PM / x86: Save/restore MISC_ENABLE register
[pandora-kernel.git] / drivers / ata / sata_sil24.c
1 /*
2  * sata_sil24.c - Driver for Silicon Image 3124/3132 SATA-2 controllers
3  *
4  * Copyright 2005  Tejun Heo
5  *
6  * Based on preview driver from Silicon Image.
7  *
8  * This program is free software; you can redistribute it and/or modify it
9  * under the terms of the GNU General Public License as published by the
10  * Free Software Foundation; either version 2, or (at your option) any
11  * later version.
12  *
13  * This program is distributed in the hope that it will be useful, but
14  * WITHOUT ANY WARRANTY; without even the implied warranty of
15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
16  * General Public License for more details.
17  *
18  */
19
20 #include <linux/kernel.h>
21 #include <linux/module.h>
22 #include <linux/gfp.h>
23 #include <linux/pci.h>
24 #include <linux/blkdev.h>
25 #include <linux/delay.h>
26 #include <linux/interrupt.h>
27 #include <linux/dma-mapping.h>
28 #include <linux/device.h>
29 #include <scsi/scsi_host.h>
30 #include <scsi/scsi_cmnd.h>
31 #include <linux/libata.h>
32
33 #define DRV_NAME        "sata_sil24"
34 #define DRV_VERSION     "1.1"
35
36 /*
37  * Port request block (PRB) 32 bytes
38  */
39 struct sil24_prb {
40         __le16  ctrl;
41         __le16  prot;
42         __le32  rx_cnt;
43         u8      fis[6 * 4];
44 };
45
46 /*
47  * Scatter gather entry (SGE) 16 bytes
48  */
49 struct sil24_sge {
50         __le64  addr;
51         __le32  cnt;
52         __le32  flags;
53 };
54
55
56 enum {
57         SIL24_HOST_BAR          = 0,
58         SIL24_PORT_BAR          = 2,
59
60         /* sil24 fetches in chunks of 64bytes.  The first block
61          * contains the PRB and two SGEs.  From the second block, it's
62          * consisted of four SGEs and called SGT.  Calculate the
63          * number of SGTs that fit into one page.
64          */
65         SIL24_PRB_SZ            = sizeof(struct sil24_prb)
66                                   + 2 * sizeof(struct sil24_sge),
67         SIL24_MAX_SGT           = (PAGE_SIZE - SIL24_PRB_SZ)
68                                   / (4 * sizeof(struct sil24_sge)),
69
70         /* This will give us one unused SGEs for ATA.  This extra SGE
71          * will be used to store CDB for ATAPI devices.
72          */
73         SIL24_MAX_SGE           = 4 * SIL24_MAX_SGT + 1,
74
75         /*
76          * Global controller registers (128 bytes @ BAR0)
77          */
78                 /* 32 bit regs */
79         HOST_SLOT_STAT          = 0x00, /* 32 bit slot stat * 4 */
80         HOST_CTRL               = 0x40,
81         HOST_IRQ_STAT           = 0x44,
82         HOST_PHY_CFG            = 0x48,
83         HOST_BIST_CTRL          = 0x50,
84         HOST_BIST_PTRN          = 0x54,
85         HOST_BIST_STAT          = 0x58,
86         HOST_MEM_BIST_STAT      = 0x5c,
87         HOST_FLASH_CMD          = 0x70,
88                 /* 8 bit regs */
89         HOST_FLASH_DATA         = 0x74,
90         HOST_TRANSITION_DETECT  = 0x75,
91         HOST_GPIO_CTRL          = 0x76,
92         HOST_I2C_ADDR           = 0x78, /* 32 bit */
93         HOST_I2C_DATA           = 0x7c,
94         HOST_I2C_XFER_CNT       = 0x7e,
95         HOST_I2C_CTRL           = 0x7f,
96
97         /* HOST_SLOT_STAT bits */
98         HOST_SSTAT_ATTN         = (1 << 31),
99
100         /* HOST_CTRL bits */
101         HOST_CTRL_M66EN         = (1 << 16), /* M66EN PCI bus signal */
102         HOST_CTRL_TRDY          = (1 << 17), /* latched PCI TRDY */
103         HOST_CTRL_STOP          = (1 << 18), /* latched PCI STOP */
104         HOST_CTRL_DEVSEL        = (1 << 19), /* latched PCI DEVSEL */
105         HOST_CTRL_REQ64         = (1 << 20), /* latched PCI REQ64 */
106         HOST_CTRL_GLOBAL_RST    = (1 << 31), /* global reset */
107
108         /*
109          * Port registers
110          * (8192 bytes @ +0x0000, +0x2000, +0x4000 and +0x6000 @ BAR2)
111          */
112         PORT_REGS_SIZE          = 0x2000,
113
114         PORT_LRAM               = 0x0000, /* 31 LRAM slots and PMP regs */
115         PORT_LRAM_SLOT_SZ       = 0x0080, /* 32 bytes PRB + 2 SGE, ACT... */
116
117         PORT_PMP                = 0x0f80, /* 8 bytes PMP * 16 (128 bytes) */
118         PORT_PMP_STATUS         = 0x0000, /* port device status offset */
119         PORT_PMP_QACTIVE        = 0x0004, /* port device QActive offset */
120         PORT_PMP_SIZE           = 0x0008, /* 8 bytes per PMP */
121
122                 /* 32 bit regs */
123         PORT_CTRL_STAT          = 0x1000, /* write: ctrl-set, read: stat */
124         PORT_CTRL_CLR           = 0x1004, /* write: ctrl-clear */
125         PORT_IRQ_STAT           = 0x1008, /* high: status, low: interrupt */
126         PORT_IRQ_ENABLE_SET     = 0x1010, /* write: enable-set */
127         PORT_IRQ_ENABLE_CLR     = 0x1014, /* write: enable-clear */
128         PORT_ACTIVATE_UPPER_ADDR= 0x101c,
129         PORT_EXEC_FIFO          = 0x1020, /* command execution fifo */
130         PORT_CMD_ERR            = 0x1024, /* command error number */
131         PORT_FIS_CFG            = 0x1028,
132         PORT_FIFO_THRES         = 0x102c,
133                 /* 16 bit regs */
134         PORT_DECODE_ERR_CNT     = 0x1040,
135         PORT_DECODE_ERR_THRESH  = 0x1042,
136         PORT_CRC_ERR_CNT        = 0x1044,
137         PORT_CRC_ERR_THRESH     = 0x1046,
138         PORT_HSHK_ERR_CNT       = 0x1048,
139         PORT_HSHK_ERR_THRESH    = 0x104a,
140                 /* 32 bit regs */
141         PORT_PHY_CFG            = 0x1050,
142         PORT_SLOT_STAT          = 0x1800,
143         PORT_CMD_ACTIVATE       = 0x1c00, /* 64 bit cmd activate * 31 (248 bytes) */
144         PORT_CONTEXT            = 0x1e04,
145         PORT_EXEC_DIAG          = 0x1e00, /* 32bit exec diag * 16 (64 bytes, 0-10 used on 3124) */
146         PORT_PSD_DIAG           = 0x1e40, /* 32bit psd diag * 16 (64 bytes, 0-8 used on 3124) */
147         PORT_SCONTROL           = 0x1f00,
148         PORT_SSTATUS            = 0x1f04,
149         PORT_SERROR             = 0x1f08,
150         PORT_SACTIVE            = 0x1f0c,
151
152         /* PORT_CTRL_STAT bits */
153         PORT_CS_PORT_RST        = (1 << 0), /* port reset */
154         PORT_CS_DEV_RST         = (1 << 1), /* device reset */
155         PORT_CS_INIT            = (1 << 2), /* port initialize */
156         PORT_CS_IRQ_WOC         = (1 << 3), /* interrupt write one to clear */
157         PORT_CS_CDB16           = (1 << 5), /* 0=12b cdb, 1=16b cdb */
158         PORT_CS_PMP_RESUME      = (1 << 6), /* PMP resume */
159         PORT_CS_32BIT_ACTV      = (1 << 10), /* 32-bit activation */
160         PORT_CS_PMP_EN          = (1 << 13), /* port multiplier enable */
161         PORT_CS_RDY             = (1 << 31), /* port ready to accept commands */
162
163         /* PORT_IRQ_STAT/ENABLE_SET/CLR */
164         /* bits[11:0] are masked */
165         PORT_IRQ_COMPLETE       = (1 << 0), /* command(s) completed */
166         PORT_IRQ_ERROR          = (1 << 1), /* command execution error */
167         PORT_IRQ_PORTRDY_CHG    = (1 << 2), /* port ready change */
168         PORT_IRQ_PWR_CHG        = (1 << 3), /* power management change */
169         PORT_IRQ_PHYRDY_CHG     = (1 << 4), /* PHY ready change */
170         PORT_IRQ_COMWAKE        = (1 << 5), /* COMWAKE received */
171         PORT_IRQ_UNK_FIS        = (1 << 6), /* unknown FIS received */
172         PORT_IRQ_DEV_XCHG       = (1 << 7), /* device exchanged */
173         PORT_IRQ_8B10B          = (1 << 8), /* 8b/10b decode error threshold */
174         PORT_IRQ_CRC            = (1 << 9), /* CRC error threshold */
175         PORT_IRQ_HANDSHAKE      = (1 << 10), /* handshake error threshold */
176         PORT_IRQ_SDB_NOTIFY     = (1 << 11), /* SDB notify received */
177
178         DEF_PORT_IRQ            = PORT_IRQ_COMPLETE | PORT_IRQ_ERROR |
179                                   PORT_IRQ_PHYRDY_CHG | PORT_IRQ_DEV_XCHG |
180                                   PORT_IRQ_UNK_FIS | PORT_IRQ_SDB_NOTIFY,
181
182         /* bits[27:16] are unmasked (raw) */
183         PORT_IRQ_RAW_SHIFT      = 16,
184         PORT_IRQ_MASKED_MASK    = 0x7ff,
185         PORT_IRQ_RAW_MASK       = (0x7ff << PORT_IRQ_RAW_SHIFT),
186
187         /* ENABLE_SET/CLR specific, intr steering - 2 bit field */
188         PORT_IRQ_STEER_SHIFT    = 30,
189         PORT_IRQ_STEER_MASK     = (3 << PORT_IRQ_STEER_SHIFT),
190
191         /* PORT_CMD_ERR constants */
192         PORT_CERR_DEV           = 1, /* Error bit in D2H Register FIS */
193         PORT_CERR_SDB           = 2, /* Error bit in SDB FIS */
194         PORT_CERR_DATA          = 3, /* Error in data FIS not detected by dev */
195         PORT_CERR_SEND          = 4, /* Initial cmd FIS transmission failure */
196         PORT_CERR_INCONSISTENT  = 5, /* Protocol mismatch */
197         PORT_CERR_DIRECTION     = 6, /* Data direction mismatch */
198         PORT_CERR_UNDERRUN      = 7, /* Ran out of SGEs while writing */
199         PORT_CERR_OVERRUN       = 8, /* Ran out of SGEs while reading */
200         PORT_CERR_PKT_PROT      = 11, /* DIR invalid in 1st PIO setup of ATAPI */
201         PORT_CERR_SGT_BOUNDARY  = 16, /* PLD ecode 00 - SGT not on qword boundary */
202         PORT_CERR_SGT_TGTABRT   = 17, /* PLD ecode 01 - target abort */
203         PORT_CERR_SGT_MSTABRT   = 18, /* PLD ecode 10 - master abort */
204         PORT_CERR_SGT_PCIPERR   = 19, /* PLD ecode 11 - PCI parity err while fetching SGT */
205         PORT_CERR_CMD_BOUNDARY  = 24, /* ctrl[15:13] 001 - PRB not on qword boundary */
206         PORT_CERR_CMD_TGTABRT   = 25, /* ctrl[15:13] 010 - target abort */
207         PORT_CERR_CMD_MSTABRT   = 26, /* ctrl[15:13] 100 - master abort */
208         PORT_CERR_CMD_PCIPERR   = 27, /* ctrl[15:13] 110 - PCI parity err while fetching PRB */
209         PORT_CERR_XFR_UNDEF     = 32, /* PSD ecode 00 - undefined */
210         PORT_CERR_XFR_TGTABRT   = 33, /* PSD ecode 01 - target abort */
211         PORT_CERR_XFR_MSTABRT   = 34, /* PSD ecode 10 - master abort */
212         PORT_CERR_XFR_PCIPERR   = 35, /* PSD ecode 11 - PCI prity err during transfer */
213         PORT_CERR_SENDSERVICE   = 36, /* FIS received while sending service */
214
215         /* bits of PRB control field */
216         PRB_CTRL_PROTOCOL       = (1 << 0), /* override def. ATA protocol */
217         PRB_CTRL_PACKET_READ    = (1 << 4), /* PACKET cmd read */
218         PRB_CTRL_PACKET_WRITE   = (1 << 5), /* PACKET cmd write */
219         PRB_CTRL_NIEN           = (1 << 6), /* Mask completion irq */
220         PRB_CTRL_SRST           = (1 << 7), /* Soft reset request (ign BSY?) */
221
222         /* PRB protocol field */
223         PRB_PROT_PACKET         = (1 << 0),
224         PRB_PROT_TCQ            = (1 << 1),
225         PRB_PROT_NCQ            = (1 << 2),
226         PRB_PROT_READ           = (1 << 3),
227         PRB_PROT_WRITE          = (1 << 4),
228         PRB_PROT_TRANSPARENT    = (1 << 5),
229
230         /*
231          * Other constants
232          */
233         SGE_TRM                 = (1 << 31), /* Last SGE in chain */
234         SGE_LNK                 = (1 << 30), /* linked list
235                                                 Points to SGT, not SGE */
236         SGE_DRD                 = (1 << 29), /* discard data read (/dev/null)
237                                                 data address ignored */
238
239         SIL24_MAX_CMDS          = 31,
240
241         /* board id */
242         BID_SIL3124             = 0,
243         BID_SIL3132             = 1,
244         BID_SIL3131             = 2,
245
246         /* host flags */
247         SIL24_COMMON_FLAGS      = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
248                                   ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA |
249                                   ATA_FLAG_NCQ | ATA_FLAG_ACPI_SATA |
250                                   ATA_FLAG_AN | ATA_FLAG_PMP,
251         SIL24_FLAG_PCIX_IRQ_WOC = (1 << 24), /* IRQ loss errata on PCI-X */
252
253         IRQ_STAT_4PORTS         = 0xf,
254 };
255
256 struct sil24_ata_block {
257         struct sil24_prb prb;
258         struct sil24_sge sge[SIL24_MAX_SGE];
259 };
260
261 struct sil24_atapi_block {
262         struct sil24_prb prb;
263         u8 cdb[16];
264         struct sil24_sge sge[SIL24_MAX_SGE];
265 };
266
267 union sil24_cmd_block {
268         struct sil24_ata_block ata;
269         struct sil24_atapi_block atapi;
270 };
271
272 static struct sil24_cerr_info {
273         unsigned int err_mask, action;
274         const char *desc;
275 } sil24_cerr_db[] = {
276         [0]                     = { AC_ERR_DEV, 0,
277                                     "device error" },
278         [PORT_CERR_DEV]         = { AC_ERR_DEV, 0,
279                                     "device error via D2H FIS" },
280         [PORT_CERR_SDB]         = { AC_ERR_DEV, 0,
281                                     "device error via SDB FIS" },
282         [PORT_CERR_DATA]        = { AC_ERR_ATA_BUS, ATA_EH_RESET,
283                                     "error in data FIS" },
284         [PORT_CERR_SEND]        = { AC_ERR_ATA_BUS, ATA_EH_RESET,
285                                     "failed to transmit command FIS" },
286         [PORT_CERR_INCONSISTENT] = { AC_ERR_HSM, ATA_EH_RESET,
287                                      "protocol mismatch" },
288         [PORT_CERR_DIRECTION]   = { AC_ERR_HSM, ATA_EH_RESET,
289                                     "data directon mismatch" },
290         [PORT_CERR_UNDERRUN]    = { AC_ERR_HSM, ATA_EH_RESET,
291                                     "ran out of SGEs while writing" },
292         [PORT_CERR_OVERRUN]     = { AC_ERR_HSM, ATA_EH_RESET,
293                                     "ran out of SGEs while reading" },
294         [PORT_CERR_PKT_PROT]    = { AC_ERR_HSM, ATA_EH_RESET,
295                                     "invalid data directon for ATAPI CDB" },
296         [PORT_CERR_SGT_BOUNDARY] = { AC_ERR_SYSTEM, ATA_EH_RESET,
297                                      "SGT not on qword boundary" },
298         [PORT_CERR_SGT_TGTABRT] = { AC_ERR_HOST_BUS, ATA_EH_RESET,
299                                     "PCI target abort while fetching SGT" },
300         [PORT_CERR_SGT_MSTABRT] = { AC_ERR_HOST_BUS, ATA_EH_RESET,
301                                     "PCI master abort while fetching SGT" },
302         [PORT_CERR_SGT_PCIPERR] = { AC_ERR_HOST_BUS, ATA_EH_RESET,
303                                     "PCI parity error while fetching SGT" },
304         [PORT_CERR_CMD_BOUNDARY] = { AC_ERR_SYSTEM, ATA_EH_RESET,
305                                      "PRB not on qword boundary" },
306         [PORT_CERR_CMD_TGTABRT] = { AC_ERR_HOST_BUS, ATA_EH_RESET,
307                                     "PCI target abort while fetching PRB" },
308         [PORT_CERR_CMD_MSTABRT] = { AC_ERR_HOST_BUS, ATA_EH_RESET,
309                                     "PCI master abort while fetching PRB" },
310         [PORT_CERR_CMD_PCIPERR] = { AC_ERR_HOST_BUS, ATA_EH_RESET,
311                                     "PCI parity error while fetching PRB" },
312         [PORT_CERR_XFR_UNDEF]   = { AC_ERR_HOST_BUS, ATA_EH_RESET,
313                                     "undefined error while transferring data" },
314         [PORT_CERR_XFR_TGTABRT] = { AC_ERR_HOST_BUS, ATA_EH_RESET,
315                                     "PCI target abort while transferring data" },
316         [PORT_CERR_XFR_MSTABRT] = { AC_ERR_HOST_BUS, ATA_EH_RESET,
317                                     "PCI master abort while transferring data" },
318         [PORT_CERR_XFR_PCIPERR] = { AC_ERR_HOST_BUS, ATA_EH_RESET,
319                                     "PCI parity error while transferring data" },
320         [PORT_CERR_SENDSERVICE] = { AC_ERR_HSM, ATA_EH_RESET,
321                                     "FIS received while sending service FIS" },
322 };
323
324 /*
325  * ap->private_data
326  *
327  * The preview driver always returned 0 for status.  We emulate it
328  * here from the previous interrupt.
329  */
330 struct sil24_port_priv {
331         union sil24_cmd_block *cmd_block;       /* 32 cmd blocks */
332         dma_addr_t cmd_block_dma;               /* DMA base addr for them */
333         int do_port_rst;
334 };
335
336 static void sil24_dev_config(struct ata_device *dev);
337 static int sil24_scr_read(struct ata_link *link, unsigned sc_reg, u32 *val);
338 static int sil24_scr_write(struct ata_link *link, unsigned sc_reg, u32 val);
339 static int sil24_qc_defer(struct ata_queued_cmd *qc);
340 static void sil24_qc_prep(struct ata_queued_cmd *qc);
341 static unsigned int sil24_qc_issue(struct ata_queued_cmd *qc);
342 static bool sil24_qc_fill_rtf(struct ata_queued_cmd *qc);
343 static void sil24_pmp_attach(struct ata_port *ap);
344 static void sil24_pmp_detach(struct ata_port *ap);
345 static void sil24_freeze(struct ata_port *ap);
346 static void sil24_thaw(struct ata_port *ap);
347 static int sil24_softreset(struct ata_link *link, unsigned int *class,
348                            unsigned long deadline);
349 static int sil24_hardreset(struct ata_link *link, unsigned int *class,
350                            unsigned long deadline);
351 static int sil24_pmp_hardreset(struct ata_link *link, unsigned int *class,
352                                unsigned long deadline);
353 static void sil24_error_handler(struct ata_port *ap);
354 static void sil24_post_internal_cmd(struct ata_queued_cmd *qc);
355 static int sil24_port_start(struct ata_port *ap);
356 static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
357 #ifdef CONFIG_PM
358 static int sil24_pci_device_resume(struct pci_dev *pdev);
359 static int sil24_port_resume(struct ata_port *ap);
360 #endif
361
362 static const struct pci_device_id sil24_pci_tbl[] = {
363         { PCI_VDEVICE(CMD, 0x3124), BID_SIL3124 },
364         { PCI_VDEVICE(INTEL, 0x3124), BID_SIL3124 },
365         { PCI_VDEVICE(CMD, 0x3132), BID_SIL3132 },
366         { PCI_VDEVICE(CMD, 0x0242), BID_SIL3132 },
367         { PCI_VDEVICE(CMD, 0x0244), BID_SIL3132 },
368         { PCI_VDEVICE(CMD, 0x3131), BID_SIL3131 },
369         { PCI_VDEVICE(CMD, 0x3531), BID_SIL3131 },
370
371         { } /* terminate list */
372 };
373
374 static struct pci_driver sil24_pci_driver = {
375         .name                   = DRV_NAME,
376         .id_table               = sil24_pci_tbl,
377         .probe                  = sil24_init_one,
378         .remove                 = ata_pci_remove_one,
379 #ifdef CONFIG_PM
380         .suspend                = ata_pci_device_suspend,
381         .resume                 = sil24_pci_device_resume,
382 #endif
383 };
384
385 static struct scsi_host_template sil24_sht = {
386         ATA_NCQ_SHT(DRV_NAME),
387         .can_queue              = SIL24_MAX_CMDS,
388         .sg_tablesize           = SIL24_MAX_SGE,
389         .dma_boundary           = ATA_DMA_BOUNDARY,
390 };
391
392 static struct ata_port_operations sil24_ops = {
393         .inherits               = &sata_pmp_port_ops,
394
395         .qc_defer               = sil24_qc_defer,
396         .qc_prep                = sil24_qc_prep,
397         .qc_issue               = sil24_qc_issue,
398         .qc_fill_rtf            = sil24_qc_fill_rtf,
399
400         .freeze                 = sil24_freeze,
401         .thaw                   = sil24_thaw,
402         .softreset              = sil24_softreset,
403         .hardreset              = sil24_hardreset,
404         .pmp_softreset          = sil24_softreset,
405         .pmp_hardreset          = sil24_pmp_hardreset,
406         .error_handler          = sil24_error_handler,
407         .post_internal_cmd      = sil24_post_internal_cmd,
408         .dev_config             = sil24_dev_config,
409
410         .scr_read               = sil24_scr_read,
411         .scr_write              = sil24_scr_write,
412         .pmp_attach             = sil24_pmp_attach,
413         .pmp_detach             = sil24_pmp_detach,
414
415         .port_start             = sil24_port_start,
416 #ifdef CONFIG_PM
417         .port_resume            = sil24_port_resume,
418 #endif
419 };
420
421 static int sata_sil24_msi;    /* Disable MSI */
422 module_param_named(msi, sata_sil24_msi, bool, S_IRUGO);
423 MODULE_PARM_DESC(msi, "Enable MSI (Default: false)");
424
425 /*
426  * Use bits 30-31 of port_flags to encode available port numbers.
427  * Current maxium is 4.
428  */
429 #define SIL24_NPORTS2FLAG(nports)       ((((unsigned)(nports) - 1) & 0x3) << 30)
430 #define SIL24_FLAG2NPORTS(flag)         ((((flag) >> 30) & 0x3) + 1)
431
432 static const struct ata_port_info sil24_port_info[] = {
433         /* sil_3124 */
434         {
435                 .flags          = SIL24_COMMON_FLAGS | SIL24_NPORTS2FLAG(4) |
436                                   SIL24_FLAG_PCIX_IRQ_WOC,
437                 .pio_mask       = ATA_PIO4,
438                 .mwdma_mask     = ATA_MWDMA2,
439                 .udma_mask      = ATA_UDMA5,
440                 .port_ops       = &sil24_ops,
441         },
442         /* sil_3132 */
443         {
444                 .flags          = SIL24_COMMON_FLAGS | SIL24_NPORTS2FLAG(2),
445                 .pio_mask       = ATA_PIO4,
446                 .mwdma_mask     = ATA_MWDMA2,
447                 .udma_mask      = ATA_UDMA5,
448                 .port_ops       = &sil24_ops,
449         },
450         /* sil_3131/sil_3531 */
451         {
452                 .flags          = SIL24_COMMON_FLAGS | SIL24_NPORTS2FLAG(1),
453                 .pio_mask       = ATA_PIO4,
454                 .mwdma_mask     = ATA_MWDMA2,
455                 .udma_mask      = ATA_UDMA5,
456                 .port_ops       = &sil24_ops,
457         },
458 };
459
460 static int sil24_tag(int tag)
461 {
462         if (unlikely(ata_tag_internal(tag)))
463                 return 0;
464         return tag;
465 }
466
467 static unsigned long sil24_port_offset(struct ata_port *ap)
468 {
469         return ap->port_no * PORT_REGS_SIZE;
470 }
471
472 static void __iomem *sil24_port_base(struct ata_port *ap)
473 {
474         return ap->host->iomap[SIL24_PORT_BAR] + sil24_port_offset(ap);
475 }
476
477 static void sil24_dev_config(struct ata_device *dev)
478 {
479         void __iomem *port = sil24_port_base(dev->link->ap);
480
481         if (dev->cdb_len == 16)
482                 writel(PORT_CS_CDB16, port + PORT_CTRL_STAT);
483         else
484                 writel(PORT_CS_CDB16, port + PORT_CTRL_CLR);
485 }
486
487 static void sil24_read_tf(struct ata_port *ap, int tag, struct ata_taskfile *tf)
488 {
489         void __iomem *port = sil24_port_base(ap);
490         struct sil24_prb __iomem *prb;
491         u8 fis[6 * 4];
492
493         prb = port + PORT_LRAM + sil24_tag(tag) * PORT_LRAM_SLOT_SZ;
494         memcpy_fromio(fis, prb->fis, sizeof(fis));
495         ata_tf_from_fis(fis, tf);
496 }
497
498 static int sil24_scr_map[] = {
499         [SCR_CONTROL]   = 0,
500         [SCR_STATUS]    = 1,
501         [SCR_ERROR]     = 2,
502         [SCR_ACTIVE]    = 3,
503 };
504
505 static int sil24_scr_read(struct ata_link *link, unsigned sc_reg, u32 *val)
506 {
507         void __iomem *scr_addr = sil24_port_base(link->ap) + PORT_SCONTROL;
508
509         if (sc_reg < ARRAY_SIZE(sil24_scr_map)) {
510                 void __iomem *addr;
511                 addr = scr_addr + sil24_scr_map[sc_reg] * 4;
512                 *val = readl(scr_addr + sil24_scr_map[sc_reg] * 4);
513                 return 0;
514         }
515         return -EINVAL;
516 }
517
518 static int sil24_scr_write(struct ata_link *link, unsigned sc_reg, u32 val)
519 {
520         void __iomem *scr_addr = sil24_port_base(link->ap) + PORT_SCONTROL;
521
522         if (sc_reg < ARRAY_SIZE(sil24_scr_map)) {
523                 void __iomem *addr;
524                 addr = scr_addr + sil24_scr_map[sc_reg] * 4;
525                 writel(val, scr_addr + sil24_scr_map[sc_reg] * 4);
526                 return 0;
527         }
528         return -EINVAL;
529 }
530
531 static void sil24_config_port(struct ata_port *ap)
532 {
533         void __iomem *port = sil24_port_base(ap);
534
535         /* configure IRQ WoC */
536         if (ap->flags & SIL24_FLAG_PCIX_IRQ_WOC)
537                 writel(PORT_CS_IRQ_WOC, port + PORT_CTRL_STAT);
538         else
539                 writel(PORT_CS_IRQ_WOC, port + PORT_CTRL_CLR);
540
541         /* zero error counters. */
542         writel(0x8000, port + PORT_DECODE_ERR_THRESH);
543         writel(0x8000, port + PORT_CRC_ERR_THRESH);
544         writel(0x8000, port + PORT_HSHK_ERR_THRESH);
545         writel(0x0000, port + PORT_DECODE_ERR_CNT);
546         writel(0x0000, port + PORT_CRC_ERR_CNT);
547         writel(0x0000, port + PORT_HSHK_ERR_CNT);
548
549         /* always use 64bit activation */
550         writel(PORT_CS_32BIT_ACTV, port + PORT_CTRL_CLR);
551
552         /* clear port multiplier enable and resume bits */
553         writel(PORT_CS_PMP_EN | PORT_CS_PMP_RESUME, port + PORT_CTRL_CLR);
554 }
555
556 static void sil24_config_pmp(struct ata_port *ap, int attached)
557 {
558         void __iomem *port = sil24_port_base(ap);
559
560         if (attached)
561                 writel(PORT_CS_PMP_EN, port + PORT_CTRL_STAT);
562         else
563                 writel(PORT_CS_PMP_EN, port + PORT_CTRL_CLR);
564 }
565
566 static void sil24_clear_pmp(struct ata_port *ap)
567 {
568         void __iomem *port = sil24_port_base(ap);
569         int i;
570
571         writel(PORT_CS_PMP_RESUME, port + PORT_CTRL_CLR);
572
573         for (i = 0; i < SATA_PMP_MAX_PORTS; i++) {
574                 void __iomem *pmp_base = port + PORT_PMP + i * PORT_PMP_SIZE;
575
576                 writel(0, pmp_base + PORT_PMP_STATUS);
577                 writel(0, pmp_base + PORT_PMP_QACTIVE);
578         }
579 }
580
581 static int sil24_init_port(struct ata_port *ap)
582 {
583         void __iomem *port = sil24_port_base(ap);
584         struct sil24_port_priv *pp = ap->private_data;
585         u32 tmp;
586
587         /* clear PMP error status */
588         if (sata_pmp_attached(ap))
589                 sil24_clear_pmp(ap);
590
591         writel(PORT_CS_INIT, port + PORT_CTRL_STAT);
592         ata_wait_register(port + PORT_CTRL_STAT,
593                           PORT_CS_INIT, PORT_CS_INIT, 10, 100);
594         tmp = ata_wait_register(port + PORT_CTRL_STAT,
595                                 PORT_CS_RDY, 0, 10, 100);
596
597         if ((tmp & (PORT_CS_INIT | PORT_CS_RDY)) != PORT_CS_RDY) {
598                 pp->do_port_rst = 1;
599                 ap->link.eh_context.i.action |= ATA_EH_RESET;
600                 return -EIO;
601         }
602
603         return 0;
604 }
605
606 static int sil24_exec_polled_cmd(struct ata_port *ap, int pmp,
607                                  const struct ata_taskfile *tf,
608                                  int is_cmd, u32 ctrl,
609                                  unsigned long timeout_msec)
610 {
611         void __iomem *port = sil24_port_base(ap);
612         struct sil24_port_priv *pp = ap->private_data;
613         struct sil24_prb *prb = &pp->cmd_block[0].ata.prb;
614         dma_addr_t paddr = pp->cmd_block_dma;
615         u32 irq_enabled, irq_mask, irq_stat;
616         int rc;
617
618         prb->ctrl = cpu_to_le16(ctrl);
619         ata_tf_to_fis(tf, pmp, is_cmd, prb->fis);
620
621         /* temporarily plug completion and error interrupts */
622         irq_enabled = readl(port + PORT_IRQ_ENABLE_SET);
623         writel(PORT_IRQ_COMPLETE | PORT_IRQ_ERROR, port + PORT_IRQ_ENABLE_CLR);
624
625         writel((u32)paddr, port + PORT_CMD_ACTIVATE);
626         writel((u64)paddr >> 32, port + PORT_CMD_ACTIVATE + 4);
627
628         irq_mask = (PORT_IRQ_COMPLETE | PORT_IRQ_ERROR) << PORT_IRQ_RAW_SHIFT;
629         irq_stat = ata_wait_register(port + PORT_IRQ_STAT, irq_mask, 0x0,
630                                      10, timeout_msec);
631
632         writel(irq_mask, port + PORT_IRQ_STAT); /* clear IRQs */
633         irq_stat >>= PORT_IRQ_RAW_SHIFT;
634
635         if (irq_stat & PORT_IRQ_COMPLETE)
636                 rc = 0;
637         else {
638                 /* force port into known state */
639                 sil24_init_port(ap);
640
641                 if (irq_stat & PORT_IRQ_ERROR)
642                         rc = -EIO;
643                 else
644                         rc = -EBUSY;
645         }
646
647         /* restore IRQ enabled */
648         writel(irq_enabled, port + PORT_IRQ_ENABLE_SET);
649
650         return rc;
651 }
652
653 static int sil24_softreset(struct ata_link *link, unsigned int *class,
654                            unsigned long deadline)
655 {
656         struct ata_port *ap = link->ap;
657         int pmp = sata_srst_pmp(link);
658         unsigned long timeout_msec = 0;
659         struct ata_taskfile tf;
660         const char *reason;
661         int rc;
662
663         DPRINTK("ENTER\n");
664
665         /* put the port into known state */
666         if (sil24_init_port(ap)) {
667                 reason = "port not ready";
668                 goto err;
669         }
670
671         /* do SRST */
672         if (time_after(deadline, jiffies))
673                 timeout_msec = jiffies_to_msecs(deadline - jiffies);
674
675         ata_tf_init(link->device, &tf); /* doesn't really matter */
676         rc = sil24_exec_polled_cmd(ap, pmp, &tf, 0, PRB_CTRL_SRST,
677                                    timeout_msec);
678         if (rc == -EBUSY) {
679                 reason = "timeout";
680                 goto err;
681         } else if (rc) {
682                 reason = "SRST command error";
683                 goto err;
684         }
685
686         sil24_read_tf(ap, 0, &tf);
687         *class = ata_dev_classify(&tf);
688
689         DPRINTK("EXIT, class=%u\n", *class);
690         return 0;
691
692  err:
693         ata_link_printk(link, KERN_ERR, "softreset failed (%s)\n", reason);
694         return -EIO;
695 }
696
697 static int sil24_hardreset(struct ata_link *link, unsigned int *class,
698                            unsigned long deadline)
699 {
700         struct ata_port *ap = link->ap;
701         void __iomem *port = sil24_port_base(ap);
702         struct sil24_port_priv *pp = ap->private_data;
703         int did_port_rst = 0;
704         const char *reason;
705         int tout_msec, rc;
706         u32 tmp;
707
708  retry:
709         /* Sometimes, DEV_RST is not enough to recover the controller.
710          * This happens often after PM DMA CS errata.
711          */
712         if (pp->do_port_rst) {
713                 ata_port_printk(ap, KERN_WARNING, "controller in dubious "
714                                 "state, performing PORT_RST\n");
715
716                 writel(PORT_CS_PORT_RST, port + PORT_CTRL_STAT);
717                 msleep(10);
718                 writel(PORT_CS_PORT_RST, port + PORT_CTRL_CLR);
719                 ata_wait_register(port + PORT_CTRL_STAT, PORT_CS_RDY, 0,
720                                   10, 5000);
721
722                 /* restore port configuration */
723                 sil24_config_port(ap);
724                 sil24_config_pmp(ap, ap->nr_pmp_links);
725
726                 pp->do_port_rst = 0;
727                 did_port_rst = 1;
728         }
729
730         /* sil24 does the right thing(tm) without any protection */
731         sata_set_spd(link);
732
733         tout_msec = 100;
734         if (ata_link_online(link))
735                 tout_msec = 5000;
736
737         writel(PORT_CS_DEV_RST, port + PORT_CTRL_STAT);
738         tmp = ata_wait_register(port + PORT_CTRL_STAT,
739                                 PORT_CS_DEV_RST, PORT_CS_DEV_RST, 10,
740                                 tout_msec);
741
742         /* SStatus oscillates between zero and valid status after
743          * DEV_RST, debounce it.
744          */
745         rc = sata_link_debounce(link, sata_deb_timing_long, deadline);
746         if (rc) {
747                 reason = "PHY debouncing failed";
748                 goto err;
749         }
750
751         if (tmp & PORT_CS_DEV_RST) {
752                 if (ata_link_offline(link))
753                         return 0;
754                 reason = "link not ready";
755                 goto err;
756         }
757
758         /* Sil24 doesn't store signature FIS after hardreset, so we
759          * can't wait for BSY to clear.  Some devices take a long time
760          * to get ready and those devices will choke if we don't wait
761          * for BSY clearance here.  Tell libata to perform follow-up
762          * softreset.
763          */
764         return -EAGAIN;
765
766  err:
767         if (!did_port_rst) {
768                 pp->do_port_rst = 1;
769                 goto retry;
770         }
771
772         ata_link_printk(link, KERN_ERR, "hardreset failed (%s)\n", reason);
773         return -EIO;
774 }
775
776 static inline void sil24_fill_sg(struct ata_queued_cmd *qc,
777                                  struct sil24_sge *sge)
778 {
779         struct scatterlist *sg;
780         struct sil24_sge *last_sge = NULL;
781         unsigned int si;
782
783         for_each_sg(qc->sg, sg, qc->n_elem, si) {
784                 sge->addr = cpu_to_le64(sg_dma_address(sg));
785                 sge->cnt = cpu_to_le32(sg_dma_len(sg));
786                 sge->flags = 0;
787
788                 last_sge = sge;
789                 sge++;
790         }
791
792         last_sge->flags = cpu_to_le32(SGE_TRM);
793 }
794
795 static int sil24_qc_defer(struct ata_queued_cmd *qc)
796 {
797         struct ata_link *link = qc->dev->link;
798         struct ata_port *ap = link->ap;
799         u8 prot = qc->tf.protocol;
800
801         /*
802          * There is a bug in the chip:
803          * Port LRAM Causes the PRB/SGT Data to be Corrupted
804          * If the host issues a read request for LRAM and SActive registers
805          * while active commands are available in the port, PRB/SGT data in
806          * the LRAM can become corrupted. This issue applies only when
807          * reading from, but not writing to, the LRAM.
808          *
809          * Therefore, reading LRAM when there is no particular error [and
810          * other commands may be outstanding] is prohibited.
811          *
812          * To avoid this bug there are two situations where a command must run
813          * exclusive of any other commands on the port:
814          *
815          * - ATAPI commands which check the sense data
816          * - Passthrough ATA commands which always have ATA_QCFLAG_RESULT_TF
817          *   set.
818          *
819          */
820         int is_excl = (ata_is_atapi(prot) ||
821                        (qc->flags & ATA_QCFLAG_RESULT_TF));
822
823         if (unlikely(ap->excl_link)) {
824                 if (link == ap->excl_link) {
825                         if (ap->nr_active_links)
826                                 return ATA_DEFER_PORT;
827                         qc->flags |= ATA_QCFLAG_CLEAR_EXCL;
828                 } else
829                         return ATA_DEFER_PORT;
830         } else if (unlikely(is_excl)) {
831                 ap->excl_link = link;
832                 if (ap->nr_active_links)
833                         return ATA_DEFER_PORT;
834                 qc->flags |= ATA_QCFLAG_CLEAR_EXCL;
835         }
836
837         return ata_std_qc_defer(qc);
838 }
839
840 static void sil24_qc_prep(struct ata_queued_cmd *qc)
841 {
842         struct ata_port *ap = qc->ap;
843         struct sil24_port_priv *pp = ap->private_data;
844         union sil24_cmd_block *cb;
845         struct sil24_prb *prb;
846         struct sil24_sge *sge;
847         u16 ctrl = 0;
848
849         cb = &pp->cmd_block[sil24_tag(qc->tag)];
850
851         if (!ata_is_atapi(qc->tf.protocol)) {
852                 prb = &cb->ata.prb;
853                 sge = cb->ata.sge;
854                 if (ata_is_data(qc->tf.protocol)) {
855                         u16 prot = 0;
856                         ctrl = PRB_CTRL_PROTOCOL;
857                         if (ata_is_ncq(qc->tf.protocol))
858                                 prot |= PRB_PROT_NCQ;
859                         if (qc->tf.flags & ATA_TFLAG_WRITE)
860                                 prot |= PRB_PROT_WRITE;
861                         else
862                                 prot |= PRB_PROT_READ;
863                         prb->prot = cpu_to_le16(prot);
864                 }
865         } else {
866                 prb = &cb->atapi.prb;
867                 sge = cb->atapi.sge;
868                 memset(cb->atapi.cdb, 0, 32);
869                 memcpy(cb->atapi.cdb, qc->cdb, qc->dev->cdb_len);
870
871                 if (ata_is_data(qc->tf.protocol)) {
872                         if (qc->tf.flags & ATA_TFLAG_WRITE)
873                                 ctrl = PRB_CTRL_PACKET_WRITE;
874                         else
875                                 ctrl = PRB_CTRL_PACKET_READ;
876                 }
877         }
878
879         prb->ctrl = cpu_to_le16(ctrl);
880         ata_tf_to_fis(&qc->tf, qc->dev->link->pmp, 1, prb->fis);
881
882         if (qc->flags & ATA_QCFLAG_DMAMAP)
883                 sil24_fill_sg(qc, sge);
884 }
885
886 static unsigned int sil24_qc_issue(struct ata_queued_cmd *qc)
887 {
888         struct ata_port *ap = qc->ap;
889         struct sil24_port_priv *pp = ap->private_data;
890         void __iomem *port = sil24_port_base(ap);
891         unsigned int tag = sil24_tag(qc->tag);
892         dma_addr_t paddr;
893         void __iomem *activate;
894
895         paddr = pp->cmd_block_dma + tag * sizeof(*pp->cmd_block);
896         activate = port + PORT_CMD_ACTIVATE + tag * 8;
897
898         writel((u32)paddr, activate);
899         writel((u64)paddr >> 32, activate + 4);
900
901         return 0;
902 }
903
904 static bool sil24_qc_fill_rtf(struct ata_queued_cmd *qc)
905 {
906         sil24_read_tf(qc->ap, qc->tag, &qc->result_tf);
907         return true;
908 }
909
910 static void sil24_pmp_attach(struct ata_port *ap)
911 {
912         u32 *gscr = ap->link.device->gscr;
913
914         sil24_config_pmp(ap, 1);
915         sil24_init_port(ap);
916
917         if (sata_pmp_gscr_vendor(gscr) == 0x11ab &&
918             sata_pmp_gscr_devid(gscr) == 0x4140) {
919                 ata_port_printk(ap, KERN_INFO,
920                         "disabling NCQ support due to sil24-mv4140 quirk\n");
921                 ap->flags &= ~ATA_FLAG_NCQ;
922         }
923 }
924
925 static void sil24_pmp_detach(struct ata_port *ap)
926 {
927         sil24_init_port(ap);
928         sil24_config_pmp(ap, 0);
929
930         ap->flags |= ATA_FLAG_NCQ;
931 }
932
933 static int sil24_pmp_hardreset(struct ata_link *link, unsigned int *class,
934                                unsigned long deadline)
935 {
936         int rc;
937
938         rc = sil24_init_port(link->ap);
939         if (rc) {
940                 ata_link_printk(link, KERN_ERR,
941                                 "hardreset failed (port not ready)\n");
942                 return rc;
943         }
944
945         return sata_std_hardreset(link, class, deadline);
946 }
947
948 static void sil24_freeze(struct ata_port *ap)
949 {
950         void __iomem *port = sil24_port_base(ap);
951
952         /* Port-wide IRQ mask in HOST_CTRL doesn't really work, clear
953          * PORT_IRQ_ENABLE instead.
954          */
955         writel(0xffff, port + PORT_IRQ_ENABLE_CLR);
956 }
957
958 static void sil24_thaw(struct ata_port *ap)
959 {
960         void __iomem *port = sil24_port_base(ap);
961         u32 tmp;
962
963         /* clear IRQ */
964         tmp = readl(port + PORT_IRQ_STAT);
965         writel(tmp, port + PORT_IRQ_STAT);
966
967         /* turn IRQ back on */
968         writel(DEF_PORT_IRQ, port + PORT_IRQ_ENABLE_SET);
969 }
970
971 static void sil24_error_intr(struct ata_port *ap)
972 {
973         void __iomem *port = sil24_port_base(ap);
974         struct sil24_port_priv *pp = ap->private_data;
975         struct ata_queued_cmd *qc = NULL;
976         struct ata_link *link;
977         struct ata_eh_info *ehi;
978         int abort = 0, freeze = 0;
979         u32 irq_stat;
980
981         /* on error, we need to clear IRQ explicitly */
982         irq_stat = readl(port + PORT_IRQ_STAT);
983         writel(irq_stat, port + PORT_IRQ_STAT);
984
985         /* first, analyze and record host port events */
986         link = &ap->link;
987         ehi = &link->eh_info;
988         ata_ehi_clear_desc(ehi);
989
990         ata_ehi_push_desc(ehi, "irq_stat 0x%08x", irq_stat);
991
992         if (irq_stat & PORT_IRQ_SDB_NOTIFY) {
993                 ata_ehi_push_desc(ehi, "SDB notify");
994                 sata_async_notification(ap);
995         }
996
997         if (irq_stat & (PORT_IRQ_PHYRDY_CHG | PORT_IRQ_DEV_XCHG)) {
998                 ata_ehi_hotplugged(ehi);
999                 ata_ehi_push_desc(ehi, "%s",
1000                                   irq_stat & PORT_IRQ_PHYRDY_CHG ?
1001                                   "PHY RDY changed" : "device exchanged");
1002                 freeze = 1;
1003         }
1004
1005         if (irq_stat & PORT_IRQ_UNK_FIS) {
1006                 ehi->err_mask |= AC_ERR_HSM;
1007                 ehi->action |= ATA_EH_RESET;
1008                 ata_ehi_push_desc(ehi, "unknown FIS");
1009                 freeze = 1;
1010         }
1011
1012         /* deal with command error */
1013         if (irq_stat & PORT_IRQ_ERROR) {
1014                 struct sil24_cerr_info *ci = NULL;
1015                 unsigned int err_mask = 0, action = 0;
1016                 u32 context, cerr;
1017                 int pmp;
1018
1019                 abort = 1;
1020
1021                 /* DMA Context Switch Failure in Port Multiplier Mode
1022                  * errata.  If we have active commands to 3 or more
1023                  * devices, any error condition on active devices can
1024                  * corrupt DMA context switching.
1025                  */
1026                 if (ap->nr_active_links >= 3) {
1027                         ehi->err_mask |= AC_ERR_OTHER;
1028                         ehi->action |= ATA_EH_RESET;
1029                         ata_ehi_push_desc(ehi, "PMP DMA CS errata");
1030                         pp->do_port_rst = 1;
1031                         freeze = 1;
1032                 }
1033
1034                 /* find out the offending link and qc */
1035                 if (sata_pmp_attached(ap)) {
1036                         context = readl(port + PORT_CONTEXT);
1037                         pmp = (context >> 5) & 0xf;
1038
1039                         if (pmp < ap->nr_pmp_links) {
1040                                 link = &ap->pmp_link[pmp];
1041                                 ehi = &link->eh_info;
1042                                 qc = ata_qc_from_tag(ap, link->active_tag);
1043
1044                                 ata_ehi_clear_desc(ehi);
1045                                 ata_ehi_push_desc(ehi, "irq_stat 0x%08x",
1046                                                   irq_stat);
1047                         } else {
1048                                 err_mask |= AC_ERR_HSM;
1049                                 action |= ATA_EH_RESET;
1050                                 freeze = 1;
1051                         }
1052                 } else
1053                         qc = ata_qc_from_tag(ap, link->active_tag);
1054
1055                 /* analyze CMD_ERR */
1056                 cerr = readl(port + PORT_CMD_ERR);
1057                 if (cerr < ARRAY_SIZE(sil24_cerr_db))
1058                         ci = &sil24_cerr_db[cerr];
1059
1060                 if (ci && ci->desc) {
1061                         err_mask |= ci->err_mask;
1062                         action |= ci->action;
1063                         if (action & ATA_EH_RESET)
1064                                 freeze = 1;
1065                         ata_ehi_push_desc(ehi, "%s", ci->desc);
1066                 } else {
1067                         err_mask |= AC_ERR_OTHER;
1068                         action |= ATA_EH_RESET;
1069                         freeze = 1;
1070                         ata_ehi_push_desc(ehi, "unknown command error %d",
1071                                           cerr);
1072                 }
1073
1074                 /* record error info */
1075                 if (qc)
1076                         qc->err_mask |= err_mask;
1077                 else
1078                         ehi->err_mask |= err_mask;
1079
1080                 ehi->action |= action;
1081
1082                 /* if PMP, resume */
1083                 if (sata_pmp_attached(ap))
1084                         writel(PORT_CS_PMP_RESUME, port + PORT_CTRL_STAT);
1085         }
1086
1087         /* freeze or abort */
1088         if (freeze)
1089                 ata_port_freeze(ap);
1090         else if (abort) {
1091                 if (qc)
1092                         ata_link_abort(qc->dev->link);
1093                 else
1094                         ata_port_abort(ap);
1095         }
1096 }
1097
1098 static inline void sil24_host_intr(struct ata_port *ap)
1099 {
1100         void __iomem *port = sil24_port_base(ap);
1101         u32 slot_stat, qc_active;
1102         int rc;
1103
1104         /* If PCIX_IRQ_WOC, there's an inherent race window between
1105          * clearing IRQ pending status and reading PORT_SLOT_STAT
1106          * which may cause spurious interrupts afterwards.  This is
1107          * unavoidable and much better than losing interrupts which
1108          * happens if IRQ pending is cleared after reading
1109          * PORT_SLOT_STAT.
1110          */
1111         if (ap->flags & SIL24_FLAG_PCIX_IRQ_WOC)
1112                 writel(PORT_IRQ_COMPLETE, port + PORT_IRQ_STAT);
1113
1114         slot_stat = readl(port + PORT_SLOT_STAT);
1115
1116         if (unlikely(slot_stat & HOST_SSTAT_ATTN)) {
1117                 sil24_error_intr(ap);
1118                 return;
1119         }
1120
1121         qc_active = slot_stat & ~HOST_SSTAT_ATTN;
1122         rc = ata_qc_complete_multiple(ap, qc_active);
1123         if (rc > 0)
1124                 return;
1125         if (rc < 0) {
1126                 struct ata_eh_info *ehi = &ap->link.eh_info;
1127                 ehi->err_mask |= AC_ERR_HSM;
1128                 ehi->action |= ATA_EH_RESET;
1129                 ata_port_freeze(ap);
1130                 return;
1131         }
1132
1133         /* spurious interrupts are expected if PCIX_IRQ_WOC */
1134         if (!(ap->flags & SIL24_FLAG_PCIX_IRQ_WOC) && ata_ratelimit())
1135                 ata_port_printk(ap, KERN_INFO, "spurious interrupt "
1136                         "(slot_stat 0x%x active_tag %d sactive 0x%x)\n",
1137                         slot_stat, ap->link.active_tag, ap->link.sactive);
1138 }
1139
1140 static irqreturn_t sil24_interrupt(int irq, void *dev_instance)
1141 {
1142         struct ata_host *host = dev_instance;
1143         void __iomem *host_base = host->iomap[SIL24_HOST_BAR];
1144         unsigned handled = 0;
1145         u32 status;
1146         int i;
1147
1148         status = readl(host_base + HOST_IRQ_STAT);
1149
1150         if (status == 0xffffffff) {
1151                 printk(KERN_ERR DRV_NAME ": IRQ status == 0xffffffff, "
1152                        "PCI fault or device removal?\n");
1153                 goto out;
1154         }
1155
1156         if (!(status & IRQ_STAT_4PORTS))
1157                 goto out;
1158
1159         spin_lock(&host->lock);
1160
1161         for (i = 0; i < host->n_ports; i++)
1162                 if (status & (1 << i)) {
1163                         sil24_host_intr(host->ports[i]);
1164                         handled++;
1165                 }
1166
1167         spin_unlock(&host->lock);
1168  out:
1169         return IRQ_RETVAL(handled);
1170 }
1171
1172 static void sil24_error_handler(struct ata_port *ap)
1173 {
1174         struct sil24_port_priv *pp = ap->private_data;
1175
1176         if (sil24_init_port(ap))
1177                 ata_eh_freeze_port(ap);
1178
1179         sata_pmp_error_handler(ap);
1180
1181         pp->do_port_rst = 0;
1182 }
1183
1184 static void sil24_post_internal_cmd(struct ata_queued_cmd *qc)
1185 {
1186         struct ata_port *ap = qc->ap;
1187
1188         /* make DMA engine forget about the failed command */
1189         if ((qc->flags & ATA_QCFLAG_FAILED) && sil24_init_port(ap))
1190                 ata_eh_freeze_port(ap);
1191 }
1192
1193 static int sil24_port_start(struct ata_port *ap)
1194 {
1195         struct device *dev = ap->host->dev;
1196         struct sil24_port_priv *pp;
1197         union sil24_cmd_block *cb;
1198         size_t cb_size = sizeof(*cb) * SIL24_MAX_CMDS;
1199         dma_addr_t cb_dma;
1200
1201         pp = devm_kzalloc(dev, sizeof(*pp), GFP_KERNEL);
1202         if (!pp)
1203                 return -ENOMEM;
1204
1205         cb = dmam_alloc_coherent(dev, cb_size, &cb_dma, GFP_KERNEL);
1206         if (!cb)
1207                 return -ENOMEM;
1208         memset(cb, 0, cb_size);
1209
1210         pp->cmd_block = cb;
1211         pp->cmd_block_dma = cb_dma;
1212
1213         ap->private_data = pp;
1214
1215         ata_port_pbar_desc(ap, SIL24_HOST_BAR, -1, "host");
1216         ata_port_pbar_desc(ap, SIL24_PORT_BAR, sil24_port_offset(ap), "port");
1217
1218         return 0;
1219 }
1220
1221 static void sil24_init_controller(struct ata_host *host)
1222 {
1223         void __iomem *host_base = host->iomap[SIL24_HOST_BAR];
1224         u32 tmp;
1225         int i;
1226
1227         /* GPIO off */
1228         writel(0, host_base + HOST_FLASH_CMD);
1229
1230         /* clear global reset & mask interrupts during initialization */
1231         writel(0, host_base + HOST_CTRL);
1232
1233         /* init ports */
1234         for (i = 0; i < host->n_ports; i++) {
1235                 struct ata_port *ap = host->ports[i];
1236                 void __iomem *port = sil24_port_base(ap);
1237
1238
1239                 /* Initial PHY setting */
1240                 writel(0x20c, port + PORT_PHY_CFG);
1241
1242                 /* Clear port RST */
1243                 tmp = readl(port + PORT_CTRL_STAT);
1244                 if (tmp & PORT_CS_PORT_RST) {
1245                         writel(PORT_CS_PORT_RST, port + PORT_CTRL_CLR);
1246                         tmp = ata_wait_register(port + PORT_CTRL_STAT,
1247                                                 PORT_CS_PORT_RST,
1248                                                 PORT_CS_PORT_RST, 10, 100);
1249                         if (tmp & PORT_CS_PORT_RST)
1250                                 dev_printk(KERN_ERR, host->dev,
1251                                            "failed to clear port RST\n");
1252                 }
1253
1254                 /* configure port */
1255                 sil24_config_port(ap);
1256         }
1257
1258         /* Turn on interrupts */
1259         writel(IRQ_STAT_4PORTS, host_base + HOST_CTRL);
1260 }
1261
1262 static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
1263 {
1264         extern int __MARKER__sil24_cmd_block_is_sized_wrongly;
1265         static int printed_version;
1266         struct ata_port_info pi = sil24_port_info[ent->driver_data];
1267         const struct ata_port_info *ppi[] = { &pi, NULL };
1268         void __iomem * const *iomap;
1269         struct ata_host *host;
1270         int rc;
1271         u32 tmp;
1272
1273         /* cause link error if sil24_cmd_block is sized wrongly */
1274         if (sizeof(union sil24_cmd_block) != PAGE_SIZE)
1275                 __MARKER__sil24_cmd_block_is_sized_wrongly = 1;
1276
1277         if (!printed_version++)
1278                 dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
1279
1280         /* acquire resources */
1281         rc = pcim_enable_device(pdev);
1282         if (rc)
1283                 return rc;
1284
1285         rc = pcim_iomap_regions(pdev,
1286                                 (1 << SIL24_HOST_BAR) | (1 << SIL24_PORT_BAR),
1287                                 DRV_NAME);
1288         if (rc)
1289                 return rc;
1290         iomap = pcim_iomap_table(pdev);
1291
1292         /* apply workaround for completion IRQ loss on PCI-X errata */
1293         if (pi.flags & SIL24_FLAG_PCIX_IRQ_WOC) {
1294                 tmp = readl(iomap[SIL24_HOST_BAR] + HOST_CTRL);
1295                 if (tmp & (HOST_CTRL_TRDY | HOST_CTRL_STOP | HOST_CTRL_DEVSEL))
1296                         dev_printk(KERN_INFO, &pdev->dev,
1297                                    "Applying completion IRQ loss on PCI-X "
1298                                    "errata fix\n");
1299                 else
1300                         pi.flags &= ~SIL24_FLAG_PCIX_IRQ_WOC;
1301         }
1302
1303         /* allocate and fill host */
1304         host = ata_host_alloc_pinfo(&pdev->dev, ppi,
1305                                     SIL24_FLAG2NPORTS(ppi[0]->flags));
1306         if (!host)
1307                 return -ENOMEM;
1308         host->iomap = iomap;
1309
1310         /* configure and activate the device */
1311         if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) {
1312                 rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64));
1313                 if (rc) {
1314                         rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
1315                         if (rc) {
1316                                 dev_printk(KERN_ERR, &pdev->dev,
1317                                            "64-bit DMA enable failed\n");
1318                                 return rc;
1319                         }
1320                 }
1321         } else {
1322                 rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
1323                 if (rc) {
1324                         dev_printk(KERN_ERR, &pdev->dev,
1325                                    "32-bit DMA enable failed\n");
1326                         return rc;
1327                 }
1328                 rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
1329                 if (rc) {
1330                         dev_printk(KERN_ERR, &pdev->dev,
1331                                    "32-bit consistent DMA enable failed\n");
1332                         return rc;
1333                 }
1334         }
1335
1336         /* Set max read request size to 4096.  This slightly increases
1337          * write throughput for pci-e variants.
1338          */
1339         pcie_set_readrq(pdev, 4096);
1340
1341         sil24_init_controller(host);
1342
1343         if (sata_sil24_msi && !pci_enable_msi(pdev)) {
1344                 dev_printk(KERN_INFO, &pdev->dev, "Using MSI\n");
1345                 pci_intx(pdev, 0);
1346         }
1347
1348         pci_set_master(pdev);
1349         return ata_host_activate(host, pdev->irq, sil24_interrupt, IRQF_SHARED,
1350                                  &sil24_sht);
1351 }
1352
1353 #ifdef CONFIG_PM
1354 static int sil24_pci_device_resume(struct pci_dev *pdev)
1355 {
1356         struct ata_host *host = dev_get_drvdata(&pdev->dev);
1357         void __iomem *host_base = host->iomap[SIL24_HOST_BAR];
1358         int rc;
1359
1360         rc = ata_pci_device_do_resume(pdev);
1361         if (rc)
1362                 return rc;
1363
1364         if (pdev->dev.power.power_state.event == PM_EVENT_SUSPEND)
1365                 writel(HOST_CTRL_GLOBAL_RST, host_base + HOST_CTRL);
1366
1367         sil24_init_controller(host);
1368
1369         ata_host_resume(host);
1370
1371         return 0;
1372 }
1373
1374 static int sil24_port_resume(struct ata_port *ap)
1375 {
1376         sil24_config_pmp(ap, ap->nr_pmp_links);
1377         return 0;
1378 }
1379 #endif
1380
1381 static int __init sil24_init(void)
1382 {
1383         return pci_register_driver(&sil24_pci_driver);
1384 }
1385
1386 static void __exit sil24_exit(void)
1387 {
1388         pci_unregister_driver(&sil24_pci_driver);
1389 }
1390
1391 MODULE_AUTHOR("Tejun Heo");
1392 MODULE_DESCRIPTION("Silicon Image 3124/3132 SATA low-level driver");
1393 MODULE_LICENSE("GPL");
1394 MODULE_DEVICE_TABLE(pci, sil24_pci_tbl);
1395
1396 module_init(sil24_init);
1397 module_exit(sil24_exit);