drivers/block/DAC960.c

   1 /*
   2
   3   Linux Driver for Mylex DAC960/AcceleRAID/eXtremeRAID PCI RAID Controllers
   4
   5   Copyright 1998-2001 by Leonard N. Zubkoff <lnz@dandelion.com>
   6   Portions Copyright 2002 by Mylex (An IBM Business Unit)
   7
   8   This program is free software; you may redistribute and/or modify it under
   9   the terms of the GNU General Public License Version 2 as published by the
  10   Free Software Foundation.
  11
  12   This program is distributed in the hope that it will be useful, but
  13   WITHOUT ANY WARRANTY, without even the implied warranty of MERCHANTABILITY
  14   or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
  15   for complete details.
  16
  17 */
  18
  19
  20 #define DAC960_DriverVersion                    "2.5.49"
  21 #define DAC960_DriverDate                       "21 Aug 2007"
  22
  23
  24 #include <linux/module.h>
  25 #include <linux/types.h>
  26 #include <linux/miscdevice.h>
  27 #include <linux/blkdev.h>
  28 #include <linux/bio.h>
  29 #include <linux/completion.h>
  30 #include <linux/delay.h>
  31 #include <linux/genhd.h>
  32 #include <linux/hdreg.h>
  33 #include <linux/blkpg.h>
  34 #include <linux/dma-mapping.h>
  35 #include <linux/interrupt.h>
  36 #include <linux/ioport.h>
  37 #include <linux/mm.h>
  38 #include <linux/slab.h>
  39 #include <linux/mutex.h>
  40 #include <linux/proc_fs.h>
  41 #include <linux/seq_file.h>
  42 #include <linux/reboot.h>
  43 #include <linux/spinlock.h>
  44 #include <linux/timer.h>
  45 #include <linux/pci.h>
  46 #include <linux/init.h>
  47 #include <linux/jiffies.h>
  48 #include <linux/random.h>
  49 #include <linux/scatterlist.h>
  50 #include <asm/io.h>
  51 #include <asm/uaccess.h>
  52 #include "DAC960.h"
  53
  54 #define DAC960_GAM_MINOR        252
  55
  56
  57 static DEFINE_MUTEX(DAC960_mutex);
  58 static DAC960_Controller_T *DAC960_Controllers[DAC960_MaxControllers];
  59 static int DAC960_ControllerCount;
  60 static struct proc_dir_entry *DAC960_ProcDirectoryEntry;
  61
  62 static long disk_size(DAC960_Controller_T *p, int drive_nr)
  63 {
  64         if (p->FirmwareType == DAC960_V1_Controller) {
  65                 if (drive_nr >= p->LogicalDriveCount)
  66                         return 0;
  67                 return p->V1.LogicalDriveInformation[drive_nr].
  68                         LogicalDriveSize;
  69         } else {
  70                 DAC960_V2_LogicalDeviceInfo_T *i =
  71                         p->V2.LogicalDeviceInformation[drive_nr];
  72                 if (i == NULL)
  73                         return 0;
  74                 return i->ConfigurableDeviceSize;
  75         }
  76 }
  77
  78 static int DAC960_open(struct block_device *bdev, fmode_t mode)
  79 {
  80         struct gendisk *disk = bdev->bd_disk;
  81         DAC960_Controller_T *p = disk->queue->queuedata;
  82         int drive_nr = (long)disk->private_data;
  83         int ret = -ENXIO;
  84
  85         mutex_lock(&DAC960_mutex);
  86         if (p->FirmwareType == DAC960_V1_Controller) {
  87                 if (p->V1.LogicalDriveInformation[drive_nr].
  88                     LogicalDriveState == DAC960_V1_LogicalDrive_Offline)
  89                         goto out;
  90         } else {
  91                 DAC960_V2_LogicalDeviceInfo_T *i =
  92                         p->V2.LogicalDeviceInformation[drive_nr];
  93                 if (!i || i->LogicalDeviceState == DAC960_V2_LogicalDevice_Offline)
  94                         goto out;
  95         }
  96
  97         check_disk_change(bdev);
  98
  99         if (!get_capacity(p->disks[drive_nr]))
 100                 goto out;
 101         ret = 0;
 102 out:
 103         mutex_unlock(&DAC960_mutex);
 104         return ret;
 105 }
 106
 107 static int DAC960_getgeo(struct block_device *bdev, struct hd_geometry *geo)
 108 {
 109         struct gendisk *disk = bdev->bd_disk;
 110         DAC960_Controller_T *p = disk->queue->queuedata;
 111         int drive_nr = (long)disk->private_data;
 112
 113         if (p->FirmwareType == DAC960_V1_Controller) {
 114                 geo->heads = p->V1.GeometryTranslationHeads;
 115                 geo->sectors = p->V1.GeometryTranslationSectors;
 116                 geo->cylinders = p->V1.LogicalDriveInformation[drive_nr].
 117                         LogicalDriveSize / (geo->heads * geo->sectors);
 118         } else {
 119                 DAC960_V2_LogicalDeviceInfo_T *i =
 120                         p->V2.LogicalDeviceInformation[drive_nr];
 121                 switch (i->DriveGeometry) {
 122                 case DAC960_V2_Geometry_128_32:
 123                         geo->heads = 128;
 124                         geo->sectors = 32;
 125                         break;
 126                 case DAC960_V2_Geometry_255_63:
 127                         geo->heads = 255;
 128                         geo->sectors = 63;
 129                         break;
 130                 default:
 131                         DAC960_Error("Illegal Logical Device Geometry %d\n",
 132                                         p, i->DriveGeometry);
 133                         return -EINVAL;
 134                 }
 135
 136                 geo->cylinders = i->ConfigurableDeviceSize /
 137                         (geo->heads * geo->sectors);
 138         }
 139
 140         return 0;
 141 }
 142
 143 static int DAC960_media_changed(struct gendisk *disk)
 144 {
 145         DAC960_Controller_T *p = disk->queue->queuedata;
 146         int drive_nr = (long)disk->private_data;
 147
 148         if (!p->LogicalDriveInitiallyAccessible[drive_nr])
 149                 return 1;
 150         return 0;
 151 }
 152
 153 static int DAC960_revalidate_disk(struct gendisk *disk)
 154 {
 155         DAC960_Controller_T *p = disk->queue->queuedata;
 156         int unit = (long)disk->private_data;
 157
 158         set_capacity(disk, disk_size(p, unit));
 159         return 0;
 160 }
 161
 162 static const struct block_device_operations DAC960_BlockDeviceOperations = {
 163         .owner                  = THIS_MODULE,
 164         .open                   = DAC960_open,
 165         .getgeo                 = DAC960_getgeo,
 166         .media_changed          = DAC960_media_changed,
 167         .revalidate_disk        = DAC960_revalidate_disk,
 168 };
 169
 170
 171 /*
 172   DAC960_AnnounceDriver announces the Driver Version and Date, Author's Name,
 173   Copyright Notice, and Electronic Mail Address.
 174 */
 175
 176 static void DAC960_AnnounceDriver(DAC960_Controller_T *Controller)
 177 {
 178   DAC960_Announce("***** DAC960 RAID Driver Version "
 179                   DAC960_DriverVersion " of "
 180                   DAC960_DriverDate " *****\n", Controller);
 181   DAC960_Announce("Copyright 1998-2001 by Leonard N. Zubkoff "
 182                   "<lnz@dandelion.com>\n", Controller);
 183 }
 184
 185
 186 /*
 187   DAC960_Failure prints a standardized error message, and then returns false.
 188 */
 189
 190 static bool DAC960_Failure(DAC960_Controller_T *Controller,
 191                               unsigned char *ErrorMessage)
 192 {
 193   DAC960_Error("While configuring DAC960 PCI RAID Controller at\n",
 194                Controller);
 195   if (Controller->IO_Address == 0)
 196     DAC960_Error("PCI Bus %d Device %d Function %d I/O Address N/A "
 197                  "PCI Address 0x%X\n", Controller,
 198                  Controller->Bus, Controller->Device,
 199                  Controller->Function, Controller->PCI_Address);
 200   else DAC960_Error("PCI Bus %d Device %d Function %d I/O Address "
 201                     "0x%X PCI Address 0x%X\n", Controller,
 202                     Controller->Bus, Controller->Device,
 203                     Controller->Function, Controller->IO_Address,
 204                     Controller->PCI_Address);
 205   DAC960_Error("%s FAILED - DETACHING\n", Controller, ErrorMessage);
 206   return false;
 207 }
 208
 209 /*
 210   init_dma_loaf() and slice_dma_loaf() are helper functions for
 211   aggregating the dma-mapped memory for a well-known collection of
 212   data structures that are of different lengths.
 213
 214   These routines don't guarantee any alignment.  The caller must
 215   include any space needed for alignment in the sizes of the structures
 216   that are passed in.
 217  */
 218
 219 static bool init_dma_loaf(struct pci_dev *dev, struct dma_loaf *loaf,
 220                                                                  size_t len)
 221 {
 222         void *cpu_addr;
 223         dma_addr_t dma_handle;
 224
 225         cpu_addr = pci_alloc_consistent(dev, len, &dma_handle);
 226         if (cpu_addr == NULL)
 227                 return false;
 228
 229         loaf->cpu_free = loaf->cpu_base = cpu_addr;
 230         loaf->dma_free =loaf->dma_base = dma_handle;
 231         loaf->length = len;
 232         memset(cpu_addr, 0, len);
 233         return true;
 234 }
 235
 236 static void *slice_dma_loaf(struct dma_loaf *loaf, size_t len,
 237                                         dma_addr_t *dma_handle)
 238 {
 239         void *cpu_end = loaf->cpu_free + len;
 240         void *cpu_addr = loaf->cpu_free;
 241
 242         BUG_ON(cpu_end > loaf->cpu_base + loaf->length);
 243         *dma_handle = loaf->dma_free;
 244         loaf->cpu_free = cpu_end;
 245         loaf->dma_free += len;
 246         return cpu_addr;
 247 }
 248
 249 static void free_dma_loaf(struct pci_dev *dev, struct dma_loaf *loaf_handle)
 250 {
 251         if (loaf_handle->cpu_base != NULL)
 252                 pci_free_consistent(dev, loaf_handle->length,
 253                         loaf_handle->cpu_base, loaf_handle->dma_base);
 254 }
 255
 256
 257 /*
 258   DAC960_CreateAuxiliaryStructures allocates and initializes the auxiliary
 259   data structures for Controller.  It returns true on success and false on
 260   failure.
 261 */
 262
 263 static bool DAC960_CreateAuxiliaryStructures(DAC960_Controller_T *Controller)
 264 {
 265   int CommandAllocationLength, CommandAllocationGroupSize;
 266   int CommandsRemaining = 0, CommandIdentifier, CommandGroupByteCount;
 267   void *AllocationPointer = NULL;
 268   void *ScatterGatherCPU = NULL;
 269   dma_addr_t ScatterGatherDMA;
 270   struct pci_pool *ScatterGatherPool;
 271   void *RequestSenseCPU = NULL;
 272   dma_addr_t RequestSenseDMA;
 273   struct pci_pool *RequestSensePool = NULL;
 274
 275   if (Controller->FirmwareType == DAC960_V1_Controller)
 276     {
 277       CommandAllocationLength = offsetof(DAC960_Command_T, V1.EndMarker);
 278       CommandAllocationGroupSize = DAC960_V1_CommandAllocationGroupSize;
 279       ScatterGatherPool = pci_pool_create("DAC960_V1_ScatterGather",
 280                 Controller->PCIDevice,
 281         DAC960_V1_ScatterGatherLimit * sizeof(DAC960_V1_ScatterGatherSegment_T),
 282         sizeof(DAC960_V1_ScatterGatherSegment_T), 0);
 283       if (ScatterGatherPool == NULL)
 284             return DAC960_Failure(Controller,
 285                         "AUXILIARY STRUCTURE CREATION (SG)");
 286       Controller->ScatterGatherPool = ScatterGatherPool;
 287     }
 288   else
 289     {
 290       CommandAllocationLength = offsetof(DAC960_Command_T, V2.EndMarker);
 291       CommandAllocationGroupSize = DAC960_V2_CommandAllocationGroupSize;
 292       ScatterGatherPool = pci_pool_create("DAC960_V2_ScatterGather",
 293                 Controller->PCIDevice,
 294         DAC960_V2_ScatterGatherLimit * sizeof(DAC960_V2_ScatterGatherSegment_T),
 295         sizeof(DAC960_V2_ScatterGatherSegment_T), 0);
 296       if (ScatterGatherPool == NULL)
 297             return DAC960_Failure(Controller,
 298                         "AUXILIARY STRUCTURE CREATION (SG)");
 299       RequestSensePool = pci_pool_create("DAC960_V2_RequestSense",
 300                 Controller->PCIDevice, sizeof(DAC960_SCSI_RequestSense_T),
 301                 sizeof(int), 0);
 302       if (RequestSensePool == NULL) {
 303             pci_pool_destroy(ScatterGatherPool);
 304             return DAC960_Failure(Controller,
 305                         "AUXILIARY STRUCTURE CREATION (SG)");
 306       }
 307       Controller->ScatterGatherPool = ScatterGatherPool;
 308       Controller->V2.RequestSensePool = RequestSensePool;
 309     }
 310   Controller->CommandAllocationGroupSize = CommandAllocationGroupSize;
 311   Controller->FreeCommands = NULL;
 312   for (CommandIdentifier = 1;
 313        CommandIdentifier <= Controller->DriverQueueDepth;
 314        CommandIdentifier++)
 315     {
 316       DAC960_Command_T *Command;
 317       if (--CommandsRemaining <= 0)
 318         {
 319           CommandsRemaining =
 320                 Controller->DriverQueueDepth - CommandIdentifier + 1;
 321           if (CommandsRemaining > CommandAllocationGroupSize)
 322                 CommandsRemaining = CommandAllocationGroupSize;
 323           CommandGroupByteCount =
 324                 CommandsRemaining * CommandAllocationLength;
 325           AllocationPointer = kzalloc(CommandGroupByteCount, GFP_ATOMIC);
 326           if (AllocationPointer == NULL)
 327                 return DAC960_Failure(Controller,
 328                                         "AUXILIARY STRUCTURE CREATION");
 329          }
 330       Command = (DAC960_Command_T *) AllocationPointer;
 331       AllocationPointer += CommandAllocationLength;
 332       Command->CommandIdentifier = CommandIdentifier;
 333       Command->Controller = Controller;
 334       Command->Next = Controller->FreeCommands;
 335       Controller->FreeCommands = Command;
 336       Controller->Commands[CommandIdentifier-1] = Command;
 337       ScatterGatherCPU = pci_pool_alloc(ScatterGatherPool, GFP_ATOMIC,
 338                                                         &ScatterGatherDMA);
 339       if (ScatterGatherCPU == NULL)
 340           return DAC960_Failure(Controller, "AUXILIARY STRUCTURE CREATION");
 341
 342       if (RequestSensePool != NULL) {
 343           RequestSenseCPU = pci_pool_alloc(RequestSensePool, GFP_ATOMIC,
 344                                                 &RequestSenseDMA);
 345           if (RequestSenseCPU == NULL) {
 346                 pci_pool_free(ScatterGatherPool, ScatterGatherCPU,
 347                                 ScatterGatherDMA);
 348                 return DAC960_Failure(Controller,
 349                                         "AUXILIARY STRUCTURE CREATION");
 350           }
 351         }
 352      if (Controller->FirmwareType == DAC960_V1_Controller) {
 353         Command->cmd_sglist = Command->V1.ScatterList;
 354         Command->V1.ScatterGatherList =
 355                 (DAC960_V1_ScatterGatherSegment_T *)ScatterGatherCPU;
 356         Command->V1.ScatterGatherListDMA = ScatterGatherDMA;
 357         sg_init_table(Command->cmd_sglist, DAC960_V1_ScatterGatherLimit);
 358       } else {
 359         Command->cmd_sglist = Command->V2.ScatterList;
 360         Command->V2.ScatterGatherList =
 361                 (DAC960_V2_ScatterGatherSegment_T *)ScatterGatherCPU;
 362         Command->V2.ScatterGatherListDMA = ScatterGatherDMA;
 363         Command->V2.RequestSense =
 364                                 (DAC960_SCSI_RequestSense_T *)RequestSenseCPU;
 365         Command->V2.RequestSenseDMA = RequestSenseDMA;
 366         sg_init_table(Command->cmd_sglist, DAC960_V2_ScatterGatherLimit);
 367       }
 368     }
 369   return true;
 370 }
 371
 372
 373 /*
 374   DAC960_DestroyAuxiliaryStructures deallocates the auxiliary data
 375   structures for Controller.
 376 */
 377
 378 static void DAC960_DestroyAuxiliaryStructures(DAC960_Controller_T *Controller)
 379 {
 380   int i;
 381   struct pci_pool *ScatterGatherPool = Controller->ScatterGatherPool;
 382   struct pci_pool *RequestSensePool = NULL;
 383   void *ScatterGatherCPU;
 384   dma_addr_t ScatterGatherDMA;
 385   void *RequestSenseCPU;
 386   dma_addr_t RequestSenseDMA;
 387   DAC960_Command_T *CommandGroup = NULL;
 388
 389
 390   if (Controller->FirmwareType == DAC960_V2_Controller)
 391         RequestSensePool = Controller->V2.RequestSensePool;
 392
 393   Controller->FreeCommands = NULL;
 394   for (i = 0; i < Controller->DriverQueueDepth; i++)
 395     {
 396       DAC960_Command_T *Command = Controller->Commands[i];
 397
 398       if (Command == NULL)
 399           continue;
 400
 401       if (Controller->FirmwareType == DAC960_V1_Controller) {
 402           ScatterGatherCPU = (void *)Command->V1.ScatterGatherList;
 403           ScatterGatherDMA = Command->V1.ScatterGatherListDMA;
 404           RequestSenseCPU = NULL;
 405           RequestSenseDMA = (dma_addr_t)0;
 406       } else {
 407           ScatterGatherCPU = (void *)Command->V2.ScatterGatherList;
 408           ScatterGatherDMA = Command->V2.ScatterGatherListDMA;
 409           RequestSenseCPU = (void *)Command->V2.RequestSense;
 410           RequestSenseDMA = Command->V2.RequestSenseDMA;
 411       }
 412       if (ScatterGatherCPU != NULL)
 413           pci_pool_free(ScatterGatherPool, ScatterGatherCPU, ScatterGatherDMA);
 414       if (RequestSenseCPU != NULL)
 415           pci_pool_free(RequestSensePool, RequestSenseCPU, RequestSenseDMA);
 416
 417       if ((Command->CommandIdentifier
 418            % Controller->CommandAllocationGroupSize) == 1) {
 419            /*
 420             * We can't free the group of commands until all of the
 421             * request sense and scatter gather dma structures are free.
 422             * Remember the beginning of the group, but don't free it
 423             * until we've reached the beginning of the next group.
 424             */
 425            kfree(CommandGroup);
 426            CommandGroup = Command;
 427       }
 428       Controller->Commands[i] = NULL;
 429     }
 430   kfree(CommandGroup);
 431
 432   if (Controller->CombinedStatusBuffer != NULL)
 433     {
 434       kfree(Controller->CombinedStatusBuffer);
 435       Controller->CombinedStatusBuffer = NULL;
 436       Controller->CurrentStatusBuffer = NULL;
 437     }
 438
 439   if (ScatterGatherPool != NULL)
 440         pci_pool_destroy(ScatterGatherPool);
 441   if (Controller->FirmwareType == DAC960_V1_Controller)
 442         return;
 443
 444   if (RequestSensePool != NULL)
 445         pci_pool_destroy(RequestSensePool);
 446
 447   for (i = 0; i < DAC960_MaxLogicalDrives; i++) {
 448         kfree(Controller->V2.LogicalDeviceInformation[i]);
 449         Controller->V2.LogicalDeviceInformation[i] = NULL;
 450   }
 451
 452   for (i = 0; i < DAC960_V2_MaxPhysicalDevices; i++)
 453     {
 454       kfree(Controller->V2.PhysicalDeviceInformation[i]);
 455       Controller->V2.PhysicalDeviceInformation[i] = NULL;
 456       kfree(Controller->V2.InquiryUnitSerialNumber[i]);
 457       Controller->V2.InquiryUnitSerialNumber[i] = NULL;
 458     }
 459 }
 460
 461
 462 /*
 463   DAC960_V1_ClearCommand clears critical fields of Command for DAC960 V1
 464   Firmware Controllers.
 465 */
 466
 467 static inline void DAC960_V1_ClearCommand(DAC960_Command_T *Command)
 468 {
 469   DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
 470   memset(CommandMailbox, 0, sizeof(DAC960_V1_CommandMailbox_T));
 471   Command->V1.CommandStatus = 0;
 472 }
 473
 474
 475 /*
 476   DAC960_V2_ClearCommand clears critical fields of Command for DAC960 V2
 477   Firmware Controllers.
 478 */
 479
 480 static inline void DAC960_V2_ClearCommand(DAC960_Command_T *Command)
 481 {
 482   DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox;
 483   memset(CommandMailbox, 0, sizeof(DAC960_V2_CommandMailbox_T));
 484   Command->V2.CommandStatus = 0;
 485 }
 486
 487
 488 /*
 489   DAC960_AllocateCommand allocates a Command structure from Controller's
 490   free list.  During driver initialization, a special initialization command
 491   has been placed on the free list to guarantee that command allocation can
 492   never fail.
 493 */
 494
 495 static inline DAC960_Command_T *DAC960_AllocateCommand(DAC960_Controller_T
 496                                                        *Controller)
 497 {
 498   DAC960_Command_T *Command = Controller->FreeCommands;
 499   if (Command == NULL) return NULL;
 500   Controller->FreeCommands = Command->Next;
 501   Command->Next = NULL;
 502   return Command;
 503 }
 504
 505
 506 /*
 507   DAC960_DeallocateCommand deallocates Command, returning it to Controller's
 508   free list.
 509 */
 510
 511 static inline void DAC960_DeallocateCommand(DAC960_Command_T *Command)
 512 {
 513   DAC960_Controller_T *Controller = Command->Controller;
 514
 515   Command->Request = NULL;
 516   Command->Next = Controller->FreeCommands;
 517   Controller->FreeCommands = Command;
 518 }
 519
 520
 521 /*
 522   DAC960_WaitForCommand waits for a wake_up on Controller's Command Wait Queue.
 523 */
 524
 525 static void DAC960_WaitForCommand(DAC960_Controller_T *Controller)
 526 {
 527   spin_unlock_irq(&Controller->queue_lock);
 528   __wait_event(Controller->CommandWaitQueue, Controller->FreeCommands);
 529   spin_lock_irq(&Controller->queue_lock);
 530 }
 531
 532 /*
 533   DAC960_GEM_QueueCommand queues Command for DAC960 GEM Series Controllers.
 534 */
 535
 536 static void DAC960_GEM_QueueCommand(DAC960_Command_T *Command)
 537 {
 538   DAC960_Controller_T *Controller = Command->Controller;
 539   void __iomem *ControllerBaseAddress = Controller->BaseAddress;
 540   DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox;
 541   DAC960_V2_CommandMailbox_T *NextCommandMailbox =
 542       Controller->V2.NextCommandMailbox;
 543
 544   CommandMailbox->Common.CommandIdentifier = Command->CommandIdentifier;
 545   DAC960_GEM_WriteCommandMailbox(NextCommandMailbox, CommandMailbox);
 546
 547   if (Controller->V2.PreviousCommandMailbox1->Words[0] == 0 ||
 548       Controller->V2.PreviousCommandMailbox2->Words[0] == 0)
 549       DAC960_GEM_MemoryMailboxNewCommand(ControllerBaseAddress);
 550
 551   Controller->V2.PreviousCommandMailbox2 =
 552       Controller->V2.PreviousCommandMailbox1;
 553   Controller->V2.PreviousCommandMailbox1 = NextCommandMailbox;
 554
 555   if (++NextCommandMailbox > Controller->V2.LastCommandMailbox)
 556       NextCommandMailbox = Controller->V2.FirstCommandMailbox;
 557
 558   Controller->V2.NextCommandMailbox = NextCommandMailbox;
 559 }
 560
 561 /*
 562   DAC960_BA_QueueCommand queues Command for DAC960 BA Series Controllers.
 563 */
 564
 565 static void DAC960_BA_QueueCommand(DAC960_Command_T *Command)
 566 {
 567   DAC960_Controller_T *Controller = Command->Controller;
 568   void __iomem *ControllerBaseAddress = Controller->BaseAddress;
 569   DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox;
 570   DAC960_V2_CommandMailbox_T *NextCommandMailbox =
 571     Controller->V2.NextCommandMailbox;
 572   CommandMailbox->Common.CommandIdentifier = Command->CommandIdentifier;
 573   DAC960_BA_WriteCommandMailbox(NextCommandMailbox, CommandMailbox);
 574   if (Controller->V2.PreviousCommandMailbox1->Words[0] == 0 ||
 575       Controller->V2.PreviousCommandMailbox2->Words[0] == 0)
 576     DAC960_BA_MemoryMailboxNewCommand(ControllerBaseAddress);
 577   Controller->V2.PreviousCommandMailbox2 =
 578     Controller->V2.PreviousCommandMailbox1;
 579   Controller->V2.PreviousCommandMailbox1 = NextCommandMailbox;
 580   if (++NextCommandMailbox > Controller->V2.LastCommandMailbox)
 581     NextCommandMailbox = Controller->V2.FirstCommandMailbox;
 582   Controller->V2.NextCommandMailbox = NextCommandMailbox;
 583 }
 584
 585
 586 /*
 587   DAC960_LP_QueueCommand queues Command for DAC960 LP Series Controllers.
 588 */
 589
 590 static void DAC960_LP_QueueCommand(DAC960_Command_T *Command)
 591 {
 592   DAC960_Controller_T *Controller = Command->Controller;
 593   void __iomem *ControllerBaseAddress = Controller->BaseAddress;
 594   DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox;
 595   DAC960_V2_CommandMailbox_T *NextCommandMailbox =
 596     Controller->V2.NextCommandMailbox;
 597   CommandMailbox->Common.CommandIdentifier = Command->CommandIdentifier;
 598   DAC960_LP_WriteCommandMailbox(NextCommandMailbox, CommandMailbox);
 599   if (Controller->V2.PreviousCommandMailbox1->Words[0] == 0 ||
 600       Controller->V2.PreviousCommandMailbox2->Words[0] == 0)
 601     DAC960_LP_MemoryMailboxNewCommand(ControllerBaseAddress);
 602   Controller->V2.PreviousCommandMailbox2 =
 603     Controller->V2.PreviousCommandMailbox1;
 604   Controller->V2.PreviousCommandMailbox1 = NextCommandMailbox;
 605   if (++NextCommandMailbox > Controller->V2.LastCommandMailbox)
 606     NextCommandMailbox = Controller->V2.FirstCommandMailbox;
 607   Controller->V2.NextCommandMailbox = NextCommandMailbox;
 608 }
 609
 610
 611 /*
 612   DAC960_LA_QueueCommandDualMode queues Command for DAC960 LA Series
 613   Controllers with Dual Mode Firmware.
 614 */
 615
 616 static void DAC960_LA_QueueCommandDualMode(DAC960_Command_T *Command)
 617 {
 618   DAC960_Controller_T *Controller = Command->Controller;
 619   void __iomem *ControllerBaseAddress = Controller->BaseAddress;
 620   DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
 621   DAC960_V1_CommandMailbox_T *NextCommandMailbox =
 622     Controller->V1.NextCommandMailbox;
 623   CommandMailbox->Common.CommandIdentifier = Command->CommandIdentifier;
 624   DAC960_LA_WriteCommandMailbox(NextCommandMailbox, CommandMailbox);
 625   if (Controller->V1.PreviousCommandMailbox1->Words[0] == 0 ||
 626       Controller->V1.PreviousCommandMailbox2->Words[0] == 0)
 627     DAC960_LA_MemoryMailboxNewCommand(ControllerBaseAddress);
 628   Controller->V1.PreviousCommandMailbox2 =
 629     Controller->V1.PreviousCommandMailbox1;
 630   Controller->V1.PreviousCommandMailbox1 = NextCommandMailbox;
 631   if (++NextCommandMailbox > Controller->V1.LastCommandMailbox)
 632     NextCommandMailbox = Controller->V1.FirstCommandMailbox;
 633   Controller->V1.NextCommandMailbox = NextCommandMailbox;
 634 }
 635
 636
 637 /*
 638   DAC960_LA_QueueCommandSingleMode queues Command for DAC960 LA Series
 639   Controllers with Single Mode Firmware.
 640 */
 641
 642 static void DAC960_LA_QueueCommandSingleMode(DAC960_Command_T *Command)
 643 {
 644   DAC960_Controller_T *Controller = Command->Controller;
 645   void __iomem *ControllerBaseAddress = Controller->BaseAddress;
 646   DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
 647   DAC960_V1_CommandMailbox_T *NextCommandMailbox =
 648     Controller->V1.NextCommandMailbox;
 649   CommandMailbox->Common.CommandIdentifier = Command->CommandIdentifier;
 650   DAC960_LA_WriteCommandMailbox(NextCommandMailbox, CommandMailbox);
 651   if (Controller->V1.PreviousCommandMailbox1->Words[0] == 0 ||
 652       Controller->V1.PreviousCommandMailbox2->Words[0] == 0)
 653     DAC960_LA_HardwareMailboxNewCommand(ControllerBaseAddress);
 654   Controller->V1.PreviousCommandMailbox2 =
 655     Controller->V1.PreviousCommandMailbox1;
 656   Controller->V1.PreviousCommandMailbox1 = NextCommandMailbox;
 657   if (++NextCommandMailbox > Controller->V1.LastCommandMailbox)
 658     NextCommandMailbox = Controller->V1.FirstCommandMailbox;
 659   Controller->V1.NextCommandMailbox = NextCommandMailbox;
 660 }
 661
 662
 663 /*
 664   DAC960_PG_QueueCommandDualMode queues Command for DAC960 PG Series
 665   Controllers with Dual Mode Firmware.
 666 */
 667
 668 static void DAC960_PG_QueueCommandDualMode(DAC960_Command_T *Command)
 669 {
 670   DAC960_Controller_T *Controller = Command->Controller;
 671   void __iomem *ControllerBaseAddress = Controller->BaseAddress;
 672   DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
 673   DAC960_V1_CommandMailbox_T *NextCommandMailbox =
 674     Controller->V1.NextCommandMailbox;
 675   CommandMailbox->Common.CommandIdentifier = Command->CommandIdentifier;
 676   DAC960_PG_WriteCommandMailbox(NextCommandMailbox, CommandMailbox);
 677   if (Controller->V1.PreviousCommandMailbox1->Words[0] == 0 ||
 678       Controller->V1.PreviousCommandMailbox2->Words[0] == 0)
 679     DAC960_PG_MemoryMailboxNewCommand(ControllerBaseAddress);
 680   Controller->V1.PreviousCommandMailbox2 =
 681     Controller->V1.PreviousCommandMailbox1;
 682   Controller->V1.PreviousCommandMailbox1 = NextCommandMailbox;
 683   if (++NextCommandMailbox > Controller->V1.LastCommandMailbox)
 684     NextCommandMailbox = Controller->V1.FirstCommandMailbox;
 685   Controller->V1.NextCommandMailbox = NextCommandMailbox;
 686 }
 687
 688
 689 /*
 690   DAC960_PG_QueueCommandSingleMode queues Command for DAC960 PG Series
 691   Controllers with Single Mode Firmware.
 692 */
 693
 694 static void DAC960_PG_QueueCommandSingleMode(DAC960_Command_T *Command)
 695 {
 696   DAC960_Controller_T *Controller = Command->Controller;
 697   void __iomem *ControllerBaseAddress = Controller->BaseAddress;
 698   DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
 699   DAC960_V1_CommandMailbox_T *NextCommandMailbox =
 700     Controller->V1.NextCommandMailbox;
 701   CommandMailbox->Common.CommandIdentifier = Command->CommandIdentifier;
 702   DAC960_PG_WriteCommandMailbox(NextCommandMailbox, CommandMailbox);
 703   if (Controller->V1.PreviousCommandMailbox1->Words[0] == 0 ||
 704       Controller->V1.PreviousCommandMailbox2->Words[0] == 0)
 705     DAC960_PG_HardwareMailboxNewCommand(ControllerBaseAddress);
 706   Controller->V1.PreviousCommandMailbox2 =
 707     Controller->V1.PreviousCommandMailbox1;
 708   Controller->V1.PreviousCommandMailbox1 = NextCommandMailbox;
 709   if (++NextCommandMailbox > Controller->V1.LastCommandMailbox)
 710     NextCommandMailbox = Controller->V1.FirstCommandMailbox;
 711   Controller->V1.NextCommandMailbox = NextCommandMailbox;
 712 }
 713
 714
 715 /*
 716   DAC960_PD_QueueCommand queues Command for DAC960 PD Series Controllers.
 717 */
 718
 719 static void DAC960_PD_QueueCommand(DAC960_Command_T *Command)
 720 {
 721   DAC960_Controller_T *Controller = Command->Controller;
 722   void __iomem *ControllerBaseAddress = Controller->BaseAddress;
 723   DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
 724   CommandMailbox->Common.CommandIdentifier = Command->CommandIdentifier;
 725   while (DAC960_PD_MailboxFullP(ControllerBaseAddress))
 726     udelay(1);
 727   DAC960_PD_WriteCommandMailbox(ControllerBaseAddress, CommandMailbox);
 728   DAC960_PD_NewCommand(ControllerBaseAddress);
 729 }
 730
 731
 732 /*
 733   DAC960_P_QueueCommand queues Command for DAC960 P Series Controllers.
 734 */
 735
 736 static void DAC960_P_QueueCommand(DAC960_Command_T *Command)
 737 {
 738   DAC960_Controller_T *Controller = Command->Controller;
 739   void __iomem *ControllerBaseAddress = Controller->BaseAddress;
 740   DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
 741   CommandMailbox->Common.CommandIdentifier = Command->CommandIdentifier;
 742   switch (CommandMailbox->Common.CommandOpcode)
 743     {
 744     case DAC960_V1_Enquiry:
 745       CommandMailbox->Common.CommandOpcode = DAC960_V1_Enquiry_Old;
 746       break;
 747     case DAC960_V1_GetDeviceState:
 748       CommandMailbox->Common.CommandOpcode = DAC960_V1_GetDeviceState_Old;
 749       break;
 750     case DAC960_V1_Read:
 751       CommandMailbox->Common.CommandOpcode = DAC960_V1_Read_Old;
 752       DAC960_PD_To_P_TranslateReadWriteCommand(CommandMailbox);
 753       break;
 754     case DAC960_V1_Write:
 755       CommandMailbox->Common.CommandOpcode = DAC960_V1_Write_Old;
 756       DAC960_PD_To_P_TranslateReadWriteCommand(CommandMailbox);
 757       break;
 758     case DAC960_V1_ReadWithScatterGather:
 759       CommandMailbox->Common.CommandOpcode =
 760         DAC960_V1_ReadWithScatterGather_Old;
 761       DAC960_PD_To_P_TranslateReadWriteCommand(CommandMailbox);
 762       break;
 763     case DAC960_V1_WriteWithScatterGather:
 764       CommandMailbox->Common.CommandOpcode =
 765         DAC960_V1_WriteWithScatterGather_Old;
 766       DAC960_PD_To_P_TranslateReadWriteCommand(CommandMailbox);
 767       break;
 768     default:
 769       break;
 770     }
 771   while (DAC960_PD_MailboxFullP(ControllerBaseAddress))
 772     udelay(1);
 773   DAC960_PD_WriteCommandMailbox(ControllerBaseAddress, CommandMailbox);
 774   DAC960_PD_NewCommand(ControllerBaseAddress);
 775 }
 776
 777
 778 /*
 779   DAC960_ExecuteCommand executes Command and waits for completion.
 780 */
 781
 782 static void DAC960_ExecuteCommand(DAC960_Command_T *Command)
 783 {
 784   DAC960_Controller_T *Controller = Command->Controller;
 785   DECLARE_COMPLETION_ONSTACK(Completion);
 786   unsigned long flags;
 787   Command->Completion = &Completion;
 788
 789   spin_lock_irqsave(&Controller->queue_lock, flags);
 790   DAC960_QueueCommand(Command);
 791   spin_unlock_irqrestore(&Controller->queue_lock, flags);
 792
 793   if (in_interrupt())
 794           return;
 795   wait_for_completion(&Completion);
 796 }
 797
 798
 799 /*
 800   DAC960_V1_ExecuteType3 executes a DAC960 V1 Firmware Controller Type 3
 801   Command and waits for completion.  It returns true on success and false
 802   on failure.
 803 */
 804
 805 static bool DAC960_V1_ExecuteType3(DAC960_Controller_T *Controller,
 806                                       DAC960_V1_CommandOpcode_T CommandOpcode,
 807                                       dma_addr_t DataDMA)
 808 {
 809   DAC960_Command_T *Command = DAC960_AllocateCommand(Controller);
 810   DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
 811   DAC960_V1_CommandStatus_T CommandStatus;
 812   DAC960_V1_ClearCommand(Command);
 813   Command->CommandType = DAC960_ImmediateCommand;
 814   CommandMailbox->Type3.CommandOpcode = CommandOpcode;
 815   CommandMailbox->Type3.BusAddress = DataDMA;
 816   DAC960_ExecuteCommand(Command);
 817   CommandStatus = Command->V1.CommandStatus;
 818   DAC960_DeallocateCommand(Command);
 819   return (CommandStatus == DAC960_V1_NormalCompletion);
 820 }
 821
 822
 823 /*
 824   DAC960_V1_ExecuteTypeB executes a DAC960 V1 Firmware Controller Type 3B
 825   Command and waits for completion.  It returns true on success and false
 826   on failure.
 827 */
 828
 829 static bool DAC960_V1_ExecuteType3B(DAC960_Controller_T *Controller,
 830                                        DAC960_V1_CommandOpcode_T CommandOpcode,
 831                                        unsigned char CommandOpcode2,
 832                                        dma_addr_t DataDMA)
 833 {
 834   DAC960_Command_T *Command = DAC960_AllocateCommand(Controller);
 835   DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
 836   DAC960_V1_CommandStatus_T CommandStatus;
 837   DAC960_V1_ClearCommand(Command);
 838   Command->CommandType = DAC960_ImmediateCommand;
 839   CommandMailbox->Type3B.CommandOpcode = CommandOpcode;
 840   CommandMailbox->Type3B.CommandOpcode2 = CommandOpcode2;
 841   CommandMailbox->Type3B.BusAddress = DataDMA;
 842   DAC960_ExecuteCommand(Command);
 843   CommandStatus = Command->V1.CommandStatus;
 844   DAC960_DeallocateCommand(Command);
 845   return (CommandStatus == DAC960_V1_NormalCompletion);
 846 }
 847
 848
 849 /*
 850   DAC960_V1_ExecuteType3D executes a DAC960 V1 Firmware Controller Type 3D
 851   Command and waits for completion.  It returns true on success and false
 852   on failure.
 853 */
 854
 855 static bool DAC960_V1_ExecuteType3D(DAC960_Controller_T *Controller,
 856                                        DAC960_V1_CommandOpcode_T CommandOpcode,
 857                                        unsigned char Channel,
 858                                        unsigned char TargetID,
 859                                        dma_addr_t DataDMA)
 860 {
 861   DAC960_Command_T *Command = DAC960_AllocateCommand(Controller);
 862   DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
 863   DAC960_V1_CommandStatus_T CommandStatus;
 864   DAC960_V1_ClearCommand(Command);
 865   Command->CommandType = DAC960_ImmediateCommand;
 866   CommandMailbox->Type3D.CommandOpcode = CommandOpcode;
 867   CommandMailbox->Type3D.Channel = Channel;
 868   CommandMailbox->Type3D.TargetID = TargetID;
 869   CommandMailbox->Type3D.BusAddress = DataDMA;
 870   DAC960_ExecuteCommand(Command);
 871   CommandStatus = Command->V1.CommandStatus;
 872   DAC960_DeallocateCommand(Command);
 873   return (CommandStatus == DAC960_V1_NormalCompletion);
 874 }
 875
 876
 877 /*
 878   DAC960_V2_GeneralInfo executes a DAC960 V2 Firmware General Information
 879   Reading IOCTL Command and waits for completion.  It returns true on success
 880   and false on failure.
 881
 882   Return data in The controller's HealthStatusBuffer, which is dma-able memory
 883 */
 884
 885 static bool DAC960_V2_GeneralInfo(DAC960_Controller_T *Controller)
 886 {
 887   DAC960_Command_T *Command = DAC960_AllocateCommand(Controller);
 888   DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox;
 889   DAC960_V2_CommandStatus_T CommandStatus;
 890   DAC960_V2_ClearCommand(Command);
 891   Command->CommandType = DAC960_ImmediateCommand;
 892   CommandMailbox->Common.CommandOpcode = DAC960_V2_IOCTL;
 893   CommandMailbox->Common.CommandControlBits
 894                         .DataTransferControllerToHost = true;
 895   CommandMailbox->Common.CommandControlBits
 896                         .NoAutoRequestSense = true;
 897   CommandMailbox->Common.DataTransferSize = sizeof(DAC960_V2_HealthStatusBuffer_T);
 898   CommandMailbox->Common.IOCTL_Opcode = DAC960_V2_GetHealthStatus;
 899   CommandMailbox->Common.DataTransferMemoryAddress
 900                         .ScatterGatherSegments[0]
 901                         .SegmentDataPointer =
 902     Controller->V2.HealthStatusBufferDMA;
 903   CommandMailbox->Common.DataTransferMemoryAddress
 904                         .ScatterGatherSegments[0]
 905                         .SegmentByteCount =
 906     CommandMailbox->Common.DataTransferSize;
 907   DAC960_ExecuteCommand(Command);
 908   CommandStatus = Command->V2.CommandStatus;
 909   DAC960_DeallocateCommand(Command);
 910   return (CommandStatus == DAC960_V2_NormalCompletion);
 911 }
 912
 913
 914 /*
 915   DAC960_V2_ControllerInfo executes a DAC960 V2 Firmware Controller
 916   Information Reading IOCTL Command and waits for completion.  It returns
 917   true on success and false on failure.
 918
 919   Data is returned in the controller's V2.NewControllerInformation dma-able
 920   memory buffer.
 921 */
 922
 923 static bool DAC960_V2_NewControllerInfo(DAC960_Controller_T *Controller)
 924 {
 925   DAC960_Command_T *Command = DAC960_AllocateCommand(Controller);
 926   DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox;
 927   DAC960_V2_CommandStatus_T CommandStatus;
 928   DAC960_V2_ClearCommand(Command);
 929   Command->CommandType = DAC960_ImmediateCommand;
 930   CommandMailbox->ControllerInfo.CommandOpcode = DAC960_V2_IOCTL;
 931   CommandMailbox->ControllerInfo.CommandControlBits
 932                                 .DataTransferControllerToHost = true;
 933   CommandMailbox->ControllerInfo.CommandControlBits
 934                                 .NoAutoRequestSense = true;
 935   CommandMailbox->ControllerInfo.DataTransferSize = sizeof(DAC960_V2_ControllerInfo_T);
 936   CommandMailbox->ControllerInfo.ControllerNumber = 0;
 937   CommandMailbox->ControllerInfo.IOCTL_Opcode = DAC960_V2_GetControllerInfo;
 938   CommandMailbox->ControllerInfo.DataTransferMemoryAddress
 939                                 .ScatterGatherSegments[0]
 940                                 .SegmentDataPointer =
 941         Controller->V2.NewControllerInformationDMA;
 942   CommandMailbox->ControllerInfo.DataTransferMemoryAddress
 943                                 .ScatterGatherSegments[0]
 944                                 .SegmentByteCount =
 945     CommandMailbox->ControllerInfo.DataTransferSize;
 946   DAC960_ExecuteCommand(Command);
 947   CommandStatus = Command->V2.CommandStatus;
 948   DAC960_DeallocateCommand(Command);
 949   return (CommandStatus == DAC960_V2_NormalCompletion);
 950 }
 951
 952
 953 /*
 954   DAC960_V2_LogicalDeviceInfo executes a DAC960 V2 Firmware Controller Logical
 955   Device Information Reading IOCTL Command and waits for completion.  It
 956   returns true on success and false on failure.
 957
 958   Data is returned in the controller's V2.NewLogicalDeviceInformation
 959 */
 960
 961 static bool DAC960_V2_NewLogicalDeviceInfo(DAC960_Controller_T *Controller,
 962                                            unsigned short LogicalDeviceNumber)
 963 {
 964   DAC960_Command_T *Command = DAC960_AllocateCommand(Controller);
 965   DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox;
 966   DAC960_V2_CommandStatus_T CommandStatus;
 967
 968   DAC960_V2_ClearCommand(Command);
 969   Command->CommandType = DAC960_ImmediateCommand;
 970   CommandMailbox->LogicalDeviceInfo.CommandOpcode =
 971                                 DAC960_V2_IOCTL;
 972   CommandMailbox->LogicalDeviceInfo.CommandControlBits
 973                                    .DataTransferControllerToHost = true;
 974   CommandMailbox->LogicalDeviceInfo.CommandControlBits
 975                                    .NoAutoRequestSense = true;
 976   CommandMailbox->LogicalDeviceInfo.DataTransferSize =
 977                                 sizeof(DAC960_V2_LogicalDeviceInfo_T);
 978   CommandMailbox->LogicalDeviceInfo.LogicalDevice.LogicalDeviceNumber =
 979     LogicalDeviceNumber;
 980   CommandMailbox->LogicalDeviceInfo.IOCTL_Opcode = DAC960_V2_GetLogicalDeviceInfoValid;
 981   CommandMailbox->LogicalDeviceInfo.DataTransferMemoryAddress
 982                                    .ScatterGatherSegments[0]
 983                                    .SegmentDataPointer =
 984         Controller->V2.NewLogicalDeviceInformationDMA;
 985   CommandMailbox->LogicalDeviceInfo.DataTransferMemoryAddress
 986                                    .ScatterGatherSegments[0]
 987                                    .SegmentByteCount =
 988     CommandMailbox->LogicalDeviceInfo.DataTransferSize;
 989   DAC960_ExecuteCommand(Command);
 990   CommandStatus = Command->V2.CommandStatus;
 991   DAC960_DeallocateCommand(Command);
 992   return (CommandStatus == DAC960_V2_NormalCompletion);
 993 }
 994
 995
 996 /*
 997   DAC960_V2_PhysicalDeviceInfo executes a DAC960 V2 Firmware Controller "Read
 998   Physical Device Information" IOCTL Command and waits for completion.  It
 999   returns true on success and false on failure.
1000
1001   The Channel, TargetID, LogicalUnit arguments should be 0 the first time
1002   this function is called for a given controller.  This will return data
1003   for the "first" device on that controller.  The returned data includes a
1004   Channel, TargetID, LogicalUnit that can be passed in to this routine to
1005   get data for the NEXT device on that controller.
1006
1007   Data is stored in the controller's V2.NewPhysicalDeviceInfo dma-able
1008   memory buffer.
1009
1010 */
1011
1012 static bool DAC960_V2_NewPhysicalDeviceInfo(DAC960_Controller_T *Controller,
1013                                             unsigned char Channel,
1014                                             unsigned char TargetID,
1015                                             unsigned char LogicalUnit)
1016 {
1017   DAC960_Command_T *Command = DAC960_AllocateCommand(Controller);
1018   DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox;
1019   DAC960_V2_CommandStatus_T CommandStatus;
1020
1021   DAC960_V2_ClearCommand(Command);
1022   Command->CommandType = DAC960_ImmediateCommand;
1023   CommandMailbox->PhysicalDeviceInfo.CommandOpcode = DAC960_V2_IOCTL;
1024   CommandMailbox->PhysicalDeviceInfo.CommandControlBits
1025                                     .DataTransferControllerToHost = true;
1026   CommandMailbox->PhysicalDeviceInfo.CommandControlBits
1027                                     .NoAutoRequestSense = true;
1028   CommandMailbox->PhysicalDeviceInfo.DataTransferSize =
1029                                 sizeof(DAC960_V2_PhysicalDeviceInfo_T);
1030   CommandMailbox->PhysicalDeviceInfo.PhysicalDevice.LogicalUnit = LogicalUnit;
1031   CommandMailbox->PhysicalDeviceInfo.PhysicalDevice.TargetID = TargetID;
1032   CommandMailbox->PhysicalDeviceInfo.PhysicalDevice.Channel = Channel;
1033   CommandMailbox->PhysicalDeviceInfo.IOCTL_Opcode =
1034                                         DAC960_V2_GetPhysicalDeviceInfoValid;
1035   CommandMailbox->PhysicalDeviceInfo.DataTransferMemoryAddress
1036                                     .ScatterGatherSegments[0]
1037                                     .SegmentDataPointer =
1038                                         Controller->V2.NewPhysicalDeviceInformationDMA;
1039   CommandMailbox->PhysicalDeviceInfo.DataTransferMemoryAddress
1040                                     .ScatterGatherSegments[0]
1041                                     .SegmentByteCount =
1042     CommandMailbox->PhysicalDeviceInfo.DataTransferSize;
1043   DAC960_ExecuteCommand(Command);
1044   CommandStatus = Command->V2.CommandStatus;
1045   DAC960_DeallocateCommand(Command);
1046   return (CommandStatus == DAC960_V2_NormalCompletion);
1047 }
1048
1049
1050 static void DAC960_V2_ConstructNewUnitSerialNumber(
1051         DAC960_Controller_T *Controller,
1052         DAC960_V2_CommandMailbox_T *CommandMailbox, int Channel, int TargetID,
1053         int LogicalUnit)
1054 {
1055       CommandMailbox->SCSI_10.CommandOpcode = DAC960_V2_SCSI_10_Passthru;
1056       CommandMailbox->SCSI_10.CommandControlBits
1057                              .DataTransferControllerToHost = true;
1058       CommandMailbox->SCSI_10.CommandControlBits
1059                              .NoAutoRequestSense = true;
1060       CommandMailbox->SCSI_10.DataTransferSize =
1061         sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T);
1062       CommandMailbox->SCSI_10.PhysicalDevice.LogicalUnit = LogicalUnit;
1063       CommandMailbox->SCSI_10.PhysicalDevice.TargetID = TargetID;
1064       CommandMailbox->SCSI_10.PhysicalDevice.Channel = Channel;
1065       CommandMailbox->SCSI_10.CDBLength = 6;
1066       CommandMailbox->SCSI_10.SCSI_CDB[0] = 0x12; /* INQUIRY */
1067       CommandMailbox->SCSI_10.SCSI_CDB[1] = 1; /* EVPD = 1 */
1068       CommandMailbox->SCSI_10.SCSI_CDB[2] = 0x80; /* Page Code */
1069       CommandMailbox->SCSI_10.SCSI_CDB[3] = 0; /* Reserved */
1070       CommandMailbox->SCSI_10.SCSI_CDB[4] =
1071         sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T);
1072       CommandMailbox->SCSI_10.SCSI_CDB[5] = 0; /* Control */
1073       CommandMailbox->SCSI_10.DataTransferMemoryAddress
1074                              .ScatterGatherSegments[0]
1075                              .SegmentDataPointer =
1076                 Controller->V2.NewInquiryUnitSerialNumberDMA;
1077       CommandMailbox->SCSI_10.DataTransferMemoryAddress
1078                              .ScatterGatherSegments[0]
1079                              .SegmentByteCount =
1080                 CommandMailbox->SCSI_10.DataTransferSize;
1081 }
1082
1083
1084 /*
1085   DAC960_V2_NewUnitSerialNumber executes an SCSI pass-through
1086   Inquiry command to a SCSI device identified by Channel number,
1087   Target id, Logical Unit Number.  This function Waits for completion
1088   of the command.
1089
1090   The return data includes Unit Serial Number information for the
1091   specified device.
1092
1093   Data is stored in the controller's V2.NewPhysicalDeviceInfo dma-able
1094   memory buffer.
1095 */
1096
1097 static bool DAC960_V2_NewInquiryUnitSerialNumber(DAC960_Controller_T *Controller,
1098                         int Channel, int TargetID, int LogicalUnit)
1099 {
1100       DAC960_Command_T *Command;
1101       DAC960_V2_CommandMailbox_T *CommandMailbox;
1102       DAC960_V2_CommandStatus_T CommandStatus;
1103
1104       Command = DAC960_AllocateCommand(Controller);
1105       CommandMailbox = &Command->V2.CommandMailbox;
1106       DAC960_V2_ClearCommand(Command);
1107       Command->CommandType = DAC960_ImmediateCommand;
1108
1109       DAC960_V2_ConstructNewUnitSerialNumber(Controller, CommandMailbox,
1110                         Channel, TargetID, LogicalUnit);
1111
1112       DAC960_ExecuteCommand(Command);
1113       CommandStatus = Command->V2.CommandStatus;
1114       DAC960_DeallocateCommand(Command);
1115       return (CommandStatus == DAC960_V2_NormalCompletion);
1116 }
1117
1118
1119 /*
1120   DAC960_V2_DeviceOperation executes a DAC960 V2 Firmware Controller Device
1121   Operation IOCTL Command and waits for completion.  It returns true on
1122   success and false on failure.
1123 */
1124
1125 static bool DAC960_V2_DeviceOperation(DAC960_Controller_T *Controller,
1126                                          DAC960_V2_IOCTL_Opcode_T IOCTL_Opcode,
1127                                          DAC960_V2_OperationDevice_T
1128                                            OperationDevice)
1129 {
1130   DAC960_Command_T *Command = DAC960_AllocateCommand(Controller);
1131   DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox;
1132   DAC960_V2_CommandStatus_T CommandStatus;
1133   DAC960_V2_ClearCommand(Command);
1134   Command->CommandType = DAC960_ImmediateCommand;
1135   CommandMailbox->DeviceOperation.CommandOpcode = DAC960_V2_IOCTL;
1136   CommandMailbox->DeviceOperation.CommandControlBits
1137                                  .DataTransferControllerToHost = true;
1138   CommandMailbox->DeviceOperation.CommandControlBits
1139                                  .NoAutoRequestSense = true;
1140   CommandMailbox->DeviceOperation.IOCTL_Opcode = IOCTL_Opcode;
1141   CommandMailbox->DeviceOperation.OperationDevice = OperationDevice;
1142   DAC960_ExecuteCommand(Command);
1143   CommandStatus = Command->V2.CommandStatus;
1144   DAC960_DeallocateCommand(Command);
1145   return (CommandStatus == DAC960_V2_NormalCompletion);
1146 }
1147
1148
1149 /*
1150   DAC960_V1_EnableMemoryMailboxInterface enables the Memory Mailbox Interface
1151   for DAC960 V1 Firmware Controllers.
1152
1153   PD and P controller types have no memory mailbox, but still need the
1154   other dma mapped memory.
1155 */
1156
1157 static bool DAC960_V1_EnableMemoryMailboxInterface(DAC960_Controller_T
1158                                                       *Controller)
1159 {
1160   void __iomem *ControllerBaseAddress = Controller->BaseAddress;
1161   DAC960_HardwareType_T hw_type = Controller->HardwareType;
1162   struct pci_dev *PCI_Device = Controller->PCIDevice;
1163   struct dma_loaf *DmaPages = &Controller->DmaPages;
1164   size_t DmaPagesSize;
1165   size_t CommandMailboxesSize;
1166   size_t StatusMailboxesSize;
1167
1168   DAC960_V1_CommandMailbox_T *CommandMailboxesMemory;
1169   dma_addr_t CommandMailboxesMemoryDMA;
1170
1171   DAC960_V1_StatusMailbox_T *StatusMailboxesMemory;
1172   dma_addr_t StatusMailboxesMemoryDMA;
1173
1174   DAC960_V1_CommandMailbox_T CommandMailbox;
1175   DAC960_V1_CommandStatus_T CommandStatus;
1176   int TimeoutCounter;
1177   int i;
1178
1179
1180   if (pci_set_dma_mask(Controller->PCIDevice, DMA_BIT_MASK(32)))
1181         return DAC960_Failure(Controller, "DMA mask out of range");
1182   Controller->BounceBufferLimit = DMA_BIT_MASK(32);
1183
1184   if ((hw_type == DAC960_PD_Controller) || (hw_type == DAC960_P_Controller)) {
1185     CommandMailboxesSize =  0;
1186     StatusMailboxesSize = 0;
1187   } else {
1188     CommandMailboxesSize =  DAC960_V1_CommandMailboxCount * sizeof(DAC960_V1_CommandMailbox_T);
1189     StatusMailboxesSize = DAC960_V1_StatusMailboxCount * sizeof(DAC960_V1_StatusMailbox_T);
1190   }
1191   DmaPagesSize = CommandMailboxesSize + StatusMailboxesSize +
1192         sizeof(DAC960_V1_DCDB_T) + sizeof(DAC960_V1_Enquiry_T) +
1193         sizeof(DAC960_V1_ErrorTable_T) + sizeof(DAC960_V1_EventLogEntry_T) +
1194         sizeof(DAC960_V1_RebuildProgress_T) +
1195         sizeof(DAC960_V1_LogicalDriveInformationArray_T) +
1196         sizeof(DAC960_V1_BackgroundInitializationStatus_T) +
1197         sizeof(DAC960_V1_DeviceState_T) + sizeof(DAC960_SCSI_Inquiry_T) +
1198         sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T);
1199
1200   if (!init_dma_loaf(PCI_Device, DmaPages, DmaPagesSize))
1201         return false;
1202
1203
1204   if ((hw_type == DAC960_PD_Controller) || (hw_type == DAC960_P_Controller))
1205         goto skip_mailboxes;
1206
1207   CommandMailboxesMemory = slice_dma_loaf(DmaPages,
1208                 CommandMailboxesSize, &CommandMailboxesMemoryDMA);
1209
1210   /* These are the base addresses for the command memory mailbox array */
1211   Controller->V1.FirstCommandMailbox = CommandMailboxesMemory;
1212   Controller->V1.FirstCommandMailboxDMA = CommandMailboxesMemoryDMA;
1213
1214   CommandMailboxesMemory += DAC960_V1_CommandMailboxCount - 1;
1215   Controller->V1.LastCommandMailbox = CommandMailboxesMemory;
1216   Controller->V1.NextCommandMailbox = Controller->V1.FirstCommandMailbox;
1217   Controller->V1.PreviousCommandMailbox1 = Controller->V1.LastCommandMailbox;
1218   Controller->V1.PreviousCommandMailbox2 =
1219                                         Controller->V1.LastCommandMailbox - 1;
1220
1221   /* These are the base addresses for the status memory mailbox array */
1222   StatusMailboxesMemory = slice_dma_loaf(DmaPages,
1223                 StatusMailboxesSize, &StatusMailboxesMemoryDMA);
1224
1225   Controller->V1.FirstStatusMailbox = StatusMailboxesMemory;
1226   Controller->V1.FirstStatusMailboxDMA = StatusMailboxesMemoryDMA;
1227   StatusMailboxesMemory += DAC960_V1_StatusMailboxCount - 1;
1228   Controller->V1.LastStatusMailbox = StatusMailboxesMemory;
1229   Controller->V1.NextStatusMailbox = Controller->V1.FirstStatusMailbox;
1230
1231 skip_mailboxes:
1232   Controller->V1.MonitoringDCDB = slice_dma_loaf(DmaPages,
1233                 sizeof(DAC960_V1_DCDB_T),
1234                 &Controller->V1.MonitoringDCDB_DMA);
1235
1236   Controller->V1.NewEnquiry = slice_dma_loaf(DmaPages,
1237                 sizeof(DAC960_V1_Enquiry_T),
1238                 &Controller->V1.NewEnquiryDMA);
1239
1240   Controller->V1.NewErrorTable = slice_dma_loaf(DmaPages,
1241                 sizeof(DAC960_V1_ErrorTable_T),
1242                 &Controller->V1.NewErrorTableDMA);
1243
1244   Controller->V1.EventLogEntry = slice_dma_loaf(DmaPages,
1245                 sizeof(DAC960_V1_EventLogEntry_T),
1246                 &Controller->V1.EventLogEntryDMA);
1247
1248   Controller->V1.RebuildProgress = slice_dma_loaf(DmaPages,
1249                 sizeof(DAC960_V1_RebuildProgress_T),
1250                 &Controller->V1.RebuildProgressDMA);
1251
1252   Controller->V1.NewLogicalDriveInformation = slice_dma_loaf(DmaPages,
1253                 sizeof(DAC960_V1_LogicalDriveInformationArray_T),
1254                 &Controller->V1.NewLogicalDriveInformationDMA);
1255
1256   Controller->V1.BackgroundInitializationStatus = slice_dma_loaf(DmaPages,
1257                 sizeof(DAC960_V1_BackgroundInitializationStatus_T),
1258                 &Controller->V1.BackgroundInitializationStatusDMA);
1259
1260   Controller->V1.NewDeviceState = slice_dma_loaf(DmaPages,
1261                 sizeof(DAC960_V1_DeviceState_T),
1262                 &Controller->V1.NewDeviceStateDMA);
1263
1264   Controller->V1.NewInquiryStandardData = slice_dma_loaf(DmaPages,
1265                 sizeof(DAC960_SCSI_Inquiry_T),
1266                 &Controller->V1.NewInquiryStandardDataDMA);
1267
1268   Controller->V1.NewInquiryUnitSerialNumber = slice_dma_loaf(DmaPages,
1269                 sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T),
1270                 &Controller->V1.NewInquiryUnitSerialNumberDMA);
1271
1272   if ((hw_type == DAC960_PD_Controller) || (hw_type == DAC960_P_Controller))
1273         return true;
1274
1275   /* Enable the Memory Mailbox Interface. */
1276   Controller->V1.DualModeMemoryMailboxInterface = true;
1277   CommandMailbox.TypeX.CommandOpcode = 0x2B;
1278   CommandMailbox.TypeX.CommandIdentifier = 0;
1279   CommandMailbox.TypeX.CommandOpcode2 = 0x14;
1280   CommandMailbox.TypeX.CommandMailboxesBusAddress =
1281                                 Controller->V1.FirstCommandMailboxDMA;
1282   CommandMailbox.TypeX.StatusMailboxesBusAddress =
1283                                 Controller->V1.FirstStatusMailboxDMA;
1284 #define TIMEOUT_COUNT 1000000
1285
1286   for (i = 0; i < 2; i++)
1287     switch (Controller->HardwareType)
1288       {
1289       case DAC960_LA_Controller:
1290         TimeoutCounter = TIMEOUT_COUNT;
1291         while (--TimeoutCounter >= 0)
1292           {
1293             if (!DAC960_LA_HardwareMailboxFullP(ControllerBaseAddress))
1294               break;
1295             udelay(10);
1296           }
1297         if (TimeoutCounter < 0) return false;
1298         DAC960_LA_WriteHardwareMailbox(ControllerBaseAddress, &CommandMailbox);
1299         DAC960_LA_HardwareMailboxNewCommand(ControllerBaseAddress);
1300         TimeoutCounter = TIMEOUT_COUNT;
1301         while (--TimeoutCounter >= 0)
1302           {
1303             if (DAC960_LA_HardwareMailboxStatusAvailableP(
1304                   ControllerBaseAddress))
1305               break;
1306             udelay(10);
1307           }
1308         if (TimeoutCounter < 0) return false;
1309         CommandStatus = DAC960_LA_ReadStatusRegister(ControllerBaseAddress);
1310         DAC960_LA_AcknowledgeHardwareMailboxInterrupt(ControllerBaseAddress);
1311         DAC960_LA_AcknowledgeHardwareMailboxStatus(ControllerBaseAddress);
1312         if (CommandStatus == DAC960_V1_NormalCompletion) return true;
1313         Controller->V1.DualModeMemoryMailboxInterface = false;
1314         CommandMailbox.TypeX.CommandOpcode2 = 0x10;
1315         break;
1316       case DAC960_PG_Controller:
1317         TimeoutCounter = TIMEOUT_COUNT;
1318         while (--TimeoutCounter >= 0)
1319           {
1320             if (!DAC960_PG_HardwareMailboxFullP(ControllerBaseAddress))
1321               break;
1322             udelay(10);
1323           }
1324         if (TimeoutCounter < 0) return false;
1325         DAC960_PG_WriteHardwareMailbox(ControllerBaseAddress, &CommandMailbox);
1326         DAC960_PG_HardwareMailboxNewCommand(ControllerBaseAddress);
1327
1328         TimeoutCounter = TIMEOUT_COUNT;
1329         while (--TimeoutCounter >= 0)
1330           {
1331             if (DAC960_PG_HardwareMailboxStatusAvailableP(
1332                   ControllerBaseAddress))
1333               break;
1334             udelay(10);
1335           }
1336         if (TimeoutCounter < 0) return false;
1337         CommandStatus = DAC960_PG_ReadStatusRegister(ControllerBaseAddress);
1338         DAC960_PG_AcknowledgeHardwareMailboxInterrupt(ControllerBaseAddress);
1339         DAC960_PG_AcknowledgeHardwareMailboxStatus(ControllerBaseAddress);
1340         if (CommandStatus == DAC960_V1_NormalCompletion) return true;
1341         Controller->V1.DualModeMemoryMailboxInterface = false;
1342         CommandMailbox.TypeX.CommandOpcode2 = 0x10;
1343         break;
1344       default:
1345         DAC960_Failure(Controller, "Unknown Controller Type\n");
1346         break;
1347       }
1348   return false;
1349 }
1350
1351
1352 /*
1353   DAC960_V2_EnableMemoryMailboxInterface enables the Memory Mailbox Interface
1354   for DAC960 V2 Firmware Controllers.
1355
1356   Aggregate the space needed for the controller's memory mailbox and
1357   the other data structures that will be targets of dma transfers with
1358   the controller.  Allocate a dma-mapped region of memory to hold these
1359   structures.  Then, save CPU pointers and dma_addr_t values to reference
1360   the structures that are contained in that region.
1361 */
1362
1363 static bool DAC960_V2_EnableMemoryMailboxInterface(DAC960_Controller_T
1364                                                       *Controller)
1365 {
1366   void __iomem *ControllerBaseAddress = Controller->BaseAddress;
1367   struct pci_dev *PCI_Device = Controller->PCIDevice;
1368   struct dma_loaf *DmaPages = &Controller->DmaPages;
1369   size_t DmaPagesSize;
1370   size_t CommandMailboxesSize;
1371   size_t StatusMailboxesSize;
1372
1373   DAC960_V2_CommandMailbox_T *CommandMailboxesMemory;
1374   dma_addr_t CommandMailboxesMemoryDMA;
1375
1376   DAC960_V2_StatusMailbox_T *StatusMailboxesMemory;
1377   dma_addr_t StatusMailboxesMemoryDMA;
1378
1379   DAC960_V2_CommandMailbox_T *CommandMailbox;
1380   dma_addr_t    CommandMailboxDMA;
1381   DAC960_V2_CommandStatus_T CommandStatus;
1382
1383         if (!pci_set_dma_mask(Controller->PCIDevice, DMA_BIT_MASK(64)))
1384                 Controller->BounceBufferLimit = DMA_BIT_MASK(64);
1385         else if (!pci_set_dma_mask(Controller->PCIDevice, DMA_BIT_MASK(32)))
1386                 Controller->BounceBufferLimit = DMA_BIT_MASK(32);
1387         else
1388                 return DAC960_Failure(Controller, "DMA mask out of range");
1389
1390   /* This is a temporary dma mapping, used only in the scope of this function */
1391   CommandMailbox = pci_alloc_consistent(PCI_Device,
1392                 sizeof(DAC960_V2_CommandMailbox_T), &CommandMailboxDMA);
1393   if (CommandMailbox == NULL)
1394           return false;
1395
1396   CommandMailboxesSize = DAC960_V2_CommandMailboxCount * sizeof(DAC960_V2_CommandMailbox_T);
1397   StatusMailboxesSize = DAC960_V2_StatusMailboxCount * sizeof(DAC960_V2_StatusMailbox_T);
1398   DmaPagesSize =
1399     CommandMailboxesSize + StatusMailboxesSize +
1400     sizeof(DAC960_V2_HealthStatusBuffer_T) +
1401     sizeof(DAC960_V2_ControllerInfo_T) +
1402     sizeof(DAC960_V2_LogicalDeviceInfo_T) +
1403     sizeof(DAC960_V2_PhysicalDeviceInfo_T) +
1404     sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T) +
1405     sizeof(DAC960_V2_Event_T) +
1406     sizeof(DAC960_V2_PhysicalToLogicalDevice_T);
1407
1408   if (!init_dma_loaf(PCI_Device, DmaPages, DmaPagesSize)) {
1409         pci_free_consistent(PCI_Device, sizeof(DAC960_V2_CommandMailbox_T),
1410                                         CommandMailbox, CommandMailboxDMA);
1411         return false;
1412   }
1413
1414   CommandMailboxesMemory = slice_dma_loaf(DmaPages,
1415                 CommandMailboxesSize, &CommandMailboxesMemoryDMA);
1416
1417   /* These are the base addresses for the command memory mailbox array */
1418   Controller->V2.FirstCommandMailbox = CommandMailboxesMemory;
1419   Controller->V2.FirstCommandMailboxDMA = CommandMailboxesMemoryDMA;
1420
1421   CommandMailboxesMemory += DAC960_V2_CommandMailboxCount - 1;
1422   Controller->V2.LastCommandMailbox = CommandMailboxesMemory;
1423   Controller->V2.NextCommandMailbox = Controller->V2.FirstCommandMailbox;
1424   Controller->V2.PreviousCommandMailbox1 = Controller->V2.LastCommandMailbox;
1425   Controller->V2.PreviousCommandMailbox2 =
1426                                         Controller->V2.LastCommandMailbox - 1;
1427
1428   /* These are the base addresses for the status memory mailbox array */
1429   StatusMailboxesMemory = slice_dma_loaf(DmaPages,
1430                 StatusMailboxesSize, &StatusMailboxesMemoryDMA);
1431
1432   Controller->V2.FirstStatusMailbox = StatusMailboxesMemory;
1433   Controller->V2.FirstStatusMailboxDMA = StatusMailboxesMemoryDMA;
1434   StatusMailboxesMemory += DAC960_V2_StatusMailboxCount - 1;
1435   Controller->V2.LastStatusMailbox = StatusMailboxesMemory;
1436   Controller->V2.NextStatusMailbox = Controller->V2.FirstStatusMailbox;
1437
1438   Controller->V2.HealthStatusBuffer = slice_dma_loaf(DmaPages,
1439                 sizeof(DAC960_V2_HealthStatusBuffer_T),
1440                 &Controller->V2.HealthStatusBufferDMA);
1441
1442   Controller->V2.NewControllerInformation = slice_dma_loaf(DmaPages,
1443                 sizeof(DAC960_V2_ControllerInfo_T),
1444                 &Controller->V2.NewControllerInformationDMA);
1445
1446   Controller->V2.NewLogicalDeviceInformation =  slice_dma_loaf(DmaPages,
1447                 sizeof(DAC960_V2_LogicalDeviceInfo_T),
1448                 &Controller->V2.NewLogicalDeviceInformationDMA);
1449
1450   Controller->V2.NewPhysicalDeviceInformation = slice_dma_loaf(DmaPages,
1451                 sizeof(DAC960_V2_PhysicalDeviceInfo_T),
1452                 &Controller->V2.NewPhysicalDeviceInformationDMA);
1453
1454   Controller->V2.NewInquiryUnitSerialNumber = slice_dma_loaf(DmaPages,
1455                 sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T),
1456                 &Controller->V2.NewInquiryUnitSerialNumberDMA);
1457
1458   Controller->V2.Event = slice_dma_loaf(DmaPages,
1459                 sizeof(DAC960_V2_Event_T),
1460                 &Controller->V2.EventDMA);
1461
1462   Controller->V2.PhysicalToLogicalDevice = slice_dma_loaf(DmaPages,
1463                 sizeof(DAC960_V2_PhysicalToLogicalDevice_T),
1464                 &Controller->V2.PhysicalToLogicalDeviceDMA);
1465
1466   /*
1467     Enable the Memory Mailbox Interface.
1468
1469     I don't know why we can't just use one of the memory mailboxes
1470     we just allocated to do this, instead of using this temporary one.
1471     Try this change later.
1472   */
1473   memset(CommandMailbox, 0, sizeof(DAC960_V2_CommandMailbox_T));
1474   CommandMailbox->SetMemoryMailbox.CommandIdentifier = 1;
1475   CommandMailbox->SetMemoryMailbox.CommandOpcode = DAC960_V2_IOCTL;
1476   CommandMailbox->SetMemoryMailbox.CommandControlBits.NoAutoRequestSense = true;
1477   CommandMailbox->SetMemoryMailbox.FirstCommandMailboxSizeKB =
1478     (DAC960_V2_CommandMailboxCount * sizeof(DAC960_V2_CommandMailbox_T)) >> 10;
1479   CommandMailbox->SetMemoryMailbox.FirstStatusMailboxSizeKB =
1480     (DAC960_V2_StatusMailboxCount * sizeof(DAC960_V2_StatusMailbox_T)) >> 10;
1481   CommandMailbox->SetMemoryMailbox.SecondCommandMailboxSizeKB = 0;
1482   CommandMailbox->SetMemoryMailbox.SecondStatusMailboxSizeKB = 0;
1483   CommandMailbox->SetMemoryMailbox.RequestSenseSize = 0;
1484   CommandMailbox->SetMemoryMailbox.IOCTL_Opcode = DAC960_V2_SetMemoryMailbox;
1485   CommandMailbox->SetMemoryMailbox.HealthStatusBufferSizeKB = 1;
1486   CommandMailbox->SetMemoryMailbox.HealthStatusBufferBusAddress =
1487                                         Controller->V2.HealthStatusBufferDMA;
1488   CommandMailbox->SetMemoryMailbox.FirstCommandMailboxBusAddress =
1489                                         Controller->V2.FirstCommandMailboxDMA;
1490   CommandMailbox->SetMemoryMailbox.FirstStatusMailboxBusAddress =
1491                                         Controller->V2.FirstStatusMailboxDMA;
1492   switch (Controller->HardwareType)
1493     {
1494     case DAC960_GEM_Controller:
1495       while (DAC960_GEM_HardwareMailboxFullP(ControllerBaseAddress))
1496         udelay(1);
1497       DAC960_GEM_WriteHardwareMailbox(ControllerBaseAddress, CommandMailboxDMA);
1498       DAC960_GEM_HardwareMailboxNewCommand(ControllerBaseAddress);
1499       while (!DAC960_GEM_HardwareMailboxStatusAvailableP(ControllerBaseAddress))
1500         udelay(1);
1501       CommandStatus = DAC960_GEM_ReadCommandStatus(ControllerBaseAddress);
1502       DAC960_GEM_AcknowledgeHardwareMailboxInterrupt(ControllerBaseAddress);
1503       DAC960_GEM_AcknowledgeHardwareMailboxStatus(ControllerBaseAddress);
1504       break;
1505     case DAC960_BA_Controller:
1506       while (DAC960_BA_HardwareMailboxFullP(ControllerBaseAddress))
1507         udelay(1);
1508       DAC960_BA_WriteHardwareMailbox(ControllerBaseAddress, CommandMailboxDMA);
1509       DAC960_BA_HardwareMailboxNewCommand(ControllerBaseAddress);
1510       while (!DAC960_BA_HardwareMailboxStatusAvailableP(ControllerBaseAddress))
1511         udelay(1);
1512       CommandStatus = DAC960_BA_ReadCommandStatus(ControllerBaseAddress);
1513       DAC960_BA_AcknowledgeHardwareMailboxInterrupt(ControllerBaseAddress);
1514       DAC960_BA_AcknowledgeHardwareMailboxStatus(ControllerBaseAddress);
1515       break;
1516     case DAC960_LP_Controller:
1517       while (DAC960_LP_HardwareMailboxFullP(ControllerBaseAddress))
1518         udelay(1);
1519       DAC960_LP_WriteHardwareMailbox(ControllerBaseAddress, CommandMailboxDMA);
1520       DAC960_LP_HardwareMailboxNewCommand(ControllerBaseAddress);
1521       while (!DAC960_LP_HardwareMailboxStatusAvailableP(ControllerBaseAddress))
1522         udelay(1);
1523       CommandStatus = DAC960_LP_ReadCommandStatus(ControllerBaseAddress);
1524       DAC960_LP_AcknowledgeHardwareMailboxInterrupt(ControllerBaseAddress);
1525       DAC960_LP_AcknowledgeHardwareMailboxStatus(ControllerBaseAddress);
1526       break;
1527     default:
1528       DAC960_Failure(Controller, "Unknown Controller Type\n");
1529       CommandStatus = DAC960_V2_AbormalCompletion;
1530       break;
1531     }
1532   pci_free_consistent(PCI_Device, sizeof(DAC960_V2_CommandMailbox_T),
1533                                         CommandMailbox, CommandMailboxDMA);
1534   return (CommandStatus == DAC960_V2_NormalCompletion);
1535 }
1536
1537
1538 /*
1539   DAC960_V1_ReadControllerConfiguration reads the Configuration Information
1540   from DAC960 V1 Firmware Controllers and initializes the Controller structure.
1541 */
1542
1543 static bool DAC960_V1_ReadControllerConfiguration(DAC960_Controller_T
1544                                                      *Controller)
1545 {
1546   DAC960_V1_Enquiry2_T *Enquiry2;
1547   dma_addr_t Enquiry2DMA;
1548   DAC960_V1_Config2_T *Config2;
1549   dma_addr_t Config2DMA;
1550   int LogicalDriveNumber, Channel, TargetID;
1551   struct dma_loaf local_dma;
1552
1553   if (!init_dma_loaf(Controller->PCIDevice, &local_dma,
1554                 sizeof(DAC960_V1_Enquiry2_T) + sizeof(DAC960_V1_Config2_T)))
1555         return DAC960_Failure(Controller, "LOGICAL DEVICE ALLOCATION");
1556
1557   Enquiry2 = slice_dma_loaf(&local_dma, sizeof(DAC960_V1_Enquiry2_T), &Enquiry2DMA);
1558   Config2 = slice_dma_loaf(&local_dma, sizeof(DAC960_V1_Config2_T), &Config2DMA);
1559
1560   if (!DAC960_V1_ExecuteType3(Controller, DAC960_V1_Enquiry,
1561                               Controller->V1.NewEnquiryDMA)) {
1562     free_dma_loaf(Controller->PCIDevice, &local_dma);
1563     return DAC960_Failure(Controller, "ENQUIRY");
1564   }
1565   memcpy(&Controller->V1.Enquiry, Controller->V1.NewEnquiry,
1566                                                 sizeof(DAC960_V1_Enquiry_T));
1567
1568   if (!DAC960_V1_ExecuteType3(Controller, DAC960_V1_Enquiry2, Enquiry2DMA)) {
1569     free_dma_loaf(Controller->PCIDevice, &local_dma);
1570     return DAC960_Failure(Controller, "ENQUIRY2");
1571   }
1572
1573   if (!DAC960_V1_ExecuteType3(Controller, DAC960_V1_ReadConfig2, Config2DMA)) {
1574     free_dma_loaf(Controller->PCIDevice, &local_dma);
1575     return DAC960_Failure(Controller, "READ CONFIG2");
1576   }
1577
1578   if (!DAC960_V1_ExecuteType3(Controller, DAC960_V1_GetLogicalDriveInformation,
1579                               Controller->V1.NewLogicalDriveInformationDMA)) {
1580     free_dma_loaf(Controller->PCIDevice, &local_dma);
1581     return DAC960_Failure(Controller, "GET LOGICAL DRIVE INFORMATION");
1582   }
1583   memcpy(&Controller->V1.LogicalDriveInformation,
1584                 Controller->V1.NewLogicalDriveInformation,
1585                 sizeof(DAC960_V1_LogicalDriveInformationArray_T));
1586
1587   for (Channel = 0; Channel < Enquiry2->ActualChannels; Channel++)
1588     for (TargetID = 0; TargetID < Enquiry2->MaxTargets; TargetID++) {
1589       if (!DAC960_V1_ExecuteType3D(Controller, DAC960_V1_GetDeviceState,
1590                                    Channel, TargetID,
1591                                    Controller->V1.NewDeviceStateDMA)) {
1592                 free_dma_loaf(Controller->PCIDevice, &local_dma);
1593                 return DAC960_Failure(Controller, "GET DEVICE STATE");
1594         }
1595         memcpy(&Controller->V1.DeviceState[Channel][TargetID],
1596                 Controller->V1.NewDeviceState, sizeof(DAC960_V1_DeviceState_T));
1597      }
1598   /*
1599     Initialize the Controller Model Name and Full Model Name fields.
1600   */
1601   switch (Enquiry2->HardwareID.SubModel)
1602     {
1603     case DAC960_V1_P_PD_PU:
1604       if (Enquiry2->SCSICapability.BusSpeed == DAC960_V1_Ultra)
1605         strcpy(Controller->ModelName, "DAC960PU");
1606       else strcpy(Controller->ModelName, "DAC960PD");
1607       break;
1608     case DAC960_V1_PL:
1609       strcpy(Controller->ModelName, "DAC960PL");
1610       break;
1611     case DAC960_V1_PG:
1612       strcpy(Controller->ModelName, "DAC960PG");
1613       break;
1614     case DAC960_V1_PJ:
1615       strcpy(Controller->ModelName, "DAC960PJ");
1616       break;
1617     case DAC960_V1_PR:
1618       strcpy(Controller->ModelName, "DAC960PR");
1619       break;
1620     case DAC960_V1_PT:
1621       strcpy(Controller->ModelName, "DAC960PT");
1622       break;
1623     case DAC960_V1_PTL0:
1624       strcpy(Controller->ModelName, "DAC960PTL0");
1625       break;
1626     case DAC960_V1_PRL:
1627       strcpy(Controller->ModelName, "DAC960PRL");
1628       break;
1629     case DAC960_V1_PTL1:
1630       strcpy(Controller->ModelName, "DAC960PTL1");
1631       break;
1632     case DAC960_V1_1164P:
1633       strcpy(Controller->ModelName, "DAC1164P");
1634       break;
1635     default:
1636       free_dma_loaf(Controller->PCIDevice, &local_dma);
1637       return DAC960_Failure(Controller, "MODEL VERIFICATION");
1638     }
1639   strcpy(Controller->FullModelName, "Mylex ");
1640   strcat(Controller->FullModelName, Controller->ModelName);
1641   /*
1642     Initialize the Controller Firmware Version field and verify that it
1643     is a supported firmware version.  The supported firmware versions are:
1644
1645     DAC1164P                5.06 and above
1646     DAC960PTL/PRL/PJ/PG     4.06 and above
1647     DAC960PU/PD/PL          3.51 and above
1648     DAC960PU/PD/PL/P        2.73 and above
1649   */
1650 #if defined(CONFIG_ALPHA)
1651   /*
1652     DEC Alpha machines were often equipped with DAC960 cards that were
1653     OEMed from Mylex, and had their own custom firmware. Version 2.70,
1654     the last custom FW revision to be released by DEC for these older
1655     controllers, appears to work quite well with this driver.
1656
1657     Cards tested successfully were several versions each of the PD and
1658     PU, called by DEC the KZPSC and KZPAC, respectively, and having
1659     the Manufacturer Numbers (from Mylex), usually on a sticker on the
1660     back of the board, of:
1661
1662     KZPSC:  D040347 (1-channel) or D040348 (2-channel) or D040349 (3-channel)
1663     KZPAC:  D040395 (1-channel) or D040396 (2-channel) or D040397 (3-channel)
1664   */
1665 # define FIRMWARE_27X   "2.70"
1666 #else
1667 # define FIRMWARE_27X   "2.73"
1668 #endif
1669
1670   if (Enquiry2->FirmwareID.MajorVersion == 0)
1671     {
1672       Enquiry2->FirmwareID.MajorVersion =
1673         Controller->V1.Enquiry.MajorFirmwareVersion;
1674       Enquiry2->FirmwareID.MinorVersion =
1675         Controller->V1.Enquiry.MinorFirmwareVersion;
1676       Enquiry2->FirmwareID.FirmwareType = '0';
1677       Enquiry2->FirmwareID.TurnID = 0;
1678     }
1679   sprintf(Controller->FirmwareVersion, "%d.%02d-%c-%02d",
1680           Enquiry2->FirmwareID.MajorVersion, Enquiry2->FirmwareID.MinorVersion,
1681           Enquiry2->FirmwareID.FirmwareType, Enquiry2->FirmwareID.TurnID);
1682   if (!((Controller->FirmwareVersion[0] == '5' &&
1683          strcmp(Controller->FirmwareVersion, "5.06") >= 0) ||
1684         (Controller->FirmwareVersion[0] == '4' &&
1685          strcmp(Controller->FirmwareVersion, "4.06") >= 0) ||
1686         (Controller->FirmwareVersion[0] == '3' &&
1687          strcmp(Controller->FirmwareVersion, "3.51") >= 0) ||
1688         (Controller->FirmwareVersion[0] == '2' &&
1689          strcmp(Controller->FirmwareVersion, FIRMWARE_27X) >= 0)))
1690     {
1691       DAC960_Failure(Controller, "FIRMWARE VERSION VERIFICATION");
1692       DAC960_Error("Firmware Version = '%s'\n", Controller,
1693                    Controller->FirmwareVersion);
1694       free_dma_loaf(Controller->PCIDevice, &local_dma);
1695       return false;
1696     }
1697   /*
1698     Initialize the Controller Channels, Targets, Memory Size, and SAF-TE
1699     Enclosure Management Enabled fields.
1700   */
1701   Controller->Channels = Enquiry2->ActualChannels;
1702   Controller->Targets = Enquiry2->MaxTargets;
1703   Controller->MemorySize = Enquiry2->MemorySize >> 20;
1704   Controller->V1.SAFTE_EnclosureManagementEnabled =
1705     (Enquiry2->FaultManagementType == DAC960_V1_SAFTE);
1706   /*
1707     Initialize the Controller Queue Depth, Driver Queue Depth, Logical Drive
1708     Count, Maximum Blocks per Command, Controller Scatter/Gather Limit, and
1709     Driver Scatter/Gather Limit.  The Driver Queue Depth must be at most one
1710     less than the Controller Queue Depth to allow for an automatic drive
1711     rebuild operation.
1712   */
1713   Controller->ControllerQueueDepth = Controller->V1.Enquiry.MaxCommands;
1714   Controller->DriverQueueDepth = Controller->ControllerQueueDepth - 1;
1715   if (Controller->DriverQueueDepth > DAC960_MaxDriverQueueDepth)
1716     Controller->DriverQueueDepth = DAC960_MaxDriverQueueDepth;
1717   Controller->LogicalDriveCount =
1718     Controller->V1.Enquiry.NumberOfLogicalDrives;
1719   Controller->MaxBlocksPerCommand = Enquiry2->MaxBlocksPerCommand;
1720   Controller->ControllerScatterGatherLimit = Enquiry2->MaxScatterGatherEntries;
1721   Controller->DriverScatterGatherLimit =
1722     Controller->ControllerScatterGatherLimit;
1723   if (Controller->DriverScatterGatherLimit > DAC960_V1_ScatterGatherLimit)
1724     Controller->DriverScatterGatherLimit = DAC960_V1_ScatterGatherLimit;
1725   /*
1726     Initialize the Stripe Size, Segment Size, and Geometry Translation.
1727   */
1728   Controller->V1.StripeSize = Config2->BlocksPerStripe * Config2->BlockFactor
1729                               >> (10 - DAC960_BlockSizeBits);
1730   Controller->V1.SegmentSize = Config2->BlocksPerCacheLine * Config2->BlockFactor
1731                                >> (10 - DAC960_BlockSizeBits);
1732   switch (Config2->DriveGeometry)
1733     {
1734     case DAC960_V1_Geometry_128_32:
1735       Controller->V1.GeometryTranslationHeads = 128;
1736       Controller->V1.GeometryTranslationSectors = 32;
1737       break;
1738     case DAC960_V1_Geometry_255_63:
1739       Controller->V1.GeometryTranslationHeads = 255;
1740       Controller->V1.GeometryTranslationSectors = 63;
1741       break;
1742     default:
1743       free_dma_loaf(Controller->PCIDevice, &local_dma);
1744       return DAC960_Failure(Controller, "CONFIG2 DRIVE GEOMETRY");
1745     }
1746   /*
1747     Initialize the Background Initialization Status.
1748   */
1749   if ((Controller->FirmwareVersion[0] == '4' &&
1750       strcmp(Controller->FirmwareVersion, "4.08") >= 0) ||
1751       (Controller->FirmwareVersion[0] == '5' &&
1752        strcmp(Controller->FirmwareVersion, "5.08") >= 0))
1753     {
1754       Controller->V1.BackgroundInitializationStatusSupported = true;
1755       DAC960_V1_ExecuteType3B(Controller,
1756                               DAC960_V1_BackgroundInitializationControl, 0x20,
1757                               Controller->
1758                                V1.BackgroundInitializationStatusDMA);
1759       memcpy(&Controller->V1.LastBackgroundInitializationStatus,
1760                 Controller->V1.BackgroundInitializationStatus,
1761                 sizeof(DAC960_V1_BackgroundInitializationStatus_T));
1762     }
1763   /*
1764     Initialize the Logical Drive Initially Accessible flag.
1765   */
1766   for (LogicalDriveNumber = 0;
1767        LogicalDriveNumber < Controller->LogicalDriveCount;
1768        LogicalDriveNumber++)
1769     if (Controller->V1.LogicalDriveInformation
1770                        [LogicalDriveNumber].LogicalDriveState !=
1771         DAC960_V1_LogicalDrive_Offline)
1772       Controller->LogicalDriveInitiallyAccessible[LogicalDriveNumber] = true;
1773   Controller->V1.LastRebuildStatus = DAC960_V1_NoRebuildOrCheckInProgress;
1774   free_dma_loaf(Controller->PCIDevice, &local_dma);
1775   return true;
1776 }
1777
1778
1779 /*
1780   DAC960_V2_ReadControllerConfiguration reads the Configuration Information
1781   from DAC960 V2 Firmware Controllers and initializes the Controller structure.
1782 */
1783
1784 static bool DAC960_V2_ReadControllerConfiguration(DAC960_Controller_T
1785                                                      *Controller)
1786 {
1787   DAC960_V2_ControllerInfo_T *ControllerInfo =
1788                 &Controller->V2.ControllerInformation;
1789   unsigned short LogicalDeviceNumber = 0;
1790   int ModelNameLength;
1791
1792   /* Get data into dma-able area, then copy into permanant location */
1793   if (!DAC960_V2_NewControllerInfo(Controller))
1794     return DAC960_Failure(Controller, "GET CONTROLLER INFO");
1795   memcpy(ControllerInfo, Controller->V2.NewControllerInformation,
1796                         sizeof(DAC960_V2_ControllerInfo_T));
1797
1798
1799   if (!DAC960_V2_GeneralInfo(Controller))
1800     return DAC960_Failure(Controller, "GET HEALTH STATUS");
1801
1802   /*
1803     Initialize the Controller Model Name and Full Model Name fields.
1804   */
1805   ModelNameLength = sizeof(ControllerInfo->ControllerName);
1806   if (ModelNameLength > sizeof(Controller->ModelName)-1)
1807     ModelNameLength = sizeof(Controller->ModelName)-1;
1808   memcpy(Controller->ModelName, ControllerInfo->ControllerName,
1809          ModelNameLength);
1810   ModelNameLength--;
1811   while (Controller->ModelName[ModelNameLength] == ' ' ||
1812          Controller->ModelName[ModelNameLength] == '\0')
1813     ModelNameLength--;
1814   Controller->ModelName[++ModelNameLength] = '\0';
1815   strcpy(Controller->FullModelName, "Mylex ");
1816   strcat(Controller->FullModelName, Controller->ModelName);
1817   /*
1818     Initialize the Controller Firmware Version field.
1819   */
1820   sprintf(Controller->FirmwareVersion, "%d.%02d-%02d",
1821           ControllerInfo->FirmwareMajorVersion,
1822           ControllerInfo->FirmwareMinorVersion,
1823           ControllerInfo->FirmwareTurnNumber);
1824   if (ControllerInfo->FirmwareMajorVersion == 6 &&
1825       ControllerInfo->FirmwareMinorVersion == 0 &&
1826       ControllerInfo->FirmwareTurnNumber < 1)
1827     {
1828       DAC960_Info("FIRMWARE VERSION %s DOES NOT PROVIDE THE CONTROLLER\n",
1829                   Controller, Controller->FirmwareVersion);
1830       DAC960_Info("STATUS MONITORING FUNCTIONALITY NEEDED BY THIS DRIVER.\n",
1831                   Controller);
1832       DAC960_Info("PLEASE UPGRADE TO VERSION 6.00-01 OR ABOVE.\n",
1833                   Controller);
1834     }
1835   /*
1836     Initialize the Controller Channels, Targets, and Memory Size.
1837   */
1838   Controller->Channels = ControllerInfo->NumberOfPhysicalChannelsPresent;
1839   Controller->Targets =
1840     ControllerInfo->MaximumTargetsPerChannel
1841                     [ControllerInfo->NumberOfPhysicalChannelsPresent-1];
1842   Controller->MemorySize = ControllerInfo->MemorySizeMB;
1843   /*
1844     Initialize the Controller Queue Depth, Driver Queue Depth, Logical Drive
1845     Count, Maximum Blocks per Command, Controller Scatter/Gather Limit, and
1846     Driver Scatter/Gather Limit.  The Driver Queue Depth must be at most one
1847     less than the Controller Queue Depth to allow for an automatic drive
1848     rebuild operation.
1849   */
1850   Controller->ControllerQueueDepth = ControllerInfo->MaximumParallelCommands;
1851   Controller->DriverQueueDepth = Controller->ControllerQueueDepth - 1;
1852   if (Controller->DriverQueueDepth > DAC960_MaxDriverQueueDepth)
1853     Controller->DriverQueueDepth = DAC960_MaxDriverQueueDepth;
1854   Controller->LogicalDriveCount = ControllerInfo->LogicalDevicesPresent;
1855   Controller->MaxBlocksPerCommand =
1856     ControllerInfo->MaximumDataTransferSizeInBlocks;
1857   Controller->ControllerScatterGatherLimit =
1858     ControllerInfo->MaximumScatterGatherEntries;
1859   Controller->DriverScatterGatherLimit =
1860     Controller->ControllerScatterGatherLimit;
1861   if (Controller->DriverScatterGatherLimit > DAC960_V2_ScatterGatherLimit)
1862     Controller->DriverScatterGatherLimit = DAC960_V2_ScatterGatherLimit;
1863   /*
1864     Initialize the Logical Device Information.
1865   */
1866   while (true)
1867     {
1868       DAC960_V2_LogicalDeviceInfo_T *NewLogicalDeviceInfo =
1869         Controller->V2.NewLogicalDeviceInformation;
1870       DAC960_V2_LogicalDeviceInfo_T *LogicalDeviceInfo;
1871       DAC960_V2_PhysicalDevice_T PhysicalDevice;
1872
1873       if (!DAC960_V2_NewLogicalDeviceInfo(Controller, LogicalDeviceNumber))
1874         break;
1875       LogicalDeviceNumber = NewLogicalDeviceInfo->LogicalDeviceNumber;
1876       if (LogicalDeviceNumber >= DAC960_MaxLogicalDrives) {
1877         DAC960_Error("DAC960: Logical Drive Number %d not supported\n",
1878                        Controller, LogicalDeviceNumber);
1879                 break;
1880       }
1881       if (NewLogicalDeviceInfo->DeviceBlockSizeInBytes != DAC960_BlockSize) {
1882         DAC960_Error("DAC960: Logical Drive Block Size %d not supported\n",
1883               Controller, NewLogicalDeviceInfo->DeviceBlockSizeInBytes);
1884         LogicalDeviceNumber++;
1885         continue;
1886       }
1887       PhysicalDevice.Controller = 0;
1888       PhysicalDevice.Channel = NewLogicalDeviceInfo->Channel;
1889       PhysicalDevice.TargetID = NewLogicalDeviceInfo->TargetID;
1890       PhysicalDevice.LogicalUnit = NewLogicalDeviceInfo->LogicalUnit;
1891       Controller->V2.LogicalDriveToVirtualDevice[LogicalDeviceNumber] =
1892         PhysicalDevice;
1893       if (NewLogicalDeviceInfo->LogicalDeviceState !=
1894           DAC960_V2_LogicalDevice_Offline)
1895         Controller->LogicalDriveInitiallyAccessible[LogicalDeviceNumber] = true;
1896       LogicalDeviceInfo = kmalloc(sizeof(DAC960_V2_LogicalDeviceInfo_T),
1897                                    GFP_ATOMIC);
1898       if (LogicalDeviceInfo == NULL)
1899         return DAC960_Failure(Controller, "LOGICAL DEVICE ALLOCATION");
1900       Controller->V2.LogicalDeviceInformation[LogicalDeviceNumber] =
1901         LogicalDeviceInfo;
1902       memcpy(LogicalDeviceInfo, NewLogicalDeviceInfo,
1903              sizeof(DAC960_V2_LogicalDeviceInfo_T));
1904       LogicalDeviceNumber++;
1905     }
1906   return true;
1907 }
1908
1909
1910 /*
1911   DAC960_ReportControllerConfiguration reports the Configuration Information
1912   for Controller.
1913 */
1914
1915 static bool DAC960_ReportControllerConfiguration(DAC960_Controller_T
1916                                                     *Controller)
1917 {
1918   DAC960_Info("Configuring Mylex %s PCI RAID Controller\n",
1919               Controller, Controller->ModelName);
1920   DAC960_Info("  Firmware Version: %s, Channels: %d, Memory Size: %dMB\n",
1921               Controller, Controller->FirmwareVersion,
1922               Controller->Channels, Controller->MemorySize);
1923   DAC960_Info("  PCI Bus: %d, Device: %d, Function: %d, I/O Address: ",
1924               Controller, Controller->Bus,
1925               Controller->Device, Controller->Function);
1926   if (Controller->IO_Address == 0)
1927     DAC960_Info("Unassigned\n", Controller);
1928   else DAC960_Info("0x%X\n", Controller, Controller->IO_Address);
1929   DAC960_Info("  PCI Address: 0x%X mapped at 0x%lX, IRQ Channel: %d\n",
1930               Controller, Controller->PCI_Address,
1931               (unsigned long) Controller->BaseAddress,
1932               Controller->IRQ_Channel);
1933   DAC960_Info("  Controller Queue Depth: %d, "
1934               "Maximum Blocks per Command: %d\n",
1935               Controller, Controller->ControllerQueueDepth,
1936               Controller->MaxBlocksPerCommand);
1937   DAC960_Info("  Driver Queue Depth: %d, "
1938               "Scatter/Gather Limit: %d of %d Segments\n",
1939               Controller, Controller->DriverQueueDepth,
1940               Controller->DriverScatterGatherLimit,
1941               Controller->ControllerScatterGatherLimit);
1942   if (Controller->FirmwareType == DAC960_V1_Controller)
1943     {
1944       DAC960_Info("  Stripe Size: %dKB, Segment Size: %dKB, "
1945                   "BIOS Geometry: %d/%d\n", Controller,
1946                   Controller->V1.StripeSize,
1947                   Controller->V1.SegmentSize,
1948                   Controller->V1.GeometryTranslationHeads,
1949                   Controller->V1.GeometryTranslationSectors);
1950       if (Controller->V1.SAFTE_EnclosureManagementEnabled)
1951         DAC960_Info("  SAF-TE Enclosure Management Enabled\n", Controller);
1952     }
1953   return true;
1954 }
1955
1956
1957 /*
1958   DAC960_V1_ReadDeviceConfiguration reads the Device Configuration Information
1959   for DAC960 V1 Firmware Controllers by requesting the SCSI Inquiry and SCSI
1960   Inquiry Unit Serial Number information for each device connected to
1961   Controller.
1962 */
1963
1964 static bool DAC960_V1_ReadDeviceConfiguration(DAC960_Controller_T
1965                                                  *Controller)
1966 {
1967   struct dma_loaf local_dma;
1968
1969   dma_addr_t DCDBs_dma[DAC960_V1_MaxChannels];
1970   DAC960_V1_DCDB_T *DCDBs_cpu[DAC960_V1_MaxChannels];
1971
1972   dma_addr_t SCSI_Inquiry_dma[DAC960_V1_MaxChannels];
1973   DAC960_SCSI_Inquiry_T *SCSI_Inquiry_cpu[DAC960_V1_MaxChannels];
1974
1975   dma_addr_t SCSI_NewInquiryUnitSerialNumberDMA[DAC960_V1_MaxChannels];
1976   DAC960_SCSI_Inquiry_UnitSerialNumber_T *SCSI_NewInquiryUnitSerialNumberCPU[DAC960_V1_MaxChannels];
1977
1978   struct completion Completions[DAC960_V1_MaxChannels];
1979   unsigned long flags;
1980   int Channel, TargetID;
1981
1982   if (!init_dma_loaf(Controller->PCIDevice, &local_dma,
1983                 DAC960_V1_MaxChannels*(sizeof(DAC960_V1_DCDB_T) +
1984                         sizeof(DAC960_SCSI_Inquiry_T) +
1985                         sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T))))
1986      return DAC960_Failure(Controller,
1987                         "DMA ALLOCATION FAILED IN ReadDeviceConfiguration");
1988
1989   for (Channel = 0; Channel < Controller->Channels; Channel++) {
1990         DCDBs_cpu[Channel] = slice_dma_loaf(&local_dma,
1991                         sizeof(DAC960_V1_DCDB_T), DCDBs_dma + Channel);
1992         SCSI_Inquiry_cpu[Channel] = slice_dma_loaf(&local_dma,
1993                         sizeof(DAC960_SCSI_Inquiry_T),
1994                         SCSI_Inquiry_dma + Channel);
1995         SCSI_NewInquiryUnitSerialNumberCPU[Channel] = slice_dma_loaf(&local_dma,
1996                         sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T),
1997                         SCSI_NewInquiryUnitSerialNumberDMA + Channel);
1998   }
1999
2000   for (TargetID = 0; TargetID < Controller->Targets; TargetID++)
2001     {
2002       /*
2003        * For each channel, submit a probe for a device on that channel.
2004        * The timeout interval for a device that is present is 10 seconds.
2005        * With this approach, the timeout periods can elapse in parallel
2006        * on each channel.
2007        */
2008       for (Channel = 0; Channel < Controller->Channels; Channel++)
2009         {
2010           dma_addr_t NewInquiryStandardDataDMA = SCSI_Inquiry_dma[Channel];
2011           DAC960_V1_DCDB_T *DCDB = DCDBs_cpu[Channel];
2012           dma_addr_t DCDB_dma = DCDBs_dma[Channel];
2013           DAC960_Command_T *Command = Controller->Commands[Channel];
2014           struct completion *Completion = &Completions[Channel];
2015
2016           init_completion(Completion);
2017           DAC960_V1_ClearCommand(Command);
2018           Command->CommandType = DAC960_ImmediateCommand;
2019           Command->Completion = Completion;
2020           Command->V1.CommandMailbox.Type3.CommandOpcode = DAC960_V1_DCDB;
2021           Command->V1.CommandMailbox.Type3.BusAddress = DCDB_dma;
2022           DCDB->Channel = Channel;
2023           DCDB->TargetID = TargetID;
2024           DCDB->Direction = DAC960_V1_DCDB_DataTransferDeviceToSystem;
2025           DCDB->EarlyStatus = false;
2026           DCDB->Timeout = DAC960_V1_DCDB_Timeout_10_seconds;
2027           DCDB->NoAutomaticRequestSense = false;
2028           DCDB->DisconnectPermitted = true;
2029           DCDB->TransferLength = sizeof(DAC960_SCSI_Inquiry_T);
2030           DCDB->BusAddress = NewInquiryStandardDataDMA;
2031           DCDB->CDBLength = 6;
2032           DCDB->TransferLengthHigh4 = 0;
2033           DCDB->SenseLength = sizeof(DCDB->SenseData);
2034           DCDB->CDB[0] = 0x12; /* INQUIRY */
2035           DCDB->CDB[1] = 0; /* EVPD = 0 */
2036           DCDB->CDB[2] = 0; /* Page Code */
2037           DCDB->CDB[3] = 0; /* Reserved */
2038           DCDB->CDB[4] = sizeof(DAC960_SCSI_Inquiry_T);
2039           DCDB->CDB[5] = 0; /* Control */
2040
2041           spin_lock_irqsave(&Controller->queue_lock, flags);
2042           DAC960_QueueCommand(Command);
2043           spin_unlock_irqrestore(&Controller->queue_lock, flags);
2044         }
2045       /*
2046        * Wait for the problems submitted in the previous loop
2047        * to complete.  On the probes that are successful,
2048        * get the serial number of the device that was found.
2049        */
2050       for (Channel = 0; Channel < Controller->Channels; Channel++)
2051         {
2052           DAC960_SCSI_Inquiry_T *InquiryStandardData =
2053             &Controller->V1.InquiryStandardData[Channel][TargetID];
2054           DAC960_SCSI_Inquiry_T *NewInquiryStandardData = SCSI_Inquiry_cpu[Channel];
2055           dma_addr_t NewInquiryUnitSerialNumberDMA =
2056                         SCSI_NewInquiryUnitSerialNumberDMA[Channel];
2057           DAC960_SCSI_Inquiry_UnitSerialNumber_T *NewInquiryUnitSerialNumber =
2058                         SCSI_NewInquiryUnitSerialNumberCPU[Channel];
2059           DAC960_SCSI_Inquiry_UnitSerialNumber_T *InquiryUnitSerialNumber =
2060             &Controller->V1.InquiryUnitSerialNumber[Channel][TargetID];
2061           DAC960_Command_T *Command = Controller->Commands[Channel];
2062           DAC960_V1_DCDB_T *DCDB = DCDBs_cpu[Channel];
2063           struct completion *Completion = &Completions[Channel];
2064
2065           wait_for_completion(Completion);
2066
2067           if (Command->V1.CommandStatus != DAC960_V1_NormalCompletion) {
2068             memset(InquiryStandardData, 0, sizeof(DAC960_SCSI_Inquiry_T));
2069             InquiryStandardData->PeripheralDeviceType = 0x1F;
2070             continue;
2071           } else
2072             memcpy(InquiryStandardData, NewInquiryStandardData, sizeof(DAC960_SCSI_Inquiry_T));
2073
2074           /* Preserve Channel and TargetID values from the previous loop */
2075           Command->Completion = Completion;
2076           DCDB->TransferLength = sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T);
2077           DCDB->BusAddress = NewInquiryUnitSerialNumberDMA;
2078           DCDB->SenseLength = sizeof(DCDB->SenseData);
2079           DCDB->CDB[0] = 0x12; /* INQUIRY */
2080           DCDB->CDB[1] = 1; /* EVPD = 1 */
2081           DCDB->CDB[2] = 0x80; /* Page Code */
2082           DCDB->CDB[3] = 0; /* Reserved */
2083           DCDB->CDB[4] = sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T);
2084           DCDB->CDB[5] = 0; /* Control */
2085
2086           spin_lock_irqsave(&Controller->queue_lock, flags);
2087           DAC960_QueueCommand(Command);
2088           spin_unlock_irqrestore(&Controller->queue_lock, flags);
2089           wait_for_completion(Completion);
2090
2091           if (Command->V1.CommandStatus != DAC960_V1_NormalCompletion) {
2092                 memset(InquiryUnitSerialNumber, 0,
2093                         sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T));
2094                 InquiryUnitSerialNumber->PeripheralDeviceType = 0x1F;
2095           } else
2096                 memcpy(InquiryUnitSerialNumber, NewInquiryUnitSerialNumber,
2097                         sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T));
2098         }
2099     }
2100     free_dma_loaf(Controller->PCIDevice, &local_dma);
2101   return true;
2102 }
2103
2104
2105 /*
2106   DAC960_V2_ReadDeviceConfiguration reads the Device Configuration Information
2107   for DAC960 V2 Firmware Controllers by requesting the Physical Device
2108   Information and SCSI Inquiry Unit Serial Number information for each
2109   device connected to Controller.
2110 */
2111
2112 static bool DAC960_V2_ReadDeviceConfiguration(DAC960_Controller_T
2113                                                  *Controller)
2114 {
2115   unsigned char Channel = 0, TargetID = 0, LogicalUnit = 0;
2116   unsigned short PhysicalDeviceIndex = 0;
2117
2118   while (true)
2119     {
2120       DAC960_V2_PhysicalDeviceInfo_T *NewPhysicalDeviceInfo =
2121                 Controller->V2.NewPhysicalDeviceInformation;
2122       DAC960_V2_PhysicalDeviceInfo_T *PhysicalDeviceInfo;
2123       DAC960_SCSI_Inquiry_UnitSerialNumber_T *NewInquiryUnitSerialNumber =
2124                 Controller->V2.NewInquiryUnitSerialNumber;
2125       DAC960_SCSI_Inquiry_UnitSerialNumber_T *InquiryUnitSerialNumber;
2126
2127       if (!DAC960_V2_NewPhysicalDeviceInfo(Controller, Channel, TargetID, LogicalUnit))
2128           break;
2129
2130       PhysicalDeviceInfo = kmalloc(sizeof(DAC960_V2_PhysicalDeviceInfo_T),
2131                                     GFP_ATOMIC);
2132       if (PhysicalDeviceInfo == NULL)
2133                 return DAC960_Failure(Controller, "PHYSICAL DEVICE ALLOCATION");
2134       Controller->V2.PhysicalDeviceInformation[PhysicalDeviceIndex] =
2135                 PhysicalDeviceInfo;
2136       memcpy(PhysicalDeviceInfo, NewPhysicalDeviceInfo,
2137                 sizeof(DAC960_V2_PhysicalDeviceInfo_T));
2138
2139       InquiryUnitSerialNumber = kmalloc(
2140               sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T), GFP_ATOMIC);
2141       if (InquiryUnitSerialNumber == NULL) {
2142         kfree(PhysicalDeviceInfo);
2143         return DAC960_Failure(Controller, "SERIAL NUMBER ALLOCATION");
2144       }
2145       Controller->V2.InquiryUnitSerialNumber[PhysicalDeviceIndex] =
2146                 InquiryUnitSerialNumber;
2147
2148       Channel = NewPhysicalDeviceInfo->Channel;
2149       TargetID = NewPhysicalDeviceInfo->TargetID;
2150       LogicalUnit = NewPhysicalDeviceInfo->LogicalUnit;
2151
2152       /*
2153          Some devices do NOT have Unit Serial Numbers.
2154          This command fails for them.  But, we still want to
2155          remember those devices are there.  Construct a
2156          UnitSerialNumber structure for the failure case.
2157       */
2158       if (!DAC960_V2_NewInquiryUnitSerialNumber(Controller, Channel, TargetID, LogicalUnit)) {
2159         memset(InquiryUnitSerialNumber, 0,
2160              sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T));
2161         InquiryUnitSerialNumber->PeripheralDeviceType = 0x1F;
2162       } else
2163         memcpy(InquiryUnitSerialNumber, NewInquiryUnitSerialNumber,
2164                 sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T));
2165
2166       PhysicalDeviceIndex++;
2167       LogicalUnit++;
2168     }
2169   return true;
2170 }
2171
2172
2173 /*
2174   DAC960_SanitizeInquiryData sanitizes the Vendor, Model, Revision, and
2175   Product Serial Number fields of the Inquiry Standard Data and Inquiry
2176   Unit Serial Number structures.
2177 */
2178
2179 static void DAC960_SanitizeInquiryData(DAC960_SCSI_Inquiry_T
2180                                          *InquiryStandardData,
2181                                        DAC960_SCSI_Inquiry_UnitSerialNumber_T
2182                                          *InquiryUnitSerialNumber,
2183                                        unsigned char *Vendor,
2184                                        unsigned char *Model,
2185                                        unsigned char *Revision,
2186                                        unsigned char *SerialNumber)
2187 {
2188   int SerialNumberLength, i;
2189   if (InquiryStandardData->PeripheralDeviceType == 0x1F) return;
2190   for (i = 0; i < sizeof(InquiryStandardData->VendorIdentification); i++)
2191     {
2192       unsigned char VendorCharacter =
2193         InquiryStandardData->VendorIdentification[i];
2194       Vendor[i] = (VendorCharacter >= ' ' && VendorCharacter <= '~'
2195                    ? VendorCharacter : ' ');
2196     }
2197   Vendor[sizeof(InquiryStandardData->VendorIdentification)] = '\0';
2198   for (i = 0; i < sizeof(InquiryStandardData->ProductIdentification); i++)
2199     {
2200       unsigned char ModelCharacter =
2201         InquiryStandardData->ProductIdentification[i];
2202       Model[i] = (ModelCharacter >= ' ' && ModelCharacter <= '~'
2203                   ? ModelCharacter : ' ');
2204     }
2205   Model[sizeof(InquiryStandardData->ProductIdentification)] = '\0';
2206   for (i = 0; i < sizeof(InquiryStandardData->ProductRevisionLevel); i++)
2207     {
2208       unsigned char RevisionCharacter =
2209         InquiryStandardData->ProductRevisionLevel[i];
2210       Revision[i] = (RevisionCharacter >= ' ' && RevisionCharacter <= '~'
2211                      ? RevisionCharacter : ' ');
2212     }
2213   Revision[sizeof(InquiryStandardData->ProductRevisionLevel)] = '\0';
2214   if (InquiryUnitSerialNumber->PeripheralDeviceType == 0x1F) return;
2215   SerialNumberLength = InquiryUnitSerialNumber->PageLength;
2216   if (SerialNumberLength >
2217       sizeof(InquiryUnitSerialNumber->ProductSerialNumber))
2218     SerialNumberLength = sizeof(InquiryUnitSerialNumber->ProductSerialNumber);
2219   for (i = 0; i < SerialNumberLength; i++)
2220     {
2221       unsigned char SerialNumberCharacter =
2222         InquiryUnitSerialNumber->ProductSerialNumber[i];
2223       SerialNumber[i] =
2224         (SerialNumberCharacter >= ' ' && SerialNumberCharacter <= '~'
2225          ? SerialNumberCharacter : ' ');
2226     }
2227   SerialNumber[SerialNumberLength] = '\0';
2228 }
2229
2230
2231 /*
2232   DAC960_V1_ReportDeviceConfiguration reports the Device Configuration
2233   Information for DAC960 V1 Firmware Controllers.
2234 */
2235
2236 static bool DAC960_V1_ReportDeviceConfiguration(DAC960_Controller_T
2237                                                    *Controller)
2238 {
2239   int LogicalDriveNumber, Channel, TargetID;
2240   DAC960_Info("  Physical Devices:\n", Controller);
2241   for (Channel = 0; Channel < Controller->Channels; Channel++)
2242     for (TargetID = 0; TargetID < Controller->Targets; TargetID++)
2243       {
2244         DAC960_SCSI_Inquiry_T *InquiryStandardData =
2245           &Controller->V1.InquiryStandardData[Channel][TargetID];
2246         DAC960_SCSI_Inquiry_UnitSerialNumber_T *InquiryUnitSerialNumber =
2247           &Controller->V1.InquiryUnitSerialNumber[Channel][TargetID];
2248         DAC960_V1_DeviceState_T *DeviceState =
2249           &Controller->V1.DeviceState[Channel][TargetID];
2250         DAC960_V1_ErrorTableEntry_T *ErrorEntry =
2251           &Controller->V1.ErrorTable.ErrorTableEntries[Channel][TargetID];
2252         char Vendor[1+sizeof(InquiryStandardData->VendorIdentification)];
2253         char Model[1+sizeof(InquiryStandardData->ProductIdentification)];
2254         char Revision[1+sizeof(InquiryStandardData->ProductRevisionLevel)];
2255         char SerialNumber[1+sizeof(InquiryUnitSerialNumber
2256                                    ->ProductSerialNumber)];
2257         if (InquiryStandardData->PeripheralDeviceType == 0x1F) continue;
2258         DAC960_SanitizeInquiryData(InquiryStandardData, InquiryUnitSerialNumber,
2259                                    Vendor, Model, Revision, SerialNumber);
2260         DAC960_Info("    %d:%d%s Vendor: %s  Model: %s  Revision: %s\n",
2261                     Controller, Channel, TargetID, (TargetID < 10 ? " " : ""),
2262                     Vendor, Model, Revision);
2263         if (InquiryUnitSerialNumber->PeripheralDeviceType != 0x1F)
2264           DAC960_Info("         Serial Number: %s\n", Controller, SerialNumber);
2265         if (DeviceState->Present &&
2266             DeviceState->DeviceType == DAC960_V1_DiskType)
2267           {
2268             if (Controller->V1.DeviceResetCount[Channel][TargetID] > 0)
2269               DAC960_Info("         Disk Status: %s, %u blocks, %d resets\n",
2270                           Controller,
2271                           (DeviceState->DeviceState == DAC960_V1_Device_Dead
2272                            ? "Dead"
2273                            : DeviceState->DeviceState
2274                              == DAC960_V1_Device_WriteOnly
2275                              ? "Write-Only"
2276                              : DeviceState->DeviceState
2277                                == DAC960_V1_Device_Online
2278                                ? "Online" : "Standby"),
2279                           DeviceState->DiskSize,
2280                           Controller->V1.DeviceResetCount[Channel][TargetID]);
2281             else
2282               DAC960_Info("         Disk Status: %s, %u blocks\n", Controller,
2283                           (DeviceState->DeviceState == DAC960_V1_Device_Dead
2284                            ? "Dead"
2285                            : DeviceState->DeviceState
2286                              == DAC960_V1_Device_WriteOnly
2287                              ? "Write-Only"
2288                              : DeviceState->DeviceState
2289                                == DAC960_V1_Device_Online
2290                                ? "Online" : "Standby"),
2291                           DeviceState->DiskSize);
2292           }
2293         if (ErrorEntry->ParityErrorCount > 0 ||
2294             ErrorEntry->SoftErrorCount > 0 ||
2295             ErrorEntry->HardErrorCount > 0 ||
2296             ErrorEntry->MiscErrorCount > 0)
2297           DAC960_Info("         Errors - Parity: %d, Soft: %d, "
2298                       "Hard: %d, Misc: %d\n", Controller,
2299                       ErrorEntry->ParityErrorCount,
2300                       ErrorEntry->SoftErrorCount,
2301                       ErrorEntry->HardErrorCount,
2302                       ErrorEntry->MiscErrorCount);
2303       }
2304   DAC960_Info("  Logical Drives:\n", Controller);
2305   for (LogicalDriveNumber = 0;
2306        LogicalDriveNumber < Controller->LogicalDriveCount;
2307        LogicalDriveNumber++)
2308     {
2309       DAC960_V1_LogicalDriveInformation_T *LogicalDriveInformation =
2310         &Controller->V1.LogicalDriveInformation[LogicalDriveNumber];
2311       DAC960_Info("    /dev/rd/c%dd%d: RAID-%d, %s, %u blocks, %s\n",
2312                   Controller, Controller->ControllerNumber, LogicalDriveNumber,
2313                   LogicalDriveInformation->RAIDLevel,
2314                   (LogicalDriveInformation->LogicalDriveState
2315                    == DAC960_V1_LogicalDrive_Online
2316                    ? "Online"
2317                    : LogicalDriveInformation->LogicalDriveState
2318                      == DAC960_V1_LogicalDrive_Critical
2319                      ? "Critical" : "Offline"),
2320                   LogicalDriveInformation->LogicalDriveSize,
2321                   (LogicalDriveInformation->WriteBack
2322                    ? "Write Back" : "Write Thru"));
2323     }
2324   return true;
2325 }
2326
2327
2328 /*
2329   DAC960_V2_ReportDeviceConfiguration reports the Device Configuration
2330   Information for DAC960 V2 Firmware Controllers.
2331 */
2332
2333 static bool DAC960_V2_ReportDeviceConfiguration(DAC960_Controller_T
2334                                                    *Controller)
2335 {
2336   int PhysicalDeviceIndex, LogicalDriveNumber;
2337   DAC960_Info("  Physical Devices:\n", Controller);
2338   for (PhysicalDeviceIndex = 0;
2339        PhysicalDeviceIndex < DAC960_V2_MaxPhysicalDevices;
2340        PhysicalDeviceIndex++)
2341     {
2342       DAC960_V2_PhysicalDeviceInfo_T *PhysicalDeviceInfo =
2343         Controller->V2.PhysicalDeviceInformation[PhysicalDeviceIndex];
2344       DAC960_SCSI_Inquiry_T *InquiryStandardData =
2345         (DAC960_SCSI_Inquiry_T *) &PhysicalDeviceInfo->SCSI_InquiryData;
2346       DAC960_SCSI_Inquiry_UnitSerialNumber_T *InquiryUnitSerialNumber =
2347         Controller->V2.InquiryUnitSerialNumber[PhysicalDeviceIndex];
2348       char Vendor[1+sizeof(InquiryStandardData->VendorIdentification)];
2349       char Model[1+sizeof(InquiryStandardData->ProductIdentification)];
2350       char Revision[1+sizeof(InquiryStandardData->ProductRevisionLevel)];
2351       char SerialNumber[1+sizeof(InquiryUnitSerialNumber->ProductSerialNumber)];
2352       if (PhysicalDeviceInfo == NULL) break;
2353       DAC960_SanitizeInquiryData(InquiryStandardData, InquiryUnitSerialNumber,
2354                                  Vendor, Model, Revision, SerialNumber);
2355       DAC960_Info("    %d:%d%s Vendor: %s  Model: %s  Revision: %s\n",
2356                   Controller,
2357                   PhysicalDeviceInfo->Channel,
2358                   PhysicalDeviceInfo->TargetID,
2359                   (PhysicalDeviceInfo->TargetID < 10 ? " " : ""),
2360                   Vendor, Model, Revision);
2361       if (PhysicalDeviceInfo->NegotiatedSynchronousMegaTransfers == 0)
2362         DAC960_Info("         %sAsynchronous\n", Controller,
2363                     (PhysicalDeviceInfo->NegotiatedDataWidthBits == 16
2364                      ? "Wide " :""));
2365       else
2366         DAC960_Info("         %sSynchronous at %d MB/sec\n", Controller,
2367                     (PhysicalDeviceInfo->NegotiatedDataWidthBits == 16
2368                      ? "Wide " :""),
2369                     (PhysicalDeviceInfo->NegotiatedSynchronousMegaTransfers
2370                      * PhysicalDeviceInfo->NegotiatedDataWidthBits/8));
2371       if (InquiryUnitSerialNumber->PeripheralDeviceType != 0x1F)
2372         DAC960_Info("         Serial Number: %s\n", Controller, SerialNumber);
2373       if (PhysicalDeviceInfo->PhysicalDeviceState ==
2374           DAC960_V2_Device_Unconfigured)
2375         continue;
2376       DAC960_Info("         Disk Status: %s, %u blocks\n", Controller,
2377                   (PhysicalDeviceInfo->PhysicalDeviceState
2378                    == DAC960_V2_Device_Online
2379                    ? "Online"
2380                    : PhysicalDeviceInfo->PhysicalDeviceState
2381                      == DAC960_V2_Device_Rebuild
2382                      ? "Rebuild"
2383                      : PhysicalDeviceInfo->PhysicalDeviceState
2384                        == DAC960_V2_Device_Missing
2385                        ? "Missing"
2386                        : PhysicalDeviceInfo->PhysicalDeviceState
2387                          == DAC960_V2_Device_Critical
2388                          ? "Critical"
2389                          : PhysicalDeviceInfo->PhysicalDeviceState
2390                            == DAC960_V2_Device_Dead
2391                            ? "Dead"
2392                            : PhysicalDeviceInfo->PhysicalDeviceState
2393                              == DAC960_V2_Device_SuspectedDead
2394                              ? "Suspected-Dead"
2395                              : PhysicalDeviceInfo->PhysicalDeviceState
2396                                == DAC960_V2_Device_CommandedOffline
2397                                ? "Commanded-Offline"
2398                                : PhysicalDeviceInfo->PhysicalDeviceState
2399                                  == DAC960_V2_Device_Standby
2400                                  ? "Standby" : "Unknown"),
2401                   PhysicalDeviceInfo->ConfigurableDeviceSize);
2402       if (PhysicalDeviceInfo->ParityErrors == 0 &&
2403           PhysicalDeviceInfo->SoftErrors == 0 &&
2404           PhysicalDeviceInfo->HardErrors == 0 &&
2405           PhysicalDeviceInfo->MiscellaneousErrors == 0 &&
2406           PhysicalDeviceInfo->CommandTimeouts == 0 &&
2407           PhysicalDeviceInfo->Retries == 0 &&
2408           PhysicalDeviceInfo->Aborts == 0 &&
2409           PhysicalDeviceInfo->PredictedFailuresDetected == 0)
2410         continue;
2411       DAC960_Info("         Errors - Parity: %d, Soft: %d, "
2412                   "Hard: %d, Misc: %d\n", Controller,
2413                   PhysicalDeviceInfo->ParityErrors,
2414                   PhysicalDeviceInfo->SoftErrors,
2415                   PhysicalDeviceInfo->HardErrors,
2416                   PhysicalDeviceInfo->MiscellaneousErrors);
2417       DAC960_Info("                  Timeouts: %d, Retries: %d, "
2418                   "Aborts: %d, Predicted: %d\n", Controller,
2419                   PhysicalDeviceInfo->CommandTimeouts,
2420                   PhysicalDeviceInfo->Retries,
2421                   PhysicalDeviceInfo->Aborts,
2422                   PhysicalDeviceInfo->PredictedFailuresDetected);
2423     }
2424   DAC960_Info("  Logical Drives:\n", Controller);
2425   for (LogicalDriveNumber = 0;
2426        LogicalDriveNumber < DAC960_MaxLogicalDrives;
2427        LogicalDriveNumber++)
2428     {
2429       DAC960_V2_LogicalDeviceInfo_T *LogicalDeviceInfo =
2430         Controller->V2.LogicalDeviceInformation[LogicalDriveNumber];
2431       unsigned char *ReadCacheStatus[] = { "Read Cache Disabled",
2432                                            "Read Cache Enabled",
2433                                            "Read Ahead Enabled",
2434                                            "Intelligent Read Ahead Enabled",
2435                                            "-", "-", "-", "-" };
2436       unsigned char *WriteCacheStatus[] = { "Write Cache Disabled",
2437                                             "Logical Device Read Only",
2438                                             "Write Cache Enabled",
2439                                             "Intelligent Write Cache Enabled",
2440                                             "-", "-", "-", "-" };
2441       unsigned char *GeometryTranslation;
2442       if (LogicalDeviceInfo == NULL) continue;
2443       switch (LogicalDeviceInfo->DriveGeometry)
2444         {
2445         case DAC960_V2_Geometry_128_32:
2446           GeometryTranslation = "128/32";
2447           break;
2448         case DAC960_V2_Geometry_255_63:
2449           GeometryTranslation = "255/63";
2450           break;
2451         default:
2452           GeometryTranslation = "Invalid";
2453           DAC960_Error("Illegal Logical Device Geometry %d\n",
2454                        Controller, LogicalDeviceInfo->DriveGeometry);
2455           break;
2456         }
2457       DAC960_Info("    /dev/rd/c%dd%d: RAID-%d, %s, %u blocks\n",
2458                   Controller, Controller->ControllerNumber, LogicalDriveNumber,
2459                   LogicalDeviceInfo->RAIDLevel,
2460                   (LogicalDeviceInfo->LogicalDeviceState
2461                    == DAC960_V2_LogicalDevice_Online
2462                    ? "Online"
2463                    : LogicalDeviceInfo->LogicalDeviceState
2464                      == DAC960_V2_LogicalDevice_Critical
2465                      ? "Critical" : "Offline"),
2466                   LogicalDeviceInfo->ConfigurableDeviceSize);
2467       DAC960_Info("                  Logical Device %s, BIOS Geometry: %s\n",
2468                   Controller,
2469                   (LogicalDeviceInfo->LogicalDeviceControl
2470                                      .LogicalDeviceInitialized
2471                    ? "Initialized" : "Uninitialized"),
2472                   GeometryTranslation);
2473       if (LogicalDeviceInfo->StripeSize == 0)
2474         {
2475           if (LogicalDeviceInfo->CacheLineSize == 0)
2476             DAC960_Info("                  Stripe Size: N/A, "
2477                         "Segment Size: N/A\n", Controller);
2478           else
2479             DAC960_Info("                  Stripe Size: N/A, "
2480                         "Segment Size: %dKB\n", Controller,
2481                         1 << (LogicalDeviceInfo->CacheLineSize - 2));
2482         }
2483       else
2484         {
2485           if (LogicalDeviceInfo->CacheLineSize == 0)
2486             DAC960_Info("                  Stripe Size: %dKB, "
2487                         "Segment Size: N/A\n", Controller,
2488                         1 << (LogicalDeviceInfo->StripeSize - 2));
2489           else
2490             DAC960_Info("                  Stripe Size: %dKB, "
2491                         "Segment Size: %dKB\n", Controller,
2492                         1 << (LogicalDeviceInfo->StripeSize - 2),
2493                         1 << (LogicalDeviceInfo->CacheLineSize - 2));
2494         }
2495       DAC960_Info("                  %s, %s\n", Controller,
2496                   ReadCacheStatus[
2497                     LogicalDeviceInfo->LogicalDeviceControl.ReadCache],
2498                   WriteCacheStatus[
2499                     LogicalDeviceInfo->LogicalDeviceControl.WriteCache]);
2500       if (LogicalDeviceInfo->SoftErrors > 0 ||
2501           LogicalDeviceInfo->CommandsFailed > 0 ||
2502           LogicalDeviceInfo->DeferredWriteErrors)
2503         DAC960_Info("                  Errors - Soft: %d, Failed: %d, "
2504                     "Deferred Write: %d\n", Controller,
2505                     LogicalDeviceInfo->SoftErrors,
2506                     LogicalDeviceInfo->CommandsFailed,
2507                     LogicalDeviceInfo->DeferredWriteErrors);
2508
2509     }
2510   return true;
2511 }
2512
2513 /*
2514   DAC960_RegisterBlockDevice registers the Block Device structures
2515   associated with Controller.
2516 */
2517
2518 static bool DAC960_RegisterBlockDevice(DAC960_Controller_T *Controller)
2519 {
2520   int MajorNumber = DAC960_MAJOR + Controller->ControllerNumber;
2521   int n;
2522
2523   /*
2524     Register the Block Device Major Number for this DAC960 Controller.
2525   */
2526   if (register_blkdev(MajorNumber, "dac960") < 0)
2527       return false;
2528
2529   for (n = 0; n < DAC960_MaxLogicalDrives; n++) {
2530         struct gendisk *disk = Controller->disks[n];
2531         struct request_queue *RequestQueue;
2532
2533         /* for now, let all request queues share controller's lock */
2534         RequestQueue = blk_init_queue(DAC960_RequestFunction,&Controller->queue_lock);
2535         if (!RequestQueue) {
2536                 printk("DAC960: failure to allocate request queue\n");
2537                 continue;
2538         }
2539         Controller->RequestQueue[n] = RequestQueue;
2540         blk_queue_bounce_limit(RequestQueue, Controller->BounceBufferLimit);
2541         RequestQueue->queuedata = Controller;
2542         blk_queue_max_segments(RequestQueue, Controller->DriverScatterGatherLimit);
2543         blk_queue_max_hw_sectors(RequestQueue, Controller->MaxBlocksPerCommand);
2544         disk->queue = RequestQueue;
2545         sprintf(disk->disk_name, "rd/c%dd%d", Controller->ControllerNumber, n);
2546         disk->major = MajorNumber;
2547         disk->first_minor = n << DAC960_MaxPartitionsBits;
2548         disk->fops = &DAC960_BlockDeviceOperations;
2549    }
2550   /*
2551     Indicate the Block Device Registration completed successfully,
2552   */
2553   return true;
2554 }
2555
2556
2557 /*
2558   DAC960_UnregisterBlockDevice unregisters the Block Device structures
2559   associated with Controller.
2560 */
2561
2562 static void DAC960_UnregisterBlockDevice(DAC960_Controller_T *Controller)
2563 {
2564   int MajorNumber = DAC960_MAJOR + Controller->ControllerNumber;
2565   int disk;
2566
2567   /* does order matter when deleting gendisk and cleanup in request queue? */
2568   for (disk = 0; disk < DAC960_MaxLogicalDrives; disk++) {
2569         del_gendisk(Controller->disks[disk]);
2570         blk_cleanup_queue(Controller->RequestQueue[disk]);
2571         Controller->RequestQueue[disk] = NULL;
2572   }
2573
2574   /*
2575     Unregister the Block Device Major Number for this DAC960 Controller.
2576   */
2577   unregister_blkdev(MajorNumber, "dac960");
2578 }
2579
2580 /*
2581   DAC960_ComputeGenericDiskInfo computes the values for the Generic Disk
2582   Information Partition Sector Counts and Block Sizes.
2583 */
2584
2585 static void DAC960_ComputeGenericDiskInfo(DAC960_Controller_T *Controller)
2586 {
2587         int disk;
2588         for (disk = 0; disk < DAC960_MaxLogicalDrives; disk++)
2589                 set_capacity(Controller->disks[disk], disk_size(Controller, disk));
2590 }
2591
2592 /*
2593   DAC960_ReportErrorStatus reports Controller BIOS Messages passed through
2594   the Error Status Register when the driver performs the BIOS handshaking.
2595   It returns true for fatal errors and false otherwise.
2596 */
2597
2598 static bool DAC960_ReportErrorStatus(DAC960_Controller_T *Controller,
2599                                         unsigned char ErrorStatus,
2600                                         unsigned char Parameter0,
2601                                         unsigned char Parameter1)
2602 {
2603   switch (ErrorStatus)
2604     {
2605     case 0x00:
2606       DAC960_Notice("Physical Device %d:%d Not Responding\n",
2607                     Controller, Parameter1, Parameter0);
2608       break;
2609     case 0x08:
2610       if (Controller->DriveSpinUpMessageDisplayed) break;
2611       DAC960_Notice("Spinning Up Drives\n", Controller);
2612       Controller->DriveSpinUpMessageDisplayed = true;
2613       break;
2614     case 0x30:
2615       DAC960_Notice("Configuration Checksum Error\n", Controller);
2616       break;
2617     case 0x60:
2618       DAC960_Notice("Mirror Race Recovery Failed\n", Controller);
2619       break;
2620     case 0x70:
2621       DAC960_Notice("Mirror Race Recovery In Progress\n", Controller);
2622       break;
2623     case 0x90:
2624       DAC960_Notice("Physical Device %d:%d COD Mismatch\n",
2625                     Controller, Parameter1, Parameter0);
2626       break;
2627     case 0xA0:
2628       DAC960_Notice("Logical Drive Installation Aborted\n", Controller);
2629       break;
2630     case 0xB0:
2631       DAC960_Notice("Mirror Race On A Critical Logical Drive\n", Controller);
2632       break;
2633     case 0xD0:
2634       DAC960_Notice("New Controller Configuration Found\n", Controller);
2635       break;
2636     case 0xF0:
2637       DAC960_Error("Fatal Memory Parity Error for Controller at\n", Controller);
2638       return true;
2639     default:
2640       DAC960_Error("Unknown Initialization Error %02X for Controller at\n",
2641                    Controller, ErrorStatus);
2642       return true;
2643     }
2644   return false;
2645 }
2646
2647
2648 /*
2649  * DAC960_DetectCleanup releases the resources that were allocated
2650  * during DAC960_DetectController().  DAC960_DetectController can
2651  * has several internal failure points, so not ALL resources may
2652  * have been allocated.  It's important to free only
2653  * resources that HAVE been allocated.  The code below always
2654  * tests that the resource has been allocated before attempting to
2655  * free it.
2656  */
2657 static void DAC960_DetectCleanup(DAC960_Controller_T *Controller)
2658 {
2659   int i;
2660
2661   /* Free the memory mailbox, status, and related structures */
2662   free_dma_loaf(Controller->PCIDevice, &Controller->DmaPages);
2663   if (Controller->MemoryMappedAddress) {
2664         switch(Controller->HardwareType)
2665         {
2666                 case DAC960_GEM_Controller:
2667                         DAC960_GEM_DisableInterrupts(Controller->BaseAddress);
2668                         break;
2669                 case DAC960_BA_Controller:
2670                         DAC960_BA_DisableInterrupts(Controller->BaseAddress);
2671                         break;
2672                 case DAC960_LP_Controller:
2673                         DAC960_LP_DisableInterrupts(Controller->BaseAddress);
2674                         break;
2675                 case DAC960_LA_Controller:
2676                         DAC960_LA_DisableInterrupts(Controller->BaseAddress);
2677                         break;
2678                 case DAC960_PG_Controller:
2679                         DAC960_PG_DisableInterrupts(Controller->BaseAddress);
2680                         break;
2681                 case DAC960_PD_Controller:
2682                         DAC960_PD_DisableInterrupts(Controller->BaseAddress);
2683                         break;
2684                 case DAC960_P_Controller:
2685                         DAC960_PD_DisableInterrupts(Controller->BaseAddress);
2686                         break;
2687         }
2688         iounmap(Controller->MemoryMappedAddress);
2689   }
2690   if (Controller->IRQ_Channel)
2691         free_irq(Controller->IRQ_Channel, Controller);
2692   if (Controller->IO_Address)
2693         release_region(Controller->IO_Address, 0x80);
2694   pci_disable_device(Controller->PCIDevice);
2695   for (i = 0; (i < DAC960_MaxLogicalDrives) && Controller->disks[i]; i++)
2696        put_disk(Controller->disks[i]);
2697   DAC960_Controllers[Controller->ControllerNumber] = NULL;
2698   kfree(Controller);
2699 }
2700
2701
2702 /*
2703   DAC960_DetectController detects Mylex DAC960/AcceleRAID/eXtremeRAID
2704   PCI RAID Controllers by interrogating the PCI Configuration Space for
2705   Controller Type.
2706 */
2707
2708 static DAC960_Controller_T *
2709 DAC960_DetectController(struct pci_dev *PCI_Device,
2710                         const struct pci_device_id *entry)
2711 {
2712   struct DAC960_privdata *privdata =
2713                 (struct DAC960_privdata *)entry->driver_data;
2714   irq_handler_t InterruptHandler = privdata->InterruptHandler;
2715   unsigned int MemoryWindowSize = privdata->MemoryWindowSize;
2716   DAC960_Controller_T *Controller = NULL;
2717   unsigned char DeviceFunction = PCI_Device->devfn;
2718   unsigned char ErrorStatus, Parameter0, Parameter1;
2719   unsigned int IRQ_Channel;
2720   void __iomem *BaseAddress;
2721   int i;
2722
2723   Controller = kzalloc(sizeof(DAC960_Controller_T), GFP_ATOMIC);
2724   if (Controller == NULL) {
2725         DAC960_Error("Unable to allocate Controller structure for "
2726                        "Controller at\n", NULL);
2727         return NULL;
2728   }
2729   Controller->ControllerNumber = DAC960_ControllerCount;
2730   DAC960_Controllers[DAC960_ControllerCount++] = Controller;
2731   Controller->Bus = PCI_Device->bus->number;
2732   Controller->FirmwareType = privdata->FirmwareType;
2733   Controller->HardwareType = privdata->HardwareType;
2734   Controller->Device = DeviceFunction >> 3;
2735   Controller->Function = DeviceFunction & 0x7;
2736   Controller->PCIDevice = PCI_Device;
2737   strcpy(Controller->FullModelName, "DAC960");
2738
2739   if (pci_enable_device(PCI_Device))
2740         goto Failure;
2741
2742   switch (Controller->HardwareType)
2743   {
2744         case DAC960_GEM_Controller:
2745           Controller->PCI_Address = pci_resource_start(PCI_Device, 0);
2746           break;
2747         case DAC960_BA_Controller:
2748           Controller->PCI_Address = pci_resource_start(PCI_Device, 0);
2749           break;
2750         case DAC960_LP_Controller:
2751           Controller->PCI_Address = pci_resource_start(PCI_Device, 0);
2752           break;
2753         case DAC960_LA_Controller:
2754           Controller->PCI_Address = pci_resource_start(PCI_Device, 0);
2755           break;
2756         case DAC960_PG_Controller:
2757           Controller->PCI_Address = pci_resource_start(PCI_Device, 0);
2758           break;
2759         case DAC960_PD_Controller:
2760           Controller->IO_Address = pci_resource_start(PCI_Device, 0);
2761           Controller->PCI_Address = pci_resource_start(PCI_Device, 1);
2762           break;
2763         case DAC960_P_Controller:
2764           Controller->IO_Address = pci_resource_start(PCI_Device, 0);
2765           Controller->PCI_Address = pci_resource_start(PCI_Device, 1);
2766           break;
2767   }
2768
2769   pci_set_drvdata(PCI_Device, (void *)((long)Controller->ControllerNumber));
2770   for (i = 0; i < DAC960_MaxLogicalDrives; i++) {
2771         Controller->disks[i] = alloc_disk(1<<DAC960_MaxPartitionsBits);
2772         if (!Controller->disks[i])
2773                 goto Failure;
2774         Controller->disks[i]->private_data = (void *)((long)i);
2775   }
2776   init_waitqueue_head(&Controller->CommandWaitQueue);
2777   init_waitqueue_head(&Controller->HealthStatusWaitQueue);
2778   spin_lock_init(&Controller->queue_lock);
2779   DAC960_AnnounceDriver(Controller);
2780   /*
2781     Map the Controller Register Window.
2782   */
2783  if (MemoryWindowSize < PAGE_SIZE)
2784         MemoryWindowSize = PAGE_SIZE;
2785   Controller->MemoryMappedAddress =
2786         ioremap_nocache(Controller->PCI_Address & PAGE_MASK, MemoryWindowSize);
2787   Controller->BaseAddress =
2788         Controller->MemoryMappedAddress + (Controller->PCI_Address & ~PAGE_MASK);
2789   if (Controller->MemoryMappedAddress == NULL)
2790   {
2791           DAC960_Error("Unable to map Controller Register Window for "
2792                        "Controller at\n", Controller);
2793           goto Failure;
2794   }
2795   BaseAddress = Controller->BaseAddress;
2796   switch (Controller->HardwareType)
2797   {
2798         case DAC960_GEM_Controller:
2799           DAC960_GEM_DisableInterrupts(BaseAddress);
2800           DAC960_GEM_AcknowledgeHardwareMailboxStatus(BaseAddress);
2801           udelay(1000);
2802           while (DAC960_GEM_InitializationInProgressP(BaseAddress))
2803             {
2804               if (DAC960_GEM_ReadErrorStatus(BaseAddress, &ErrorStatus,
2805                                             &Parameter0, &Parameter1) &&
2806                   DAC960_ReportErrorStatus(Controller, ErrorStatus,
2807                                            Parameter0, Parameter1))
2808                 goto Failure;
2809               udelay(10);
2810             }
2811           if (!DAC960_V2_EnableMemoryMailboxInterface(Controller))
2812             {
2813               DAC960_Error("Unable to Enable Memory Mailbox Interface "
2814                            "for Controller at\n", Controller);
2815               goto Failure;
2816             }
2817           DAC960_GEM_EnableInterrupts(BaseAddress);
2818           Controller->QueueCommand = DAC960_GEM_QueueCommand;
2819           Controller->ReadControllerConfiguration =
2820             DAC960_V2_ReadControllerConfiguration;
2821           Controller->ReadDeviceConfiguration =
2822             DAC960_V2_ReadDeviceConfiguration;
2823           Controller->ReportDeviceConfiguration =
2824             DAC960_V2_ReportDeviceConfiguration;
2825           Controller->QueueReadWriteCommand =
2826             DAC960_V2_QueueReadWriteCommand;
2827           break;
2828         case DAC960_BA_Controller:
2829           DAC960_BA_DisableInterrupts(BaseAddress);
2830           DAC960_BA_AcknowledgeHardwareMailboxStatus(BaseAddress);
2831           udelay(1000);
2832           while (DAC960_BA_InitializationInProgressP(BaseAddress))
2833             {
2834               if (DAC960_BA_ReadErrorStatus(BaseAddress, &ErrorStatus,
2835                                             &Parameter0, &Parameter1) &&
2836                   DAC960_ReportErrorStatus(Controller, ErrorStatus,
2837                                            Parameter0, Parameter1))
2838                 goto Failure;
2839               udelay(10);
2840             }
2841           if (!DAC960_V2_EnableMemoryMailboxInterface(Controller))
2842             {
2843               DAC960_Error("Unable to Enable Memory Mailbox Interface "
2844                            "for Controller at\n", Controller);
2845               goto Failure;
2846             }
2847           DAC960_BA_EnableInterrupts(BaseAddress);
2848           Controller->QueueCommand = DAC960_BA_QueueCommand;
2849           Controller->ReadControllerConfiguration =
2850             DAC960_V2_ReadControllerConfiguration;
2851           Controller->ReadDeviceConfiguration =
2852             DAC960_V2_ReadDeviceConfiguration;
2853           Controller->ReportDeviceConfiguration =
2854             DAC960_V2_ReportDeviceConfiguration;
2855           Controller->QueueReadWriteCommand =
2856             DAC960_V2_QueueReadWriteCommand;
2857           break;
2858         case DAC960_LP_Controller:
2859           DAC960_LP_DisableInterrupts(BaseAddress);
2860           DAC960_LP_AcknowledgeHardwareMailboxStatus(BaseAddress);
2861           udelay(1000);
2862           while (DAC960_LP_InitializationInProgressP(BaseAddress))
2863             {
2864               if (DAC960_LP_ReadErrorStatus(BaseAddress, &ErrorStatus,
2865                                             &Parameter0, &Parameter1) &&
2866                   DAC960_ReportErrorStatus(Controller, ErrorStatus,
2867                                            Parameter0, Parameter1))
2868                 goto Failure;
2869               udelay(10);
2870             }
2871           if (!DAC960_V2_EnableMemoryMailboxInterface(Controller))
2872             {
2873               DAC960_Error("Unable to Enable Memory Mailbox Interface "
2874                            "for Controller at\n", Controller);
2875               goto Failure;
2876             }
2877           DAC960_LP_EnableInterrupts(BaseAddress);
2878           Controller->QueueCommand = DAC960_LP_QueueCommand;
2879           Controller->ReadControllerConfiguration =
2880             DAC960_V2_ReadControllerConfiguration;
2881           Controller->ReadDeviceConfiguration =
2882             DAC960_V2_ReadDeviceConfiguration;
2883           Controller->ReportDeviceConfiguration =
2884             DAC960_V2_ReportDeviceConfiguration;
2885           Controller->QueueReadWriteCommand =
2886             DAC960_V2_QueueReadWriteCommand;
2887           break;
2888         case DAC960_LA_Controller:
2889           DAC960_LA_DisableInterrupts(BaseAddress);
2890           DAC960_LA_AcknowledgeHardwareMailboxStatus(BaseAddress);
2891           udelay(1000);
2892           while (DAC960_LA_InitializationInProgressP(BaseAddress))
2893             {
2894               if (DAC960_LA_ReadErrorStatus(BaseAddress, &ErrorStatus,
2895                                             &Parameter0, &Parameter1) &&
2896                   DAC960_ReportErrorStatus(Controller, ErrorStatus,
2897                                            Parameter0, Parameter1))
2898                 goto Failure;
2899               udelay(10);
2900             }
2901           if (!DAC960_V1_EnableMemoryMailboxInterface(Controller))
2902             {
2903               DAC960_Error("Unable to Enable Memory Mailbox Interface "
2904                            "for Controller at\n", Controller);
2905               goto Failure;
2906             }
2907           DAC960_LA_EnableInterrupts(BaseAddress);
2908           if (Controller->V1.DualModeMemoryMailboxInterface)
2909             Controller->QueueCommand = DAC960_LA_QueueCommandDualMode;
2910           else Controller->QueueCommand = DAC960_LA_QueueCommandSingleMode;
2911           Controller->ReadControllerConfiguration =
2912             DAC960_V1_ReadControllerConfiguration;
2913           Controller->ReadDeviceConfiguration =
2914             DAC960_V1_ReadDeviceConfiguration;
2915           Controller->ReportDeviceConfiguration =
2916             DAC960_V1_ReportDeviceConfiguration;
2917           Controller->QueueReadWriteCommand =
2918             DAC960_V1_QueueReadWriteCommand;
2919           break;
2920         case DAC960_PG_Controller:
2921           DAC960_PG_DisableInterrupts(BaseAddress);
2922           DAC960_PG_AcknowledgeHardwareMailboxStatus(BaseAddress);
2923           udelay(1000);
2924           while (DAC960_PG_InitializationInProgressP(BaseAddress))
2925             {
2926               if (DAC960_PG_ReadErrorStatus(BaseAddress, &ErrorStatus,
2927                                             &Parameter0, &Parameter1) &&
2928                   DAC960_ReportErrorStatus(Controller, ErrorStatus,
2929                                            Parameter0, Parameter1))
2930                 goto Failure;
2931               udelay(10);
2932             }
2933           if (!DAC960_V1_EnableMemoryMailboxInterface(Controller))
2934             {
2935               DAC960_Error("Unable to Enable Memory Mailbox Interface "
2936                            "for Controller at\n", Controller);
2937               goto Failure;
2938             }
2939           DAC960_PG_EnableInterrupts(BaseAddress);
2940           if (Controller->V1.DualModeMemoryMailboxInterface)
2941             Controller->QueueCommand = DAC960_PG_QueueCommandDualMode;
2942           else Controller->QueueCommand = DAC960_PG_QueueCommandSingleMode;
2943           Controller->ReadControllerConfiguration =
2944             DAC960_V1_ReadControllerConfiguration;
2945           Controller->ReadDeviceConfiguration =
2946             DAC960_V1_ReadDeviceConfiguration;
2947           Controller->ReportDeviceConfiguration =
2948             DAC960_V1_ReportDeviceConfiguration;
2949           Controller->QueueReadWriteCommand =
2950             DAC960_V1_QueueReadWriteCommand;
2951           break;
2952         case DAC960_PD_Controller:
2953           if (!request_region(Controller->IO_Address, 0x80,
2954                               Controller->FullModelName)) {
2955                 DAC960_Error("IO port 0x%d busy for Controller at\n",
2956                              Controller, Controller->IO_Address);
2957                 goto Failure;
2958           }
2959           DAC960_PD_DisableInterrupts(BaseAddress);
2960           DAC960_PD_AcknowledgeStatus(BaseAddress);
2961           udelay(1000);
2962           while (DAC960_PD_InitializationInProgressP(BaseAddress))
2963             {
2964               if (DAC960_PD_ReadErrorStatus(BaseAddress, &ErrorStatus,
2965                                             &Parameter0, &Parameter1) &&
2966                   DAC960_ReportErrorStatus(Controller, ErrorStatus,
2967                                            Parameter0, Parameter1))
2968                 goto Failure;
2969               udelay(10);
2970             }
2971           if (!DAC960_V1_EnableMemoryMailboxInterface(Controller))
2972             {
2973               DAC960_Error("Unable to allocate DMA mapped memory "
2974                            "for Controller at\n", Controller);
2975               goto Failure;
2976             }
2977           DAC960_PD_EnableInterrupts(BaseAddress);
2978           Controller->QueueCommand = DAC960_PD_QueueCommand;
2979           Controller->ReadControllerConfiguration =
2980             DAC960_V1_ReadControllerConfiguration;
2981           Controller->ReadDeviceConfiguration =
2982             DAC960_V1_ReadDeviceConfiguration;
2983           Controller->ReportDeviceConfiguration =
2984             DAC960_V1_ReportDeviceConfiguration;
2985           Controller->QueueReadWriteCommand =
2986             DAC960_V1_QueueReadWriteCommand;
2987           break;
2988         case DAC960_P_Controller:
2989           if (!request_region(Controller->IO_Address, 0x80,
2990                               Controller->FullModelName)){
2991                 DAC960_Error("IO port 0x%d busy for Controller at\n",
2992                              Controller, Controller->IO_Address);
2993                 goto Failure;
2994           }
2995           DAC960_PD_DisableInterrupts(BaseAddress);
2996           DAC960_PD_AcknowledgeStatus(BaseAddress);
2997           udelay(1000);
2998           while (DAC960_PD_InitializationInProgressP(BaseAddress))
2999             {
3000               if (DAC960_PD_ReadErrorStatus(BaseAddress, &ErrorStatus,
3001                                             &Parameter0, &Parameter1) &&
3002                   DAC960_ReportErrorStatus(Controller, ErrorStatus,
3003                                            Parameter0, Parameter1))
3004                 goto Failure;
3005               udelay(10);
3006             }
3007           if (!DAC960_V1_EnableMemoryMailboxInterface(Controller))
3008             {
3009               DAC960_Error("Unable to allocate DMA mapped memory"
3010                            "for Controller at\n", Controller);
3011               goto Failure;
3012             }
3013           DAC960_PD_EnableInterrupts(BaseAddress);
3014           Controller->QueueCommand = DAC960_P_QueueCommand;
3015           Controller->ReadControllerConfiguration =
3016             DAC960_V1_ReadControllerConfiguration;
3017           Controller->ReadDeviceConfiguration =
3018             DAC960_V1_ReadDeviceConfiguration;
3019           Controller->ReportDeviceConfiguration =
3020             DAC960_V1_ReportDeviceConfiguration;
3021           Controller->QueueReadWriteCommand =
3022             DAC960_V1_QueueReadWriteCommand;
3023           break;
3024   }
3025   /*
3026      Acquire shared access to the IRQ Channel.
3027   */
3028   IRQ_Channel = PCI_Device->irq;
3029   if (request_irq(IRQ_Channel, InterruptHandler, IRQF_SHARED,
3030                       Controller->FullModelName, Controller) < 0)
3031   {
3032         DAC960_Error("Unable to acquire IRQ Channel %d for Controller at\n",
3033                        Controller, Controller->IRQ_Channel);
3034         goto Failure;
3035   }
3036   Controller->IRQ_Channel = IRQ_Channel;
3037   Controller->InitialCommand.CommandIdentifier = 1;
3038   Controller->InitialCommand.Controller = Controller;
3039   Controller->Commands[0] = &Controller->InitialCommand;
3040   Controller->FreeCommands = &Controller->InitialCommand;
3041   return Controller;
3042
3043 Failure:
3044   if (Controller->IO_Address == 0)
3045         DAC960_Error("PCI Bus %d Device %d Function %d I/O Address N/A "
3046                      "PCI Address 0x%X\n", Controller,
3047                      Controller->Bus, Controller->Device,
3048                      Controller->Function, Controller->PCI_Address);
3049   else
3050         DAC960_Error("PCI Bus %d Device %d Function %d I/O Address "
3051                         "0x%X PCI Address 0x%X\n", Controller,
3052                         Controller->Bus, Controller->Device,
3053                         Controller->Function, Controller->IO_Address,
3054                         Controller->PCI_Address);
3055   DAC960_DetectCleanup(Controller);
3056   DAC960_ControllerCount--;
3057   return NULL;
3058 }
3059
3060 /*
3061   DAC960_InitializeController initializes Controller.
3062 */
3063
3064 static bool
3065 DAC960_InitializeController(DAC960_Controller_T *Controller)
3066 {
3067   if (DAC960_ReadControllerConfiguration(Controller) &&
3068       DAC960_ReportControllerConfiguration(Controller) &&
3069       DAC960_CreateAuxiliaryStructures(Controller) &&
3070       DAC960_ReadDeviceConfiguration(Controller) &&
3071       DAC960_ReportDeviceConfiguration(Controller) &&
3072       DAC960_RegisterBlockDevice(Controller))
3073     {
3074       /*
3075         Initialize the Monitoring Timer.
3076       */
3077       init_timer(&Controller->MonitoringTimer);
3078       Controller->MonitoringTimer.expires =
3079         jiffies + DAC960_MonitoringTimerInterval;
3080       Controller->MonitoringTimer.data = (unsigned long) Controller;
3081       Controller->MonitoringTimer.function = DAC960_MonitoringTimerFunction;
3082       add_timer(&Controller->MonitoringTimer);
3083       Controller->ControllerInitialized = true;
3084       return true;
3085     }
3086   return false;
3087 }
3088
3089
3090 /*
3091   DAC960_FinalizeController finalizes Controller.
3092 */
3093
3094 static void DAC960_FinalizeController(DAC960_Controller_T *Controller)
3095 {
3096   if (Controller->ControllerInitialized)
3097     {
3098       unsigned long flags;
3099
3100       /*
3101        * Acquiring and releasing lock here eliminates
3102        * a very low probability race.
3103        *
3104        * The code below allocates controller command structures
3105        * from the free list without holding the controller lock.
3106        * This is safe assuming there is no other activity on
3107        * the controller at the time.
3108        *
3109        * But, there might be a monitoring command still
3110        * in progress.  Setting the Shutdown flag while holding
3111        * the lock ensures that there is no monitoring command
3112        * in the interrupt handler currently, and any monitoring
3113        * commands that complete from this time on will NOT return
3114        * their command structure to the free list.
3115        */
3116
3117       spin_lock_irqsave(&Controller->queue_lock, flags);
3118       Controller->ShutdownMonitoringTimer = 1;
3119       spin_unlock_irqrestore(&Controller->queue_lock, flags);
3120
3121       del_timer_sync(&Controller->MonitoringTimer);
3122       if (Controller->FirmwareType == DAC960_V1_Controller)
3123         {
3124           DAC960_Notice("Flushing Cache...", Controller);
3125           DAC960_V1_ExecuteType3(Controller, DAC960_V1_Flush, 0);
3126           DAC960_Notice("done\n", Controller);
3127
3128           if (Controller->HardwareType == DAC960_PD_Controller)
3129               release_region(Controller->IO_Address, 0x80);
3130         }
3131       else
3132         {
3133           DAC960_Notice("Flushing Cache...", Controller);
3134           DAC960_V2_DeviceOperation(Controller, DAC960_V2_PauseDevice,
3135                                     DAC960_V2_RAID_Controller);
3136           DAC960_Notice("done\n", Controller);
3137         }
3138     }
3139   DAC960_UnregisterBlockDevice(Controller);
3140   DAC960_DestroyAuxiliaryStructures(Controller);
3141   DAC960_DestroyProcEntries(Controller);
3142   DAC960_DetectCleanup(Controller);
3143 }
3144
3145
3146 /*
3147   DAC960_Probe verifies controller's existence and
3148   initializes the DAC960 Driver for that controller.
3149 */
3150
3151 static int
3152 DAC960_Probe(struct pci_dev *dev, const struct pci_device_id *entry)
3153 {
3154   int disk;
3155   DAC960_Controller_T *Controller;
3156
3157   if (DAC960_ControllerCount == DAC960_MaxControllers)
3158   {
3159         DAC960_Error("More than %d DAC960 Controllers detected - "
3160                        "ignoring from Controller at\n",
3161                        NULL, DAC960_MaxControllers);
3162         return -ENODEV;
3163   }
3164
3165   Controller = DAC960_DetectController(dev, entry);
3166   if (!Controller)
3167         return -ENODEV;
3168
3169   if (!DAC960_InitializeController(Controller)) {
3170         DAC960_FinalizeController(Controller);
3171         return -ENODEV;
3172   }
3173
3174   for (disk = 0; disk < DAC960_MaxLogicalDrives; disk++) {
3175         set_capacity(Controller->disks[disk], disk_size(Controller, disk));
3176         add_disk(Controller->disks[disk]);
3177   }
3178   DAC960_CreateProcEntries(Controller);
3179   return 0;
3180 }
3181
3182
3183 /*
3184   DAC960_Finalize finalizes the DAC960 Driver.
3185 */
3186
3187 static void DAC960_Remove(struct pci_dev *PCI_Device)
3188 {
3189   int Controller_Number = (long)pci_get_drvdata(PCI_Device);
3190   DAC960_Controller_T *Controller = DAC960_Controllers[Controller_Number];
3191   if (Controller != NULL)
3192       DAC960_FinalizeController(Controller);
3193 }
3194
3195
3196 /*
3197   DAC960_V1_QueueReadWriteCommand prepares and queues a Read/Write Command for
3198   DAC960 V1 Firmware Controllers.
3199 */
3200
3201 static void DAC960_V1_QueueReadWriteCommand(DAC960_Command_T *Command)
3202 {
3203   DAC960_Controller_T *Controller = Command->Controller;
3204   DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
3205   DAC960_V1_ScatterGatherSegment_T *ScatterGatherList =
3206                                         Command->V1.ScatterGatherList;
3207   struct scatterlist *ScatterList = Command->V1.ScatterList;
3208
3209   DAC960_V1_ClearCommand(Command);
3210
3211   if (Command->SegmentCount == 1)
3212     {
3213       if (Command->DmaDirection == PCI_DMA_FROMDEVICE)
3214         CommandMailbox->Type5.CommandOpcode = DAC960_V1_Read;
3215       else
3216         CommandMailbox->Type5.CommandOpcode = DAC960_V1_Write;
3217
3218       CommandMailbox->Type5.LD.TransferLength = Command->BlockCount;
3219       CommandMailbox->Type5.LD.LogicalDriveNumber = Command->LogicalDriveNumber;
3220       CommandMailbox->Type5.LogicalBlockAddress = Command->BlockNumber;
3221       CommandMailbox->Type5.BusAddress =
3222                         (DAC960_BusAddress32_T)sg_dma_address(ScatterList);
3223     }
3224   else
3225     {
3226       int i;
3227
3228       if (Command->DmaDirection == PCI_DMA_FROMDEVICE)
3229         CommandMailbox->Type5.CommandOpcode = DAC960_V1_ReadWithScatterGather;
3230       else
3231         CommandMailbox->Type5.CommandOpcode = DAC960_V1_WriteWithScatterGather;
3232
3233       CommandMailbox->Type5.LD.TransferLength = Command->BlockCount;
3234       CommandMailbox->Type5.LD.LogicalDriveNumber = Command->LogicalDriveNumber;
3235       CommandMailbox->Type5.LogicalBlockAddress = Command->BlockNumber;
3236       CommandMailbox->Type5.BusAddress = Command->V1.ScatterGatherListDMA;
3237
3238       CommandMailbox->Type5.ScatterGatherCount = Command->SegmentCount;
3239
3240       for (i = 0; i < Command->SegmentCount; i++, ScatterList++, ScatterGatherList++) {
3241                 ScatterGatherList->SegmentDataPointer =
3242                         (DAC960_BusAddress32_T)sg_dma_address(ScatterList);
3243                 ScatterGatherList->SegmentByteCount =
3244                         (DAC960_ByteCount32_T)sg_dma_len(ScatterList);
3245       }
3246     }
3247   DAC960_QueueCommand(Command);
3248 }
3249
3250
3251 /*
3252   DAC960_V2_QueueReadWriteCommand prepares and queues a Read/Write Command for
3253   DAC960 V2 Firmware Controllers.
3254 */
3255
3256 static void DAC960_V2_QueueReadWriteCommand(DAC960_Command_T *Command)
3257 {
3258   DAC960_Controller_T *Controller = Command->Controller;
3259   DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox;
3260   struct scatterlist *ScatterList = Command->V2.ScatterList;
3261
3262   DAC960_V2_ClearCommand(Command);
3263
3264   CommandMailbox->SCSI_10.CommandOpcode = DAC960_V2_SCSI_10;
3265   CommandMailbox->SCSI_10.CommandControlBits.DataTransferControllerToHost =
3266     (Command->DmaDirection == PCI_DMA_FROMDEVICE);
3267   CommandMailbox->SCSI_10.DataTransferSize =
3268     Command->BlockCount << DAC960_BlockSizeBits;
3269   CommandMailbox->SCSI_10.RequestSenseBusAddress = Command->V2.RequestSenseDMA;
3270   CommandMailbox->SCSI_10.PhysicalDevice =
3271     Controller->V2.LogicalDriveToVirtualDevice[Command->LogicalDriveNumber];
3272   CommandMailbox->SCSI_10.RequestSenseSize = sizeof(DAC960_SCSI_RequestSense_T);
3273   CommandMailbox->SCSI_10.CDBLength = 10;
3274   CommandMailbox->SCSI_10.SCSI_CDB[0] =
3275     (Command->DmaDirection == PCI_DMA_FROMDEVICE ? 0x28 : 0x2A);
3276   CommandMailbox->SCSI_10.SCSI_CDB[2] = Command->BlockNumber >> 24;
3277   CommandMailbox->SCSI_10.SCSI_CDB[3] = Command->BlockNumber >> 16;
3278   CommandMailbox->SCSI_10.SCSI_CDB[4] = Command->BlockNumber >> 8;
3279   CommandMailbox->SCSI_10.SCSI_CDB[5] = Command->BlockNumber;
3280   CommandMailbox->SCSI_10.SCSI_CDB[7] = Command->BlockCount >> 8;
3281   CommandMailbox->SCSI_10.SCSI_CDB[8] = Command->BlockCount;
3282
3283   if (Command->SegmentCount == 1)
3284     {
3285       CommandMailbox->SCSI_10.DataTransferMemoryAddress
3286                              .ScatterGatherSegments[0]
3287                              .SegmentDataPointer =
3288         (DAC960_BusAddress64_T)sg_dma_address(ScatterList);
3289       CommandMailbox->SCSI_10.DataTransferMemoryAddress
3290                              .ScatterGatherSegments[0]
3291                              .SegmentByteCount =
3292         CommandMailbox->SCSI_10.DataTransferSize;
3293     }
3294   else
3295     {
3296       DAC960_V2_ScatterGatherSegment_T *ScatterGatherList;
3297       int i;
3298
3299       if (Command->SegmentCount > 2)
3300         {
3301           ScatterGatherList = Command->V2.ScatterGatherList;
3302           CommandMailbox->SCSI_10.CommandControlBits
3303                          .AdditionalScatterGatherListMemory = true;
3304           CommandMailbox->SCSI_10.DataTransferMemoryAddress
3305                 .ExtendedScatterGather.ScatterGatherList0Length = Command->SegmentCount;
3306           CommandMailbox->SCSI_10.DataTransferMemoryAddress
3307                          .ExtendedScatterGather.ScatterGatherList0Address =
3308             Command->V2.ScatterGatherListDMA;
3309         }
3310       else
3311         ScatterGatherList = CommandMailbox->SCSI_10.DataTransferMemoryAddress
3312                                  .ScatterGatherSegments;
3313
3314       for (i = 0; i < Command->SegmentCount; i++, ScatterList++, ScatterGatherList++) {
3315                 ScatterGatherList->SegmentDataPointer =
3316                         (DAC960_BusAddress64_T)sg_dma_address(ScatterList);
3317                 ScatterGatherList->SegmentByteCount =
3318                         (DAC960_ByteCount64_T)sg_dma_len(ScatterList);
3319       }
3320     }
3321   DAC960_QueueCommand(Command);
3322 }
3323
3324
3325 static int DAC960_process_queue(DAC960_Controller_T *Controller, struct request_queue *req_q)
3326 {
3327         struct request *Request;
3328         DAC960_Command_T *Command;
3329
3330    while(1) {
3331         Request = blk_peek_request(req_q);
3332         if (!Request)
3333                 return 1;
3334
3335         Command = DAC960_AllocateCommand(Controller);
3336         if (Command == NULL)
3337                 return 0;
3338
3339         if (rq_data_dir(Request) == READ) {
3340                 Command->DmaDirection = PCI_DMA_FROMDEVICE;
3341                 Command->CommandType = DAC960_ReadCommand;
3342         } else {
3343                 Command->DmaDirection = PCI_DMA_TODEVICE;
3344                 Command->CommandType = DAC960_WriteCommand;
3345         }
3346         Command->Completion = Request->end_io_data;
3347         Command->LogicalDriveNumber = (long)Request->rq_disk->private_data;
3348         Command->BlockNumber = blk_rq_pos(Request);
3349         Command->BlockCount = blk_rq_sectors(Request);
3350         Command->Request = Request;
3351         blk_start_request(Request);
3352         Command->SegmentCount = blk_rq_map_sg(req_q,
3353                   Command->Request, Command->cmd_sglist);
3354         /* pci_map_sg MAY change the value of SegCount */
3355         Command->SegmentCount = pci_map_sg(Controller->PCIDevice, Command->cmd_sglist,
3356                  Command->SegmentCount, Command->DmaDirection);
3357
3358         DAC960_QueueReadWriteCommand(Command);
3359   }
3360 }
3361
3362 /*
3363   DAC960_ProcessRequest attempts to remove one I/O Request from Controller's
3364   I/O Request Queue and queues it to the Controller.  WaitForCommand is true if
3365   this function should wait for a Command to become available if necessary.
3366   This function returns true if an I/O Request was queued and false otherwise.
3367 */
3368 static void DAC960_ProcessRequest(DAC960_Controller_T *controller)
3369 {
3370         int i;
3371
3372         if (!controller->ControllerInitialized)
3373                 return;
3374
3375         /* Do this better later! */
3376         for (i = controller->req_q_index; i < DAC960_MaxLogicalDrives; i++) {
3377                 struct request_queue *req_q = controller->RequestQueue[i];
3378
3379                 if (req_q == NULL)
3380                         continue;
3381
3382                 if (!DAC960_process_queue(controller, req_q)) {
3383                         controller->req_q_index = i;
3384                         return;
3385                 }
3386         }
3387
3388         if (controller->req_q_index == 0)
3389                 return;
3390
3391         for (i = 0; i < controller->req_q_index; i++) {
3392                 struct request_queue *req_q = controller->RequestQueue[i];
3393
3394                 if (req_q == NULL)
3395                         continue;
3396
3397                 if (!DAC960_process_queue(controller, req_q)) {
3398                         controller->req_q_index = i;
3399                         return;
3400                 }
3401         }
3402 }
3403
3404
3405 /*
3406   DAC960_queue_partial_rw extracts one bio from the request already
3407   associated with argument command, and construct a new command block to retry I/O
3408   only on that bio.  Queue that command to the controller.
3409
3410   This function re-uses a previously-allocated Command,
3411         there is no failure mode from trying to allocate a command.
3412 */
3413
3414 static void DAC960_queue_partial_rw(DAC960_Command_T *Command)
3415 {
3416   DAC960_Controller_T *Controller = Command->Controller;
3417   struct request *Request = Command->Request;
3418   struct request_queue *req_q = Controller->RequestQueue[Command->LogicalDriveNumber];
3419
3420   if (Command->DmaDirection == PCI_DMA_FROMDEVICE)
3421     Command->CommandType = DAC960_ReadRetryCommand;
3422   else
3423     Command->CommandType = DAC960_WriteRetryCommand;
3424
3425   /*
3426    * We could be more efficient with these mapping requests
3427    * and map only the portions that we need.  But since this
3428    * code should almost never be called, just go with a
3429    * simple coding.
3430    */
3431   (void)blk_rq_map_sg(req_q, Command->Request, Command->cmd_sglist);
3432
3433   (void)pci_map_sg(Controller->PCIDevice, Command->cmd_sglist, 1, Command->DmaDirection);
3434   /*
3435    * Resubmitting the request sector at a time is really tedious.
3436    * But, this should almost never happen.  So, we're willing to pay
3437    * this price so that in the end, as much of the transfer is completed
3438    * successfully as possible.
3439    */
3440   Command->SegmentCount = 1;
3441   Command->BlockNumber = blk_rq_pos(Request);
3442   Command->BlockCount = 1;
3443   DAC960_QueueReadWriteCommand(Command);
3444   return;
3445 }
3446
3447 /*
3448   DAC960_RequestFunction is the I/O Request Function for DAC960 Controllers.
3449 */
3450
3451 static void DAC960_RequestFunction(struct request_queue *RequestQueue)
3452 {
3453         DAC960_ProcessRequest(RequestQueue->queuedata);
3454 }
3455
3456 /*
3457   DAC960_ProcessCompletedBuffer performs completion processing for an
3458   individual Buffer.
3459 */
3460
3461 static inline bool DAC960_ProcessCompletedRequest(DAC960_Command_T *Command,
3462                                                  bool SuccessfulIO)
3463 {
3464         struct request *Request = Command->Request;
3465         int Error = SuccessfulIO ? 0 : -EIO;
3466
3467         pci_unmap_sg(Command->Controller->PCIDevice, Command->cmd_sglist,
3468                 Command->SegmentCount, Command->DmaDirection);
3469
3470          if (!__blk_end_request(Request, Error, Command->BlockCount << 9)) {
3471                 if (Command->Completion) {
3472                         complete(Command->Completion);
3473                         Command->Completion = NULL;
3474                 }
3475                 return true;
3476         }
3477         return false;
3478 }
3479
3480 /*
3481   DAC960_V1_ReadWriteError prints an appropriate error message for Command
3482   when an error occurs on a Read or Write operation.
3483 */
3484
3485 static void DAC960_V1_ReadWriteError(DAC960_Command_T *Command)
3486 {
3487   DAC960_Controller_T *Controller = Command->Controller;
3488   unsigned char *CommandName = "UNKNOWN";
3489   switch (Command->CommandType)
3490     {
3491     case DAC960_ReadCommand:
3492     case DAC960_ReadRetryCommand:
3493       CommandName = "READ";
3494       break;
3495     case DAC960_WriteCommand:
3496     case DAC960_WriteRetryCommand:
3497       CommandName = "WRITE";
3498       break;
3499     case DAC960_MonitoringCommand:
3500     case DAC960_ImmediateCommand:
3501     case DAC960_QueuedCommand:
3502       break;
3503     }
3504   switch (Command->V1.CommandStatus)
3505     {
3506     case DAC960_V1_IrrecoverableDataError:
3507       DAC960_Error("Irrecoverable Data Error on %s:\n",
3508                    Controller, CommandName);
3509       break;
3510     case DAC960_V1_LogicalDriveNonexistentOrOffline:
3511       DAC960_Error("Logical Drive Nonexistent or Offline on %s:\n",
3512                    Controller, CommandName);
3513       break;
3514     case DAC960_V1_AccessBeyondEndOfLogicalDrive:
3515       DAC960_Error("Attempt to Access Beyond End of Logical Drive "
3516                    "on %s:\n", Controller, CommandName);
3517       break;
3518     case DAC960_V1_BadDataEncountered:
3519       DAC960_Error("Bad Data Encountered on %s:\n", Controller, CommandName);
3520       break;
3521     default:
3522       DAC960_Error("Unexpected Error Status %04X on %s:\n",
3523                    Controller, Command->V1.CommandStatus, CommandName);
3524       break;
3525     }
3526   DAC960_Error("  /dev/rd/c%dd%d:   absolute blocks %u..%u\n",
3527                Controller, Controller->ControllerNumber,
3528                Command->LogicalDriveNumber, Command->BlockNumber,
3529                Command->BlockNumber + Command->BlockCount - 1);
3530 }
3531
3532
3533 /*
3534   DAC960_V1_ProcessCompletedCommand performs completion processing for Command
3535   for DAC960 V1 Firmware Controllers.
3536 */
3537
3538 static void DAC960_V1_ProcessCompletedCommand(DAC960_Command_T *Command)
3539 {
3540   DAC960_Controller_T *Controller = Command->Controller;
3541   DAC960_CommandType_T CommandType = Command->CommandType;
3542   DAC960_V1_CommandOpcode_T CommandOpcode =
3543     Command->V1.CommandMailbox.Common.CommandOpcode;
3544   DAC960_V1_CommandStatus_T CommandStatus = Command->V1.CommandStatus;
3545
3546   if (CommandType == DAC960_ReadCommand ||
3547       CommandType == DAC960_WriteCommand)
3548     {
3549
3550 #ifdef FORCE_RETRY_DEBUG
3551       CommandStatus = DAC960_V1_IrrecoverableDataError;
3552 #endif
3553
3554       if (CommandStatus == DAC960_V1_NormalCompletion) {
3555
3556                 if (!DAC960_ProcessCompletedRequest(Command, true))
3557                         BUG();
3558
3559       } else if (CommandStatus == DAC960_V1_IrrecoverableDataError ||
3560                 CommandStatus == DAC960_V1_BadDataEncountered)
3561         {
3562           /*
3563            * break the command down into pieces and resubmit each
3564            * piece, hoping that some of them will succeed.
3565            */
3566            DAC960_queue_partial_rw(Command);
3567            return;
3568         }
3569       else
3570         {
3571           if (CommandStatus != DAC960_V1_LogicalDriveNonexistentOrOffline)
3572             DAC960_V1_ReadWriteError(Command);
3573
3574          if (!DAC960_ProcessCompletedRequest(Command, false))
3575                 BUG();
3576         }
3577     }
3578   else if (CommandType == DAC960_ReadRetryCommand ||
3579            CommandType == DAC960_WriteRetryCommand)
3580     {
3581       bool normal_completion;
3582 #ifdef FORCE_RETRY_FAILURE_DEBUG
3583       static int retry_count = 1;
3584 #endif
3585       /*
3586         Perform completion processing for the portion that was
3587         retried, and submit the next portion, if any.
3588       */
3589       normal_completion = true;
3590       if (CommandStatus != DAC960_V1_NormalCompletion) {
3591         normal_completion = false;
3592         if (CommandStatus != DAC960_V1_LogicalDriveNonexistentOrOffline)
3593             DAC960_V1_ReadWriteError(Command);
3594       }
3595
3596 #ifdef FORCE_RETRY_FAILURE_DEBUG
3597       if (!(++retry_count % 10000)) {
3598               printk("V1 error retry failure test\n");
3599               normal_completion = false;
3600               DAC960_V1_ReadWriteError(Command);
3601       }
3602 #endif
3603
3604       if (!DAC960_ProcessCompletedRequest(Command, normal_completion)) {
3605         DAC960_queue_partial_rw(Command);
3606         return;
3607       }
3608     }
3609
3610   else if (CommandType == DAC960_MonitoringCommand)
3611     {
3612       if (Controller->ShutdownMonitoringTimer)
3613               return;
3614       if (CommandOpcode == DAC960_V1_Enquiry)
3615         {
3616           DAC960_V1_Enquiry_T *OldEnquiry = &Controller->V1.Enquiry;
3617           DAC960_V1_Enquiry_T *NewEnquiry = Controller->V1.NewEnquiry;
3618           unsigned int OldCriticalLogicalDriveCount =
3619             OldEnquiry->CriticalLogicalDriveCount;
3620           unsigned int NewCriticalLogicalDriveCount =
3621             NewEnquiry->CriticalLogicalDriveCount;
3622           if (NewEnquiry->NumberOfLogicalDrives > Controller->LogicalDriveCount)
3623             {
3624               int LogicalDriveNumber = Controller->LogicalDriveCount - 1;
3625               while (++LogicalDriveNumber < NewEnquiry->NumberOfLogicalDrives)
3626                 DAC960_Critical("Logical Drive %d (/dev/rd/c%dd%d) "
3627                                 "Now Exists\n", Controller,
3628                                 LogicalDriveNumber,
3629                                 Controller->ControllerNumber,
3630                                 LogicalDriveNumber);
3631               Controller->LogicalDriveCount = NewEnquiry->NumberOfLogicalDrives;
3632               DAC960_ComputeGenericDiskInfo(Controller);
3633             }
3634           if (NewEnquiry->NumberOfLogicalDrives < Controller->LogicalDriveCount)
3635             {
3636               int LogicalDriveNumber = NewEnquiry->NumberOfLogicalDrives - 1;
3637               while (++LogicalDriveNumber < Controller->LogicalDriveCount)
3638                 DAC960_Critical("Logical Drive %d (/dev/rd/c%dd%d) "
3639                                 "No Longer Exists\n", Controller,
3640                                 LogicalDriveNumber,
3641                                 Controller->ControllerNumber,
3642                                 LogicalDriveNumber);
3643               Controller->LogicalDriveCount = NewEnquiry->NumberOfLogicalDrives;
3644               DAC960_ComputeGenericDiskInfo(Controller);
3645             }
3646           if (NewEnquiry->StatusFlags.DeferredWriteError !=
3647               OldEnquiry->StatusFlags.DeferredWriteError)
3648             DAC960_Critical("Deferred Write Error Flag is now %s\n", Controller,
3649                             (NewEnquiry->StatusFlags.DeferredWriteError
3650                              ? "TRUE" : "FALSE"));
3651           if ((NewCriticalLogicalDriveCount > 0 ||
3652                NewCriticalLogicalDriveCount != OldCriticalLogicalDriveCount) ||
3653               (NewEnquiry->OfflineLogicalDriveCount > 0 ||
3654                NewEnquiry->OfflineLogicalDriveCount !=
3655                OldEnquiry->OfflineLogicalDriveCount) ||
3656               (NewEnquiry->DeadDriveCount > 0 ||
3657                NewEnquiry->DeadDriveCount !=
3658                OldEnquiry->DeadDriveCount) ||
3659               (NewEnquiry->EventLogSequenceNumber !=
3660                OldEnquiry->EventLogSequenceNumber) ||
3661               Controller->MonitoringTimerCount == 0 ||
3662               time_after_eq(jiffies, Controller->SecondaryMonitoringTime
3663                + DAC960_SecondaryMonitoringInterval))
3664             {
3665               Controller->V1.NeedLogicalDriveInformation = true;
3666               Controller->V1.NewEventLogSequenceNumber =
3667                 NewEnquiry->EventLogSequenceNumber;
3668               Controller->V1.NeedErrorTableInformation = true;
3669               Controller->V1.NeedDeviceStateInformation = true;
3670               Controller->V1.StartDeviceStateScan = true;
3671               Controller->V1.NeedBackgroundInitializationStatus =
3672                 Controller->V1.BackgroundInitializationStatusSupported;
3673               Controller->SecondaryMonitoringTime = jiffies;
3674             }
3675           if (NewEnquiry->RebuildFlag == DAC960_V1_StandbyRebuildInProgress ||
3676               NewEnquiry->RebuildFlag
3677               == DAC960_V1_BackgroundRebuildInProgress ||
3678               OldEnquiry->RebuildFlag == DAC960_V1_StandbyRebuildInProgress ||
3679               OldEnquiry->RebuildFlag == DAC960_V1_BackgroundRebuildInProgress)
3680             {
3681               Controller->V1.NeedRebuildProgress = true;
3682               Controller->V1.RebuildProgressFirst =
3683                 (NewEnquiry->CriticalLogicalDriveCount <
3684                  OldEnquiry->CriticalLogicalDriveCount);
3685             }
3686           if (OldEnquiry->RebuildFlag == DAC960_V1_BackgroundCheckInProgress)
3687             switch (NewEnquiry->RebuildFlag)
3688               {
3689               case DAC960_V1_NoStandbyRebuildOrCheckInProgress:
3690                 DAC960_Progress("Consistency Check Completed Successfully\n",
3691                                 Controller);
3692                 break;
3693               case DAC960_V1_StandbyRebuildInProgress:
3694               case DAC960_V1_BackgroundRebuildInProgress:
3695                 break;
3696               case DAC960_V1_BackgroundCheckInProgress:
3697                 Controller->V1.NeedConsistencyCheckProgress = true;
3698                 break;
3699               case DAC960_V1_StandbyRebuildCompletedWithError:
3700                 DAC960_Progress("Consistency Check Completed with Error\n",
3701                                 Controller);
3702                 break;
3703               case DAC960_V1_BackgroundRebuildOrCheckFailed_DriveFailed:
3704                 DAC960_Progress("Consistency Check Failed - "
3705                                 "Physical Device Failed\n", Controller);
3706                 break;
3707               case DAC960_V1_BackgroundRebuildOrCheckFailed_LogicalDriveFailed:
3708                 DAC960_Progress("Consistency Check Failed - "
3709                                 "Logical Drive Failed\n", Controller);
3710                 break;
3711               case DAC960_V1_BackgroundRebuildOrCheckFailed_OtherCauses:
3712                 DAC960_Progress("Consistency Check Failed - Other Causes\n",
3713                                 Controller);
3714                 break;
3715               case DAC960_V1_BackgroundRebuildOrCheckSuccessfullyTerminated:
3716                 DAC960_Progress("Consistency Check Successfully Terminated\n",
3717                                 Controller);
3718                 break;
3719               }
3720           else if (NewEnquiry->RebuildFlag
3721                    == DAC960_V1_BackgroundCheckInProgress)
3722             Controller->V1.NeedConsistencyCheckProgress = true;
3723           Controller->MonitoringAlertMode =
3724             (NewEnquiry->CriticalLogicalDriveCount > 0 ||
3725              NewEnquiry->OfflineLogicalDriveCount > 0 ||
3726              NewEnquiry->DeadDriveCount > 0);
3727           if (NewEnquiry->RebuildFlag > DAC960_V1_BackgroundCheckInProgress)
3728             {
3729               Controller->V1.PendingRebuildFlag = NewEnquiry->RebuildFlag;
3730               Controller->V1.RebuildFlagPending = true;
3731             }
3732           memcpy(&Controller->V1.Enquiry, &Controller->V1.NewEnquiry,
3733                  sizeof(DAC960_V1_Enquiry_T));
3734         }
3735       else if (CommandOpcode == DAC960_V1_PerformEventLogOperation)
3736         {
3737           static char
3738             *DAC960_EventMessages[] =
3739                { "killed because write recovery failed",
3740                  "killed because of SCSI bus reset failure",
3741                  "killed because of double check condition",
3742                  "killed because it was removed",
3743                  "killed because of gross error on SCSI chip",
3744                  "killed because of bad tag returned from drive",
3745                  "killed because of timeout on SCSI command",
3746                  "killed because of reset SCSI command issued from system",
3747                  "killed because busy or parity error count exceeded limit",
3748                  "killed because of 'kill drive' command from system",
3749                  "killed because of selection timeout",
3750                  "killed due to SCSI phase sequence error",
3751                  "killed due to unknown status" };
3752           DAC960_V1_EventLogEntry_T *EventLogEntry =
3753                 Controller->V1.EventLogEntry;
3754           if (EventLogEntry->SequenceNumber ==
3755               Controller->V1.OldEventLogSequenceNumber)
3756             {
3757               unsigned char SenseKey = EventLogEntry->SenseKey;
3758               unsigned char AdditionalSenseCode =
3759                 EventLogEntry->AdditionalSenseCode;
3760               unsigned char AdditionalSenseCodeQualifier =
3761                 EventLogEntry->AdditionalSenseCodeQualifier;
3762               if (SenseKey == DAC960_SenseKey_VendorSpecific &&
3763                   AdditionalSenseCode == 0x80 &&
3764                   AdditionalSenseCodeQualifier <
3765                   ARRAY_SIZE(DAC960_EventMessages))
3766                 DAC960_Critical("Physical Device %d:%d %s\n", Controller,
3767                                 EventLogEntry->Channel,
3768                                 EventLogEntry->TargetID,
3769                                 DAC960_EventMessages[
3770                                   AdditionalSenseCodeQualifier]);
3771               else if (SenseKey == DAC960_SenseKey_UnitAttention &&
3772                        AdditionalSenseCode == 0x29)
3773                 {
3774                   if (Controller->MonitoringTimerCount > 0)
3775                     Controller->V1.DeviceResetCount[EventLogEntry->Channel]
3776                                                    [EventLogEntry->TargetID]++;
3777                 }
3778               else if (!(SenseKey == DAC960_SenseKey_NoSense ||
3779                          (SenseKey == DAC960_SenseKey_NotReady &&
3780                           AdditionalSenseCode == 0x04 &&
3781                           (AdditionalSenseCodeQualifier == 0x01 ||
3782                            AdditionalSenseCodeQualifier == 0x02))))
3783                 {
3784                   DAC960_Critical("Physical Device %d:%d Error Log: "
3785                                   "Sense Key = %X, ASC = %02X, ASCQ = %02X\n",
3786                                   Controller,
3787                                   EventLogEntry->Channel,
3788                                   EventLogEntry->TargetID,
3789                                   SenseKey,
3790                                   AdditionalSenseCode,
3791                                   AdditionalSenseCodeQualifier);
3792                   DAC960_Critical("Physical Device %d:%d Error Log: "
3793                                   "Information = %02X%02X%02X%02X "
3794                                   "%02X%02X%02X%02X\n",
3795                                   Controller,
3796                                   EventLogEntry->Channel,
3797                                   EventLogEntry->TargetID,
3798                                   EventLogEntry->Information[0],
3799                                   EventLogEntry->Information[1],
3800                                   EventLogEntry->Information[2],
3801                                   EventLogEntry->Information[3],
3802                                   EventLogEntry->CommandSpecificInformation[0],
3803                                   EventLogEntry->CommandSpecificInformation[1],
3804                                   EventLogEntry->CommandSpecificInformation[2],
3805                                   EventLogEntry->CommandSpecificInformation[3]);
3806                 }
3807             }
3808           Controller->V1.OldEventLogSequenceNumber++;
3809         }
3810       else if (CommandOpcode == DAC960_V1_GetErrorTable)
3811         {
3812           DAC960_V1_ErrorTable_T *OldErrorTable = &Controller->V1.ErrorTable;
3813           DAC960_V1_ErrorTable_T *NewErrorTable = Controller->V1.NewErrorTable;
3814           int Channel, TargetID;
3815           for (Channel = 0; Channel < Controller->Channels; Channel++)
3816             for (TargetID = 0; TargetID < Controller->Targets; TargetID++)
3817               {
3818                 DAC960_V1_ErrorTableEntry_T *NewErrorEntry =
3819                   &NewErrorTable->ErrorTableEntries[Channel][TargetID];
3820                 DAC960_V1_ErrorTableEntry_T *OldErrorEntry =
3821                   &OldErrorTable->ErrorTableEntries[Channel][TargetID];
3822                 if ((NewErrorEntry->ParityErrorCount !=
3823                      OldErrorEntry->ParityErrorCount) ||
3824                     (NewErrorEntry->SoftErrorCount !=
3825                      OldErrorEntry->SoftErrorCount) ||
3826                     (NewErrorEntry->HardErrorCount !=
3827                      OldErrorEntry->HardErrorCount) ||
3828                     (NewErrorEntry->MiscErrorCount !=
3829                      OldErrorEntry->MiscErrorCount))
3830                   DAC960_Critical("Physical Device %d:%d Errors: "
3831                                   "Parity = %d, Soft = %d, "
3832                                   "Hard = %d, Misc = %d\n",
3833                                   Controller, Channel, TargetID,
3834                                   NewErrorEntry->ParityErrorCount,
3835                                   NewErrorEntry->SoftErrorCount,
3836                                   NewErrorEntry->HardErrorCount,
3837                                   NewErrorEntry->MiscErrorCount);
3838               }
3839           memcpy(&Controller->V1.ErrorTable, Controller->V1.NewErrorTable,
3840                  sizeof(DAC960_V1_ErrorTable_T));
3841         }
3842       else if (CommandOpcode == DAC960_V1_GetDeviceState)
3843         {
3844           DAC960_V1_DeviceState_T *OldDeviceState =
3845             &Controller->V1.DeviceState[Controller->V1.DeviceStateChannel]
3846                                        [Controller->V1.DeviceStateTargetID];
3847           DAC960_V1_DeviceState_T *NewDeviceState =
3848             Controller->V1.NewDeviceState;
3849           if (NewDeviceState->DeviceState != OldDeviceState->DeviceState)
3850             DAC960_Critical("Physical Device %d:%d is now %s\n", Controller,
3851                             Controller->V1.DeviceStateChannel,
3852                             Controller->V1.DeviceStateTargetID,
3853                             (NewDeviceState->DeviceState
3854                              == DAC960_V1_Device_Dead
3855                              ? "DEAD"
3856                              : NewDeviceState->DeviceState
3857                                == DAC960_V1_Device_WriteOnly
3858                                ? "WRITE-ONLY"
3859                                : NewDeviceState->DeviceState
3860                                  == DAC960_V1_Device_Online
3861                                  ? "ONLINE" : "STANDBY"));
3862           if (OldDeviceState->DeviceState == DAC960_V1_Device_Dead &&
3863               NewDeviceState->DeviceState != DAC960_V1_Device_Dead)
3864             {
3865               Controller->V1.NeedDeviceInquiryInformation = true;
3866               Controller->V1.NeedDeviceSerialNumberInformation = true;
3867               Controller->V1.DeviceResetCount
3868                              [Controller->V1.DeviceStateChannel]
3869                              [Controller->V1.DeviceStateTargetID] = 0;
3870             }
3871           memcpy(OldDeviceState, NewDeviceState,
3872                  sizeof(DAC960_V1_DeviceState_T));
3873         }
3874       else if (CommandOpcode == DAC960_V1_GetLogicalDriveInformation)
3875         {
3876           int LogicalDriveNumber;
3877           for (LogicalDriveNumber = 0;
3878                LogicalDriveNumber < Controller->LogicalDriveCount;
3879                LogicalDriveNumber++)
3880             {
3881               DAC960_V1_LogicalDriveInformation_T *OldLogicalDriveInformation =
3882                 &Controller->V1.LogicalDriveInformation[LogicalDriveNumber];
3883               DAC960_V1_LogicalDriveInformation_T *NewLogicalDriveInformation =
3884                 &(*Controller->V1.NewLogicalDriveInformation)[LogicalDriveNumber];
3885               if (NewLogicalDriveInformation->LogicalDriveState !=
3886                   OldLogicalDriveInformation->LogicalDriveState)
3887                 DAC960_Critical("Logical Drive %d (/dev/rd/c%dd%d) "
3888                                 "is now %s\n", Controller,
3889                                 LogicalDriveNumber,
3890                                 Controller->ControllerNumber,
3891                                 LogicalDriveNumber,
3892                                 (NewLogicalDriveInformation->LogicalDriveState
3893                                  == DAC960_V1_LogicalDrive_Online
3894                                  ? "ONLINE"
3895                                  : NewLogicalDriveInformation->LogicalDriveState
3896                                    == DAC960_V1_LogicalDrive_Critical
3897                                    ? "CRITICAL" : "OFFLINE"));
3898               if (NewLogicalDriveInformation->WriteBack !=
3899                   OldLogicalDriveInformation->WriteBack)
3900                 DAC960_Critical("Logical Drive %d (/dev/rd/c%dd%d) "
3901                                 "is now %s\n", Controller,
3902                                 LogicalDriveNumber,
3903                                 Controller->ControllerNumber,
3904                                 LogicalDriveNumber,
3905                                 (NewLogicalDriveInformation->WriteBack
3906                                  ? "WRITE BACK" : "WRITE THRU"));
3907             }
3908           memcpy(&Controller->V1.LogicalDriveInformation,
3909                  Controller->V1.NewLogicalDriveInformation,
3910                  sizeof(DAC960_V1_LogicalDriveInformationArray_T));
3911         }
3912       else if (CommandOpcode == DAC960_V1_GetRebuildProgress)
3913         {
3914           unsigned int LogicalDriveNumber =
3915             Controller->V1.RebuildProgress->LogicalDriveNumber;
3916           unsigned int LogicalDriveSize =
3917             Controller->V1.RebuildProgress->LogicalDriveSize;
3918           unsigned int BlocksCompleted =
3919             LogicalDriveSize - Controller->V1.RebuildProgress->RemainingBlocks;
3920           if (CommandStatus == DAC960_V1_NoRebuildOrCheckInProgress &&
3921               Controller->V1.LastRebuildStatus == DAC960_V1_NormalCompletion)
3922             CommandStatus = DAC960_V1_RebuildSuccessful;
3923           switch (CommandStatus)
3924             {
3925             case DAC960_V1_NormalCompletion:
3926               Controller->EphemeralProgressMessage = true;
3927               DAC960_Progress("Rebuild in Progress: "
3928                               "Logical Drive %d (/dev/rd/c%dd%d) "
3929                               "%d%% completed\n",
3930                               Controller, LogicalDriveNumber,
3931                               Controller->ControllerNumber,
3932                               LogicalDriveNumber,
3933                               (100 * (BlocksCompleted >> 7))
3934                               / (LogicalDriveSize >> 7));
3935               Controller->EphemeralProgressMessage = false;
3936               break;
3937             case DAC960_V1_RebuildFailed_LogicalDriveFailure:
3938               DAC960_Progress("Rebuild Failed due to "
3939                               "Logical Drive Failure\n", Controller);
3940               break;
3941             case DAC960_V1_RebuildFailed_BadBlocksOnOther:
3942               DAC960_Progress("Rebuild Failed due to "
3943                               "Bad Blocks on Other Drives\n", Controller);
3944               break;
3945             case DAC960_V1_RebuildFailed_NewDriveFailed:
3946               DAC960_Progress("Rebuild Failed due to "
3947                               "Failure of Drive Being Rebuilt\n", Controller);
3948               break;
3949             case DAC960_V1_NoRebuildOrCheckInProgress:
3950               break;
3951             case DAC960_V1_RebuildSuccessful:
3952               DAC960_Progress("Rebuild Completed Successfully\n", Controller);
3953               break;
3954             case DAC960_V1_RebuildSuccessfullyTerminated:
3955               DAC960_Progress("Rebuild Successfully Terminated\n", Controller);
3956               break;
3957             }
3958           Controller->V1.LastRebuildStatus = CommandStatus;
3959           if (CommandType != DAC960_MonitoringCommand &&
3960               Controller->V1.RebuildStatusPending)
3961             {
3962               Command->V1.CommandStatus = Controller->V1.PendingRebuildStatus;
3963               Controller->V1.RebuildStatusPending = false;
3964             }
3965           else if (CommandType == DAC960_MonitoringCommand &&
3966                    CommandStatus != DAC960_V1_NormalCompletion &&
3967                    CommandStatus != DAC960_V1_NoRebuildOrCheckInProgress)
3968             {
3969               Controller->V1.PendingRebuildStatus = CommandStatus;
3970               Controller->V1.RebuildStatusPending = true;
3971             }
3972         }
3973       else if (CommandOpcode == DAC960_V1_RebuildStat)
3974         {
3975           unsigned int LogicalDriveNumber =
3976             Controller->V1.RebuildProgress->LogicalDriveNumber;
3977           unsigned int LogicalDriveSize =
3978             Controller->V1.RebuildProgress->LogicalDriveSize;
3979           unsigned int BlocksCompleted =
3980             LogicalDriveSize - Controller->V1.RebuildProgress->RemainingBlocks;
3981           if (CommandStatus == DAC960_V1_NormalCompletion)
3982             {
3983               Controller->EphemeralProgressMessage = true;
3984               DAC960_Progress("Consistency Check in Progress: "
3985                               "Logical Drive %d (/dev/rd/c%dd%d) "
3986                               "%d%% completed\n",
3987                               Controller, LogicalDriveNumber,
3988                               Controller->ControllerNumber,
3989                               LogicalDriveNumber,
3990                               (100 * (BlocksCompleted >> 7))
3991                               / (LogicalDriveSize >> 7));
3992               Controller->EphemeralProgressMessage = false;
3993             }
3994         }
3995       else if (CommandOpcode == DAC960_V1_BackgroundInitializationControl)
3996         {
3997           unsigned int LogicalDriveNumber =
3998             Controller->V1.BackgroundInitializationStatus->LogicalDriveNumber;
3999           unsigned int LogicalDriveSize =
4000             Controller->V1.BackgroundInitializationStatus->LogicalDriveSize;
4001           unsigned int BlocksCompleted =
4002             Controller->V1.BackgroundInitializationStatus->BlocksCompleted;
4003           switch (CommandStatus)
4004             {
4005             case DAC960_V1_NormalCompletion:
4006               switch (Controller->V1.BackgroundInitializationStatus->Status)
4007                 {
4008                 case DAC960_V1_BackgroundInitializationInvalid:
4009                   break;
4010                 case DAC960_V1_BackgroundInitializationStarted:
4011                   DAC960_Progress("Background Initialization Started\n",
4012                                   Controller);
4013                   break;
4014                 case DAC960_V1_BackgroundInitializationInProgress:
4015                   if (BlocksCompleted ==
4016                       Controller->V1.LastBackgroundInitializationStatus.
4017                                 BlocksCompleted &&
4018                       LogicalDriveNumber ==
4019                       Controller->V1.LastBackgroundInitializationStatus.
4020                                 LogicalDriveNumber)
4021                     break;
4022                   Controller->EphemeralProgressMessage = true;
4023                   DAC960_Progress("Background Initialization in Progress: "
4024                                   "Logical Drive %d (/dev/rd/c%dd%d) "
4025                                   "%d%% completed\n",
4026                                   Controller, LogicalDriveNumber,
4027                                   Controller->ControllerNumber,
4028                                   LogicalDriveNumber,
4029                                   (100 * (BlocksCompleted >> 7))
4030                                   / (LogicalDriveSize >> 7));
4031                   Controller->EphemeralProgressMessage = false;
4032                   break;
4033                 case DAC960_V1_BackgroundInitializationSuspended:
4034                   DAC960_Progress("Background Initialization Suspended\n",
4035                                   Controller);
4036                   break;
4037                 case DAC960_V1_BackgroundInitializationCancelled:
4038                   DAC960_Progress("Background Initialization Cancelled\n",
4039                                   Controller);
4040                   break;
4041                 }
4042               memcpy(&Controller->V1.LastBackgroundInitializationStatus,
4043                      Controller->V1.BackgroundInitializationStatus,
4044                      sizeof(DAC960_V1_BackgroundInitializationStatus_T));
4045               break;
4046             case DAC960_V1_BackgroundInitSuccessful:
4047               if (Controller->V1.BackgroundInitializationStatus->Status ==
4048                   DAC960_V1_BackgroundInitializationInProgress)
4049                 DAC960_Progress("Background Initialization "
4050                                 "Completed Successfully\n", Controller);
4051               Controller->V1.BackgroundInitializationStatus->Status =
4052                 DAC960_V1_BackgroundInitializationInvalid;
4053               break;
4054             case DAC960_V1_BackgroundInitAborted:
4055               if (Controller->V1.BackgroundInitializationStatus->Status ==
4056                   DAC960_V1_BackgroundInitializationInProgress)
4057                 DAC960_Progress("Background Initialization Aborted\n",
4058                                 Controller);
4059               Controller->V1.BackgroundInitializationStatus->Status =
4060                 DAC960_V1_BackgroundInitializationInvalid;
4061               break;
4062             case DAC960_V1_NoBackgroundInitInProgress:
4063               break;
4064             }
4065         }
4066       else if (CommandOpcode == DAC960_V1_DCDB)
4067         {
4068            /*
4069              This is a bit ugly.
4070
4071              The InquiryStandardData and
4072              the InquiryUntitSerialNumber information
4073              retrieval operations BOTH use the DAC960_V1_DCDB
4074              commands.  the test above can't distinguish between
4075              these two cases.
4076
4077              Instead, we rely on the order of code later in this
4078              function to ensure that DeviceInquiryInformation commands
4079              are submitted before DeviceSerialNumber commands.
4080            */
4081            if (Controller->V1.NeedDeviceInquiryInformation)
4082              {
4083                 DAC960_SCSI_Inquiry_T *InquiryStandardData =
4084                         &Controller->V1.InquiryStandardData
4085                                 [Controller->V1.DeviceStateChannel]
4086                                 [Controller->V1.DeviceStateTargetID];
4087                 if (CommandStatus != DAC960_V1_NormalCompletion)
4088                    {
4089                         memset(InquiryStandardData, 0,
4090                                 sizeof(DAC960_SCSI_Inquiry_T));
4091                         InquiryStandardData->PeripheralDeviceType = 0x1F;
4092                     }
4093                  else
4094                         memcpy(InquiryStandardData,
4095                                 Controller->V1.NewInquiryStandardData,
4096                                 sizeof(DAC960_SCSI_Inquiry_T));
4097                  Controller->V1.NeedDeviceInquiryInformation = false;
4098               }
4099            else if (Controller->V1.NeedDeviceSerialNumberInformation)
4100               {
4101                 DAC960_SCSI_Inquiry_UnitSerialNumber_T *InquiryUnitSerialNumber =
4102                   &Controller->V1.InquiryUnitSerialNumber
4103                                 [Controller->V1.DeviceStateChannel]
4104                                 [Controller->V1.DeviceStateTargetID];
4105                  if (CommandStatus != DAC960_V1_NormalCompletion)
4106                    {
4107                         memset(InquiryUnitSerialNumber, 0,
4108                                 sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T));
4109                         InquiryUnitSerialNumber->PeripheralDeviceType = 0x1F;
4110                     }
4111                   else
4112                         memcpy(InquiryUnitSerialNumber,
4113                                 Controller->V1.NewInquiryUnitSerialNumber,
4114                                 sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T));
4115               Controller->V1.NeedDeviceSerialNumberInformation = false;
4116              }
4117         }
4118       /*
4119         Begin submitting new monitoring commands.
4120        */
4121       if (Controller->V1.NewEventLogSequenceNumber
4122           - Controller->V1.OldEventLogSequenceNumber > 0)
4123         {
4124           Command->V1.CommandMailbox.Type3E.CommandOpcode =
4125             DAC960_V1_PerformEventLogOperation;
4126           Command->V1.CommandMailbox.Type3E.OperationType =
4127             DAC960_V1_GetEventLogEntry;
4128           Command->V1.CommandMailbox.Type3E.OperationQualifier = 1;
4129           Command->V1.CommandMailbox.Type3E.SequenceNumber =
4130             Controller->V1.OldEventLogSequenceNumber;
4131           Command->V1.CommandMailbox.Type3E.BusAddress =
4132                 Controller->V1.EventLogEntryDMA;
4133           DAC960_QueueCommand(Command);
4134           return;
4135         }
4136       if (Controller->V1.NeedErrorTableInformation)
4137         {
4138           Controller->V1.NeedErrorTableInformation = false;
4139           Command->V1.CommandMailbox.Type3.CommandOpcode =
4140             DAC960_V1_GetErrorTable;
4141           Command->V1.CommandMailbox.Type3.BusAddress =
4142                 Controller->V1.NewErrorTableDMA;
4143           DAC960_QueueCommand(Command);
4144           return;
4145         }
4146       if (Controller->V1.NeedRebuildProgress &&
4147           Controller->V1.RebuildProgressFirst)
4148         {
4149           Controller->V1.NeedRebuildProgress = false;
4150           Command->V1.CommandMailbox.Type3.CommandOpcode =
4151             DAC960_V1_GetRebuildProgress;
4152           Command->V1.CommandMailbox.Type3.BusAddress =
4153             Controller->V1.RebuildProgressDMA;
4154           DAC960_QueueCommand(Command);
4155           return;
4156         }
4157       if (Controller->V1.NeedDeviceStateInformation)
4158         {
4159           if (Controller->V1.NeedDeviceInquiryInformation)
4160             {
4161               DAC960_V1_DCDB_T *DCDB = Controller->V1.MonitoringDCDB;
4162               dma_addr_t DCDB_DMA = Controller->V1.MonitoringDCDB_DMA;
4163
4164               dma_addr_t NewInquiryStandardDataDMA =
4165                 Controller->V1.NewInquiryStandardDataDMA;
4166
4167               Command->V1.CommandMailbox.Type3.CommandOpcode = DAC960_V1_DCDB;
4168               Command->V1.CommandMailbox.Type3.BusAddress = DCDB_DMA;
4169               DCDB->Channel = Controller->V1.DeviceStateChannel;
4170               DCDB->TargetID = Controller->V1.DeviceStateTargetID;
4171               DCDB->Direction = DAC960_V1_DCDB_DataTransferDeviceToSystem;
4172               DCDB->EarlyStatus = false;
4173               DCDB->Timeout = DAC960_V1_DCDB_Timeout_10_seconds;
4174               DCDB->NoAutomaticRequestSense = false;
4175               DCDB->DisconnectPermitted = true;
4176               DCDB->TransferLength = sizeof(DAC960_SCSI_Inquiry_T);
4177               DCDB->BusAddress = NewInquiryStandardDataDMA;
4178               DCDB->CDBLength = 6;
4179               DCDB->TransferLengthHigh4 = 0;
4180               DCDB->SenseLength = sizeof(DCDB->SenseData);
4181               DCDB->CDB[0] = 0x12; /* INQUIRY */
4182               DCDB->CDB[1] = 0; /* EVPD = 0 */
4183               DCDB->CDB[2] = 0; /* Page Code */
4184               DCDB->CDB[3] = 0; /* Reserved */
4185               DCDB->CDB[4] = sizeof(DAC960_SCSI_Inquiry_T);
4186               DCDB->CDB[5] = 0; /* Control */
4187               DAC960_QueueCommand(Command);
4188               return;
4189             }
4190           if (Controller->V1.NeedDeviceSerialNumberInformation)
4191             {
4192               DAC960_V1_DCDB_T *DCDB = Controller->V1.MonitoringDCDB;
4193               dma_addr_t DCDB_DMA = Controller->V1.MonitoringDCDB_DMA;
4194               dma_addr_t NewInquiryUnitSerialNumberDMA =
4195                         Controller->V1.NewInquiryUnitSerialNumberDMA;
4196
4197               Command->V1.CommandMailbox.Type3.CommandOpcode = DAC960_V1_DCDB;
4198               Command->V1.CommandMailbox.Type3.BusAddress = DCDB_DMA;
4199               DCDB->Channel = Controller->V1.DeviceStateChannel;
4200               DCDB->TargetID = Controller->V1.DeviceStateTargetID;
4201               DCDB->Direction = DAC960_V1_DCDB_DataTransferDeviceToSystem;
4202               DCDB->EarlyStatus = false;
4203               DCDB->Timeout = DAC960_V1_DCDB_Timeout_10_seconds;
4204               DCDB->NoAutomaticRequestSense = false;
4205               DCDB->DisconnectPermitted = true;
4206               DCDB->TransferLength =
4207                 sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T);
4208               DCDB->BusAddress = NewInquiryUnitSerialNumberDMA;
4209               DCDB->CDBLength = 6;
4210               DCDB->TransferLengthHigh4 = 0;
4211               DCDB->SenseLength = sizeof(DCDB->SenseData);
4212               DCDB->CDB[0] = 0x12; /* INQUIRY */
4213               DCDB->CDB[1] = 1; /* EVPD = 1 */
4214               DCDB->CDB[2] = 0x80; /* Page Code */
4215               DCDB->CDB[3] = 0; /* Reserved */
4216               DCDB->CDB[4] = sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T);
4217               DCDB->CDB[5] = 0; /* Control */
4218               DAC960_QueueCommand(Command);
4219               return;
4220             }
4221           if (Controller->V1.StartDeviceStateScan)
4222             {
4223               Controller->V1.DeviceStateChannel = 0;
4224               Controller->V1.DeviceStateTargetID = 0;
4225               Controller->V1.StartDeviceStateScan = false;
4226             }
4227           else if (++Controller->V1.DeviceStateTargetID == Controller->Targets)
4228             {
4229               Controller->V1.DeviceStateChannel++;
4230               Controller->V1.DeviceStateTargetID = 0;
4231             }
4232           if (Controller->V1.DeviceStateChannel < Controller->Channels)
4233             {
4234               Controller->V1.NewDeviceState->DeviceState =
4235                 DAC960_V1_Device_Dead;
4236               Command->V1.CommandMailbox.Type3D.CommandOpcode =
4237                 DAC960_V1_GetDeviceState;
4238               Command->V1.CommandMailbox.Type3D.Channel =
4239                 Controller->V1.DeviceStateChannel;
4240               Command->V1.CommandMailbox.Type3D.TargetID =
4241                 Controller->V1.DeviceStateTargetID;
4242               Command->V1.CommandMailbox.Type3D.BusAddress =
4243                 Controller->V1.NewDeviceStateDMA;
4244               DAC960_QueueCommand(Command);
4245               return;
4246             }
4247           Controller->V1.NeedDeviceStateInformation = false;
4248         }
4249       if (Controller->V1.NeedLogicalDriveInformation)
4250         {
4251           Controller->V1.NeedLogicalDriveInformation = false;
4252           Command->V1.CommandMailbox.Type3.CommandOpcode =
4253             DAC960_V1_GetLogicalDriveInformation;
4254           Command->V1.CommandMailbox.Type3.BusAddress =
4255             Controller->V1.NewLogicalDriveInformationDMA;
4256           DAC960_QueueCommand(Command);
4257           return;
4258         }
4259       if (Controller->V1.NeedRebuildProgress)
4260         {
4261           Controller->V1.NeedRebuildProgress = false;
4262           Command->V1.CommandMailbox.Type3.CommandOpcode =
4263             DAC960_V1_GetRebuildProgress;
4264           Command->V1.CommandMailbox.Type3.BusAddress =
4265                 Controller->V1.RebuildProgressDMA;
4266           DAC960_QueueCommand(Command);
4267           return;
4268         }
4269       if (Controller->V1.NeedConsistencyCheckProgress)
4270         {
4271           Controller->V1.NeedConsistencyCheckProgress = false;
4272           Command->V1.CommandMailbox.Type3.CommandOpcode =
4273             DAC960_V1_RebuildStat;
4274           Command->V1.CommandMailbox.Type3.BusAddress =
4275             Controller->V1.RebuildProgressDMA;
4276           DAC960_QueueCommand(Command);
4277           return;
4278         }
4279       if (Controller->V1.NeedBackgroundInitializationStatus)
4280         {
4281           Controller->V1.NeedBackgroundInitializationStatus = false;
4282           Command->V1.CommandMailbox.Type3B.CommandOpcode =
4283             DAC960_V1_BackgroundInitializationControl;
4284           Command->V1.CommandMailbox.Type3B.CommandOpcode2 = 0x20;
4285           Command->V1.CommandMailbox.Type3B.BusAddress =
4286             Controller->V1.BackgroundInitializationStatusDMA;
4287           DAC960_QueueCommand(Command);
4288           return;
4289         }
4290       Controller->MonitoringTimerCount++;
4291       Controller->MonitoringTimer.expires =
4292         jiffies + DAC960_MonitoringTimerInterval;
4293         add_timer(&Controller->MonitoringTimer);
4294     }
4295   if (CommandType == DAC960_ImmediateCommand)
4296     {
4297       complete(Command->Completion);
4298       Command->Completion = NULL;
4299       return;
4300     }
4301   if (CommandType == DAC960_QueuedCommand)
4302     {
4303       DAC960_V1_KernelCommand_T *KernelCommand = Command->V1.KernelCommand;
4304       KernelCommand->CommandStatus = Command->V1.CommandStatus;
4305       Command->V1.KernelCommand = NULL;
4306       if (CommandOpcode == DAC960_V1_DCDB)
4307         Controller->V1.DirectCommandActive[KernelCommand->DCDB->Channel]
4308                                           [KernelCommand->DCDB->TargetID] =
4309           false;
4310       DAC960_DeallocateCommand(Command);
4311       KernelCommand->CompletionFunction(KernelCommand);
4312       return;
4313     }
4314   /*
4315     Queue a Status Monitoring Command to the Controller using the just
4316     completed Command if one was deferred previously due to lack of a
4317     free Command when the Monitoring Timer Function was called.
4318   */
4319   if (Controller->MonitoringCommandDeferred)
4320     {
4321       Controller->MonitoringCommandDeferred = false;
4322       DAC960_V1_QueueMonitoringCommand(Command);
4323       return;
4324     }
4325   /*
4326     Deallocate the Command.
4327   */
4328   DAC960_DeallocateCommand(Command);
4329   /*
4330     Wake up any processes waiting on a free Command.
4331   */
4332   wake_up(&Controller->CommandWaitQueue);
4333 }
4334
4335
4336 /*
4337   DAC960_V2_ReadWriteError prints an appropriate error message for Command
4338   when an error occurs on a Read or Write operation.
4339 */
4340
4341 static void DAC960_V2_ReadWriteError(DAC960_Command_T *Command)
4342 {
4343   DAC960_Controller_T *Controller = Command->Controller;
4344   unsigned char *SenseErrors[] = { "NO SENSE", "RECOVERED ERROR",
4345                                    "NOT READY", "MEDIUM ERROR",
4346                                    "HARDWARE ERROR", "ILLEGAL REQUEST",
4347                                    "UNIT ATTENTION", "DATA PROTECT",
4348                                    "BLANK CHECK", "VENDOR-SPECIFIC",
4349                                    "COPY ABORTED", "ABORTED COMMAND",
4350                                    "EQUAL", "VOLUME OVERFLOW",
4351                                    "MISCOMPARE", "RESERVED" };
4352   unsigned char *CommandName = "UNKNOWN";
4353   switch (Command->CommandType)
4354     {
4355     case DAC960_ReadCommand:
4356     case DAC960_ReadRetryCommand:
4357       CommandName = "READ";
4358       break;
4359     case DAC960_WriteCommand:
4360     case DAC960_WriteRetryCommand:
4361       CommandName = "WRITE";
4362       break;
4363     case DAC960_MonitoringCommand:
4364     case DAC960_ImmediateCommand:
4365     case DAC960_QueuedCommand:
4366       break;
4367     }
4368   DAC960_Error("Error Condition %s on %s:\n", Controller,
4369                SenseErrors[Command->V2.RequestSense->SenseKey], CommandName);
4370   DAC960_Error("  /dev/rd/c%dd%d:   absolute blocks %u..%u\n",
4371                Controller, Controller->ControllerNumber,
4372                Command->LogicalDriveNumber, Command->BlockNumber,
4373                Command->BlockNumber + Command->BlockCount - 1);
4374 }
4375
4376
4377 /*
4378   DAC960_V2_ReportEvent prints an appropriate message when a Controller Event
4379   occurs.
4380 */
4381
4382 static void DAC960_V2_ReportEvent(DAC960_Controller_T *Controller,
4383                                   DAC960_V2_Event_T *Event)
4384 {
4385   DAC960_SCSI_RequestSense_T *RequestSense =
4386     (DAC960_SCSI_RequestSense_T *) &Event->RequestSenseData;
4387   unsigned char MessageBuffer[DAC960_LineBufferSize];
4388   static struct { int EventCode; unsigned char *EventMessage; } EventList[] =
4389     { /* Physical Device Events (0x0000 - 0x007F) */
4390       { 0x0001, "P Online" },
4391       { 0x0002, "P Standby" },
4392       { 0x0005, "P Automatic Rebuild Started" },
4393       { 0x0006, "P Manual Rebuild Started" },
4394       { 0x0007, "P Rebuild Completed" },
4395       { 0x0008, "P Rebuild Cancelled" },
4396       { 0x0009, "P Rebuild Failed for Unknown Reasons" },
4397       { 0x000A, "P Rebuild Failed due to New Physical Device" },
4398       { 0x000B, "P Rebuild Failed due to Logical Drive Failure" },
4399       { 0x000C, "S Offline" },
4400       { 0x000D, "P Found" },
4401       { 0x000E, "P Removed" },
4402       { 0x000F, "P Unconfigured" },
4403       { 0x0010, "P Expand Capacity Started" },
4404       { 0x0011, "P Expand Capacity Completed" },
4405       { 0x0012, "P Expand Capacity Failed" },
4406       { 0x0013, "P Command Timed Out" },
4407       { 0x0014, "P Command Aborted" },
4408       { 0x0015, "P Command Retried" },
4409       { 0x0016, "P Parity Error" },
4410       { 0x0017, "P Soft Error" },
4411       { 0x0018, "P Miscellaneous Error" },
4412       { 0x0019, "P Reset" },
4413       { 0x001A, "P Active Spare Found" },
4414       { 0x001B, "P Warm Spare Found" },
4415       { 0x001C, "S Sense Data Received" },
4416       { 0x001D, "P Initialization Started" },
4417       { 0x001E, "P Initialization Completed" },
4418       { 0x001F, "P Initialization Failed" },
4419       { 0x0020, "P Initialization Cancelled" },
4420       { 0x0021, "P Failed because Write Recovery Failed" },
4421       { 0x0022, "P Failed because SCSI Bus Reset Failed" },
4422       { 0x0023, "P Failed because of Double Check Condition" },
4423       { 0x0024, "P Failed because Device Cannot Be Accessed" },
4424       { 0x0025, "P Failed because of Gross Error on SCSI Processor" },
4425       { 0x0026, "P Failed because of Bad Tag from Device" },
4426       { 0x0027, "P Failed because of Command Timeout" },
4427       { 0x0028, "P Failed because of System Reset" },
4428       { 0x0029, "P Failed because of Busy Status or Parity Error" },
4429       { 0x002A, "P Failed because Host Set Device to Failed State" },
4430       { 0x002B, "P Failed because of Selection Timeout" },
4431       { 0x002C, "P Failed because of SCSI Bus Phase Error" },
4432       { 0x002D, "P Failed because Device Returned Unknown Status" },
4433       { 0x002E, "P Failed because Device Not Ready" },
4434       { 0x002F, "P Failed because Device Not Found at Startup" },
4435       { 0x0030, "P Failed because COD Write Operation Failed" },
4436       { 0x0031, "P Failed because BDT Write Operation Failed" },
4437       { 0x0039, "P Missing at Startup" },
4438       { 0x003A, "P Start Rebuild Failed due to Physical Drive Too Small" },
4439       { 0x003C, "P Temporarily Offline Device Automatically Made Online" },
4440       { 0x003D, "P Standby Rebuild Started" },
4441       /* Logical Device Events (0x0080 - 0x00FF) */
4442       { 0x0080, "M Consistency Check Started" },
4443       { 0x0081, "M Consistency Check Completed" },
4444       { 0x0082, "M Consistency Check Cancelled" },
4445       { 0x0083, "M Consistency Check Completed With Errors" },
4446       { 0x0084, "M Consistency Check Failed due to Logical Drive Failure" },
4447       { 0x0085, "M Consistency Check Failed due to Physical Device Failure" },
4448       { 0x0086, "L Offline" },
4449       { 0x0087, "L Critical" },
4450       { 0x0088, "L Online" },
4451       { 0x0089, "M Automatic Rebuild Started" },
4452       { 0x008A, "M Manual Rebuild Started" },
4453       { 0x008B, "M Rebuild Completed" },
4454       { 0x008C, "M Rebuild Cancelled" },
4455       { 0x008D, "M Rebuild Failed for Unknown Reasons" },
4456       { 0x008E, "M Rebuild Failed due to New Physical Device" },
4457       { 0x008F, "M Rebuild Failed due to Logical Drive Failure" },
4458       { 0x0090, "M Initialization Started" },
4459       { 0x0091, "M Initialization Completed" },
4460       { 0x0092, "M Initialization Cancelled" },
4461       { 0x0093, "M Initialization Failed" },
4462       { 0x0094, "L Found" },
4463       { 0x0095, "L Deleted" },
4464       { 0x0096, "M Expand Capacity Started" },
4465       { 0x0097, "M Expand Capacity Completed" },
4466       { 0x0098, "M Expand Capacity Failed" },
4467       { 0x0099, "L Bad Block Found" },
4468       { 0x009A, "L Size Changed" },
4469       { 0x009B, "L Type Changed" },
4470       { 0x009C, "L Bad Data Block Found" },
4471       { 0x009E, "L Read of Data Block in BDT" },
4472       { 0x009F, "L Write Back Data for Disk Block Lost" },
4473       { 0x00A0, "L Temporarily Offline RAID-5/3 Drive Made Online" },
4474       { 0x00A1, "L Temporarily Offline RAID-6/1/0/7 Drive Made Online" },
4475       { 0x00A2, "L Standby Rebuild Started" },
4476       /* Fault Management Events (0x0100 - 0x017F) */
4477       { 0x0140, "E Fan %d Failed" },
4478       { 0x0141, "E Fan %d OK" },
4479       { 0x0142, "E Fan %d Not Present" },
4480       { 0x0143, "E Power Supply %d Failed" },
4481       { 0x0144, "E Power Supply %d OK" },
4482       { 0x0145, "E Power Supply %d Not Present" },
4483       { 0x0146, "E Temperature Sensor %d Temperature Exceeds Safe Limit" },
4484       { 0x0147, "E Temperature Sensor %d Temperature Exceeds Working Limit" },
4485       { 0x0148, "E Temperature Sensor %d Temperature Normal" },
4486       { 0x0149, "E Temperature Sensor %d Not Present" },
4487       { 0x014A, "E Enclosure Management Unit %d Access Critical" },
4488       { 0x014B, "E Enclosure Management Unit %d Access OK" },
4489       { 0x014C, "E Enclosure Management Unit %d Access Offline" },
4490       /* Controller Events (0x0180 - 0x01FF) */
4491       { 0x0181, "C Cache Write Back Error" },
4492       { 0x0188, "C Battery Backup Unit Found" },
4493       { 0x0189, "C Battery Backup Unit Charge Level Low" },
4494       { 0x018A, "C Battery Backup Unit Charge Level OK" },
4495       { 0x0193, "C Installation Aborted" },
4496       { 0x0195, "C Battery Backup Unit Physically Removed" },
4497       { 0x0196, "C Memory Error During Warm Boot" },
4498       { 0x019E, "C Memory Soft ECC Error Corrected" },
4499       { 0x019F, "C Memory Hard ECC Error Corrected" },
4500       { 0x01A2, "C Battery Backup Unit Failed" },
4501       { 0x01AB, "C Mirror Race Recovery Failed" },
4502       { 0x01AC, "C Mirror Race on Critical Drive" },
4503       /* Controller Internal Processor Events */
4504       { 0x0380, "C Internal Controller Hung" },
4505       { 0x0381, "C Internal Controller Firmware Breakpoint" },
4506       { 0x0390, "C Internal Controller i960 Processor Specific Error" },
4507       { 0x03A0, "C Internal Controller StrongARM Processor Specific Error" },
4508       { 0, "" } };
4509   int EventListIndex = 0, EventCode;
4510   unsigned char EventType, *EventMessage;
4511   if (Event->EventCode == 0x1C &&
4512       RequestSense->SenseKey == DAC960_SenseKey_VendorSpecific &&
4513       (RequestSense->AdditionalSenseCode == 0x80 ||
4514        RequestSense->AdditionalSenseCode == 0x81))
4515     Event->EventCode = ((RequestSense->AdditionalSenseCode - 0x80) << 8) |
4516                        RequestSense->AdditionalSenseCodeQualifier;
4517   while (true)
4518     {
4519       EventCode = EventList[EventListIndex].EventCode;
4520       if (EventCode == Event->EventCode || EventCode == 0) break;
4521       EventListIndex++;
4522     }
4523   EventType = EventList[EventListIndex].EventMessage[0];
4524   EventMessage = &EventList[EventListIndex].EventMessage[2];
4525   if (EventCode == 0)
4526     {
4527       DAC960_Critical("Unknown Controller Event Code %04X\n",
4528                       Controller, Event->EventCode);
4529       return;
4530     }
4531   switch (EventType)
4532     {
4533     case 'P':
4534       DAC960_Critical("Physical Device %d:%d %s\n", Controller,
4535                       Event->Channel, Event->TargetID, EventMessage);
4536       break;
4537     case 'L':
4538       DAC960_Critical("Logical Drive %d (/dev/rd/c%dd%d) %s\n", Controller,
4539                       Event->LogicalUnit, Controller->ControllerNumber,
4540                       Event->LogicalUnit, EventMessage);
4541       break;
4542     case 'M':
4543       DAC960_Progress("Logical Drive %d (/dev/rd/c%dd%d) %s\n", Controller,
4544                       Event->LogicalUnit, Controller->ControllerNumber,
4545                       Event->LogicalUnit, EventMessage);
4546       break;
4547     case 'S':
4548       if (RequestSense->SenseKey == DAC960_SenseKey_NoSense ||
4549           (RequestSense->SenseKey == DAC960_SenseKey_NotReady &&
4550            RequestSense->AdditionalSenseCode == 0x04 &&
4551            (RequestSense->AdditionalSenseCodeQualifier == 0x01 ||
4552             RequestSense->AdditionalSenseCodeQualifier == 0x02)))
4553         break;
4554       DAC960_Critical("Physical Device %d:%d %s\n", Controller,
4555                       Event->Channel, Event->TargetID, EventMessage);
4556       DAC960_Critical("Physical Device %d:%d Request Sense: "
4557                       "Sense Key = %X, ASC = %02X, ASCQ = %02X\n",
4558                       Controller,
4559                       Event->Channel,
4560                       Event->TargetID,
4561                       RequestSense->SenseKey,
4562                       RequestSense->AdditionalSenseCode,
4563                       RequestSense->AdditionalSenseCodeQualifier);
4564       DAC960_Critical("Physical Device %d:%d Request Sense: "
4565                       "Information = %02X%02X%02X%02X "
4566                       "%02X%02X%02X%02X\n",
4567                       Controller,
4568                       Event->Channel,
4569                       Event->TargetID,
4570                       RequestSense->Information[0],
4571                       RequestSense->Information[1],
4572                       RequestSense->Information[2],
4573                       RequestSense->Information[3],
4574                       RequestSense->CommandSpecificInformation[0],
4575                       RequestSense->CommandSpecificInformation[1],
4576                       RequestSense->CommandSpecificInformation[2],
4577                       RequestSense->CommandSpecificInformation[3]);
4578       break;
4579     case 'E':
4580       if (Controller->SuppressEnclosureMessages) break;
4581       sprintf(MessageBuffer, EventMessage, Event->LogicalUnit);
4582       DAC960_Critical("Enclosure %d %s\n", Controller,
4583                       Event->TargetID, MessageBuffer);
4584       break;
4585     case 'C':
4586       DAC960_Critical("Controller %s\n", Controller, EventMessage);
4587       break;
4588     default:
4589       DAC960_Critical("Unknown Controller Event Code %04X\n",
4590                       Controller, Event->EventCode);
4591       break;
4592     }
4593 }
4594
4595
4596 /*
4597   DAC960_V2_ReportProgress prints an appropriate progress message for
4598   Logical Device Long Operations.
4599 */
4600
4601 static void DAC960_V2_ReportProgress(DAC960_Controller_T *Controller,
4602                                      unsigned char *MessageString,
4603                                      unsigned int LogicalDeviceNumber,
4604                                      unsigned long BlocksCompleted,
4605                                      unsigned long LogicalDeviceSize)
4606 {
4607   Controller->EphemeralProgressMessage = true;
4608   DAC960_Progress("%s in Progress: Logical Drive %d (/dev/rd/c%dd%d) "
4609                   "%d%% completed\n", Controller,
4610                   MessageString,
4611                   LogicalDeviceNumber,
4612                   Controller->ControllerNumber,
4613                   LogicalDeviceNumber,
4614                   (100 * (BlocksCompleted >> 7)) / (LogicalDeviceSize >> 7));
4615   Controller->EphemeralProgressMessage = false;
4616 }
4617
4618
4619 /*
4620   DAC960_V2_ProcessCompletedCommand performs completion processing for Command
4621   for DAC960 V2 Firmware Controllers.
4622 */
4623
4624 static void DAC960_V2_ProcessCompletedCommand(DAC960_Command_T *Command)
4625 {
4626   DAC960_Controller_T *Controller = Command->Controller;
4627   DAC960_CommandType_T CommandType = Command->CommandType;
4628   DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox;
4629   DAC960_V2_IOCTL_Opcode_T CommandOpcode = CommandMailbox->Common.IOCTL_Opcode;
4630   DAC960_V2_CommandStatus_T CommandStatus = Command->V2.CommandStatus;
4631
4632   if (CommandType == DAC960_ReadCommand ||
4633       CommandType == DAC960_WriteCommand)
4634     {
4635
4636 #ifdef FORCE_RETRY_DEBUG
4637       CommandStatus = DAC960_V2_AbormalCompletion;
4638 #endif
4639       Command->V2.RequestSense->SenseKey = DAC960_SenseKey_MediumError;
4640
4641       if (CommandStatus == DAC960_V2_NormalCompletion) {
4642
4643                 if (!DAC960_ProcessCompletedRequest(Command, true))
4644                         BUG();
4645
4646       } else if (Command->V2.RequestSense->SenseKey == DAC960_SenseKey_MediumError)
4647         {
4648           /*
4649            * break the command down into pieces and resubmit each
4650            * piece, hoping that some of them will succeed.
4651            */
4652            DAC960_queue_partial_rw(Command);
4653            return;
4654         }
4655       else
4656         {
4657           if (Command->V2.RequestSense->SenseKey != DAC960_SenseKey_NotReady)
4658             DAC960_V2_ReadWriteError(Command);
4659           /*
4660             Perform completion processing for all buffers in this I/O Request.
4661           */
4662           (void)DAC960_ProcessCompletedRequest(Command, false);
4663         }
4664     }
4665   else if (CommandType == DAC960_ReadRetryCommand ||
4666            CommandType == DAC960_WriteRetryCommand)
4667     {
4668       bool normal_completion;
4669
4670 #ifdef FORCE_RETRY_FAILURE_DEBUG
4671       static int retry_count = 1;
4672 #endif
4673       /*
4674         Perform completion processing for the portion that was
4675         retried, and submit the next portion, if any.
4676       */
4677       normal_completion = true;
4678       if (CommandStatus != DAC960_V2_NormalCompletion) {
4679         normal_completion = false;
4680         if (Command->V2.RequestSense->SenseKey != DAC960_SenseKey_NotReady)
4681             DAC960_V2_ReadWriteError(Command);
4682       }
4683
4684 #ifdef FORCE_RETRY_FAILURE_DEBUG
4685       if (!(++retry_count % 10000)) {
4686               printk("V2 error retry failure test\n");
4687               normal_completion = false;
4688               DAC960_V2_ReadWriteError(Command);
4689       }
4690 #endif
4691
4692       if (!DAC960_ProcessCompletedRequest(Command, normal_completion)) {
4693                 DAC960_queue_partial_rw(Command);
4694                 return;
4695       }
4696     }
4697   else if (CommandType == DAC960_MonitoringCommand)
4698     {
4699       if (Controller->ShutdownMonitoringTimer)
4700               return;
4701       if (CommandOpcode == DAC960_V2_GetControllerInfo)
4702         {
4703           DAC960_V2_ControllerInfo_T *NewControllerInfo =
4704             Controller->V2.NewControllerInformation;
4705           DAC960_V2_ControllerInfo_T *ControllerInfo =
4706             &Controller->V2.ControllerInformation;
4707           Controller->LogicalDriveCount =
4708             NewControllerInfo->LogicalDevicesPresent;
4709           Controller->V2.NeedLogicalDeviceInformation = true;
4710           Controller->V2.NeedPhysicalDeviceInformation = true;
4711           Controller->V2.StartLogicalDeviceInformationScan = true;
4712           Controller->V2.StartPhysicalDeviceInformationScan = true;
4713           Controller->MonitoringAlertMode =
4714             (NewControllerInfo->LogicalDevicesCritical > 0 ||
4715              NewControllerInfo->LogicalDevicesOffline > 0 ||
4716              NewControllerInfo->PhysicalDisksCritical > 0 ||
4717              NewControllerInfo->PhysicalDisksOffline > 0);
4718           memcpy(ControllerInfo, NewControllerInfo,
4719                  sizeof(DAC960_V2_ControllerInfo_T));
4720         }
4721       else if (CommandOpcode == DAC960_V2_GetEvent)
4722         {
4723           if (CommandStatus == DAC960_V2_NormalCompletion) {
4724             DAC960_V2_ReportEvent(Controller, Controller->V2.Event);
4725           }
4726           Controller->V2.NextEventSequenceNumber++;
4727         }
4728       else if (CommandOpcode == DAC960_V2_GetPhysicalDeviceInfoValid &&
4729                CommandStatus == DAC960_V2_NormalCompletion)
4730         {
4731           DAC960_V2_PhysicalDeviceInfo_T *NewPhysicalDeviceInfo =
4732             Controller->V2.NewPhysicalDeviceInformation;
4733           unsigned int PhysicalDeviceIndex = Controller->V2.PhysicalDeviceIndex;
4734           DAC960_V2_PhysicalDeviceInfo_T *PhysicalDeviceInfo =
4735             Controller->V2.PhysicalDeviceInformation[PhysicalDeviceIndex];
4736           DAC960_SCSI_Inquiry_UnitSerialNumber_T *InquiryUnitSerialNumber =
4737             Controller->V2.InquiryUnitSerialNumber[PhysicalDeviceIndex];
4738           unsigned int DeviceIndex;
4739           while (PhysicalDeviceInfo != NULL &&
4740                  (NewPhysicalDeviceInfo->Channel >
4741                   PhysicalDeviceInfo->Channel ||
4742                   (NewPhysicalDeviceInfo->Channel ==
4743                    PhysicalDeviceInfo->Channel &&
4744                    (NewPhysicalDeviceInfo->TargetID >
4745                     PhysicalDeviceInfo->TargetID ||
4746                    (NewPhysicalDeviceInfo->TargetID ==
4747                     PhysicalDeviceInfo->TargetID &&
4748                     NewPhysicalDeviceInfo->LogicalUnit >
4749                     PhysicalDeviceInfo->LogicalUnit)))))
4750             {
4751               DAC960_Critical("Physical Device %d:%d No Longer Exists\n",
4752                               Controller,
4753                               PhysicalDeviceInfo->Channel,
4754                               PhysicalDeviceInfo->TargetID);
4755               Controller->V2.PhysicalDeviceInformation
4756                              [PhysicalDeviceIndex] = NULL;
4757               Controller->V2.InquiryUnitSerialNumber
4758                              [PhysicalDeviceIndex] = NULL;
4759               kfree(PhysicalDeviceInfo);
4760               kfree(InquiryUnitSerialNumber);
4761               for (DeviceIndex = PhysicalDeviceIndex;
4762                    DeviceIndex < DAC960_V2_MaxPhysicalDevices - 1;
4763                    DeviceIndex++)
4764                 {
4765                   Controller->V2.PhysicalDeviceInformation[DeviceIndex] =
4766                     Controller->V2.PhysicalDeviceInformation[DeviceIndex+1];
4767                   Controller->V2.InquiryUnitSerialNumber[DeviceIndex] =
4768                     Controller->V2.InquiryUnitSerialNumber[DeviceIndex+1];
4769                 }
4770               Controller->V2.PhysicalDeviceInformation
4771                              [DAC960_V2_MaxPhysicalDevices-1] = NULL;
4772               Controller->V2.InquiryUnitSerialNumber
4773                              [DAC960_V2_MaxPhysicalDevices-1] = NULL;
4774               PhysicalDeviceInfo =
4775                 Controller->V2.PhysicalDeviceInformation[PhysicalDeviceIndex];
4776               InquiryUnitSerialNumber =
4777                 Controller->V2.InquiryUnitSerialNumber[PhysicalDeviceIndex];
4778             }
4779           if (PhysicalDeviceInfo == NULL ||
4780               (NewPhysicalDeviceInfo->Channel !=
4781                PhysicalDeviceInfo->Channel) ||
4782               (NewPhysicalDeviceInfo->TargetID !=
4783                PhysicalDeviceInfo->TargetID) ||
4784               (NewPhysicalDeviceInfo->LogicalUnit !=
4785                PhysicalDeviceInfo->LogicalUnit))
4786             {
4787               PhysicalDeviceInfo =
4788                 kmalloc(sizeof(DAC960_V2_PhysicalDeviceInfo_T), GFP_ATOMIC);
4789               InquiryUnitSerialNumber =
4790                   kmalloc(sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T),
4791                           GFP_ATOMIC);
4792               if (InquiryUnitSerialNumber == NULL ||
4793                   PhysicalDeviceInfo == NULL)
4794                 {
4795                   kfree(InquiryUnitSerialNumber);
4796                   InquiryUnitSerialNumber = NULL;
4797                   kfree(PhysicalDeviceInfo);
4798                   PhysicalDeviceInfo = NULL;
4799                 }
4800               DAC960_Critical("Physical Device %d:%d Now Exists%s\n",
4801                               Controller,
4802                               NewPhysicalDeviceInfo->Channel,
4803                               NewPhysicalDeviceInfo->TargetID,
4804                               (PhysicalDeviceInfo != NULL
4805                                ? "" : " - Allocation Failed"));
4806               if (PhysicalDeviceInfo != NULL)
4807                 {
4808                   memset(PhysicalDeviceInfo, 0,
4809                          sizeof(DAC960_V2_PhysicalDeviceInfo_T));
4810                   PhysicalDeviceInfo->PhysicalDeviceState =
4811                     DAC960_V2_Device_InvalidState;
4812                   memset(InquiryUnitSerialNumber, 0,
4813                          sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T));
4814                   InquiryUnitSerialNumber->PeripheralDeviceType = 0x1F;
4815                   for (DeviceIndex = DAC960_V2_MaxPhysicalDevices - 1;
4816                        DeviceIndex > PhysicalDeviceIndex;
4817                        DeviceIndex--)
4818                     {
4819                       Controller->V2.PhysicalDeviceInformation[DeviceIndex] =
4820                         Controller->V2.PhysicalDeviceInformation[DeviceIndex-1];
4821                       Controller->V2.InquiryUnitSerialNumber[DeviceIndex] =
4822                         Controller->V2.InquiryUnitSerialNumber[DeviceIndex-1];
4823                     }
4824                   Controller->V2.PhysicalDeviceInformation
4825                                  [PhysicalDeviceIndex] =
4826                     PhysicalDeviceInfo;
4827                   Controller->V2.InquiryUnitSerialNumber
4828                                  [PhysicalDeviceIndex] =
4829                     InquiryUnitSerialNumber;
4830                   Controller->V2.NeedDeviceSerialNumberInformation = true;
4831                 }
4832             }
4833           if (PhysicalDeviceInfo != NULL)
4834             {
4835               if (NewPhysicalDeviceInfo->PhysicalDeviceState !=
4836                   PhysicalDeviceInfo->PhysicalDeviceState)
4837                 DAC960_Critical(
4838                   "Physical Device %d:%d is now %s\n", Controller,
4839                   NewPhysicalDeviceInfo->Channel,
4840                   NewPhysicalDeviceInfo->TargetID,
4841                   (NewPhysicalDeviceInfo->PhysicalDeviceState
4842                    == DAC960_V2_Device_Online
4843                    ? "ONLINE"
4844                    : NewPhysicalDeviceInfo->PhysicalDeviceState
4845                      == DAC960_V2_Device_Rebuild
4846                      ? "REBUILD"
4847                      : NewPhysicalDeviceInfo->PhysicalDeviceState
4848                        == DAC960_V2_Device_Missing
4849                        ? "MISSING"
4850                        : NewPhysicalDeviceInfo->PhysicalDeviceState
4851                          == DAC960_V2_Device_Critical
4852                          ? "CRITICAL"
4853                          : NewPhysicalDeviceInfo->PhysicalDeviceState
4854                            == DAC960_V2_Device_Dead
4855                            ? "DEAD"
4856                            : NewPhysicalDeviceInfo->PhysicalDeviceState
4857                              == DAC960_V2_Device_SuspectedDead
4858                              ? "SUSPECTED-DEAD"
4859                              : NewPhysicalDeviceInfo->PhysicalDeviceState
4860                                == DAC960_V2_Device_CommandedOffline
4861                                ? "COMMANDED-OFFLINE"
4862                                : NewPhysicalDeviceInfo->PhysicalDeviceState
4863                                  == DAC960_V2_Device_Standby
4864                                  ? "STANDBY" : "UNKNOWN"));
4865               if ((NewPhysicalDeviceInfo->ParityErrors !=
4866                    PhysicalDeviceInfo->ParityErrors) ||
4867                   (NewPhysicalDeviceInfo->SoftErrors !=
4868                    PhysicalDeviceInfo->SoftErrors) ||
4869                   (NewPhysicalDeviceInfo->HardErrors !=
4870                    PhysicalDeviceInfo->HardErrors) ||
4871                   (NewPhysicalDeviceInfo->MiscellaneousErrors !=
4872                    PhysicalDeviceInfo->MiscellaneousErrors) ||
4873                   (NewPhysicalDeviceInfo->CommandTimeouts !=
4874                    PhysicalDeviceInfo->CommandTimeouts) ||
4875                   (NewPhysicalDeviceInfo->Retries !=
4876                    PhysicalDeviceInfo->Retries) ||
4877                   (NewPhysicalDeviceInfo->Aborts !=
4878                    PhysicalDeviceInfo->Aborts) ||
4879                   (NewPhysicalDeviceInfo->PredictedFailuresDetected !=
4880                    PhysicalDeviceInfo->PredictedFailuresDetected))
4881                 {
4882                   DAC960_Critical("Physical Device %d:%d Errors: "
4883                                   "Parity = %d, Soft = %d, "
4884                                   "Hard = %d, Misc = %d\n",
4885                                   Controller,
4886                                   NewPhysicalDeviceInfo->Channel,
4887                                   NewPhysicalDeviceInfo->TargetID,
4888                                   NewPhysicalDeviceInfo->ParityErrors,
4889                                   NewPhysicalDeviceInfo->SoftErrors,
4890                                   NewPhysicalDeviceInfo->HardErrors,
4891                                   NewPhysicalDeviceInfo->MiscellaneousErrors);
4892                   DAC960_Critical("Physical Device %d:%d Errors: "
4893                                   "Timeouts = %d, Retries = %d, "
4894                                   "Aborts = %d, Predicted = %d\n",
4895                                   Controller,
4896                                   NewPhysicalDeviceInfo->Channel,
4897                                   NewPhysicalDeviceInfo->TargetID,
4898                                   NewPhysicalDeviceInfo->CommandTimeouts,
4899                                   NewPhysicalDeviceInfo->Retries,
4900                                   NewPhysicalDeviceInfo->Aborts,
4901                                   NewPhysicalDeviceInfo
4902                                   ->PredictedFailuresDetected);
4903                 }
4904               if ((PhysicalDeviceInfo->PhysicalDeviceState
4905                    == DAC960_V2_Device_Dead ||
4906                    PhysicalDeviceInfo->PhysicalDeviceState
4907                    == DAC960_V2_Device_InvalidState) &&
4908                   NewPhysicalDeviceInfo->PhysicalDeviceState
4909                   != DAC960_V2_Device_Dead)
4910                 Controller->V2.NeedDeviceSerialNumberInformation = true;
4911               memcpy(PhysicalDeviceInfo, NewPhysicalDeviceInfo,
4912                      sizeof(DAC960_V2_PhysicalDeviceInfo_T));
4913             }
4914           NewPhysicalDeviceInfo->LogicalUnit++;
4915           Controller->V2.PhysicalDeviceIndex++;
4916         }
4917       else if (CommandOpcode == DAC960_V2_GetPhysicalDeviceInfoValid)
4918         {
4919           unsigned int DeviceIndex;
4920           for (DeviceIndex = Controller->V2.PhysicalDeviceIndex;
4921                DeviceIndex < DAC960_V2_MaxPhysicalDevices;
4922                DeviceIndex++)
4923             {
4924               DAC960_V2_PhysicalDeviceInfo_T *PhysicalDeviceInfo =
4925                 Controller->V2.PhysicalDeviceInformation[DeviceIndex];
4926               DAC960_SCSI_Inquiry_UnitSerialNumber_T *InquiryUnitSerialNumber =
4927                 Controller->V2.InquiryUnitSerialNumber[DeviceIndex];
4928               if (PhysicalDeviceInfo == NULL) break;
4929               DAC960_Critical("Physical Device %d:%d No Longer Exists\n",
4930                               Controller,
4931                               PhysicalDeviceInfo->Channel,
4932                               PhysicalDeviceInfo->TargetID);
4933               Controller->V2.PhysicalDeviceInformation[DeviceIndex] = NULL;
4934               Controller->V2.InquiryUnitSerialNumber[DeviceIndex] = NULL;
4935               kfree(PhysicalDeviceInfo);
4936               kfree(InquiryUnitSerialNumber);
4937             }
4938           Controller->V2.NeedPhysicalDeviceInformation = false;
4939         }
4940       else if (CommandOpcode == DAC960_V2_GetLogicalDeviceInfoValid &&
4941                CommandStatus == DAC960_V2_NormalCompletion)
4942         {
4943           DAC960_V2_LogicalDeviceInfo_T *NewLogicalDeviceInfo =
4944             Controller->V2.NewLogicalDeviceInformation;
4945           unsigned short LogicalDeviceNumber =
4946             NewLogicalDeviceInfo->LogicalDeviceNumber;
4947           DAC960_V2_LogicalDeviceInfo_T *LogicalDeviceInfo =
4948             Controller->V2.LogicalDeviceInformation[LogicalDeviceNumber];
4949           if (LogicalDeviceInfo == NULL)
4950             {
4951               DAC960_V2_PhysicalDevice_T PhysicalDevice;
4952               PhysicalDevice.Controller = 0;
4953               PhysicalDevice.Channel = NewLogicalDeviceInfo->Channel;
4954               PhysicalDevice.TargetID = NewLogicalDeviceInfo->TargetID;
4955               PhysicalDevice.LogicalUnit = NewLogicalDeviceInfo->LogicalUnit;
4956               Controller->V2.LogicalDriveToVirtualDevice[LogicalDeviceNumber] =
4957                 PhysicalDevice;
4958               LogicalDeviceInfo = kmalloc(sizeof(DAC960_V2_LogicalDeviceInfo_T),
4959                                           GFP_ATOMIC);
4960               Controller->V2.LogicalDeviceInformation[LogicalDeviceNumber] =
4961                 LogicalDeviceInfo;
4962               DAC960_Critical("Logical Drive %d (/dev/rd/c%dd%d) "
4963                               "Now Exists%s\n", Controller,
4964                               LogicalDeviceNumber,
4965                               Controller->ControllerNumber,
4966                               LogicalDeviceNumber,
4967                               (LogicalDeviceInfo != NULL
4968                                ? "" : " - Allocation Failed"));
4969               if (LogicalDeviceInfo != NULL)
4970                 {
4971                   memset(LogicalDeviceInfo, 0,
4972                          sizeof(DAC960_V2_LogicalDeviceInfo_T));
4973                   DAC960_ComputeGenericDiskInfo(Controller);
4974                 }
4975             }
4976           if (LogicalDeviceInfo != NULL)
4977             {
4978               unsigned long LogicalDeviceSize =
4979                 NewLogicalDeviceInfo->ConfigurableDeviceSize;
4980               if (NewLogicalDeviceInfo->LogicalDeviceState !=
4981                   LogicalDeviceInfo->LogicalDeviceState)
4982                 DAC960_Critical("Logical Drive %d (/dev/rd/c%dd%d) "
4983                                 "is now %s\n", Controller,
4984                                 LogicalDeviceNumber,
4985                                 Controller->ControllerNumber,
4986                                 LogicalDeviceNumber,
4987                                 (NewLogicalDeviceInfo->LogicalDeviceState
4988                                  == DAC960_V2_LogicalDevice_Online
4989                                  ? "ONLINE"
4990                                  : NewLogicalDeviceInfo->LogicalDeviceState
4991                                    == DAC960_V2_LogicalDevice_Critical
4992                                    ? "CRITICAL" : "OFFLINE"));
4993               if ((NewLogicalDeviceInfo->SoftErrors !=
4994                    LogicalDeviceInfo->SoftErrors) ||
4995                   (NewLogicalDeviceInfo->CommandsFailed !=
4996                    LogicalDeviceInfo->CommandsFailed) ||
4997                   (NewLogicalDeviceInfo->DeferredWriteErrors !=
4998                    LogicalDeviceInfo->DeferredWriteErrors))
4999                 DAC960_Critical("Logical Drive %d (/dev/rd/c%dd%d) Errors: "
5000                                 "Soft = %d, Failed = %d, Deferred Write = %d\n",
5001                                 Controller, LogicalDeviceNumber,
5002                                 Controller->ControllerNumber,
5003                                 LogicalDeviceNumber,
5004                                 NewLogicalDeviceInfo->SoftErrors,
5005                                 NewLogicalDeviceInfo->CommandsFailed,
5006                                 NewLogicalDeviceInfo->DeferredWriteErrors);
5007               if (NewLogicalDeviceInfo->ConsistencyCheckInProgress)
5008                 DAC960_V2_ReportProgress(Controller,
5009                                          "Consistency Check",
5010                                          LogicalDeviceNumber,
5011                                          NewLogicalDeviceInfo
5012                                          ->ConsistencyCheckBlockNumber,
5013                                          LogicalDeviceSize);
5014               else if (NewLogicalDeviceInfo->RebuildInProgress)
5015                 DAC960_V2_ReportProgress(Controller,
5016                                          "Rebuild",
5017                                          LogicalDeviceNumber,
5018                                          NewLogicalDeviceInfo
5019                                          ->RebuildBlockNumber,
5020                                          LogicalDeviceSize);
5021               else if (NewLogicalDeviceInfo->BackgroundInitializationInProgress)
5022                 DAC960_V2_ReportProgress(Controller,
5023                                          "Background Initialization",
5024                                          LogicalDeviceNumber,
5025                                          NewLogicalDeviceInfo
5026                                          ->BackgroundInitializationBlockNumber,
5027                                          LogicalDeviceSize);
5028               else if (NewLogicalDeviceInfo->ForegroundInitializationInProgress)
5029                 DAC960_V2_ReportProgress(Controller,
5030                                          "Foreground Initialization",
5031                                          LogicalDeviceNumber,
5032                                          NewLogicalDeviceInfo
5033                                          ->ForegroundInitializationBlockNumber,
5034                                          LogicalDeviceSize);
5035               else if (NewLogicalDeviceInfo->DataMigrationInProgress)
5036                 DAC960_V2_ReportProgress(Controller,
5037                                          "Data Migration",
5038                                          LogicalDeviceNumber,
5039                                          NewLogicalDeviceInfo
5040                                          ->DataMigrationBlockNumber,
5041                                          LogicalDeviceSize);
5042               else if (NewLogicalDeviceInfo->PatrolOperationInProgress)
5043                 DAC960_V2_ReportProgress(Controller,
5044                                          "Patrol Operation",
5045                                          LogicalDeviceNumber,
5046                                          NewLogicalDeviceInfo
5047                                          ->PatrolOperationBlockNumber,
5048                                          LogicalDeviceSize);
5049               if (LogicalDeviceInfo->BackgroundInitializationInProgress &&
5050                   !NewLogicalDeviceInfo->BackgroundInitializationInProgress)
5051                 DAC960_Progress("Logical Drive %d (/dev/rd/c%dd%d) "
5052                                 "Background Initialization %s\n",
5053                                 Controller,
5054                                 LogicalDeviceNumber,
5055                                 Controller->ControllerNumber,
5056                                 LogicalDeviceNumber,
5057                                 (NewLogicalDeviceInfo->LogicalDeviceControl
5058                                                       .LogicalDeviceInitialized
5059                                  ? "Completed" : "Failed"));
5060               memcpy(LogicalDeviceInfo, NewLogicalDeviceInfo,
5061                      sizeof(DAC960_V2_LogicalDeviceInfo_T));
5062             }
5063           Controller->V2.LogicalDriveFoundDuringScan
5064                          [LogicalDeviceNumber] = true;
5065           NewLogicalDeviceInfo->LogicalDeviceNumber++;
5066         }
5067       else if (CommandOpcode == DAC960_V2_GetLogicalDeviceInfoValid)
5068         {
5069           int LogicalDriveNumber;
5070           for (LogicalDriveNumber = 0;
5071                LogicalDriveNumber < DAC960_MaxLogicalDrives;
5072                LogicalDriveNumber++)
5073             {
5074               DAC960_V2_LogicalDeviceInfo_T *LogicalDeviceInfo =
5075                 Controller->V2.LogicalDeviceInformation[LogicalDriveNumber];
5076               if (LogicalDeviceInfo == NULL ||
5077                   Controller->V2.LogicalDriveFoundDuringScan
5078                                  [LogicalDriveNumber])
5079                 continue;
5080               DAC960_Critical("Logical Drive %d (/dev/rd/c%dd%d) "
5081                               "No Longer Exists\n", Controller,
5082                               LogicalDriveNumber,
5083                               Controller->ControllerNumber,
5084                               LogicalDriveNumber);
5085               Controller->V2.LogicalDeviceInformation
5086                              [LogicalDriveNumber] = NULL;
5087               kfree(LogicalDeviceInfo);
5088               Controller->LogicalDriveInitiallyAccessible
5089                           [LogicalDriveNumber] = false;
5090               DAC960_ComputeGenericDiskInfo(Controller);
5091             }
5092           Controller->V2.NeedLogicalDeviceInformation = false;
5093         }
5094       else if (CommandOpcode == DAC960_V2_SCSI_10_Passthru)
5095         {
5096             DAC960_SCSI_Inquiry_UnitSerialNumber_T *InquiryUnitSerialNumber =
5097                 Controller->V2.InquiryUnitSerialNumber[Controller->V2.PhysicalDeviceIndex - 1];
5098
5099             if (CommandStatus != DAC960_V2_NormalCompletion) {
5100                 memset(InquiryUnitSerialNumber,
5101                         0, sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T));
5102                 InquiryUnitSerialNumber->PeripheralDeviceType = 0x1F;
5103             } else
5104                 memcpy(InquiryUnitSerialNumber,
5105                         Controller->V2.NewInquiryUnitSerialNumber,
5106                         sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T));
5107
5108              Controller->V2.NeedDeviceSerialNumberInformation = false;
5109         }
5110
5111       if (Controller->V2.HealthStatusBuffer->NextEventSequenceNumber
5112           - Controller->V2.NextEventSequenceNumber > 0)
5113         {
5114           CommandMailbox->GetEvent.CommandOpcode = DAC960_V2_IOCTL;
5115           CommandMailbox->GetEvent.DataTransferSize = sizeof(DAC960_V2_Event_T);
5116           CommandMailbox->GetEvent.EventSequenceNumberHigh16 =
5117             Controller->V2.NextEventSequenceNumber >> 16;
5118           CommandMailbox->GetEvent.ControllerNumber = 0;
5119           CommandMailbox->GetEvent.IOCTL_Opcode =
5120             DAC960_V2_GetEvent;
5121           CommandMailbox->GetEvent.EventSequenceNumberLow16 =
5122             Controller->V2.NextEventSequenceNumber & 0xFFFF;
5123           CommandMailbox->GetEvent.DataTransferMemoryAddress
5124                                   .ScatterGatherSegments[0]
5125                                   .SegmentDataPointer =
5126             Controller->V2.EventDMA;
5127           CommandMailbox->GetEvent.DataTransferMemoryAddress
5128                                   .ScatterGatherSegments[0]
5129                                   .SegmentByteCount =
5130             CommandMailbox->GetEvent.DataTransferSize;
5131           DAC960_QueueCommand(Command);
5132           return;
5133         }
5134       if (Controller->V2.NeedPhysicalDeviceInformation)
5135         {
5136           if (Controller->V2.NeedDeviceSerialNumberInformation)
5137             {
5138               DAC960_SCSI_Inquiry_UnitSerialNumber_T *InquiryUnitSerialNumber =
5139                 Controller->V2.NewInquiryUnitSerialNumber;
5140               InquiryUnitSerialNumber->PeripheralDeviceType = 0x1F;
5141
5142               DAC960_V2_ConstructNewUnitSerialNumber(Controller, CommandMailbox,
5143                         Controller->V2.NewPhysicalDeviceInformation->Channel,
5144                         Controller->V2.NewPhysicalDeviceInformation->TargetID,
5145                 Controller->V2.NewPhysicalDeviceInformation->LogicalUnit - 1);
5146
5147
5148               DAC960_QueueCommand(Command);
5149               return;
5150             }
5151           if (Controller->V2.StartPhysicalDeviceInformationScan)
5152             {
5153               Controller->V2.PhysicalDeviceIndex = 0;
5154               Controller->V2.NewPhysicalDeviceInformation->Channel = 0;
5155               Controller->V2.NewPhysicalDeviceInformation->TargetID = 0;
5156               Controller->V2.NewPhysicalDeviceInformation->LogicalUnit = 0;
5157               Controller->V2.StartPhysicalDeviceInformationScan = false;
5158             }
5159           CommandMailbox->PhysicalDeviceInfo.CommandOpcode = DAC960_V2_IOCTL;
5160           CommandMailbox->PhysicalDeviceInfo.DataTransferSize =
5161             sizeof(DAC960_V2_PhysicalDeviceInfo_T);
5162           CommandMailbox->PhysicalDeviceInfo.PhysicalDevice.LogicalUnit =
5163             Controller->V2.NewPhysicalDeviceInformation->LogicalUnit;
5164           CommandMailbox->PhysicalDeviceInfo.PhysicalDevice.TargetID =
5165             Controller->V2.NewPhysicalDeviceInformation->TargetID;
5166           CommandMailbox->PhysicalDeviceInfo.PhysicalDevice.Channel =
5167             Controller->V2.NewPhysicalDeviceInformation->Channel;
5168           CommandMailbox->PhysicalDeviceInfo.IOCTL_Opcode =
5169             DAC960_V2_GetPhysicalDeviceInfoValid;
5170           CommandMailbox->PhysicalDeviceInfo.DataTransferMemoryAddress
5171                                             .ScatterGatherSegments[0]
5172                                             .SegmentDataPointer =
5173             Controller->V2.NewPhysicalDeviceInformationDMA;
5174           CommandMailbox->PhysicalDeviceInfo.DataTransferMemoryAddress
5175                                             .ScatterGatherSegments[0]
5176                                             .SegmentByteCount =
5177             CommandMailbox->PhysicalDeviceInfo.DataTransferSize;
5178           DAC960_QueueCommand(Command);
5179           return;
5180         }
5181       if (Controller->V2.NeedLogicalDeviceInformation)
5182         {
5183           if (Controller->V2.StartLogicalDeviceInformationScan)
5184             {
5185               int LogicalDriveNumber;
5186               for (LogicalDriveNumber = 0;
5187                    LogicalDriveNumber < DAC960_MaxLogicalDrives;
5188                    LogicalDriveNumber++)
5189                 Controller->V2.LogicalDriveFoundDuringScan
5190                                [LogicalDriveNumber] = false;
5191               Controller->V2.NewLogicalDeviceInformation->LogicalDeviceNumber = 0;
5192               Controller->V2.StartLogicalDeviceInformationScan = false;
5193             }
5194           CommandMailbox->LogicalDeviceInfo.CommandOpcode = DAC960_V2_IOCTL;
5195           CommandMailbox->LogicalDeviceInfo.DataTransferSize =
5196             sizeof(DAC960_V2_LogicalDeviceInfo_T);
5197           CommandMailbox->LogicalDeviceInfo.LogicalDevice.LogicalDeviceNumber =
5198             Controller->V2.NewLogicalDeviceInformation->LogicalDeviceNumber;
5199           CommandMailbox->LogicalDeviceInfo.IOCTL_Opcode =
5200             DAC960_V2_GetLogicalDeviceInfoValid;
5201           CommandMailbox->LogicalDeviceInfo.DataTransferMemoryAddress
5202                                            .ScatterGatherSegments[0]
5203                                            .SegmentDataPointer =
5204             Controller->V2.NewLogicalDeviceInformationDMA;
5205           CommandMailbox->LogicalDeviceInfo.DataTransferMemoryAddress
5206                                            .ScatterGatherSegments[0]
5207                                            .SegmentByteCount =
5208             CommandMailbox->LogicalDeviceInfo.DataTransferSize;
5209           DAC960_QueueCommand(Command);
5210           return;
5211         }
5212       Controller->MonitoringTimerCount++;
5213       Controller->MonitoringTimer.expires =
5214         jiffies + DAC960_HealthStatusMonitoringInterval;
5215         add_timer(&Controller->MonitoringTimer);
5216     }
5217   if (CommandType == DAC960_ImmediateCommand)
5218     {
5219       complete(Command->Completion);
5220       Command->Completion = NULL;
5221       return;
5222     }
5223   if (CommandType == DAC960_QueuedCommand)
5224     {
5225       DAC960_V2_KernelCommand_T *KernelCommand = Command->V2.KernelCommand;
5226       KernelCommand->CommandStatus = CommandStatus;
5227       KernelCommand->RequestSenseLength = Command->V2.RequestSenseLength;
5228       KernelCommand->DataTransferLength = Command->V2.DataTransferResidue;
5229       Command->V2.KernelCommand = NULL;
5230       DAC960_DeallocateCommand(Command);
5231       KernelCommand->CompletionFunction(KernelCommand);
5232       return;
5233     }
5234   /*
5235     Queue a Status Monitoring Command to the Controller using the just
5236     completed Command if one was deferred previously due to lack of a
5237     free Command when the Monitoring Timer Function was called.
5238   */
5239   if (Controller->MonitoringCommandDeferred)
5240     {
5241       Controller->MonitoringCommandDeferred = false;
5242       DAC960_V2_QueueMonitoringCommand(Command);
5243       return;
5244     }
5245   /*
5246     Deallocate the Command.
5247   */
5248   DAC960_DeallocateCommand(Command);
5249   /*
5250     Wake up any processes waiting on a free Command.
5251   */
5252   wake_up(&Controller->CommandWaitQueue);
5253 }
5254
5255 /*
5256   DAC960_GEM_InterruptHandler handles hardware interrupts from DAC960 GEM Series
5257   Controllers.
5258 */
5259
5260 static irqreturn_t DAC960_GEM_InterruptHandler(int IRQ_Channel,
5261                                        void *DeviceIdentifier)
5262 {
5263   DAC960_Controller_T *Controller = DeviceIdentifier;
5264   void __iomem *ControllerBaseAddress = Controller->BaseAddress;
5265   DAC960_V2_StatusMailbox_T *NextStatusMailbox;
5266   unsigned long flags;
5267
5268   spin_lock_irqsave(&Controller->queue_lock, flags);
5269   DAC960_GEM_AcknowledgeInterrupt(ControllerBaseAddress);
5270   NextStatusMailbox = Controller->V2.NextStatusMailbox;
5271   while (NextStatusMailbox->Fields.CommandIdentifier > 0)
5272     {
5273        DAC960_V2_CommandIdentifier_T CommandIdentifier =
5274            NextStatusMailbox->Fields.CommandIdentifier;
5275        DAC960_Command_T *Command = Controller->Commands[CommandIdentifier-1];
5276        Command->V2.CommandStatus = NextStatusMailbox->Fields.CommandStatus;
5277        Command->V2.RequestSenseLength =
5278            NextStatusMailbox->Fields.RequestSenseLength;
5279        Command->V2.DataTransferResidue =
5280            NextStatusMailbox->Fields.DataTransferResidue;
5281        NextStatusMailbox->Words[0] = 0;
5282        if (++NextStatusMailbox > Controller->V2.LastStatusMailbox)
5283            NextStatusMailbox = Controller->V2.FirstStatusMailbox;
5284        DAC960_V2_ProcessCompletedCommand(Command);
5285     }
5286   Controller->V2.NextStatusMailbox = NextStatusMailbox;
5287   /*
5288     Attempt to remove additional I/O Requests from the Controller's
5289     I/O Request Queue and queue them to the Controller.
5290   */
5291   DAC960_ProcessRequest(Controller);
5292   spin_unlock_irqrestore(&Controller->queue_lock, flags);
5293   return IRQ_HANDLED;
5294 }
5295
5296 /*
5297   DAC960_BA_InterruptHandler handles hardware interrupts from DAC960 BA Series
5298   Controllers.
5299 */
5300
5301 static irqreturn_t DAC960_BA_InterruptHandler(int IRQ_Channel,
5302                                        void *DeviceIdentifier)
5303 {
5304   DAC960_Controller_T *Controller = DeviceIdentifier;
5305   void __iomem *ControllerBaseAddress = Controller->BaseAddress;
5306   DAC960_V2_StatusMailbox_T *NextStatusMailbox;
5307   unsigned long flags;
5308
5309   spin_lock_irqsave(&Controller->queue_lock, flags);
5310   DAC960_BA_AcknowledgeInterrupt(ControllerBaseAddress);
5311   NextStatusMailbox = Controller->V2.NextStatusMailbox;
5312   while (NextStatusMailbox->Fields.CommandIdentifier > 0)
5313     {
5314       DAC960_V2_CommandIdentifier_T CommandIdentifier =
5315         NextStatusMailbox->Fields.CommandIdentifier;
5316       DAC960_Command_T *Command = Controller->Commands[CommandIdentifier-1];
5317       Command->V2.CommandStatus = NextStatusMailbox->Fields.CommandStatus;
5318       Command->V2.RequestSenseLength =
5319         NextStatusMailbox->Fields.RequestSenseLength;
5320       Command->V2.DataTransferResidue =
5321         NextStatusMailbox->Fields.DataTransferResidue;
5322       NextStatusMailbox->Words[0] = 0;
5323       if (++NextStatusMailbox > Controller->V2.LastStatusMailbox)
5324         NextStatusMailbox = Controller->V2.FirstStatusMailbox;
5325       DAC960_V2_ProcessCompletedCommand(Command);
5326     }
5327   Controller->V2.NextStatusMailbox = NextStatusMailbox;
5328   /*
5329     Attempt to remove additional I/O Requests from the Controller's
5330     I/O Request Queue and queue them to the Controller.
5331   */
5332   DAC960_ProcessRequest(Controller);
5333   spin_unlock_irqrestore(&Controller->queue_lock, flags);
5334   return IRQ_HANDLED;
5335 }
5336
5337
5338 /*
5339   DAC960_LP_InterruptHandler handles hardware interrupts from DAC960 LP Series
5340   Controllers.
5341 */
5342
5343 static irqreturn_t DAC960_LP_InterruptHandler(int IRQ_Channel,
5344                                        void *DeviceIdentifier)
5345 {
5346   DAC960_Controller_T *Controller = DeviceIdentifier;
5347   void __iomem *ControllerBaseAddress = Controller->BaseAddress;
5348   DAC960_V2_StatusMailbox_T *NextStatusMailbox;
5349   unsigned long flags;
5350
5351   spin_lock_irqsave(&Controller->queue_lock, flags);
5352   DAC960_LP_AcknowledgeInterrupt(ControllerBaseAddress);
5353   NextStatusMailbox = Controller->V2.NextStatusMailbox;
5354   while (NextStatusMailbox->Fields.CommandIdentifier > 0)
5355     {
5356       DAC960_V2_CommandIdentifier_T CommandIdentifier =
5357         NextStatusMailbox->Fields.CommandIdentifier;
5358       DAC960_Command_T *Command = Controller->Commands[CommandIdentifier-1];
5359       Command->V2.CommandStatus = NextStatusMailbox->Fields.CommandStatus;
5360       Command->V2.RequestSenseLength =
5361         NextStatusMailbox->Fields.RequestSenseLength;
5362       Command->V2.DataTransferResidue =
5363         NextStatusMailbox->Fields.DataTransferResidue;
5364       NextStatusMailbox->Words[0] = 0;
5365       if (++NextStatusMailbox > Controller->V2.LastStatusMailbox)
5366         NextStatusMailbox = Controller->V2.FirstStatusMailbox;
5367       DAC960_V2_ProcessCompletedCommand(Command);
5368     }
5369   Controller->V2.NextStatusMailbox = NextStatusMailbox;
5370   /*
5371     Attempt to remove additional I/O Requests from the Controller's
5372     I/O Request Queue and queue them to the Controller.
5373   */
5374   DAC960_ProcessRequest(Controller);
5375   spin_unlock_irqrestore(&Controller->queue_lock, flags);
5376   return IRQ_HANDLED;
5377 }
5378
5379
5380 /*
5381   DAC960_LA_InterruptHandler handles hardware interrupts from DAC960 LA Series
5382   Controllers.
5383 */
5384
5385 static irqreturn_t DAC960_LA_InterruptHandler(int IRQ_Channel,
5386                                        void *DeviceIdentifier)
5387 {
5388   DAC960_Controller_T *Controller = DeviceIdentifier;
5389   void __iomem *ControllerBaseAddress = Controller->BaseAddress;
5390   DAC960_V1_StatusMailbox_T *NextStatusMailbox;
5391   unsigned long flags;
5392
5393   spin_lock_irqsave(&Controller->queue_lock, flags);
5394   DAC960_LA_AcknowledgeInterrupt(ControllerBaseAddress);
5395   NextStatusMailbox = Controller->V1.NextStatusMailbox;
5396   while (NextStatusMailbox->Fields.Valid)
5397     {
5398       DAC960_V1_CommandIdentifier_T CommandIdentifier =
5399         NextStatusMailbox->Fields.CommandIdentifier;
5400       DAC960_Command_T *Command = Controller->Commands[CommandIdentifier-1];
5401       Command->V1.CommandStatus = NextStatusMailbox->Fields.CommandStatus;
5402       NextStatusMailbox->Word = 0;
5403       if (++NextStatusMailbox > Controller->V1.LastStatusMailbox)
5404         NextStatusMailbox = Controller->V1.FirstStatusMailbox;
5405       DAC960_V1_ProcessCompletedCommand(Command);
5406     }
5407   Controller->V1.NextStatusMailbox = NextStatusMailbox;
5408   /*
5409     Attempt to remove additional I/O Requests from the Controller's
5410     I/O Request Queue and queue them to the Controller.
5411   */
5412   DAC960_ProcessRequest(Controller);
5413   spin_unlock_irqrestore(&Controller->queue_lock, flags);
5414   return IRQ_HANDLED;
5415 }
5416
5417
5418 /*
5419   DAC960_PG_InterruptHandler handles hardware interrupts from DAC960 PG Series
5420   Controllers.
5421 */
5422
5423 static irqreturn_t DAC960_PG_InterruptHandler(int IRQ_Channel,
5424                                        void *DeviceIdentifier)
5425 {
5426   DAC960_Controller_T *Controller = DeviceIdentifier;
5427   void __iomem *ControllerBaseAddress = Controller->BaseAddress;
5428   DAC960_V1_StatusMailbox_T *NextStatusMailbox;
5429   unsigned long flags;
5430
5431   spin_lock_irqsave(&Controller->queue_lock, flags);
5432   DAC960_PG_AcknowledgeInterrupt(ControllerBaseAddress);
5433   NextStatusMailbox = Controller->V1.NextStatusMailbox;
5434   while (NextStatusMailbox->Fields.Valid)
5435     {
5436       DAC960_V1_CommandIdentifier_T CommandIdentifier =
5437         NextStatusMailbox->Fields.CommandIdentifier;
5438       DAC960_Command_T *Command = Controller->Commands[CommandIdentifier-1];
5439       Command->V1.CommandStatus = NextStatusMailbox->Fields.CommandStatus;
5440       NextStatusMailbox->Word = 0;
5441       if (++NextStatusMailbox > Controller->V1.LastStatusMailbox)
5442         NextStatusMailbox = Controller->V1.FirstStatusMailbox;
5443       DAC960_V1_ProcessCompletedCommand(Command);
5444     }
5445   Controller->V1.NextStatusMailbox = NextStatusMailbox;
5446   /*
5447     Attempt to remove additional I/O Requests from the Controller's
5448     I/O Request Queue and queue them to the Controller.
5449   */
5450   DAC960_ProcessRequest(Controller);
5451   spin_unlock_irqrestore(&Controller->queue_lock, flags);
5452   return IRQ_HANDLED;
5453 }
5454
5455
5456 /*
5457   DAC960_PD_InterruptHandler handles hardware interrupts from DAC960 PD Series
5458   Controllers.
5459 */
5460
5461 static irqreturn_t DAC960_PD_InterruptHandler(int IRQ_Channel,
5462                                        void *DeviceIdentifier)
5463 {
5464   DAC960_Controller_T *Controller = DeviceIdentifier;
5465   void __iomem *ControllerBaseAddress = Controller->BaseAddress;
5466   unsigned long flags;
5467
5468   spin_lock_irqsave(&Controller->queue_lock, flags);
5469   while (DAC960_PD_StatusAvailableP(ControllerBaseAddress))
5470     {
5471       DAC960_V1_CommandIdentifier_T CommandIdentifier =
5472         DAC960_PD_ReadStatusCommandIdentifier(ControllerBaseAddress);
5473       DAC960_Command_T *Command = Controller->Commands[CommandIdentifier-1];
5474       Command->V1.CommandStatus =
5475         DAC960_PD_ReadStatusRegister(ControllerBaseAddress);
5476       DAC960_PD_AcknowledgeInterrupt(ControllerBaseAddress);
5477       DAC960_PD_AcknowledgeStatus(ControllerBaseAddress);
5478       DAC960_V1_ProcessCompletedCommand(Command);
5479     }
5480   /*
5481     Attempt to remove additional I/O Requests from the Controller's
5482     I/O Request Queue and queue them to the Controller.
5483   */
5484   DAC960_ProcessRequest(Controller);
5485   spin_unlock_irqrestore(&Controller->queue_lock, flags);
5486   return IRQ_HANDLED;
5487 }
5488
5489
5490 /*
5491   DAC960_P_InterruptHandler handles hardware interrupts from DAC960 P Series
5492   Controllers.
5493
5494   Translations of DAC960_V1_Enquiry and DAC960_V1_GetDeviceState rely
5495   on the data having been placed into DAC960_Controller_T, rather than
5496   an arbitrary buffer.
5497 */
5498
5499 static irqreturn_t DAC960_P_InterruptHandler(int IRQ_Channel,
5500                                       void *DeviceIdentifier)
5501 {
5502   DAC960_Controller_T *Controller = DeviceIdentifier;
5503   void __iomem *ControllerBaseAddress = Controller->BaseAddress;
5504   unsigned long flags;
5505
5506   spin_lock_irqsave(&Controller->queue_lock, flags);
5507   while (DAC960_PD_StatusAvailableP(ControllerBaseAddress))
5508     {
5509       DAC960_V1_CommandIdentifier_T CommandIdentifier =
5510         DAC960_PD_ReadStatusCommandIdentifier(ControllerBaseAddress);
5511       DAC960_Command_T *Command = Controller->Commands[CommandIdentifier-1];
5512       DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
5513       DAC960_V1_CommandOpcode_T CommandOpcode =
5514         CommandMailbox->Common.CommandOpcode;
5515       Command->V1.CommandStatus =
5516         DAC960_PD_ReadStatusRegister(ControllerBaseAddress);
5517       DAC960_PD_AcknowledgeInterrupt(ControllerBaseAddress);
5518       DAC960_PD_AcknowledgeStatus(ControllerBaseAddress);
5519       switch (CommandOpcode)
5520         {
5521         case DAC960_V1_Enquiry_Old:
5522           Command->V1.CommandMailbox.Common.CommandOpcode = DAC960_V1_Enquiry;
5523           DAC960_P_To_PD_TranslateEnquiry(Controller->V1.NewEnquiry);
5524           break;
5525         case DAC960_V1_GetDeviceState_Old:
5526           Command->V1.CommandMailbox.Common.CommandOpcode =
5527                                                 DAC960_V1_GetDeviceState;
5528           DAC960_P_To_PD_TranslateDeviceState(Controller->V1.NewDeviceState);
5529           break;
5530         case DAC960_V1_Read_Old:
5531           Command->V1.CommandMailbox.Common.CommandOpcode = DAC960_V1_Read;
5532           DAC960_P_To_PD_TranslateReadWriteCommand(CommandMailbox);
5533           break;
5534         case DAC960_V1_Write_Old:
5535           Command->V1.CommandMailbox.Common.CommandOpcode = DAC960_V1_Write;
5536           DAC960_P_To_PD_TranslateReadWriteCommand(CommandMailbox);
5537           break;
5538         case DAC960_V1_ReadWithScatterGather_Old:
5539           Command->V1.CommandMailbox.Common.CommandOpcode =
5540             DAC960_V1_ReadWithScatterGather;
5541           DAC960_P_To_PD_TranslateReadWriteCommand(CommandMailbox);
5542           break;
5543         case DAC960_V1_WriteWithScatterGather_Old:
5544           Command->V1.CommandMailbox.Common.CommandOpcode =
5545             DAC960_V1_WriteWithScatterGather;
5546           DAC960_P_To_PD_TranslateReadWriteCommand(CommandMailbox);
5547           break;
5548         default:
5549           break;
5550         }
5551       DAC960_V1_ProcessCompletedCommand(Command);
5552     }
5553   /*
5554     Attempt to remove additional I/O Requests from the Controller's
5555     I/O Request Queue and queue them to the Controller.
5556   */
5557   DAC960_ProcessRequest(Controller);
5558   spin_unlock_irqrestore(&Controller->queue_lock, flags);
5559   return IRQ_HANDLED;
5560 }
5561
5562
5563 /*
5564   DAC960_V1_QueueMonitoringCommand queues a Monitoring Command to DAC960 V1
5565   Firmware Controllers.
5566 */
5567
5568 static void DAC960_V1_QueueMonitoringCommand(DAC960_Command_T *Command)
5569 {
5570   DAC960_Controller_T *Controller = Command->Controller;
5571   DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
5572   DAC960_V1_ClearCommand(Command);
5573   Command->CommandType = DAC960_MonitoringCommand;
5574   CommandMailbox->Type3.CommandOpcode = DAC960_V1_Enquiry;
5575   CommandMailbox->Type3.BusAddress = Controller->V1.NewEnquiryDMA;
5576   DAC960_QueueCommand(Command);
5577 }
5578
5579
5580 /*
5581   DAC960_V2_QueueMonitoringCommand queues a Monitoring Command to DAC960 V2
5582   Firmware Controllers.
5583 */
5584
5585 static void DAC960_V2_QueueMonitoringCommand(DAC960_Command_T *Command)
5586 {
5587   DAC960_Controller_T *Controller = Command->Controller;
5588   DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox;
5589   DAC960_V2_ClearCommand(Command);
5590   Command->CommandType = DAC960_MonitoringCommand;
5591   CommandMailbox->ControllerInfo.CommandOpcode = DAC960_V2_IOCTL;
5592   CommandMailbox->ControllerInfo.CommandControlBits
5593                                 .DataTransferControllerToHost = true;
5594   CommandMailbox->ControllerInfo.CommandControlBits
5595                                 .NoAutoRequestSense = true;
5596   CommandMailbox->ControllerInfo.DataTransferSize =
5597     sizeof(DAC960_V2_ControllerInfo_T);
5598   CommandMailbox->ControllerInfo.ControllerNumber = 0;
5599   CommandMailbox->ControllerInfo.IOCTL_Opcode = DAC960_V2_GetControllerInfo;
5600   CommandMailbox->ControllerInfo.DataTransferMemoryAddress
5601                                 .ScatterGatherSegments[0]
5602                                 .SegmentDataPointer =
5603     Controller->V2.NewControllerInformationDMA;
5604   CommandMailbox->ControllerInfo.DataTransferMemoryAddress
5605                                 .ScatterGatherSegments[0]
5606                                 .SegmentByteCount =
5607     CommandMailbox->ControllerInfo.DataTransferSize;
5608   DAC960_QueueCommand(Command);
5609 }
5610
5611
5612 /*
5613   DAC960_MonitoringTimerFunction is the timer function for monitoring
5614   the status of DAC960 Controllers.
5615 */
5616
5617 static void DAC960_MonitoringTimerFunction(unsigned long TimerData)
5618 {
5619   DAC960_Controller_T *Controller = (DAC960_Controller_T *) TimerData;
5620   DAC960_Command_T *Command;
5621   unsigned long flags;
5622
5623   if (Controller->FirmwareType == DAC960_V1_Controller)
5624     {
5625       spin_lock_irqsave(&Controller->queue_lock, flags);
5626       /*
5627         Queue a Status Monitoring Command to Controller.
5628       */
5629       Command = DAC960_AllocateCommand(Controller);
5630       if (Command != NULL)
5631         DAC960_V1_QueueMonitoringCommand(Command);
5632       else Controller->MonitoringCommandDeferred = true;
5633       spin_unlock_irqrestore(&Controller->queue_lock, flags);
5634     }
5635   else
5636     {
5637       DAC960_V2_ControllerInfo_T *ControllerInfo =
5638         &Controller->V2.ControllerInformation;
5639       unsigned int StatusChangeCounter =
5640         Controller->V2.HealthStatusBuffer->StatusChangeCounter;
5641       bool ForceMonitoringCommand = false;
5642       if (time_after(jiffies, Controller->SecondaryMonitoringTime
5643           + DAC960_SecondaryMonitoringInterval))
5644         {
5645           int LogicalDriveNumber;
5646           for (LogicalDriveNumber = 0;
5647                LogicalDriveNumber < DAC960_MaxLogicalDrives;
5648                LogicalDriveNumber++)
5649             {
5650               DAC960_V2_LogicalDeviceInfo_T *LogicalDeviceInfo =
5651                 Controller->V2.LogicalDeviceInformation[LogicalDriveNumber];
5652               if (LogicalDeviceInfo == NULL) continue;
5653               if (!LogicalDeviceInfo->LogicalDeviceControl
5654                                      .LogicalDeviceInitialized)
5655                 {
5656                   ForceMonitoringCommand = true;
5657                   break;
5658                 }
5659             }
5660           Controller->SecondaryMonitoringTime = jiffies;
5661         }
5662       if (StatusChangeCounter == Controller->V2.StatusChangeCounter &&
5663           Controller->V2.HealthStatusBuffer->NextEventSequenceNumber
5664           == Controller->V2.NextEventSequenceNumber &&
5665           (ControllerInfo->BackgroundInitializationsActive +
5666            ControllerInfo->LogicalDeviceInitializationsActive +
5667            ControllerInfo->PhysicalDeviceInitializationsActive +
5668            ControllerInfo->ConsistencyChecksActive +
5669            ControllerInfo->RebuildsActive +
5670            ControllerInfo->OnlineExpansionsActive == 0 ||
5671            time_before(jiffies, Controller->PrimaryMonitoringTime
5672            + DAC960_MonitoringTimerInterval)) &&
5673           !ForceMonitoringCommand)
5674         {
5675           Controller->MonitoringTimer.expires =
5676             jiffies + DAC960_HealthStatusMonitoringInterval;
5677             add_timer(&Controller->MonitoringTimer);
5678           return;
5679         }
5680       Controller->V2.StatusChangeCounter = StatusChangeCounter;
5681       Controller->PrimaryMonitoringTime = jiffies;
5682
5683       spin_lock_irqsave(&Controller->queue_lock, flags);
5684       /*
5685         Queue a Status Monitoring Command to Controller.
5686       */
5687       Command = DAC960_AllocateCommand(Controller);
5688       if (Command != NULL)
5689         DAC960_V2_QueueMonitoringCommand(Command);
5690       else Controller->MonitoringCommandDeferred = true;
5691       spin_unlock_irqrestore(&Controller->queue_lock, flags);
5692       /*
5693         Wake up any processes waiting on a Health Status Buffer change.
5694       */
5695       wake_up(&Controller->HealthStatusWaitQueue);
5696     }
5697 }
5698
5699 /*
5700   DAC960_CheckStatusBuffer verifies that there is room to hold ByteCount
5701   additional bytes in the Combined Status Buffer and grows the buffer if
5702   necessary.  It returns true if there is enough room and false otherwise.
5703 */
5704
5705 static bool DAC960_CheckStatusBuffer(DAC960_Controller_T *Controller,
5706                                         unsigned int ByteCount)
5707 {
5708   unsigned char *NewStatusBuffer;
5709   if (Controller->InitialStatusLength + 1 +
5710       Controller->CurrentStatusLength + ByteCount + 1 <=
5711       Controller->CombinedStatusBufferLength)
5712     return true;
5713   if (Controller->CombinedStatusBufferLength == 0)
5714     {
5715       unsigned int NewStatusBufferLength = DAC960_InitialStatusBufferSize;
5716       while (NewStatusBufferLength < ByteCount)
5717         NewStatusBufferLength *= 2;
5718       Controller->CombinedStatusBuffer = kmalloc(NewStatusBufferLength,
5719                                                   GFP_ATOMIC);
5720       if (Controller->CombinedStatusBuffer == NULL) return false;
5721       Controller->CombinedStatusBufferLength = NewStatusBufferLength;
5722       return true;
5723     }
5724   NewStatusBuffer = kmalloc(2 * Controller->CombinedStatusBufferLength,
5725                              GFP_ATOMIC);
5726   if (NewStatusBuffer == NULL)
5727     {
5728       DAC960_Warning("Unable to expand Combined Status Buffer - Truncating\n",
5729                      Controller);
5730       return false;
5731     }
5732   memcpy(NewStatusBuffer, Controller->CombinedStatusBuffer,
5733          Controller->CombinedStatusBufferLength);
5734   kfree(Controller->CombinedStatusBuffer);
5735   Controller->CombinedStatusBuffer = NewStatusBuffer;
5736   Controller->CombinedStatusBufferLength *= 2;
5737   Controller->CurrentStatusBuffer =
5738     &NewStatusBuffer[Controller->InitialStatusLength + 1];
5739   return true;
5740 }
5741
5742
5743 /*
5744   DAC960_Message prints Driver Messages.
5745 */
5746
5747 static void DAC960_Message(DAC960_MessageLevel_T MessageLevel,
5748                            unsigned char *Format,
5749                            DAC960_Controller_T *Controller,
5750                            ...)
5751 {
5752   static unsigned char Buffer[DAC960_LineBufferSize];
5753   static bool BeginningOfLine = true;
5754   va_list Arguments;
5755   int Length = 0;
5756   va_start(Arguments, Controller);
5757   Length = vsprintf(Buffer, Format, Arguments);
5758   va_end(Arguments);
5759   if (Controller == NULL)
5760     printk("%sDAC960#%d: %s", DAC960_MessageLevelMap[MessageLevel],
5761            DAC960_ControllerCount, Buffer);
5762   else if (MessageLevel == DAC960_AnnounceLevel ||
5763            MessageLevel == DAC960_InfoLevel)
5764     {
5765       if (!Controller->ControllerInitialized)
5766         {
5767           if (DAC960_CheckStatusBuffer(Controller, Length))
5768             {
5769               strcpy(&Controller->CombinedStatusBuffer
5770                                   [Controller->InitialStatusLength],
5771                      Buffer);
5772               Controller->InitialStatusLength += Length;
5773               Controller->CurrentStatusBuffer =
5774                 &Controller->CombinedStatusBuffer
5775                              [Controller->InitialStatusLength + 1];
5776             }
5777           if (MessageLevel == DAC960_AnnounceLevel)
5778             {
5779               static int AnnouncementLines = 0;
5780               if (++AnnouncementLines <= 2)
5781                 printk("%sDAC960: %s", DAC960_MessageLevelMap[MessageLevel],
5782                        Buffer);
5783             }
5784           else
5785             {
5786               if (BeginningOfLine)
5787                 {
5788                   if (Buffer[0] != '\n' || Length > 1)
5789                     printk("%sDAC960#%d: %s",
5790                            DAC960_MessageLevelMap[MessageLevel],
5791                            Controller->ControllerNumber, Buffer);
5792                 }
5793               else printk("%s", Buffer);
5794             }
5795         }
5796       else if (DAC960_CheckStatusBuffer(Controller, Length))
5797         {
5798           strcpy(&Controller->CurrentStatusBuffer[
5799                     Controller->CurrentStatusLength], Buffer);
5800           Controller->CurrentStatusLength += Length;
5801         }
5802     }
5803   else if (MessageLevel == DAC960_ProgressLevel)
5804     {
5805       strcpy(Controller->ProgressBuffer, Buffer);
5806       Controller->ProgressBufferLength = Length;
5807       if (Controller->EphemeralProgressMessage)
5808         {
5809           if (time_after_eq(jiffies, Controller->LastProgressReportTime
5810               + DAC960_ProgressReportingInterval))
5811             {
5812               printk("%sDAC960#%d: %s", DAC960_MessageLevelMap[MessageLevel],
5813                      Controller->ControllerNumber, Buffer);
5814               Controller->LastProgressReportTime = jiffies;
5815             }
5816         }
5817       else printk("%sDAC960#%d: %s", DAC960_MessageLevelMap[MessageLevel],
5818                   Controller->ControllerNumber, Buffer);
5819     }
5820   else if (MessageLevel == DAC960_UserCriticalLevel)
5821     {
5822       strcpy(&Controller->UserStatusBuffer[Controller->UserStatusLength],
5823              Buffer);
5824       Controller->UserStatusLength += Length;
5825       if (Buffer[0] != '\n' || Length > 1)
5826         printk("%sDAC960#%d: %s", DAC960_MessageLevelMap[MessageLevel],
5827                Controller->ControllerNumber, Buffer);
5828     }
5829   else
5830     {
5831       if (BeginningOfLine)
5832         printk("%sDAC960#%d: %s", DAC960_MessageLevelMap[MessageLevel],
5833                Controller->ControllerNumber, Buffer);
5834       else printk("%s", Buffer);
5835     }
5836   BeginningOfLine = (Buffer[Length-1] == '\n');
5837 }
5838
5839
5840 /*
5841   DAC960_ParsePhysicalDevice parses spaces followed by a Physical Device
5842   Channel:TargetID specification from a User Command string.  It updates
5843   Channel and TargetID and returns true on success and false on failure.
5844 */
5845
5846 static bool DAC960_ParsePhysicalDevice(DAC960_Controller_T *Controller,
5847                                           char *UserCommandString,
5848                                           unsigned char *Channel,
5849                                           unsigned char *TargetID)
5850 {
5851   char *NewUserCommandString = UserCommandString;
5852   unsigned long XChannel, XTargetID;
5853   while (*UserCommandString == ' ') UserCommandString++;
5854   if (UserCommandString == NewUserCommandString)
5855     return false;
5856   XChannel = simple_strtoul(UserCommandString, &NewUserCommandString, 10);
5857   if (NewUserCommandString == UserCommandString ||
5858       *NewUserCommandString != ':' ||
5859       XChannel >= Controller->Channels)
5860     return false;
5861   UserCommandString = ++NewUserCommandString;
5862   XTargetID = simple_strtoul(UserCommandString, &NewUserCommandString, 10);
5863   if (NewUserCommandString == UserCommandString ||
5864       *NewUserCommandString != '\0' ||
5865       XTargetID >= Controller->Targets)
5866     return false;
5867   *Channel = XChannel;
5868   *TargetID = XTargetID;
5869   return true;
5870 }
5871
5872
5873 /*
5874   DAC960_ParseLogicalDrive parses spaces followed by a Logical Drive Number
5875   specification from a User Command string.  It updates LogicalDriveNumber and
5876   returns true on success and false on failure.
5877 */
5878
5879 static bool DAC960_ParseLogicalDrive(DAC960_Controller_T *Controller,
5880                                         char *UserCommandString,
5881                                         unsigned char *LogicalDriveNumber)
5882 {
5883   char *NewUserCommandString = UserCommandString;
5884   unsigned long XLogicalDriveNumber;
5885   while (*UserCommandString == ' ') UserCommandString++;
5886   if (UserCommandString == NewUserCommandString)
5887     return false;
5888   XLogicalDriveNumber =
5889     simple_strtoul(UserCommandString, &NewUserCommandString, 10);
5890   if (NewUserCommandString == UserCommandString ||
5891       *NewUserCommandString != '\0' ||
5892       XLogicalDriveNumber > DAC960_MaxLogicalDrives - 1)
5893     return false;
5894   *LogicalDriveNumber = XLogicalDriveNumber;
5895   return true;
5896 }
5897
5898
5899 /*
5900   DAC960_V1_SetDeviceState sets the Device State for a Physical Device for
5901   DAC960 V1 Firmware Controllers.
5902 */
5903
5904 static void DAC960_V1_SetDeviceState(DAC960_Controller_T *Controller,
5905                                      DAC960_Command_T *Command,
5906                                      unsigned char Channel,
5907                                      unsigned char TargetID,
5908                                      DAC960_V1_PhysicalDeviceState_T
5909                                        DeviceState,
5910                                      const unsigned char *DeviceStateString)
5911 {
5912   DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
5913   CommandMailbox->Type3D.CommandOpcode = DAC960_V1_StartDevice;
5914   CommandMailbox->Type3D.Channel = Channel;
5915   CommandMailbox->Type3D.TargetID = TargetID;
5916   CommandMailbox->Type3D.DeviceState = DeviceState;
5917   CommandMailbox->Type3D.Modifier = 0;
5918   DAC960_ExecuteCommand(Command);
5919   switch (Command->V1.CommandStatus)
5920     {
5921     case DAC960_V1_NormalCompletion:
5922       DAC960_UserCritical("%s of Physical Device %d:%d Succeeded\n", Controller,
5923                           DeviceStateString, Channel, TargetID);
5924       break;
5925     case DAC960_V1_UnableToStartDevice:
5926       DAC960_UserCritical("%s of Physical Device %d:%d Failed - "
5927                           "Unable to Start Device\n", Controller,
5928                           DeviceStateString, Channel, TargetID);
5929       break;
5930     case DAC960_V1_NoDeviceAtAddress:
5931       DAC960_UserCritical("%s of Physical Device %d:%d Failed - "
5932                           "No Device at Address\n", Controller,
5933                           DeviceStateString, Channel, TargetID);
5934       break;
5935     case DAC960_V1_InvalidChannelOrTargetOrModifier:
5936       DAC960_UserCritical("%s of Physical Device %d:%d Failed - "
5937                           "Invalid Channel or Target or Modifier\n",
5938                           Controller, DeviceStateString, Channel, TargetID);
5939       break;
5940     case DAC960_V1_ChannelBusy:
5941       DAC960_UserCritical("%s of Physical Device %d:%d Failed - "
5942                           "Channel Busy\n", Controller,
5943                           DeviceStateString, Channel, TargetID);
5944       break;
5945     default:
5946       DAC960_UserCritical("%s of Physical Device %d:%d Failed - "
5947                           "Unexpected Status %04X\n", Controller,
5948                           DeviceStateString, Channel, TargetID,
5949                           Command->V1.CommandStatus);
5950       break;
5951     }
5952 }
5953
5954
5955 /*
5956   DAC960_V1_ExecuteUserCommand executes a User Command for DAC960 V1 Firmware
5957   Controllers.
5958 */
5959
5960 static bool DAC960_V1_ExecuteUserCommand(DAC960_Controller_T *Controller,
5961                                             unsigned char *UserCommand)
5962 {
5963   DAC960_Command_T *Command;
5964   DAC960_V1_CommandMailbox_T *CommandMailbox;
5965   unsigned long flags;
5966   unsigned char Channel, TargetID, LogicalDriveNumber;
5967
5968   spin_lock_irqsave(&Controller->queue_lock, flags);
5969   while ((Command = DAC960_AllocateCommand(Controller)) == NULL)
5970     DAC960_WaitForCommand(Controller);
5971   spin_unlock_irqrestore(&Controller->queue_lock, flags);
5972   Controller->UserStatusLength = 0;
5973   DAC960_V1_ClearCommand(Command);
5974   Command->CommandType = DAC960_ImmediateCommand;
5975   CommandMailbox = &Command->V1.CommandMailbox;
5976   if (strcmp(UserCommand, "flush-cache") == 0)
5977     {
5978       CommandMailbox->Type3.CommandOpcode = DAC960_V1_Flush;
5979       DAC960_ExecuteCommand(Command);
5980       DAC960_UserCritical("Cache Flush Completed\n", Controller);
5981     }
5982   else if (strncmp(UserCommand, "kill", 4) == 0 &&
5983            DAC960_ParsePhysicalDevice(Controller, &UserCommand[4],
5984                                       &Channel, &TargetID))
5985     {
5986       DAC960_V1_DeviceState_T *DeviceState =
5987         &Controller->V1.DeviceState[Channel][TargetID];
5988       if (DeviceState->Present &&
5989           DeviceState->DeviceType == DAC960_V1_DiskType &&
5990           DeviceState->DeviceState != DAC960_V1_Device_Dead)
5991         DAC960_V1_SetDeviceState(Controller, Command, Channel, TargetID,
5992                                  DAC960_V1_Device_Dead, "Kill");
5993       else DAC960_UserCritical("Kill of Physical Device %d:%d Illegal\n",
5994                                Controller, Channel, TargetID);
5995     }
5996   else if (strncmp(UserCommand, "make-online", 11) == 0 &&
5997            DAC960_ParsePhysicalDevice(Controller, &UserCommand[11],
5998                                       &Channel, &TargetID))
5999     {
6000       DAC960_V1_DeviceState_T *DeviceState =
6001         &Controller->V1.DeviceState[Channel][TargetID];
6002       if (DeviceState->Present &&
6003           DeviceState->DeviceType == DAC960_V1_DiskType &&
6004           DeviceState->DeviceState == DAC960_V1_Device_Dead)
6005         DAC960_V1_SetDeviceState(Controller, Command, Channel, TargetID,
6006                                  DAC960_V1_Device_Online, "Make Online");
6007       else DAC960_UserCritical("Make Online of Physical Device %d:%d Illegal\n",
6008                                Controller, Channel, TargetID);
6009
6010     }
6011   else if (strncmp(UserCommand, "make-standby", 12) == 0 &&
6012            DAC960_ParsePhysicalDevice(Controller, &UserCommand[12],
6013                                       &Channel, &TargetID))
6014     {
6015       DAC960_V1_DeviceState_T *DeviceState =
6016         &Controller->V1.DeviceState[Channel][TargetID];
6017       if (DeviceState->Present &&
6018           DeviceState->DeviceType == DAC960_V1_DiskType &&
6019           DeviceState->DeviceState == DAC960_V1_Device_Dead)
6020         DAC960_V1_SetDeviceState(Controller, Command, Channel, TargetID,
6021                                  DAC960_V1_Device_Standby, "Make Standby");
6022       else DAC960_UserCritical("Make Standby of Physical "
6023                                "Device %d:%d Illegal\n",
6024                                Controller, Channel, TargetID);
6025     }
6026   else if (strncmp(UserCommand, "rebuild", 7) == 0 &&
6027            DAC960_ParsePhysicalDevice(Controller, &UserCommand[7],
6028                                       &Channel, &TargetID))
6029     {
6030       CommandMailbox->Type3D.CommandOpcode = DAC960_V1_RebuildAsync;
6031       CommandMailbox->Type3D.Channel = Channel;
6032       CommandMailbox->Type3D.TargetID = TargetID;
6033       DAC960_ExecuteCommand(Command);
6034       switch (Command->V1.CommandStatus)
6035         {
6036         case DAC960_V1_NormalCompletion:
6037           DAC960_UserCritical("Rebuild of Physical Device %d:%d Initiated\n",
6038                               Controller, Channel, TargetID);
6039           break;
6040         case DAC960_V1_AttemptToRebuildOnlineDrive:
6041           DAC960_UserCritical("Rebuild of Physical Device %d:%d Failed - "
6042                               "Attempt to Rebuild Online or "
6043                               "Unresponsive Drive\n",
6044                               Controller, Channel, TargetID);
6045           break;
6046         case DAC960_V1_NewDiskFailedDuringRebuild:
6047           DAC960_UserCritical("Rebuild of Physical Device %d:%d Failed - "
6048                               "New Disk Failed During Rebuild\n",
6049                               Controller, Channel, TargetID);
6050           break;
6051         case DAC960_V1_InvalidDeviceAddress:
6052           DAC960_UserCritical("Rebuild of Physical Device %d:%d Failed - "
6053                               "Invalid Device Address\n",
6054                               Controller, Channel, TargetID);
6055           break;
6056         case DAC960_V1_RebuildOrCheckAlreadyInProgress:
6057           DAC960_UserCritical("Rebuild of Physical Device %d:%d Failed - "
6058                               "Rebuild or Consistency Check Already "
6059                               "in Progress\n", Controller, Channel, TargetID);
6060           break;
6061         default:
6062           DAC960_UserCritical("Rebuild of Physical Device %d:%d Failed - "
6063                               "Unexpected Status %04X\n", Controller,
6064                               Channel, TargetID, Command->V1.CommandStatus);
6065           break;
6066         }
6067     }
6068   else if (strncmp(UserCommand, "check-consistency", 17) == 0 &&
6069            DAC960_ParseLogicalDrive(Controller, &UserCommand[17],
6070                                     &LogicalDriveNumber))
6071     {
6072       CommandMailbox->Type3C.CommandOpcode = DAC960_V1_CheckConsistencyAsync;
6073       CommandMailbox->Type3C.LogicalDriveNumber = LogicalDriveNumber;
6074       CommandMailbox->Type3C.AutoRestore = true;
6075       DAC960_ExecuteCommand(Command);
6076       switch (Command->V1.CommandStatus)
6077         {
6078         case DAC960_V1_NormalCompletion:
6079           DAC960_UserCritical("Consistency Check of Logical Drive %d "
6080                               "(/dev/rd/c%dd%d) Initiated\n",
6081                               Controller, LogicalDriveNumber,
6082                               Controller->ControllerNumber,
6083                               LogicalDriveNumber);
6084           break;
6085         case DAC960_V1_DependentDiskIsDead:
6086           DAC960_UserCritical("Consistency Check of Logical Drive %d "
6087                               "(/dev/rd/c%dd%d) Failed - "
6088                               "Dependent Physical Device is DEAD\n",
6089                               Controller, LogicalDriveNumber,
6090                               Controller->ControllerNumber,
6091                               LogicalDriveNumber);
6092           break;
6093         case DAC960_V1_InvalidOrNonredundantLogicalDrive:
6094           DAC960_UserCritical("Consistency Check of Logical Drive %d "
6095                               "(/dev/rd/c%dd%d) Failed - "
6096                               "Invalid or Nonredundant Logical Drive\n",
6097                               Controller, LogicalDriveNumber,
6098                               Controller->ControllerNumber,
6099                               LogicalDriveNumber);
6100           break;
6101         case DAC960_V1_RebuildOrCheckAlreadyInProgress:
6102           DAC960_UserCritical("Consistency Check of Logical Drive %d "
6103                               "(/dev/rd/c%dd%d) Failed - Rebuild or "
6104                               "Consistency Check Already in Progress\n",
6105                               Controller, LogicalDriveNumber,
6106                               Controller->ControllerNumber,
6107                               LogicalDriveNumber);
6108           break;
6109         default:
6110           DAC960_UserCritical("Consistency Check of Logical Drive %d "
6111                               "(/dev/rd/c%dd%d) Failed - "
6112                               "Unexpected Status %04X\n",
6113                               Controller, LogicalDriveNumber,
6114                               Controller->ControllerNumber,
6115                               LogicalDriveNumber, Command->V1.CommandStatus);
6116           break;
6117         }
6118     }
6119   else if (strcmp(UserCommand, "cancel-rebuild") == 0 ||
6120            strcmp(UserCommand, "cancel-consistency-check") == 0)
6121     {
6122       /*
6123         the OldRebuildRateConstant is never actually used
6124         once its value is retrieved from the controller.
6125        */
6126       unsigned char *OldRebuildRateConstant;
6127       dma_addr_t OldRebuildRateConstantDMA;
6128
6129       OldRebuildRateConstant = pci_alloc_consistent( Controller->PCIDevice,
6130                 sizeof(char), &OldRebuildRateConstantDMA);
6131       if (OldRebuildRateConstant == NULL) {
6132          DAC960_UserCritical("Cancellation of Rebuild or "
6133                              "Consistency Check Failed - "
6134                              "Out of Memory",
6135                              Controller);
6136          goto failure;
6137       }
6138       CommandMailbox->Type3R.CommandOpcode = DAC960_V1_RebuildControl;
6139       CommandMailbox->Type3R.RebuildRateConstant = 0xFF;
6140       CommandMailbox->Type3R.BusAddress = OldRebuildRateConstantDMA;
6141       DAC960_ExecuteCommand(Command);
6142       switch (Command->V1.CommandStatus)
6143         {
6144         case DAC960_V1_NormalCompletion:
6145           DAC960_UserCritical("Rebuild or Consistency Check Cancelled\n",
6146                               Controller);
6147           break;
6148         default:
6149           DAC960_UserCritical("Cancellation of Rebuild or "
6150                               "Consistency Check Failed - "
6151                               "Unexpected Status %04X\n",
6152                               Controller, Command->V1.CommandStatus);
6153           break;
6154         }
6155 failure:
6156         pci_free_consistent(Controller->PCIDevice, sizeof(char),
6157                 OldRebuildRateConstant, OldRebuildRateConstantDMA);
6158     }
6159   else DAC960_UserCritical("Illegal User Command: '%s'\n",
6160                            Controller, UserCommand);
6161
6162   spin_lock_irqsave(&Controller->queue_lock, flags);
6163   DAC960_DeallocateCommand(Command);
6164   spin_unlock_irqrestore(&Controller->queue_lock, flags);
6165   return true;
6166 }
6167
6168
6169 /*
6170   DAC960_V2_TranslatePhysicalDevice translates a Physical Device Channel and
6171   TargetID into a Logical Device.  It returns true on success and false
6172   on failure.
6173 */
6174
6175 static bool DAC960_V2_TranslatePhysicalDevice(DAC960_Command_T *Command,
6176                                                  unsigned char Channel,
6177                                                  unsigned char TargetID,
6178                                                  unsigned short
6179                                                    *LogicalDeviceNumber)
6180 {
6181   DAC960_V2_CommandMailbox_T SavedCommandMailbox, *CommandMailbox;
6182   DAC960_Controller_T *Controller =  Command->Controller;
6183
6184   CommandMailbox = &Command->V2.CommandMailbox;
6185   memcpy(&SavedCommandMailbox, CommandMailbox,
6186          sizeof(DAC960_V2_CommandMailbox_T));
6187
6188   CommandMailbox->PhysicalDeviceInfo.CommandOpcode = DAC960_V2_IOCTL;
6189   CommandMailbox->PhysicalDeviceInfo.CommandControlBits
6190                                     .DataTransferControllerToHost = true;
6191   CommandMailbox->PhysicalDeviceInfo.CommandControlBits
6192                                     .NoAutoRequestSense = true;
6193   CommandMailbox->PhysicalDeviceInfo.DataTransferSize =
6194     sizeof(DAC960_V2_PhysicalToLogicalDevice_T);
6195   CommandMailbox->PhysicalDeviceInfo.PhysicalDevice.TargetID = TargetID;
6196   CommandMailbox->PhysicalDeviceInfo.PhysicalDevice.Channel = Channel;
6197   CommandMailbox->PhysicalDeviceInfo.IOCTL_Opcode =
6198     DAC960_V2_TranslatePhysicalToLogicalDevice;
6199   CommandMailbox->Common.DataTransferMemoryAddress
6200                         .ScatterGatherSegments[0]
6201                         .SegmentDataPointer =
6202                 Controller->V2.PhysicalToLogicalDeviceDMA;
6203   CommandMailbox->Common.DataTransferMemoryAddress
6204                         .ScatterGatherSegments[0]
6205                         .SegmentByteCount =
6206                 CommandMailbox->Common.DataTransferSize;
6207
6208   DAC960_ExecuteCommand(Command);
6209   *LogicalDeviceNumber = Controller->V2.PhysicalToLogicalDevice->LogicalDeviceNumber;
6210
6211   memcpy(CommandMailbox, &SavedCommandMailbox,
6212          sizeof(DAC960_V2_CommandMailbox_T));
6213   return (Command->V2.CommandStatus == DAC960_V2_NormalCompletion);
6214 }
6215
6216
6217 /*
6218   DAC960_V2_ExecuteUserCommand executes a User Command for DAC960 V2 Firmware
6219   Controllers.
6220 */
6221
6222 static bool DAC960_V2_ExecuteUserCommand(DAC960_Controller_T *Controller,
6223                                             unsigned char *UserCommand)
6224 {
6225   DAC960_Command_T *Command;
6226   DAC960_V2_CommandMailbox_T *CommandMailbox;
6227   unsigned long flags;
6228   unsigned char Channel, TargetID, LogicalDriveNumber;
6229   unsigned short LogicalDeviceNumber;
6230
6231   spin_lock_irqsave(&Controller->queue_lock, flags);
6232   while ((Command = DAC960_AllocateCommand(Controller)) == NULL)
6233     DAC960_WaitForCommand(Controller);
6234   spin_unlock_irqrestore(&Controller->queue_lock, flags);
6235   Controller->UserStatusLength = 0;
6236   DAC960_V2_ClearCommand(Command);
6237   Command->CommandType = DAC960_ImmediateCommand;
6238   CommandMailbox = &Command->V2.CommandMailbox;
6239   CommandMailbox->Common.CommandOpcode = DAC960_V2_IOCTL;
6240   CommandMailbox->Common.CommandControlBits.DataTransferControllerToHost = true;
6241   CommandMailbox->Common.CommandControlBits.NoAutoRequestSense = true;
6242   if (strcmp(UserCommand, "flush-cache") == 0)
6243     {
6244       CommandMailbox->DeviceOperation.IOCTL_Opcode = DAC960_V2_PauseDevice;
6245       CommandMailbox->DeviceOperation.OperationDevice =
6246         DAC960_V2_RAID_Controller;
6247       DAC960_ExecuteCommand(Command);
6248       DAC960_UserCritical("Cache Flush Completed\n", Controller);
6249     }
6250   else if (strncmp(UserCommand, "kill", 4) == 0 &&
6251            DAC960_ParsePhysicalDevice(Controller, &UserCommand[4],
6252                                       &Channel, &TargetID) &&
6253            DAC960_V2_TranslatePhysicalDevice(Command, Channel, TargetID,
6254                                              &LogicalDeviceNumber))
6255     {
6256       CommandMailbox->SetDeviceState.LogicalDevice.LogicalDeviceNumber =
6257         LogicalDeviceNumber;
6258       CommandMailbox->SetDeviceState.IOCTL_Opcode =
6259         DAC960_V2_SetDeviceState;
6260       CommandMailbox->SetDeviceState.DeviceState.PhysicalDeviceState =
6261         DAC960_V2_Device_Dead;
6262       DAC960_ExecuteCommand(Command);
6263       DAC960_UserCritical("Kill of Physical Device %d:%d %s\n",
6264                           Controller, Channel, TargetID,
6265                           (Command->V2.CommandStatus
6266                            == DAC960_V2_NormalCompletion
6267                            ? "Succeeded" : "Failed"));
6268     }
6269   else if (strncmp(UserCommand, "make-online", 11) == 0 &&
6270            DAC960_ParsePhysicalDevice(Controller, &UserCommand[11],
6271                                       &Channel, &TargetID) &&
6272            DAC960_V2_TranslatePhysicalDevice(Command, Channel, TargetID,
6273                                              &LogicalDeviceNumber))
6274     {
6275       CommandMailbox->SetDeviceState.LogicalDevice.LogicalDeviceNumber =
6276         LogicalDeviceNumber;
6277       CommandMailbox->SetDeviceState.IOCTL_Opcode =
6278         DAC960_V2_SetDeviceState;
6279       CommandMailbox->SetDeviceState.DeviceState.PhysicalDeviceState =
6280         DAC960_V2_Device_Online;
6281       DAC960_ExecuteCommand(Command);
6282       DAC960_UserCritical("Make Online of Physical Device %d:%d %s\n",
6283                           Controller, Channel, TargetID,
6284                           (Command->V2.CommandStatus
6285                            == DAC960_V2_NormalCompletion
6286                            ? "Succeeded" : "Failed"));
6287     }
6288   else if (strncmp(UserCommand, "make-standby", 12) == 0 &&
6289            DAC960_ParsePhysicalDevice(Controller, &UserCommand[12],
6290                                       &Channel, &TargetID) &&
6291            DAC960_V2_TranslatePhysicalDevice(Command, Channel, TargetID,
6292                                              &LogicalDeviceNumber))
6293     {
6294       CommandMailbox->SetDeviceState.LogicalDevice.LogicalDeviceNumber =
6295         LogicalDeviceNumber;
6296       CommandMailbox->SetDeviceState.IOCTL_Opcode =
6297         DAC960_V2_SetDeviceState;
6298       CommandMailbox->SetDeviceState.DeviceState.PhysicalDeviceState =
6299         DAC960_V2_Device_Standby;
6300       DAC960_ExecuteCommand(Command);
6301       DAC960_UserCritical("Make Standby of Physical Device %d:%d %s\n",
6302                           Controller, Channel, TargetID,
6303                           (Command->V2.CommandStatus
6304                            == DAC960_V2_NormalCompletion
6305                            ? "Succeeded" : "Failed"));
6306     }
6307   else if (strncmp(UserCommand, "rebuild", 7) == 0 &&
6308            DAC960_ParsePhysicalDevice(Controller, &UserCommand[7],
6309                                       &Channel, &TargetID) &&
6310            DAC960_V2_TranslatePhysicalDevice(Command, Channel, TargetID,
6311                                              &LogicalDeviceNumber))
6312     {
6313       CommandMailbox->LogicalDeviceInfo.LogicalDevice.LogicalDeviceNumber =
6314         LogicalDeviceNumber;
6315       CommandMailbox->LogicalDeviceInfo.IOCTL_Opcode =
6316         DAC960_V2_RebuildDeviceStart;
6317       DAC960_ExecuteCommand(Command);
6318       DAC960_UserCritical("Rebuild of Physical Device %d:%d %s\n",
6319                           Controller, Channel, TargetID,
6320                           (Command->V2.CommandStatus
6321                            == DAC960_V2_NormalCompletion
6322                            ? "Initiated" : "Not Initiated"));
6323     }
6324   else if (strncmp(UserCommand, "cancel-rebuild", 14) == 0 &&
6325            DAC960_ParsePhysicalDevice(Controller, &UserCommand[14],
6326                                       &Channel, &TargetID) &&
6327            DAC960_V2_TranslatePhysicalDevice(Command, Channel, TargetID,
6328                                              &LogicalDeviceNumber))
6329     {
6330       CommandMailbox->LogicalDeviceInfo.LogicalDevice.LogicalDeviceNumber =
6331         LogicalDeviceNumber;
6332       CommandMailbox->LogicalDeviceInfo.IOCTL_Opcode =
6333         DAC960_V2_RebuildDeviceStop;
6334       DAC960_ExecuteCommand(Command);
6335       DAC960_UserCritical("Rebuild of Physical Device %d:%d %s\n",
6336                           Controller, Channel, TargetID,
6337                           (Command->V2.CommandStatus
6338                            == DAC960_V2_NormalCompletion
6339                            ? "Cancelled" : "Not Cancelled"));
6340     }
6341   else if (strncmp(UserCommand, "check-consistency", 17) == 0 &&
6342            DAC960_ParseLogicalDrive(Controller, &UserCommand[17],
6343                                     &LogicalDriveNumber))
6344     {
6345       CommandMailbox->ConsistencyCheck.LogicalDevice.LogicalDeviceNumber =
6346         LogicalDriveNumber;
6347       CommandMailbox->ConsistencyCheck.IOCTL_Opcode =
6348         DAC960_V2_ConsistencyCheckStart;
6349       CommandMailbox->ConsistencyCheck.RestoreConsistency = true;
6350       CommandMailbox->ConsistencyCheck.InitializedAreaOnly = false;
6351       DAC960_ExecuteCommand(Command);
6352       DAC960_UserCritical("Consistency Check of Logical Drive %d "
6353                           "(/dev/rd/c%dd%d) %s\n",
6354                           Controller, LogicalDriveNumber,
6355                           Controller->ControllerNumber,
6356                           LogicalDriveNumber,
6357                           (Command->V2.CommandStatus
6358                            == DAC960_V2_NormalCompletion
6359                            ? "Initiated" : "Not Initiated"));
6360     }
6361   else if (strncmp(UserCommand, "cancel-consistency-check", 24) == 0 &&
6362            DAC960_ParseLogicalDrive(Controller, &UserCommand[24],
6363                                     &LogicalDriveNumber))
6364     {
6365       CommandMailbox->ConsistencyCheck.LogicalDevice.LogicalDeviceNumber =
6366         LogicalDriveNumber;
6367       CommandMailbox->ConsistencyCheck.IOCTL_Opcode =
6368         DAC960_V2_ConsistencyCheckStop;
6369       DAC960_ExecuteCommand(Command);
6370       DAC960_UserCritical("Consistency Check of Logical Drive %d "
6371                           "(/dev/rd/c%dd%d) %s\n",
6372                           Controller, LogicalDriveNumber,
6373                           Controller->ControllerNumber,
6374                           LogicalDriveNumber,
6375                           (Command->V2.CommandStatus
6376                            == DAC960_V2_NormalCompletion
6377                            ? "Cancelled" : "Not Cancelled"));
6378     }
6379   else if (strcmp(UserCommand, "perform-discovery") == 0)
6380     {
6381       CommandMailbox->Common.IOCTL_Opcode = DAC960_V2_StartDiscovery;
6382       DAC960_ExecuteCommand(Command);
6383       DAC960_UserCritical("Discovery %s\n", Controller,
6384                           (Command->V2.CommandStatus
6385                            == DAC960_V2_NormalCompletion
6386                            ? "Initiated" : "Not Initiated"));
6387       if (Command->V2.CommandStatus == DAC960_V2_NormalCompletion)
6388         {
6389           CommandMailbox->ControllerInfo.CommandOpcode = DAC960_V2_IOCTL;
6390           CommandMailbox->ControllerInfo.CommandControlBits
6391                                         .DataTransferControllerToHost = true;
6392           CommandMailbox->ControllerInfo.CommandControlBits
6393                                         .NoAutoRequestSense = true;
6394           CommandMailbox->ControllerInfo.DataTransferSize =
6395             sizeof(DAC960_V2_ControllerInfo_T);
6396           CommandMailbox->ControllerInfo.ControllerNumber = 0;
6397           CommandMailbox->ControllerInfo.IOCTL_Opcode =
6398             DAC960_V2_GetControllerInfo;
6399           /*
6400            * How does this NOT race with the queued Monitoring
6401            * usage of this structure?
6402            */
6403           CommandMailbox->ControllerInfo.DataTransferMemoryAddress
6404                                         .ScatterGatherSegments[0]
6405                                         .SegmentDataPointer =
6406             Controller->V2.NewControllerInformationDMA;
6407           CommandMailbox->ControllerInfo.DataTransferMemoryAddress
6408                                         .ScatterGatherSegments[0]
6409                                         .SegmentByteCount =
6410             CommandMailbox->ControllerInfo.DataTransferSize;
6411           DAC960_ExecuteCommand(Command);
6412           while (Controller->V2.NewControllerInformation->PhysicalScanActive)
6413             {
6414               DAC960_ExecuteCommand(Command);
6415               sleep_on_timeout(&Controller->CommandWaitQueue, HZ);
6416             }
6417           DAC960_UserCritical("Discovery Completed\n", Controller);
6418         }
6419     }
6420   else if (strcmp(UserCommand, "suppress-enclosure-messages") == 0)
6421     Controller->SuppressEnclosureMessages = true;
6422   else DAC960_UserCritical("Illegal User Command: '%s'\n",
6423                            Controller, UserCommand);
6424
6425   spin_lock_irqsave(&Controller->queue_lock, flags);
6426   DAC960_DeallocateCommand(Command);
6427   spin_unlock_irqrestore(&Controller->queue_lock, flags);
6428   return true;
6429 }
6430
6431 static int dac960_proc_show(struct seq_file *m, void *v)
6432 {
6433   unsigned char *StatusMessage = "OK\n";
6434   int ControllerNumber;
6435   for (ControllerNumber = 0;
6436        ControllerNumber < DAC960_ControllerCount;
6437        ControllerNumber++)
6438     {
6439       DAC960_Controller_T *Controller = DAC960_Controllers[ControllerNumber];
6440       if (Controller == NULL) continue;
6441       if (Controller->MonitoringAlertMode)
6442         {
6443           StatusMessage = "ALERT\n";
6444           break;
6445         }
6446     }
6447   seq_puts(m, StatusMessage);
6448   return 0;
6449 }
6450
6451 static int dac960_proc_open(struct inode *inode, struct file *file)
6452 {
6453         return single_open(file, dac960_proc_show, NULL);
6454 }
6455
6456 static const struct file_operations dac960_proc_fops = {
6457         .owner          = THIS_MODULE,
6458         .open           = dac960_proc_open,
6459         .read           = seq_read,
6460         .llseek         = seq_lseek,
6461         .release        = single_release,
6462 };
6463
6464 static int dac960_initial_status_proc_show(struct seq_file *m, void *v)
6465 {
6466         DAC960_Controller_T *Controller = (DAC960_Controller_T *)m->private;
6467         seq_printf(m, "%.*s", Controller->InitialStatusLength, Controller->CombinedStatusBuffer);
6468         return 0;
6469 }
6470
6471 static int dac960_initial_status_proc_open(struct inode *inode, struct file *file)
6472 {
6473         return single_open(file, dac960_initial_status_proc_show, PDE(inode)->data);
6474 }
6475
6476 static const struct file_operations dac960_initial_status_proc_fops = {
6477         .owner          = THIS_MODULE,
6478         .open           = dac960_initial_status_proc_open,
6479         .read           = seq_read,
6480         .llseek         = seq_lseek,
6481         .release        = single_release,
6482 };
6483
6484 static int dac960_current_status_proc_show(struct seq_file *m, void *v)
6485 {
6486   DAC960_Controller_T *Controller = (DAC960_Controller_T *) m->private;
6487   unsigned char *StatusMessage =
6488     "No Rebuild or Consistency Check in Progress\n";
6489   int ProgressMessageLength = strlen(StatusMessage);
6490   if (jiffies != Controller->LastCurrentStatusTime)
6491     {
6492       Controller->CurrentStatusLength = 0;
6493       DAC960_AnnounceDriver(Controller);
6494       DAC960_ReportControllerConfiguration(Controller);
6495       DAC960_ReportDeviceConfiguration(Controller);
6496       if (Controller->ProgressBufferLength > 0)
6497         ProgressMessageLength = Controller->ProgressBufferLength;
6498       if (DAC960_CheckStatusBuffer(Controller, 2 + ProgressMessageLength))
6499         {
6500           unsigned char *CurrentStatusBuffer = Controller->CurrentStatusBuffer;
6501           CurrentStatusBuffer[Controller->CurrentStatusLength++] = ' ';
6502           CurrentStatusBuffer[Controller->CurrentStatusLength++] = ' ';
6503           if (Controller->ProgressBufferLength > 0)
6504             strcpy(&CurrentStatusBuffer[Controller->CurrentStatusLength],
6505                    Controller->ProgressBuffer);
6506           else
6507             strcpy(&CurrentStatusBuffer[Controller->CurrentStatusLength],
6508                    StatusMessage);
6509           Controller->CurrentStatusLength += ProgressMessageLength;
6510         }
6511       Controller->LastCurrentStatusTime = jiffies;
6512     }
6513         seq_printf(m, "%.*s", Controller->CurrentStatusLength, Controller->CurrentStatusBuffer);
6514         return 0;
6515 }
6516
6517 static int dac960_current_status_proc_open(struct inode *inode, struct file *file)
6518 {
6519         return single_open(file, dac960_current_status_proc_show, PDE(inode)->data);
6520 }
6521
6522 static const struct file_operations dac960_current_status_proc_fops = {
6523         .owner          = THIS_MODULE,
6524         .open           = dac960_current_status_proc_open,
6525         .read           = seq_read,
6526         .llseek         = seq_lseek,
6527         .release        = single_release,
6528 };
6529
6530 static int dac960_user_command_proc_show(struct seq_file *m, void *v)
6531 {
6532         DAC960_Controller_T *Controller = (DAC960_Controller_T *)m->private;
6533
6534         seq_printf(m, "%.*s", Controller->UserStatusLength, Controller->UserStatusBuffer);
6535         return 0;
6536 }
6537
6538 static int dac960_user_command_proc_open(struct inode *inode, struct file *file)
6539 {
6540         return single_open(file, dac960_user_command_proc_show, PDE(inode)->data);
6541 }
6542
6543 static ssize_t dac960_user_command_proc_write(struct file *file,
6544                                        const char __user *Buffer,
6545                                        size_t Count, loff_t *pos)
6546 {
6547   DAC960_Controller_T *Controller = (DAC960_Controller_T *) PDE(file->f_path.dentry->d_inode)->data;
6548   unsigned char CommandBuffer[80];
6549   int Length;
6550   if (Count > sizeof(CommandBuffer)-1) return -EINVAL;
6551   if (copy_from_user(CommandBuffer, Buffer, Count)) return -EFAULT;
6552   CommandBuffer[Count] = '\0';
6553   Length = strlen(CommandBuffer);
6554   if (Length > 0 && CommandBuffer[Length-1] == '\n')
6555     CommandBuffer[--Length] = '\0';
6556   if (Controller->FirmwareType == DAC960_V1_Controller)
6557     return (DAC960_V1_ExecuteUserCommand(Controller, CommandBuffer)
6558             ? Count : -EBUSY);
6559   else
6560     return (DAC960_V2_ExecuteUserCommand(Controller, CommandBuffer)
6561             ? Count : -EBUSY);
6562 }
6563
6564 static const struct file_operations dac960_user_command_proc_fops = {
6565         .owner          = THIS_MODULE,
6566         .open           = dac960_user_command_proc_open,
6567         .read           = seq_read,
6568         .llseek         = seq_lseek,
6569         .release        = single_release,
6570         .write          = dac960_user_command_proc_write,
6571 };
6572
6573 /*
6574   DAC960_CreateProcEntries creates the /proc/rd/... entries for the
6575   DAC960 Driver.
6576 */
6577
6578 static void DAC960_CreateProcEntries(DAC960_Controller_T *Controller)
6579 {
6580         struct proc_dir_entry *StatusProcEntry;
6581         struct proc_dir_entry *ControllerProcEntry;
6582         struct proc_dir_entry *UserCommandProcEntry;
6583
6584         if (DAC960_ProcDirectoryEntry == NULL) {
6585                 DAC960_ProcDirectoryEntry = proc_mkdir("rd", NULL);
6586                 StatusProcEntry = proc_create("status", 0,
6587                                            DAC960_ProcDirectoryEntry,
6588                                            &dac960_proc_fops);
6589         }
6590
6591       sprintf(Controller->ControllerName, "c%d", Controller->ControllerNumber);
6592       ControllerProcEntry = proc_mkdir(Controller->ControllerName,
6593                                        DAC960_ProcDirectoryEntry);
6594       proc_create_data("initial_status", 0, ControllerProcEntry, &dac960_initial_status_proc_fops, Controller);
6595       proc_create_data("current_status", 0, ControllerProcEntry, &dac960_current_status_proc_fops, Controller);
6596       UserCommandProcEntry = proc_create_data("user_command", S_IWUSR | S_IRUSR, ControllerProcEntry, &dac960_user_command_proc_fops, Controller);
6597       Controller->ControllerProcEntry = ControllerProcEntry;
6598 }
6599
6600
6601 /*
6602   DAC960_DestroyProcEntries destroys the /proc/rd/... entries for the
6603   DAC960 Driver.
6604 */
6605
6606 static void DAC960_DestroyProcEntries(DAC960_Controller_T *Controller)
6607 {
6608       if (Controller->ControllerProcEntry == NULL)
6609               return;
6610       remove_proc_entry("initial_status", Controller->ControllerProcEntry);
6611       remove_proc_entry("current_status", Controller->ControllerProcEntry);
6612       remove_proc_entry("user_command", Controller->ControllerProcEntry);
6613       remove_proc_entry(Controller->ControllerName, DAC960_ProcDirectoryEntry);
6614       Controller->ControllerProcEntry = NULL;
6615 }
6616
6617 #ifdef DAC960_GAM_MINOR
6618
6619 /*
6620  * DAC960_gam_ioctl is the ioctl function for performing RAID operations.
6621 */
6622
6623 static long DAC960_gam_ioctl(struct file *file, unsigned int Request,
6624                                                 unsigned long Argument)
6625 {
6626   long ErrorCode = 0;
6627   if (!capable(CAP_SYS_ADMIN)) return -EACCES;
6628
6629   mutex_lock(&DAC960_mutex);
6630   switch (Request)
6631     {
6632     case DAC960_IOCTL_GET_CONTROLLER_COUNT:
6633       ErrorCode = DAC960_ControllerCount;
6634       break;
6635     case DAC960_IOCTL_GET_CONTROLLER_INFO:
6636       {
6637         DAC960_ControllerInfo_T __user *UserSpaceControllerInfo =
6638           (DAC960_ControllerInfo_T __user *) Argument;
6639         DAC960_ControllerInfo_T ControllerInfo;
6640         DAC960_Controller_T *Controller;
6641         int ControllerNumber;
6642         if (UserSpaceControllerInfo == NULL)
6643                 ErrorCode = -EINVAL;
6644         else ErrorCode = get_user(ControllerNumber,
6645                              &UserSpaceControllerInfo->ControllerNumber);
6646         if (ErrorCode != 0)
6647                 break;
6648         ErrorCode = -ENXIO;
6649         if (ControllerNumber < 0 ||
6650             ControllerNumber > DAC960_ControllerCount - 1) {
6651           break;
6652         }
6653         Controller = DAC960_Controllers[ControllerNumber];
6654         if (Controller == NULL)
6655                 break;
6656         memset(&ControllerInfo, 0, sizeof(DAC960_ControllerInfo_T));
6657         ControllerInfo.ControllerNumber = ControllerNumber;
6658         ControllerInfo.FirmwareType = Controller->FirmwareType;
6659         ControllerInfo.Channels = Controller->Channels;
6660         ControllerInfo.Targets = Controller->Targets;
6661         ControllerInfo.PCI_Bus = Controller->Bus;
6662         ControllerInfo.PCI_Device = Controller->Device;
6663         ControllerInfo.PCI_Function = Controller->Function;
6664         ControllerInfo.IRQ_Channel = Controller->IRQ_Channel;
6665         ControllerInfo.PCI_Address = Controller->PCI_Address;
6666         strcpy(ControllerInfo.ModelName, Controller->ModelName);
6667         strcpy(ControllerInfo.FirmwareVersion, Controller->FirmwareVersion);
6668         ErrorCode = (copy_to_user(UserSpaceControllerInfo, &ControllerInfo,
6669                              sizeof(DAC960_ControllerInfo_T)) ? -EFAULT : 0);
6670         break;
6671       }
6672     case DAC960_IOCTL_V1_EXECUTE_COMMAND:
6673       {
6674         DAC960_V1_UserCommand_T __user *UserSpaceUserCommand =
6675           (DAC960_V1_UserCommand_T __user *) Argument;
6676         DAC960_V1_UserCommand_T UserCommand;
6677         DAC960_Controller_T *Controller;
6678         DAC960_Command_T *Command = NULL;
6679         DAC960_V1_CommandOpcode_T CommandOpcode;
6680         DAC960_V1_CommandStatus_T CommandStatus;
6681         DAC960_V1_DCDB_T DCDB;
6682         DAC960_V1_DCDB_T *DCDB_IOBUF = NULL;
6683         dma_addr_t      DCDB_IOBUFDMA;
6684         unsigned long flags;
6685         int ControllerNumber, DataTransferLength;
6686         unsigned char *DataTransferBuffer = NULL;
6687         dma_addr_t DataTransferBufferDMA;
6688         if (UserSpaceUserCommand == NULL) {
6689                 ErrorCode = -EINVAL;
6690                 break;
6691         }
6692         if (copy_from_user(&UserCommand, UserSpaceUserCommand,
6693                                    sizeof(DAC960_V1_UserCommand_T))) {
6694                 ErrorCode = -EFAULT;
6695                 break;
6696         }
6697         ControllerNumber = UserCommand.ControllerNumber;
6698         ErrorCode = -ENXIO;
6699         if (ControllerNumber < 0 ||
6700             ControllerNumber > DAC960_ControllerCount - 1)
6701                 break;
6702         Controller = DAC960_Controllers[ControllerNumber];
6703         if (Controller == NULL)
6704                 break;
6705         ErrorCode = -EINVAL;
6706         if (Controller->FirmwareType != DAC960_V1_Controller)
6707                 break;
6708         CommandOpcode = UserCommand.CommandMailbox.Common.CommandOpcode;
6709         DataTransferLength = UserCommand.DataTransferLength;
6710         if (CommandOpcode & 0x80)
6711                 break;
6712         if (CommandOpcode == DAC960_V1_DCDB)
6713           {
6714             if (copy_from_user(&DCDB, UserCommand.DCDB,
6715                                sizeof(DAC960_V1_DCDB_T))) {
6716                 ErrorCode = -EFAULT;
6717                 break;
6718             }
6719             if (DCDB.Channel >= DAC960_V1_MaxChannels)
6720                         break;
6721             if (!((DataTransferLength == 0 &&
6722                    DCDB.Direction
6723                    == DAC960_V1_DCDB_NoDataTransfer) ||
6724                   (DataTransferLength > 0 &&
6725                    DCDB.Direction
6726                    == DAC960_V1_DCDB_DataTransferDeviceToSystem) ||
6727                   (DataTransferLength < 0 &&
6728                    DCDB.Direction
6729                    == DAC960_V1_DCDB_DataTransferSystemToDevice)))
6730                         break;
6731             if (((DCDB.TransferLengthHigh4 << 16) | DCDB.TransferLength)
6732                 != abs(DataTransferLength))
6733                         break;
6734             DCDB_IOBUF = pci_alloc_consistent(Controller->PCIDevice,
6735                         sizeof(DAC960_V1_DCDB_T), &DCDB_IOBUFDMA);
6736             if (DCDB_IOBUF == NULL) {
6737                         ErrorCode = -ENOMEM;
6738                         break;
6739                 }
6740           }
6741         ErrorCode = -ENOMEM;
6742         if (DataTransferLength > 0)
6743           {
6744             DataTransferBuffer = pci_alloc_consistent(Controller->PCIDevice,
6745                                 DataTransferLength, &DataTransferBufferDMA);
6746             if (DataTransferBuffer == NULL)
6747                 break;
6748             memset(DataTransferBuffer, 0, DataTransferLength);
6749           }
6750         else if (DataTransferLength < 0)
6751           {
6752             DataTransferBuffer = pci_alloc_consistent(Controller->PCIDevice,
6753                                 -DataTransferLength, &DataTransferBufferDMA);
6754             if (DataTransferBuffer == NULL)
6755                 break;
6756             if (copy_from_user(DataTransferBuffer,
6757                                UserCommand.DataTransferBuffer,
6758                                -DataTransferLength)) {
6759                 ErrorCode = -EFAULT;
6760                 break;
6761             }
6762           }
6763         if (CommandOpcode == DAC960_V1_DCDB)
6764           {
6765             spin_lock_irqsave(&Controller->queue_lock, flags);
6766             while ((Command = DAC960_AllocateCommand(Controller)) == NULL)
6767               DAC960_WaitForCommand(Controller);
6768             while (Controller->V1.DirectCommandActive[DCDB.Channel]
6769                                                      [DCDB.TargetID])
6770               {
6771                 spin_unlock_irq(&Controller->queue_lock);
6772                 __wait_event(Controller->CommandWaitQueue,
6773                              !Controller->V1.DirectCommandActive
6774                                              [DCDB.Channel][DCDB.TargetID]);
6775                 spin_lock_irq(&Controller->queue_lock);
6776               }
6777             Controller->V1.DirectCommandActive[DCDB.Channel]
6778                                               [DCDB.TargetID] = true;
6779             spin_unlock_irqrestore(&Controller->queue_lock, flags);
6780             DAC960_V1_ClearCommand(Command);
6781             Command->CommandType = DAC960_ImmediateCommand;
6782             memcpy(&Command->V1.CommandMailbox, &UserCommand.CommandMailbox,
6783                    sizeof(DAC960_V1_CommandMailbox_T));
6784             Command->V1.CommandMailbox.Type3.BusAddress = DCDB_IOBUFDMA;
6785             DCDB.BusAddress = DataTransferBufferDMA;
6786             memcpy(DCDB_IOBUF, &DCDB, sizeof(DAC960_V1_DCDB_T));
6787           }
6788         else
6789           {
6790             spin_lock_irqsave(&Controller->queue_lock, flags);
6791             while ((Command = DAC960_AllocateCommand(Controller)) == NULL)
6792               DAC960_WaitForCommand(Controller);
6793             spin_unlock_irqrestore(&Controller->queue_lock, flags);
6794             DAC960_V1_ClearCommand(Command);
6795             Command->CommandType = DAC960_ImmediateCommand;
6796             memcpy(&Command->V1.CommandMailbox, &UserCommand.CommandMailbox,
6797                    sizeof(DAC960_V1_CommandMailbox_T));
6798             if (DataTransferBuffer != NULL)
6799               Command->V1.CommandMailbox.Type3.BusAddress =
6800                 DataTransferBufferDMA;
6801           }
6802         DAC960_ExecuteCommand(Command);
6803         CommandStatus = Command->V1.CommandStatus;
6804         spin_lock_irqsave(&Controller->queue_lock, flags);
6805         DAC960_DeallocateCommand(Command);
6806         spin_unlock_irqrestore(&Controller->queue_lock, flags);
6807         if (DataTransferLength > 0)
6808           {
6809             if (copy_to_user(UserCommand.DataTransferBuffer,
6810                              DataTransferBuffer, DataTransferLength)) {
6811                 ErrorCode = -EFAULT;
6812                 goto Failure1;
6813             }
6814           }
6815         if (CommandOpcode == DAC960_V1_DCDB)
6816           {
6817             /*
6818               I don't believe Target or Channel in the DCDB_IOBUF
6819               should be any different from the contents of DCDB.
6820              */
6821             Controller->V1.DirectCommandActive[DCDB.Channel]
6822                                               [DCDB.TargetID] = false;
6823             if (copy_to_user(UserCommand.DCDB, DCDB_IOBUF,
6824                              sizeof(DAC960_V1_DCDB_T))) {
6825                 ErrorCode = -EFAULT;
6826                 goto Failure1;
6827             }
6828           }
6829         ErrorCode = CommandStatus;
6830       Failure1:
6831         if (DataTransferBuffer != NULL)
6832           pci_free_consistent(Controller->PCIDevice, abs(DataTransferLength),
6833                         DataTransferBuffer, DataTransferBufferDMA);
6834         if (DCDB_IOBUF != NULL)
6835           pci_free_consistent(Controller->PCIDevice, sizeof(DAC960_V1_DCDB_T),
6836                         DCDB_IOBUF, DCDB_IOBUFDMA);
6837         break;
6838       }
6839     case DAC960_IOCTL_V2_EXECUTE_COMMAND:
6840       {
6841         DAC960_V2_UserCommand_T __user *UserSpaceUserCommand =
6842           (DAC960_V2_UserCommand_T __user *) Argument;
6843         DAC960_V2_UserCommand_T UserCommand;
6844         DAC960_Controller_T *Controller;
6845         DAC960_Command_T *Command = NULL;
6846         DAC960_V2_CommandMailbox_T *CommandMailbox;
6847         DAC960_V2_CommandStatus_T CommandStatus;
6848         unsigned long flags;
6849         int ControllerNumber, DataTransferLength;
6850         int DataTransferResidue, RequestSenseLength;
6851         unsigned char *DataTransferBuffer = NULL;
6852         dma_addr_t DataTransferBufferDMA;
6853         unsigned char *RequestSenseBuffer = NULL;
6854         dma_addr_t RequestSenseBufferDMA;
6855
6856         ErrorCode = -EINVAL;
6857         if (UserSpaceUserCommand == NULL)
6858                 break;
6859         if (copy_from_user(&UserCommand, UserSpaceUserCommand,
6860                            sizeof(DAC960_V2_UserCommand_T))) {
6861                 ErrorCode = -EFAULT;
6862                 break;
6863         }
6864         ErrorCode = -ENXIO;
6865         ControllerNumber = UserCommand.ControllerNumber;
6866         if (ControllerNumber < 0 ||
6867             ControllerNumber > DAC960_ControllerCount - 1)
6868                 break;
6869         Controller = DAC960_Controllers[ControllerNumber];
6870         if (Controller == NULL)
6871                 break;
6872         if (Controller->FirmwareType != DAC960_V2_Controller){
6873                 ErrorCode = -EINVAL;
6874                 break;
6875         }
6876         DataTransferLength = UserCommand.DataTransferLength;
6877         ErrorCode = -ENOMEM;
6878         if (DataTransferLength > 0)
6879           {
6880             DataTransferBuffer = pci_alloc_consistent(Controller->PCIDevice,
6881                                 DataTransferLength, &DataTransferBufferDMA);
6882             if (DataTransferBuffer == NULL)
6883                 break;
6884             memset(DataTransferBuffer, 0, DataTransferLength);
6885           }
6886         else if (DataTransferLength < 0)
6887           {
6888             DataTransferBuffer = pci_alloc_consistent(Controller->PCIDevice,
6889                                 -DataTransferLength, &DataTransferBufferDMA);
6890             if (DataTransferBuffer == NULL)
6891                 break;
6892             if (copy_from_user(DataTransferBuffer,
6893                                UserCommand.DataTransferBuffer,
6894                                -DataTransferLength)) {
6895                 ErrorCode = -EFAULT;
6896                 goto Failure2;
6897             }
6898           }
6899         RequestSenseLength = UserCommand.RequestSenseLength;
6900         if (RequestSenseLength > 0)
6901           {
6902             RequestSenseBuffer = pci_alloc_consistent(Controller->PCIDevice,
6903                         RequestSenseLength, &RequestSenseBufferDMA);
6904             if (RequestSenseBuffer == NULL)
6905               {
6906                 ErrorCode = -ENOMEM;
6907                 goto Failure2;
6908               }
6909             memset(RequestSenseBuffer, 0, RequestSenseLength);
6910           }
6911         spin_lock_irqsave(&Controller->queue_lock, flags);
6912         while ((Command = DAC960_AllocateCommand(Controller)) == NULL)
6913           DAC960_WaitForCommand(Controller);
6914         spin_unlock_irqrestore(&Controller->queue_lock, flags);
6915         DAC960_V2_ClearCommand(Command);
6916         Command->CommandType = DAC960_ImmediateCommand;
6917         CommandMailbox = &Command->V2.CommandMailbox;
6918         memcpy(CommandMailbox, &UserCommand.CommandMailbox,
6919                sizeof(DAC960_V2_CommandMailbox_T));
6920         CommandMailbox->Common.CommandControlBits
6921                               .AdditionalScatterGatherListMemory = false;
6922         CommandMailbox->Common.CommandControlBits
6923                               .NoAutoRequestSense = true;
6924         CommandMailbox->Common.DataTransferSize = 0;
6925         CommandMailbox->Common.DataTransferPageNumber = 0;
6926         memset(&CommandMailbox->Common.DataTransferMemoryAddress, 0,
6927                sizeof(DAC960_V2_DataTransferMemoryAddress_T));
6928         if (DataTransferLength != 0)
6929           {
6930             if (DataTransferLength > 0)
6931               {
6932                 CommandMailbox->Common.CommandControlBits
6933                                       .DataTransferControllerToHost = true;
6934                 CommandMailbox->Common.DataTransferSize = DataTransferLength;
6935               }
6936             else
6937               {
6938                 CommandMailbox->Common.CommandControlBits
6939                                       .DataTransferControllerToHost = false;
6940                 CommandMailbox->Common.DataTransferSize = -DataTransferLength;
6941               }
6942             CommandMailbox->Common.DataTransferMemoryAddress
6943                                   .ScatterGatherSegments[0]
6944                                   .SegmentDataPointer = DataTransferBufferDMA;
6945             CommandMailbox->Common.DataTransferMemoryAddress
6946                                   .ScatterGatherSegments[0]
6947                                   .SegmentByteCount =
6948               CommandMailbox->Common.DataTransferSize;
6949           }
6950         if (RequestSenseLength > 0)
6951           {
6952             CommandMailbox->Common.CommandControlBits
6953                                   .NoAutoRequestSense = false;
6954             CommandMailbox->Common.RequestSenseSize = RequestSenseLength;
6955             CommandMailbox->Common.RequestSenseBusAddress =
6956                                                         RequestSenseBufferDMA;
6957           }
6958         DAC960_ExecuteCommand(Command);
6959         CommandStatus = Command->V2.CommandStatus;
6960         RequestSenseLength = Command->V2.RequestSenseLength;
6961         DataTransferResidue = Command->V2.DataTransferResidue;
6962         spin_lock_irqsave(&Controller->queue_lock, flags);
6963         DAC960_DeallocateCommand(Command);
6964         spin_unlock_irqrestore(&Controller->queue_lock, flags);
6965         if (RequestSenseLength > UserCommand.RequestSenseLength)
6966           RequestSenseLength = UserCommand.RequestSenseLength;
6967         if (copy_to_user(&UserSpaceUserCommand->DataTransferLength,
6968                                  &DataTransferResidue,
6969                                  sizeof(DataTransferResidue))) {
6970                 ErrorCode = -EFAULT;
6971                 goto Failure2;
6972         }
6973         if (copy_to_user(&UserSpaceUserCommand->RequestSenseLength,
6974                          &RequestSenseLength, sizeof(RequestSenseLength))) {
6975                 ErrorCode = -EFAULT;
6976                 goto Failure2;
6977         }
6978         if (DataTransferLength > 0)
6979           {
6980             if (copy_to_user(UserCommand.DataTransferBuffer,
6981                              DataTransferBuffer, DataTransferLength)) {
6982                 ErrorCode = -EFAULT;
6983                 goto Failure2;
6984             }
6985           }
6986         if (RequestSenseLength > 0)
6987           {
6988             if (copy_to_user(UserCommand.RequestSenseBuffer,
6989                              RequestSenseBuffer, RequestSenseLength)) {
6990                 ErrorCode = -EFAULT;
6991                 goto Failure2;
6992             }
6993           }
6994         ErrorCode = CommandStatus;
6995       Failure2:
6996           pci_free_consistent(Controller->PCIDevice, abs(DataTransferLength),
6997                 DataTransferBuffer, DataTransferBufferDMA);
6998         if (RequestSenseBuffer != NULL)
6999           pci_free_consistent(Controller->PCIDevice, RequestSenseLength,
7000                 RequestSenseBuffer, RequestSenseBufferDMA);
7001         break;
7002       }
7003     case DAC960_IOCTL_V2_GET_HEALTH_STATUS:
7004       {
7005         DAC960_V2_GetHealthStatus_T __user *UserSpaceGetHealthStatus =
7006           (DAC960_V2_GetHealthStatus_T __user *) Argument;
7007         DAC960_V2_GetHealthStatus_T GetHealthStatus;
7008         DAC960_V2_HealthStatusBuffer_T HealthStatusBuffer;
7009         DAC960_Controller_T *Controller;
7010         int ControllerNumber;
7011         if (UserSpaceGetHealthStatus == NULL) {
7012                 ErrorCode = -EINVAL;
7013                 break;
7014         }
7015         if (copy_from_user(&GetHealthStatus, UserSpaceGetHealthStatus,
7016                            sizeof(DAC960_V2_GetHealthStatus_T))) {
7017                 ErrorCode = -EFAULT;
7018                 break;
7019         }
7020         ErrorCode = -ENXIO;
7021         ControllerNumber = GetHealthStatus.ControllerNumber;
7022         if (ControllerNumber < 0 ||
7023             ControllerNumber > DAC960_ControllerCount - 1)
7024                     break;
7025         Controller = DAC960_Controllers[ControllerNumber];
7026         if (Controller == NULL)
7027                 break;
7028         if (Controller->FirmwareType != DAC960_V2_Controller) {
7029                 ErrorCode = -EINVAL;
7030                 break;
7031         }
7032         if (copy_from_user(&HealthStatusBuffer,
7033                            GetHealthStatus.HealthStatusBuffer,
7034                            sizeof(DAC960_V2_HealthStatusBuffer_T))) {
7035                 ErrorCode = -EFAULT;
7036                 break;
7037         }
7038         while (Controller->V2.HealthStatusBuffer->StatusChangeCounter
7039                == HealthStatusBuffer.StatusChangeCounter &&
7040                Controller->V2.HealthStatusBuffer->NextEventSequenceNumber
7041                == HealthStatusBuffer.NextEventSequenceNumber)
7042           {
7043             interruptible_sleep_on_timeout(&Controller->HealthStatusWaitQueue,
7044                                            DAC960_MonitoringTimerInterval);
7045             if (signal_pending(current)) {
7046                 ErrorCode = -EINTR;
7047                 break;
7048             }
7049           }
7050         if (copy_to_user(GetHealthStatus.HealthStatusBuffer,
7051                          Controller->V2.HealthStatusBuffer,
7052                          sizeof(DAC960_V2_HealthStatusBuffer_T)))
7053                 ErrorCode = -EFAULT;
7054         else
7055                 ErrorCode =  0;
7056       }
7057       default:
7058         ErrorCode = -ENOTTY;
7059     }
7060   mutex_unlock(&DAC960_mutex);
7061   return ErrorCode;
7062 }
7063
7064 static const struct file_operations DAC960_gam_fops = {
7065         .owner          = THIS_MODULE,
7066         .unlocked_ioctl = DAC960_gam_ioctl,
7067         .llseek         = noop_llseek,
7068 };
7069
7070 static struct miscdevice DAC960_gam_dev = {
7071         DAC960_GAM_MINOR,
7072         "dac960_gam",
7073         &DAC960_gam_fops
7074 };
7075
7076 static int DAC960_gam_init(void)
7077 {
7078         int ret;
7079
7080         ret = misc_register(&DAC960_gam_dev);
7081         if (ret)
7082                 printk(KERN_ERR "DAC960_gam: can't misc_register on minor %d\n", DAC960_GAM_MINOR);
7083         return ret;
7084 }
7085
7086 static void DAC960_gam_cleanup(void)
7087 {
7088         misc_deregister(&DAC960_gam_dev);
7089 }
7090
7091 #endif /* DAC960_GAM_MINOR */
7092
7093 static struct DAC960_privdata DAC960_GEM_privdata = {
7094         .HardwareType =         DAC960_GEM_Controller,
7095         .FirmwareType   =       DAC960_V2_Controller,
7096         .InterruptHandler =     DAC960_GEM_InterruptHandler,
7097         .MemoryWindowSize =     DAC960_GEM_RegisterWindowSize,
7098 };
7099
7100
7101 static struct DAC960_privdata DAC960_BA_privdata = {
7102         .HardwareType =         DAC960_BA_Controller,
7103         .FirmwareType   =       DAC960_V2_Controller,
7104         .InterruptHandler =     DAC960_BA_InterruptHandler,
7105         .MemoryWindowSize =     DAC960_BA_RegisterWindowSize,
7106 };
7107
7108 static struct DAC960_privdata DAC960_LP_privdata = {
7109         .HardwareType =         DAC960_LP_Controller,
7110         .FirmwareType   =       DAC960_V2_Controller,
7111         .InterruptHandler =     DAC960_LP_InterruptHandler,
7112         .MemoryWindowSize =     DAC960_LP_RegisterWindowSize,
7113 };
7114
7115 static struct DAC960_privdata DAC960_LA_privdata = {
7116         .HardwareType =         DAC960_LA_Controller,
7117         .FirmwareType   =       DAC960_V1_Controller,
7118         .InterruptHandler =     DAC960_LA_InterruptHandler,
7119         .MemoryWindowSize =     DAC960_LA_RegisterWindowSize,
7120 };
7121
7122 static struct DAC960_privdata DAC960_PG_privdata = {
7123         .HardwareType =         DAC960_PG_Controller,
7124         .FirmwareType   =       DAC960_V1_Controller,
7125         .InterruptHandler =     DAC960_PG_InterruptHandler,
7126         .MemoryWindowSize =     DAC960_PG_RegisterWindowSize,
7127 };
7128
7129 static struct DAC960_privdata DAC960_PD_privdata = {
7130         .HardwareType =         DAC960_PD_Controller,
7131         .FirmwareType   =       DAC960_V1_Controller,
7132         .InterruptHandler =     DAC960_PD_InterruptHandler,
7133         .MemoryWindowSize =     DAC960_PD_RegisterWindowSize,
7134 };
7135
7136 static struct DAC960_privdata DAC960_P_privdata = {
7137         .HardwareType =         DAC960_P_Controller,
7138         .FirmwareType   =       DAC960_V1_Controller,
7139         .InterruptHandler =     DAC960_P_InterruptHandler,
7140         .MemoryWindowSize =     DAC960_PD_RegisterWindowSize,
7141 };
7142
7143 static const struct pci_device_id DAC960_id_table[] = {
7144         {
7145                 .vendor         = PCI_VENDOR_ID_MYLEX,
7146                 .device         = PCI_DEVICE_ID_MYLEX_DAC960_GEM,
7147                 .subvendor      = PCI_VENDOR_ID_MYLEX,
7148                 .subdevice      = PCI_ANY_ID,
7149                 .driver_data    = (unsigned long) &DAC960_GEM_privdata,
7150         },
7151         {
7152                 .vendor         = PCI_VENDOR_ID_MYLEX,
7153                 .device         = PCI_DEVICE_ID_MYLEX_DAC960_BA,
7154                 .subvendor      = PCI_ANY_ID,
7155                 .subdevice      = PCI_ANY_ID,
7156                 .driver_data    = (unsigned long) &DAC960_BA_privdata,
7157         },
7158         {
7159                 .vendor         = PCI_VENDOR_ID_MYLEX,
7160                 .device         = PCI_DEVICE_ID_MYLEX_DAC960_LP,
7161                 .subvendor      = PCI_ANY_ID,
7162                 .subdevice      = PCI_ANY_ID,
7163                 .driver_data    = (unsigned long) &DAC960_LP_privdata,
7164         },
7165         {
7166                 .vendor         = PCI_VENDOR_ID_DEC,
7167                 .device         = PCI_DEVICE_ID_DEC_21285,
7168                 .subvendor      = PCI_VENDOR_ID_MYLEX,
7169                 .subdevice      = PCI_DEVICE_ID_MYLEX_DAC960_LA,
7170                 .driver_data    = (unsigned long) &DAC960_LA_privdata,
7171         },
7172         {
7173                 .vendor         = PCI_VENDOR_ID_MYLEX,
7174                 .device         = PCI_DEVICE_ID_MYLEX_DAC960_PG,
7175                 .subvendor      = PCI_ANY_ID,
7176                 .subdevice      = PCI_ANY_ID,
7177                 .driver_data    = (unsigned long) &DAC960_PG_privdata,
7178         },
7179         {
7180                 .vendor         = PCI_VENDOR_ID_MYLEX,
7181                 .device         = PCI_DEVICE_ID_MYLEX_DAC960_PD,
7182                 .subvendor      = PCI_ANY_ID,
7183                 .subdevice      = PCI_ANY_ID,
7184                 .driver_data    = (unsigned long) &DAC960_PD_privdata,
7185         },
7186         {
7187                 .vendor         = PCI_VENDOR_ID_MYLEX,
7188                 .device         = PCI_DEVICE_ID_MYLEX_DAC960_P,
7189                 .subvendor      = PCI_ANY_ID,
7190                 .subdevice      = PCI_ANY_ID,
7191                 .driver_data    = (unsigned long) &DAC960_P_privdata,
7192         },
7193         {0, },
7194 };
7195
7196 MODULE_DEVICE_TABLE(pci, DAC960_id_table);
7197
7198 static struct pci_driver DAC960_pci_driver = {
7199         .name           = "DAC960",
7200         .id_table       = DAC960_id_table,
7201         .probe          = DAC960_Probe,
7202         .remove         = DAC960_Remove,
7203 };
7204
7205 static int __init DAC960_init_module(void)
7206 {
7207         int ret;
7208
7209         ret =  pci_register_driver(&DAC960_pci_driver);
7210 #ifdef DAC960_GAM_MINOR
7211         if (!ret)
7212                 DAC960_gam_init();
7213 #endif
7214         return ret;
7215 }
7216
7217 static void __exit DAC960_cleanup_module(void)
7218 {
7219         int i;
7220
7221 #ifdef DAC960_GAM_MINOR
7222         DAC960_gam_cleanup();
7223 #endif
7224
7225         for (i = 0; i < DAC960_ControllerCount; i++) {
7226                 DAC960_Controller_T *Controller = DAC960_Controllers[i];
7227                 if (Controller == NULL)
7228                         continue;
7229                 DAC960_FinalizeController(Controller);
7230         }
7231         if (DAC960_ProcDirectoryEntry != NULL) {
7232                 remove_proc_entry("rd/status", NULL);
7233                 remove_proc_entry("rd", NULL);
7234         }
7235         DAC960_ControllerCount = 0;
7236         pci_unregister_driver(&DAC960_pci_driver);
7237 }
7238
7239 module_init(DAC960_init_module);
7240 module_exit(DAC960_cleanup_module);
7241
7242 MODULE_LICENSE("GPL");