1277   CommandMailbox.TypeX.CommandIdentifier = 0;
1278   CommandMailbox.TypeX.CommandOpcode2 = 0x14;
1279   CommandMailbox.TypeX.CommandMailboxesBusAddress =
1280                                 Controller->V1.FirstCommandMailboxDMA;
1281   CommandMailbox.TypeX.StatusMailboxesBusAddress =
1282                                 Controller->V1.FirstStatusMailboxDMA;
1283 #define TIMEOUT_COUNT 1000000
1284
1285   for (i = 0; i < 2; i++)
1286     switch (Controller->HardwareType)
1287       {
1288       case DAC960_LA_Controller:
1289         TimeoutCounter = TIMEOUT_COUNT;
1290         while (--TimeoutCounter >= 0)
1291           {
1292             if (!DAC960_LA_HardwareMailboxFullP(ControllerBaseAddress))
1293               break;
1294             udelay(10);
1295           }
1296         if (TimeoutCounter < 0) return false;
1297         DAC960_LA_WriteHardwareMailbox(ControllerBaseAddress, &CommandMailbox);
1298         DAC960_LA_HardwareMailboxNewCommand(ControllerBaseAddress);
1299         TimeoutCounter = TIMEOUT_COUNT;
1300         while (--TimeoutCounter >= 0)
1301           {
1302             if (DAC960_LA_HardwareMailboxStatusAvailableP(
1303                   ControllerBaseAddress))
1304               break;
1305             udelay(10);
1306           }
1307         if (TimeoutCounter < 0) return false;
1308         CommandStatus = DAC960_LA_ReadStatusRegister(ControllerBaseAddress);
1309         DAC960_LA_AcknowledgeHardwareMailboxInterrupt(ControllerBaseAddress);
1310         DAC960_LA_AcknowledgeHardwareMailboxStatus(ControllerBaseAddress);
1311         if (CommandStatus == DAC960_V1_NormalCompletion) return true;
1312         Controller->V1.DualModeMemoryMailboxInterface = false;
1313         CommandMailbox.TypeX.CommandOpcode2 = 0x10;
1314         break;
1315       case DAC960_PG_Controller:
1316         TimeoutCounter = TIMEOUT_COUNT;
1317         while (--TimeoutCounter >= 0)
1318           {
1319             if (!DAC960_PG_HardwareMailboxFullP(ControllerBaseAddress))
1320               break;
1321             udelay(10);
1322           }
1323         if (TimeoutCounter < 0) return false;
1324         DAC960_PG_WriteHardwareMailbox(ControllerBaseAddress, &CommandMailbox);
1325         DAC960_PG_HardwareMailboxNewCommand(ControllerBaseAddress);
1326
1327         TimeoutCounter = TIMEOUT_COUNT;
1328         while (--TimeoutCounter >= 0)
1329           {
1330             if (DAC960_PG_HardwareMailboxStatusAvailableP(
1331                   ControllerBaseAddress))
1332               break;
1333             udelay(10);
1334           }
1335         if (TimeoutCounter < 0) return false;
1336         CommandStatus = DAC960_PG_ReadStatusRegister(ControllerBaseAddress);
1337         DAC960_PG_AcknowledgeHardwareMailboxInterrupt(ControllerBaseAddress);
1338         DAC960_PG_AcknowledgeHardwareMailboxStatus(ControllerBaseAddress);
1339         if (CommandStatus == DAC960_V1_NormalCompletion) return true;
1340         Controller->V1.DualModeMemoryMailboxInterface = false;
1341         CommandMailbox.TypeX.CommandOpcode2 = 0x10;
1342         break;
1343       default:
1344         DAC960_Failure(Controller, "Unknown Controller Type\n");
1345         break;
1346       }
1347   return false;
1348 }
1349
1350
1351 /*
1352   DAC960_V2_EnableMemoryMailboxInterface enables the Memory Mailbox Interface
1353   for DAC960 V2 Firmware Controllers.
1354
1355   Aggregate the space needed for the controller's memory mailbox and
1356   the other data structures that will be targets of dma transfers with
1357   the controller.  Allocate a dma-mapped region of memory to hold these
1358   structures.  Then, save CPU pointers and dma_addr_t values to reference
1359   the structures that are contained in that region.
1360 */
1361
1362 static bool DAC960_V2_EnableMemoryMailboxInterface(DAC960_Controller_T
1363                                                       *Controller)
1364 {
1365   void __iomem *ControllerBaseAddress = Controller->BaseAddress;
1366   struct pci_dev *PCI_Device = Controller->PCIDevice;
1367   struct dma_loaf *DmaPages = &Controller->DmaPages;
1368   size_t DmaPagesSize;
1369   size_t CommandMailboxesSize;
1370   size_t StatusMailboxesSize;
1371
1372   DAC960_V2_CommandMailbox_T *CommandMailboxesMemory;
1373   dma_addr_t CommandMailboxesMemoryDMA;
1374
1375   DAC960_V2_StatusMailbox_T *StatusMailboxesMemory;
1376   dma_addr_t StatusMailboxesMemoryDMA;
1377
1378   DAC960_V2_CommandMailbox_T *CommandMailbox;
1379   dma_addr_t    CommandMailboxDMA;
1380   DAC960_V2_CommandStatus_T CommandStatus;
1381
1382         if (!pci_set_dma_mask(Controller->PCIDevice, DMA_BIT_MASK(64)))
1383                 Controller->BounceBufferLimit = DMA_BIT_MASK(64);
1384         else if (!pci_set_dma_mask(Controller->PCIDevice, DMA_BIT_MASK(32)))
1385                 Controller->BounceBufferLimit = DMA_BIT_MASK(32);
1386         else
1387                 return DAC960_Failure(Controller, "DMA mask out of range");
1388
1389   /* This is a temporary dma mapping, used only in the scope of this function */
1390   CommandMailbox = pci_alloc_consistent(PCI_Device,
1391                 sizeof(DAC960_V2_CommandMailbox_T), &CommandMailboxDMA);
1392   if (CommandMailbox == NULL)
1393           return false;
1394
1395   CommandMailboxesSize = DAC960_V2_CommandMailboxCount * sizeof(DAC960_V2_CommandMailbox_T);
1396   StatusMailboxesSize = DAC960_V2_StatusMailboxCount * sizeof(DAC960_V2_StatusMailbox_T);
1397   DmaPagesSize =
1398     CommandMailboxesSize + StatusMailboxesSize +
1399     sizeof(DAC960_V2_HealthStatusBuffer_T) +
1400     sizeof(DAC960_V2_ControllerInfo_T) +
1401     sizeof(DAC960_V2_LogicalDeviceInfo_T) +
1402     sizeof(DAC960_V2_PhysicalDeviceInfo_T) +
1403     sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T) +
1404     sizeof(DAC960_V2_Event_T) +
1405     sizeof(DAC960_V2_PhysicalToLogicalDevice_T);
1406
1407   if (!init_dma_loaf(PCI_Device, DmaPages, DmaPagesSize)) {
1408         pci_free_consistent(PCI_Device, sizeof(DAC960_V2_CommandMailbox_T),
1409                                         CommandMailbox, CommandMailboxDMA);
1410         return false;
1411   }
1412
1413   CommandMailboxesMemory = slice_dma_loaf(DmaPages,
1414                 CommandMailboxesSize, &CommandMailboxesMemoryDMA);
1415
1416   /* These are the base addresses for the command memory mailbox array */
1417   Controller->V2.FirstCommandMailbox = CommandMailboxesMemory;
1418   Controller->V2.FirstCommandMailboxDMA = CommandMailboxesMemoryDMA;
1419
1420   CommandMailboxesMemory += DAC960_V2_CommandMailboxCount - 1;
1421   Controller->V2.LastCommandMailbox = CommandMailboxesMemory;
1422   Controller->V2.NextCommandMailbox = Controller->V2.FirstCommandMailbox;
1423   Controller->V2.PreviousCommandMailbox1 = Controller->V2.LastCommandMailbox;
1424   Controller->V2.PreviousCommandMailbox2 =
1425                                         Controller->V2.LastCommandMailbox - 1;
1426
1427   /* These are the base addresses for the status memory mailbox array */
1428   StatusMailboxesMemory = slice_dma_loaf(DmaPages,
1429                 StatusMailboxesSize, &StatusMailboxesMemoryDMA);
1430
1431   Controller->V2.FirstStatusMailbox = StatusMailboxesMemory;
1432   Controller->V2.FirstStatusMailboxDMA = StatusMailboxesMemoryDMA;
1433   StatusMailboxesMemory += DAC960_V2_StatusMailboxCount - 1;
1434   Controller->V2.LastStatusMailbox = StatusMailboxesMemory;
1435   Controller->V2.NextStatusMailbox = Controller->V2.FirstStatusMailbox;
1436
1437   Controller->V2.HealthStatusBuffer = slice_dma_loaf(DmaPages,
1438                 sizeof(DAC960_V2_HealthStatusBuffer_T),
1439                 &Controller->V2.HealthStatusBufferDMA);
1440
1441   Controller->V2.NewControllerInformation = slice_dma_loaf(DmaPages,
1442                 sizeof(DAC960_V2_ControllerInfo_T),
1443                 &Controller->V2.NewControllerInformationDMA);
1444
1445   Controller->V2.NewLogicalDeviceInformation =  slice_dma_loaf(DmaPages,
1446                 sizeof(DAC960_V2_LogicalDeviceInfo_T),
1447                 &Controller->V2.NewLogicalDeviceInformationDMA);
1448
1449   Controller->V2.NewPhysicalDeviceInformation = slice_dma_loaf(DmaPages,
1450                 sizeof(DAC960_V2_PhysicalDeviceInfo_T),
1451                 &Controller->V2.NewPhysicalDeviceInformationDMA);
1452
1453   Controller->V2.NewInquiryUnitSerialNumber = slice_dma_loaf(DmaPages,
1454                 sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T),
1455                 &Controller->V2.NewInquiryUnitSerialNumberDMA);
1456
1457   Controller->V2.Event = slice_dma_loaf(DmaPages,
1458                 sizeof(DAC960_V2_Event_T),
1459                 &Controller->V2.EventDMA);
1460
1461   Controller->V2.PhysicalToLogicalDevice = slice_dma_loaf(DmaPages,
1462                 sizeof(DAC960_V2_PhysicalToLogicalDevice_T),
1463                 &Controller->V2.PhysicalToLogicalDeviceDMA);
1464
1465   /*
1466     Enable the Memory Mailbox Interface.
1467
1468     I don't know why we can't just use one of the memory mailboxes
1469     we just allocated to do this, instead of using this temporary one.
1470     Try this change later.
1471   */
1472   memset(CommandMailbox, 0, sizeof(DAC960_V2_CommandMailbox_T));
1473   CommandMailbox->SetMemoryMailbox.CommandIdentifier = 1;
1474   CommandMailbox->SetMemoryMailbox.CommandOpcode = DAC960_V2_IOCTL;
1475   CommandMailbox->SetMemoryMailbox.CommandControlBits.NoAutoRequestSense = true;
1476   CommandMailbox->SetMemoryMailbox.FirstCommandMailboxSizeKB =
1477     (DAC960_V2_CommandMailboxCount * sizeof(DAC960_V2_CommandMailbox_T)) >> 10;
1478   CommandMailbox->SetMemoryMailbox.FirstStatusMailboxSizeKB =
1479     (DAC960_V2_StatusMailboxCount * sizeof(DAC960_V2_StatusMailbox_T)) >> 10;
1480   CommandMailbox->SetMemoryMailbox.SecondCommandMailboxSizeKB = 0;
1481   CommandMailbox->SetMemoryMailbox.SecondStatusMailboxSizeKB = 0;
1482   CommandMailbox->SetMemoryMailbox.RequestSenseSize = 0;
1483   CommandMailbox->SetMemoryMailbox.IOCTL_Opcode = DAC960_V2_SetMemoryMailbox;
1484   CommandMailbox->SetMemoryMailbox.HealthStatusBufferSizeKB = 1;
1485   CommandMailbox->SetMemoryMailbox.HealthStatusBufferBusAddress =
1486                                         Controller->V2.HealthStatusBufferDMA;
1487   CommandMailbox->SetMemoryMailbox.FirstCommandMailboxBusAddress =
1488                                         Controller->V2.FirstCommandMailboxDMA;
1489   CommandMailbox->SetMemoryMailbox.FirstStatusMailboxBusAddress =
1490                                         Controller->V2.FirstStatusMailboxDMA;
1491   switch (Controller->HardwareType)
1492     {
1493     case DAC960_GEM_Controller:
1494       while (DAC960_GEM_HardwareMailboxFullP(ControllerBaseAddress))
1495         udelay(1);
1496       DAC960_GEM_WriteHardwareMailbox(ControllerBaseAddress, CommandMailboxDMA);
1497       DAC960_GEM_HardwareMailboxNewCommand(ControllerBaseAddress);
1498       while (!DAC960_GEM_HardwareMailboxStatusAvailableP(ControllerBaseAddress))
1499         udelay(1);
1500       CommandStatus = DAC960_GEM_ReadCommandStatus(ControllerBaseAddress);
1501       DAC960_GEM_AcknowledgeHardwareMailboxInterrupt(ControllerBaseAddress);
1502       DAC960_GEM_AcknowledgeHardwareMailboxStatus(ControllerBaseAddress);
1503       break;
1504     case DAC960_BA_Controller:
1505       while (DAC960_BA_HardwareMailboxFullP(ControllerBaseAddress))
1506         udelay(1);
1507       DAC960_BA_WriteHardwareMailbox(ControllerBaseAddress, CommandMailboxDMA);
1508       DAC960_BA_HardwareMailboxNewCommand(ControllerBaseAddress);
1509       while (!DAC960_BA_HardwareMailboxStatusAvailableP(ControllerBaseAddress))
1510         udelay(1);
1511       CommandStatus = DAC960_BA_ReadCommandStatus(ControllerBaseAddress);
1512       DAC960_BA_AcknowledgeHardwareMailboxInterrupt(ControllerBaseAddress);
1513       DAC960_BA_AcknowledgeHardwareMailboxStatus(ControllerBaseAddress);
1514       break;
1515     case DAC960_LP_Controller:
1516       while (DAC960_LP_HardwareMailboxFullP(ControllerBaseAddress))
1517         udelay(1);
1518       DAC960_LP_WriteHardwareMailbox(ControllerBaseAddress, CommandMailboxDMA);
1519       DAC960_LP_HardwareMailboxNewCommand(ControllerBaseAddress);
1520       while (!DAC960_LP_HardwareMailboxStatusAvailableP(ControllerBaseAddress))
1521         udelay(1);
1522       CommandStatus = DAC960_LP_ReadCommandStatus(ControllerBaseAddress);
1523       DAC960_LP_AcknowledgeHardwareMailboxInterrupt(ControllerBaseAddress);
1524       DAC960_LP_AcknowledgeHardwareMailboxStatus(ControllerBaseAddress);
1525       break;
1526     default:
1527       DAC960_Failure(Controller, "Unknown Controller Type\n");
1528       CommandStatus = DAC960_V2_AbormalCompletion;
1529       break;
1530     }
1531   pci_free_consistent(PCI_Device, sizeof(DAC960_V2_CommandMailbox_T),
1532                                         CommandMailbox, CommandMailboxDMA);
1533   return (CommandStatus == DAC960_V2_NormalCompletion);
1534 }
1535
1536
1537 /*
1538   DAC960_V1_ReadControllerConfiguration reads the Configuration Information
1539   from DAC960 V1 Firmware Controllers and initializes the Controller structure.
1540 */
1541
1542 static bool DAC960_V1_ReadControllerConfiguration(DAC960_Controller_T
1543                                                      *Controller)
1544 {
1545   DAC960_V1_Enquiry2_T *Enquiry2;
1546   dma_addr_t Enquiry2DMA;
1547   DAC960_V1_Config2_T *Config2;
1548   dma_addr_t Config2DMA;
1549   int LogicalDriveNumber, Channel, TargetID;
1550   struct dma_loaf local_dma;
1551
1552   if (!init_dma_loaf(Controller->PCIDevice, &local_dma,
1553                 sizeof(DAC960_V1_Enquiry2_T) + sizeof(DAC960_V1_Config2_T)))
1554         return DAC960_Failure(Controller, "LOGICAL DEVICE ALLOCATION");
1555
1556   Enquiry2 = slice_dma_loaf(&local_dma, sizeof(DAC960_V1_Enquiry2_T), &Enquiry2DMA);
1557   Config2 = slice_dma_loaf(&local_dma, sizeof(DAC960_V1_Config2_T), &Config2DMA);
1558
1559   if (!DAC960_V1_ExecuteType3(Controller, DAC960_V1_Enquiry,
1560                               Controller->V1.NewEnquiryDMA)) {
1561     free_dma_loaf(Controller->PCIDevice, &local_dma);
1562     return DAC960_Failure(Controller, "ENQUIRY");
1563   }
1564   memcpy(&Controller->V1.Enquiry, Controller->V1.NewEnquiry,
1565                                                 sizeof(DAC960_V1_Enquiry_T));
1566
1567   if (!DAC960_V1_ExecuteType3(Controller, DAC960_V1_Enquiry2, Enquiry2DMA)) {
1568     free_dma_loaf(Controller->PCIDevice, &local_dma);
1569     return DAC960_Failure(Controller, "ENQUIRY2");
1570   }
1571
1572   if (!DAC960_V1_ExecuteType3(Controller, DAC960_V1_ReadConfig2, Config2DMA)) {
1573     free_dma_loaf(Controller->PCIDevice, &local_dma);
1574     return DAC960_Failure(Controller, "READ CONFIG2");
1575   }
1576
1577   if (!DAC960_V1_ExecuteType3(Controller, DAC960_V1_GetLogicalDriveInformation,
1578                               Controller->V1.NewLogicalDriveInformationDMA)) {
1579     free_dma_loaf(Controller->PCIDevice, &local_dma);
1580     return DAC960_Failure(Controller, "GET LOGICAL DRIVE INFORMATION");
1581   }
1582   memcpy(&Controller->V1.LogicalDriveInformation,
1583                 Controller->V1.NewLogicalDriveInformation,
1584                 sizeof(DAC960_V1_LogicalDriveInformationArray_T));
1585
1586   for (Channel = 0; Channel < Enquiry2->ActualChannels; Channel++)
1587     for (TargetID = 0; TargetID < Enquiry2->MaxTargets; TargetID++) {
1588       if (!DAC960_V1_ExecuteType3D(Controller, DAC960_V1_GetDeviceState,
1589                                    Channel, TargetID,
1590                                    Controller->V1.NewDeviceStateDMA)) {
1591                 free_dma_loaf(Controller->PCIDevice, &local_dma);
1592                 return DAC960_Failure(Controller, "GET DEVICE STATE");
1593         }
1594         memcpy(&Controller->V1.DeviceState[Channel][TargetID],
1595                 Controller->V1.NewDeviceState, sizeof(DAC960_V1_DeviceState_T));
1596      }
1597   /*
1598     Initialize the Controller Model Name and Full Model Name fields.
1599   */
1600   switch (Enquiry2->HardwareID.SubModel)
1601     {
1602     case DAC960_V1_P_PD_PU:
1603       if (Enquiry2->SCSICapability.BusSpeed == DAC960_V1_Ultra)
1604         strcpy(Controller->ModelName, "DAC960PU");
1605       else strcpy(Controller->ModelName, "DAC960PD");
1606       break;
1607     case DAC960_V1_PL:
1608       strcpy(Controller->ModelName, "DAC960PL");
1609       break;
1610     case DAC960_V1_PG:
1611       strcpy(Controller->ModelName, "DAC960PG");
1612       break;
1613     case DAC960_V1_PJ:
1614       strcpy(Controller->ModelName, "DAC960PJ");
1615       break;
1616     case DAC960_V1_PR:
1617       strcpy(Controller->ModelName, "DAC960PR");
1618       break;
1619     case DAC960_V1_PT:
1620       strcpy(Controller->ModelName, "DAC960PT");
1621       break;
1622     case DAC960_V1_PTL0:
1623       strcpy(Controller->ModelName, "DAC960PTL0");
1624       break;
1625     case DAC960_V1_PRL:
1626       strcpy(Controller->ModelName, "DAC960PRL");
1627       break;
1628     case DAC960_V1_PTL1:
1629       strcpy(Controller->ModelName, "DAC960PTL1");
1630       break;
1631     case DAC960_V1_1164P:
1632       strcpy(Controller->ModelName, "DAC1164P");
1633       break;
1634     default:
1635       free_dma_loaf(Controller->PCIDevice, &local_dma);
1636       return DAC960_Failure(Controller, "MODEL VERIFICATION");
1637     }
1638   strcpy(Controller->FullModelName, "Mylex ");
1639   strcat(Controller->FullModelName, Controller->ModelName);
1640   /*
1641     Initialize the Controller Firmware Version field and verify that it
1642     is a supported firmware version.  The supported firmware versions are:
1643
1644     DAC1164P                5.06 and above
1645     DAC960PTL/PRL/PJ/PG     4.06 and above
1646     DAC960PU/PD/PL          3.51 and above
1647     DAC960PU/PD/PL/P        2.73 and above
1648   */
1649 #if defined(CONFIG_ALPHA)
1650   /*
1651     DEC Alpha machines were often equipped with DAC960 cards that were
1652     OEMed from Mylex, and had their own custom firmware. Version 2.70,
1653     the last custom FW revision to be released by DEC for these older
1654     controllers, appears to work quite well with this driver.
1655
1656     Cards tested successfully were several versions each of the PD and
1657     PU, called by DEC the KZPSC and KZPAC, respectively, and having
1658     the Manufacturer Numbers (from Mylex), usually on a sticker on the
1659     back of the board, of:
1660
1661     KZPSC:  D040347 (1-channel) or D040348 (2-channel) or D040349 (3-channel)
1662     KZPAC:  D040395 (1-channel) or D040396 (2-channel) or D040397 (3-channel)
1663   */
1664 # define FIRMWARE_27X   "2.70"
1665 #else
1666 # define FIRMWARE_27X   "2.73"
1667 #endif
1668
1669   if (Enquiry2->FirmwareID.MajorVersion == 0)
1670     {
1671       Enquiry2->FirmwareID.MajorVersion =
1672         Controller->V1.Enquiry.MajorFirmwareVersion;
1673       Enquiry2->FirmwareID.MinorVersion =
1674         Controller->V1.Enquiry.MinorFirmwareVersion;
1675       Enquiry2->FirmwareID.FirmwareType = '0';
1676       Enquiry2->FirmwareID.TurnID = 0;
1677     }
1678   sprintf(Controller->FirmwareVersion, "%d.%02d-%c-%02d",
1679           Enquiry2->FirmwareID.MajorVersion, Enquiry2->FirmwareID.MinorVersion,
1680           Enquiry2->FirmwareID.FirmwareType, Enquiry2->FirmwareID.TurnID);
1681   if (!((Controller->FirmwareVersion[0] == '5' &&
1682          strcmp(Controller->FirmwareVersion, "5.06") >= 0) ||
1683         (Controller->FirmwareVersion[0] == '4' &&
1684          strcmp(Controller->FirmwareVersion, "4.06") >= 0) ||
1685         (Controller->FirmwareVersion[0] == '3' &&
1686          strcmp(Controller->FirmwareVersion, "3.51") >= 0) ||
1687         (Controller->FirmwareVersion[0] == '2' &&
1688          strcmp(Controller->FirmwareVersion, FIRMWARE_27X) >= 0)))
1689     {
1690       DAC960_Failure(Controller, "FIRMWARE VERSION VERIFICATION");
1691       DAC960_Error("Firmware Version = '%s'\n", Controller,
1692                    Controller->FirmwareVersion);
1693       free_dma_loaf(Controller->PCIDevice, &local_dma);
1694       return false;
1695     }
1696   /*
1697     Initialize the Controller Channels, Targets, Memory Size, and SAF-TE
1698     Enclosure Management Enabled fields.
1699   */
1700   Controller->Channels = Enquiry2->ActualChannels;
1701   Controller->Targets = Enquiry2->MaxTargets;
1702   Controller->MemorySize = Enquiry2->MemorySize >> 20;
1703   Controller->V1.SAFTE_EnclosureManagementEnabled =
1704     (Enquiry2->FaultManagementType == DAC960_V1_SAFTE);
1705   /*
1706     Initialize the Controller Queue Depth, Driver Queue Depth, Logical Drive
1707     Count, Maximum Blocks per Command, Controller Scatter/Gather Limit, and
1708     Driver Scatter/Gather Limit.  The Driver Queue Depth must be at most one
1709     less than the Controller Queue Depth to allow for an automatic drive
1710     rebuild operation.
1711   */
1712   Controller->ControllerQueueDepth = Controller->V1.Enquiry.MaxCommands;
1713   Controller->DriverQueueDepth = Controller->ControllerQueueDepth - 1;
1714   if (Controller->DriverQueueDepth > DAC960_MaxDriverQueueDepth)
1715     Controller->DriverQueueDepth = DAC960_MaxDriverQueueDepth;
1716   Controller->LogicalDriveCount =
1717     Controller->V1.Enquiry.NumberOfLogicalDrives;
1718   Controller->MaxBlocksPerCommand = Enquiry2->MaxBlocksPerCommand;
1719   Controller->ControllerScatterGatherLimit = Enquiry2->MaxScatterGatherEntries;
1720   Controller->DriverScatterGatherLimit =
1721     Controller->ControllerScatterGatherLimit;
1722   if (Controller->DriverScatterGatherLimit > DAC960_V1_ScatterGatherLimit)
1723     Controller->DriverScatterGatherLimit = DAC960_V1_ScatterGatherLimit;
1724   /*
1725     Initialize the Stripe Size, Segment Size, and Geometry Translation.
1726   */
1727   Controller->V1.StripeSize = Config2->BlocksPerStripe * Config2->BlockFactor
1728                               >> (10 - DAC960_BlockSizeBits);
1729   Controller->V1.SegmentSize = Config2->BlocksPerCacheLine * Config2->BlockFactor
1730                                >> (10 - DAC960_BlockSizeBits);
1731   switch (Config2->DriveGeometry)
1732     {
1733     case DAC960_V1_Geometry_128_32:
1734       Controller->V1.GeometryTranslationHeads = 128;
1735       Controller->V1.GeometryTranslationSectors = 32;
1736       break;
1737     case DAC960_V1_Geometry_255_63:
1738       Controller->V1.GeometryTranslationHeads = 255;
1739       Controller->V1.GeometryTranslationSectors = 63;
1740       break;
1741     default:
1742       free_dma_loaf(Controller->PCIDevice, &local_dma);
1743       return DAC960_Failure(Controller, "CONFIG2 DRIVE GEOMETRY");
1744     }
1745   /*
1746     Initialize the Background Initialization Status.
1747   */
1748   if ((Controller->FirmwareVersion[0] == '4' &&
1749       strcmp(Controller->FirmwareVersion, "4.08") >= 0) ||
1750       (Controller->FirmwareVersion[0] == '5' &&
1751        strcmp(Controller->FirmwareVersion, "5.08") >= 0))
1752     {
1753       Controller->V1.BackgroundInitializationStatusSupported = true;
1754       DAC960_V1_ExecuteType3B(Controller,
1755                               DAC960_V1_BackgroundInitializationControl, 0x20,
1756                               Controller->
1757                                V1.BackgroundInitializationStatusDMA);
1758       memcpy(&Controller->V1.LastBackgroundInitializationStatus,
1759                 Controller->V1.BackgroundInitializationStatus,
1760                 sizeof(DAC960_V1_BackgroundInitializationStatus_T));
1761     }
1762   /*
1763     Initialize the Logical Drive Initially Accessible flag.
1764   */
1765   for (LogicalDriveNumber = 0;
1766        LogicalDriveNumber < Controller->LogicalDriveCount;
1767        LogicalDriveNumber++)
1768     if (Controller->V1.LogicalDriveInformation
1769                        [LogicalDriveNumber].LogicalDriveState !=
1770         DAC960_V1_LogicalDrive_Offline)
1771       Controller->LogicalDriveInitiallyAccessible[LogicalDriveNumber] = true;
1772   Controller->V1.LastRebuildStatus = DAC960_V1_NoRebuildOrCheckInProgress;
1773   free_dma_loaf(Controller->PCIDevice, &local_dma);
1774   return true;
1775 }
1776
1777
1778 /*
1779   DAC960_V2_ReadControllerConfiguration reads the Configuration Information
1780   from DAC960 V2 Firmware Controllers and initializes the Controller structure.
1781 */
1782
1783 static bool DAC960_V2_ReadControllerConfiguration(DAC960_Controller_T
1784                                                      *Controller)
1785 {
1786   DAC960_V2_ControllerInfo_T *ControllerInfo =
1787                 &Controller->V2.ControllerInformation;
1788   unsigned short LogicalDeviceNumber = 0;
1789   int ModelNameLength;
1790
1791   /* Get data into dma-able area, then copy into permanant location */
1792   if (!DAC960_V2_NewControllerInfo(Controller))
1793     return DAC960_Failure(Controller, "GET CONTROLLER INFO");
1794   memcpy(ControllerInfo, Controller->V2.NewControllerInformation,
1795                         sizeof(DAC960_V2_ControllerInfo_T));
1796
1797
1798   if (!DAC960_V2_GeneralInfo(Controller))
1799     return DAC960_Failure(Controller, "GET HEALTH STATUS");
1800
1801   /*
1802     Initialize the Controller Model Name and Full Model Name fields.
1803   */
1804   ModelNameLength = sizeof(ControllerInfo->ControllerName);
1805   if (ModelNameLength > sizeof(Controller->ModelName)-1)
1806     ModelNameLength = sizeof(Controller->ModelName)-1;
1807   memcpy(Controller->ModelName, ControllerInfo->ControllerName,
1808          ModelNameLength);
1809   ModelNameLength--;
1810   while (Controller->ModelName[ModelNameLength] == ' ' ||
1811          Controller->ModelName[ModelNameLength] == '\0')
1812     ModelNameLength--;
1813   Controller->ModelName[++ModelNameLength] = '\0';
1814   strcpy(Controller->FullModelName, "Mylex ");
1815   strcat(Controller->FullModelName, Controller->ModelName);
1816   /*
1817     Initialize the Controller Firmware Version field.
1818   */
1819   sprintf(Controller->FirmwareVersion, "%d.%02d-%02d",
1820           ControllerInfo->FirmwareMajorVersion,
1821           ControllerInfo->FirmwareMinorVersion,
1822           ControllerInfo->FirmwareTurnNumber);
1823   if (ControllerInfo->FirmwareMajorVersion == 6 &&
1824       ControllerInfo->FirmwareMinorVersion == 0 &&
1825       ControllerInfo->FirmwareTurnNumber < 1)
1826     {
1827       DAC960_Info("FIRMWARE VERSION %s DOES NOT PROVIDE THE CONTROLLER\n",
1828                   Controller, Controller->FirmwareVersion);
1829       DAC960_Info("STATUS MONITORING FUNCTIONALITY NEEDED BY THIS DRIVER.\n",
1830                   Controller);
1831       DAC960_Info("PLEASE UPGRADE TO VERSION 6.00-01 OR ABOVE.\n",
1832                   Controller);
1833     }
1834   /*
1835     Initialize the Controller Channels, Targets, and Memory Size.
1836   */
1837   Controller->Channels = ControllerInfo->NumberOfPhysicalChannelsPresent;
1838   Controller->Targets =
1839     ControllerInfo->MaximumTargetsPerChannel
1840                     [ControllerInfo->NumberOfPhysicalChannelsPresent-1];
1841   Controller->MemorySize = ControllerInfo->MemorySizeMB;
1842   /*
1843     Initialize the Controller Queue Depth, Driver Queue Depth, Logical Drive
1844     Count, Maximum Blocks per Command, Controller Scatter/Gather Limit, and
1845     Driver Scatter/Gather Limit.  The Driver Queue Depth must be at most one
1846     less than the Controller Queue Depth to allow for an automatic drive
1847     rebuild operation.
1848   */
1849   Controller->ControllerQueueDepth = ControllerInfo->MaximumParallelCommands;
1850   Controller->DriverQueueDepth = Controller->ControllerQueueDepth - 1;
1851   if (Controller->DriverQueueDepth > DAC960_MaxDriverQueueDepth)
1852     Controller->DriverQueueDepth = DAC960_MaxDriverQueueDepth;
1853   Controller->LogicalDriveCount = ControllerInfo->LogicalDevicesPresent;
1854   Controller->MaxBlocksPerCommand =
1855     ControllerInfo->MaximumDataTransferSizeInBlocks;
1856   Controller->ControllerScatterGatherLimit =
1857     ControllerInfo->MaximumScatterGatherEntries;
1858   Controller->DriverScatterGatherLimit =
1859     Controller->ControllerScatterGatherLimit;
1860   if (Controller->DriverScatterGatherLimit > DAC960_V2_ScatterGatherLimit)
1861     Controller->DriverScatterGatherLimit = DAC960_V2_ScatterGatherLimit;
1862   /*
1863     Initialize the Logical Device Information.
1864   */
1865   while (true)
1866     {
1867       DAC960_V2_LogicalDeviceInfo_T *NewLogicalDeviceInfo =
1868         Controller->V2.NewLogicalDeviceInformation;
1869       DAC960_V2_LogicalDeviceInfo_T *LogicalDeviceInfo;
1870       DAC960_V2_PhysicalDevice_T PhysicalDevice;
1871
1872       if (!DAC960_V2_NewLogicalDeviceInfo(Controller, LogicalDeviceNumber))
1873         break;
1874       LogicalDeviceNumber = NewLogicalDeviceInfo->LogicalDeviceNumber;
1875       if (LogicalDeviceNumber >= DAC960_MaxLogicalDrives) {
1876         DAC960_Error("DAC960: Logical Drive Number %d not supported\n",
1877                        Controller, LogicalDeviceNumber);
1878                 break;
1879       }
1880       if (NewLogicalDeviceInfo->DeviceBlockSizeInBytes != DAC960_BlockSize) {
1881         DAC960_Error("DAC960: Logical Drive Block Size %d not supported\n",
1882               Controller, NewLogicalDeviceInfo->DeviceBlockSizeInBytes);
1883         LogicalDeviceNumber++;
1884         continue;
1885       }
1886       PhysicalDevice.Controller = 0;
1887       PhysicalDevice.Channel = NewLogicalDeviceInfo->Channel;
1888       PhysicalDevice.TargetID = NewLogicalDeviceInfo->TargetID;
1889       PhysicalDevice.LogicalUnit = NewLogicalDeviceInfo->LogicalUnit;
1890       Controller->V2.LogicalDriveToVirtualDevice[LogicalDeviceNumber] =
1891         PhysicalDevice;
1892       if (NewLogicalDeviceInfo->LogicalDeviceState !=
1893           DAC960_V2_LogicalDevice_Offline)
1894         Controller->LogicalDriveInitiallyAccessible[LogicalDeviceNumber] = true;
1895       LogicalDeviceInfo = kmalloc(sizeof(DAC960_V2_LogicalDeviceInfo_T),
1896                                    GFP_ATOMIC);
1897       if (LogicalDeviceInfo == NULL)
1898         return DAC960_Failure(Controller, "LOGICAL DEVICE ALLOCATION");
1899       Controller->V2.LogicalDeviceInformation[LogicalDeviceNumber] =
1900         LogicalDeviceInfo;
1901       memcpy(LogicalDeviceInfo, NewLogicalDeviceInfo,
1902              sizeof(DAC960_V2_LogicalDeviceInfo_T));
1903       LogicalDeviceNumber++;
1904     }
1905   return true;
1906 }
1907
1908
1909 /*
1910   DAC960_ReportControllerConfiguration reports the Configuration Information
1911   for Controller.
1912 */
1913
1914 static bool DAC960_ReportControllerConfiguration(DAC960_Controller_T
1915                                                     *Controller)
1916 {
1917   DAC960_Info("Configuring Mylex %s PCI RAID Controller\n",
1918               Controller, Controller->ModelName);
1919   DAC960_Info("  Firmware Version: %s, Channels: %d, Memory Size: %dMB\n",
1920               Controller, Controller->FirmwareVersion,
1921               Controller->Channels, Controller->MemorySize);
1922   DAC960_Info("  PCI Bus: %d, Device: %d, Function: %d, I/O Address: ",
1923               Controller, Controller->Bus,
1924               Controller->Device, Controller->Function);
1925   if (Controller->IO_Address == 0)
1926     DAC960_Info("Unassigned\n", Controller);
1927   else DAC960_Info("0x%X\n", Controller, Controller->IO_Address);
1928   DAC960_Info("  PCI Address: 0x%X mapped at 0x%lX, IRQ Channel: %d\n",
1929               Controller, Controller->PCI_Address,
1930               (unsigned long) Controller->BaseAddress,
1931               Controller->IRQ_Channel);
1932   DAC960_Info("  Controller Queue Depth: %d, "
1933               "Maximum Blocks per Command: %d\n",
1934               Controller, Controller->ControllerQueueDepth,
1935               Controller->MaxBlocksPerCommand);
1936   DAC960_Info("  Driver Queue Depth: %d, "
1937               "Scatter/Gather Limit: %d of %d Segments\n",
1938               Controller, Controller->DriverQueueDepth,
1939               Controller->DriverScatterGatherLimit,
1940               Controller->ControllerScatterGatherLimit);
1941   if (Controller->FirmwareType == DAC960_V1_Controller)
1942     {
1943       DAC960_Info("  Stripe Size: %dKB, Segment Size: %dKB, "
1944                   "BIOS Geometry: %d/%d\n", Controller,
1945                   Controller->V1.StripeSize,
1946                   Controller->V1.SegmentSize,
1947                   Controller->V1.GeometryTranslationHeads,
1948                   Controller->V1.GeometryTranslationSectors);
1949       if (Controller->V1.SAFTE_EnclosureManagementEnabled)
1950         DAC960_Info("  SAF-TE Enclosure Management Enabled\n", Controller);
1951     }
1952   return true;
1953 }
1954
1955
1956 /*
1957   DAC960_V1_ReadDeviceConfiguration reads the Device Configuration Information
1958   for DAC960 V1 Firmware Controllers by requesting the SCSI Inquiry and SCSI
1959   Inquiry Unit Serial Number information for each device connected to
1960   Controller.
1961 */
1962
1963 static bool DAC960_V1_ReadDeviceConfiguration(DAC960_Controller_T
1964                                                  *Controller)
1965 {
1966   struct dma_loaf local_dma;
1967
1968   dma_addr_t DCDBs_dma[DAC960_V1_MaxChannels];
1969   DAC960_V1_DCDB_T *DCDBs_cpu[DAC960_V1_MaxChannels];
1970
1971   dma_addr_t SCSI_Inquiry_dma[DAC960_V1_MaxChannels];
1972   DAC960_SCSI_Inquiry_T *SCSI_Inquiry_cpu[DAC960_V1_MaxChannels];
1973
1974   dma_addr_t SCSI_NewInquiryUnitSerialNumberDMA[DAC960_V1_MaxChannels];
1975   DAC960_SCSI_Inquiry_UnitSerialNumber_T *SCSI_NewInquiryUnitSerialNumberCPU[DAC960_V1_MaxChannels];
1976
1977   struct completion Completions[DAC960_V1_MaxChannels];
1978   unsigned long flags;
1979   int Channel, TargetID;
1980
1981   if (!init_dma_loaf(Controller->PCIDevice, &local_dma,
1982                 DAC960_V1_MaxChannels*(sizeof(DAC960_V1_DCDB_T) +
1983                         sizeof(DAC960_SCSI_Inquiry_T) +
1984                         sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T))))
1985      return DAC960_Failure(Controller,
1986                         "DMA ALLOCATION FAILED IN ReadDeviceConfiguration");
1987
1988   for (Channel = 0; Channel < Controller->Channels; Channel++) {
1989         DCDBs_cpu[Channel] = slice_dma_loaf(&local_dma,
1990                         sizeof(DAC960_V1_DCDB_T), DCDBs_dma + Channel);
1991         SCSI_Inquiry_cpu[Channel] = slice_dma_loaf(&local_dma,
1992                         sizeof(DAC960_SCSI_Inquiry_T),
1993                         SCSI_Inquiry_dma + Channel);
1994         SCSI_NewInquiryUnitSerialNumberCPU[Channel] = slice_dma_loaf(&local_dma,
1995                         sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T),
1996                         SCSI_NewInquiryUnitSerialNumberDMA + Channel);
1997   }
1998
1999   for (TargetID = 0; TargetID < Controller->Targets; TargetID++)
2000     {
2001       /*
2002        * For each channel, submit a probe for a device on that channel.
2003        * The timeout interval for a device that is present is 10 seconds.
2004        * With this approach, the timeout periods can elapse in parallel
2005        * on each channel.
2006        */
2007       for (Channel = 0; Channel < Controller->Channels; Channel++)
2008         {
2009           dma_addr_t NewInquiryStandardDataDMA = SCSI_Inquiry_dma[Channel];
2010           DAC960_V1_DCDB_T *DCDB = DCDBs_cpu[Channel];
2011           dma_addr_t DCDB_dma = DCDBs_dma[Channel];
2012           DAC960_Command_T *Command = Controller->Commands[Channel];
2013           struct completion *Completion = &Completions[Channel];
2014
2015           init_completion(Completion);
2016           DAC960_V1_ClearCommand(Command);
2017           Command->CommandType = DAC960_ImmediateCommand;
2018           Command->Completion = Completion;
2019           Command->V1.CommandMailbox.Type3.CommandOpcode = DAC960_V1_DCDB;
2020           Command->V1.CommandMailbox.Type3.BusAddress = DCDB_dma;
2021           DCDB->Channel = Channel;
2022           DCDB->TargetID = TargetID;
2023           DCDB->Direction = DAC960_V1_DCDB_DataTransferDeviceToSystem;
2024           DCDB->EarlyStatus = false;
2025           DCDB->Timeout = DAC960_V1_DCDB_Timeout_10_seconds;
2026           DCDB->NoAutomaticRequestSense = false;
2027           DCDB->DisconnectPermitted = true;
2028           DCDB->TransferLength = sizeof(DAC960_SCSI_Inquiry_T);
2029           DCDB->BusAddress = NewInquiryStandardDataDMA;
2030           DCDB->CDBLength = 6;
2031           DCDB->TransferLengthHigh4 = 0;
2032           DCDB->SenseLength = sizeof(DCDB->SenseData);
2033           DCDB->CDB[0] = 0x12; /* INQUIRY */
2034           DCDB->CDB[1] = 0; /* EVPD = 0 */
2035           DCDB->CDB[2] = 0; /* Page Code */
2036           DCDB->CDB[3] = 0; /* Reserved */
2037           DCDB->CDB[4] = sizeof(DAC960_SCSI_Inquiry_T);
2038           DCDB->CDB[5] = 0; /* Control */
2039
2040           spin_lock_irqsave(&Controller->queue_lock, flags);
2041           DAC960_QueueCommand(Command);
2042           spin_unlock_irqrestore(&Controller->queue_lock, flags);
2043         }
2044       /*
2045        * Wait for the problems submitted in the previous loop
2046        * to complete.  On the probes that are successful,
2047        * get the serial number of the device that was found.
2048        */
2049       for (Channel = 0; Channel < Controller->Channels; Channel++)
2050         {
2051           DAC960_SCSI_Inquiry_T *InquiryStandardData =
2052             &Controller->V1.InquiryStandardData[Channel][TargetID];
2053           DAC960_SCSI_Inquiry_T *NewInquiryStandardData = SCSI_Inquiry_cpu[Channel];
2054           dma_addr_t NewInquiryUnitSerialNumberDMA =
2055                         SCSI_NewInquiryUnitSerialNumberDMA[Channel];
2056           DAC960_SCSI_Inquiry_UnitSerialNumber_T *NewInquiryUnitSerialNumber =
2057                         SCSI_NewInquiryUnitSerialNumberCPU[Channel];
2058           DAC960_SCSI_Inquiry_UnitSerialNumber_T *InquiryUnitSerialNumber =
2059             &Controller->V1.InquiryUnitSerialNumber[Channel][TargetID];
2060           DAC960_Command_T *Command = Controller->Commands[Channel];
2061           DAC960_V1_DCDB_T *DCDB = DCDBs_cpu[Channel];
2062           struct completion *Completion = &Completions[Channel];
2063
2064           wait_for_completion(Completion);
2065
2066           if (Command->V1.CommandStatus != DAC960_V1_NormalCompletion) {
2067             memset(InquiryStandardData, 0, sizeof(DAC960_SCSI_Inquiry_T));
2068             InquiryStandardData->PeripheralDeviceType = 0x1F;
2069             continue;
2070           } else
2071             memcpy(InquiryStandardData, NewInquiryStandardData, sizeof(DAC960_SCSI_Inquiry_T));
2072
2073           /* Preserve Channel and TargetID values from the previous loop */
2074           Command->Completion = Completion;
2075           DCDB->TransferLength = sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T);
2076           DCDB->BusAddress = NewInquiryUnitSerialNumberDMA;
2077           DCDB->SenseLength = sizeof(DCDB->SenseData);
2078           DCDB->CDB[0] = 0x12; /* INQUIRY */
2079           DCDB->CDB[1] = 1; /* EVPD = 1 */
2080           DCDB->CDB[2] = 0x80; /* Page Code */
2081           DCDB->CDB[3] = 0; /* Reserved */
2082           DCDB->CDB[4] = sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T);
2083           DCDB->CDB[5] = 0; /* Control */
2084
2085           spin_lock_irqsave(&Controller->queue_lock, flags);
2086           DAC960_QueueCommand(Command);
2087           spin_unlock_irqrestore(&Controller->queue_lock, flags);
2088           wait_for_completion(Completion);
2089
2090           if (Command->V1.CommandStatus != DAC960_V1_NormalCompletion) {
2091                 memset(InquiryUnitSerialNumber, 0,
2092                         sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T));
2093                 InquiryUnitSerialNumber->PeripheralDeviceType = 0x1F;
2094           } else
2095                 memcpy(InquiryUnitSerialNumber, NewInquiryUnitSerialNumber,
2096                         sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T));
2097         }
2098     }
2099     free_dma_loaf(Controller->PCIDevice, &local_dma);
2100   return true;
2101 }
2102
2103
2104 /*
2105   DAC960_V2_ReadDeviceConfiguration reads the Device Configuration Information
2106   for DAC960 V2 Firmware Controllers by requesting the Physical Device
2107   Information and SCSI Inquiry Unit Serial Number information for each
2108   device connected to Controller.
2109 */
2110
2111 static bool DAC960_V2_ReadDeviceConfiguration(DAC960_Controller_T
2112                                                  *Controller)
2113 {
2114   unsigned char Channel = 0, TargetID = 0, LogicalUnit = 0;
2115   unsigned short PhysicalDeviceIndex = 0;
2116
2117   while (true)
2118     {
2119       DAC960_V2_PhysicalDeviceInfo_T *NewPhysicalDeviceInfo =
2120                 Controller->V2.NewPhysicalDeviceInformation;
2121       DAC960_V2_PhysicalDeviceInfo_T *PhysicalDeviceInfo;
2122       DAC960_SCSI_Inquiry_UnitSerialNumber_T *NewInquiryUnitSerialNumber =
2123                 Controller->V2.NewInquiryUnitSerialNumber;
2124       DAC960_SCSI_Inquiry_UnitSerialNumber_T *InquiryUnitSerialNumber;
2125
2126       if (!DAC960_V2_NewPhysicalDeviceInfo(Controller, Channel, TargetID, LogicalUnit))
2127           break;
2128
2129       PhysicalDeviceInfo = kmalloc(sizeof(DAC960_V2_PhysicalDeviceInfo_T),
2130                                     GFP_ATOMIC);
2131       if (PhysicalDeviceInfo == NULL)
2132                 return DAC960_Failure(Controller, "PHYSICAL DEVICE ALLOCATION");
2133       Controller->V2.PhysicalDeviceInformation[PhysicalDeviceIndex] =
2134                 PhysicalDeviceInfo;
2135       memcpy(PhysicalDeviceInfo, NewPhysicalDeviceInfo,
2136                 sizeof(DAC960_V2_PhysicalDeviceInfo_T));
2137
2138       InquiryUnitSerialNumber = kmalloc(
2139               sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T), GFP_ATOMIC);
2140       if (InquiryUnitSerialNumber == NULL) {
2141         kfree(PhysicalDeviceInfo);
2142         return DAC960_Failure(Controller, "SERIAL NUMBER ALLOCATION");
2143       }
2144       Controller->V2.InquiryUnitSerialNumber[PhysicalDeviceIndex] =
2145                 InquiryUnitSerialNumber;
2146
2147       Channel = NewPhysicalDeviceInfo->Channel;
2148       TargetID = NewPhysicalDeviceInfo->TargetID;
2149       LogicalUnit = NewPhysicalDeviceInfo->LogicalUnit;
2150
2151       /*
2152          Some devices do NOT have Unit Serial Numbers.
2153          This command fails for them.  But, we still want to
2154          remember those devices are there.  Construct a
2155          UnitSerialNumber structure for the failure case.
2156       */
2157       if (!DAC960_V2_NewInquiryUnitSerialNumber(Controller, Channel, TargetID, LogicalUnit)) {
2158         memset(InquiryUnitSerialNumber, 0,
2159              sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T));
2160         InquiryUnitSerialNumber->PeripheralDeviceType = 0x1F;
2161       } else
2162         memcpy(InquiryUnitSerialNumber, NewInquiryUnitSerialNumber,
2163                 sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T));
2164
2165       PhysicalDeviceIndex++;
2166       LogicalUnit++;
2167     }
2168   return true;
2169 }
2170
2171
2172 /*
2173   DAC960_SanitizeInquiryData sanitizes the Vendor, Model, Revision, and
2174   Product Serial Number fields of the Inquiry Standard Data and Inquiry
2175   Unit Serial Number structures.
2176 */
2177
2178 static void DAC960_SanitizeInquiryData(DAC960_SCSI_Inquiry_T
2179                                          *InquiryStandardData,
2180                                        DAC960_SCSI_Inquiry_UnitSerialNumber_T
2181                                          *InquiryUnitSerialNumber,
2182                                        unsigned char *Vendor,
2183                                        unsigned char *Model,
2184                                        unsigned char *Revision,
2185                                        unsigned char *SerialNumber)
2186 {
2187   int SerialNumberLength, i;
2188   if (InquiryStandardData->PeripheralDeviceType == 0x1F) return;
2189   for (i = 0; i < sizeof(InquiryStandardData->VendorIdentification); i++)
2190     {
2191       unsigned char VendorCharacter =
2192         InquiryStandardData->VendorIdentification[i];
2193       Vendor[i] = (VendorCharacter >= ' ' && VendorCharacter <= '~'
2194                    ? VendorCharacter : ' ');
2195     }
2196   Vendor[sizeof(InquiryStandardData->VendorIdentification)] = '\0';
2197   for (i = 0; i < sizeof(InquiryStandardData->ProductIdentification); i++)
2198     {
2199       unsigned char ModelCharacter =
2200         InquiryStandardData->ProductIdentification[i];
2201       Model[i] = (ModelCharacter >= ' ' && ModelCharacter <= '~'
2202                   ? ModelCharacter : ' ');
2203     }
2204   Model[sizeof(InquiryStandardData->ProductIdentification)] = '\0';
2205   for (i = 0; i < sizeof(InquiryStandardData->ProductRevisionLevel); i++)
2206     {
2207       unsigned char RevisionCharacter =
2208         InquiryStandardData->ProductRevisionLevel[i];
2209       Revision[i] = (RevisionCharacter >= ' ' && RevisionCharacter <= '~'
2210                      ? RevisionCharacter : ' ');
2211     }
2212   Revision[sizeof(InquiryStandardData->ProductRevisionLevel)] = '\0';
2213   if (InquiryUnitSerialNumber->PeripheralDeviceType == 0x1F) return;
2214   SerialNumberLength = InquiryUnitSerialNumber->PageLength;
2215   if (SerialNumberLength >
2216       sizeof(InquiryUnitSerialNumber->ProductSerialNumber))
2217     SerialNumberLength = sizeof(InquiryUnitSerialNumber->ProductSerialNumber);
2218   for (i = 0; i < SerialNumberLength; i++)
2219     {
2220       unsigned char SerialNumberCharacter =
2221         InquiryUnitSerialNumber->ProductSerialNumber[i];
2222       SerialNumber[i] =
2223         (SerialNumberCharacter >= ' ' && SerialNumberCharacter <= '~'
2224          ? SerialNumberCharacter : ' ');
2225     }
2226   SerialNumber[SerialNumberLength] = '\0';
2227 }
2228
2229
2230 /*
2231   DAC960_V1_ReportDeviceConfiguration reports the Device Configuration
2232   Information for DAC960 V1 Firmware Controllers.
2233 */
2234
2235 static bool DAC960_V1_ReportDeviceConfiguration(DAC960_Controller_T
2236                                                    *Controller)
2237 {
2238   int LogicalDriveNumber, Channel, TargetID;
2239   DAC960_Info("  Physical Devices:\n", Controller);
2240   for (Channel = 0; Channel < Controller->Channels; Channel++)
2241     for (TargetID = 0; TargetID < Controller->Targets; TargetID++)
2242       {
2243         DAC960_SCSI_Inquiry_T *InquiryStandardData =
2244           &Controller->V1.InquiryStandardData[Channel][TargetID];
2245         DAC960_SCSI_Inquiry_UnitSerialNumber_T *InquiryUnitSerialNumber =
2246           &Controller->V1.InquiryUnitSerialNumber[Channel][TargetID];
2247         DAC960_V1_DeviceState_T *DeviceState =
2248           &Controller->V1.DeviceState[Channel][TargetID];
2249         DAC960_V1_ErrorTableEntry_T *ErrorEntry =
2250           &Controller->V1.ErrorTable.ErrorTableEntries[Channel][TargetID];
2251         char Vendor[1+sizeof(InquiryStandardData->VendorIdentification)];
2252         char Model[1+sizeof(InquiryStandardData->ProductIdentification)];
2253         char Revision[1+sizeof(InquiryStandardData->ProductRevisionLevel)];
2254         char SerialNumber[1+sizeof(InquiryUnitSerialNumber
2255                                    ->ProductSerialNumber)];
2256         if (InquiryStandardData->PeripheralDeviceType == 0x1F) continue;
2257         DAC960_SanitizeInquiryData(InquiryStandardData, InquiryUnitSerialNumber,
2258                                    Vendor, Model, Revision, SerialNumber);
2259         DAC960_Info("    %d:%d%s Vendor: %s  Model: %s  Revision: %s\n",
2260                     Controller, Channel, TargetID, (TargetID < 10 ? " " : ""),
2261                     Vendor, Model, Revision);
2262         if (InquiryUnitSerialNumber->PeripheralDeviceType != 0x1F)
2263           DAC960_Info("         Serial Number: %s\n", Controller, SerialNumber);
2264         if (DeviceState->Present &&
2265             DeviceState->DeviceType == DAC960_V1_DiskType)
2266           {
2267             if (Controller->V1.DeviceResetCount[Channel][TargetID] > 0)
2268               DAC960_Info("         Disk Status: %s, %u blocks, %d resets\n",
2269                           Controller,
2270                           (DeviceState->DeviceState == DAC960_V1_Device_Dead
2271                            ? "Dead"
2272                            : DeviceState->DeviceState
2273                              == DAC960_V1_Device_WriteOnly
2274                              ? "Write-Only"
2275                              : DeviceState->DeviceState
2276                                == DAC960_V1_Device_Online
2277                                ? "Online" : "Standby"),
2278                           DeviceState->DiskSize,
2279                           Controller->V1.DeviceResetCount[Channel][TargetID]);
2280             else
2281               DAC960_Info("         Disk Status: %s, %u blocks\n", Controller,
2282                           (DeviceState->DeviceState == DAC960_V1_Device_Dead
2283                            ? "Dead"
2284                            : DeviceState->DeviceState
2285                              == DAC960_V1_Device_WriteOnly
2286                              ? "Write-Only"
2287                              : DeviceState->DeviceState
2288                                == DAC960_V1_Device_Online
2289                                ? "Online" : "Standby"),
2290                           DeviceState->DiskSize);
2291           }
2292         if (ErrorEntry->ParityErrorCount > 0 ||
2293             ErrorEntry->SoftErrorCount > 0 ||
2294             ErrorEntry->HardErrorCount > 0 ||
2295             ErrorEntry->MiscErrorCount > 0)
2296           DAC960_Info("         Errors - Parity: %d, Soft: %d, "
2297                       "Hard: %d, Misc: %d\n", Controller,
2298                       ErrorEntry->ParityErrorCount,
2299                       ErrorEntry->SoftErrorCount,
2300                       ErrorEntry->HardErrorCount,
2301                       ErrorEntry->MiscErrorCount);
2302       }
2303   DAC960_Info("  Logical Drives:\n", Controller);
2304   for (LogicalDriveNumber = 0;
2305        LogicalDriveNumber < Controller->LogicalDriveCount;
2306        LogicalDriveNumber++)
2307     {
2308       DAC960_V1_LogicalDriveInformation_T *LogicalDriveInformation =
2309         &Controller->V1.LogicalDriveInformation[LogicalDriveNumber];
2310       DAC960_Info("    /dev/rd/c%dd%d: RAID-%d, %s, %u blocks, %s\n",
2311                   Controller, Controller->ControllerNumber, LogicalDriveNumber,
2312                   LogicalDriveInformation->RAIDLevel,
2313                   (LogicalDriveInformation->LogicalDriveState
2314                    == DAC960_V1_LogicalDrive_Online
2315                    ? "Online"
2316                    : LogicalDriveInformation->LogicalDriveState
2317                      == DAC960_V1_LogicalDrive_Critical
2318                      ? "Critical" : "Offline"),
2319                   LogicalDriveInformation->LogicalDriveSize,
2320                   (LogicalDriveInformation->WriteBack
2321                    ? "Write Back" : "Write Thru"));
2322     }
2323   return true;
2324 }
2325
2326
2327 /*
2328   DAC960_V2_ReportDeviceConfiguration reports the Device Configuration
2329   Information for DAC960 V2 Firmware Controllers.
2330 */
2331
2332 static bool DAC960_V2_ReportDeviceConfiguration(DAC960_Controller_T
2333                                                    *Controller)
2334 {
2335   int PhysicalDeviceIndex, LogicalDriveNumber;
2336   DAC960_Info("  Physical Devices:\n", Controller);
2337   for (PhysicalDeviceIndex = 0;
2338        PhysicalDeviceIndex < DAC960_V2_MaxPhysicalDevices;
2339        PhysicalDeviceIndex++)
2340     {
2341       DAC960_V2_PhysicalDeviceInfo_T *PhysicalDeviceInfo =
2342         Controller->V2.PhysicalDeviceInformation[PhysicalDeviceIndex];
2343       DAC960_SCSI_Inquiry_T *InquiryStandardData =
2344         (DAC960_SCSI_Inquiry_T *) &PhysicalDeviceInfo->SCSI_InquiryData;
2345       DAC960_SCSI_Inquiry_UnitSerialNumber_T *InquiryUnitSerialNumber =
2346         Controller->V2.InquiryUnitSerialNumber[PhysicalDeviceIndex];
2347       char Vendor[1+sizeof(InquiryStandardData->VendorIdentification)];
2348       char Model[1+sizeof(InquiryStandardData->ProductIdentification)];
2349       char Revision[1+sizeof(InquiryStandardData->ProductRevisionLevel)];
2350       char SerialNumber[1+sizeof(InquiryUnitSerialNumber->ProductSerialNumber)];
2351       if (PhysicalDeviceInfo == NULL) break;
2352       DAC960_SanitizeInquiryData(InquiryStandardData, InquiryUnitSerialNumber,
2353                                  Vendor, Model, Revision, SerialNumber);
2354       DAC960_Info("    %d:%d%s Vendor: %s  Model: %s  Revision: %s\n",
2355                   Controller,
2356                   PhysicalDeviceInfo->Channel,
2357                   PhysicalDeviceInfo->TargetID,
2358                   (PhysicalDeviceInfo->TargetID < 10 ? " " : ""),
2359                   Vendor, Model, Revision);
2360       if (PhysicalDeviceInfo->NegotiatedSynchronousMegaTransfers == 0)
2361         DAC960_Info("         %sAsynchronous\n", Controller,
2362                     (PhysicalDeviceInfo->NegotiatedDataWidthBits == 16
2363                      ? "Wide " :""));
2364       else
2365         DAC960_Info("         %sSynchronous at %d MB/sec\n", Controller,
2366                     (PhysicalDeviceInfo->NegotiatedDataWidthBits == 16
2367                      ? "Wide " :""),
2368                     (PhysicalDeviceInfo->NegotiatedSynchronousMegaTransfers
2369                      * PhysicalDeviceInfo->NegotiatedDataWidthBits/8));
2370       if (InquiryUnitSerialNumber->PeripheralDeviceType != 0x1F)
2371         DAC960_Info("         Serial Number: %s\n", Controller, SerialNumber);
2372       if (PhysicalDeviceInfo->PhysicalDeviceState ==
2373           DAC960_V2_Device_Unconfigured)
2374         continue;
2375       DAC960_Info("         Disk Status: %s, %u blocks\n", Controller,
2376                   (PhysicalDeviceInfo->PhysicalDeviceState
2377                    == DAC960_V2_Device_Online
2378                    ? "Online"
2379                    : PhysicalDeviceInfo->PhysicalDeviceState
2380                      == DAC960_V2_Device_Rebuild
2381                      ? "Rebuild"
2382                      : PhysicalDeviceInfo->PhysicalDeviceState
2383                        == DAC960_V2_Device_Missing
2384                        ? "Missing"
2385                        : PhysicalDeviceInfo->PhysicalDeviceState
2386                          == DAC960_V2_Device_Critical
2387                          ? "Critical"
2388                          : PhysicalDeviceInfo->PhysicalDeviceState
2389                            == DAC960_V2_Device_Dead
2390                            ? "Dead"
2391                            : PhysicalDeviceInfo->PhysicalDeviceState
2392                              == DAC960_V2_Device_SuspectedDead
2393                              ? "Suspected-Dead"
2394                              : PhysicalDeviceInfo->PhysicalDeviceState
2395                                == DAC960_V2_Device_CommandedOffline
2396                                ? "Commanded-Offline"
2397                                : PhysicalDeviceInfo->PhysicalDeviceState
2398                                  == DAC960_V2_Device_Standby
2399                                  ? "Standby" : "Unknown"),
2400                   PhysicalDeviceInfo->ConfigurableDeviceSize);
2401       if (PhysicalDeviceInfo->ParityErrors == 0 &&
2402           PhysicalDeviceInfo->SoftErrors == 0 &&
2403           PhysicalDeviceInfo->HardErrors == 0 &&
2404           PhysicalDeviceInfo->MiscellaneousErrors == 0 &&
2405           PhysicalDeviceInfo->CommandTimeouts == 0 &&
2406           PhysicalDeviceInfo->Retries == 0 &&
2407           PhysicalDeviceInfo->Aborts == 0 &&
2408           PhysicalDeviceInfo->PredictedFailuresDetected == 0)
2409         continue;
2410       DAC960_Info("         Errors - Parity: %d, Soft: %d, "
2411                   "Hard: %d, Misc: %d\n", Controller,
2412                   PhysicalDeviceInfo->ParityErrors,
2413                   PhysicalDeviceInfo->SoftErrors,
2414                   PhysicalDeviceInfo->HardErrors,
2415                   PhysicalDeviceInfo->MiscellaneousErrors);
2416       DAC960_Info("                  Timeouts: %d, Retries: %d, "
2417                   "Aborts: %d, Predicted: %d\n", Controller,
2418                   PhysicalDeviceInfo->CommandTimeouts,
2419                   PhysicalDeviceInfo->Retries,
2420                   PhysicalDeviceInfo->Aborts,
2421                   PhysicalDeviceInfo->PredictedFailuresDetected);
2422     }
2423   DAC960_Info("  Logical Drives:\n", Controller);
2424   for (LogicalDriveNumber = 0;
2425        LogicalDriveNumber < DAC960_MaxLogicalDrives;
2426        LogicalDriveNumber++)
2427     {
2428       DAC960_V2_LogicalDeviceInfo_T *LogicalDeviceInfo =
2429         Controller->V2.LogicalDeviceInformation[LogicalDriveNumber];
2430       unsigned char *ReadCacheStatus[] = { "Read Cache Disabled",
2431                                            "Read Cache Enabled",
2432                                            "Read Ahead Enabled",
2433                                            "Intelligent Read Ahead Enabled",
2434                                            "-", "-", "-", "-" };
2435       unsigned char *WriteCacheStatus[] = { "Write Cache Disabled",
2436                                             "Logical Device Read Only",
2437                                             "Write Cache Enabled",
2438                                             "Intelligent Write Cache Enabled",
2439                                             "-", "-", "-", "-" };
2440       unsigned char *GeometryTranslation;
2441       if (LogicalDeviceInfo == NULL) continue;
2442       switch (LogicalDeviceInfo->DriveGeometry)
2443         {
2444         case DAC960_V2_Geometry_128_32:
2445           GeometryTranslation = "128/32";
2446           break;
2447         case DAC960_V2_Geometry_255_63:
2448           GeometryTranslation = "255/63";
2449           break;
2450         default:
2451           GeometryTranslation = "Invalid";
2452           DAC960_Error("Illegal Logical Device Geometry %d\n",
2453                        Controller, LogicalDeviceInfo->DriveGeometry);
2454           break;
2455         }
2456       DAC960_Info("    /dev/rd/c%dd%d: RAID-%d, %s, %u blocks\n",
2457                   Controller, Controller->ControllerNumber, LogicalDriveNumber,
2458                   LogicalDeviceInfo->RAIDLevel,
2459                   (LogicalDeviceInfo->LogicalDeviceState
2460                    == DAC960_V2_LogicalDevice_Online
2461                    ? "Online"
2462                    : LogicalDeviceInfo->LogicalDeviceState
2463                      == DAC960_V2_LogicalDevice_Critical
2464                      ? "Critical" : "Offline"),
2465                   LogicalDeviceInfo->ConfigurableDeviceSize);
2466       DAC960_Info("                  Logical Device %s, BIOS Geometry: %s\n",
2467                   Controller,
2468                   (LogicalDeviceInfo->LogicalDeviceControl
2469                                      .LogicalDeviceInitialized
2470                    ? "Initialized" : "Uninitialized"),
2471                   GeometryTranslation);
2472       if (LogicalDeviceInfo->StripeSize == 0)
2473         {
2474           if (LogicalDeviceInfo->CacheLineSize == 0)
2475             DAC960_Info("                  Stripe Size: N/A, "
2476                         "Segment Size: N/A\n", Controller);
2477           else
2478             DAC960_Info("                  Stripe Size: N/A, "
2479                         "Segment Size: %dKB\n", Controller,
2480                         1 << (LogicalDeviceInfo->CacheLineSize - 2));
2481         }
2482       else
2483         {
2484           if (LogicalDeviceInfo->CacheLineSize == 0)
2485             DAC960_Info("                  Stripe Size: %dKB, "
2486                         "Segment Size: N/A\n", Controller,
2487                         1 << (LogicalDeviceInfo->StripeSize - 2));
2488           else
2489             DAC960_Info("                  Stripe Size: %dKB, "
2490                         "Segment Size: %dKB\n", Controller,
2491                         1 << (LogicalDeviceInfo->StripeSize - 2),
2492                         1 << (LogicalDeviceInfo->CacheLineSize - 2));
2493         }
2494       DAC960_Info("                  %s, %s\n", Controller,
2495                   ReadCacheStatus[
2496                     LogicalDeviceInfo->LogicalDeviceControl.ReadCache],
2497                   WriteCacheStatus[
2498                     LogicalDeviceInfo->LogicalDeviceControl.WriteCache]);
2499       if (LogicalDeviceInfo->SoftErrors > 0 ||
2500           LogicalDeviceInfo->CommandsFailed > 0 ||
2501           LogicalDeviceInfo->DeferredWriteErrors)
2502         DAC960_Info("                  Errors - Soft: %d, Failed: %d, "
2503                     "Deferred Write: %d\n", Controller,
2504                     LogicalDeviceInfo->SoftErrors,
2505                     LogicalDeviceInfo->CommandsFailed,
2506                     LogicalDeviceInfo->DeferredWriteErrors);
2507
2508     }
2509   return true;
2510 }
2511
2512 /*
2513   DAC960_RegisterBlockDevice registers the Block Device structures
2514   associated with Controller.
2515 */
2516
2517 static bool DAC960_RegisterBlockDevice(DAC960_Controller_T *Controller)
2518 {
2519   int MajorNumber = DAC960_MAJOR + Controller->ControllerNumber;
2520   int n;
2521
2522   /*
2523     Register the Block Device Major Number for this DAC960 Controller.
2524   */
2525   if (register_blkdev(MajorNumber, "dac960") < 0)
2526       return false;
2527
2528   for (n = 0; n < DAC960_MaxLogicalDrives; n++) {
2529         struct gendisk *disk = Controller->disks[n];
2530         struct request_queue *RequestQueue;
2531
2532         /* for now, let all request queues share controller's lock */
2533         RequestQueue = blk_init_queue(DAC960_RequestFunction,&Controller->queue_lock);
2534         if (!RequestQueue) {
2535                 printk("DAC960: failure to allocate request queue\n");
2536                 continue;
2537         }
2538         Controller->RequestQueue[n] = RequestQueue;
2539         blk_queue_bounce_limit(RequestQueue, Controller->BounceBufferLimit);
2540         RequestQueue->queuedata = Controller;
2541         blk_queue_max_segments(RequestQueue, Controller->DriverScatterGatherLimit);
2542         blk_queue_max_hw_sectors(RequestQueue, Controller->MaxBlocksPerCommand);
2543         disk->queue = RequestQueue;
2544         sprintf(disk->disk_name, "rd/c%dd%d", Controller->ControllerNumber, n);
2545         disk->major = MajorNumber;
2546         disk->first_minor = n << DAC960_MaxPartitionsBits;
2547         disk->fops = &DAC960_BlockDeviceOperations;
2548    }
2549   /*
2550     Indicate the Block Device Registration completed successfully,
2551   */
2552   return true;
2553 }
2554
2555
2556 /*
2557   DAC960_UnregisterBlockDevice unregisters the Block Device structures
2558   associated with Controller.
2559 */
2560
2561 static void DAC960_UnregisterBlockDevice(DAC960_Controller_T *Controller)
2562 {
2563   int MajorNumber = DAC960_MAJOR + Controller->ControllerNumber;
2564   int disk;
2565
2566   /* does order matter when deleting gendisk and cleanup in request queue? */
2567   for (disk = 0; disk < DAC960_MaxLogicalDrives; disk++) {
2568         del_gendisk(Controller->disks[disk]);
2569         blk_cleanup_queue(Controller->RequestQueue[disk]);
2570         Controller->RequestQueue[disk] = NULL;
2571   }
2572
2573   /*
2574     Unregister the Block Device Major Number for this DAC960 Controller.
2575   */
2576   unregister_blkdev(MajorNumber, "dac960");
2577 }
2578
2579 /*
2580   DAC960_ComputeGenericDiskInfo computes the values for the Generic Disk
2581   Information Partition Sector Counts and Block Sizes.
2582 */
2583
2584 static void DAC960_ComputeGenericDiskInfo(DAC960_Controller_T *Controller)
2585 {
2586         int disk;
2587         for (disk = 0; disk < DAC960_MaxLogicalDrives; disk++)
2588                 set_capacity(Controller->disks[disk], disk_size(Controller, disk));
2589 }
2590
2591 /*
2592   DAC960_ReportErrorStatus reports Controller BIOS Messages passed through
2593   the Error Status Register when the driver performs the BIOS handshaking.
2594   It returns true for fatal errors and false otherwise.
2595 */
2596
2597 static bool DAC960_ReportErrorStatus(DAC960_Controller_T *Controller,
2598                                         unsigned char ErrorStatus,
2599                                         unsigned char Parameter0,
2600                                         unsigned char Parameter1)
2601 {
2602   switch (ErrorStatus)
2603     {
2604     case 0x00:
2605       DAC960_Notice("Physical Device %d:%d Not Responding\n",
2606                     Controller, Parameter1, Parameter0);
2607       break;
2608     case 0x08:
2609       if (Controller->DriveSpinUpMessageDisplayed) break;
2610       DAC960_Notice("Spinning Up Drives\n", Controller);
2611       Controller->DriveSpinUpMessageDisplayed = true;
2612       break;
2613     case 0x30:
2614       DAC960_Notice("Configuration Checksum Error\n", Controller);
2615       break;
2616     case 0x60:
2617       DAC960_Notice("Mirror Race Recovery Failed\n", Controller);
2618       break;
2619     case 0x70:
2620       DAC960_Notice("Mirror Race Recovery In Progress\n", Controller);
2621       break;
2622     case 0x90:
2623       DAC960_Notice("Physical Device %d:%d COD Mismatch\n",
2624                     Controller, Parameter1, Parameter0);
2625       break;
2626     case 0xA0:
2627       DAC960_Notice("Logical Drive Installation Aborted\n", Controller);
2628       break;
2629     case 0xB0:
2630       DAC960_Notice("Mirror Race On A Critical Logical Drive\n", Controller);
2631       break;
2632     case 0xD0:
2633       DAC960_Notice("New Controller Configuration Found\n", Controller);
2634       break;
2635     case 0xF0:
2636       DAC960_Error("Fatal Memory Parity Error for Controller at\n", Controller);
2637       return true;
2638     default:
2639       DAC960_Error("Unknown Initialization Error %02X for Controller at\n",
2640                    Controller, ErrorStatus);
2641       return true;
2642     }
2643   return false;
2644 }
2645
2646
2647 /*
2648  * DAC960_DetectCleanup releases the resources that were allocated
2649  * during DAC960_DetectController().  DAC960_DetectController can
2650  * has several internal failure points, so not ALL resources may
2651  * have been allocated.  It's important to free only
2652  * resources that HAVE been allocated.  The code below always
2653  * tests that the resource has been allocated before attempting to
2654  * free it.
2655  */
2656 static void DAC960_DetectCleanup(DAC960_Controller_T *Controller)
2657 {
2658   int i;
2659
2660   /* Free the memory mailbox, status, and related structures */
2661   free_dma_loaf(Controller->PCIDevice, &Controller->DmaPages);
2662   if (Controller->MemoryMappedAddress) {
2663         switch(Controller->HardwareType)
2664         {
2665                 case DAC960_GEM_Controller:
2666                         DAC960_GEM_DisableInterrupts(Controller->BaseAddress);
2667                         break;
2668                 case DAC960_BA_Controller:
2669                         DAC960_BA_DisableInterrupts(Controller->BaseAddress);
2670                         break;
2671                 case DAC960_LP_Controller:
2672                         DAC960_LP_DisableInterrupts(Controller->BaseAddress);
2673                         break;
2674                 case DAC960_LA_Controller:
2675                         DAC960_LA_DisableInterrupts(Controller->BaseAddress);
2676                         break;
2677                 case DAC960_PG_Controller:
2678                         DAC960_PG_DisableInterrupts(Controller->BaseAddress);
2679                         break;
2680                 case DAC960_PD_Controller:
2681                         DAC960_PD_DisableInterrupts(Controller->BaseAddress);
2682                         break;
2683                 case DAC960_P_Controller:
2684                         DAC960_PD_DisableInterrupts(Controller->BaseAddress);
2685                         break;
2686         }
2687         iounmap(Controller->MemoryMappedAddress);
2688   }
2689   if (Controller->IRQ_Channel)
2690         free_irq(Controller->IRQ_Channel, Controller);
2691   if (Controller->IO_Address)
2692         release_region(Controller->IO_Address, 0x80);
2693   pci_disable_device(Controller->PCIDevice);
2694   for (i = 0; (i < DAC960_MaxLogicalDrives) && Controller->disks[i]; i++)
2695        put_disk(Controller->disks[i]);
2696   DAC960_Controllers[Controller->ControllerNumber] = NULL;
2697   kfree(Controller);
2698 }
2699
2700
2701 /*
2702   DAC960_DetectController detects Mylex DAC960/AcceleRAID/eXtremeRAID
2703   PCI RAID Controllers by interrogating the PCI Configuration Space for
2704   Controller Type.
2705 */
2706
2707 static DAC960_Controller_T *
2708 DAC960_DetectController(struct pci_dev *PCI_Device,
2709                         const struct pci_device_id *entry)
2710 {
2711   struct DAC960_privdata *privdata =
2712                 (struct DAC960_privdata *)entry->driver_data;
2713   irq_handler_t InterruptHandler = privdata->InterruptHandler;
2714   unsigned int MemoryWindowSize = privdata->MemoryWindowSize;
2715   DAC960_Controller_T *Controller = NULL;
2716   unsigned char DeviceFunction = PCI_Device->devfn;
2717   unsigned char ErrorStatus, Parameter0, Parameter1;
2718   unsigned int IRQ_Channel;
2719   void __iomem *BaseAddress;
2720   int i;
2721
2722   Controller = kzalloc(sizeof(DAC960_Controller_T), GFP_ATOMIC);
2723   if (Controller == NULL) {
2724         DAC960_Error("Unable to allocate Controller structure for "
2725                        "Controller at\n", NULL);
2726         return NULL;
2727   }
2728   Controller->ControllerNumber = DAC960_ControllerCount;
2729   DAC960_Controllers[DAC960_ControllerCount++] = Controller;
2730   Controller->Bus = PCI_Device->bus->number;
2731   Controller->FirmwareType = privdata->FirmwareType;
2732   Controller->HardwareType = privdata->HardwareType;
2733   Controller->Device = DeviceFunction >> 3;
2734   Controller->Function = DeviceFunction & 0x7;
2735   Controller->PCIDevice = PCI_Device;
2736   strcpy(Controller->FullModelName, "DAC960");
2737
2738   if (pci_enable_device(PCI_Device))
2739         goto Failure;
2740
2741   switch (Controller->HardwareType)
2742   {
2743         case DAC960_GEM_Controller:
2744           Controller->PCI_Address = pci_resource_start(PCI_Device, 0);
2745           break;
2746         case DAC960_BA_Controller:
2747           Controller->PCI_Address = pci_resource_start(PCI_Device, 0);
2748           break;
2749         case DAC960_LP_Controller:
2750           Controller->PCI_Address = pci_resource_start(PCI_Device, 0);
2751           break;
2752         case DAC960_LA_Controller:
2753           Controller->PCI_Address = pci_resource_start(PCI_Device, 0);
2754           break;
2755         case DAC960_PG_Controller:
2756           Controller->PCI_Address = pci_resource_start(PCI_Device, 0);
2757           break;
2758         case DAC960_PD_Controller:
2759           Controller->IO_Address = pci_resource_start(PCI_Device, 0);
2760           Controller->PCI_Address = pci_resource_start(PCI_Device, 1);
2761           break;
2762         case DAC960_P_Controller:
2763           Controller->IO_Address = pci_resource_start(PCI_Device, 0);
2764           Controller->PCI_Address = pci_resource_start(PCI_Device, 1);
2765           break;
2766   }
2767
2768   pci_set_drvdata(PCI_Device, (void *)((long)Controller->ControllerNumber));
2769   for (i = 0; i < DAC960_MaxLogicalDrives; i++) {
2770         Controller->disks[i] = alloc_disk(1<<DAC960_MaxPartitionsBits);
2771         if (!Controller->disks[i])
2772                 goto Failure;
2773         Controller->disks[i]->private_data = (void *)((long)i);
2774   }
2775   init_waitqueue_head(&Controller->CommandWaitQueue);
2776   init_waitqueue_head(&Controller->HealthStatusWaitQueue);
2777   spin_lock_init(&Controller->queue_lock);
2778   DAC960_AnnounceDriver(Controller);
2779   /*
2780     Map the Controller Register Window.
2781   */
2782  if (MemoryWindowSize < PAGE_SIZE)
2783         MemoryWindowSize = PAGE_SIZE;
2784   Controller->MemoryMappedAddress =
2785         ioremap_nocache(Controller->PCI_Address & PAGE_MASK, MemoryWindowSize);
2786   Controller->BaseAddress =
2787         Controller->MemoryMappedAddress + (Controller->PCI_Address & ~PAGE_MASK);
2788   if (Controller->MemoryMappedAddress == NULL)
2789   {
2790           DAC960_Error("Unable to map Controller Register Window for "
2791                        "Controller at\n", Controller);
2792           goto Failure;
2793   }
2794   BaseAddress = Controller->BaseAddress;
2795   switch (Controller->HardwareType)
2796   {
2797         case DAC960_GEM_Controller:
2798           DAC960_GEM_DisableInterrupts(BaseAddress);
2799           DAC960_GEM_AcknowledgeHardwareMailboxStatus(BaseAddress);
2800           udelay(1000);
2801           while (DAC960_GEM_InitializationInProgressP(BaseAddress))
2802             {
2803               if (DAC960_GEM_ReadErrorStatus(BaseAddress, &ErrorStatus,
2804                                             &Parameter0, &Parameter1) &&
2805                   DAC960_ReportErrorStatus(Controller, ErrorStatus,
2806                                            Parameter0, Parameter1))
2807                 goto Failure;
2808               udelay(10);
2809             }
2810           if (!DAC960_V2_EnableMemoryMailboxInterface(Controller))
2811             {
2812               DAC960_Error("Unable to Enable Memory Mailbox Interface "
2813                            "for Controller at\n", Controller);
2814               goto Failure;
2815             }
2816           DAC960_GEM_EnableInterrupts(BaseAddress);
2817           Controller->QueueCommand = DAC960_GEM_QueueCommand;
2818           Controller->ReadControllerConfiguration =
2819             DAC960_V2_ReadControllerConfiguration;
2820           Controller->ReadDeviceConfiguration =
2821             DAC960_V2_ReadDeviceConfiguration;
2822           Controller->ReportDeviceConfiguration =
2823             DAC960_V2_ReportDeviceConfiguration;
2824           Controller->QueueReadWriteCommand =
2825             DAC960_V2_QueueReadWriteCommand;
2826           break;
2827         case DAC960_BA_Controller:
2828           DAC960_BA_DisableInterrupts(BaseAddress);
2829           DAC960_BA_AcknowledgeHardwareMailboxStatus(BaseAddress);
2830           udelay(1000);
2831           while (DAC960_BA_InitializationInProgressP(BaseAddress))
2832             {
2833               if (DAC960_BA_ReadErrorStatus(BaseAddress, &ErrorStatus,
2834                                             &Parameter0, &Parameter1) &&
2835                   DAC960_ReportErrorStatus(Controller, ErrorStatus,
2836                                            Parameter0, Parameter1))
2837                 goto Failure;
2838               udelay(10);
2839             }
2840           if (!DAC960_V2_EnableMemoryMailboxInterface(Controller))
2841             {
2842               DAC960_Error("Unable to Enable Memory Mailbox Interface "
2843                            "for Controller at\n", Controller);
2844               goto Failure;
2845             }
2846           DAC960_BA_EnableInterrupts(BaseAddress);
2847           Controller->QueueCommand = DAC960_BA_QueueCommand;
2848           Controller->ReadControllerConfiguration =
2849             DAC960_V2_ReadControllerConfiguration;
2850           Controller->ReadDeviceConfiguration =
2851             DAC960_V2_ReadDeviceConfiguration;
2852           Controller->ReportDeviceConfiguration =
2853             DAC960_V2_ReportDeviceConfiguration;
2854           Controller->QueueReadWriteCommand =
2855             DAC960_V2_QueueReadWriteCommand;
2856           break;
2857         case DAC960_LP_Controller:
2858           DAC960_LP_DisableInterrupts(BaseAddress);
2859           DAC960_LP_AcknowledgeHardwareMailboxStatus(BaseAddress);
2860           udelay(1000);
2861           while (DAC960_LP_InitializationInProgressP(BaseAddress))
2862             {
2863               if (DAC960_LP_ReadErrorStatus(BaseAddress, &ErrorStatus,
2864                                             &Parameter0, &Parameter1) &&
2865                   DAC960_ReportErrorStatus(Controller, ErrorStatus,
2866                                            Parameter0, Parameter1))
2867                 goto Failure;
2868               udelay(10);
2869             }
2870           if (!DAC960_V2_EnableMemoryMailboxInterface(Controller))
2871             {
2872               DAC960_Error("Unable to Enable Memory Mailbox Interface "
2873                            "for Controller at\n", Controller);
2874               goto Failure;
2875             }
2876           DAC960_LP_EnableInterrupts(BaseAddress);
2877           Controller->QueueCommand = DAC960_LP_QueueCommand;
2878           Controller->ReadControllerConfiguration =
2879             DAC960_V2_ReadControllerConfiguration;
2880           Controller->ReadDeviceConfiguration =
2881             DAC960_V2_ReadDeviceConfiguration;
2882           Controller->ReportDeviceConfiguration =
2883             DAC960_V2_ReportDeviceConfiguration;
2884           Controller->QueueReadWriteCommand =
2885             DAC960_V2_QueueReadWriteCommand;
2886           break;
2887         case DAC960_LA_Controller:
2888           DAC960_LA_DisableInterrupts(BaseAddress);
2889           DAC960_LA_AcknowledgeHardwareMailboxStatus(BaseAddress);
2890           udelay(1000);
2891           while (DAC960_LA_InitializationInProgressP(BaseAddress))
2892             {
2893               if (DAC960_LA_ReadErrorStatus(BaseAddress, &ErrorStatus,
2894                                             &Parameter0, &Parameter1) &&
2895                   DAC960_ReportErrorStatus(Controller, ErrorStatus,
2896                                            Parameter0, Parameter1))
2897                 goto Failure;
2898               udelay(10);
2899             }
2900           if (!DAC960_V1_EnableMemoryMailboxInterface(Controller))
2901             {
2902               DAC960_Error("Unable to Enable Memory Mailbox Interface "
2903                            "for Controller at\n", Controller);
2904               goto Failure;
2905             }
2906           DAC960_LA_EnableInterrupts(BaseAddress);
2907           if (Controller->V1.DualModeMemoryMailboxInterface)
2908             Controller->QueueCommand = DAC960_LA_QueueCommandDualMode;
2909           else Controller->QueueCommand = DAC960_LA_QueueCommandSingleMode;
2910           Controller->ReadControllerConfiguration =
2911             DAC960_V1_ReadControllerConfiguration;
2912           Controller->ReadDeviceConfiguration =
2913             DAC960_V1_ReadDeviceConfiguration;
2914           Controller->ReportDeviceConfiguration =
2915             DAC960_V1_ReportDeviceConfiguration;
2916           Controller->QueueReadWriteCommand =
2917             DAC960_V1_QueueReadWriteCommand;
2918           break;
2919         case DAC960_PG_Controller:
2920           DAC960_PG_DisableInterrupts(BaseAddress);
2921           DAC960_PG_AcknowledgeHardwareMailboxStatus(BaseAddress);
2922           udelay(1000);
2923           while (DAC960_PG_InitializationInProgressP(BaseAddress))
2924             {
2925               if (DAC960_PG_ReadErrorStatus(BaseAddress, &ErrorStatus,
2926                                             &Parameter0, &Parameter1) &&
2927                   DAC960_ReportErrorStatus(Controller, ErrorStatus,
2928                                            Parameter0, Parameter1))
2929                 goto Failure;
2930               udelay(10);
2931             }
2932           if (!DAC960_V1_EnableMemoryMailboxInterface(Controller))
2933             {
2934               DAC960_Error("Unable to Enable Memory Mailbox Interface "
2935                            "for Controller at\n", Controller);
2936               goto Failure;
2937             }
2938           DAC960_PG_EnableInterrupts(BaseAddress);
2939           if (Controller->V1.DualModeMemoryMailboxInterface)
2940             Controller->QueueCommand = DAC960_PG_QueueCommandDualMode;
2941           else Controller->QueueCommand = DAC960_PG_QueueCommandSingleMode;
2942           Controller->ReadControllerConfiguration =
2943             DAC960_V1_ReadControllerConfiguration;
2944           Controller->ReadDeviceConfiguration =
2945             DAC960_V1_ReadDeviceConfiguration;
2946           Controller->ReportDeviceConfiguration =
2947             DAC960_V1_ReportDeviceConfiguration;
2948           Controller->QueueReadWriteCommand =
2949             DAC960_V1_QueueReadWriteCommand;
2950           break;
2951         case DAC960_PD_Controller:
2952           if (!request_region(Controller->IO_Address, 0x80,
2953                               Controller->FullModelName)) {
2954                 DAC960_Error("IO port 0x%d busy for Controller at\n",
2955                              Controller, Controller->IO_Address);
2956                 goto Failure;
2957           }
2958           DAC960_PD_DisableInterrupts(BaseAddress);
2959           DAC960_PD_AcknowledgeStatus(BaseAddress);
2960           udelay(1000);
2961           while (DAC960_PD_InitializationInProgressP(BaseAddress))
2962             {
2963               if (DAC960_PD_ReadErrorStatus(BaseAddress, &ErrorStatus,
2964                                             &Parameter0, &Parameter1) &&
2965                   DAC960_ReportErrorStatus(Controller, ErrorStatus,
2966                                            Parameter0, Parameter1))
2967                 goto Failure;
2968               udelay(10);
2969             }
2970           if (!DAC960_V1_EnableMemoryMailboxInterface(Controller))
2971             {
2972               DAC960_Error("Unable to allocate DMA mapped memory "
2973                            "for Controller at\n", Controller);
2974               goto Failure;
2975             }
2976           DAC960_PD_EnableInterrupts(BaseAddress);
2977           Controller->QueueCommand = DAC960_PD_QueueCommand;
2978           Controller->ReadControllerConfiguration =
2979             DAC960_V1_ReadControllerConfiguration;
2980           Controller->ReadDeviceConfiguration =
2981             DAC960_V1_ReadDeviceConfiguration;
2982           Controller->ReportDeviceConfiguration =
2983             DAC960_V1_ReportDeviceConfiguration;
2984           Controller->QueueReadWriteCommand =
2985             DAC960_V1_QueueReadWriteCommand;
2986           break;
2987         case DAC960_P_Controller:
2988           if (!request_region(Controller->IO_Address, 0x80,
2989                               Controller->FullModelName)){
2990                 DAC960_Error("IO port 0x%d busy for Controller at\n",
2991                              Controller, Controller->IO_Address);
2992                 goto Failure;
2993           }
2994           DAC960_PD_DisableInterrupts(BaseAddress);
2995           DAC960_PD_AcknowledgeStatus(BaseAddress);
2996           udelay(1000);
2997           while (DAC960_PD_InitializationInProgressP(BaseAddress))
2998             {
2999               if (DAC960_PD_ReadErrorStatus(BaseAddress, &ErrorStatus,
3000                                             &Parameter0, &Parameter1) &&
3001                   DAC960_ReportErrorStatus(Controller, ErrorStatus,
3002                                            Parameter0, Parameter1))
3003                 goto Failure;
3004               udelay(10);
3005             }
3006           if (!DAC960_V1_EnableMemoryMailboxInterface(Controller))
3007             {
3008               DAC960_Error("Unable to allocate DMA mapped memory"
3009                            "for Controller at\n", Controller);
3010               goto Failure;
3011             }
3012           DAC960_PD_EnableInterrupts(BaseAddress);
3013           Controller->QueueCommand = DAC960_P_QueueCommand;
3014           Controller->ReadControllerConfiguration =
3015             DAC960_V1_ReadControllerConfiguration;
3016           Controller->ReadDeviceConfiguration =
3017             DAC960_V1_ReadDeviceConfiguration;
3018           Controller->ReportDeviceConfiguration =
3019             DAC960_V1_ReportDeviceConfiguration;
3020           Controller->QueueReadWriteCommand =
3021             DAC960_V1_QueueReadWriteCommand;
3022           break;
3023   }
3024   /*
3025      Acquire shared access to the IRQ Channel.
3026   */
3027   IRQ_Channel = PCI_Device->irq;
3028   if (request_irq(IRQ_Channel, InterruptHandler, IRQF_SHARED,
3029                       Controller->FullModelName, Controller) < 0)
3030   {
3031         DAC960_Error("Unable to acquire IRQ Channel %d for Controller at\n",
3032                        Controller, Controller->IRQ_Channel);
3033         goto Failure;
3034   }
3035   Controller->IRQ_Channel = IRQ_Channel;
3036   Controller->InitialCommand.CommandIdentifier = 1;
3037   Controller->InitialCommand.Controller = Controller;
3038   Controller->Commands[0] = &Controller->InitialCommand;
3039   Controller->FreeCommands = &Controller->InitialCommand;
3040   return Controller;
3041
3042 Failure:
3043   if (Controller->IO_Address == 0)
3044         DAC960_Error("PCI Bus %d Device %d Function %d I/O Address N/A "
3045                      "PCI Address 0x%X\n", Controller,
3046                      Controller->Bus, Controller->Device,
3047                      Controller->Function, Controller->PCI_Address);
3048   else
3049         DAC960_Error("PCI Bus %d Device %d Function %d I/O Address "
3050                         "0x%X PCI Address 0x%X\n", Controller,
3051                         Controller->Bus, Controller->Device,
3052                         Controller->Function, Controller->IO_Address,
3053                         Controller->PCI_Address);
3054   DAC960_DetectCleanup(Controller);
3055   DAC960_ControllerCount--;
3056   return NULL;
3057 }
3058
3059 /*
3060   DAC960_InitializeController initializes Controller.
3061 */
3062
3063 static bool
3064 DAC960_InitializeController(DAC960_Controller_T *Controller)
3065 {
3066   if (DAC960_ReadControllerConfiguration(Controller) &&
3067       DAC960_ReportControllerConfiguration(Controller) &&
3068       DAC960_CreateAuxiliaryStructures(Controller) &&
3069       DAC960_ReadDeviceConfiguration(Controller) &&
3070       DAC960_ReportDeviceConfiguration(Controller) &&
3071       DAC960_RegisterBlockDevice(Controller))
3072     {
3073       /*
3074         Initialize the Monitoring Timer.
3075       */
3076       init_timer(&Controller->MonitoringTimer);
3077       Controller->MonitoringTimer.expires =
3078         jiffies + DAC960_MonitoringTimerInterval;
3079       Controller->MonitoringTimer.data = (unsigned long) Controller;
3080       Controller->MonitoringTimer.function = DAC960_MonitoringTimerFunction;
3081       add_timer(&Controller->MonitoringTimer);
3082       Controller->ControllerInitialized = true;
3083       return true;
3084     }
3085   return false;
3086 }
3087
3088
3089 /*
3090   DAC960_FinalizeController finalizes Controller.
3091 */
3092
3093 static void DAC960_FinalizeController(DAC960_Controller_T *Controller)
3094 {
3095   if (Controller->ControllerInitialized)
3096     {
3097       unsigned long flags;
3098
3099       /*
3100        * Acquiring and releasing lock here eliminates
3101        * a very low probability race.
3102        *
3103        * The code below allocates controller command structures
3104        * from the free list without holding the controller lock.
3105        * This is safe assuming there is no other activity on
3106        * the controller at the time.
3107        *
3108        * But, there might be a monitoring command still
3109        * in progress.  Setting the Shutdown flag while holding
3110        * the lock ensures that there is no monitoring command
3111        * in the interrupt handler currently, and any monitoring
3112        * commands that complete from this time on will NOT return
3113        * their command structure to the free list.
3114        */
3115
3116       spin_lock_irqsave(&Controller->queue_lock, flags);
3117       Controller->ShutdownMonitoringTimer = 1;
3118       spin_unlock_irqrestore(&Controller->queue_lock, flags);
3119
3120       del_timer_sync(&Controller->MonitoringTimer);
3121       if (Controller->FirmwareType == DAC960_V1_Controller)
3122         {
3123           DAC960_Notice("Flushing Cache...", Controller);
3124           DAC960_V1_ExecuteType3(Controller, DAC960_V1_Flush, 0);
3125           DAC960_Notice("done\n", Controller);
3126
3127           if (Controller->HardwareType == DAC960_PD_Controller)
3128               release_region(Controller->IO_Address, 0x80);
3129         }
3130       else
3131         {
3132           DAC960_Notice("Flushing Cache...", Controller);
3133           DAC960_V2_DeviceOperation(Controller, DAC960_V2_PauseDevice,
3134                                     DAC960_V2_RAID_Controller);
3135           DAC960_Notice("done\n", Controller);
3136         }
3137     }
3138   DAC960_UnregisterBlockDevice(Controller);
3139   DAC960_DestroyAuxiliaryStructures(Controller);
3140   DAC960_DestroyProcEntries(Controller);
3141   DAC960_DetectCleanup(Controller);
3142 }
3143
3144
3145 /*
3146   DAC960_Probe verifies controller's existence and
3147   initializes the DAC960 Driver for that controller.
3148 */
3149
3150 static int
3151 DAC960_Probe(struct pci_dev *dev, const struct pci_device_id *entry)
3152 {
3153   int disk;
3154   DAC960_Controller_T *Controller;
3155
3156   if (DAC960_ControllerCount == DAC960_MaxControllers)
3157   {
3158         DAC960_Error("More than %d DAC960 Controllers detected - "
3159                        "ignoring from Controller at\n",
3160                        NULL, DAC960_MaxControllers);
3161         return -ENODEV;
3162   }
3163
3164   Controller = DAC960_DetectController(dev, entry);
3165   if (!Controller)
3166         return -ENODEV;
3167
3168   if (!DAC960_InitializeController(Controller)) {
3169         DAC960_FinalizeController(Controller);
3170         return -ENODEV;
3171   }
3172
3173   for (disk = 0; disk < DAC960_MaxLogicalDrives; disk++) {
3174         set_capacity(Controller->disks[disk], disk_size(Controller, disk));
3175         add_disk(Controller->disks[disk]);
3176   }
3177   DAC960_CreateProcEntries(Controller);
3178   return 0;
3179 }
3180
3181
3182 /*
3183   DAC960_Finalize finalizes the DAC960 Driver.
3184 */
3185
3186 static void DAC960_Remove(struct pci_dev *PCI_Device)
3187 {
3188   int Controller_Number = (long)pci_get_drvdata(PCI_Device);
3189   DAC960_Controller_T *Controller = DAC960_Controllers[Controller_Number];
3190   if (Controller != NULL)
3191       DAC960_FinalizeController(Controller);
3192 }
3193
3194
3195 /*
3196   DAC960_V1_QueueReadWriteCommand prepares and queues a Read/Write Command for
3197   DAC960 V1 Firmware Controllers.
3198 */
3199
3200 static void DAC960_V1_QueueReadWriteCommand(DAC960_Command_T *Command)
3201 {
3202   DAC960_Controller_T *Controller = Command->Controller;
3203   DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
3204   DAC960_V1_ScatterGatherSegment_T *ScatterGatherList =
3205                                         Command->V1.ScatterGatherList;
3206   struct scatterlist *ScatterList = Command->V1.ScatterList;
3207
3208   DAC960_V1_ClearCommand(Command);
3209
3210   if (Command->SegmentCount == 1)
3211     {
3212       if (Command->DmaDirection == PCI_DMA_FROMDEVICE)
3213         CommandMailbox->Type5.CommandOpcode = DAC960_V1_Read;
3214       else
3215         CommandMailbox->Type5.CommandOpcode = DAC960_V1_Write;
3216
3217       CommandMailbox->Type5.LD.TransferLength = Command->BlockCount;
3218       CommandMailbox->Type5.LD.LogicalDriveNumber = Command->LogicalDriveNumber;
3219       CommandMailbox->Type5.LogicalBlockAddress = Command->BlockNumber;
3220       CommandMailbox->Type5.BusAddress =
3221                         (DAC960_BusAddress32_T)sg_dma_address(ScatterList);
3222     }
3223   else
3224     {
3225       int i;
3226
3227       if (Command->DmaDirection == PCI_DMA_FROMDEVICE)
3228         CommandMailbox->Type5.CommandOpcode = DAC960_V1_ReadWithScatterGather;
3229       else
3230         CommandMailbox->Type5.CommandOpcode = DAC960_V1_WriteWithScatterGather;
3231
3232       CommandMailbox->Type5.LD.TransferLength = Command->BlockCount;
3233       CommandMailbox->Type5.LD.LogicalDriveNumber = Command->LogicalDriveNumber;
3234       CommandMailbox->Type5.LogicalBlockAddress = Command->BlockNumber;
3235       CommandMailbox->Type5.BusAddress = Command->V1.ScatterGatherListDMA;
3236
3237       CommandMailbox->Type5.ScatterGatherCount = Command->SegmentCount;
3238
3239       for (i = 0; i < Command->SegmentCount; i++, ScatterList++, ScatterGatherList++) {
3240                 ScatterGatherList->SegmentDataPointer =
3241                         (DAC960_BusAddress32_T)sg_dma_address(ScatterList);
3242                 ScatterGatherList->SegmentByteCount =
3243                         (DAC960_ByteCount32_T)sg_dma_len(ScatterList);
3244       }
3245     }
3246   DAC960_QueueCommand(Command);
3247 }
3248
3249
3250 /*
3251   DAC960_V2_QueueReadWriteCommand prepares and queues a Read/Write Command for
3252   DAC960 V2 Firmware Controllers.
3253 */
3254
3255 static void DAC960_V2_QueueReadWriteCommand(DAC960_Command_T *Command)
3256 {
3257   DAC960_Controller_T *Controller = Command->Controller;
3258   DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox;
3259   struct scatterlist *ScatterList = Command->V2.ScatterList;
3260
3261   DAC960_V2_ClearCommand(Command);
3262
3263   CommandMailbox->SCSI_10.CommandOpcode = DAC960_V2_SCSI_10;
3264   CommandMailbox->SCSI_10.CommandControlBits.DataTransferControllerToHost =
3265     (Command->DmaDirection == PCI_DMA_FROMDEVICE);
3266   CommandMailbox->SCSI_10.DataTransferSize =
3267     Command->BlockCount << DAC960_BlockSizeBits;
3268   CommandMailbox->SCSI_10.RequestSenseBusAddress = Command->V2.RequestSenseDMA;
3269   CommandMailbox->SCSI_10.PhysicalDevice =
3270     Controller->V2.LogicalDriveToVirtualDevice[Command->LogicalDriveNumber];
3271   CommandMailbox->SCSI_10.RequestSenseSize = sizeof(DAC960_SCSI_RequestSense_T);
3272   CommandMailbox->SCSI_10.CDBLength = 10;
3273   CommandMailbox->SCSI_10.SCSI_CDB[0] =
3274     (Command->DmaDirection == PCI_DMA_FROMDEVICE ? 0x28 : 0x2A);
3275   CommandMailbox->SCSI_10.SCSI_CDB[2] = Command->BlockNumber >> 24;
3276   CommandMailbox->SCSI_10.SCSI_CDB[3] = Command->BlockNumber >> 16;
3277   CommandMailbox->SCSI_10.SCSI_CDB[4] = Command->BlockNumber >> 8;
3278   CommandMailbox->SCSI_10.SCSI_CDB[5] = Command->BlockNumber;
3279   CommandMailbox->SCSI_10.SCSI_CDB[7] = Command->BlockCount >> 8;
3280   CommandMailbox->SCSI_10.SCSI_CDB[8] = Command->BlockCount;
3281
3282   if (Command->SegmentCount == 1)
3283     {
3284       CommandMailbox->SCSI_10.DataTransferMemoryAddress
3285                              .ScatterGatherSegments[0]
3286                              .SegmentDataPointer =
3287         (DAC960_BusAddress64_T)sg_dma_address(ScatterList);
3288       CommandMailbox->SCSI_10.DataTransferMemoryAddress
3289                              .ScatterGatherSegments[0]
3290                              .SegmentByteCount =
3291         CommandMailbox->SCSI_10.DataTransferSize;
3292     }
3293   else
3294     {
3295       DAC960_V2_ScatterGatherSegment_T *ScatterGatherList;
3296       int i;
3297
3298       if (Command->SegmentCount > 2)
3299         {
3300           ScatterGatherList = Command->V2.ScatterGatherList;
3301           CommandMailbox->SCSI_10.CommandControlBits
3302                          .AdditionalScatterGatherListMemory = true;
3303           CommandMailbox->SCSI_10.DataTransferMemoryAddress
3304                 .ExtendedScatterGather.ScatterGatherList0Length = Command->SegmentCount;
3305           CommandMailbox->SCSI_10.DataTransferMemoryAddress
3306                          .ExtendedScatterGather.ScatterGatherList0Address =
3307             Command->V2.ScatterGatherListDMA;
3308         }
3309       else
3310         ScatterGatherList = CommandMailbox->SCSI_10.DataTransferMemoryAddress
3311                                  .ScatterGatherSegments;
3312
3313       for (i = 0; i < Command->SegmentCount; i++, ScatterList++, ScatterGatherList++) {
3314                 ScatterGatherList->SegmentDataPointer =
3315                         (DAC960_BusAddress64_T)sg_dma_address(ScatterList);
3316                 ScatterGatherList->SegmentByteCount =
3317                         (DAC960_ByteCount64_T)sg_dma_len(ScatterList);
3318       }
3319     }
3320   DAC960_QueueCommand(Command);
3321 }
3322
3323
3324 static int DAC960_process_queue(DAC960_Controller_T *Controller, struct request_queue *req_q)
3325 {
3326         struct request *Request;
3327         DAC960_Command_T *Command;
3328
3329    while(1) {
3330         Request = blk_peek_request(req_q);
3331         if (!Request)
3332                 return 1;
3333
3334         Command = DAC960_AllocateCommand(Controller);
3335         if (Command == NULL)
3336                 return 0;
3337
3338         if (rq_data_dir(Request) == READ) {
3339                 Command->DmaDirection = PCI_DMA_FROMDEVICE;
3340                 Command->CommandType = DAC960_ReadCommand;
3341         } else {
3342                 Command->DmaDirection = PCI_DMA_TODEVICE;
3343                 Command->CommandType = DAC960_WriteCommand;
3344         }
3345         Command->Completion = Request->end_io_data;
3346         Command->LogicalDriveNumber = (long)Request->rq_disk->private_data;
3347         Command->BlockNumber = blk_rq_pos(Request);
3348         Command->BlockCount = blk_rq_sectors(Request);
3349         Command->Request = Request;
3350         blk_start_request(Request);
3351         Command->SegmentCount = blk_rq_map_sg(req_q,
3352                   Command->Request, Command->cmd_sglist);
3353         /* pci_map_sg MAY change the value of SegCount */
3354         Command->SegmentCount = pci_map_sg(Controller->PCIDevice, Command->cmd_sglist,
3355                  Command->SegmentCount, Command->DmaDirection);
3356
3357         DAC960_QueueReadWriteCommand(Command);
3358   }
3359 }
3360
3361 /*
3362   DAC960_ProcessRequest attempts to remove one I/O Request from Controller's
3363   I/O Request Queue and queues it to the Controller.  WaitForCommand is true if
3364   this function should wait for a Command to become available if necessary.
3365   This function returns true if an I/O Request was queued and false otherwise.
3366 */
3367 static void DAC960_ProcessRequest(DAC960_Controller_T *controller)
3368 {
3369         int i;
3370
3371         if (!controller->ControllerInitialized)
3372                 return;
3373
3374         /* Do this better later! */
3375         for (i = controller->req_q_index; i < DAC960_MaxLogicalDrives; i++) {
3376                 struct request_queue *req_q = controller->RequestQueue[i];
3377
3378                 if (req_q == NULL)
3379                         continue;
3380
3381                 if (!DAC960_process_queue(controller, req_q)) {
3382                         controller->req_q_index = i;
3383                         return;
3384                 }
3385         }
3386
3387         if (controller->req_q_index == 0)
3388                 return;
3389
3390         for (i = 0; i < controller->req_q_index; i++) {
3391                 struct request_queue *req_q = controller->RequestQueue[i];
3392
3393                 if (req_q == NULL)
3394                         continue;
3395
3396                 if (!DAC960_process_queue(controller, req_q)) {
3397                         controller->req_q_index = i;
3398                         return;
3399                 }
3400         }
3401 }
3402
3403
3404 /*
3405   DAC960_queue_partial_rw extracts one bio from the request already
3406   associated with argument command, and construct a new command block to retry I/O
3407   only on that bio.  Queue that command to the controller.
3408
3409   This function re-uses a previously-allocated Command,
3410         there is no failure mode from trying to allocate a command.
3411 */
3412
3413 static void DAC960_queue_partial_rw(DAC960_Command_T *Command)
3414 {
3415   DAC960_Controller_T *Controller = Command->Controller;
3416   struct request *Request = Command->Request;
3417   struct request_queue *req_q = Controller->RequestQueue[Command->LogicalDriveNumber];
3418
3419   if (Command->DmaDirection == PCI_DMA_FROMDEVICE)
3420     Command->CommandType = DAC960_ReadRetryCommand;
3421   else
3422     Command->CommandType = DAC960_WriteRetryCommand;
3423
3424   /*
3425    * We could be more efficient with these mapping requests
3426    * and map only the portions that we need.  But since this
3427    * code should almost never be called, just go with a
3428    * simple coding.
3429    */
3430   (void)blk_rq_map_sg(req_q, Command->Request, Command->cmd_sglist);
3431
3432   (void)pci_map_sg(Controller->PCIDevice, Command->cmd_sglist, 1, Command->DmaDirection);
3433   /*
3434    * Resubmitting the request sector at a time is really tedious.
3435    * But, this should almost never happen.  So, we're willing to pay
3436    * this price so that in the end, as much of the transfer is completed
3437    * successfully as possible.
3438    */
3439   Command->SegmentCount = 1;
3440   Command->BlockNumber = blk_rq_pos(Request);
3441   Command->BlockCount = 1;
3442   DAC960_QueueReadWriteCommand(Command);
3443   return;
3444 }
3445
3446 /*
3447   DAC960_RequestFunction is the I/O Request Function for DAC960 Controllers.
3448 */
3449
3450 static void DAC960_RequestFunction(struct request_queue *RequestQueue)
3451 {
3452         DAC960_ProcessRequest(RequestQueue->queuedata);
3453 }
3454
3455 /*
3456   DAC960_ProcessCompletedBuffer performs completion processing for an
3457   individual Buffer.
3458 */
3459
3460 static inline bool DAC960_ProcessCompletedRequest(DAC960_Command_T *Command,
3461                                                  bool SuccessfulIO)
3462 {
3463         struct request *Request = Command->Request;
3464         int Error = SuccessfulIO ? 0 : -EIO;
3465
3466         pci_unmap_sg(Command->Controller->PCIDevice, Command->cmd_sglist,
3467                 Command->SegmentCount, Command->DmaDirection);
3468
3469          if (!__blk_end_request(Request, Error, Command->BlockCount << 9)) {
3470                 if (Command->Completion) {
3471                         complete(Command->Completion);
3472                         Command->Completion = NULL;
3473                 }
3474                 return true;
3475         }
3476         return false;
3477 }
3478
3479 /*
3480   DAC960_V1_ReadWriteError prints an appropriate error message for Command
3481   when an error occurs on a Read or Write operation.
3482 */
3483
3484 static void DAC960_V1_ReadWriteError(DAC960_Command_T *Command)
3485 {
3486   DAC960_Controller_T *Controller = Command->Controller;
3487   unsigned char *CommandName = "UNKNOWN";
3488   switch (Command->CommandType)
3489     {
3490     case DAC960_ReadCommand:
3491     case DAC960_ReadRetryCommand:
3492       CommandName = "READ";
3493       break;
3494     case DAC960_WriteCommand:
3495     case DAC960_WriteRetryCommand:
3496       CommandName = "WRITE";
3497       break;
3498     case DAC960_MonitoringCommand:
3499     case DAC960_ImmediateCommand:
3500     case DAC960_QueuedCommand:
3501       break;
3502     }
3503   switch (Command->V1.CommandStatus)
3504     {
3505     case DAC960_V1_IrrecoverableDataError:
3506       DAC960_Error("Irrecoverable Data Error on %s:\n",
3507                    Controller, CommandName);
3508       break;
3509     case DAC960_V1_LogicalDriveNonexistentOrOffline:
3510       DAC960_Error("Logical Drive Nonexistent or Offline on %s:\n",
3511                    Controller, CommandName);
3512       break;
3513     case DAC960_V1_AccessBeyondEndOfLogicalDrive:
3514       DAC960_Error("Attempt to Access Beyond End of Logical Drive "
3515                    "on %s:\n", Controller, CommandName);
3516       break;
3517     case DAC960_V1_BadDataEncountered:
3518       DAC960_Error("Bad Data Encountered on %s:\n", Controller, CommandName);
3519       break;
3520     default:
3521       DAC960_Error("Unexpected Error Status %04X on %s:\n",
3522                    Controller, Command->V1.CommandStatus, CommandName);
3523       break;
3524     }
3525   DAC960_Error("  /dev/rd/c%dd%d:   absolute blocks %u..%u\n",
3526                Controller, Controller->ControllerNumber,
3527                Command->LogicalDriveNumber, Command->BlockNumber,
3528                Command->BlockNumber + Command->BlockCount - 1);
3529 }
3530
3531
3532 /*
3533   DAC960_V1_ProcessCompletedCommand performs completion processing for Command
3534   for DAC960 V1 Firmware Controllers.
3535 */
3536
3537 static void DAC960_V1_ProcessCompletedCommand(DAC960_Command_T *Command)
3538 {
3539   DAC960_Controller_T *Controller = Command->Controller;
3540   DAC960_CommandType_T CommandType = Command->CommandType;
3541   DAC960_V1_CommandOpcode_T CommandOpcode =
3542     Command->V1.CommandMailbox.Common.CommandOpcode;
3543   DAC960_V1_CommandStatus_T CommandStatus = Command->V1.CommandStatus;
3544
3545   if (CommandType == DAC960_ReadCommand ||
3546       CommandType == DAC960_WriteCommand)
3547     {
3548
3549 #ifdef FORCE_RETRY_DEBUG
3550       CommandStatus = DAC960_V1_IrrecoverableDataError;
3551 #endif
3552
3553       if (CommandStatus == DAC960_V1_NormalCompletion) {
3554
3555                 if (!DAC960_ProcessCompletedRequest(Command, true))
3556                         BUG();
3557
3558       } else if (CommandStatus == DAC960_V1_IrrecoverableDataError ||
3559                 CommandStatus == DAC960_V1_BadDataEncountered)
3560         {
3561           /*
3562            * break the command down into pieces and resubmit each
3563            * piece, hoping that some of them will succeed.
3564            */
3565            DAC960_queue_partial_rw(Command);
3566            return;
3567         }
3568       else
3569         {
3570           if (CommandStatus != DAC960_V1_LogicalDriveNonexistentOrOffline)
3571             DAC960_V1_ReadWriteError(Command);
3572
3573          if (!DAC960_ProcessCompletedRequest(Command, false))
3574                 BUG();
3575         }
3576     }
3577   else if (CommandType == DAC960_ReadRetryCommand ||
3578            CommandType == DAC960_WriteRetryCommand)
3579     {
3580       bool normal_completion;
3581 #ifdef FORCE_RETRY_FAILURE_DEBUG
3582       static int retry_count = 1;
3583 #endif
3584       /*
3585         Perform completion processing for the portion that was
3586         retried, and submit the next portion, if any.
3587       */
3588       normal_completion = true;
3589       if (CommandStatus != DAC960_V1_NormalCompletion) {
3590         normal_completion = false;
3591         if (CommandStatus != DAC960_V1_LogicalDriveNonexistentOrOffline)
3592             DAC960_V1_ReadWriteError(Command);
3593       }
3594
3595 #ifdef FORCE_RETRY_FAILURE_DEBUG
3596       if (!(++retry_count % 10000)) {
3597               printk("V1 error retry failure test\n");
3598               normal_completion = false;
3599               DAC960_V1_ReadWriteError(Command);
3600       }
3601 #endif
3602
3603       if (!DAC960_ProcessCompletedRequest(Command, normal_completion)) {
3604         DAC960_queue_partial_rw(Command);
3605         return;
3606       }
3607     }
3608
3609   else if (CommandType == DAC960_MonitoringCommand)
3610     {
3611       if (Controller->ShutdownMonitoringTimer)
3612               return;
3613       if (CommandOpcode == DAC960_V1_Enquiry)
3614         {
3615           DAC960_V1_Enquiry_T *OldEnquiry = &Controller->V1.Enquiry;
3616           DAC960_V1_Enquiry_T *NewEnquiry = Controller->V1.NewEnquiry;
3617           unsigned int OldCriticalLogicalDriveCount =
3618             OldEnquiry->CriticalLogicalDriveCount;
3619           unsigned int NewCriticalLogicalDriveCount =
3620             NewEnquiry->CriticalLogicalDriveCount;
3621           if (NewEnquiry->NumberOfLogicalDrives > Controller->LogicalDriveCount)
3622             {
3623               int LogicalDriveNumber = Controller->LogicalDriveCount - 1;
3624               while (++LogicalDriveNumber < NewEnquiry->NumberOfLogicalDrives)
3625                 DAC960_Critical("Logical Drive %d (/dev/rd/c%dd%d) "
3626                                 "Now Exists\n", Controller,
3627                                 LogicalDriveNumber,
3628                                 Controller->ControllerNumber,
3629                                 LogicalDriveNumber);
3630               Controller->LogicalDriveCount = NewEnquiry->NumberOfLogicalDrives;
3631               DAC960_ComputeGenericDiskInfo(Controller);
3632             }
3633           if (NewEnquiry->NumberOfLogicalDrives < Controller->LogicalDriveCount)
3634             {
3635               int LogicalDriveNumber = NewEnquiry->NumberOfLogicalDrives - 1;
3636               while (++LogicalDriveNumber < Controller->LogicalDriveCount)
3637                 DAC960_Critical("Logical Drive %d (/dev/rd/c%dd%d) "
3638                                 "No Longer Exists\n", Controller,
3639                                 LogicalDriveNumber,
3640                                 Controller->ControllerNumber,
3641                                 LogicalDriveNumber);
3642               Controller->LogicalDriveCount = NewEnquiry->NumberOfLogicalDrives;
3643               DAC960_ComputeGenericDiskInfo(Controller);
3644             }
3645           if (NewEnquiry->StatusFlags.DeferredWriteError !=
3646               OldEnquiry->StatusFlags.DeferredWriteError)
3647             DAC960_Critical("Deferred Write Error Flag is now %s\n", Controller,
3648                             (NewEnquiry->StatusFlags.DeferredWriteError
3649                              ? "TRUE" : "FALSE"));
3650           if ((NewCriticalLogicalDriveCount > 0 ||
3651                NewCriticalLogicalDriveCount != OldCriticalLogicalDriveCount) ||
3652               (NewEnquiry->OfflineLogicalDriveCount > 0 ||
3653                NewEnquiry->OfflineLogicalDriveCount !=
3654                OldEnquiry->OfflineLogicalDriveCount) ||
3655               (NewEnquiry->DeadDriveCount > 0 ||
3656                NewEnquiry->DeadDriveCount !=
3657                OldEnquiry->DeadDriveCount) ||
3658               (NewEnquiry->EventLogSequenceNumber !=
3659                OldEnquiry->EventLogSequenceNumber) ||
3660               Controller->MonitoringTimerCount == 0 ||
3661               time_after_eq(jiffies, Controller->SecondaryMonitoringTime
3662                + DAC960_SecondaryMonitoringInterval))
3663             {
3664               Controller->V1.NeedLogicalDriveInformation = true;
3665               Controller->V1.NewEventLogSequenceNumber =
3666                 NewEnquiry->EventLogSequenceNumber;
3667               Controller->V1.NeedErrorTableInformation = true;
3668               Controller->V1.NeedDeviceStateInformation = true;
3669               Controller->V1.StartDeviceStateScan = true;
3670               Controller->V1.NeedBackgroundInitializationStatus =
3671                 Controller->V1.BackgroundInitializationStatusSupported;
3672               Controller->SecondaryMonitoringTime = jiffies;
3673             }
3674           if (NewEnquiry->RebuildFlag == DAC960_V1_StandbyRebuildInProgress ||
3675               NewEnquiry->RebuildFlag
3676               == DAC960_V1_BackgroundRebuildInProgress ||
3677               OldEnquiry->RebuildFlag == DAC960_V1_StandbyRebuildInProgress ||
3678               OldEnquiry->RebuildFlag == DAC960_V1_BackgroundRebuildInProgress)
3679             {
3680               Controller->V1.NeedRebuildProgress = true;
3681               Controller->V1.RebuildProgressFirst =
3682                 (NewEnquiry->CriticalLogicalDriveCount <
3683                  OldEnquiry->CriticalLogicalDriveCount);
3684             }
3685           if (OldEnquiry->RebuildFlag == DAC960_V1_BackgroundCheckInProgress)
3686             switch (NewEnquiry->RebuildFlag)
3687               {
3688               case DAC960_V1_NoStandbyRebuildOrCheckInProgress:
3689                 DAC960_Progress("Consistency Check Completed Successfully\n",
3690                                 Controller);
3691                 break;
3692               case DAC960_V1_StandbyRebuildInProgress:
3693               case DAC960_V1_BackgroundRebuildInProgress:
3694                 break;
3695               case DAC960_V1_BackgroundCheckInProgress:
3696                 Controller->V1.NeedConsistencyCheckProgress = true;
3697                 break;
3698               case DAC960_V1_StandbyRebuildCompletedWithError:
3699                 DAC960_Progress("Consistency Check Completed with Error\n",
3700                                 Controller);
3701                 break;
3702               case DAC960_V1_BackgroundRebuildOrCheckFailed_DriveFailed:
3703                 DAC960_Progress("Consistency Check Failed - "
3704                                 "Physical Device Failed\n", Controller);
3705                 break;
3706               case DAC960_V1_BackgroundRebuildOrCheckFailed_LogicalDriveFailed:
3707                 DAC960_Progress("Consistency Check Failed - "
3708                                 "Logical Drive Failed\n", Controller);
3709                 break;
3710               case DAC960_V1_BackgroundRebuildOrCheckFailed_OtherCauses:
3711                 DAC960_Progress("Consistency Check Failed - Other Causes\n",
3712                                 Controller);
3713                 break;
3714               case DAC960_V1_BackgroundRebuildOrCheckSuccessfullyTerminated:
3715                 DAC960_Progress("Consistency Check Successfully Terminated\n",
3716                                 Controller);
3717                 break;
3718               }
3719           else if (NewEnquiry->RebuildFlag
3720                    == DAC960_V1_BackgroundCheckInProgress)
3721             Controller->V1.NeedConsistencyCheckProgress = true;
3722           Controller->MonitoringAlertMode =
3723             (NewEnquiry->CriticalLogicalDriveCount > 0 ||
3724              NewEnquiry->OfflineLogicalDriveCount > 0 ||
3725              NewEnquiry->DeadDriveCount > 0);
3726           if (NewEnquiry->RebuildFlag > DAC960_V1_BackgroundCheckInProgress)
3727             {
3728               Controller->V1.PendingRebuildFlag = NewEnquiry->RebuildFlag;
3729               Controller->V1.RebuildFlagPending = true;
3730             }
3731           memcpy(&Controller->V1.Enquiry, &Controller->V1.NewEnquiry,
3732                  sizeof(DAC960_V1_Enquiry_T));
3733         }
3734       else if (CommandOpcode == DAC960_V1_PerformEventLogOperation)
3735         {
3736           static char
3737             *DAC960_EventMessages[] =
3738                { "killed because write recovery failed",
3739                  "killed because of SCSI bus reset failure",
3740                  "killed because of double check condition",
3741                  "killed because it was removed",
3742                  "killed because of gross error on SCSI chip",
3743                  "killed because of bad tag returned from drive",
3744                  "killed because of timeout on SCSI command",
3745                  "killed because of reset SCSI command issued from system",
3746                  "killed because busy or parity error count exceeded limit",
3747                  "killed because of 'kill drive' command from system",
3748                  "killed because of selection timeout",
3749                  "killed due to SCSI phase sequence error",
3750                  "killed due to unknown status" };
3751           DAC960_V1_EventLogEntry_T *EventLogEntry =
3752                 Controller->V1.EventLogEntry;
3753           if (EventLogEntry->SequenceNumber ==
3754               Controller->V1.OldEventLogSequenceNumber)
3755             {
3756               unsigned char SenseKey = EventLogEntry->SenseKey;
3757               unsigned char AdditionalSenseCode =
3758                 EventLogEntry->AdditionalSenseCode;
3759               unsigned char AdditionalSenseCodeQualifier =
3760                 EventLogEntry->AdditionalSenseCodeQualifier;
3761               if (SenseKey == DAC960_SenseKey_VendorSpecific &&
3762                   AdditionalSenseCode == 0x80 &&
3763                   AdditionalSenseCodeQualifier <
3764                   ARRAY_SIZE(DAC960_EventMessages))
3765                 DAC960_Critical("Physical Device %d:%d %s\n", Controller,
3766                                 EventLogEntry->Channel,
3767                                 EventLogEntry->TargetID,
3768                                 DAC960_EventMessages[
3769                                   AdditionalSenseCodeQualifier]);
3770               else if (SenseKey == DAC960_SenseKey_UnitAttention &&
3771                        AdditionalSenseCode == 0x29)
3772                 {
3773                   if (Controller->MonitoringTimerCount > 0)
3774                     Controller->V1.DeviceResetCount[EventLogEntry->Channel]
3775                                                    [EventLogEntry->TargetID]++;
3776                 }
3777               else if (!(SenseKey == DAC960_SenseKey_NoSense ||
3778                          (SenseKey == DAC960_SenseKey_NotReady &&
3779                           AdditionalSenseCode == 0x04 &&
3780                           (AdditionalSenseCodeQualifier == 0x01 ||
3781                            AdditionalSenseCodeQualifier == 0x02))))
3782                 {
3783                   DAC960_Critical("Physical Device %d:%d Error Log: "
3784                                   "Sense Key = %X, ASC = %02X, ASCQ = %02X\n",
3785                                   Controller,
3786                                   EventLogEntry->Channel,
3787                                   EventLogEntry->TargetID,
3788                                   SenseKey,
3789                                   AdditionalSenseCode,
3790                                   AdditionalSenseCodeQualifier);
3791                   DAC960_Critical("Physical Device %d:%d Error Log: "
3792                                   "Information = %02X%02X%02X%02X "
3793                                   "%02X%02X%02X%02X\n",
3794                                   Controller,
3795                                   EventLogEntry->Channel,
3796                                   EventLogEntry->TargetID,
3797                                   EventLogEntry->Information[0],
3798                                   EventLogEntry->Information[1],
3799                                   EventLogEntry->Information[2],
3800                                   EventLogEntry->Information[3],
3801                                   EventLogEntry->CommandSpecificInformation[0],
3802                                   EventLogEntry->CommandSpecificInformation[1],
3803                                   EventLogEntry->CommandSpecificInformation[2],
3804                                   EventLogEntry->CommandSpecificInformation[3]);
3805                 }
3806             }
3807           Controller->V1.OldEventLogSequenceNumber++;
3808         }
3809       else if (CommandOpcode == DAC960_V1_GetErrorTable)
3810         {
3811           DAC960_V1_ErrorTable_T *OldErrorTable = &Controller->V1.ErrorTable;
3812           DAC960_V1_ErrorTable_T *NewErrorTable = Controller->V1.NewErrorTable;
3813           int Channel, TargetID;
3814           for (Channel = 0; Channel < Controller->Channels; Channel++)
3815             for (TargetID = 0; TargetID < Controller->Targets; TargetID++)
3816               {
3817                 DAC960_V1_ErrorTableEntry_T *NewErrorEntry =
3818                   &NewErrorTable->ErrorTableEntries[Channel][TargetID];
3819                 DAC960_V1_ErrorTableEntry_T *OldErrorEntry =
3820                   &OldErrorTable->ErrorTableEntries[Channel][TargetID];
3821                 if ((NewErrorEntry->ParityErrorCount !=
3822                      OldErrorEntry->ParityErrorCount) ||
3823                     (NewErrorEntry->SoftErrorCount !=
3824                      OldErrorEntry->SoftErrorCount) ||
3825                     (NewErrorEntry->HardErrorCount !=
3826                      OldErrorEntry->HardErrorCount) ||
3827                     (NewErrorEntry->MiscErrorCount !=
3828                      OldErrorEntry->MiscErrorCount))
3829                   DAC960_Critical("Physical Device %d:%d Errors: "
3830                                   "Parity = %d, Soft = %d, "
3831                                   "Hard = %d, Misc = %d\n",
3832                                   Controller, Channel, TargetID,
3833                                   NewErrorEntry->ParityErrorCount,
3834                                   NewErrorEntry->SoftErrorCount,
3835                                   NewErrorEntry->HardErrorCount,
3836                                   NewErrorEntry->MiscErrorCount);
3837               }
3838           memcpy(&Controller->V1.ErrorTable, Controller->V1.NewErrorTable,
3839                  sizeof(DAC960_V1_ErrorTable_T));
3840         }
3841       else if (CommandOpcode == DAC960_V1_GetDeviceState)
3842         {
3843           DAC960_V1_DeviceState_T *OldDeviceState =
3844             &Controller->V1.DeviceState[Controller->V1.DeviceStateChannel]
3845                                        [Controller->V1.DeviceStateTargetID];
3846           DAC960_V1_DeviceState_T *NewDeviceState =
3847             Controller->V1.NewDeviceState;
3848           if (NewDeviceState->DeviceState != OldDeviceState->DeviceState)
3849             DAC960_Critical("Physical Device %d:%d is now %s\n", Controller,
3850                             Controller->V1.DeviceStateChannel,
3851                             Controller->V1.DeviceStateTargetID,
3852                             (NewDeviceState->DeviceState
3853                              == DAC960_V1_Device_Dead
3854                              ? "DEAD"
3855                              : NewDeviceState->DeviceState
3856                                == DAC960_V1_Device_WriteOnly
3857                                ? "WRITE-ONLY"
3858                                : NewDeviceState->DeviceState
3859                                  == DAC960_V1_Device_Online
3860                                  ? "ONLINE" : "STANDBY"));
3861           if (OldDeviceState->DeviceState == DAC960_V1_Device_Dead &&
3862               NewDeviceState->DeviceState != DAC960_V1_Device_Dead)
3863             {
3864               Controller->V1.NeedDeviceInquiryInformation = true;
3865               Controller->V1.NeedDeviceSerialNumberInformation = true;
3866               Controller->V1.DeviceResetCount
3867                              [Controller->V1.DeviceStateChannel]
3868                              [Controller->V1.DeviceStateTargetID] = 0;
3869             }
3870           memcpy(OldDeviceState, NewDeviceState,
3871                  sizeof(DAC960_V1_DeviceState_T));
3872         }
3873       else if (CommandOpcode == DAC960_V1_GetLogicalDriveInformation)
3874         {
3875           int LogicalDriveNumber;
3876           for (LogicalDriveNumber = 0;
3877                LogicalDriveNumber < Controller->LogicalDriveCount;
3878                LogicalDriveNumber++)
3879             {
3880               DAC960_V1_LogicalDriveInformation_T *OldLogicalDriveInformation =
3881                 &Controller->V1.LogicalDriveInformation[LogicalDriveNumber];
3882               DAC960_V1_LogicalDriveInformation_T *NewLogicalDriveInformation =
3883                 &(*Controller->V1.NewLogicalDriveInformation)[LogicalDriveNumber];
3884               if (NewLogicalDriveInformation->LogicalDriveState !=
3885                   OldLogicalDriveInformation->LogicalDriveState)
3886                 DAC960_Critical("Logical Drive %d (/dev/rd/c%dd%d) "
3887                                 "is now %s\n", Controller,
3888                                 LogicalDriveNumber,
3889                                 Controller->ControllerNumber,
3890                                 LogicalDriveNumber,
3891                                 (NewLogicalDriveInformation->LogicalDriveState
3892                                  == DAC960_V1_LogicalDrive_Online
3893                                  ? "ONLINE"
3894                                  : NewLogicalDriveInformation->LogicalDriveState
3895                                    == DAC960_V1_LogicalDrive_Critical
3896                                    ? "CRITICAL" : "OFFLINE"));
3897               if (NewLogicalDriveInformation->WriteBack !=
3898                   OldLogicalDriveInformation->WriteBack)
3899                 DAC960_Critical("Logical Drive %d (/dev/rd/c%dd%d) "
3900                                 "is now %s\n", Controller,
3901                                 LogicalDriveNumber,
3902                                 Controller->ControllerNumber,
3903                                 LogicalDriveNumber,
3904                                 (NewLogicalDriveInformation->WriteBack
3905                                  ? "WRITE BACK" : "WRITE THRU"));
3906             }
3907           memcpy(&Controller->V1.LogicalDriveInformation,
3908                  Controller->V1.NewLogicalDriveInformation,
3909                  sizeof(DAC960_V1_LogicalDriveInformationArray_T));
3910         }
3911       else if (CommandOpcode == DAC960_V1_GetRebuildProgress)
3912         {
3913           unsigned int LogicalDriveNumber =
3914             Controller->V1.RebuildProgress->LogicalDriveNumber;
3915           unsigned int LogicalDriveSize =
3916             Controller->V1.RebuildProgress->LogicalDriveSize;
3917           unsigned int BlocksCompleted =
3918             LogicalDriveSize - Controller->V1.RebuildProgress->RemainingBlocks;
3919           if (CommandStatus == DAC960_V1_NoRebuildOrCheckInProgress &&
3920               Controller->V1.LastRebuildStatus == DAC960_V1_NormalCompletion)
3921             CommandStatus = DAC960_V1_RebuildSuccessful;
3922           switch (CommandStatus)
3923             {
3924             case DAC960_V1_NormalCompletion:
3925               Controller->EphemeralProgressMessage = true;
3926               DAC960_Progress("Rebuild in Progress: "
3927                               "Logical Drive %d (/dev/rd/c%dd%d) "
3928                               "%d%% completed\n",
3929                               Controller, LogicalDriveNumber,
3930                               Controller->ControllerNumber,
3931                               LogicalDriveNumber,
3932                               (100 * (BlocksCompleted >> 7))
3933                               / (LogicalDriveSize >> 7));
3934               Controller->EphemeralProgressMessage = false;
3935               break;
3936             case DAC960_V1_RebuildFailed_LogicalDriveFailure:
3937               DAC960_Progress("Rebuild Failed due to "
3938                               "Logical Drive Failure\n", Controller);
3939               break;
3940             case DAC960_V1_RebuildFailed_BadBlocksOnOther:
3941               DAC960_Progress("Rebuild Failed due to "
3942                               "Bad Blocks on Other Drives\n", Controller);
3943               break;
3944             case DAC960_V1_RebuildFailed_NewDriveFailed:
3945               DAC960_Progress("Rebuild Failed due to "
3946                               "Failure of Drive Being Rebuilt\n", Controller);
3947               break;
3948             case DAC960_V1_NoRebuildOrCheckInProgress:
3949               break;
3950             case DAC960_V1_RebuildSuccessful:
3951               DAC960_Progress("Rebuild Completed Successfully\n", Controller);
3952               break;
3953             case DAC960_V1_RebuildSuccessfullyTerminated:
3954               DAC960_Progress("Rebuild Successfully Terminated\n", Controller);
3955               break;
3956             }
3957           Controller->V1.LastRebuildStatus = CommandStatus;
3958           if (CommandType != DAC960_MonitoringCommand &&
3959               Controller->V1.RebuildStatusPending)
3960             {
3961               Command->V1.CommandStatus = Controller->V1.PendingRebuildStatus;
3962               Controller->V1.RebuildStatusPending = false;
3963             }
3964           else if (CommandType == DAC960_MonitoringCommand &&
3965                    CommandStatus != DAC960_V1_NormalCompletion &&
3966                    CommandStatus != DAC960_V1_NoRebuildOrCheckInProgress)
3967             {
3968               Controller->V1.PendingRebuildStatus = CommandStatus;
3969               Controller->V1.RebuildStatusPending = true;
3970             }
3971         }
3972       else if (CommandOpcode == DAC960_V1_RebuildStat)
3973         {
3974           unsigned int LogicalDriveNumber =
3975             Controller->V1.RebuildProgress->LogicalDriveNumber;
3976           unsigned int LogicalDriveSize =
3977             Controller->V1.RebuildProgress->LogicalDriveSize;
3978           unsigned int BlocksCompleted =
3979             LogicalDriveSize - Controller->V1.RebuildProgress->RemainingBlocks;
3980           if (CommandStatus == DAC960_V1_NormalCompletion)
3981             {
3982               Controller->EphemeralProgressMessage = true;
3983               DAC960_Progress("Consistency Check in Progress: "
3984                               "Logical Drive %d (/dev/rd/c%dd%d) "
3985                               "%d%% completed\n",
3986                               Controller, LogicalDriveNumber,
3987                               Controller->ControllerNumber,
3988                               LogicalDriveNumber,
3989                               (100 * (BlocksCompleted >> 7))
3990                               / (LogicalDriveSize >> 7));
3991               Controller->EphemeralProgressMessage = false;
3992             }
3993         }
3994       else if (CommandOpcode == DAC960_V1_BackgroundInitializationControl)
3995         {
3996           unsigned int LogicalDriveNumber =
3997             Controller->V1.BackgroundInitializationStatus->LogicalDriveNumber;
3998           unsigned int LogicalDriveSize =
3999             Controller->V1.BackgroundInitializationStatus->LogicalDriveSize;
4000           unsigned int BlocksCompleted =
4001             Controller->V1.BackgroundInitializationStatus->BlocksCompleted;
4002           switch (CommandStatus)
4003             {
4004             case DAC960_V1_NormalCompletion:
4005               switch (Controller->V1.BackgroundInitializationStatus->Status)
4006                 {
4007                 case DAC960_V1_BackgroundInitializationInvalid:
4008                   break;
4009                 case DAC960_V1_BackgroundInitializationStarted:
4010                   DAC960_Progress("Background Initialization Started\n",
4011                                   Controller);
4012                   break;
4013                 case DAC960_V1_BackgroundInitializationInProgress:
4014                   if (BlocksCompleted ==
4015                       Controller->V1.LastBackgroundInitializationStatus.
4016                                 BlocksCompleted &&
4017                       LogicalDriveNumber ==
4018                       Controller->V1.LastBackgroundInitializationStatus.
4019                                 LogicalDriveNumber)
4020                     break;
4021                   Controller->EphemeralProgressMessage = true;
4022                   DAC960_Progress("Background Initialization in Progress: "
4023                                   "Logical Drive %d (/dev/rd/c%dd%d) "
4024                                   "%d%% completed\n",
4025                                   Controller, LogicalDriveNumber,
4026                                   Controller->ControllerNumber,
4027                                   LogicalDriveNumber,
4028                                   (100 * (BlocksCompleted >> 7))
4029                                   / (LogicalDriveSize >> 7));
4030                   Controller->EphemeralProgressMessage = false;
4031                   break;
4032                 case DAC960_V1_BackgroundInitializationSuspended:
4033                   DAC960_Progress("Background Initialization Suspended\n",
4034                                   Controller);
4035                   break;
4036                 case DAC960_V1_BackgroundInitializationCancelled:
4037                   DAC960_Progress("Background Initialization Cancelled\n",
4038                                   Controller);
4039                   break;
4040                 }
4041               memcpy(&Controller->V1.LastBackgroundInitializationStatus,
4042                      Controller->V1.BackgroundInitializationStatus,
4043                      sizeof(DAC960_V1_BackgroundInitializationStatus_T));
4044               break;
4045             case DAC960_V1_BackgroundInitSuccessful:
4046               if (Controller->V1.BackgroundInitializationStatus->Status ==
4047                   DAC960_V1_BackgroundInitializationInProgress)
4048                 DAC960_Progress("Background Initialization "
4049                                 "Completed Successfully\n", Controller);
4050               Controller->V1.BackgroundInitializationStatus->Status =
4051                 DAC960_V1_BackgroundInitializationInvalid;
4052               break;
4053             case DAC960_V1_BackgroundInitAborted:
4054               if (Controller->V1.BackgroundInitializationStatus->Status ==
4055                   DAC960_V1_BackgroundInitializationInProgress)
4056                 DAC960_Progress("Background Initialization Aborted\n",
4057                                 Controller);
4058               Controller->V1.BackgroundInitializationStatus->Status =
4059                 DAC960_V1_BackgroundInitializationInvalid;
4060               break;
4061             case DAC960_V1_NoBackgroundInitInProgress:
4062               break;
4063             }
4064         }
4065       else if (CommandOpcode == DAC960_V1_DCDB)
4066         {
4067            /*
4068              This is a bit ugly.
4069
4070              The InquiryStandardData and
4071              the InquiryUntitSerialNumber information
4072              retrieval operations BOTH use the DAC960_V1_DCDB
4073              commands.  the test above can't distinguish between
4074              these two cases.
4075
4076              Instead, we rely on the order of code later in this
4077              function to ensure that DeviceInquiryInformation commands
4078              are submitted before DeviceSerialNumber commands.
4079            */
4080            if (Controller->V1.NeedDeviceInquiryInformation)
4081              {
4082                 DAC960_SCSI_Inquiry_T *InquiryStandardData =
4083                         &Controller->V1.InquiryStandardData
4084                                 [Controller->V1.DeviceStateChannel]
4085                                 [Controller->V1.DeviceStateTargetID];
4086                 if (CommandStatus != DAC960_V1_NormalCompletion)
4087                    {
4088                         memset(InquiryStandardData, 0,
4089                                 sizeof(DAC960_SCSI_Inquiry_T));
4090                         InquiryStandardData->PeripheralDeviceType = 0x1F;
4091                     }
4092                  else
4093                         memcpy(InquiryStandardData,
4094                                 Controller->V1.NewInquiryStandardData,
4095                                 sizeof(DAC960_SCSI_Inquiry_T));
4096                  Controller->V1.NeedDeviceInquiryInformation = false;
4097               }
4098            else if (Controller->V1.NeedDeviceSerialNumberInformation)
4099               {
4100                 DAC960_SCSI_Inquiry_UnitSerialNumber_T *InquiryUnitSerialNumber =
4101                   &Controller->V1.InquiryUnitSerialNumber
4102                                 [Controller->V1.DeviceStateChannel]
4103                                 [Controller->V1.DeviceStateTargetID];
4104                  if (CommandStatus != DAC960_V1_NormalCompletion)
4105                    {
4106                         memset(InquiryUnitSerialNumber, 0,
4107                                 sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T));
4108                         InquiryUnitSerialNumber->PeripheralDeviceType = 0x1F;
4109                     }
4110                   else
4111                         memcpy(InquiryUnitSerialNumber,
4112                                 Controller->V1.NewInquiryUnitSerialNumber,
4113                                 sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T));
4114               Controller->V1.NeedDeviceSerialNumberInformation = false;
4115              }
4116         }
4117       /*
4118         Begin submitting new monitoring commands.
4119        */
4120       if (Controller->V1.NewEventLogSequenceNumber
4121           - Controller->V1.OldEventLogSequenceNumber > 0)
4122         {
4123           Command->V1.CommandMailbox.Type3E.CommandOpcode =
4124             DAC960_V1_PerformEventLogOperation;
4125           Command->V1.CommandMailbox.Type3E.OperationType =
4126             DAC960_V1_GetEventLogEntry;
4127           Command->V1.CommandMailbox.Type3E.OperationQualifier = 1;
4128           Command->V1.CommandMailbox.Type3E.SequenceNumber =
4129             Controller->V1.OldEventLogSequenceNumber;
4130           Command->V1.CommandMailbox.Type3E.BusAddress =
4131                 Controller->V1.EventLogEntryDMA;
4132           DAC960_QueueCommand(Command);
4133           return;
4134         }
4135       if (Controller->V1.NeedErrorTableInformation)
4136         {
4137           Controller->V1.NeedErrorTableInformation = false;
4138           Command->V1.CommandMailbox.Type3.CommandOpcode =
4139             DAC960_V1_GetErrorTable;
4140           Command->V1.CommandMailbox.Type3.BusAddress =
4141                 Controller->V1.NewErrorTableDMA;
4142           DAC960_QueueCommand(Command);
4143           return;
4144         }
4145       if (Controller->V1.NeedRebuildProgress &&
4146           Controller->V1.RebuildProgressFirst)
4147         {
4148           Controller->V1.NeedRebuildProgress = false;
4149           Command->V1.CommandMailbox.Type3.CommandOpcode =
4150             DAC960_V1_GetRebuildProgress;
4151           Command->V1.CommandMailbox.Type3.BusAddress =
4152             Controller->V1.RebuildProgressDMA;
4153           DAC960_QueueCommand(Command);
4154           return;
4155         }
4156       if (Controller->V1.NeedDeviceStateInformation)
4157         {
4158           if (Controller->V1.NeedDeviceInquiryInformation)
4159             {
4160               DAC960_V1_DCDB_T *DCDB = Controller->V1.MonitoringDCDB;
4161               dma_addr_t DCDB_DMA = Controller->V1.MonitoringDCDB_DMA;
4162
4163               dma_addr_t NewInquiryStandardDataDMA =
4164                 Controller->V1.NewInquiryStandardDataDMA;
4165
4166               Command->V1.CommandMailbox.Type3.CommandOpcode = DAC960_V1_DCDB;
4167               Command->V1.CommandMailbox.Type3.BusAddress = DCDB_DMA;
4168               DCDB->Channel = Controller->V1.DeviceStateChannel;
4169               DCDB->TargetID = Controller->V1.DeviceStateTargetID;
4170               DCDB->Direction = DAC960_V1_DCDB_DataTransferDeviceToSystem;
4171               DCDB->EarlyStatus = false;
4172               DCDB->Timeout = DAC960_V1_DCDB_Timeout_10_seconds;
4173               DCDB->NoAutomaticRequestSense = false;
4174               DCDB->DisconnectPermitted = true;
4175               DCDB->TransferLength = sizeof(DAC960_SCSI_Inquiry_T);
4176               DCDB->BusAddress = NewInquiryStandardDataDMA;
4177               DCDB->CDBLength = 6;
4178               DCDB->TransferLengthHigh4 = 0;
4179               DCDB->SenseLength = sizeof(DCDB->SenseData);
4180               DCDB->CDB[0] = 0x12; /* INQUIRY */
4181               DCDB->CDB[1] = 0; /* EVPD = 0 */
4182               DCDB->CDB[2] = 0; /* Page Code */
4183               DCDB->CDB[3] = 0; /* Reserved */
4184               DCDB->CDB[4] = sizeof(DAC960_SCSI_Inquiry_T);
4185               DCDB->CDB[5] = 0; /* Control */
4186               DAC960_QueueCommand(Command);
4187               return;
4188             }
4189           if (Controller->V1.NeedDeviceSerialNumberInformation)
4190             {
4191               DAC960_V1_DCDB_T *DCDB = Controller->V1.MonitoringDCDB;
4192               dma_addr_t DCDB_DMA = Controller->V1.MonitoringDCDB_DMA;
4193               dma_addr_t NewInquiryUnitSerialNumberDMA =
4194                         Controller->V1.NewInquiryUnitSerialNumberDMA;
4195
4196               Command->V1.CommandMailbox.Type3.CommandOpcode = DAC960_V1_DCDB;
4197               Command->V1.CommandMailbox.Type3.BusAddress = DCDB_DMA;
4198               DCDB->Channel = Controller->V1.DeviceStateChannel;
4199               DCDB->TargetID = Controller->V1.DeviceStateTargetID;
4200               DCDB->Direction = DAC960_V1_DCDB_DataTransferDeviceToSystem;
4201               DCDB->EarlyStatus = false;
4202               DCDB->Timeout = DAC960_V1_DCDB_Timeout_10_seconds;
4203               DCDB->NoAutomaticRequestSense = false;
4204               DCDB->DisconnectPermitted = true;
4205               DCDB->TransferLength =
4206                 sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T);
4207               DCDB->BusAddress = NewInquiryUnitSerialNumberDMA;
4208               DCDB->CDBLength = 6;
4209               DCDB->TransferLengthHigh4 = 0;
4210               DCDB->SenseLength = sizeof(DCDB->SenseData);
4211               DCDB->CDB[0] = 0x12; /* INQUIRY */
4212               DCDB->CDB[1] = 1; /* EVPD = 1 */
4213               DCDB->CDB[2] = 0x80; /* Page Code */
4214               DCDB->CDB[3] = 0; /* Reserved */
4215               DCDB->CDB[4] = sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T);
4216               DCDB->CDB[5] = 0; /* Control */
4217               DAC960_QueueCommand(Command);
4218               return;
4219             }
4220           if (Controller->V1.StartDeviceStateScan)
4221             {
4222               Controller->V1.DeviceStateChannel = 0;
4223               Controller->V1.DeviceStateTargetID = 0;
4224               Controller->V1.StartDeviceStateScan = false;
4225             }
4226           else if (++Controller->V1.DeviceStateTargetID == Controller->Targets)
4227             {
4228               Controller->V1.DeviceStateChannel++;
4229               Controller->V1.DeviceStateTargetID = 0;
4230             }
4231           if (Controller->V1.DeviceStateChannel < Controller->Channels)
4232             {
4233               Controller->V1.NewDeviceState->DeviceState =
4234                 DAC960_V1_Device_Dead;
4235               Command->V1.CommandMailbox.Type3D.CommandOpcode =
4236                 DAC960_V1_GetDeviceState;
4237               Command->V1.CommandMailbox.Type3D.Channel =
4238                 Controller->V1.DeviceStateChannel;
4239               Command->V1.CommandMailbox.Type3D.TargetID =
4240                 Controller->V1.DeviceStateTargetID;
4241               Command->V1.CommandMailbox.Type3D.BusAddress =
4242                 Controller->V1.NewDeviceStateDMA;
4243               DAC960_QueueCommand(Command);
4244               return;
4245             }
4246           Controller->V1.NeedDeviceStateInformation = false;
4247         }
4248       if (Controller->V1.NeedLogicalDriveInformation)
4249         {
4250           Controller->V1.NeedLogicalDriveInformation = false;
4251           Command->V1.CommandMailbox.Type3.CommandOpcode =
4252             DAC960_V1_GetLogicalDriveInformation;
4253           Command->V1.CommandMailbox.Type3.BusAddress =
4254             Controller->V1.NewLogicalDriveInformationDMA;
4255           DAC960_QueueCommand(Command);
4256           return;
4257         }
4258       if (Controller->V1.NeedRebuildProgress)
4259         {
4260           Controller->V1.NeedRebuildProgress = false;
4261           Command->V1.CommandMailbox.Type3.CommandOpcode =
4262             DAC960_V1_GetRebuildProgress;
4263           Command->V1.CommandMailbox.Type3.BusAddress =
4264                 Controller->V1.RebuildProgressDMA;
4265           DAC960_QueueCommand(Command);
4266           return;
4267         }
4268       if (Controller->V1.NeedConsistencyCheckProgress)
4269         {
4270           Controller->V1.NeedConsistencyCheckProgress = false;
4271           Command->V1.CommandMailbox.Type3.CommandOpcode =
4272             DAC960_V1_RebuildStat;
4273           Command->V1.CommandMailbox.Type3.BusAddress =
4274             Controller->V1.RebuildProgressDMA;
4275           DAC960_QueueCommand(Command);
4276           return;
4277         }
4278       if (Controller->V1.NeedBackgroundInitializationStatus)
4279         {
4280           Controller->V1.NeedBackgroundInitializationStatus = false;
4281           Command->V1.CommandMailbox.Type3B.CommandOpcode =
4282             DAC960_V1_BackgroundInitializationControl;
4283           Command->V1.CommandMailbox.Type3B.CommandOpcode2 = 0x20;
4284           Command->V1.CommandMailbox.Type3B.BusAddress =
4285             Controller->V1.BackgroundInitializationStatusDMA;
4286           DAC960_QueueCommand(Command);
4287           return;
4288         }
4289       Controller->MonitoringTimerCount++;
4290       Controller->MonitoringTimer.expires =
4291         jiffies + DAC960_MonitoringTimerInterval;
4292         add_timer(&Controller->MonitoringTimer);
4293     }
4294   if (CommandType == DAC960_ImmediateCommand)
4295     {
4296       complete(Command->Completion);
4297       Command->Completion = NULL;
4298       return;
4299     }
4300   if (CommandType == DAC960_QueuedCommand)
4301     {
4302       DAC960_V1_KernelCommand_T *KernelCommand = Command->V1.KernelCommand;
4303       KernelCommand->CommandStatus = Command->V1.CommandStatus;
4304       Command->V1.KernelCommand = NULL;
4305       if (CommandOpcode == DAC960_V1_DCDB)
4306         Controller->V1.DirectCommandActive[KernelCommand->DCDB->Channel]
4307                                           [KernelCommand->DCDB->TargetID] =
4308           false;
4309       DAC960_DeallocateCommand(Command);
4310       KernelCommand->CompletionFunction(KernelCommand);
4311       return;
4312     }
4313   /*
4314     Queue a Status Monitoring Command to the Controller using the just
4315     completed Command if one was deferred previously due to lack of a
4316     free Command when the Monitoring Timer Function was called.
4317   */
4318   if (Controller->MonitoringCommandDeferred)
4319     {
4320       Controller->MonitoringCommandDeferred = false;
4321       DAC960_V1_QueueMonitoringCommand(Command);
4322       return;
4323     }
4324   /*
4325     Deallocate the Command.
4326   */
4327   DAC960_DeallocateCommand(Command);
4328   /*
4329     Wake up any processes waiting on a free Command.
4330   */
4331   wake_up(&Controller->CommandWaitQueue);
4332 }
4333
4334
4335 /*
4336   DAC960_V2_ReadWriteError prints an appropriate error message for Command
4337   when an error occurs on a Read or Write operation.
4338 */
4339
4340 static void DAC960_V2_ReadWriteError(DAC960_Command_T *Command)
4341 {
4342   DAC960_Controller_T *Controller = Command->Controller;
4343   unsigned char *SenseErrors[] = { "NO SENSE", "RECOVERED ERROR",
4344                                    "NOT READY", "MEDIUM ERROR",
4345                                    "HARDWARE ERROR", "ILLEGAL REQUEST",
4346                                    "UNIT ATTENTION", "DATA PROTECT",
4347                                    "BLANK CHECK", "VENDOR-SPECIFIC",
4348                                    "COPY ABORTED", "ABORTED COMMAND",
4349                                    "EQUAL", "VOLUME OVERFLOW",
4350                                    "MISCOMPARE", "RESERVED" };
4351   unsigned char *CommandName = "UNKNOWN";
4352   switch (Command->CommandType)
4353     {
4354     case DAC960_ReadCommand:
4355     case DAC960_ReadRetryCommand:
4356       CommandName = "READ";
4357       break;
4358     case DAC960_WriteCommand:
4359     case DAC960_WriteRetryCommand:
4360       CommandName = "WRITE";
4361       break;
4362     case DAC960_MonitoringCommand:
4363     case DAC960_ImmediateCommand:
4364     case DAC960_QueuedCommand:
4365       break;
4366     }
4367   DAC960_Error("Error Condition %s on %s:\n", Controller,
4368                SenseErrors[Command->V2.RequestSense->SenseKey], CommandName);
4369   DAC960_Error("  /dev/rd/c%dd%d:   absolute blocks %u..%u\n",
4370                Controller, Controller->ControllerNumber,
4371                Command->LogicalDriveNumber, Command->BlockNumber,
4372                Command->BlockNumber + Command->BlockCount - 1);
4373 }
4374
4375
4376 /*
4377   DAC960_V2_ReportEvent prints an appropriate message when a Controller Event
4378   occurs.
4379 */
4380
4381 static void DAC960_V2_ReportEvent(DAC960_Controller_T *Controller,
4382                                   DAC960_V2_Event_T *Event)
4383 {
4384   DAC960_SCSI_RequestSense_T *RequestSense =
4385     (DAC960_SCSI_RequestSense_T *) &Event->RequestSenseData;
4386   unsigned char MessageBuffer[DAC960_LineBufferSize];
4387   static struct { int EventCode; unsigned char *EventMessage; } EventList[] =
4388     { /* Physical Device Events (0x0000 - 0x007F) */
4389       { 0x0001, "P Online" },
4390       { 0x0002, "P Standby" },
4391       { 0x0005, "P Automatic Rebuild Started" },
4392       { 0x0006, "P Manual Rebuild Started" },
4393       { 0x0007, "P Rebuild Completed" },
4394       { 0x0008, "P Rebuild Cancelled" },
4395       { 0x0009, "P Rebuild Failed for Unknown Reasons" },
4396       { 0x000A, "P Rebuild Failed due to New Physical Device" },
4397       { 0x000B, "P Rebuild Failed due to Logical Drive Failure" },
4398       { 0x000C, "S Offline" },
4399       { 0x000D, "P Found" },
4400       { 0x000E, "P Removed" },
4401       { 0x000F, "P Unconfigured" },
4402       { 0x0010, "P Expand Capacity Started" },
4403       { 0x0011, "P Expand Capacity Completed" },
4404       { 0x0012, "P Expand Capacity Failed" },
4405       { 0x0013, "P Command Timed Out" },
4406       { 0x0014, "P Command Aborted" },
4407       { 0x0015, "P Command Retried" },
4408       { 0x0016, "P Parity Error" },
4409       { 0x0017, "P Soft Error" },
4410       { 0x0018, "P Miscellaneous Error" },
4411       { 0x0019, "P Reset" },
4412       { 0x001A, "P Active Spare Found" },
4413       { 0x001B, "P Warm Spare Found" },
4414       { 0x001C, "S Sense Data Received" },
4415       { 0x001D, "P Initialization Started" },
4416       { 0x001E, "P Initialization Completed" },
4417       { 0x001F, "P Initialization Failed" },
4418       { 0x0020, "P Initialization Cancelled" },
4419       { 0x0021, "P Failed because Write Recovery Failed" },
4420       { 0x0022, "P Failed because SCSI Bus Reset Failed" },
4421       { 0x0023, "P Failed because of Double Check Condition" },
4422       { 0x0024, "P Failed because Device Cannot Be Accessed" },
4423       { 0x0025, "P Failed because of Gross Error on SCSI Processor" },
4424       { 0x0026, "P Failed because of Bad Tag from Device" },
4425       { 0x0027, "P Failed because of Command Timeout" },
4426       { 0x0028, "P Failed because of System Reset" },
4427       { 0x0029, "P Failed because of Busy Status or Parity Error" },
4428       { 0x002A, "P Failed because Host Set Device to Failed State" },
4429       { 0x002B, "P Failed because of Selection Timeout" },
4430       { 0x002C, "P Failed because of SCSI Bus Phase Error" },
4431       { 0x002D, "P Failed because Device Returned Unknown Status" },
4432       { 0x002E, "P Failed because Device Not Ready" },
4433       { 0x002F, "P Failed because Device Not Found at Startup" },
4434       { 0x0030, "P Failed because COD Write Operation Failed" },
4435       { 0x0031, "P Failed because BDT Write Operation Failed" },
4436       { 0x0039, "P Missing at Startup" },
4437       { 0x003A, "P Start Rebuild Failed due to Physical Drive Too Small" },
4438       { 0x003C, "P Temporarily Offline Device Automatically Made Online" },
4439       { 0x003D, "P Standby Rebuild Started" },
4440       /* Logical Device Events (0x0080 - 0x00FF) */
4441       { 0x0080, "M Consistency Check Started" },
4442       { 0x0081, "M Consistency Check Completed" },
4443       { 0x0082, "M Consistency Check Cancelled" },
4444       { 0x0083, "M Consistency Check Completed With Errors" },
4445       { 0x0084, "M Consistency Check Failed due to Logical Drive Failure" },
4446       { 0x0085, "M Consistency Check Failed due to Physical Device Failure" },
4447       { 0x0086, "L Offline" },
4448       { 0x0087, "L Critical" },
4449       { 0x0088, "L Online" },
4450       { 0x0089, "M Automatic Rebuild Started" },
4451       { 0x008A, "M Manual Rebuild Started" },
4452       { 0x008B, "M Rebuild Completed" },
4453       { 0x008C, "M Rebuild Cancelled" },
4454       { 0x008D, "M Rebuild Failed for Unknown Reasons" },
4455       { 0x008E, "M Rebuild Failed due to New Physical Device" },
4456       { 0x008F, "M Rebuild Failed due to Logical Drive Failure" },
4457       { 0x0090, "M Initialization Started" },
4458       { 0x0091, "M Initialization Completed" },
4459       { 0x0092, "M Initialization Cancelled" },
4460       { 0x0093, "M Initialization Failed" },
4461       { 0x0094, "L Found" },
4462       { 0x0095, "L Deleted" },
4463       { 0x0096, "M Expand Capacity Started" },
4464       { 0x0097, "M Expand Capacity Completed" },
4465       { 0x0098, "M Expand Capacity Failed" },
4466       { 0x0099, "L Bad Block Found" },
4467       { 0x009A, "L Size Changed" },
4468       { 0x009B, "L Type Changed" },
4469       { 0x009C, "L Bad Data Block Found" },
4470       { 0x009E, "L Read of Data Block in BDT" },
4471       { 0x009F, "L Write Back Data for Disk Block Lost" },
4472       { 0x00A0, "L Temporarily Offline RAID-5/3 Drive Made Online" },
4473       { 0x00A1, "L Temporarily Offline RAID-6/1/0/7 Drive Made Online" },
4474       { 0x00A2, "L Standby Rebuild Started" },
4475       /* Fault Management Events (0x0100 - 0x017F) */
4476       { 0x0140, "E Fan %d Failed" },
4477       { 0x0141, "E Fan %d OK" },
4478       { 0x0142, "E Fan %d Not Present" },
4479       { 0x0143, "E Power Supply %d Failed" },
4480       { 0x0144, "E Power Supply %d OK" },
4481       { 0x0145, "E Power Supply %d Not Present" },
4482       { 0x0146, "E Temperature Sensor %d Temperature Exceeds Safe Limit" },
4483       { 0x0147, "E Temperature Sensor %d Temperature Exceeds Working Limit" },
4484       { 0x0148, "E Temperature Sensor %d Temperature Normal" },
4485       { 0x0149, "E Temperature Sensor %d Not Present" },
4486       { 0x014A, "E Enclosure Management Unit %d Access Critical" },
4487       { 0x014B, "E Enclosure Management Unit %d Access OK" },
4488       { 0x014C, "E Enclosure Management Unit %d Access Offline" },
4489       /* Controller Events (0x0180 - 0x01FF) */
4490       { 0x0181, "C Cache Write Back Error" },
4491       { 0x0188, "C Battery Backup Unit Found" },
4492       { 0x0189, "C Battery Backup Unit Charge Level Low" },
4493       { 0x018A, "C Battery Backup Unit Charge Level OK" },
4494       { 0x0193, "C Installation Aborted" },
4495       { 0x0195, "C Battery Backup Unit Physically Removed" },
4496       { 0x0196, "C Memory Error During Warm Boot" },
4497       { 0x019E, "C Memory Soft ECC Error Corrected" },
4498       { 0x019F, "C Memory Hard ECC Error Corrected" },
4499       { 0x01A2, "C Battery Backup Unit Failed" },
4500       { 0x01AB, "C Mirror Race Recovery Failed" },
4501       { 0x01AC, "C Mirror Race on Critical Drive" },
4502       /* Controller Internal Processor Events */
4503       { 0x0380, "C Internal Controller Hung" },
4504       { 0x0381, "C Internal Controller Firmware Breakpoint" },
4505       { 0x0390, "C Internal Controller i960 Processor Specific Error" },
4506       { 0x03A0, "C Internal Controller StrongARM Processor Specific Error" },
4507       { 0, "" } };
4508   int EventListIndex = 0, EventCode;
4509   unsigned char EventType, *EventMessage;
4510   if (Event->EventCode == 0x1C &&
4511       RequestSense->SenseKey == DAC960_SenseKey_VendorSpecific &&
4512       (RequestSense->AdditionalSenseCode == 0x80 ||
4513        RequestSense->AdditionalSenseCode == 0x81))
4514     Event->EventCode = ((RequestSense->AdditionalSenseCode - 0x80) << 8) |
4515                        RequestSense->AdditionalSenseCodeQualifier;
4516   while (true)
4517     {
4518       EventCode = EventList[EventListIndex].EventCode;
4519       if (EventCode == Event->EventCode || EventCode == 0) break;
4520       EventListIndex++;
4521     }
4522   EventType = EventList[EventListIndex].EventMessage[0];
4523   EventMessage = &EventList[EventListIndex].EventMessage[2];
4524   if (EventCode == 0)
4525     {
4526       DAC960_Critical("Unknown Controller Event Code %04X\n",
4527                       Controller, Event->EventCode);
4528       return;
4529     }
4530   switch (EventType)
4531     {
4532     case 'P':
4533       DAC960_Critical("Physical Device %d:%d %s\n", Controller,
4534                       Event->Channel, Event->TargetID, EventMessage);
4535       break;
4536     case 'L':
4537       DAC960_Critical("Logical Drive %d (/dev/rd/c%dd%d) %s\n", Controller,
4538                       Event->LogicalUnit, Controller->ControllerNumber,
4539                       Event->LogicalUnit, EventMessage);
4540       break;
4541     case 'M':
4542       DAC960_Progress("Logical Drive %d (/dev/rd/c%dd%d) %s\n", Controller,
4543                       Event->LogicalUnit, Controller->ControllerNumber,
4544                       Event->LogicalUnit, EventMessage);
4545       break;
4546     case 'S':
4547       if (RequestSense->SenseKey == DAC960_SenseKey_NoSense ||
4548           (RequestSense->SenseKey == DAC960_SenseKey_NotReady &&
4549            RequestSense->AdditionalSenseCode == 0x04 &&
4550            (RequestSense->AdditionalSenseCodeQualifier == 0x01 ||
4551             RequestSense->AdditionalSenseCodeQualifier == 0x02)))
4552         break;
4553       DAC960_Critical("Physical Device %d:%d %s\n", Controller,
4554                       Event->Channel, Event->TargetID, EventMessage);
4555       DAC960_Critical("Physical Device %d:%d Request Sense: "
4556                       "Sense Key = %X, ASC = %02X, ASCQ = %02X\n",
4557                       Controller,
4558                       Event->Channel,
4559                       Event->TargetID,
4560                       RequestSense->SenseKey,
4561                       RequestSense->AdditionalSenseCode,
4562                       RequestSense->AdditionalSenseCodeQualifier);
4563       DAC960_Critical("Physical Device %d:%d Request Sense: "
4564                       "Information = %02X%02X%02X%02X "
4565                       "%02X%02X%02X%02X\n",
4566                       Controller,
4567                       Event->Channel,
4568                       Event->TargetID,
4569                       RequestSense->Information[0],
4570                       RequestSense->Information[1],
4571                       RequestSense->Information[2],
4572                       RequestSense->Information[3],
4573                       RequestSense->CommandSpecificInformation[0],
4574                       RequestSense->CommandSpecificInformation[1],
4575                       RequestSense->CommandSpecificInformation[2],
4576                       RequestSense->CommandSpecificInformation[3]);
4577       break;
4578     case 'E':
4579       if (Controller->SuppressEnclosureMessages) break;
4580       sprintf(MessageBuffer, EventMessage, Event->LogicalUnit);
4581       DAC960_Critical("Enclosure %d %s\n", Controller,
4582                       Event->TargetID, MessageBuffer);
4583       break;
4584     case 'C':
4585       DAC960_Critical("Controller %s\n", Controller, EventMessage);
4586       break;
4587     default:
4588       DAC960_Critical("Unknown Controller Event Code %04X\n",
4589                       Controller, Event->EventCode);
4590       break;
4591     }
4592 }
4593
4594
4595 /*
4596   DAC960_V2_ReportProgress prints an appropriate progress message for
4597   Logical Device Long Operations.
4598 */
4599
4600 static void DAC960_V2_ReportProgress(DAC960_Controller_T *Controller,
4601                                      unsigned char *MessageString,
4602                                      unsigned int LogicalDeviceNumber,
4603                                      unsigned long BlocksCompleted,
4604                                      unsigned long LogicalDeviceSize)
4605 {
4606   Controller->EphemeralProgressMessage = true;
4607   DAC960_Progress("%s in Progress: Logical Drive %d (/dev/rd/c%dd%d) "
4608                   "%d%% completed\n", Controller,
4609                   MessageString,
4610                   LogicalDeviceNumber,
4611                   Controller->ControllerNumber,
4612                   LogicalDeviceNumber,
4613                   (100 * (BlocksCompleted >> 7)) / (LogicalDeviceSize >> 7));
4614   Controller->EphemeralProgressMessage = false;
4615 }
4616
4617
4618 /*
4619   DAC960_V2_ProcessCompletedCommand performs completion processing for Command
4620   for DAC960 V2 Firmware Controllers.
4621 */
4622
4623 static void DAC960_V2_ProcessCompletedCommand(DAC960_Command_T *Command)
4624 {
4625   DAC960_Controller_T *Controller = Command->Controller;
4626   DAC960_CommandType_T CommandType = Command->CommandType;
4627   DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox;
4628   DAC960_V2_IOCTL_Opcode_T CommandOpcode = CommandMailbox->Common.IOCTL_Opcode;
4629   DAC960_V2_CommandStatus_T CommandStatus = Command->V2.CommandStatus;
4630
4631   if (CommandType == DAC960_ReadCommand ||
4632       CommandType == DAC960_WriteCommand)
4633     {
4634
4635 #ifdef FORCE_RETRY_DEBUG
4636       CommandStatus = DAC960_V2_AbormalCompletion;
4637 #endif
4638       Command->V2.RequestSense->SenseKey = DAC960_SenseKey_MediumError;
4639
4640       if (CommandStatus == DAC960_V2_NormalCompletion) {
4641
4642                 if (!DAC960_ProcessCompletedRequest(Command, true))
4643                         BUG();
4644
4645       } else if (Command->V2.RequestSense->SenseKey == DAC960_SenseKey_MediumError)
4646         {
4647           /*
4648            * break the command down into pieces and resubmit each
4649            * piece, hoping that some of them will succeed.
4650            */
4651            DAC960_queue_partial_rw(Command);
4652            return;
4653         }
4654       else
4655         {
4656           if (Command->V2.RequestSense->SenseKey != DAC960_SenseKey_NotReady)
4657             DAC960_V2_ReadWriteError(Command);
4658           /*
4659             Perform completion processing for all buffers in this I/O Request.
4660           */
4661           (void)DAC960_ProcessCompletedRequest(Command, false);
4662         }
4663     }
4664   else if (CommandType == DAC960_ReadRetryCommand ||
4665            CommandType == DAC960_WriteRetryCommand)
4666     {
4667       bool normal_completion;
4668
4669 #ifdef FORCE_RETRY_FAILURE_DEBUG
4670       static int retry_count = 1;
4671 #endif
4672       /*
4673         Perform completion processing for the portion that was
4674         retried, and submit the next portion, if any.
4675       */
4676       normal_completion = true;
4677       if (CommandStatus != DAC960_V2_NormalCompletion) {
4678         normal_completion = false;
4679         if (Command->V2.RequestSense->SenseKey != DAC960_SenseKey_NotReady)
4680             DAC960_V2_ReadWriteError(Command);
4681       }
4682
4683 #ifdef FORCE_RETRY_FAILURE_DEBUG
4684       if (!(++retry_count % 10000)) {
4685               printk("V2 error retry failure test\n");
4686               normal_completion = false;
4687               DAC960_V2_ReadWriteError(Command);
4688       }
4689 #endif
4690
4691       if (!DAC960_ProcessCompletedRequest(Command, normal_completion)) {
4692                 DAC960_queue_partial_rw(Command);
4693                 return;
4694       }
4695     }
4696   else if (CommandType == DAC960_MonitoringCommand)
4697     {
4698       if (Controller->ShutdownMonitoringTimer)
4699               return;
4700       if (CommandOpcode == DAC960_V2_GetControllerInfo)
4701         {
4702           DAC960_V2_ControllerInfo_T *NewControllerInfo =
4703             Controller->V2.NewControllerInformation;
4704           DAC960_V2_ControllerInfo_T *ControllerInfo =
4705             &Controller->V2.ControllerInformation;
4706           Controller->LogicalDriveCount =
4707             NewControllerInfo->LogicalDevicesPresent;
4708           Controller->V2.NeedLogicalDeviceInformation = true;
4709           Controller->V2.NeedPhysicalDeviceInformation = true;
4710           Controller->V2.StartLogicalDeviceInformationScan = true;
4711           Controller->V2.StartPhysicalDeviceInformationScan = true;
4712           Controller->MonitoringAlertMode =
4713             (NewControllerInfo->LogicalDevicesCritical > 0 ||
4714              NewControllerInfo->LogicalDevicesOffline > 0 ||
4715              NewControllerInfo->PhysicalDisksCritical > 0 ||
4716              NewControllerInfo->PhysicalDisksOffline > 0);
4717           memcpy(ControllerInfo, NewControllerInfo,
4718                  sizeof(DAC960_V2_ControllerInfo_T));
4719         }
4720       else if (CommandOpcode == DAC960_V2_GetEvent)
4721         {
4722           if (CommandStatus == DAC960_V2_NormalCompletion) {
4723             DAC960_V2_ReportEvent(Controller, Controller->V2.Event);
4724           }
4725           Controller->V2.NextEventSequenceNumber++;
4726         }
4727       else if (CommandOpcode == DAC960_V2_GetPhysicalDeviceInfoValid &&
4728                CommandStatus == DAC960_V2_NormalCompletion)
4729         {
4730           DAC960_V2_PhysicalDeviceInfo_T *NewPhysicalDeviceInfo =
4731             Controller->V2.NewPhysicalDeviceInformation;
4732           unsigned int PhysicalDeviceIndex = Controller->V2.PhysicalDeviceIndex;
4733           DAC960_V2_PhysicalDeviceInfo_T *PhysicalDeviceInfo =
4734             Controller->V2.PhysicalDeviceInformation[PhysicalDeviceIndex];
4735           DAC960_SCSI_Inquiry_UnitSerialNumber_T *InquiryUnitSerialNumber =
4736             Controller->V2.InquiryUnitSerialNumber[PhysicalDeviceIndex];
4737           unsigned int DeviceIndex;
4738           while (PhysicalDeviceInfo != NULL &&
4739                  (NewPhysicalDeviceInfo->Channel >
4740                   PhysicalDeviceInfo->Channel ||
4741                   (NewPhysicalDeviceInfo->Channel ==
4742                    PhysicalDeviceInfo->Channel &&
4743                    (NewPhysicalDeviceInfo->TargetID >
4744                     PhysicalDeviceInfo->TargetID ||
4745                    (NewPhysicalDeviceInfo->TargetID ==
4746                     PhysicalDeviceInfo->TargetID &&
4747                     NewPhysicalDeviceInfo->LogicalUnit >
4748                     PhysicalDeviceInfo->LogicalUnit)))))
4749             {
4750               DAC960_Critical("Physical Device %d:%d No Longer Exists\n",
4751                               Controller,
4752                               PhysicalDeviceInfo->Channel,
4753                               PhysicalDeviceInfo->TargetID);
4754               Controller->V2.PhysicalDeviceInformation
4755                              [PhysicalDeviceIndex] = NULL;
4756               Controller->V2.InquiryUnitSerialNumber
4757                              [PhysicalDeviceIndex] = NULL;
4758               kfree(PhysicalDeviceInfo);
4759               kfree(InquiryUnitSerialNumber);
4760               for (DeviceIndex = PhysicalDeviceIndex;
4761                    DeviceIndex < DAC960_V2_MaxPhysicalDevices - 1;
4762                    DeviceIndex++)
4763                 {
4764                   Controller->V2.PhysicalDeviceInformation[DeviceIndex] =
4765                     Controller->V2.PhysicalDeviceInformation[DeviceIndex+1];
4766                   Controller->V2.InquiryUnitSerialNumber[DeviceIndex] =
4767                     Controller->V2.InquiryUnitSerialNumber[DeviceIndex+1];
4768                 }
4769               Controller->V2.PhysicalDeviceInformation
4770                              [DAC960_V2_MaxPhysicalDevices-1] = NULL;
4771               Controller->V2.InquiryUnitSerialNumber
4772                              [DAC960_V2_MaxPhysicalDevices-1] = NULL;
4773               PhysicalDeviceInfo =
4774                 Controller->V2.PhysicalDeviceInformation[PhysicalDeviceIndex];
4775               InquiryUnitSerialNumber =
4776                 Controller->V2.InquiryUnitSerialNumber[PhysicalDeviceIndex];
4777             }
4778           if (PhysicalDeviceInfo == NULL ||
4779               (NewPhysicalDeviceInfo->Channel !=
4780                PhysicalDeviceInfo->Channel) ||
4781               (NewPhysicalDeviceInfo->TargetID !=
4782                PhysicalDeviceInfo->TargetID) ||
4783               (NewPhysicalDeviceInfo->LogicalUnit !=
4784                PhysicalDeviceInfo->LogicalUnit))
4785             {
4786               PhysicalDeviceInfo =
4787                 kmalloc(sizeof(DAC960_V2_PhysicalDeviceInfo_T), GFP_ATOMIC);
4788               InquiryUnitSerialNumber =
4789                   kmalloc(sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T),
4790                           GFP_ATOMIC);
4791               if (InquiryUnitSerialNumber == NULL ||
4792                   PhysicalDeviceInfo == NULL)
4793                 {
4794                   kfree(InquiryUnitSerialNumber);
4795                   InquiryUnitSerialNumber = NULL;
4796                   kfree(PhysicalDeviceInfo);
4797                   PhysicalDeviceInfo = NULL;
4798                 }
4799               DAC960_Critical("Physical Device %d:%d Now Exists%s\n",
4800                               Controller,
4801                               NewPhysicalDeviceInfo->Channel,
4802                               NewPhysicalDeviceInfo->TargetID,
4803                               (PhysicalDeviceInfo != NULL
4804                                ? "" : " - Allocation Failed"));
4805               if (PhysicalDeviceInfo != NULL)
4806                 {
4807                   memset(PhysicalDeviceInfo, 0,
4808                          sizeof(DAC960_V2_PhysicalDeviceInfo_T));
4809                   PhysicalDeviceInfo->PhysicalDeviceState =
4810                     DAC960_V2_Device_InvalidState;
4811                   memset(InquiryUnitSerialNumber, 0,
4812                          sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T));
4813                   InquiryUnitSerialNumber->PeripheralDeviceType = 0x1F;
4814                   for (DeviceIndex = DAC960_V2_MaxPhysicalDevices - 1;
4815                        DeviceIndex > PhysicalDeviceIndex;
4816                        DeviceIndex--)
4817                     {
4818                       Controller->V2.PhysicalDeviceInformation[DeviceIndex] =
4819                         Controller->V2.PhysicalDeviceInformation[DeviceIndex-1];
4820                       Controller->V2.InquiryUnitSerialNumber[DeviceIndex] =
4821                         Controller->V2.InquiryUnitSerialNumber[DeviceIndex-1];
4822                     }
4823                   Controller->V2.PhysicalDeviceInformation
4824                                  [PhysicalDeviceIndex] =
4825                     PhysicalDeviceInfo;
4826                   Controller->V2.InquiryUnitSerialNumber
4827                                  [PhysicalDeviceIndex] =
4828                     InquiryUnitSerialNumber;
4829                   Controller->V2.NeedDeviceSerialNumberInformation = true;
4830                 }
4831             }
4832           if (PhysicalDeviceInfo != NULL)
4833             {
4834               if (NewPhysicalDeviceInfo->PhysicalDeviceState !=
4835                   PhysicalDeviceInfo->PhysicalDeviceState)
4836                 DAC960_Critical(
4837                   "Physical Device %d:%d is now %s\n", Controller,
4838                   NewPhysicalDeviceInfo->Channel,
4839                   NewPhysicalDeviceInfo->TargetID,
4840                   (NewPhysicalDeviceInfo->PhysicalDeviceState
4841                    == DAC960_V2_Device_Online
4842                    ? "ONLINE"
4843                    : NewPhysicalDeviceInfo->PhysicalDeviceState
4844                      == DAC960_V2_Device_Rebuild
4845                      ? "REBUILD"
4846                      : NewPhysicalDeviceInfo->PhysicalDeviceState
4847                        == DAC960_V2_Device_Missing
4848                        ? "MISSING"
4849                        : NewPhysicalDeviceInfo->PhysicalDeviceState
4850                          == DAC960_V2_Device_Critical
4851                          ? "CRITICAL"
4852                          : NewPhysicalDeviceInfo->PhysicalDeviceState
4853                            == DAC960_V2_Device_Dead
4854                            ? "DEAD"
4855                            : NewPhysicalDeviceInfo->PhysicalDeviceState
4856                              == DAC960_V2_Device_SuspectedDead
4857                              ? "SUSPECTED-DEAD"
4858                              : NewPhysicalDeviceInfo->PhysicalDeviceState
4859                                == DAC960_V2_Device_CommandedOffline
4860                                ? "COMMANDED-OFFLINE"
4861                                : NewPhysicalDeviceInfo->PhysicalDeviceState
4862                                  == DAC960_V2_Device_Standby
4863                                  ? "STANDBY" : "UNKNOWN"));
4864               if ((NewPhysicalDeviceInfo->ParityErrors !=
4865                    PhysicalDeviceInfo->ParityErrors) ||
4866                   (NewPhysicalDeviceInfo->SoftErrors !=
4867                    PhysicalDeviceInfo->SoftErrors) ||
4868                   (NewPhysicalDeviceInfo->HardErrors !=
4869                    PhysicalDeviceInfo->HardErrors) ||
4870                   (NewPhysicalDeviceInfo->MiscellaneousErrors !=
4871                    PhysicalDeviceInfo->MiscellaneousErrors) ||
4872                   (NewPhysicalDeviceInfo->CommandTimeouts !=
4873                    PhysicalDeviceInfo->CommandTimeouts) ||
4874                   (NewPhysicalDeviceInfo->Retries !=
4875                    PhysicalDeviceInfo->Retries) ||
4876                   (NewPhysicalDeviceInfo->Aborts !=
4877                    PhysicalDeviceInfo->Aborts) ||
4878                   (NewPhysicalDeviceInfo->PredictedFailuresDetected !=
4879                    PhysicalDeviceInfo->PredictedFailuresDetected))
4880                 {
4881                   DAC960_Critical("Physical Device %d:%d Errors: "
4882                                   "Parity = %d, Soft = %d, "
4883                                   "Hard = %d, Misc = %d\n",
4884                                   Controller,
4885                                   NewPhysicalDeviceInfo->Channel,
4886                                   NewPhysicalDeviceInfo->TargetID,
4887                                   NewPhysicalDeviceInfo->ParityErrors,
4888                                   NewPhysicalDeviceInfo->SoftErrors,
4889                                   NewPhysicalDeviceInfo->HardErrors,
4890                                   NewPhysicalDeviceInfo->MiscellaneousErrors);
4891                   DAC960_Critical("Physical Device %d:%d Errors: "
4892                                   "Timeouts = %d, Retries = %d, "
4893                                   "Aborts = %d, Predicted = %d\n",
4894                                   Controller,
4895                                   NewPhysicalDeviceInfo->Channel,
4896                                   NewPhysicalDeviceInfo->TargetID,
4897                                   NewPhysicalDeviceInfo->CommandTimeouts,
4898                                   NewPhysicalDeviceInfo->Retries,
4899                                   NewPhysicalDeviceInfo->Aborts,
4900                                   NewPhysicalDeviceInfo
4901                                   ->PredictedFailuresDetected);
4902                 }
4903               if ((PhysicalDeviceInfo->PhysicalDeviceState
4904                    == DAC960_V2_Device_Dead ||
4905                    PhysicalDeviceInfo->PhysicalDeviceState
4906                    == DAC960_V2_Device_InvalidState) &&
4907                   NewPhysicalDeviceInfo->PhysicalDeviceState
4908                   != DAC960_V2_Device_Dead)
4909                 Controller->V2.NeedDeviceSerialNumberInformation = true;
4910               memcpy(PhysicalDeviceInfo, NewPhysicalDeviceInfo,
4911                      sizeof(DAC960_V2_PhysicalDeviceInfo_T));
4912             }
4913           NewPhysicalDeviceInfo->LogicalUnit++;
4914           Controller->V2.PhysicalDeviceIndex++;
4915         }
4916       else if (CommandOpcode == DAC960_V2_GetPhysicalDeviceInfoValid)
4917         {
4918           unsigned int DeviceIndex;
4919           for (DeviceIndex = Controller->V2.PhysicalDeviceIndex;
4920                DeviceIndex < DAC960_V2_MaxPhysicalDevices;
4921                DeviceIndex++)
4922             {
4923               DAC960_V2_PhysicalDeviceInfo_T *PhysicalDeviceInfo =
4924                 Controller->V2.PhysicalDeviceInformation[DeviceIndex];
4925               DAC960_SCSI_Inquiry_UnitSerialNumber_T *InquiryUnitSerialNumber =
4926                 Controller->V2.InquiryUnitSerialNumber[DeviceIndex];
4927               if (PhysicalDeviceInfo == NULL) break;
4928               DAC960_Critical("Physical Device %d:%d No Longer Exists\n",
4929                               Controller,
4930                               PhysicalDeviceInfo->Channel,
4931                               PhysicalDeviceInfo->TargetID);
4932               Controller->V2.PhysicalDeviceInformation[DeviceIndex] = NULL;
4933               Controller->V2.InquiryUnitSerialNumber[DeviceIndex] = NULL;
4934               kfree(PhysicalDeviceInfo);
4935               kfree(InquiryUnitSerialNumber);
4936             }
4937           Controller->V2.NeedPhysicalDeviceInformation = false;
4938         }
4939       else if (CommandOpcode == DAC960_V2_GetLogicalDeviceInfoValid &&
4940                CommandStatus == DAC960_V2_NormalCompletion)
4941         {
4942           DAC960_V2_LogicalDeviceInfo_T *NewLogicalDeviceInfo =
4943             Controller->V2.NewLogicalDeviceInformation;
4944           unsigned short LogicalDeviceNumber =
4945             NewLogicalDeviceInfo->LogicalDeviceNumber;
4946           DAC960_V2_LogicalDeviceInfo_T *LogicalDeviceInfo =
4947             Controller->V2.LogicalDeviceInformation[LogicalDeviceNumber];
4948           if (LogicalDeviceInfo == NULL)
4949             {
4950               DAC960_V2_PhysicalDevice_T PhysicalDevice;
4951               PhysicalDevice.Controller = 0;
4952               PhysicalDevice.Channel = NewLogicalDeviceInfo->Channel;
4953               PhysicalDevice.TargetID = NewLogicalDeviceInfo->TargetID;
4954               PhysicalDevice.LogicalUnit = NewLogicalDeviceInfo->LogicalUnit;
4955               Controller->V2.LogicalDriveToVirtualDevice[LogicalDeviceNumber] =
4956                 PhysicalDevice;
4957               LogicalDeviceInfo = kmalloc(sizeof(DAC960_V2_LogicalDeviceInfo_T),
4958                                           GFP_ATOMIC);
4959               Controller->V2.LogicalDeviceInformation[LogicalDeviceNumber] =
4960                 LogicalDeviceInfo;
4961               DAC960_Critical("Logical Drive %d (/dev/rd/c%dd%d) "
4962                               "Now Exists%s\n", Controller,
4963                               LogicalDeviceNumber,
4964                               Controller->ControllerNumber,
4965                               LogicalDeviceNumber,
4966                               (LogicalDeviceInfo != NULL
4967                                ? "" : " - Allocation Failed"));
4968               if (LogicalDeviceInfo != NULL)
4969                 {
4970                   memset(LogicalDeviceInfo, 0,
4971                          sizeof(DAC960_V2_LogicalDeviceInfo_T));
4972                   DAC960_ComputeGenericDiskInfo(Controller);
4973                 }
4974             }
4975           if (LogicalDeviceInfo != NULL)
4976             {
4977               unsigned long LogicalDeviceSize =
4978                 NewLogicalDeviceInfo->ConfigurableDeviceSize;
4979               if (NewLogicalDeviceInfo->LogicalDeviceState !=
4980                   LogicalDeviceInfo->LogicalDeviceState)
4981                 DAC960_Critical("Logical Drive %d (/dev/rd/c%dd%d) "
4982                                 "is now %s\n", Controller,
4983                                 LogicalDeviceNumber,
4984                                 Controller->ControllerNumber,
4985                                 LogicalDeviceNumber,
4986                                 (NewLogicalDeviceInfo->LogicalDeviceState
4987                                  == DAC960_V2_LogicalDevice_Online
4988                                  ? "ONLINE"
4989                                  : NewLogicalDeviceInfo->LogicalDeviceState
4990                                    == DAC960_V2_LogicalDevice_Critical
4991                                    ? "CRITICAL" : "OFFLINE"));
4992               if ((NewLogicalDeviceInfo->SoftErrors !=
4993                    LogicalDeviceInfo->SoftErrors) ||
4994                   (NewLogicalDeviceInfo->CommandsFailed !=
4995                    LogicalDeviceInfo->CommandsFailed) ||
4996                   (NewLogicalDeviceInfo->DeferredWriteErrors !=
4997                    LogicalDeviceInfo->DeferredWriteErrors))
4998                 DAC960_Critical("Logical Drive %d (/dev/rd/c%dd%d) Errors: "
4999                                 "Soft = %d, Failed = %d, Deferred Write = %d\n",
5000                                 Controller, LogicalDeviceNumber,
5001                                 Controller->ControllerNumber,
5002                                 LogicalDeviceNumber,
5003                                 NewLogicalDeviceInfo->SoftErrors,
5004                                 NewLogicalDeviceInfo->CommandsFailed,
5005                                 NewLogicalDeviceInfo->DeferredWriteErrors);
5006               if (NewLogicalDeviceInfo->ConsistencyCheckInProgress)
5007                 DAC960_V2_ReportProgress(Controller,
5008                                          "Consistency Check",
5009                                          LogicalDeviceNumber,
5010                                          NewLogicalDeviceInfo
5011                                          ->ConsistencyCheckBlockNumber,
5012                                          LogicalDeviceSize);
5013               else if (NewLogicalDeviceInfo->RebuildInProgress)
5014                 DAC960_V2_ReportProgress(Controller,
5015                                          "Rebuild",
5016                                          LogicalDeviceNumber,
5017                                          NewLogicalDeviceInfo
5018                                          ->RebuildBlockNumber,
5019                                          LogicalDeviceSize);
5020               else if (NewLogicalDeviceInfo->BackgroundInitializationInProgress)
5021                 DAC960_V2_ReportProgress(Controller,
5022                                          "Background Initialization",
5023                                          LogicalDeviceNumber,
5024                                          NewLogicalDeviceInfo
5025                                          ->BackgroundInitializationBlockNumber,
5026                                          LogicalDeviceSize);
5027               else if (NewLogicalDeviceInfo->ForegroundInitializationInProgress)
5028                 DAC960_V2_ReportProgress(Controller,
5029                                          "Foreground Initialization",
5030                                          LogicalDeviceNumber,
5031                                          NewLogicalDeviceInfo
5032                                          ->ForegroundInitializationBlockNumber,
5033                                          LogicalDeviceSize);
5034               else if (NewLogicalDeviceInfo->DataMigrationInProgress)
5035                 DAC960_V2_ReportProgress(Controller,
5036                                          "Data Migration",
5037                                          LogicalDeviceNumber,
5038                                          NewLogicalDeviceInfo
5039                                          ->DataMigrationBlockNumber,
5040                                          LogicalDeviceSize);
5041               else if (NewLogicalDeviceInfo->PatrolOperationInProgress)
5042                 DAC960_V2_ReportProgress(Controller,
5043                                          "Patrol Operation",
5044                                          LogicalDeviceNumber,
5045                                          NewLogicalDeviceInfo
5046                                          ->PatrolOperationBlockNumber,
5047                                          LogicalDeviceSize);
5048               if (LogicalDeviceInfo->BackgroundInitializationInProgress &&
5049                   !NewLogicalDeviceInfo->BackgroundInitializationInProgress)
5050                 DAC960_Progress("Logical Drive %d (/dev/rd/c%dd%d) "
5051                                 "Background Initialization %s\n",
5052                                 Controller,
5053                                 LogicalDeviceNumber,
5054                                 Controller->ControllerNumber,
5055                                 LogicalDeviceNumber,
5056                                 (NewLogicalDeviceInfo->LogicalDeviceControl
5057                                                       .LogicalDeviceInitialized
5058                                  ? "Completed" : "Failed"));
5059               memcpy(LogicalDeviceInfo, NewLogicalDeviceInfo,
5060                      sizeof(DAC960_V2_LogicalDeviceInfo_T));
5061             }
5062           Controller->V2.LogicalDriveFoundDuringScan
5063                          [LogicalDeviceNumber] = true;
5064           NewLogicalDeviceInfo->LogicalDeviceNumber++;
5065         }
5066       else if (CommandOpcode == DAC960_V2_GetLogicalDeviceInfoValid)
5067         {
5068           int LogicalDriveNumber;
5069           for (LogicalDriveNumber = 0;
5070                LogicalDriveNumber < DAC960_MaxLogicalDrives;
5071                LogicalDriveNumber++)
5072             {
5073               DAC960_V2_LogicalDeviceInfo_T *LogicalDeviceInfo =
5074                 Controller->V2.LogicalDeviceInformation[LogicalDriveNumber];
5075               if (LogicalDeviceInfo == NULL ||
5076                   Controller->V2.LogicalDriveFoundDuringScan
5077                                  [LogicalDriveNumber])
5078                 continue;
5079               DAC960_Critical("Logical Drive %d (/dev/rd/c%dd%d) "
5080                               "No Longer Exists\n", Controller,
5081                               LogicalDriveNumber,
5082                               Controller->ControllerNumber,
5083                               LogicalDriveNumber);
5084               Controller->V2.LogicalDeviceInformation
5085                              [LogicalDriveNumber] = NULL;
5086               kfree(LogicalDeviceInfo);
5087               Controller->LogicalDriveInitiallyAccessible
5088                           [LogicalDriveNumber] = false;
5089               DAC960_ComputeGenericDiskInfo(Controller);
5090             }
5091           Controller->V2.NeedLogicalDeviceInformation = false;
5092         }
5093       else if (CommandOpcode == DAC960_V2_SCSI_10_Passthru)
5094         {
5095             DAC960_SCSI_Inquiry_UnitSerialNumber_T *InquiryUnitSerialNumber =
5096                 Controller->V2.InquiryUnitSerialNumber[Controller->V2.PhysicalDeviceIndex - 1];
5097
5098             if (CommandStatus != DAC960_V2_NormalCompletion) {
5099                 memset(InquiryUnitSerialNumber,
5100                         0, sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T));
5101                 InquiryUnitSerialNumber->PeripheralDeviceType = 0x1F;
5102             } else
5103                 memcpy(InquiryUnitSerialNumber,
5104                         Controller->V2.NewInquiryUnitSerialNumber,
5105                         sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T));
5106
5107              Controller->V2.NeedDeviceSerialNumberInformation = false;
5108         }
5109
5110       if (Controller->V2.HealthStatusBuffer->NextEventSequenceNumber
5111           - Controller->V2.NextEventSequenceNumber > 0)
5112         {
5113           CommandMailbox->GetEvent.CommandOpcode = DAC960_V2_IOCTL;
5114           CommandMailbox->GetEvent.DataTransferSize = sizeof(DAC960_V2_Event_T);
5115           CommandMailbox->GetEvent.EventSequenceNumberHigh16 =
5116             Controller->V2.NextEventSequenceNumber >> 16;
5117           CommandMailbox->GetEvent.ControllerNumber = 0;
5118           CommandMailbox->GetEvent.IOCTL_Opcode =
5119             DAC960_V2_GetEvent;
5120           CommandMailbox->GetEvent.EventSequenceNumberLow16 =
5121             Controller->V2.NextEventSequenceNumber & 0xFFFF;
5122           CommandMailbox->GetEvent.DataTransferMemoryAddress
5123                                   .ScatterGatherSegments[0]
5124                                   .SegmentDataPointer =
5125             Controller->V2.EventDMA;
5126           CommandMailbox->GetEvent.DataTransferMemoryAddress
5127                                   .ScatterGatherSegments[0]
5128                                   .SegmentByteCount =
5129             CommandMailbox->GetEvent.DataTransferSize;
5130           DAC960_QueueCommand(Command);
5131           return;
5132         }
5133       if (Controller->V2.NeedPhysicalDeviceInformation)
5134         {
5135           if (Controller->V2.NeedDeviceSerialNumberInformation)
5136             {
5137               DAC960_SCSI_Inquiry_UnitSerialNumber_T *InquiryUnitSerialNumber =
5138                 Controller->V2.NewInquiryUnitSerialNumber;
5139               InquiryUnitSerialNumber->PeripheralDeviceType = 0x1F;
5140
5141               DAC960_V2_ConstructNewUnitSerialNumber(Controller, CommandMailbox,
5142                         Controller->V2.NewPhysicalDeviceInformation->Channel,
5143                         Controller->V2.NewPhysicalDeviceInformation->TargetID,
5144                 Controller->V2.NewPhysicalDeviceInformation->LogicalUnit - 1);
5145
5146
5147               DAC960_QueueCommand(Command);
5148               return;
5149             }
5150           if (Controller->V2.StartPhysicalDeviceInformationScan)
5151             {
5152               Controller->V2.PhysicalDeviceIndex = 0;
5153               Controller->V2.NewPhysicalDeviceInformation->Channel = 0;
5154               Controller->V2.NewPhysicalDeviceInformation->TargetID = 0;
5155               Controller->V2.NewPhysicalDeviceInformation->LogicalUnit = 0;
5156               Controller->V2.StartPhysicalDeviceInformationScan = false;
5157             }
5158           CommandMailbox->PhysicalDeviceInfo.CommandOpcode = DAC960_V2_IOCTL;
5159           CommandMailbox->PhysicalDeviceInfo.DataTransferSize =
5160             sizeof(DAC960_V2_PhysicalDeviceInfo_T);
5161           CommandMailbox->PhysicalDeviceInfo.PhysicalDevice.LogicalUnit =
5162             Controller->V2.NewPhysicalDeviceInformation->LogicalUnit;
5163           CommandMailbox->PhysicalDeviceInfo.PhysicalDevice.TargetID =
5164             Controller->V2.NewPhysicalDeviceInformation->TargetID;
5165           CommandMailbox->PhysicalDeviceInfo.PhysicalDevice.Channel =
5166             Controller->V2.NewPhysicalDeviceInformation->Channel;
5167           CommandMailbox->PhysicalDeviceInfo.IOCTL_Opcode =
5168             DAC960_V2_GetPhysicalDeviceInfoValid;
5169           CommandMailbox->PhysicalDeviceInfo.DataTransferMemoryAddress
5170                                             .ScatterGatherSegments[0]
5171                                             .SegmentDataPointer =
5172             Controller->V2.NewPhysicalDeviceInformationDMA;
5173           CommandMailbox->PhysicalDeviceInfo.DataTransferMemoryAddress
5174                                             .ScatterGatherSegments[0]
5175                                             .SegmentByteCount =
5176             CommandMailbox->PhysicalDeviceInfo.DataTransferSize;
5177           DAC960_QueueCommand(Command);
5178           return;
5179         }
5180       if (Controller->V2.NeedLogicalDeviceInformation)
5181         {
5182           if (Controller->V2.StartLogicalDeviceInformationScan)
5183             {
5184               int LogicalDriveNumber;
5185               for (LogicalDriveNumber = 0;
5186                    LogicalDriveNumber < DAC960_MaxLogicalDrives;
5187                    LogicalDriveNumber++)
5188                 Controller->V2.LogicalDriveFoundDuringScan
5189                                [LogicalDriveNumber] = false;
5190               Controller->V2.NewLogicalDeviceInformation->LogicalDeviceNumber = 0;
5191               Controller->V2.StartLogicalDeviceInformationScan = false;
5192             }
5193           CommandMailbox->LogicalDeviceInfo.CommandOpcode = DAC960_V2_IOCTL;
5194           CommandMailbox->LogicalDeviceInfo.DataTransferSize =
5195             sizeof(DAC960_V2_LogicalDeviceInfo_T);
5196           CommandMailbox->LogicalDeviceInfo.LogicalDevice.LogicalDeviceNumber =
5197             Controller->V2.NewLogicalDeviceInformation->LogicalDeviceNumber;
5198           CommandMailbox->LogicalDeviceInfo.IOCTL_Opcode =
5199             DAC960_V2_GetLogicalDeviceInfoValid;
5200           CommandMailbox->LogicalDeviceInfo.DataTransferMemoryAddress
5201                                            .ScatterGatherSegments[0]
5202                                            .SegmentDataPointer =
5203             Controller->V2.NewLogicalDeviceInformationDMA;
5204           CommandMailbox->LogicalDeviceInfo.DataTransferMemoryAddress
5205                                            .ScatterGatherSegments[0]
5206                                            .SegmentByteCount =
5207             CommandMailbox->LogicalDeviceInfo.DataTransferSize;
5208           DAC960_QueueCommand(Command);
5209           return;
5210         }
5211       Controller->MonitoringTimerCount++;
5212       Controller->MonitoringTimer.expires =
5213         jiffies + DAC960_HealthStatusMonitoringInterval;
5214         add_timer(&Controller->MonitoringTimer);
5215     }
5216   if (CommandType == DAC960_ImmediateCommand)
5217     {
5218       complete(Command->Completion);
5219       Command->Completion = NULL;
5220       return;
5221     }
5222   if (CommandType == DAC960_QueuedCommand)
5223     {
5224       DAC960_V2_KernelCommand_T *KernelCommand = Command->V2.KernelCommand;
5225       KernelCommand->CommandStatus = CommandStatus;
5226       KernelCommand->RequestSenseLength = Command->V2.RequestSenseLength;
5227       KernelCommand->DataTransferLength = Command->V2.DataTransferResidue;
5228       Command->V2.KernelCommand = NULL;
5229       DAC960_DeallocateCommand(Command);
5230       KernelCommand->CompletionFunction(KernelCommand);
5231       return;
5232     }
5233   /*
5234     Queue a Status Monitoring Command to the Controller using the just
5235     completed Command if one was deferred previously due to lack of a
5236     free Command when the Monitoring Timer Function was called.
5237   */
5238   if (Controller->MonitoringCommandDeferred)
5239     {
5240       Controller->MonitoringCommandDeferred = false;
5241       DAC960_V2_QueueMonitoringCommand(Command);
5242       return;
5243     }
5244   /*
5245     Deallocate the Command.
5246   */
5247   DAC960_DeallocateCommand(Command);
5248   /*
5249     Wake up any processes waiting on a free Command.
5250   */
5251   wake_up(&Controller->CommandWaitQueue);
5252 }
5253
5254 /*
5255   DAC960_GEM_InterruptHandler handles hardware interrupts from DAC960 GEM Series
5256   Controllers.
5257 */
5258
5259 static irqreturn_t DAC960_GEM_InterruptHandler(int IRQ_Channel,
5260                                        void *DeviceIdentifier)
5261 {
5262   DAC960_Controller_T *Controller = DeviceIdentifier;
5263   void __iomem *ControllerBaseAddress = Controller->BaseAddress;
5264   DAC960_V2_StatusMailbox_T *NextStatusMailbox;
5265   unsigned long flags;
5266
5267   spin_lock_irqsave(&Controller->queue_lock, flags);
5268   DAC960_GEM_AcknowledgeInterrupt(ControllerBaseAddress);
5269   NextStatusMailbox = Controller->V2.NextStatusMailbox;
5270   while (NextStatusMailbox->Fields.CommandIdentifier > 0)
5271     {
5272        DAC960_V2_CommandIdentifier_T CommandIdentifier =
5273            NextStatusMailbox->Fields.CommandIdentifier;
5274        DAC960_Command_T *Command = Controller->Commands[CommandIdentifier-1];
5275        Command->V2.CommandStatus = NextStatusMailbox->Fields.CommandStatus;
5276        Command->V2.RequestSenseLength =
5277            NextStatusMailbox->Fields.RequestSenseLength;
5278        Command->V2.DataTransferResidue =
5279            NextStatusMailbox->Fields.DataTransferResidue;
5280        NextStatusMailbox->Words[0] = 0;
5281        if (++NextStatusMailbox > Controller->V2.LastStatusMailbox)
5282            NextStatusMailbox = Controller->V2.FirstStatusMailbox;
5283        DAC960_V2_ProcessCompletedCommand(Command);
5284     }
5285   Controller->V2.NextStatusMailbox = NextStatusMailbox;
5286   /*
5287     Attempt to remove additional I/O Requests from the Controller's
5288     I/O Request Queue and queue them to the Controller.
5289   */
5290   DAC960_ProcessRequest(Controller);
5291   spin_unlock_irqrestore(&Controller->queue_lock, flags);
5292   return IRQ_HANDLED;
5293 }
5294
5295 /*
5296   DAC960_BA_InterruptHandler handles hardware interrupts from DAC960 BA Series
5297   Controllers.
5298 */
5299
5300 static irqreturn_t DAC960_BA_InterruptHandler(int IRQ_Channel,
5301                                        void *DeviceIdentifier)
5302 {
5303   DAC960_Controller_T *Controller = DeviceIdentifier;
5304   void __iomem *ControllerBaseAddress = Controller->BaseAddress;
5305   DAC960_V2_StatusMailbox_T *NextStatusMailbox;
5306   unsigned long flags;
5307
5308   spin_lock_irqsave(&Controller->queue_lock, flags);
5309   DAC960_BA_AcknowledgeInterrupt(ControllerBaseAddress);
5310   NextStatusMailbox = Controller->V2.NextStatusMailbox;
5311   while (NextStatusMailbox->Fields.CommandIdentifier > 0)
5312     {
5313       DAC960_V2_CommandIdentifier_T CommandIdentifier =
5314         NextStatusMailbox->Fields.CommandIdentifier;
5315       DAC960_Command_T *Command = Controller->Commands[CommandIdentifier-1];
5316       Command->V2.CommandStatus = NextStatusMailbox->Fields.CommandStatus;
5317       Command->V2.RequestSenseLength =
5318         NextStatusMailbox->Fields.RequestSenseLength;
5319       Command->V2.DataTransferResidue =
5320         NextStatusMailbox->Fields.DataTransferResidue;
5321       NextStatusMailbox->Words[0] = 0;
5322       if (++NextStatusMailbox > Controller->V2.LastStatusMailbox)
5323         NextStatusMailbox = Controller->V2.FirstStatusMailbox;
5324       DAC960_V2_ProcessCompletedCommand(Command);
5325     }
5326   Controller->V2.NextStatusMailbox = NextStatusMailbox;
5327   /*
5328     Attempt to remove additional I/O Requests from the Controller's
5329     I/O Request Queue and queue them to the Controller.
5330   */
5331   DAC960_ProcessRequest(Controller);
5332   spin_unlock_irqrestore(&Controller->queue_lock, flags);
5333   return IRQ_HANDLED;
5334 }
5335
5336
5337 /*
5338   DAC960_LP_InterruptHandler handles hardware interrupts from DAC960 LP Series
5339   Controllers.
5340 */
5341
5342 static irqreturn_t DAC960_LP_InterruptHandler(int IRQ_Channel,
5343                                        void *DeviceIdentifier)
5344 {
5345   DAC960_Controller_T *Controller = DeviceIdentifier;
5346   void __iomem *ControllerBaseAddress = Controller->BaseAddress;
5347   DAC960_V2_StatusMailbox_T *NextStatusMailbox;
5348   unsigned long flags;
5349
5350   spin_lock_irqsave(&Controller->queue_lock, flags);
5351   DAC960_LP_AcknowledgeInterrupt(ControllerBaseAddress);
5352   NextStatusMailbox = Controller->V2.NextStatusMailbox;
5353   while (NextStatusMailbox->Fields.CommandIdentifier > 0)
5354     {
5355       DAC960_V2_CommandIdentifier_T CommandIdentifier =
5356         NextStatusMailbox->Fields.CommandIdentifier;
5357       DAC960_Command_T *Command = Controller->Commands[CommandIdentifier-1];
5358       Command->V2.CommandStatus = NextStatusMailbox->Fields.CommandStatus;
5359       Command->V2.RequestSenseLength =
5360         NextStatusMailbox->Fields.RequestSenseLength;
5361       Command->V2.DataTransferResidue =
5362         NextStatusMailbox->Fields.DataTransferResidue;
5363       NextStatusMailbox->Words[0] = 0;
5364       if (++NextStatusMailbox > Controller->V2.LastStatusMailbox)
5365         NextStatusMailbox = Controller->V2.FirstStatusMailbox;
5366       DAC960_V2_ProcessCompletedCommand(Command);
5367     }
5368   Controller->V2.NextStatusMailbox = NextStatusMailbox;
5369   /*
5370     Attempt to remove additional I/O Requests from the Controller's
5371     I/O Request Queue and queue them to the Controller.
5372   */
5373   DAC960_ProcessRequest(Controller);
5374   spin_unlock_irqrestore(&Controller->queue_lock, flags);
5375   return IRQ_HANDLED;
5376 }
5377
5378
5379 /*
5380   DAC960_LA_InterruptHandler handles hardware interrupts from DAC960 LA Series
5381   Controllers.
5382 */
5383
5384 static irqreturn_t DAC960_LA_InterruptHandler(int IRQ_Channel,
5385                                        void *DeviceIdentifier)
5386 {
5387   DAC960_Controller_T *Controller = DeviceIdentifier;
5388   void __iomem *ControllerBaseAddress = Controller->BaseAddress;
5389   DAC960_V1_StatusMailbox_T *NextStatusMailbox;
5390   unsigned long flags;
5391
5392   spin_lock_irqsave(&Controller->queue_lock, flags);
5393   DAC960_LA_AcknowledgeInterrupt(ControllerBaseAddress);
5394   NextStatusMailbox = Controller->V1.NextStatusMailbox;
5395   while (NextStatusMailbox->Fields.Valid)
5396     {
5397       DAC960_V1_CommandIdentifier_T CommandIdentifier =
5398         NextStatusMailbox->Fields.CommandIdentifier;
5399       DAC960_Command_T *Command = Controller->Commands[CommandIdentifier-1];
5400       Command->V1.CommandStatus = NextStatusMailbox->Fields.CommandStatus;
5401       NextStatusMailbox->Word = 0;
5402       if (++NextStatusMailbox > Controller->V1.LastStatusMailbox)
5403         NextStatusMailbox = Controller->V1.FirstStatusMailbox;
5404       DAC960_V1_ProcessCompletedCommand(Command);
5405     }
5406   Controller->V1.NextStatusMailbox = NextStatusMailbox;
5407   /*
5408     Attempt to remove additional I/O Requests from the Controller's
5409     I/O Request Queue and queue them to the Controller.
5410   */
5411   DAC960_ProcessRequest(Controller);
5412   spin_unlock_irqrestore(&Controller->queue_lock, flags);
5413   return IRQ_HANDLED;
5414 }
5415
5416
5417 /*
5418   DAC960_PG_InterruptHandler handles hardware interrupts from DAC960 PG Series
5419   Controllers.
5420 */
5421
5422 static irqreturn_t DAC960_PG_InterruptHandler(int IRQ_Channel,
5423                                        void *DeviceIdentifier)
5424 {
5425   DAC960_Controller_T *Controller = DeviceIdentifier;
5426   void __iomem *ControllerBaseAddress = Controller->BaseAddress;
5427   DAC960_V1_StatusMailbox_T *NextStatusMailbox;
5428   unsigned long flags;
5429
5430   spin_lock_irqsave(&Controller->queue_lock, flags);
5431   DAC960_PG_AcknowledgeInterrupt(ControllerBaseAddress);
5432   NextStatusMailbox = Controller->V1.NextStatusMailbox;
5433   while (NextStatusMailbox->Fields.Valid)
5434     {
5435       DAC960_V1_CommandIdentifier_T CommandIdentifier =
5436         NextStatusMailbox->Fields.CommandIdentifier;
5437       DAC960_Command_T *Command = Controller->Commands[CommandIdentifier-1];
5438       Command->V1.CommandStatus = NextStatusMailbox->Fields.CommandStatus;
5439       NextStatusMailbox->Word = 0;
5440       if (++NextStatusMailbox > Controller->V1.LastStatusMailbox)
5441         NextStatusMailbox = Controller->V1.FirstStatusMailbox;
5442       DAC960_V1_ProcessCompletedCommand(Command);
5443     }
5444   Controller->V1.NextStatusMailbox = NextStatusMailbox;
5445   /*
5446     Attempt to remove additional I/O Requests from the Controller's
5447     I/O Request Queue and queue them to the Controller.
5448   */
5449   DAC960_ProcessRequest(Controller);
5450   spin_unlock_irqrestore(&Controller->queue_lock, flags);
5451   return IRQ_HANDLED;
5452 }
5453
5454
5455 /*
5456   DAC960_PD_InterruptHandler handles hardware interrupts from DAC960 PD Series
5457   Controllers.
5458 */
5459
5460 static irqreturn_t DAC960_PD_InterruptHandler(int IRQ_Channel,
5461                                        void *DeviceIdentifier)
5462 {
5463   DAC960_Controller_T *Controller = DeviceIdentifier;
5464   void __iomem *ControllerBaseAddress = Controller->BaseAddress;
5465   unsigned long flags;
5466
5467   spin_lock_irqsave(&Controller->queue_lock, flags);
5468   while (DAC960_PD_StatusAvailableP(ControllerBaseAddress))
5469     {
5470       DAC960_V1_CommandIdentifier_T CommandIdentifier =
5471         DAC960_PD_ReadStatusCommandIdentifier(ControllerBaseAddress);
5472       DAC960_Command_T *Command = Controller->Commands[CommandIdentifier-1];
5473       Command->V1.CommandStatus =
5474         DAC960_PD_ReadStatusRegister(ControllerBaseAddress);
5475       DAC960_PD_AcknowledgeInterrupt(ControllerBaseAddress);
5476       DAC960_PD_AcknowledgeStatus(ControllerBaseAddress);
5477       DAC960_V1_ProcessCompletedCommand(Command);
5478     }
5479   /*
5480     Attempt to remove additional I/O Requests from the Controller's
5481     I/O Request Queue and queue them to the Controller.
5482   */
5483   DAC960_ProcessRequest(Controller);
5484   spin_unlock_irqrestore(&Controller->queue_lock, flags);
5485   return IRQ_HANDLED;
5486 }
5487
5488
5489 /*
5490   DAC960_P_InterruptHandler handles hardware interrupts from DAC960 P Series
5491   Controllers.
5492
5493   Translations of DAC960_V1_Enquiry and DAC960_V1_GetDeviceState rely
5494   on the data having been placed into DAC960_Controller_T, rather than
5495   an arbitrary buffer.
5496 */
5497
5498 static irqreturn_t DAC960_P_InterruptHandler(int IRQ_Channel,
5499                                       void *DeviceIdentifier)
5500 {
5501   DAC960_Controller_T *Controller = DeviceIdentifier;
5502   void __iomem *ControllerBaseAddress = Controller->BaseAddress;
5503   unsigned long flags;
5504
5505   spin_lock_irqsave(&Controller->queue_lock, flags);
5506   while (DAC960_PD_StatusAvailableP(ControllerBaseAddress))
5507     {
5508       DAC960_V1_CommandIdentifier_T CommandIdentifier =
5509         DAC960_PD_ReadStatusCommandIdentifier(ControllerBaseAddress);
5510       DAC960_Command_T *Command = Controller->Commands[CommandIdentifier-1];
5511       DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
5512       DAC960_V1_CommandOpcode_T CommandOpcode =
5513         CommandMailbox->Common.CommandOpcode;
5514       Command->V1.CommandStatus =
5515         DAC960_PD_ReadStatusRegister(ControllerBaseAddress);
5516       DAC960_PD_AcknowledgeInterrupt(ControllerBaseAddress);
5517       DAC960_PD_AcknowledgeStatus(ControllerBaseAddress);
5518       switch (CommandOpcode)
5519         {
5520         case DAC960_V1_Enquiry_Old:
5521           Command->V1.CommandMailbox.Common.CommandOpcode = DAC960_V1_Enquiry;
5522           DAC960_P_To_PD_TranslateEnquiry(Controller->V1.NewEnquiry);
5523           break;
5524         case DAC960_V1_GetDeviceState_Old:
5525           Command->V1.CommandMailbox.Common.CommandOpcode =
5526                                                 DAC960_V1_GetDeviceState;
5527           DAC960_P_To_PD_TranslateDeviceState(Controller->V1.NewDeviceState);
5528           break;
5529         case DAC960_V1_Read_Old:
5530           Command->V1.CommandMailbox.Common.CommandOpcode = DAC960_V1_Read;
5531           DAC960_P_To_PD_TranslateReadWriteCommand(CommandMailbox);
5532           break;
5533         case DAC960_V1_Write_Old:
5534           Command->V1.CommandMailbox.Common.CommandOpcode = DAC960_V1_Write;
5535           DAC960_P_To_PD_TranslateReadWriteCommand(CommandMailbox);
5536           break;
5537         case DAC960_V1_ReadWithScatterGather_Old:
5538           Command->V1.CommandMailbox.Common.CommandOpcode =
5539             DAC960_V1_ReadWithScatterGather;
5540           DAC960_P_To_PD_TranslateReadWriteCommand(CommandMailbox);
5541           break;
5542         case DAC960_V1_WriteWithScatterGather_Old:
5543           Command->V1.CommandMailbox.Common.CommandOpcode =
5544             DAC960_V1_WriteWithScatterGather;
5545           DAC960_P_To_PD_TranslateReadWriteCommand(CommandMailbox);
5546           break;
5547         default:
5548           break;
5549         }
5550       DAC960_V1_ProcessCompletedCommand(Command);
5551     }
5552   /*
5553     Attempt to remove additional I/O Requests from the Controller's
5554     I/O Request Queue and queue them to the Controller.
5555   */
5556   DAC960_ProcessRequest(Controller);
5557   spin_unlock_irqrestore(&Controller->queue_lock, flags);
5558   return IRQ_HANDLED;
5559 }
5560
5561
5562 /*
5563   DAC960_V1_QueueMonitoringCommand queues a Monitoring Command to DAC960 V1
5564   Firmware Controllers.
5565 */
5566
5567 static void DAC960_V1_QueueMonitoringCommand(DAC960_Command_T *Command)
5568 {
5569   DAC960_Controller_T *Controller = Command->Controller;
5570   DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
5571   DAC960_V1_ClearCommand(Command);
5572   Command->CommandType = DAC960_MonitoringCommand;
5573   CommandMailbox->Type3.CommandOpcode = DAC960_V1_Enquiry;
5574   CommandMailbox->Type3.BusAddress = Controller->V1.NewEnquiryDMA;
5575   DAC960_QueueCommand(Command);
5576 }
5577
5578
5579 /*
5580   DAC960_V2_QueueMonitoringCommand queues a Monitoring Command to DAC960 V2
5581   Firmware Controllers.
5582 */
5583
5584 static void DAC960_V2_QueueMonitoringCommand(DAC960_Command_T *Command)
5585 {
5586   DAC960_Controller_T *Controller = Command->Controller;
5587   DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox;
5588   DAC960_V2_ClearCommand(Command);
5589   Command->CommandType = DAC960_MonitoringCommand;
5590   CommandMailbox->ControllerInfo.CommandOpcode = DAC960_V2_IOCTL;
5591   CommandMailbox->ControllerInfo.CommandControlBits
5592                                 .DataTransferControllerToHost = true;
5593   CommandMailbox->ControllerInfo.CommandControlBits
5594                                 .NoAutoRequestSense = true;
5595   CommandMailbox->ControllerInfo.DataTransferSize =
5596     sizeof(DAC960_V2_ControllerInfo_T);
5597   CommandMailbox->ControllerInfo.ControllerNumber = 0;
5598   CommandMailbox->ControllerInfo.IOCTL_Opcode = DAC960_V2_GetControllerInfo;
5599   CommandMailbox->ControllerInfo.DataTransferMemoryAddress
5600                                 .ScatterGatherSegments[0]
5601                                 .SegmentDataPointer =
5602     Controller->V2.NewControllerInformationDMA;
5603   CommandMailbox->ControllerInfo.DataTransferMemoryAddress
5604                                 .ScatterGatherSegments[0]
5605                                 .SegmentByteCount =
5606     CommandMailbox->ControllerInfo.DataTransferSize;
5607   DAC960_QueueCommand(Command);
5608 }
5609
5610
5611 /*
5612   DAC960_MonitoringTimerFunction is the timer function for monitoring
5613   the status of DAC960 Controllers.
5614 */
5615
5616 static void DAC960_MonitoringTimerFunction(unsigned long TimerData)
5617 {
5618   DAC960_Controller_T *Controller = (DAC960_Controller_T *) TimerData;
5619   DAC960_Command_T *Command;
5620   unsigned long flags;
5621
5622   if (Controller->FirmwareType == DAC960_V1_Controller)
5623     {
5624       spin_lock_irqsave(&Controller->queue_lock, flags);
5625       /*
5626         Queue a Status Monitoring Command to Controller.
5627       */
5628       Command = DAC960_AllocateCommand(Controller);
5629       if (Command != NULL)
5630         DAC960_V1_QueueMonitoringCommand(Command);
5631       else Controller->MonitoringCommandDeferred = true;
5632       spin_unlock_irqrestore(&Controller->queue_lock, flags);
5633     }
5634   else
5635     {
5636       DAC960_V2_ControllerInfo_T *ControllerInfo =
5637         &Controller->V2.ControllerInformation;
5638       unsigned int StatusChangeCounter =
5639         Controller->V2.HealthStatusBuffer->StatusChangeCounter;
5640       bool ForceMonitoringCommand = false;
5641       if (time_after(jiffies, Controller->SecondaryMonitoringTime
5642           + DAC960_SecondaryMonitoringInterval))
5643         {
5644           int LogicalDriveNumber;
5645           for (LogicalDriveNumber = 0;
5646                LogicalDriveNumber < DAC960_MaxLogicalDrives;
5647                LogicalDriveNumber++)
5648             {
5649               DAC960_V2_LogicalDeviceInfo_T *LogicalDeviceInfo =
5650                 Controller->V2.LogicalDeviceInformation[LogicalDriveNumber];
5651               if (LogicalDeviceInfo == NULL) continue;
5652               if (!LogicalDeviceInfo->LogicalDeviceControl
5653                                      .LogicalDeviceInitialized)
5654                 {
5655                   ForceMonitoringCommand = true;
5656                   break;
5657                 }
5658             }
5659           Controller->SecondaryMonitoringTime = jiffies;
5660         }
5661       if (StatusChangeCounter == Controller->V2.StatusChangeCounter &&
5662           Controller->V2.HealthStatusBuffer->NextEventSequenceNumber
5663           == Controller->V2.NextEventSequenceNumber &&
5664           (ControllerInfo->BackgroundInitializationsActive +
5665            ControllerInfo->LogicalDeviceInitializationsActive +
5666            ControllerInfo->PhysicalDeviceInitializationsActive +
5667            ControllerInfo->ConsistencyChecksActive +
5668            ControllerInfo->RebuildsActive +
5669            ControllerInfo->OnlineExpansionsActive == 0 ||
5670            time_before(jiffies, Controller->PrimaryMonitoringTime
5671            + DAC960_MonitoringTimerInterval)) &&
5672           !ForceMonitoringCommand)
5673         {
5674           Controller->MonitoringTimer.expires =
5675             jiffies + DAC960_HealthStatusMonitoringInterval;
5676             add_timer(&Controller->MonitoringTimer);
5677           return;
5678         }
5679       Controller->V2.StatusChangeCounter = StatusChangeCounter;
5680       Controller->PrimaryMonitoringTime = jiffies;
5681
5682       spin_lock_irqsave(&Controller->queue_lock, flags);
5683       /*
5684         Queue a Status Monitoring Command to Controller.
5685       */
5686       Command = DAC960_AllocateCommand(Controller);
5687       if (Command != NULL)
5688         DAC960_V2_QueueMonitoringCommand(Command);
5689       else Controller->MonitoringCommandDeferred = true;
5690       spin_unlock_irqrestore(&Controller->queue_lock, flags);
5691       /*
5692         Wake up any processes waiting on a Health Status Buffer change.
5693       */
5694       wake_up(&Controller->HealthStatusWaitQueue);
5695     }
5696 }
5697
5698 /*
5699   DAC960_CheckStatusBuffer verifies that there is room to hold ByteCount
5700   additional bytes in the Combined Status Buffer and grows the buffer if
5701   necessary.  It returns true if there is enough room and false otherwise.
5702 */
5703
5704 static bool DAC960_CheckStatusBuffer(DAC960_Controller_T *Controller,
5705                                         unsigned int ByteCount)
5706 {
5707   unsigned char *NewStatusBuffer;
5708   if (Controller->InitialStatusLength + 1 +
5709       Controller->CurrentStatusLength + ByteCount + 1 <=
5710       Controller->CombinedStatusBufferLength)
5711     return true;
5712   if (Controller->CombinedStatusBufferLength == 0)
5713     {
5714       unsigned int NewStatusBufferLength = DAC960_InitialStatusBufferSize;
5715       while (NewStatusBufferLength < ByteCount)
5716         NewStatusBufferLength *= 2;
5717       Controller->CombinedStatusBuffer = kmalloc(NewStatusBufferLength,
5718                                                   GFP_ATOMIC);
5719       if (Controller->CombinedStatusBuffer == NULL) return false;
5720       Controller->CombinedStatusBufferLength = NewStatusBufferLength;
5721       return true;
5722     }
5723   NewStatusBuffer = kmalloc(2 * Controller->CombinedStatusBufferLength,
5724                              GFP_ATOMIC);
5725   if (NewStatusBuffer == NULL)
5726     {
5727       DAC960_Warning("Unable to expand Combined Status Buffer - Truncating\n",
5728                      Controller);
5729       return false;
5730     }
5731   memcpy(NewStatusBuffer, Controller->CombinedStatusBuffer,
5732          Controller->CombinedStatusBufferLength);
5733   kfree(Controller->CombinedStatusBuffer);
5734   Controller->CombinedStatusBuffer = NewStatusBuffer;
5735   Controller->CombinedStatusBufferLength *= 2;
5736   Controller->CurrentStatusBuffer =
5737     &NewStatusBuffer[Controller->InitialStatusLength + 1];
5738   return true;
5739 }
5740
5741
5742 /*
5743   DAC960_Message prints Driver Messages.
5744 */
5745
5746 static void DAC960_Message(DAC960_MessageLevel_T MessageLevel,
5747                            unsigned char *Format,
5748                            DAC960_Controller_T *Controller,
5749                            ...)
5750 {
5751   static unsigned char Buffer[DAC960_LineBufferSize];
5752   static bool BeginningOfLine = true;
5753   va_list Arguments;
5754   int Length = 0;
5755   va_start(Arguments, Controller);
5756   Length = vsprintf(Buffer, Format, Arguments);
5757   va_end(Arguments);
5758   if (Controller == NULL)
5759     printk("%sDAC960#%d: %s", DAC960_MessageLevelMap[MessageLevel],
5760            DAC960_ControllerCount, Buffer);
5761   else if (MessageLevel == DAC960_AnnounceLevel ||
5762            MessageLevel == DAC960_InfoLevel)
5763     {
5764       if (!Controller->ControllerInitialized)
5765         {
5766           if (DAC960_CheckStatusBuffer(Controller, Length))
5767             {
5768               strcpy(&Controller->CombinedStatusBuffer
5769                                   [Controller->InitialStatusLength],
5770                      Buffer);
5771               Controller->InitialStatusLength += Length;
5772               Controller->CurrentStatusBuffer =
5773                 &Controller->CombinedStatusBuffer
5774                              [Controller->InitialStatusLength + 1];
5775             }
5776           if (MessageLevel == DAC960_AnnounceLevel)
5777             {
5778               static int AnnouncementLines = 0;
5779               if (++AnnouncementLines <= 2)
5780                 printk("%sDAC960: %s", DAC960_MessageLevelMap[MessageLevel],
5781                        Buffer);
5782             }
5783           else
5784             {
5785               if (BeginningOfLine)
5786                 {
5787                   if (Buffer[0] != '\n' || Length > 1)
5788                     printk("%sDAC960#%d: %s",
5789                            DAC960_MessageLevelMap[MessageLevel],
5790                            Controller->ControllerNumber, Buffer);
5791                 }
5792               else printk("%s", Buffer);
5793             }
5794         }
5795       else if (DAC960_CheckStatusBuffer(Controller, Length))
5796         {
5797           strcpy(&Controller->CurrentStatusBuffer[
5798                     Controller->CurrentStatusLength], Buffer);
5799           Controller->CurrentStatusLength += Length;
5800         }
5801     }
5802   else if (MessageLevel == DAC960_ProgressLevel)
5803     {
5804       strcpy(Controller->ProgressBuffer, Buffer);
5805       Controller->ProgressBufferLength = Length;
5806       if (Controller->EphemeralProgressMessage)
5807         {
5808           if (time_after_eq(jiffies, Controller->LastProgressReportTime
5809               + DAC960_ProgressReportingInterval))
5810             {
5811               printk("%sDAC960#%d: %s", DAC960_MessageLevelMap[MessageLevel],
5812                      Controller->ControllerNumber, Buffer);
5813               Controller->LastProgressReportTime = jiffies;
5814             }
5815         }
5816       else printk("%sDAC960#%d: %s", DAC960_MessageLevelMap[MessageLevel],
5817                   Controller->ControllerNumber, Buffer);
5818     }
5819   else if (MessageLevel == DAC960_UserCriticalLevel)
5820     {
5821       strcpy(&Controller->UserStatusBuffer[Controller->UserStatusLength],
5822              Buffer);
5823       Controller->UserStatusLength += Length;
5824       if (Buffer[0] != '\n' || Length > 1)
5825         printk("%sDAC960#%d: %s", DAC960_MessageLevelMap[MessageLevel],
5826                Controller->ControllerNumber, Buffer);
5827     }
5828   else
5829     {
5830       if (BeginningOfLine)
5831         printk("%sDAC960#%d: %s", DAC960_MessageLevelMap[MessageLevel],
5832                Controller->ControllerNumber, Buffer);
5833       else printk("%s", Buffer);
5834     }
5835   BeginningOfLine = (Buffer[Length-1] == '\n');
5836 }
5837
5838
5839 /*
5840   DAC960_ParsePhysicalDevice parses spaces followed by a Physical Device
5841   Channel:TargetID specification from a User Command string.  It updates
5842   Channel and TargetID and returns true on success and false on failure.
5843 */
5844
5845 static bool DAC960_ParsePhysicalDevice(DAC960_Controller_T *Controller,
5846                                           char *UserCommandString,
5847                                           unsigned char *Channel,
5848                                           unsigned char *TargetID)
5849 {
5850   char *NewUserCommandString = UserCommandString;
5851   unsigned long XChannel, XTargetID;
5852   while (*UserCommandString == ' ') UserCommandString++;
5853   if (UserCommandString == NewUserCommandString)
5854     return false;
5855   XChannel = simple_strtoul(UserCommandString, &NewUserCommandString, 10);
5856   if (NewUserCommandString == UserCommandString ||
5857       *NewUserCommandString != ':' ||
5858       XChannel >= Controller->Channels)
5859     return false;
5860   UserCommandString = ++NewUserCommandString;
5861   XTargetID = simple_strtoul(UserCommandString, &NewUserCommandString, 10);
5862   if (NewUserCommandString == UserCommandString ||
5863       *NewUserCommandString != '\0' ||
5864       XTargetID >= Controller->Targets)
5865     return false;
5866   *Channel = XChannel;
5867   *TargetID = XTargetID;
5868   return true;
5869 }
5870
5871
5872 /*
5873   DAC960_ParseLogicalDrive parses spaces followed by a Logical Drive Number
5874   specification from a User Command string.  It updates LogicalDriveNumber and
5875   returns true on success and false on failure.
5876 */
5877
5878 static bool DAC960_ParseLogicalDrive(DAC960_Controller_T *Controller,
5879                                         char *UserCommandString,
5880                                         unsigned char *LogicalDriveNumber)
5881 {
5882   char *NewUserCommandString = UserCommandString;
5883   unsigned long XLogicalDriveNumber;
5884   while (*UserCommandString == ' ') UserCommandString++;
5885   if (UserCommandString == NewUserCommandString)
5886     return false;
5887   XLogicalDriveNumber =
5888     simple_strtoul(UserCommandString, &NewUserCommandString, 10);
5889   if (NewUserCommandString == UserCommandString ||
5890       *NewUserCommandString != '\0' ||
5891       XLogicalDriveNumber > DAC960_MaxLogicalDrives - 1)
5892     return false;
5893   *LogicalDriveNumber = XLogicalDriveNumber;
5894   return true;
5895 }
5896
5897
5898 /*
5899   DAC960_V1_SetDeviceState sets the Device State for a Physical Device for
5900   DAC960 V1 Firmware Controllers.
5901 */
5902
5903 static void DAC960_V1_SetDeviceState(DAC960_Controller_T *Controller,
5904                                      DAC960_Command_T *Command,
5905                                      unsigned char Channel,
5906                                      unsigned char TargetID,
5907                                      DAC960_V1_PhysicalDeviceState_T
5908                                        DeviceState,
5909                                      const unsigned char *DeviceStateString)
5910 {
5911   DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
5912   CommandMailbox->Type3D.CommandOpcode = DAC960_V1_StartDevice;
5913   CommandMailbox->Type3D.Channel = Channel;
5914   CommandMailbox->Type3D.TargetID = TargetID;
5915   CommandMailbox->Type3D.DeviceState = DeviceState;
5916   CommandMailbox->Type3D.Modifier = 0;
5917   DAC960_ExecuteCommand(Command);
5918   switch (Command->V1.CommandStatus)
5919     {
5920     case DAC960_V1_NormalCompletion:
5921       DAC960_UserCritical("%s of Physical Device %d:%d Succeeded\n", Controller,
5922                           DeviceStateString, Channel, TargetID);
5923       break;
5924     case DAC960_V1_UnableToStartDevice:
5925       DAC960_UserCritical("%s of Physical Device %d:%d Failed - "
5926                           "Unable to Start Device\n", Controller,
5927                           DeviceStateString, Channel, TargetID);
5928       break;
5929     case DAC960_V1_NoDeviceAtAddress:
5930       DAC960_UserCritical("%s of Physical Device %d:%d Failed - "
5931                           "No Device at Address\n", Controller,
5932                           DeviceStateString, Channel, TargetID);
5933       break;
5934     case DAC960_V1_InvalidChannelOrTargetOrModifier:
5935       DAC960_UserCritical("%s of Physical Device %d:%d Failed - "
5936                           "Invalid Channel or Target or Modifier\n",
5937                           Controller, DeviceStateString, Channel, TargetID);
5938       break;
5939     case DAC960_V1_ChannelBusy:
5940       DAC960_UserCritical("%s of Physical Device %d:%d Failed - "
5941                           "Channel Busy\n", Controller,
5942                           DeviceStateString, Channel, TargetID);
5943       break;
5944     default:
5945       DAC960_UserCritical("%s of Physical Device %d:%d Failed - "
5946                           "Unexpected Status %04X\n", Controller,
5947                           DeviceStateString, Channel, TargetID,
5948                           Command->V1.CommandStatus);
5949       break;
5950     }
5951 }
5952
5953
5954 /*
5955   DAC960_V1_ExecuteUserCommand executes a User Command for DAC960 V1 Firmware
5956   Controllers.
5957 */
5958
5959 static bool DAC960_V1_ExecuteUserCommand(DAC960_Controller_T *Controller,
5960                                             unsigned char *UserCommand)
5961 {
5962   DAC960_Command_T *Command;
5963   DAC960_V1_CommandMailbox_T *CommandMailbox;
5964   unsigned long flags;
5965   unsigned char Channel, TargetID, LogicalDriveNumber;
5966
5967   spin_lock_irqsave(&Controller->queue_lock, flags);
5968   while ((Command = DAC960_AllocateCommand(Controller)) == NULL)
5969     DAC960_WaitForCommand(Controller);
5970   spin_unlock_irqrestore(&Controller->queue_lock, flags);
5971   Controller->UserStatusLength = 0;
5972   DAC960_V1_ClearCommand(Command);
5973   Command->CommandType = DAC960_ImmediateCommand;
5974   CommandMailbox = &Command->V1.CommandMailbox;
5975   if (strcmp(UserCommand, "flush-cache") == 0)
5976     {
5977       CommandMailbox->Type3.CommandOpcode = DAC960_V1_Flush;
5978       DAC960_ExecuteCommand(Command);
5979       DAC960_UserCritical("Cache Flush Completed\n", Controller);
5980     }
5981   else if (strncmp(UserCommand, "kill", 4) == 0 &&
5982            DAC960_ParsePhysicalDevice(Controller, &UserCommand[4],
5983                                       &Channel, &TargetID))
5984     {
5985       DAC960_V1_DeviceState_T *DeviceState =
5986         &Controller->V1.DeviceState[Channel][TargetID];
5987       if (DeviceState->Present &&
5988           DeviceState->DeviceType == DAC960_V1_DiskType &&
5989           DeviceState->DeviceState != DAC960_V1_Device_Dead)
5990         DAC960_V1_SetDeviceState(Controller, Command, Channel, TargetID,
5991                                  DAC960_V1_Device_Dead, "Kill");
5992       else DAC960_UserCritical("Kill of Physical Device %d:%d Illegal\n",
5993                                Controller, Channel, TargetID);
5994     }
5995   else if (strncmp(UserCommand, "make-online", 11) == 0 &&
5996            DAC960_ParsePhysicalDevice(Controller, &UserCommand[11],
5997                                       &Channel, &TargetID))
5998     {
5999       DAC960_V1_DeviceState_T *DeviceState =
6000         &Controller->V1.DeviceState[Channel][TargetID];
6001       if (DeviceState->Present &&
6002           DeviceState->DeviceType == DAC960_V1_DiskType &&
6003           DeviceState->DeviceState == DAC960_V1_Device_Dead)
6004         DAC960_V1_SetDeviceState(Controller, Command, Channel, TargetID,
6005                                  DAC960_V1_Device_Online, "Make Online");
6006       else DAC960_UserCritical("Make Online of Physical Device %d:%d Illegal\n",
6007                                Controller, Channel, TargetID);
6008
6009     }
6010   else if (strncmp(UserCommand, "make-standby", 12) == 0 &&
6011            DAC960_ParsePhysicalDevice(Controller, &UserCommand[12],
6012                                       &Channel, &TargetID))
6013     {
6014       DAC960_V1_DeviceState_T *DeviceState =
6015         &Controller->V1.DeviceState[Channel][TargetID];
6016       if (DeviceState->Present &&
6017           DeviceState->DeviceType == DAC960_V1_DiskType &&
6018           DeviceState->DeviceState == DAC960_V1_Device_Dead)
6019         DAC960_V1_SetDeviceState(Controller, Command, Channel, TargetID,
6020                                  DAC960_V1_Device_Standby, "Make Standby");
6021       else DAC960_UserCritical("Make Standby of Physical "
6022                                "Device %d:%d Illegal\n",
6023                                Controller, Channel, TargetID);
6024     }
6025   else if (strncmp(UserCommand, "rebuild", 7) == 0 &&
6026            DAC960_ParsePhysicalDevice(Controller, &UserCommand[7],
6027                                       &Channel, &TargetID))
6028     {
6029       CommandMailbox->Type3D.CommandOpcode = DAC960_V1_RebuildAsync;
6030       CommandMailbox->Type3D.Channel = Channel;
6031       CommandMailbox->Type3D.TargetID = TargetID;
6032       DAC960_ExecuteCommand(Command);
6033       switch (Command->V1.CommandStatus)
6034         {
6035         case DAC960_V1_NormalCompletion:
6036           DAC960_UserCritical("Rebuild of Physical Device %d:%d Initiated\n",
6037                               Controller, Channel, TargetID);
6038           break;
6039         case DAC960_V1_AttemptToRebuildOnlineDrive:
6040           DAC960_UserCritical("Rebuild of Physical Device %d:%d Failed - "
6041                               "Attempt to Rebuild Online or "
6042                               "Unresponsive Drive\n",
6043                               Controller, Channel, TargetID);
6044           break;
6045         case DAC960_V1_NewDiskFailedDuringRebuild:
6046           DAC960_UserCritical("Rebuild of Physical Device %d:%d Failed - "
6047                               "New Disk Failed During Rebuild\n",
6048                               Controller, Channel, TargetID);
6049           break;
6050         case DAC960_V1_InvalidDeviceAddress:
6051           DAC960_UserCritical("Rebuild of Physical Device %d:%d Failed - "
6052                               "Invalid Device Address\n",
6053                               Controller, Channel, TargetID);
6054           break;
6055         case DAC960_V1_RebuildOrCheckAlreadyInProgress:
6056           DAC960_UserCritical("Rebuild of Physical Device %d:%d Failed - "
6057                               "Rebuild or Consistency Check Already "
6058                               "in Progress\n", Controller, Channel, TargetID);
6059           break;
6060         default:
6061           DAC960_UserCritical("Rebuild of Physical Device %d:%d Failed - "
6062                               "Unexpected Status %04X\n", Controller,
6063                               Channel, TargetID, Command->V1.CommandStatus);
6064           break;
6065         }
6066     }
6067   else if (strncmp(UserCommand, "check-consistency", 17) == 0 &&
6068            DAC960_ParseLogicalDrive(Controller, &UserCommand[17],
6069                                     &LogicalDriveNumber))
6070     {
6071       CommandMailbox->Type3C.CommandOpcode = DAC960_V1_CheckConsistencyAsync;
6072       CommandMailbox->Type3C.LogicalDriveNumber = LogicalDriveNumber;
6073       CommandMailbox->Type3C.AutoRestore = true;
6074       DAC960_ExecuteCommand(Command);
6075       switch (Command->V1.CommandStatus)
6076         {
6077         case DAC960_V1_NormalCompletion:
6078           DAC960_UserCritical("Consistency Check of Logical Drive %d "
6079                               "(/dev/rd/c%dd%d) Initiated\n",
6080                               Controller, LogicalDriveNumber,
6081                               Controller->ControllerNumber,
6082                               LogicalDriveNumber);
6083           break;
6084         case DAC960_V1_DependentDiskIsDead:
6085           DAC960_UserCritical("Consistency Check of Logical Drive %d "
6086                               "(/dev/rd/c%dd%d) Failed - "
6087                               "Dependent Physical Device is DEAD\n",
6088                               Controller, LogicalDriveNumber,
6089                               Controller->ControllerNumber,
6090                               LogicalDriveNumber);
6091           break;
6092         case DAC960_V1_InvalidOrNonredundantLogicalDrive:
6093           DAC960_UserCritical("Consistency Check of Logical Drive %d "
6094                               "(/dev/rd/c%dd%d) Failed - "
6095                               "Invalid or Nonredundant Logical Drive\n",
6096                               Controller, LogicalDriveNumber,
6097                               Controller->ControllerNumber,
6098                               LogicalDriveNumber);
6099           break;
6100         case DAC960_V1_RebuildOrCheckAlreadyInProgress:
6101           DAC960_UserCritical("Consistency Check of Logical Drive %d "
6102                               "(/dev/rd/c%dd%d) Failed - Rebuild or "
6103                               "Consistency Check Already in Progress\n",
6104                               Controller, LogicalDriveNumber,
6105                               Controller->ControllerNumber,
6106                               LogicalDriveNumber);
6107           break;
6108         default:
6109           DAC960_UserCritical("Consistency Check of Logical Drive %d "
6110                               "(/dev/rd/c%dd%d) Failed - "
6111                               "Unexpected Status %04X\n",
6112                               Controller, LogicalDriveNumber,
6113                               Controller->ControllerNumber,
6114                               LogicalDriveNumber, Command->V1.CommandStatus);
6115           break;
6116         }
6117     }
6118   else if (strcmp(UserCommand, "cancel-rebuild") == 0 ||
6119            strcmp(UserCommand, "cancel-consistency-check") == 0)
6120     {
6121       /*
6122         the OldRebuildRateConstant is never actually used
6123         once its value is retrieved from the controller.
6124        */
6125       unsigned char *OldRebuildRateConstant;
6126       dma_addr_t OldRebuildRateConstantDMA;
6127
6128       OldRebuildRateConstant = pci_alloc_consistent( Controller->PCIDevice,
6129                 sizeof(char), &OldRebuildRateConstantDMA);
6130       if (OldRebuildRateConstant == NULL) {
6131          DAC960_UserCritical("Cancellation of Rebuild or "
6132                              "Consistency Check Failed - "
6133                              "Out of Memory",
6134                              Controller);
6135          goto failure;
6136       }
6137       CommandMailbox->Type3R.CommandOpcode = DAC960_V1_RebuildControl;
6138       CommandMailbox->Type3R.RebuildRateConstant = 0xFF;
6139       CommandMailbox->Type3R.BusAddress = OldRebuildRateConstantDMA;
6140       DAC960_ExecuteCommand(Command);
6141       switch (Command->V1.CommandStatus)
6142         {
6143         case DAC960_V1_NormalCompletion:
6144           DAC960_UserCritical("Rebuild or Consistency Check Cancelled\n",
6145                               Controller);
6146           break;
6147         default:
6148           DAC960_UserCritical("Cancellation of Rebuild or "
6149                               "Consistency Check Failed - "
6150                               "Unexpected Status %04X\n",
6151                               Controller, Command->V1.CommandStatus);
6152           break;
6153         }
6154 failure:
6155         pci_free_consistent(Controller->PCIDevice, sizeof(char),
6156                 OldRebuildRateConstant, OldRebuildRateConstantDMA);
6157     }
6158   else DAC960_UserCritical("Illegal User Command: '%s'\n",
6159                            Controller, UserCommand);
6160
6161   spin_lock_irqsave(&Controller->queue_lock, flags);
6162   DAC960_DeallocateCommand(Command);
6163   spin_unlock_irqrestore(&Controller->queue_lock, flags);
6164   return true;
6165 }
6166
6167
6168 /*
6169   DAC960_V2_TranslatePhysicalDevice translates a Physical Device Channel and
6170   TargetID into a Logical Device.  It returns true on success and false
6171   on failure.
6172 */
6173
6174 static bool DAC960_V2_TranslatePhysicalDevice(DAC960_Command_T *Command,
6175                                                  unsigned char Channel,
6176                                                  unsigned char TargetID,
6177                                                  unsigned short
6178                                                    *LogicalDeviceNumber)
6179 {
6180   DAC960_V2_CommandMailbox_T SavedCommandMailbox, *CommandMailbox;
6181   DAC960_Controller_T *Controller =  Command->Controller;
6182
6183   CommandMailbox = &Command->V2.CommandMailbox;
6184   memcpy(&SavedCommandMailbox, CommandMailbox,
6185          sizeof(DAC960_V2_CommandMailbox_T));
6186
6187   CommandMailbox->PhysicalDeviceInfo.CommandOpcode = DAC960_V2_IOCTL;
6188   CommandMailbox->PhysicalDeviceInfo.CommandControlBits
6189                                     .DataTransferControllerToHost = true;
6190   CommandMailbox->PhysicalDeviceInfo.CommandControlBits
6191                                     .NoAutoRequestSense = true;
6192   CommandMailbox->PhysicalDeviceInfo.DataTransferSize =
6193     sizeof(DAC960_V2_PhysicalToLogicalDevice_T);
6194   CommandMailbox->PhysicalDeviceInfo.PhysicalDevice.TargetID = TargetID;
6195   CommandMailbox->PhysicalDeviceInfo.PhysicalDevice.Channel = Channel;
6196   CommandMailbox->PhysicalDeviceInfo.IOCTL_Opcode =
6197     DAC960_V2_TranslatePhysicalToLogicalDevice;
6198   CommandMailbox->Common.DataTransferMemoryAddress
6199                         .ScatterGatherSegments[0]
6200                         .SegmentDataPointer =
6201                 Controller->V2.PhysicalToLogicalDeviceDMA;
6202   CommandMailbox->Common.DataTransferMemoryAddress
6203                         .ScatterGatherSegments[0]
6204                         .SegmentByteCount =
6205                 CommandMailbox->Common.DataTransferSize;
6206
6207   DAC960_ExecuteCommand(Command);
6208   *LogicalDeviceNumber = Controller->V2.PhysicalToLogicalDevice->LogicalDeviceNumber;
6209
6210   memcpy(CommandMailbox, &SavedCommandMailbox,
6211          sizeof(DAC960_V2_CommandMailbox_T));
6212   return (Command->V2.CommandStatus == DAC960_V2_NormalCompletion);
6213 }
6214
6215
6216 /*
6217   DAC960_V2_ExecuteUserCommand executes a User Command for DAC960 V2 Firmware
6218   Controllers.
6219 */
6220
6221 static bool DAC960_V2_ExecuteUserCommand(DAC960_Controller_T *Controller,
6222                                             unsigned char *UserCommand)
6223 {
6224   DAC960_Command_T *Command;
6225   DAC960_V2_CommandMailbox_T *CommandMailbox;
6226   unsigned long flags;
6227   unsigned char Channel, TargetID, LogicalDriveNumber;
6228   unsigned short LogicalDeviceNumber;
6229
6230   spin_lock_irqsave(&Controller->queue_lock, flags);
6231   while ((Command = DAC960_AllocateCommand(Controller)) == NULL)
6232     DAC960_WaitForCommand(Controller);
6233   spin_unlock_irqrestore(&Controller->queue_lock, flags);
6234   Controller->UserStatusLength = 0;
6235   DAC960_V2_ClearCommand(Command);
6236   Command->CommandType = DAC960_ImmediateCommand;
6237   CommandMailbox = &Command->V2.CommandMailbox;
6238   CommandMailbox->Common.CommandOpcode = DAC960_V2_IOCTL;
6239   CommandMailbox->Common.CommandControlBits.DataTransferControllerToHost = true;
6240   CommandMailbox->Common.CommandControlBits.NoAutoRequestSense = true;
6241   if (strcmp(UserCommand, "flush-cache") == 0)
6242     {
6243       CommandMailbox->DeviceOperation.IOCTL_Opcode = DAC960_V2_PauseDevice;
6244       CommandMailbox->DeviceOperation.OperationDevice =
6245         DAC960_V2_RAID_Controller;
6246       DAC960_ExecuteCommand(Command);
6247       DAC960_UserCritical("Cache Flush Completed\n", Controller);
6248     }
6249   else if (strncmp(UserCommand, "kill", 4) == 0 &&
6250            DAC960_ParsePhysicalDevice(Controller, &UserCommand[4],
6251                                       &Channel, &TargetID) &&
6252            DAC960_V2_TranslatePhysicalDevice(Command, Channel, TargetID,
6253                                              &LogicalDeviceNumber))
6254     {
6255       CommandMailbox->SetDeviceState.LogicalDevice.LogicalDeviceNumber =
6256         LogicalDeviceNumber;
6257       CommandMailbox->SetDeviceState.IOCTL_Opcode =
6258         DAC960_V2_SetDeviceState;
6259       CommandMailbox->SetDeviceState.DeviceState.PhysicalDeviceState =
6260         DAC960_V2_Device_Dead;
6261       DAC960_ExecuteCommand(Command);
6262       DAC960_UserCritical("Kill of Physical Device %d:%d %s\n",
6263                           Controller, Channel, TargetID,
6264                           (Command->V2.CommandStatus
6265                            == DAC960_V2_NormalCompletion
6266                            ? "Succeeded" : "Failed"));
6267     }
6268   else if (strncmp(UserCommand, "make-online", 11) == 0 &&
6269            DAC960_ParsePhysicalDevice(Controller, &UserCommand[11],
6270                                       &Channel, &TargetID) &&
6271            DAC960_V2_TranslatePhysicalDevice(Command, Channel, TargetID,
6272                                              &LogicalDeviceNumber))
6273     {
6274       CommandMailbox->SetDeviceState.LogicalDevice.LogicalDeviceNumber =
6275         LogicalDeviceNumber;
6276       CommandMailbox->SetDeviceState.IOCTL_Opcode =
6277         DAC960_V2_SetDeviceState;
6278       CommandMailbox->SetDeviceState.DeviceState.PhysicalDeviceState =
6279         DAC960_V2_Device_Online;
6280       DAC960_ExecuteCommand(Command);
6281       DAC960_UserCritical("Make Online of Physical Device %d:%d %s\n",
6282                           Controller, Channel, TargetID,
6283                           (Command->V2.CommandStatus
6284                            == DAC960_V2_NormalCompletion
6285                            ? "Succeeded" : "Failed"));
6286     }
6287   else if (strncmp(UserCommand, "make-standby", 12) == 0 &&
6288            DAC960_ParsePhysicalDevice(Controller, &UserCommand[12],
6289                                       &Channel, &TargetID) &&
6290            DAC960_V2_TranslatePhysicalDevice(Command, Channel, TargetID,
6291                                              &LogicalDeviceNumber))
6292     {
6293       CommandMailbox->SetDeviceState.LogicalDevice.LogicalDeviceNumber =
6294         LogicalDeviceNumber;
6295       CommandMailbox->SetDeviceState.IOCTL_Opcode =
6296         DAC960_V2_SetDeviceState;
6297       CommandMailbox->SetDeviceState.DeviceState.PhysicalDeviceState =
6298         DAC960_V2_Device_Standby;
6299       DAC960_ExecuteCommand(Command);
6300       DAC960_UserCritical("Make Standby of Physical Device %d:%d %s\n",
6301                           Controller, Channel, TargetID,
6302                           (Command->V2.CommandStatus
6303                            == DAC960_V2_NormalCompletion
6304                            ? "Succeeded" : "Failed"));
6305     }
6306   else if (strncmp(UserCommand, "rebuild", 7) == 0 &&
6307            DAC960_ParsePhysicalDevice(Controller, &UserCommand[7],
6308                                       &Channel, &TargetID) &&
6309            DAC960_V2_TranslatePhysicalDevice(Command, Channel, TargetID,
6310                                              &LogicalDeviceNumber))
6311     {
6312       CommandMailbox->LogicalDeviceInfo.LogicalDevice.LogicalDeviceNumber =
6313         LogicalDeviceNumber;
6314       CommandMailbox->LogicalDeviceInfo.IOCTL_Opcode =
6315         DAC960_V2_RebuildDeviceStart;
6316       DAC960_ExecuteCommand(Command);
6317       DAC960_UserCritical("Rebuild of Physical Device %d:%d %s\n",
6318                           Controller, Channel, TargetID,
6319                           (Command->V2.CommandStatus
6320                            == DAC960_V2_NormalCompletion
6321                            ? "Initiated" : "Not Initiated"));
6322     }
6323   else if (strncmp(UserCommand, "cancel-rebuild", 14) == 0 &&
6324            DAC960_ParsePhysicalDevice(Controller, &UserCommand[14],
6325                                       &Channel, &TargetID) &&
6326            DAC960_V2_TranslatePhysicalDevice(Command, Channel, TargetID,
6327                                              &LogicalDeviceNumber))
6328     {
6329       CommandMailbox->LogicalDeviceInfo.LogicalDevice.LogicalDeviceNumber =
6330         LogicalDeviceNumber;
6331       CommandMailbox->LogicalDeviceInfo.IOCTL_Opcode =
6332         DAC960_V2_RebuildDeviceStop;
6333       DAC960_ExecuteCommand(Command);
6334       DAC960_UserCritical("Rebuild of Physical Device %d:%d %s\n",
6335                           Controller, Channel, TargetID,
6336                           (Command->V2.CommandStatus
6337                            == DAC960_V2_NormalCompletion
6338                            ? "Cancelled" : "Not Cancelled"));
6339     }
6340   else if (strncmp(UserCommand, "check-consistency", 17) == 0 &&
6341            DAC960_ParseLogicalDrive(Controller, &UserCommand[17],
6342                                     &LogicalDriveNumber))
6343     {
6344       CommandMailbox->ConsistencyCheck.LogicalDevice.LogicalDeviceNumber =
6345         LogicalDriveNumber;
6346       CommandMailbox->ConsistencyCheck.IOCTL_Opcode =
6347         DAC960_V2_ConsistencyCheckStart;
6348       CommandMailbox->ConsistencyCheck.RestoreConsistency = true;
6349       CommandMailbox->ConsistencyCheck.InitializedAreaOnly = false;
6350       DAC960_ExecuteCommand(Command);
6351       DAC960_UserCritical("Consistency Check of Logical Drive %d "
6352                           "(/dev/rd/c%dd%d) %s\n",
6353                           Controller, LogicalDriveNumber,
6354                           Controller->ControllerNumber,
6355                           LogicalDriveNumber,
6356                           (Command->V2.CommandStatus
6357                            == DAC960_V2_NormalCompletion
6358                            ? "Initiated" : "Not Initiated"));
6359     }
6360   else if (strncmp(UserCommand, "cancel-consistency-check", 24) == 0 &&
6361            DAC960_ParseLogicalDrive(Controller, &UserCommand[24],
6362                                     &LogicalDriveNumber))
6363     {
6364       CommandMailbox->ConsistencyCheck.LogicalDevice.LogicalDeviceNumber =
6365         LogicalDriveNumber;
6366       CommandMailbox->ConsistencyCheck.IOCTL_Opcode =
6367         DAC960_V2_ConsistencyCheckStop;
6368       DAC960_ExecuteCommand(Command);
6369       DAC960_UserCritical("Consistency Check of Logical Drive %d "
6370                           "(/dev/rd/c%dd%d) %s\n",
6371                           Controller, LogicalDriveNumber,
6372                           Controller->ControllerNumber,
6373                           LogicalDriveNumber,
6374                           (Command->V2.CommandStatus
6375                            == DAC960_V2_NormalCompletion
6376                            ? "Cancelled" : "Not Cancelled"));
6377     }
6378   else if (strcmp(UserCommand, "perform-discovery") == 0)
6379     {
6380       CommandMailbox->Common.IOCTL_Opcode = DAC960_V2_StartDiscovery;
6381       DAC960_ExecuteCommand(Command);
6382       DAC960_UserCritical("Discovery %s\n", Controller,
6383                           (Command->V2.CommandStatus
6384                            == DAC960_V2_NormalCompletion
6385                            ? "Initiated" : "Not Initiated"));
6386       if (Command->V2.CommandStatus == DAC960_V2_NormalCompletion)
6387         {
6388           CommandMailbox->ControllerInfo.CommandOpcode = DAC960_V2_IOCTL;
6389           CommandMailbox->ControllerInfo.CommandControlBits
6390                                         .DataTransferControllerToHost = true;
6391           CommandMailbox->ControllerInfo.CommandControlBits
6392                                         .NoAutoRequestSense = true;
6393           CommandMailbox->ControllerInfo.DataTransferSize =
6394             sizeof(DAC960_V2_ControllerInfo_T);
6395           CommandMailbox->ControllerInfo.ControllerNumber = 0;
6396           CommandMailbox->ControllerInfo.IOCTL_Opcode =
6397             DAC960_V2_GetControllerInfo;
6398           /*
6399            * How does this NOT race with the queued Monitoring
6400            * usage of this structure?
6401            */
6402           CommandMailbox->ControllerInfo.DataTransferMemoryAddress
6403                                         .ScatterGatherSegments[0]
6404                                         .SegmentDataPointer =
6405             Controller->V2.NewControllerInformationDMA;
6406           CommandMailbox->ControllerInfo.DataTransferMemoryAddress
6407                                         .ScatterGatherSegments[0]
6408                                         .SegmentByteCount =
6409             CommandMailbox->ControllerInfo.DataTransferSize;
6410           DAC960_ExecuteCommand(Command);
6411           while (Controller->V2.NewControllerInformation->PhysicalScanActive)
6412             {
6413               DAC960_ExecuteCommand(Command);
6414               sleep_on_timeout(&Controller->CommandWaitQueue, HZ);
6415             }
6416           DAC960_UserCritical("Discovery Completed\n", Controller);
6417         }
6418     }
6419   else if (strcmp(UserCommand, "suppress-enclosure-messages") == 0)
6420     Controller->SuppressEnclosureMessages = true;
6421   else DAC960_UserCritical("Illegal User Command: '%s'\n",
6422                            Controller, UserCommand);
6423
6424   spin_lock_irqsave(&Controller->queue_lock, flags);
6425   DAC960_DeallocateCommand(Command);
6426   spin_unlock_irqrestore(&Controller->queue_lock, flags);
6427   return true;
6428 }
6429
6430 static int dac960_proc_show(struct seq_file *m, void *v)
6431 {
6432   unsigned char *StatusMessage = "OK\n";
6433   int ControllerNumber;
6434   for (ControllerNumber = 0;
6435        ControllerNumber < DAC960_ControllerCount;
6436        ControllerNumber++)
6437     {
6438       DAC960_Controller_T *Controller = DAC960_Controllers[ControllerNumber];
6439       if (Controller == NULL) continue;
6440       if (Controller->MonitoringAlertMode)
6441         {
6442           StatusMessage = "ALERT\n";
6443           break;
6444         }
6445     }
6446   seq_puts(m, StatusMessage);
6447   return 0;
6448 }
6449
6450 static int dac960_proc_open(struct inode *inode, struct file *file)
6451 {
6452         return single_open(file, dac960_proc_show, NULL);
6453 }
6454
6455 static const struct file_operations dac960_proc_fops = {
6456         .owner          = THIS_MODULE,
6457         .open           = dac960_proc_open,
6458         .read           = seq_read,
6459         .llseek         = seq_lseek,
6460         .release        = single_release,
6461 };
6462
6463 static int dac960_initial_status_proc_show(struct seq_file *m, void *v)
6464 {
6465         DAC960_Controller_T *Controller = (DAC960_Controller_T *)m->private;
6466         seq_printf(m, "%.*s", Controller->InitialStatusLength, Controller->CombinedStatusBuffer);
6467         return 0;
6468 }
6469
6470 static int dac960_initial_status_proc_open(struct inode *inode, struct file *file)
6471 {
6472         return single_open(file, dac960_initial_status_proc_show, PDE(inode)->data);
6473 }
6474
6475 static const struct file_operations dac960_initial_status_proc_fops = {
6476         .owner          = THIS_MODULE,
6477         .open           = dac960_initial_status_proc_open,
6478         .read           = seq_read,
6479         .llseek         = seq_lseek,
6480         .release        = single_release,
6481 };
6482
6483 static int dac960_current_status_proc_show(struct seq_file *m, void *v)
6484 {
6485   DAC960_Controller_T *Controller = (DAC960_Controller_T *) m->private;
6486   unsigned char *StatusMessage =
6487     "No Rebuild or Consistency Check in Progress\n";
6488   int ProgressMessageLength = strlen(StatusMessage);
6489   if (jiffies != Controller->LastCurrentStatusTime)
6490     {
6491       Controller->CurrentStatusLength = 0;
6492       DAC960_AnnounceDriver(Controller);
6493       DAC960_ReportControllerConfiguration(Controller);
6494       DAC960_ReportDeviceConfiguration(Controller);
6495       if (Controller->ProgressBufferLength > 0)
6496         ProgressMessageLength = Controller->ProgressBufferLength;
6497       if (DAC960_CheckStatusBuffer(Controller, 2 + ProgressMessageLength))
6498         {
6499           unsigned char *CurrentStatusBuffer = Controller->CurrentStatusBuffer;
6500           CurrentStatusBuffer[Controller->CurrentStatusLength++] = ' ';
6501           CurrentStatusBuffer[Controller->CurrentStatusLength++] = ' ';
6502           if (Controller->ProgressBufferLength > 0)
6503             strcpy(&CurrentStatusBuffer[Controller->CurrentStatusLength],
6504                    Controller->ProgressBuffer);
6505           else
6506             strcpy(&CurrentStatusBuffer[Controller->CurrentStatusLength],
6507                    StatusMessage);
6508           Controller->CurrentStatusLength += ProgressMessageLength;
6509         }
6510       Controller->LastCurrentStatusTime = jiffies;
6511     }
6512         seq_printf(m, "%.*s", Controller->CurrentStatusLength, Controller->CurrentStatusBuffer);
6513         return 0;
6514 }
6515
6516 static int dac960_current_status_proc_open(struct inode *inode, struct file *file)
6517 {
6518         return single_open(file, dac960_current_status_proc_show, PDE(inode)->data);
6519 }
6520
6521 static const struct file_operations dac960_current_status_proc_fops = {
6522         .owner          = THIS_MODULE,
6523         .open           = dac960_current_status_proc_open,
6524         .read           = seq_read,
6525         .llseek         = seq_lseek,
6526         .release        = single_release,
6527 };
6528
6529 static int dac960_user_command_proc_show(struct seq_file *m, void *v)
6530 {
6531         DAC960_Controller_T *Controller = (DAC960_Controller_T *)m->private;
6532
6533         seq_printf(m, "%.*s", Controller->UserStatusLength, Controller->UserStatusBuffer);
6534         return 0;
6535 }
6536
6537 static int dac960_user_command_proc_open(struct inode *inode, struct file *file)
6538 {
6539         return single_open(file, dac960_user_command_proc_show, PDE(inode)->data);
6540 }
6541
6542 static ssize_t dac960_user_command_proc_write(struct file *file,
6543                                        const char __user *Buffer,
6544                                        size_t Count, loff_t *pos)
6545 {
6546   DAC960_Controller_T *Controller = (DAC960_Controller_T *) PDE(file->f_path.dentry->d_inode)->data;
6547   unsigned char CommandBuffer[80];
6548   int Length;
6549   if (Count > sizeof(CommandBuffer)-1) return -EINVAL;
6550   if (copy_from_user(CommandBuffer, Buffer, Count)) return -EFAULT;
6551   CommandBuffer[Count] = '\0';
6552   Length = strlen(CommandBuffer);
6553   if (Length > 0 && CommandBuffer[Length-1] == '\n')
6554     CommandBuffer[--Length] = '\0';
6555   if (Controller->FirmwareType == DAC960_V1_Controller)
6556     return (DAC960_V1_ExecuteUserCommand(Controller, CommandBuffer)
6557             ? Count : -EBUSY);
6558   else
6559     return (DAC960_V2_ExecuteUserCommand(Controller, CommandBuffer)
6560             ? Count : -EBUSY);
6561 }
6562
6563 static const struct file_operations dac960_user_command_proc_fops = {
6564         .owner          = THIS_MODULE,
6565         .open           = dac960_user_command_proc_open,
6566         .read           = seq_read,
6567         .llseek         = seq_lseek,
6568         .release        = single_release,
6569         .write          = dac960_user_command_proc_write,
6570 };
6571
6572 /*
6573   DAC960_CreateProcEntries creates the /proc/rd/... entries for the
6574   DAC960 Driver.
6575 */
6576
6577 static void DAC960_CreateProcEntries(DAC960_Controller_T *Controller)
6578 {
6579         struct proc_dir_entry *StatusProcEntry;
6580         struct proc_dir_entry *ControllerProcEntry;
6581         struct proc_dir_entry *UserCommandProcEntry;
6582
6583         if (DAC960_ProcDirectoryEntry == NULL) {
6584                 DAC960_ProcDirectoryEntry = proc_mkdir("rd", NULL);
6585                 StatusProcEntry = proc_create("status", 0,
6586                                            DAC960_ProcDirectoryEntry,
6587                                            &dac960_proc_fops);
6588         }
6589
6590       sprintf(Controller->ControllerName, "c%d", Controller->ControllerNumber);
6591       ControllerProcEntry = proc_mkdir(Controller->ControllerName,
6592                                        DAC960_ProcDirectoryEntry);
6593       proc_create_data("initial_status", 0, ControllerProcEntry, &dac960_initial_status_proc_fops, Controller);
6594       proc_create_data("current_status", 0, ControllerProcEntry, &dac960_current_status_proc_fops, Controller);
6595       UserCommandProcEntry = proc_create_data("user_command", S_IWUSR | S_IRUSR, ControllerProcEntry, &dac960_user_command_proc_fops, Controller);
6596       Controller->ControllerProcEntry = ControllerProcEntry;
6597 }
6598
6599
6600 /*
6601   DAC960_DestroyProcEntries destroys the /proc/rd/... entries for the
6602   DAC960 Driver.
6603 */
6604
6605 static void DAC960_DestroyProcEntries(DAC960_Controller_T *Controller)
6606 {
6607       if (Controller->ControllerProcEntry == NULL)
6608               return;
6609       remove_proc_entry("initial_status", Controller->ControllerProcEntry);
6610       remove_proc_entry("current_status", Controller->ControllerProcEntry);
6611       remove_proc_entry("user_command", Controller->ControllerProcEntry);
6612       remove_proc_entry(Controller->ControllerName, DAC960_ProcDirectoryEntry);
6613       Controller->ControllerProcEntry = NULL;
6614 }
6615
6616 #ifdef DAC960_GAM_MINOR
6617
6618 /*
6619  * DAC960_gam_ioctl is the ioctl function for performing RAID operations.
6620 */
6621
6622 static long DAC960_gam_ioctl(struct file *file, unsigned int Request,
6623                                                 unsigned long Argument)
6624 {
6625   long ErrorCode = 0;
6626   if (!capable(CAP_SYS_ADMIN)) return -EACCES;
6627
6628   lock_kernel();
6629   switch (Request)
6630     {
6631     case DAC960_IOCTL_GET_CONTROLLER_COUNT:
6632       ErrorCode = DAC960_ControllerCount;
6633       break;
6634     case DAC960_IOCTL_GET_CONTROLLER_INFO:
6635       {
6636         DAC960_ControllerInfo_T __user *UserSpaceControllerInfo =
6637           (DAC960_ControllerInfo_T __user *) Argument;
6638         DAC960_ControllerInfo_T ControllerInfo;
6639         DAC960_Controller_T *Controller;
6640         int ControllerNumber;
6641         if (UserSpaceControllerInfo == NULL)
6642                 ErrorCode = -EINVAL;
6643         else ErrorCode = get_user(ControllerNumber,
6644                              &UserSpaceControllerInfo->ControllerNumber);
6645         if (ErrorCode != 0)
6646                 break;
6647         ErrorCode = -ENXIO;
6648         if (ControllerNumber < 0 ||
6649             ControllerNumber > DAC960_ControllerCount - 1) {
6650           break;
6651         }
6652         Controller = DAC960_Controllers[ControllerNumber];
6653         if (Controller == NULL)
6654                 break;
6655         memset(&ControllerInfo, 0, sizeof(DAC960_ControllerInfo_T));
6656         ControllerInfo.ControllerNumber = ControllerNumber;
6657         ControllerInfo.FirmwareType = Controller->FirmwareType;
6658         ControllerInfo.Channels = Controller->Channels;
6659         ControllerInfo.Targets = Controller->Targets;
6660         ControllerInfo.PCI_Bus = Controller->Bus;
6661         ControllerInfo.PCI_Device = Controller->Device;
6662         ControllerInfo.PCI_Function = Controller->Function;
6663         ControllerInfo.IRQ_Channel = Controller->IRQ_Channel;
6664         ControllerInfo.PCI_Address = Controller->PCI_Address;
6665         strcpy(ControllerInfo.ModelName, Controller->ModelName);
6666         strcpy(ControllerInfo.FirmwareVersion, Controller->FirmwareVersion);
6667         ErrorCode = (copy_to_user(UserSpaceControllerInfo, &ControllerInfo,
6668                              sizeof(DAC960_ControllerInfo_T)) ? -EFAULT : 0);
6669         break;
6670       }
6671     case DAC960_IOCTL_V1_EXECUTE_COMMAND:
6672       {
6673         DAC960_V1_UserCommand_T __user *UserSpaceUserCommand =
6674           (DAC960_V1_UserCommand_T __user *) Argument;
6675         DAC960_V1_UserCommand_T UserCommand;
6676         DAC960_Controller_T *Controller;
6677         DAC960_Command_T *Command = NULL;
6678         DAC960_V1_CommandOpcode_T CommandOpcode;
6679         DAC960_V1_CommandStatus_T CommandStatus;
6680         DAC960_V1_DCDB_T DCDB;
6681         DAC960_V1_DCDB_T *DCDB_IOBUF = NULL;
6682         dma_addr_t      DCDB_IOBUFDMA;
6683         unsigned long flags;
6684         int ControllerNumber, DataTransferLength;
6685         unsigned char *DataTransferBuffer = NULL;
6686         dma_addr_t DataTransferBufferDMA;
6687         if (UserSpaceUserCommand == NULL) {
6688                 ErrorCode = -EINVAL;
6689                 break;
6690         }
6691         if (copy_from_user(&UserCommand, UserSpaceUserCommand,
6692                                    sizeof(DAC960_V1_UserCommand_T))) {
6693                 ErrorCode = -EFAULT;
6694                 break;
6695         }
6696         ControllerNumber = UserCommand.ControllerNumber;
6697         ErrorCode = -ENXIO;
6698         if (ControllerNumber < 0 ||
6699             ControllerNumber > DAC960_ControllerCount - 1)
6700                 break;
6701         Controller = DAC960_Controllers[ControllerNumber];
6702         if (Controller == NULL)
6703                 break;
6704         ErrorCode = -EINVAL;
6705         if (Controller->FirmwareType != DAC960_V1_Controller)
6706                 break;
6707         CommandOpcode = UserCommand.CommandMailbox.Common.CommandOpcode;
6708         DataTransferLength = UserCommand.DataTransferLength;
6709         if (CommandOpcode & 0x80)
6710                 break;
6711         if (CommandOpcode == DAC960_V1_DCDB)
6712           {
6713             if (copy_from_user(&DCDB, UserCommand.DCDB,
6714                                sizeof(DAC960_V1_DCDB_T))) {
6715                 ErrorCode = -EFAULT;
6716                 break;
6717             }
6718             if (DCDB.Channel >= DAC960_V1_MaxChannels)
6719                         break;
6720             if (!((DataTransferLength == 0 &&
6721                    DCDB.Direction
6722                    == DAC960_V1_DCDB_NoDataTransfer) ||
6723                   (DataTransferLength > 0 &&
6724                    DCDB.Direction
6725                    == DAC960_V1_DCDB_DataTransferDeviceToSystem) ||
6726                   (DataTransferLength < 0 &&
6727                    DCDB.Direction
6728                    == DAC960_V1_DCDB_DataTransferSystemToDevice)))
6729                         break;
6730             if (((DCDB.TransferLengthHigh4 << 16) | DCDB.TransferLength)
6731                 != abs(DataTransferLength))
6732                         break;
6733             DCDB_IOBUF = pci_alloc_consistent(Controller->PCIDevice,
6734                         sizeof(DAC960_V1_DCDB_T), &DCDB_IOBUFDMA);
6735             if (DCDB_IOBUF == NULL) {
6736                         ErrorCode = -ENOMEM;
6737                         break;
6738                 }
6739           }
6740         ErrorCode = -ENOMEM;
6741         if (DataTransferLength > 0)
6742           {
6743             DataTransferBuffer = pci_alloc_consistent(Controller->PCIDevice,
6744                                 DataTransferLength, &DataTransferBufferDMA);
6745             if (DataTransferBuffer == NULL)
6746                 break;
6747             memset(DataTransferBuffer, 0, DataTransferLength);
6748           }
6749         else if (DataTransferLength < 0)
6750           {
6751             DataTransferBuffer = pci_alloc_consistent(Controller->PCIDevice,
6752                                 -DataTransferLength, &DataTransferBufferDMA);
6753             if (DataTransferBuffer == NULL)
6754                 break;
6755             if (copy_from_user(DataTransferBuffer,
6756                                UserCommand.DataTransferBuffer,
6757                                -DataTransferLength)) {
6758                 ErrorCode = -EFAULT;
6759                 break;
6760             }
6761           }
6762         if (CommandOpcode == DAC960_V1_DCDB)
6763           {
6764             spin_lock_irqsave(&Controller->queue_lock, flags);
6765             while ((Command = DAC960_AllocateCommand(Controller)) == NULL)
6766               DAC960_WaitForCommand(Controller);
6767             while (Controller->V1.DirectCommandActive[DCDB.Channel]
6768                                                      [DCDB.TargetID])
6769               {
6770                 spin_unlock_irq(&Controller->queue_lock);
6771                 __wait_event(Controller->CommandWaitQueue,
6772                              !Controller->V1.DirectCommandActive
6773                                              [DCDB.Channel][DCDB.TargetID]);
6774                 spin_lock_irq(&Controller->queue_lock);
6775               }
6776             Controller->V1.DirectCommandActive[DCDB.Channel]
6777                                               [DCDB.TargetID] = true;
6778             spin_unlock_irqrestore(&Controller->queue_lock, flags);
6779             DAC960_V1_ClearCommand(Command);
6780             Command->CommandType = DAC960_ImmediateCommand;
6781             memcpy(&Command->V1.CommandMailbox, &UserCommand.CommandMailbox,
6782                    sizeof(DAC960_V1_CommandMailbox_T));
6783             Command->V1.CommandMailbox.Type3.BusAddress = DCDB_IOBUFDMA;
6784             DCDB.BusAddress = DataTransferBufferDMA;
6785             memcpy(DCDB_IOBUF, &DCDB, sizeof(DAC960_V1_DCDB_T));
6786           }
6787         else
6788           {
6789             spin_lock_irqsave(&Controller->queue_lock, flags);
6790             while ((Command = DAC960_AllocateCommand(Controller)) == NULL)
6791               DAC960_WaitForCommand(Controller);
6792             spin_unlock_irqrestore(&Controller->queue_lock, flags);
6793             DAC960_V1_ClearCommand(Command);
6794             Command->CommandType = DAC960_ImmediateCommand;
6795             memcpy(&Command->V1.CommandMailbox, &UserCommand.CommandMailbox,
6796                    sizeof(DAC960_V1_CommandMailbox_T));
6797             if (DataTransferBuffer != NULL)
6798               Command->V1.CommandMailbox.Type3.BusAddress =
6799                 DataTransferBufferDMA;
6800           }
6801         DAC960_ExecuteCommand(Command);
6802         CommandStatus = Command->V1.CommandStatus;
6803         spin_lock_irqsave(&Controller->queue_lock, flags);
6804         DAC960_DeallocateCommand(Command);
6805         spin_unlock_irqrestore(&Controller->queue_lock, flags);
6806         if (DataTransferLength > 0)
6807           {
6808             if (copy_to_user(UserCommand.DataTransferBuffer,
6809                              DataTransferBuffer, DataTransferLength)) {
6810                 ErrorCode = -EFAULT;
6811                 goto Failure1;
6812             }
6813           }
6814         if (CommandOpcode == DAC960_V1_DCDB)
6815           {
6816             /*
6817               I don't believe Target or Channel in the DCDB_IOBUF
6818               should be any different from the contents of DCDB.
6819              */
6820             Controller->V1.DirectCommandActive[DCDB.Channel]
6821                                               [DCDB.TargetID] = false;
6822             if (copy_to_user(UserCommand.DCDB, DCDB_IOBUF,
6823                              sizeof(DAC960_V1_DCDB_T))) {
6824                 ErrorCode = -EFAULT;
6825                 goto Failure1;
6826             }
6827           }
6828         ErrorCode = CommandStatus;
6829       Failure1:
6830         if (DataTransferBuffer != NULL)
6831           pci_free_consistent(Controller->PCIDevice, abs(DataTransferLength),
6832                         DataTransferBuffer, DataTransferBufferDMA);
6833         if (DCDB_IOBUF != NULL)
6834           pci_free_consistent(Controller->PCIDevice, sizeof(DAC960_V1_DCDB_T),
6835                         DCDB_IOBUF, DCDB_IOBUFDMA);
6836         break;
6837       }
6838     case DAC960_IOCTL_V2_EXECUTE_COMMAND:
6839       {
6840         DAC960_V2_UserCommand_T __user *UserSpaceUserCommand =
6841           (DAC960_V2_UserCommand_T __user *) Argument;
6842         DAC960_V2_UserCommand_T UserCommand;
6843         DAC960_Controller_T *Controller;
6844         DAC960_Command_T *Command = NULL;
6845         DAC960_V2_CommandMailbox_T *CommandMailbox;
6846         DAC960_V2_CommandStatus_T CommandStatus;
6847         unsigned long flags;
6848         int ControllerNumber, DataTransferLength;
6849         int DataTransferResidue, RequestSenseLength;
6850         unsigned char *DataTransferBuffer = NULL;
6851         dma_addr_t DataTransferBufferDMA;
6852         unsigned char *RequestSenseBuffer = NULL;
6853         dma_addr_t RequestSenseBufferDMA;
6854
6855         ErrorCode = -EINVAL;
6856         if (UserSpaceUserCommand == NULL)
6857                 break;
6858         if (copy_from_user(&UserCommand, UserSpaceUserCommand,
6859                            sizeof(DAC960_V2_UserCommand_T))) {
6860                 ErrorCode = -EFAULT;
6861                 break;
6862         }
6863         ErrorCode = -ENXIO;
6864         ControllerNumber = UserCommand.ControllerNumber;
6865         if (ControllerNumber < 0 ||
6866             ControllerNumber > DAC960_ControllerCount - 1)
6867                 break;
6868         Controller = DAC960_Controllers[ControllerNumber];
6869         if (Controller == NULL)
6870                 break;
6871         if (Controller->FirmwareType != DAC960_V2_Controller){
6872                 ErrorCode = -EINVAL;
6873                 break;
6874         }
6875         DataTransferLength = UserCommand.DataTransferLength;
6876         ErrorCode = -ENOMEM;
6877         if (DataTransferLength > 0)
6878           {
6879             DataTransferBuffer = pci_alloc_consistent(Controller->PCIDevice,
6880                                 DataTransferLength, &DataTransferBufferDMA);
6881             if (DataTransferBuffer == NULL)
6882                 break;
6883             memset(DataTransferBuffer, 0, DataTransferLength);
6884           }
6885         else if (DataTransferLength < 0)
6886           {
6887             DataTransferBuffer = pci_alloc_consistent(Controller->PCIDevice,
6888                                 -DataTransferLength, &DataTransferBufferDMA);
6889             if (DataTransferBuffer == NULL)
6890                 break;
6891             if (copy_from_user(DataTransferBuffer,
6892                                UserCommand.DataTransferBuffer,
6893                                -DataTransferLength)) {
6894                 ErrorCode = -EFAULT;
6895                 goto Failure2;
6896             }
6897           }
6898         RequestSenseLength = UserCommand.RequestSenseLength;
6899         if (RequestSenseLength > 0)
6900           {
6901             RequestSenseBuffer = pci_alloc_consistent(Controller->PCIDevice,
6902                         RequestSenseLength, &RequestSenseBufferDMA);
6903             if (RequestSenseBuffer == NULL)
6904               {
6905                 ErrorCode = -ENOMEM;
6906                 goto Failure2;
6907               }
6908             memset(RequestSenseBuffer, 0, RequestSenseLength);
6909           }
6910         spin_lock_irqsave(&Controller->queue_lock, flags);
6911         while ((Command = DAC960_AllocateCommand(Controller)) == NULL)
6912           DAC960_WaitForCommand(Controller);
6913         spin_unlock_irqrestore(&Controller->queue_lock, flags);
6914         DAC960_V2_ClearCommand(Command);
6915         Command->CommandType = DAC960_ImmediateCommand;
6916         CommandMailbox = &Command->V2.CommandMailbox;
6917         memcpy(CommandMailbox, &UserCommand.CommandMailbox,
6918                sizeof(DAC960_V2_CommandMailbox_T));
6919         CommandMailbox->Common.CommandControlBits
6920                               .AdditionalScatterGatherListMemory = false;
6921         CommandMailbox->Common.CommandControlBits
6922                               .NoAutoRequestSense = true;
6923         CommandMailbox->Common.DataTransferSize = 0;
6924         CommandMailbox->Common.DataTransferPageNumber = 0;
6925         memset(&CommandMailbox->Common.DataTransferMemoryAddress, 0,
6926                sizeof(DAC960_V2_DataTransferMemoryAddress_T));
6927         if (DataTransferLength != 0)
6928           {
6929             if (DataTransferLength > 0)
6930               {
6931                 CommandMailbox->Common.CommandControlBits
6932                                       .DataTransferControllerToHost = true;
6933                 CommandMailbox->Common.DataTransferSize = DataTransferLength;
6934               }
6935             else
6936               {
6937                 CommandMailbox->Common.CommandControlBits
6938                                       .DataTransferControllerToHost = false;
6939                 CommandMailbox->Common.DataTransferSize = -DataTransferLength;
6940               }
6941             CommandMailbox->Common.DataTransferMemoryAddress
6942                                   .ScatterGatherSegments[0]
6943                                   .SegmentDataPointer = DataTransferBufferDMA;
6944             CommandMailbox->Common.DataTransferMemoryAddress
6945                                   .ScatterGatherSegments[0]
6946                                   .SegmentByteCount =
6947               CommandMailbox->Common.DataTransferSize;
6948           }
6949         if (RequestSenseLength > 0)
6950           {
6951             CommandMailbox->Common.CommandControlBits
6952                                   .NoAutoRequestSense = false;
6953             CommandMailbox->Common.RequestSenseSize = RequestSenseLength;
6954             CommandMailbox->Common.RequestSenseBusAddress =
6955                                                         RequestSenseBufferDMA;
6956           }
6957         DAC960_ExecuteCommand(Command);
6958         CommandStatus = Command->V2.CommandStatus;
6959         RequestSenseLength = Command->V2.RequestSenseLength;
6960         DataTransferResidue = Command->V2.DataTransferResidue;
6961         spin_lock_irqsave(&Controller->queue_lock, flags);
6962         DAC960_DeallocateCommand(Command);
6963         spin_unlock_irqrestore(&Controller->queue_lock, flags);
6964         if (RequestSenseLength > UserCommand.RequestSenseLength)
6965           RequestSenseLength = UserCommand.RequestSenseLength;
6966         if (copy_to_user(&UserSpaceUserCommand->DataTransferLength,
6967                                  &DataTransferResidue,
6968                                  sizeof(DataTransferResidue))) {
6969                 ErrorCode = -EFAULT;
6970                 goto Failure2;
6971         }
6972         if (copy_to_user(&UserSpaceUserCommand->RequestSenseLength,
6973                          &RequestSenseLength, sizeof(RequestSenseLength))) {
6974                 ErrorCode = -EFAULT;
6975                 goto Failure2;
6976         }
6977         if (DataTransferLength > 0)
6978           {
6979             if (copy_to_user(UserCommand.DataTransferBuffer,
6980                              DataTransferBuffer, DataTransferLength)) {
6981                 ErrorCode = -EFAULT;
6982                 goto Failure2;
6983             }
6984           }
6985         if (RequestSenseLength > 0)
6986           {
6987             if (copy_to_user(UserCommand.RequestSenseBuffer,
6988                              RequestSenseBuffer, RequestSenseLength)) {
6989                 ErrorCode = -EFAULT;
6990                 goto Failure2;
6991             }
6992           }
6993         ErrorCode = CommandStatus;
6994       Failure2:
6995           pci_free_consistent(Controller->PCIDevice, abs(DataTransferLength),
6996                 DataTransferBuffer, DataTransferBufferDMA);
6997         if (RequestSenseBuffer != NULL)
6998           pci_free_consistent(Controller->PCIDevice, RequestSenseLength,
6999                 RequestSenseBuffer, RequestSenseBufferDMA);
7000         break;
7001       }
7002     case DAC960_IOCTL_V2_GET_HEALTH_STATUS:
7003       {
7004         DAC960_V2_GetHealthStatus_T __user *UserSpaceGetHealthStatus =
7005           (DAC960_V2_GetHealthStatus_T __user *) Argument;
7006         DAC960_V2_GetHealthStatus_T GetHealthStatus;
7007         DAC960_V2_HealthStatusBuffer_T HealthStatusBuffer;
7008         DAC960_Controller_T *Controller;
7009         int ControllerNumber;
7010         if (UserSpaceGetHealthStatus == NULL) {
7011                 ErrorCode = -EINVAL;
7012                 break;
7013         }
7014         if (copy_from_user(&GetHealthStatus, UserSpaceGetHealthStatus,
7015                            sizeof(DAC960_V2_GetHealthStatus_T))) {
7016                 ErrorCode = -EFAULT;
7017                 break;
7018         }
7019         ErrorCode = -ENXIO;
7020         ControllerNumber = GetHealthStatus.ControllerNumber;
7021         if (ControllerNumber < 0 ||
7022             ControllerNumber > DAC960_ControllerCount - 1)
7023                     break;
7024         Controller = DAC960_Controllers[ControllerNumber];
7025         if (Controller == NULL)
7026                 break;
7027         if (Controller->FirmwareType != DAC960_V2_Controller) {
7028                 ErrorCode = -EINVAL;
7029                 break;
7030         }
7031         if (copy_from_user(&HealthStatusBuffer,
7032                            GetHealthStatus.HealthStatusBuffer,
7033                            sizeof(DAC960_V2_HealthStatusBuffer_T))) {
7034                 ErrorCode = -EFAULT;
7035                 break;
7036         }
7037         while (Controller->V2.HealthStatusBuffer->StatusChangeCounter
7038                == HealthStatusBuffer.StatusChangeCounter &&
7039                Controller->V2.HealthStatusBuffer->NextEventSequenceNumber
7040                == HealthStatusBuffer.NextEventSequenceNumber)
7041           {
7042             interruptible_sleep_on_timeout(&Controller->HealthStatusWaitQueue,
7043                                            DAC960_MonitoringTimerInterval);
7044             if (signal_pending(current)) {
7045                 ErrorCode = -EINTR;
7046                 break;
7047             }
7048           }
7049         if (copy_to_user(GetHealthStatus.HealthStatusBuffer,
7050                          Controller->V2.HealthStatusBuffer,
7051                          sizeof(DAC960_V2_HealthStatusBuffer_T)))
7052                 ErrorCode = -EFAULT;
7053         else
7054                 ErrorCode =  0;
7055       }
7056       default:
7057         ErrorCode = -ENOTTY;
7058     }
7059   unlock_kernel();
7060   return ErrorCode;
7061 }
7062
7063 static const struct file_operations DAC960_gam_fops = {
7064         .owner          = THIS_MODULE,
7065         .unlocked_ioctl = DAC960_gam_ioctl
7066 };
7067
7068 static struct miscdevice DAC960_gam_dev = {
7069         DAC960_GAM_MINOR,
7070         "dac960_gam",
7071         &DAC960_gam_fops
7072 };
7073
7074 static int DAC960_gam_init(void)
7075 {
7076         int ret;
7077
7078         ret = misc_register(&DAC960_gam_dev);
7079         if (ret)
7080                 printk(KERN_ERR "DAC960_gam: can't misc_register on minor %d\n", DAC960_GAM_MINOR);
7081         return ret;
7082 }
7083
7084 static void DAC960_gam_cleanup(void)
7085 {
7086         misc_deregister(&DAC960_gam_dev);
7087 }
7088
7089 #endif /* DAC960_GAM_MINOR */
7090
7091 static struct DAC960_privdata DAC960_GEM_privdata = {
7092         .HardwareType =         DAC960_GEM_Controller,
7093         .FirmwareType   =       DAC960_V2_Controller,
7094         .InterruptHandler =     DAC960_GEM_InterruptHandler,
7095         .MemoryWindowSize =     DAC960_GEM_RegisterWindowSize,
7096 };
7097
7098
7099 static struct DAC960_privdata DAC960_BA_privdata = {
7100         .HardwareType =         DAC960_BA_Controller,
7101         .FirmwareType   =       DAC960_V2_Controller,
7102         .InterruptHandler =     DAC960_BA_InterruptHandler,
7103         .MemoryWindowSize =     DAC960_BA_RegisterWindowSize,
7104 };
7105
7106 static struct DAC960_privdata DAC960_LP_privdata = {
7107         .HardwareType =         DAC960_LP_Controller,
7108         .FirmwareType   =       DAC960_V2_Controller,
7109         .InterruptHandler =     DAC960_LP_InterruptHandler,
7110         .MemoryWindowSize =     DAC960_LP_RegisterWindowSize,
7111 };
7112
7113 static struct DAC960_privdata DAC960_LA_privdata = {
7114         .HardwareType =         DAC960_LA_Controller,
7115         .FirmwareType   =       DAC960_V1_Controller,
7116         .InterruptHandler =     DAC960_LA_InterruptHandler,
7117         .MemoryWindowSize =     DAC960_LA_RegisterWindowSize,
7118 };
7119
7120 static struct DAC960_privdata DAC960_PG_privdata = {
7121         .HardwareType =         DAC960_PG_Controller,
7122         .FirmwareType   =       DAC960_V1_Controller,
7123         .InterruptHandler =     DAC960_PG_InterruptHandler,
7124         .MemoryWindowSize =     DAC960_PG_RegisterWindowSize,
7125 };
7126
7127 static struct DAC960_privdata DAC960_PD_privdata = {
7128         .HardwareType =         DAC960_PD_Controller,
7129         .FirmwareType   =       DAC960_V1_Controller,
7130         .InterruptHandler =     DAC960_PD_InterruptHandler,
7131         .MemoryWindowSize =     DAC960_PD_RegisterWindowSize,
7132 };
7133
7134 static struct DAC960_privdata DAC960_P_privdata = {
7135         .HardwareType =         DAC960_P_Controller,
7136         .FirmwareType   =       DAC960_V1_Controller,
7137         .InterruptHandler =     DAC960_P_InterruptHandler,
7138         .MemoryWindowSize =     DAC960_PD_RegisterWindowSize,
7139 };
7140
7141 static const struct pci_device_id DAC960_id_table[] = {
7142         {
7143                 .vendor         = PCI_VENDOR_ID_MYLEX,
7144                 .device         = PCI_DEVICE_ID_MYLEX_DAC960_GEM,
7145                 .subvendor      = PCI_VENDOR_ID_MYLEX,
7146                 .subdevice      = PCI_ANY_ID,
7147                 .driver_data    = (unsigned long) &DAC960_GEM_privdata,
7148         },
7149         {
7150                 .vendor         = PCI_VENDOR_ID_MYLEX,
7151                 .device         = PCI_DEVICE_ID_MYLEX_DAC960_BA,
7152                 .subvendor      = PCI_ANY_ID,
7153                 .subdevice      = PCI_ANY_ID,
7154                 .driver_data    = (unsigned long) &DAC960_BA_privdata,
7155         },
7156         {
7157                 .vendor         = PCI_VENDOR_ID_MYLEX,
7158                 .device         = PCI_DEVICE_ID_MYLEX_DAC960_LP,
7159                 .subvendor      = PCI_ANY_ID,
7160                 .subdevice      = PCI_ANY_ID,
7161                 .driver_data    = (unsigned long) &DAC960_LP_privdata,
7162         },
7163         {
7164                 .vendor         = PCI_VENDOR_ID_DEC,
7165                 .device         = PCI_DEVICE_ID_DEC_21285,
7166                 .subvendor      = PCI_VENDOR_ID_MYLEX,
7167                 .subdevice      = PCI_DEVICE_ID_MYLEX_DAC960_LA,
7168                 .driver_data    = (unsigned long) &DAC960_LA_privdata,
7169         },
7170         {
7171                 .vendor         = PCI_VENDOR_ID_MYLEX,
7172                 .device         = PCI_DEVICE_ID_MYLEX_DAC960_PG,
7173                 .subvendor      = PCI_ANY_ID,
7174                 .subdevice      = PCI_ANY_ID,
7175                 .driver_data    = (unsigned long) &DAC960_PG_privdata,
7176         },
7177         {
7178                 .vendor         = PCI_VENDOR_ID_MYLEX,
7179                 .device         = PCI_DEVICE_ID_MYLEX_DAC960_PD,
7180                 .subvendor      = PCI_ANY_ID,
7181                 .subdevice      = PCI_ANY_ID,
7182                 .driver_data    = (unsigned long) &DAC960_PD_privdata,
7183         },
7184         {
7185                 .vendor         = PCI_VENDOR_ID_MYLEX,
7186                 .device         = PCI_DEVICE_ID_MYLEX_DAC960_P,
7187                 .subvendor      = PCI_ANY_ID,
7188                 .subdevice      = PCI_ANY_ID,
7189                 .driver_data    = (unsigned long) &DAC960_P_privdata,
7190         },
7191         {0, },
7192 };
7193
7194 MODULE_DEVICE_TABLE(pci, DAC960_id_table);
7195
7196 static struct pci_driver DAC960_pci_driver = {
7197         .name           = "DAC960",
7198         .id_table       = DAC960_id_table,
7199         .probe          = DAC960_Probe,
7200         .remove         = DAC960_Remove,
7201 };
7202
7203 static int __init DAC960_init_module(void)
7204 {
7205         int ret;
7206
7207         ret =  pci_register_driver(&DAC960_pci_driver);
7208 #ifdef DAC960_GAM_MINOR
7209         if (!ret)
7210                 DAC960_gam_init();
7211 #endif
7212         return ret;
7213 }
7214
7215 static void __exit DAC960_cleanup_module(void)
7216 {
7217         int i;
7218
7219 #ifdef DAC960_GAM_MINOR
7220         DAC960_gam_cleanup();
7221 #endif
7222
7223         for (i = 0; i < DAC960_ControllerCount; i++) {
7224                 DAC960_Controller_T *Controller = DAC960_Controllers[i];
7225                 if (Controller == NULL)
7226                         continue;
7227                 DAC960_FinalizeController(Controller);
7228         }
7229         if (DAC960_ProcDirectoryEntry != NULL) {
7230                 remove_proc_entry("rd/status", NULL);
7231                 remove_proc_entry("rd", NULL);
7232         }
7233         DAC960_ControllerCount = 0;
7234         pci_unregister_driver(&DAC960_pci_driver);
7235 }
7236
7237 module_init(DAC960_init_module);
7238 module_exit(DAC960_cleanup_module);
7239
7240 MODULE_LICENSE("GPL");