Merge branch 'drm-radeon-evergreen-accel' into drm-core-next
[pandora-kernel.git] / drivers / ata / ahci.c
1 /*
2  *  ahci.c - AHCI SATA support
3  *
4  *  Maintained by:  Jeff Garzik <jgarzik@pobox.com>
5  *                  Please ALWAYS copy linux-ide@vger.kernel.org
6  *                  on emails.
7  *
8  *  Copyright 2004-2005 Red Hat, Inc.
9  *
10  *
11  *  This program is free software; you can redistribute it and/or modify
12  *  it under the terms of the GNU General Public License as published by
13  *  the Free Software Foundation; either version 2, or (at your option)
14  *  any later version.
15  *
16  *  This program is distributed in the hope that it will be useful,
17  *  but WITHOUT ANY WARRANTY; without even the implied warranty of
18  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
19  *  GNU General Public License for more details.
20  *
21  *  You should have received a copy of the GNU General Public License
22  *  along with this program; see the file COPYING.  If not, write to
23  *  the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
24  *
25  *
26  * libata documentation is available via 'make {ps|pdf}docs',
27  * as Documentation/DocBook/libata.*
28  *
29  * AHCI hardware documentation:
30  * http://www.intel.com/technology/serialata/pdf/rev1_0.pdf
31  * http://www.intel.com/technology/serialata/pdf/rev1_1.pdf
32  *
33  */
34
35 #include <linux/kernel.h>
36 #include <linux/module.h>
37 #include <linux/pci.h>
38 #include <linux/init.h>
39 #include <linux/blkdev.h>
40 #include <linux/delay.h>
41 #include <linux/interrupt.h>
42 #include <linux/dma-mapping.h>
43 #include <linux/device.h>
44 #include <linux/dmi.h>
45 #include <linux/gfp.h>
46 #include <scsi/scsi_host.h>
47 #include <scsi/scsi_cmnd.h>
48 #include <linux/libata.h>
49
50 #define DRV_NAME        "ahci"
51 #define DRV_VERSION     "3.0"
52
53 /* Enclosure Management Control */
54 #define EM_CTRL_MSG_TYPE              0x000f0000
55
56 /* Enclosure Management LED Message Type */
57 #define EM_MSG_LED_HBA_PORT           0x0000000f
58 #define EM_MSG_LED_PMP_SLOT           0x0000ff00
59 #define EM_MSG_LED_VALUE              0xffff0000
60 #define EM_MSG_LED_VALUE_ACTIVITY     0x00070000
61 #define EM_MSG_LED_VALUE_OFF          0xfff80000
62 #define EM_MSG_LED_VALUE_ON           0x00010000
63
64 static int ahci_skip_host_reset;
65 static int ahci_ignore_sss;
66
67 module_param_named(skip_host_reset, ahci_skip_host_reset, int, 0444);
68 MODULE_PARM_DESC(skip_host_reset, "skip global host reset (0=don't skip, 1=skip)");
69
70 module_param_named(ignore_sss, ahci_ignore_sss, int, 0444);
71 MODULE_PARM_DESC(ignore_sss, "Ignore staggered spinup flag (0=don't ignore, 1=ignore)");
72
73 static int ahci_enable_alpm(struct ata_port *ap,
74                 enum link_pm policy);
75 static void ahci_disable_alpm(struct ata_port *ap);
76 static ssize_t ahci_led_show(struct ata_port *ap, char *buf);
77 static ssize_t ahci_led_store(struct ata_port *ap, const char *buf,
78                               size_t size);
79 static ssize_t ahci_transmit_led_message(struct ata_port *ap, u32 state,
80                                         ssize_t size);
81
82 enum {
83         AHCI_PCI_BAR            = 5,
84         AHCI_MAX_PORTS          = 32,
85         AHCI_MAX_SG             = 168, /* hardware max is 64K */
86         AHCI_DMA_BOUNDARY       = 0xffffffff,
87         AHCI_MAX_CMDS           = 32,
88         AHCI_CMD_SZ             = 32,
89         AHCI_CMD_SLOT_SZ        = AHCI_MAX_CMDS * AHCI_CMD_SZ,
90         AHCI_RX_FIS_SZ          = 256,
91         AHCI_CMD_TBL_CDB        = 0x40,
92         AHCI_CMD_TBL_HDR_SZ     = 0x80,
93         AHCI_CMD_TBL_SZ         = AHCI_CMD_TBL_HDR_SZ + (AHCI_MAX_SG * 16),
94         AHCI_CMD_TBL_AR_SZ      = AHCI_CMD_TBL_SZ * AHCI_MAX_CMDS,
95         AHCI_PORT_PRIV_DMA_SZ   = AHCI_CMD_SLOT_SZ + AHCI_CMD_TBL_AR_SZ +
96                                   AHCI_RX_FIS_SZ,
97         AHCI_PORT_PRIV_FBS_DMA_SZ       = AHCI_CMD_SLOT_SZ +
98                                           AHCI_CMD_TBL_AR_SZ +
99                                           (AHCI_RX_FIS_SZ * 16),
100         AHCI_IRQ_ON_SG          = (1 << 31),
101         AHCI_CMD_ATAPI          = (1 << 5),
102         AHCI_CMD_WRITE          = (1 << 6),
103         AHCI_CMD_PREFETCH       = (1 << 7),
104         AHCI_CMD_RESET          = (1 << 8),
105         AHCI_CMD_CLR_BUSY       = (1 << 10),
106
107         RX_FIS_D2H_REG          = 0x40, /* offset of D2H Register FIS data */
108         RX_FIS_SDB              = 0x58, /* offset of SDB FIS data */
109         RX_FIS_UNK              = 0x60, /* offset of Unknown FIS data */
110
111         board_ahci              = 0,
112         board_ahci_vt8251       = 1,
113         board_ahci_ign_iferr    = 2,
114         board_ahci_sb600        = 3,
115         board_ahci_mv           = 4,
116         board_ahci_sb700        = 5, /* for SB700 and SB800 */
117         board_ahci_mcp65        = 6,
118         board_ahci_nopmp        = 7,
119         board_ahci_yesncq       = 8,
120         board_ahci_nosntf       = 9,
121
122         /* global controller registers */
123         HOST_CAP                = 0x00, /* host capabilities */
124         HOST_CTL                = 0x04, /* global host control */
125         HOST_IRQ_STAT           = 0x08, /* interrupt status */
126         HOST_PORTS_IMPL         = 0x0c, /* bitmap of implemented ports */
127         HOST_VERSION            = 0x10, /* AHCI spec. version compliancy */
128         HOST_EM_LOC             = 0x1c, /* Enclosure Management location */
129         HOST_EM_CTL             = 0x20, /* Enclosure Management Control */
130         HOST_CAP2               = 0x24, /* host capabilities, extended */
131
132         /* HOST_CTL bits */
133         HOST_RESET              = (1 << 0),  /* reset controller; self-clear */
134         HOST_IRQ_EN             = (1 << 1),  /* global IRQ enable */
135         HOST_AHCI_EN            = (1 << 31), /* AHCI enabled */
136
137         /* HOST_CAP bits */
138         HOST_CAP_SXS            = (1 << 5),  /* Supports External SATA */
139         HOST_CAP_EMS            = (1 << 6),  /* Enclosure Management support */
140         HOST_CAP_CCC            = (1 << 7),  /* Command Completion Coalescing */
141         HOST_CAP_PART           = (1 << 13), /* Partial state capable */
142         HOST_CAP_SSC            = (1 << 14), /* Slumber state capable */
143         HOST_CAP_PIO_MULTI      = (1 << 15), /* PIO multiple DRQ support */
144         HOST_CAP_FBS            = (1 << 16), /* FIS-based switching support */
145         HOST_CAP_PMP            = (1 << 17), /* Port Multiplier support */
146         HOST_CAP_ONLY           = (1 << 18), /* Supports AHCI mode only */
147         HOST_CAP_CLO            = (1 << 24), /* Command List Override support */
148         HOST_CAP_LED            = (1 << 25), /* Supports activity LED */
149         HOST_CAP_ALPM           = (1 << 26), /* Aggressive Link PM support */
150         HOST_CAP_SSS            = (1 << 27), /* Staggered Spin-up */
151         HOST_CAP_MPS            = (1 << 28), /* Mechanical presence switch */
152         HOST_CAP_SNTF           = (1 << 29), /* SNotification register */
153         HOST_CAP_NCQ            = (1 << 30), /* Native Command Queueing */
154         HOST_CAP_64             = (1 << 31), /* PCI DAC (64-bit DMA) support */
155
156         /* HOST_CAP2 bits */
157         HOST_CAP2_BOH           = (1 << 0),  /* BIOS/OS handoff supported */
158         HOST_CAP2_NVMHCI        = (1 << 1),  /* NVMHCI supported */
159         HOST_CAP2_APST          = (1 << 2),  /* Automatic partial to slumber */
160
161         /* registers for each SATA port */
162         PORT_LST_ADDR           = 0x00, /* command list DMA addr */
163         PORT_LST_ADDR_HI        = 0x04, /* command list DMA addr hi */
164         PORT_FIS_ADDR           = 0x08, /* FIS rx buf addr */
165         PORT_FIS_ADDR_HI        = 0x0c, /* FIS rx buf addr hi */
166         PORT_IRQ_STAT           = 0x10, /* interrupt status */
167         PORT_IRQ_MASK           = 0x14, /* interrupt enable/disable mask */
168         PORT_CMD                = 0x18, /* port command */
169         PORT_TFDATA             = 0x20, /* taskfile data */
170         PORT_SIG                = 0x24, /* device TF signature */
171         PORT_CMD_ISSUE          = 0x38, /* command issue */
172         PORT_SCR_STAT           = 0x28, /* SATA phy register: SStatus */
173         PORT_SCR_CTL            = 0x2c, /* SATA phy register: SControl */
174         PORT_SCR_ERR            = 0x30, /* SATA phy register: SError */
175         PORT_SCR_ACT            = 0x34, /* SATA phy register: SActive */
176         PORT_SCR_NTF            = 0x3c, /* SATA phy register: SNotification */
177         PORT_FBS                = 0x40, /* FIS-based Switching */
178
179         /* PORT_IRQ_{STAT,MASK} bits */
180         PORT_IRQ_COLD_PRES      = (1 << 31), /* cold presence detect */
181         PORT_IRQ_TF_ERR         = (1 << 30), /* task file error */
182         PORT_IRQ_HBUS_ERR       = (1 << 29), /* host bus fatal error */
183         PORT_IRQ_HBUS_DATA_ERR  = (1 << 28), /* host bus data error */
184         PORT_IRQ_IF_ERR         = (1 << 27), /* interface fatal error */
185         PORT_IRQ_IF_NONFATAL    = (1 << 26), /* interface non-fatal error */
186         PORT_IRQ_OVERFLOW       = (1 << 24), /* xfer exhausted available S/G */
187         PORT_IRQ_BAD_PMP        = (1 << 23), /* incorrect port multiplier */
188
189         PORT_IRQ_PHYRDY         = (1 << 22), /* PhyRdy changed */
190         PORT_IRQ_DEV_ILCK       = (1 << 7), /* device interlock */
191         PORT_IRQ_CONNECT        = (1 << 6), /* port connect change status */
192         PORT_IRQ_SG_DONE        = (1 << 5), /* descriptor processed */
193         PORT_IRQ_UNK_FIS        = (1 << 4), /* unknown FIS rx'd */
194         PORT_IRQ_SDB_FIS        = (1 << 3), /* Set Device Bits FIS rx'd */
195         PORT_IRQ_DMAS_FIS       = (1 << 2), /* DMA Setup FIS rx'd */
196         PORT_IRQ_PIOS_FIS       = (1 << 1), /* PIO Setup FIS rx'd */
197         PORT_IRQ_D2H_REG_FIS    = (1 << 0), /* D2H Register FIS rx'd */
198
199         PORT_IRQ_FREEZE         = PORT_IRQ_HBUS_ERR |
200                                   PORT_IRQ_IF_ERR |
201                                   PORT_IRQ_CONNECT |
202                                   PORT_IRQ_PHYRDY |
203                                   PORT_IRQ_UNK_FIS |
204                                   PORT_IRQ_BAD_PMP,
205         PORT_IRQ_ERROR          = PORT_IRQ_FREEZE |
206                                   PORT_IRQ_TF_ERR |
207                                   PORT_IRQ_HBUS_DATA_ERR,
208         DEF_PORT_IRQ            = PORT_IRQ_ERROR | PORT_IRQ_SG_DONE |
209                                   PORT_IRQ_SDB_FIS | PORT_IRQ_DMAS_FIS |
210                                   PORT_IRQ_PIOS_FIS | PORT_IRQ_D2H_REG_FIS,
211
212         /* PORT_CMD bits */
213         PORT_CMD_ASP            = (1 << 27), /* Aggressive Slumber/Partial */
214         PORT_CMD_ALPE           = (1 << 26), /* Aggressive Link PM enable */
215         PORT_CMD_ATAPI          = (1 << 24), /* Device is ATAPI */
216         PORT_CMD_FBSCP          = (1 << 22), /* FBS Capable Port */
217         PORT_CMD_PMP            = (1 << 17), /* PMP attached */
218         PORT_CMD_LIST_ON        = (1 << 15), /* cmd list DMA engine running */
219         PORT_CMD_FIS_ON         = (1 << 14), /* FIS DMA engine running */
220         PORT_CMD_FIS_RX         = (1 << 4), /* Enable FIS receive DMA engine */
221         PORT_CMD_CLO            = (1 << 3), /* Command list override */
222         PORT_CMD_POWER_ON       = (1 << 2), /* Power up device */
223         PORT_CMD_SPIN_UP        = (1 << 1), /* Spin up device */
224         PORT_CMD_START          = (1 << 0), /* Enable port DMA engine */
225
226         PORT_CMD_ICC_MASK       = (0xf << 28), /* i/f ICC state mask */
227         PORT_CMD_ICC_ACTIVE     = (0x1 << 28), /* Put i/f in active state */
228         PORT_CMD_ICC_PARTIAL    = (0x2 << 28), /* Put i/f in partial state */
229         PORT_CMD_ICC_SLUMBER    = (0x6 << 28), /* Put i/f in slumber state */
230
231         PORT_FBS_DWE_OFFSET     = 16, /* FBS device with error offset */
232         PORT_FBS_ADO_OFFSET     = 12, /* FBS active dev optimization offset */
233         PORT_FBS_DEV_OFFSET     = 8,  /* FBS device to issue offset */
234         PORT_FBS_DEV_MASK       = (0xf << PORT_FBS_DEV_OFFSET),  /* FBS.DEV */
235         PORT_FBS_SDE            = (1 << 2), /* FBS single device error */
236         PORT_FBS_DEC            = (1 << 1), /* FBS device error clear */
237         PORT_FBS_EN             = (1 << 0), /* Enable FBS */
238
239         /* hpriv->flags bits */
240         AHCI_HFLAG_NO_NCQ               = (1 << 0),
241         AHCI_HFLAG_IGN_IRQ_IF_ERR       = (1 << 1), /* ignore IRQ_IF_ERR */
242         AHCI_HFLAG_IGN_SERR_INTERNAL    = (1 << 2), /* ignore SERR_INTERNAL */
243         AHCI_HFLAG_32BIT_ONLY           = (1 << 3), /* force 32bit */
244         AHCI_HFLAG_MV_PATA              = (1 << 4), /* PATA port */
245         AHCI_HFLAG_NO_MSI               = (1 << 5), /* no PCI MSI */
246         AHCI_HFLAG_NO_PMP               = (1 << 6), /* no PMP */
247         AHCI_HFLAG_NO_HOTPLUG           = (1 << 7), /* ignore PxSERR.DIAG.N */
248         AHCI_HFLAG_SECT255              = (1 << 8), /* max 255 sectors */
249         AHCI_HFLAG_YES_NCQ              = (1 << 9), /* force NCQ cap on */
250         AHCI_HFLAG_NO_SUSPEND           = (1 << 10), /* don't suspend */
251         AHCI_HFLAG_SRST_TOUT_IS_OFFLINE = (1 << 11), /* treat SRST timeout as
252                                                         link offline */
253         AHCI_HFLAG_NO_SNTF              = (1 << 12), /* no sntf */
254
255         /* ap->flags bits */
256
257         AHCI_FLAG_COMMON                = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
258                                           ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA |
259                                           ATA_FLAG_ACPI_SATA | ATA_FLAG_AN |
260                                           ATA_FLAG_IPM,
261
262         ICH_MAP                         = 0x90, /* ICH MAP register */
263
264         /* em constants */
265         EM_MAX_SLOTS                    = 8,
266         EM_MAX_RETRY                    = 5,
267
268         /* em_ctl bits */
269         EM_CTL_RST                      = (1 << 9), /* Reset */
270         EM_CTL_TM                       = (1 << 8), /* Transmit Message */
271         EM_CTL_ALHD                     = (1 << 26), /* Activity LED */
272 };
273
274 struct ahci_cmd_hdr {
275         __le32                  opts;
276         __le32                  status;
277         __le32                  tbl_addr;
278         __le32                  tbl_addr_hi;
279         __le32                  reserved[4];
280 };
281
282 struct ahci_sg {
283         __le32                  addr;
284         __le32                  addr_hi;
285         __le32                  reserved;
286         __le32                  flags_size;
287 };
288
289 struct ahci_em_priv {
290         enum sw_activity blink_policy;
291         struct timer_list timer;
292         unsigned long saved_activity;
293         unsigned long activity;
294         unsigned long led_state;
295 };
296
297 struct ahci_host_priv {
298         unsigned int            flags;          /* AHCI_HFLAG_* */
299         u32                     cap;            /* cap to use */
300         u32                     cap2;           /* cap2 to use */
301         u32                     port_map;       /* port map to use */
302         u32                     saved_cap;      /* saved initial cap */
303         u32                     saved_cap2;     /* saved initial cap2 */
304         u32                     saved_port_map; /* saved initial port_map */
305         u32                     em_loc; /* enclosure management location */
306 };
307
308 struct ahci_port_priv {
309         struct ata_link         *active_link;
310         struct ahci_cmd_hdr     *cmd_slot;
311         dma_addr_t              cmd_slot_dma;
312         void                    *cmd_tbl;
313         dma_addr_t              cmd_tbl_dma;
314         void                    *rx_fis;
315         dma_addr_t              rx_fis_dma;
316         /* for NCQ spurious interrupt analysis */
317         unsigned int            ncq_saw_d2h:1;
318         unsigned int            ncq_saw_dmas:1;
319         unsigned int            ncq_saw_sdb:1;
320         u32                     intr_mask;      /* interrupts to enable */
321         bool                    fbs_supported;  /* set iff FBS is supported */
322         bool                    fbs_enabled;    /* set iff FBS is enabled */
323         int                     fbs_last_dev;   /* save FBS.DEV of last FIS */
324         /* enclosure management info per PM slot */
325         struct ahci_em_priv     em_priv[EM_MAX_SLOTS];
326 };
327
328 static int ahci_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val);
329 static int ahci_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val);
330 static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
331 static unsigned int ahci_qc_issue(struct ata_queued_cmd *qc);
332 static bool ahci_qc_fill_rtf(struct ata_queued_cmd *qc);
333 static int ahci_port_start(struct ata_port *ap);
334 static void ahci_port_stop(struct ata_port *ap);
335 static int ahci_pmp_qc_defer(struct ata_queued_cmd *qc);
336 static void ahci_qc_prep(struct ata_queued_cmd *qc);
337 static void ahci_freeze(struct ata_port *ap);
338 static void ahci_thaw(struct ata_port *ap);
339 static void ahci_enable_fbs(struct ata_port *ap);
340 static void ahci_disable_fbs(struct ata_port *ap);
341 static void ahci_pmp_attach(struct ata_port *ap);
342 static void ahci_pmp_detach(struct ata_port *ap);
343 static int ahci_softreset(struct ata_link *link, unsigned int *class,
344                           unsigned long deadline);
345 static int ahci_sb600_softreset(struct ata_link *link, unsigned int *class,
346                           unsigned long deadline);
347 static int ahci_hardreset(struct ata_link *link, unsigned int *class,
348                           unsigned long deadline);
349 static int ahci_vt8251_hardreset(struct ata_link *link, unsigned int *class,
350                                  unsigned long deadline);
351 static int ahci_p5wdh_hardreset(struct ata_link *link, unsigned int *class,
352                                 unsigned long deadline);
353 static void ahci_postreset(struct ata_link *link, unsigned int *class);
354 static void ahci_error_handler(struct ata_port *ap);
355 static void ahci_post_internal_cmd(struct ata_queued_cmd *qc);
356 static int ahci_port_resume(struct ata_port *ap);
357 static void ahci_dev_config(struct ata_device *dev);
358 static void ahci_fill_cmd_slot(struct ahci_port_priv *pp, unsigned int tag,
359                                u32 opts);
360 #ifdef CONFIG_PM
361 static int ahci_port_suspend(struct ata_port *ap, pm_message_t mesg);
362 static int ahci_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg);
363 static int ahci_pci_device_resume(struct pci_dev *pdev);
364 #endif
365 static ssize_t ahci_activity_show(struct ata_device *dev, char *buf);
366 static ssize_t ahci_activity_store(struct ata_device *dev,
367                                    enum sw_activity val);
368 static void ahci_init_sw_activity(struct ata_link *link);
369
370 static ssize_t ahci_show_host_caps(struct device *dev,
371                                    struct device_attribute *attr, char *buf);
372 static ssize_t ahci_show_host_cap2(struct device *dev,
373                                    struct device_attribute *attr, char *buf);
374 static ssize_t ahci_show_host_version(struct device *dev,
375                                       struct device_attribute *attr, char *buf);
376 static ssize_t ahci_show_port_cmd(struct device *dev,
377                                   struct device_attribute *attr, char *buf);
378
379 static DEVICE_ATTR(ahci_host_caps, S_IRUGO, ahci_show_host_caps, NULL);
380 static DEVICE_ATTR(ahci_host_cap2, S_IRUGO, ahci_show_host_cap2, NULL);
381 static DEVICE_ATTR(ahci_host_version, S_IRUGO, ahci_show_host_version, NULL);
382 static DEVICE_ATTR(ahci_port_cmd, S_IRUGO, ahci_show_port_cmd, NULL);
383
384 static struct device_attribute *ahci_shost_attrs[] = {
385         &dev_attr_link_power_management_policy,
386         &dev_attr_em_message_type,
387         &dev_attr_em_message,
388         &dev_attr_ahci_host_caps,
389         &dev_attr_ahci_host_cap2,
390         &dev_attr_ahci_host_version,
391         &dev_attr_ahci_port_cmd,
392         NULL
393 };
394
395 static struct device_attribute *ahci_sdev_attrs[] = {
396         &dev_attr_sw_activity,
397         &dev_attr_unload_heads,
398         NULL
399 };
400
401 static struct scsi_host_template ahci_sht = {
402         ATA_NCQ_SHT(DRV_NAME),
403         .can_queue              = AHCI_MAX_CMDS - 1,
404         .sg_tablesize           = AHCI_MAX_SG,
405         .dma_boundary           = AHCI_DMA_BOUNDARY,
406         .shost_attrs            = ahci_shost_attrs,
407         .sdev_attrs             = ahci_sdev_attrs,
408 };
409
410 static struct ata_port_operations ahci_ops = {
411         .inherits               = &sata_pmp_port_ops,
412
413         .qc_defer               = ahci_pmp_qc_defer,
414         .qc_prep                = ahci_qc_prep,
415         .qc_issue               = ahci_qc_issue,
416         .qc_fill_rtf            = ahci_qc_fill_rtf,
417
418         .freeze                 = ahci_freeze,
419         .thaw                   = ahci_thaw,
420         .softreset              = ahci_softreset,
421         .hardreset              = ahci_hardreset,
422         .postreset              = ahci_postreset,
423         .pmp_softreset          = ahci_softreset,
424         .error_handler          = ahci_error_handler,
425         .post_internal_cmd      = ahci_post_internal_cmd,
426         .dev_config             = ahci_dev_config,
427
428         .scr_read               = ahci_scr_read,
429         .scr_write              = ahci_scr_write,
430         .pmp_attach             = ahci_pmp_attach,
431         .pmp_detach             = ahci_pmp_detach,
432
433         .enable_pm              = ahci_enable_alpm,
434         .disable_pm             = ahci_disable_alpm,
435         .em_show                = ahci_led_show,
436         .em_store               = ahci_led_store,
437         .sw_activity_show       = ahci_activity_show,
438         .sw_activity_store      = ahci_activity_store,
439 #ifdef CONFIG_PM
440         .port_suspend           = ahci_port_suspend,
441         .port_resume            = ahci_port_resume,
442 #endif
443         .port_start             = ahci_port_start,
444         .port_stop              = ahci_port_stop,
445 };
446
447 static struct ata_port_operations ahci_vt8251_ops = {
448         .inherits               = &ahci_ops,
449         .hardreset              = ahci_vt8251_hardreset,
450 };
451
452 static struct ata_port_operations ahci_p5wdh_ops = {
453         .inherits               = &ahci_ops,
454         .hardreset              = ahci_p5wdh_hardreset,
455 };
456
457 static struct ata_port_operations ahci_sb600_ops = {
458         .inherits               = &ahci_ops,
459         .softreset              = ahci_sb600_softreset,
460         .pmp_softreset          = ahci_sb600_softreset,
461 };
462
463 #define AHCI_HFLAGS(flags)      .private_data   = (void *)(flags)
464
465 static const struct ata_port_info ahci_port_info[] = {
466         [board_ahci] =
467         {
468                 .flags          = AHCI_FLAG_COMMON,
469                 .pio_mask       = ATA_PIO4,
470                 .udma_mask      = ATA_UDMA6,
471                 .port_ops       = &ahci_ops,
472         },
473         [board_ahci_vt8251] =
474         {
475                 AHCI_HFLAGS     (AHCI_HFLAG_NO_NCQ | AHCI_HFLAG_NO_PMP),
476                 .flags          = AHCI_FLAG_COMMON,
477                 .pio_mask       = ATA_PIO4,
478                 .udma_mask      = ATA_UDMA6,
479                 .port_ops       = &ahci_vt8251_ops,
480         },
481         [board_ahci_ign_iferr] =
482         {
483                 AHCI_HFLAGS     (AHCI_HFLAG_IGN_IRQ_IF_ERR),
484                 .flags          = AHCI_FLAG_COMMON,
485                 .pio_mask       = ATA_PIO4,
486                 .udma_mask      = ATA_UDMA6,
487                 .port_ops       = &ahci_ops,
488         },
489         [board_ahci_sb600] =
490         {
491                 AHCI_HFLAGS     (AHCI_HFLAG_IGN_SERR_INTERNAL |
492                                  AHCI_HFLAG_NO_MSI | AHCI_HFLAG_SECT255 |
493                                  AHCI_HFLAG_32BIT_ONLY),
494                 .flags          = AHCI_FLAG_COMMON,
495                 .pio_mask       = ATA_PIO4,
496                 .udma_mask      = ATA_UDMA6,
497                 .port_ops       = &ahci_sb600_ops,
498         },
499         [board_ahci_mv] =
500         {
501                 AHCI_HFLAGS     (AHCI_HFLAG_NO_NCQ | AHCI_HFLAG_NO_MSI |
502                                  AHCI_HFLAG_MV_PATA | AHCI_HFLAG_NO_PMP),
503                 .flags          = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
504                                   ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA,
505                 .pio_mask       = ATA_PIO4,
506                 .udma_mask      = ATA_UDMA6,
507                 .port_ops       = &ahci_ops,
508         },
509         [board_ahci_sb700] =    /* for SB700 and SB800 */
510         {
511                 AHCI_HFLAGS     (AHCI_HFLAG_IGN_SERR_INTERNAL),
512                 .flags          = AHCI_FLAG_COMMON,
513                 .pio_mask       = ATA_PIO4,
514                 .udma_mask      = ATA_UDMA6,
515                 .port_ops       = &ahci_sb600_ops,
516         },
517         [board_ahci_mcp65] =
518         {
519                 AHCI_HFLAGS     (AHCI_HFLAG_YES_NCQ),
520                 .flags          = AHCI_FLAG_COMMON,
521                 .pio_mask       = ATA_PIO4,
522                 .udma_mask      = ATA_UDMA6,
523                 .port_ops       = &ahci_ops,
524         },
525         [board_ahci_nopmp] =
526         {
527                 AHCI_HFLAGS     (AHCI_HFLAG_NO_PMP),
528                 .flags          = AHCI_FLAG_COMMON,
529                 .pio_mask       = ATA_PIO4,
530                 .udma_mask      = ATA_UDMA6,
531                 .port_ops       = &ahci_ops,
532         },
533         [board_ahci_yesncq] =
534         {
535                 AHCI_HFLAGS     (AHCI_HFLAG_YES_NCQ),
536                 .flags          = AHCI_FLAG_COMMON,
537                 .pio_mask       = ATA_PIO4,
538                 .udma_mask      = ATA_UDMA6,
539                 .port_ops       = &ahci_ops,
540         },
541         [board_ahci_nosntf] =
542         {
543                 AHCI_HFLAGS     (AHCI_HFLAG_NO_SNTF),
544                 .flags          = AHCI_FLAG_COMMON,
545                 .pio_mask       = ATA_PIO4,
546                 .udma_mask      = ATA_UDMA6,
547                 .port_ops       = &ahci_ops,
548         },
549 };
550
551 static const struct pci_device_id ahci_pci_tbl[] = {
552         /* Intel */
553         { PCI_VDEVICE(INTEL, 0x2652), board_ahci }, /* ICH6 */
554         { PCI_VDEVICE(INTEL, 0x2653), board_ahci }, /* ICH6M */
555         { PCI_VDEVICE(INTEL, 0x27c1), board_ahci }, /* ICH7 */
556         { PCI_VDEVICE(INTEL, 0x27c5), board_ahci }, /* ICH7M */
557         { PCI_VDEVICE(INTEL, 0x27c3), board_ahci }, /* ICH7R */
558         { PCI_VDEVICE(AL, 0x5288), board_ahci_ign_iferr }, /* ULi M5288 */
559         { PCI_VDEVICE(INTEL, 0x2681), board_ahci }, /* ESB2 */
560         { PCI_VDEVICE(INTEL, 0x2682), board_ahci }, /* ESB2 */
561         { PCI_VDEVICE(INTEL, 0x2683), board_ahci }, /* ESB2 */
562         { PCI_VDEVICE(INTEL, 0x27c6), board_ahci }, /* ICH7-M DH */
563         { PCI_VDEVICE(INTEL, 0x2821), board_ahci }, /* ICH8 */
564         { PCI_VDEVICE(INTEL, 0x2822), board_ahci_nosntf }, /* ICH8 */
565         { PCI_VDEVICE(INTEL, 0x2824), board_ahci }, /* ICH8 */
566         { PCI_VDEVICE(INTEL, 0x2829), board_ahci }, /* ICH8M */
567         { PCI_VDEVICE(INTEL, 0x282a), board_ahci }, /* ICH8M */
568         { PCI_VDEVICE(INTEL, 0x2922), board_ahci }, /* ICH9 */
569         { PCI_VDEVICE(INTEL, 0x2923), board_ahci }, /* ICH9 */
570         { PCI_VDEVICE(INTEL, 0x2924), board_ahci }, /* ICH9 */
571         { PCI_VDEVICE(INTEL, 0x2925), board_ahci }, /* ICH9 */
572         { PCI_VDEVICE(INTEL, 0x2927), board_ahci }, /* ICH9 */
573         { PCI_VDEVICE(INTEL, 0x2929), board_ahci }, /* ICH9M */
574         { PCI_VDEVICE(INTEL, 0x292a), board_ahci }, /* ICH9M */
575         { PCI_VDEVICE(INTEL, 0x292b), board_ahci }, /* ICH9M */
576         { PCI_VDEVICE(INTEL, 0x292c), board_ahci }, /* ICH9M */
577         { PCI_VDEVICE(INTEL, 0x292f), board_ahci }, /* ICH9M */
578         { PCI_VDEVICE(INTEL, 0x294d), board_ahci }, /* ICH9 */
579         { PCI_VDEVICE(INTEL, 0x294e), board_ahci }, /* ICH9M */
580         { PCI_VDEVICE(INTEL, 0x502a), board_ahci }, /* Tolapai */
581         { PCI_VDEVICE(INTEL, 0x502b), board_ahci }, /* Tolapai */
582         { PCI_VDEVICE(INTEL, 0x3a05), board_ahci }, /* ICH10 */
583         { PCI_VDEVICE(INTEL, 0x3a22), board_ahci }, /* ICH10 */
584         { PCI_VDEVICE(INTEL, 0x3a25), board_ahci }, /* ICH10 */
585         { PCI_VDEVICE(INTEL, 0x3b22), board_ahci }, /* PCH AHCI */
586         { PCI_VDEVICE(INTEL, 0x3b23), board_ahci }, /* PCH AHCI */
587         { PCI_VDEVICE(INTEL, 0x3b24), board_ahci }, /* PCH RAID */
588         { PCI_VDEVICE(INTEL, 0x3b25), board_ahci }, /* PCH RAID */
589         { PCI_VDEVICE(INTEL, 0x3b29), board_ahci }, /* PCH AHCI */
590         { PCI_VDEVICE(INTEL, 0x3b2b), board_ahci }, /* PCH RAID */
591         { PCI_VDEVICE(INTEL, 0x3b2c), board_ahci }, /* PCH RAID */
592         { PCI_VDEVICE(INTEL, 0x3b2f), board_ahci }, /* PCH AHCI */
593         { PCI_VDEVICE(INTEL, 0x1c02), board_ahci }, /* CPT AHCI */
594         { PCI_VDEVICE(INTEL, 0x1c03), board_ahci }, /* CPT AHCI */
595         { PCI_VDEVICE(INTEL, 0x1c04), board_ahci }, /* CPT RAID */
596         { PCI_VDEVICE(INTEL, 0x1c05), board_ahci }, /* CPT RAID */
597         { PCI_VDEVICE(INTEL, 0x1c06), board_ahci }, /* CPT RAID */
598         { PCI_VDEVICE(INTEL, 0x1c07), board_ahci }, /* CPT RAID */
599
600         /* JMicron 360/1/3/5/6, match class to avoid IDE function */
601         { PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
602           PCI_CLASS_STORAGE_SATA_AHCI, 0xffffff, board_ahci_ign_iferr },
603
604         /* ATI */
605         { PCI_VDEVICE(ATI, 0x4380), board_ahci_sb600 }, /* ATI SB600 */
606         { PCI_VDEVICE(ATI, 0x4390), board_ahci_sb700 }, /* ATI SB700/800 */
607         { PCI_VDEVICE(ATI, 0x4391), board_ahci_sb700 }, /* ATI SB700/800 */
608         { PCI_VDEVICE(ATI, 0x4392), board_ahci_sb700 }, /* ATI SB700/800 */
609         { PCI_VDEVICE(ATI, 0x4393), board_ahci_sb700 }, /* ATI SB700/800 */
610         { PCI_VDEVICE(ATI, 0x4394), board_ahci_sb700 }, /* ATI SB700/800 */
611         { PCI_VDEVICE(ATI, 0x4395), board_ahci_sb700 }, /* ATI SB700/800 */
612
613         /* AMD */
614         { PCI_VDEVICE(AMD, 0x7800), board_ahci }, /* AMD Hudson-2 */
615         /* AMD is using RAID class only for ahci controllers */
616         { PCI_VENDOR_ID_AMD, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
617           PCI_CLASS_STORAGE_RAID << 8, 0xffffff, board_ahci },
618
619         /* VIA */
620         { PCI_VDEVICE(VIA, 0x3349), board_ahci_vt8251 }, /* VIA VT8251 */
621         { PCI_VDEVICE(VIA, 0x6287), board_ahci_vt8251 }, /* VIA VT8251 */
622
623         /* NVIDIA */
624         { PCI_VDEVICE(NVIDIA, 0x044c), board_ahci_mcp65 },      /* MCP65 */
625         { PCI_VDEVICE(NVIDIA, 0x044d), board_ahci_mcp65 },      /* MCP65 */
626         { PCI_VDEVICE(NVIDIA, 0x044e), board_ahci_mcp65 },      /* MCP65 */
627         { PCI_VDEVICE(NVIDIA, 0x044f), board_ahci_mcp65 },      /* MCP65 */
628         { PCI_VDEVICE(NVIDIA, 0x045c), board_ahci_mcp65 },      /* MCP65 */
629         { PCI_VDEVICE(NVIDIA, 0x045d), board_ahci_mcp65 },      /* MCP65 */
630         { PCI_VDEVICE(NVIDIA, 0x045e), board_ahci_mcp65 },      /* MCP65 */
631         { PCI_VDEVICE(NVIDIA, 0x045f), board_ahci_mcp65 },      /* MCP65 */
632         { PCI_VDEVICE(NVIDIA, 0x0550), board_ahci_yesncq },     /* MCP67 */
633         { PCI_VDEVICE(NVIDIA, 0x0551), board_ahci_yesncq },     /* MCP67 */
634         { PCI_VDEVICE(NVIDIA, 0x0552), board_ahci_yesncq },     /* MCP67 */
635         { PCI_VDEVICE(NVIDIA, 0x0553), board_ahci_yesncq },     /* MCP67 */
636         { PCI_VDEVICE(NVIDIA, 0x0554), board_ahci_yesncq },     /* MCP67 */
637         { PCI_VDEVICE(NVIDIA, 0x0555), board_ahci_yesncq },     /* MCP67 */
638         { PCI_VDEVICE(NVIDIA, 0x0556), board_ahci_yesncq },     /* MCP67 */
639         { PCI_VDEVICE(NVIDIA, 0x0557), board_ahci_yesncq },     /* MCP67 */
640         { PCI_VDEVICE(NVIDIA, 0x0558), board_ahci_yesncq },     /* MCP67 */
641         { PCI_VDEVICE(NVIDIA, 0x0559), board_ahci_yesncq },     /* MCP67 */
642         { PCI_VDEVICE(NVIDIA, 0x055a), board_ahci_yesncq },     /* MCP67 */
643         { PCI_VDEVICE(NVIDIA, 0x055b), board_ahci_yesncq },     /* MCP67 */
644         { PCI_VDEVICE(NVIDIA, 0x0580), board_ahci_yesncq },     /* Linux ID */
645         { PCI_VDEVICE(NVIDIA, 0x0581), board_ahci_yesncq },     /* Linux ID */
646         { PCI_VDEVICE(NVIDIA, 0x0582), board_ahci_yesncq },     /* Linux ID */
647         { PCI_VDEVICE(NVIDIA, 0x0583), board_ahci_yesncq },     /* Linux ID */
648         { PCI_VDEVICE(NVIDIA, 0x0584), board_ahci_yesncq },     /* Linux ID */
649         { PCI_VDEVICE(NVIDIA, 0x0585), board_ahci_yesncq },     /* Linux ID */
650         { PCI_VDEVICE(NVIDIA, 0x0586), board_ahci_yesncq },     /* Linux ID */
651         { PCI_VDEVICE(NVIDIA, 0x0587), board_ahci_yesncq },     /* Linux ID */
652         { PCI_VDEVICE(NVIDIA, 0x0588), board_ahci_yesncq },     /* Linux ID */
653         { PCI_VDEVICE(NVIDIA, 0x0589), board_ahci_yesncq },     /* Linux ID */
654         { PCI_VDEVICE(NVIDIA, 0x058a), board_ahci_yesncq },     /* Linux ID */
655         { PCI_VDEVICE(NVIDIA, 0x058b), board_ahci_yesncq },     /* Linux ID */
656         { PCI_VDEVICE(NVIDIA, 0x058c), board_ahci_yesncq },     /* Linux ID */
657         { PCI_VDEVICE(NVIDIA, 0x058d), board_ahci_yesncq },     /* Linux ID */
658         { PCI_VDEVICE(NVIDIA, 0x058e), board_ahci_yesncq },     /* Linux ID */
659         { PCI_VDEVICE(NVIDIA, 0x058f), board_ahci_yesncq },     /* Linux ID */
660         { PCI_VDEVICE(NVIDIA, 0x07f0), board_ahci_yesncq },     /* MCP73 */
661         { PCI_VDEVICE(NVIDIA, 0x07f1), board_ahci_yesncq },     /* MCP73 */
662         { PCI_VDEVICE(NVIDIA, 0x07f2), board_ahci_yesncq },     /* MCP73 */
663         { PCI_VDEVICE(NVIDIA, 0x07f3), board_ahci_yesncq },     /* MCP73 */
664         { PCI_VDEVICE(NVIDIA, 0x07f4), board_ahci_yesncq },     /* MCP73 */
665         { PCI_VDEVICE(NVIDIA, 0x07f5), board_ahci_yesncq },     /* MCP73 */
666         { PCI_VDEVICE(NVIDIA, 0x07f6), board_ahci_yesncq },     /* MCP73 */
667         { PCI_VDEVICE(NVIDIA, 0x07f7), board_ahci_yesncq },     /* MCP73 */
668         { PCI_VDEVICE(NVIDIA, 0x07f8), board_ahci_yesncq },     /* MCP73 */
669         { PCI_VDEVICE(NVIDIA, 0x07f9), board_ahci_yesncq },     /* MCP73 */
670         { PCI_VDEVICE(NVIDIA, 0x07fa), board_ahci_yesncq },     /* MCP73 */
671         { PCI_VDEVICE(NVIDIA, 0x07fb), board_ahci_yesncq },     /* MCP73 */
672         { PCI_VDEVICE(NVIDIA, 0x0ad0), board_ahci },            /* MCP77 */
673         { PCI_VDEVICE(NVIDIA, 0x0ad1), board_ahci },            /* MCP77 */
674         { PCI_VDEVICE(NVIDIA, 0x0ad2), board_ahci },            /* MCP77 */
675         { PCI_VDEVICE(NVIDIA, 0x0ad3), board_ahci },            /* MCP77 */
676         { PCI_VDEVICE(NVIDIA, 0x0ad4), board_ahci },            /* MCP77 */
677         { PCI_VDEVICE(NVIDIA, 0x0ad5), board_ahci },            /* MCP77 */
678         { PCI_VDEVICE(NVIDIA, 0x0ad6), board_ahci },            /* MCP77 */
679         { PCI_VDEVICE(NVIDIA, 0x0ad7), board_ahci },            /* MCP77 */
680         { PCI_VDEVICE(NVIDIA, 0x0ad8), board_ahci },            /* MCP77 */
681         { PCI_VDEVICE(NVIDIA, 0x0ad9), board_ahci },            /* MCP77 */
682         { PCI_VDEVICE(NVIDIA, 0x0ada), board_ahci },            /* MCP77 */
683         { PCI_VDEVICE(NVIDIA, 0x0adb), board_ahci },            /* MCP77 */
684         { PCI_VDEVICE(NVIDIA, 0x0ab4), board_ahci },            /* MCP79 */
685         { PCI_VDEVICE(NVIDIA, 0x0ab5), board_ahci },            /* MCP79 */
686         { PCI_VDEVICE(NVIDIA, 0x0ab6), board_ahci },            /* MCP79 */
687         { PCI_VDEVICE(NVIDIA, 0x0ab7), board_ahci },            /* MCP79 */
688         { PCI_VDEVICE(NVIDIA, 0x0ab8), board_ahci },            /* MCP79 */
689         { PCI_VDEVICE(NVIDIA, 0x0ab9), board_ahci },            /* MCP79 */
690         { PCI_VDEVICE(NVIDIA, 0x0aba), board_ahci },            /* MCP79 */
691         { PCI_VDEVICE(NVIDIA, 0x0abb), board_ahci },            /* MCP79 */
692         { PCI_VDEVICE(NVIDIA, 0x0abc), board_ahci },            /* MCP79 */
693         { PCI_VDEVICE(NVIDIA, 0x0abd), board_ahci },            /* MCP79 */
694         { PCI_VDEVICE(NVIDIA, 0x0abe), board_ahci },            /* MCP79 */
695         { PCI_VDEVICE(NVIDIA, 0x0abf), board_ahci },            /* MCP79 */
696         { PCI_VDEVICE(NVIDIA, 0x0d84), board_ahci },            /* MCP89 */
697         { PCI_VDEVICE(NVIDIA, 0x0d85), board_ahci },            /* MCP89 */
698         { PCI_VDEVICE(NVIDIA, 0x0d86), board_ahci },            /* MCP89 */
699         { PCI_VDEVICE(NVIDIA, 0x0d87), board_ahci },            /* MCP89 */
700         { PCI_VDEVICE(NVIDIA, 0x0d88), board_ahci },            /* MCP89 */
701         { PCI_VDEVICE(NVIDIA, 0x0d89), board_ahci },            /* MCP89 */
702         { PCI_VDEVICE(NVIDIA, 0x0d8a), board_ahci },            /* MCP89 */
703         { PCI_VDEVICE(NVIDIA, 0x0d8b), board_ahci },            /* MCP89 */
704         { PCI_VDEVICE(NVIDIA, 0x0d8c), board_ahci },            /* MCP89 */
705         { PCI_VDEVICE(NVIDIA, 0x0d8d), board_ahci },            /* MCP89 */
706         { PCI_VDEVICE(NVIDIA, 0x0d8e), board_ahci },            /* MCP89 */
707         { PCI_VDEVICE(NVIDIA, 0x0d8f), board_ahci },            /* MCP89 */
708
709         /* SiS */
710         { PCI_VDEVICE(SI, 0x1184), board_ahci },                /* SiS 966 */
711         { PCI_VDEVICE(SI, 0x1185), board_ahci },                /* SiS 968 */
712         { PCI_VDEVICE(SI, 0x0186), board_ahci },                /* SiS 968 */
713
714         /* Marvell */
715         { PCI_VDEVICE(MARVELL, 0x6145), board_ahci_mv },        /* 6145 */
716         { PCI_VDEVICE(MARVELL, 0x6121), board_ahci_mv },        /* 6121 */
717
718         /* Promise */
719         { PCI_VDEVICE(PROMISE, 0x3f20), board_ahci },   /* PDC42819 */
720
721         /* Generic, PCI class code for AHCI */
722         { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
723           PCI_CLASS_STORAGE_SATA_AHCI, 0xffffff, board_ahci },
724
725         { }     /* terminate list */
726 };
727
728
729 static struct pci_driver ahci_pci_driver = {
730         .name                   = DRV_NAME,
731         .id_table               = ahci_pci_tbl,
732         .probe                  = ahci_init_one,
733         .remove                 = ata_pci_remove_one,
734 #ifdef CONFIG_PM
735         .suspend                = ahci_pci_device_suspend,
736         .resume                 = ahci_pci_device_resume,
737 #endif
738 };
739
740 static int ahci_em_messages = 1;
741 module_param(ahci_em_messages, int, 0444);
742 /* add other LED protocol types when they become supported */
743 MODULE_PARM_DESC(ahci_em_messages,
744         "Set AHCI Enclosure Management Message type (0 = disabled, 1 = LED");
745
746 #if defined(CONFIG_PATA_MARVELL) || defined(CONFIG_PATA_MARVELL_MODULE)
747 static int marvell_enable;
748 #else
749 static int marvell_enable = 1;
750 #endif
751 module_param(marvell_enable, int, 0644);
752 MODULE_PARM_DESC(marvell_enable, "Marvell SATA via AHCI (1 = enabled)");
753
754
755 static inline int ahci_nr_ports(u32 cap)
756 {
757         return (cap & 0x1f) + 1;
758 }
759
760 static inline void __iomem *__ahci_port_base(struct ata_host *host,
761                                              unsigned int port_no)
762 {
763         void __iomem *mmio = host->iomap[AHCI_PCI_BAR];
764
765         return mmio + 0x100 + (port_no * 0x80);
766 }
767
768 static inline void __iomem *ahci_port_base(struct ata_port *ap)
769 {
770         return __ahci_port_base(ap->host, ap->port_no);
771 }
772
773 static void ahci_enable_ahci(void __iomem *mmio)
774 {
775         int i;
776         u32 tmp;
777
778         /* turn on AHCI_EN */
779         tmp = readl(mmio + HOST_CTL);
780         if (tmp & HOST_AHCI_EN)
781                 return;
782
783         /* Some controllers need AHCI_EN to be written multiple times.
784          * Try a few times before giving up.
785          */
786         for (i = 0; i < 5; i++) {
787                 tmp |= HOST_AHCI_EN;
788                 writel(tmp, mmio + HOST_CTL);
789                 tmp = readl(mmio + HOST_CTL);   /* flush && sanity check */
790                 if (tmp & HOST_AHCI_EN)
791                         return;
792                 msleep(10);
793         }
794
795         WARN_ON(1);
796 }
797
798 static ssize_t ahci_show_host_caps(struct device *dev,
799                                    struct device_attribute *attr, char *buf)
800 {
801         struct Scsi_Host *shost = class_to_shost(dev);
802         struct ata_port *ap = ata_shost_to_port(shost);
803         struct ahci_host_priv *hpriv = ap->host->private_data;
804
805         return sprintf(buf, "%x\n", hpriv->cap);
806 }
807
808 static ssize_t ahci_show_host_cap2(struct device *dev,
809                                    struct device_attribute *attr, char *buf)
810 {
811         struct Scsi_Host *shost = class_to_shost(dev);
812         struct ata_port *ap = ata_shost_to_port(shost);
813         struct ahci_host_priv *hpriv = ap->host->private_data;
814
815         return sprintf(buf, "%x\n", hpriv->cap2);
816 }
817
818 static ssize_t ahci_show_host_version(struct device *dev,
819                                    struct device_attribute *attr, char *buf)
820 {
821         struct Scsi_Host *shost = class_to_shost(dev);
822         struct ata_port *ap = ata_shost_to_port(shost);
823         void __iomem *mmio = ap->host->iomap[AHCI_PCI_BAR];
824
825         return sprintf(buf, "%x\n", readl(mmio + HOST_VERSION));
826 }
827
828 static ssize_t ahci_show_port_cmd(struct device *dev,
829                                   struct device_attribute *attr, char *buf)
830 {
831         struct Scsi_Host *shost = class_to_shost(dev);
832         struct ata_port *ap = ata_shost_to_port(shost);
833         void __iomem *port_mmio = ahci_port_base(ap);
834
835         return sprintf(buf, "%x\n", readl(port_mmio + PORT_CMD));
836 }
837
838 /**
839  *      ahci_save_initial_config - Save and fixup initial config values
840  *      @pdev: target PCI device
841  *      @hpriv: host private area to store config values
842  *
843  *      Some registers containing configuration info might be setup by
844  *      BIOS and might be cleared on reset.  This function saves the
845  *      initial values of those registers into @hpriv such that they
846  *      can be restored after controller reset.
847  *
848  *      If inconsistent, config values are fixed up by this function.
849  *
850  *      LOCKING:
851  *      None.
852  */
853 static void ahci_save_initial_config(struct pci_dev *pdev,
854                                      struct ahci_host_priv *hpriv)
855 {
856         void __iomem *mmio = pcim_iomap_table(pdev)[AHCI_PCI_BAR];
857         u32 cap, cap2, vers, port_map;
858         int i;
859         int mv;
860
861         /* make sure AHCI mode is enabled before accessing CAP */
862         ahci_enable_ahci(mmio);
863
864         /* Values prefixed with saved_ are written back to host after
865          * reset.  Values without are used for driver operation.
866          */
867         hpriv->saved_cap = cap = readl(mmio + HOST_CAP);
868         hpriv->saved_port_map = port_map = readl(mmio + HOST_PORTS_IMPL);
869
870         /* CAP2 register is only defined for AHCI 1.2 and later */
871         vers = readl(mmio + HOST_VERSION);
872         if ((vers >> 16) > 1 ||
873            ((vers >> 16) == 1 && (vers & 0xFFFF) >= 0x200))
874                 hpriv->saved_cap2 = cap2 = readl(mmio + HOST_CAP2);
875         else
876                 hpriv->saved_cap2 = cap2 = 0;
877
878         /* some chips have errata preventing 64bit use */
879         if ((cap & HOST_CAP_64) && (hpriv->flags & AHCI_HFLAG_32BIT_ONLY)) {
880                 dev_printk(KERN_INFO, &pdev->dev,
881                            "controller can't do 64bit DMA, forcing 32bit\n");
882                 cap &= ~HOST_CAP_64;
883         }
884
885         if ((cap & HOST_CAP_NCQ) && (hpriv->flags & AHCI_HFLAG_NO_NCQ)) {
886                 dev_printk(KERN_INFO, &pdev->dev,
887                            "controller can't do NCQ, turning off CAP_NCQ\n");
888                 cap &= ~HOST_CAP_NCQ;
889         }
890
891         if (!(cap & HOST_CAP_NCQ) && (hpriv->flags & AHCI_HFLAG_YES_NCQ)) {
892                 dev_printk(KERN_INFO, &pdev->dev,
893                            "controller can do NCQ, turning on CAP_NCQ\n");
894                 cap |= HOST_CAP_NCQ;
895         }
896
897         if ((cap & HOST_CAP_PMP) && (hpriv->flags & AHCI_HFLAG_NO_PMP)) {
898                 dev_printk(KERN_INFO, &pdev->dev,
899                            "controller can't do PMP, turning off CAP_PMP\n");
900                 cap &= ~HOST_CAP_PMP;
901         }
902
903         if ((cap & HOST_CAP_SNTF) && (hpriv->flags & AHCI_HFLAG_NO_SNTF)) {
904                 dev_printk(KERN_INFO, &pdev->dev,
905                            "controller can't do SNTF, turning off CAP_SNTF\n");
906                 cap &= ~HOST_CAP_SNTF;
907         }
908
909         if (pdev->vendor == PCI_VENDOR_ID_JMICRON && pdev->device == 0x2361 &&
910             port_map != 1) {
911                 dev_printk(KERN_INFO, &pdev->dev,
912                            "JMB361 has only one port, port_map 0x%x -> 0x%x\n",
913                            port_map, 1);
914                 port_map = 1;
915         }
916
917         /*
918          * Temporary Marvell 6145 hack: PATA port presence
919          * is asserted through the standard AHCI port
920          * presence register, as bit 4 (counting from 0)
921          */
922         if (hpriv->flags & AHCI_HFLAG_MV_PATA) {
923                 if (pdev->device == 0x6121)
924                         mv = 0x3;
925                 else
926                         mv = 0xf;
927                 dev_printk(KERN_ERR, &pdev->dev,
928                            "MV_AHCI HACK: port_map %x -> %x\n",
929                            port_map,
930                            port_map & mv);
931                 dev_printk(KERN_ERR, &pdev->dev,
932                           "Disabling your PATA port. Use the boot option 'ahci.marvell_enable=0' to avoid this.\n");
933
934                 port_map &= mv;
935         }
936
937         /* cross check port_map and cap.n_ports */
938         if (port_map) {
939                 int map_ports = 0;
940
941                 for (i = 0; i < AHCI_MAX_PORTS; i++)
942                         if (port_map & (1 << i))
943                                 map_ports++;
944
945                 /* If PI has more ports than n_ports, whine, clear
946                  * port_map and let it be generated from n_ports.
947                  */
948                 if (map_ports > ahci_nr_ports(cap)) {
949                         dev_printk(KERN_WARNING, &pdev->dev,
950                                    "implemented port map (0x%x) contains more "
951                                    "ports than nr_ports (%u), using nr_ports\n",
952                                    port_map, ahci_nr_ports(cap));
953                         port_map = 0;
954                 }
955         }
956
957         /* fabricate port_map from cap.nr_ports */
958         if (!port_map) {
959                 port_map = (1 << ahci_nr_ports(cap)) - 1;
960                 dev_printk(KERN_WARNING, &pdev->dev,
961                            "forcing PORTS_IMPL to 0x%x\n", port_map);
962
963                 /* write the fixed up value to the PI register */
964                 hpriv->saved_port_map = port_map;
965         }
966
967         /* record values to use during operation */
968         hpriv->cap = cap;
969         hpriv->cap2 = cap2;
970         hpriv->port_map = port_map;
971 }
972
973 /**
974  *      ahci_restore_initial_config - Restore initial config
975  *      @host: target ATA host
976  *
977  *      Restore initial config stored by ahci_save_initial_config().
978  *
979  *      LOCKING:
980  *      None.
981  */
982 static void ahci_restore_initial_config(struct ata_host *host)
983 {
984         struct ahci_host_priv *hpriv = host->private_data;
985         void __iomem *mmio = host->iomap[AHCI_PCI_BAR];
986
987         writel(hpriv->saved_cap, mmio + HOST_CAP);
988         if (hpriv->saved_cap2)
989                 writel(hpriv->saved_cap2, mmio + HOST_CAP2);
990         writel(hpriv->saved_port_map, mmio + HOST_PORTS_IMPL);
991         (void) readl(mmio + HOST_PORTS_IMPL);   /* flush */
992 }
993
994 static unsigned ahci_scr_offset(struct ata_port *ap, unsigned int sc_reg)
995 {
996         static const int offset[] = {
997                 [SCR_STATUS]            = PORT_SCR_STAT,
998                 [SCR_CONTROL]           = PORT_SCR_CTL,
999                 [SCR_ERROR]             = PORT_SCR_ERR,
1000                 [SCR_ACTIVE]            = PORT_SCR_ACT,
1001                 [SCR_NOTIFICATION]      = PORT_SCR_NTF,
1002         };
1003         struct ahci_host_priv *hpriv = ap->host->private_data;
1004
1005         if (sc_reg < ARRAY_SIZE(offset) &&
1006             (sc_reg != SCR_NOTIFICATION || (hpriv->cap & HOST_CAP_SNTF)))
1007                 return offset[sc_reg];
1008         return 0;
1009 }
1010
1011 static int ahci_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val)
1012 {
1013         void __iomem *port_mmio = ahci_port_base(link->ap);
1014         int offset = ahci_scr_offset(link->ap, sc_reg);
1015
1016         if (offset) {
1017                 *val = readl(port_mmio + offset);
1018                 return 0;
1019         }
1020         return -EINVAL;
1021 }
1022
1023 static int ahci_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val)
1024 {
1025         void __iomem *port_mmio = ahci_port_base(link->ap);
1026         int offset = ahci_scr_offset(link->ap, sc_reg);
1027
1028         if (offset) {
1029                 writel(val, port_mmio + offset);
1030                 return 0;
1031         }
1032         return -EINVAL;
1033 }
1034
1035 static void ahci_start_engine(struct ata_port *ap)
1036 {
1037         void __iomem *port_mmio = ahci_port_base(ap);
1038         u32 tmp;
1039
1040         /* start DMA */
1041         tmp = readl(port_mmio + PORT_CMD);
1042         tmp |= PORT_CMD_START;
1043         writel(tmp, port_mmio + PORT_CMD);
1044         readl(port_mmio + PORT_CMD); /* flush */
1045 }
1046
1047 static int ahci_stop_engine(struct ata_port *ap)
1048 {
1049         void __iomem *port_mmio = ahci_port_base(ap);
1050         u32 tmp;
1051
1052         tmp = readl(port_mmio + PORT_CMD);
1053
1054         /* check if the HBA is idle */
1055         if ((tmp & (PORT_CMD_START | PORT_CMD_LIST_ON)) == 0)
1056                 return 0;
1057
1058         /* setting HBA to idle */
1059         tmp &= ~PORT_CMD_START;
1060         writel(tmp, port_mmio + PORT_CMD);
1061
1062         /* wait for engine to stop. This could be as long as 500 msec */
1063         tmp = ata_wait_register(port_mmio + PORT_CMD,
1064                                 PORT_CMD_LIST_ON, PORT_CMD_LIST_ON, 1, 500);
1065         if (tmp & PORT_CMD_LIST_ON)
1066                 return -EIO;
1067
1068         return 0;
1069 }
1070
1071 static void ahci_start_fis_rx(struct ata_port *ap)
1072 {
1073         void __iomem *port_mmio = ahci_port_base(ap);
1074         struct ahci_host_priv *hpriv = ap->host->private_data;
1075         struct ahci_port_priv *pp = ap->private_data;
1076         u32 tmp;
1077
1078         /* set FIS registers */
1079         if (hpriv->cap & HOST_CAP_64)
1080                 writel((pp->cmd_slot_dma >> 16) >> 16,
1081                        port_mmio + PORT_LST_ADDR_HI);
1082         writel(pp->cmd_slot_dma & 0xffffffff, port_mmio + PORT_LST_ADDR);
1083
1084         if (hpriv->cap & HOST_CAP_64)
1085                 writel((pp->rx_fis_dma >> 16) >> 16,
1086                        port_mmio + PORT_FIS_ADDR_HI);
1087         writel(pp->rx_fis_dma & 0xffffffff, port_mmio + PORT_FIS_ADDR);
1088
1089         /* enable FIS reception */
1090         tmp = readl(port_mmio + PORT_CMD);
1091         tmp |= PORT_CMD_FIS_RX;
1092         writel(tmp, port_mmio + PORT_CMD);
1093
1094         /* flush */
1095         readl(port_mmio + PORT_CMD);
1096 }
1097
1098 static int ahci_stop_fis_rx(struct ata_port *ap)
1099 {
1100         void __iomem *port_mmio = ahci_port_base(ap);
1101         u32 tmp;
1102
1103         /* disable FIS reception */
1104         tmp = readl(port_mmio + PORT_CMD);
1105         tmp &= ~PORT_CMD_FIS_RX;
1106         writel(tmp, port_mmio + PORT_CMD);
1107
1108         /* wait for completion, spec says 500ms, give it 1000 */
1109         tmp = ata_wait_register(port_mmio + PORT_CMD, PORT_CMD_FIS_ON,
1110                                 PORT_CMD_FIS_ON, 10, 1000);
1111         if (tmp & PORT_CMD_FIS_ON)
1112                 return -EBUSY;
1113
1114         return 0;
1115 }
1116
1117 static void ahci_power_up(struct ata_port *ap)
1118 {
1119         struct ahci_host_priv *hpriv = ap->host->private_data;
1120         void __iomem *port_mmio = ahci_port_base(ap);
1121         u32 cmd;
1122
1123         cmd = readl(port_mmio + PORT_CMD) & ~PORT_CMD_ICC_MASK;
1124
1125         /* spin up device */
1126         if (hpriv->cap & HOST_CAP_SSS) {
1127                 cmd |= PORT_CMD_SPIN_UP;
1128                 writel(cmd, port_mmio + PORT_CMD);
1129         }
1130
1131         /* wake up link */
1132         writel(cmd | PORT_CMD_ICC_ACTIVE, port_mmio + PORT_CMD);
1133 }
1134
1135 static void ahci_disable_alpm(struct ata_port *ap)
1136 {
1137         struct ahci_host_priv *hpriv = ap->host->private_data;
1138         void __iomem *port_mmio = ahci_port_base(ap);
1139         u32 cmd;
1140         struct ahci_port_priv *pp = ap->private_data;
1141
1142         /* IPM bits should be disabled by libata-core */
1143         /* get the existing command bits */
1144         cmd = readl(port_mmio + PORT_CMD);
1145
1146         /* disable ALPM and ASP */
1147         cmd &= ~PORT_CMD_ASP;
1148         cmd &= ~PORT_CMD_ALPE;
1149
1150         /* force the interface back to active */
1151         cmd |= PORT_CMD_ICC_ACTIVE;
1152
1153         /* write out new cmd value */
1154         writel(cmd, port_mmio + PORT_CMD);
1155         cmd = readl(port_mmio + PORT_CMD);
1156
1157         /* wait 10ms to be sure we've come out of any low power state */
1158         msleep(10);
1159
1160         /* clear out any PhyRdy stuff from interrupt status */
1161         writel(PORT_IRQ_PHYRDY, port_mmio + PORT_IRQ_STAT);
1162
1163         /* go ahead and clean out PhyRdy Change from Serror too */
1164         ahci_scr_write(&ap->link, SCR_ERROR, ((1 << 16) | (1 << 18)));
1165
1166         /*
1167          * Clear flag to indicate that we should ignore all PhyRdy
1168          * state changes
1169          */
1170         hpriv->flags &= ~AHCI_HFLAG_NO_HOTPLUG;
1171
1172         /*
1173          * Enable interrupts on Phy Ready.
1174          */
1175         pp->intr_mask |= PORT_IRQ_PHYRDY;
1176         writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK);
1177
1178         /*
1179          * don't change the link pm policy - we can be called
1180          * just to turn of link pm temporarily
1181          */
1182 }
1183
1184 static int ahci_enable_alpm(struct ata_port *ap,
1185         enum link_pm policy)
1186 {
1187         struct ahci_host_priv *hpriv = ap->host->private_data;
1188         void __iomem *port_mmio = ahci_port_base(ap);
1189         u32 cmd;
1190         struct ahci_port_priv *pp = ap->private_data;
1191         u32 asp;
1192
1193         /* Make sure the host is capable of link power management */
1194         if (!(hpriv->cap & HOST_CAP_ALPM))
1195                 return -EINVAL;
1196
1197         switch (policy) {
1198         case MAX_PERFORMANCE:
1199         case NOT_AVAILABLE:
1200                 /*
1201                  * if we came here with NOT_AVAILABLE,
1202                  * it just means this is the first time we
1203                  * have tried to enable - default to max performance,
1204                  * and let the user go to lower power modes on request.
1205                  */
1206                 ahci_disable_alpm(ap);
1207                 return 0;
1208         case MIN_POWER:
1209                 /* configure HBA to enter SLUMBER */
1210                 asp = PORT_CMD_ASP;
1211                 break;
1212         case MEDIUM_POWER:
1213                 /* configure HBA to enter PARTIAL */
1214                 asp = 0;
1215                 break;
1216         default:
1217                 return -EINVAL;
1218         }
1219
1220         /*
1221          * Disable interrupts on Phy Ready. This keeps us from
1222          * getting woken up due to spurious phy ready interrupts
1223          * TBD - Hot plug should be done via polling now, is
1224          * that even supported?
1225          */
1226         pp->intr_mask &= ~PORT_IRQ_PHYRDY;
1227         writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK);
1228
1229         /*
1230          * Set a flag to indicate that we should ignore all PhyRdy
1231          * state changes since these can happen now whenever we
1232          * change link state
1233          */
1234         hpriv->flags |= AHCI_HFLAG_NO_HOTPLUG;
1235
1236         /* get the existing command bits */
1237         cmd = readl(port_mmio + PORT_CMD);
1238
1239         /*
1240          * Set ASP based on Policy
1241          */
1242         cmd |= asp;
1243
1244         /*
1245          * Setting this bit will instruct the HBA to aggressively
1246          * enter a lower power link state when it's appropriate and
1247          * based on the value set above for ASP
1248          */
1249         cmd |= PORT_CMD_ALPE;
1250
1251         /* write out new cmd value */
1252         writel(cmd, port_mmio + PORT_CMD);
1253         cmd = readl(port_mmio + PORT_CMD);
1254
1255         /* IPM bits should be set by libata-core */
1256         return 0;
1257 }
1258
1259 #ifdef CONFIG_PM
1260 static void ahci_power_down(struct ata_port *ap)
1261 {
1262         struct ahci_host_priv *hpriv = ap->host->private_data;
1263         void __iomem *port_mmio = ahci_port_base(ap);
1264         u32 cmd, scontrol;
1265
1266         if (!(hpriv->cap & HOST_CAP_SSS))
1267                 return;
1268
1269         /* put device into listen mode, first set PxSCTL.DET to 0 */
1270         scontrol = readl(port_mmio + PORT_SCR_CTL);
1271         scontrol &= ~0xf;
1272         writel(scontrol, port_mmio + PORT_SCR_CTL);
1273
1274         /* then set PxCMD.SUD to 0 */
1275         cmd = readl(port_mmio + PORT_CMD) & ~PORT_CMD_ICC_MASK;
1276         cmd &= ~PORT_CMD_SPIN_UP;
1277         writel(cmd, port_mmio + PORT_CMD);
1278 }
1279 #endif
1280
1281 static void ahci_start_port(struct ata_port *ap)
1282 {
1283         struct ahci_port_priv *pp = ap->private_data;
1284         struct ata_link *link;
1285         struct ahci_em_priv *emp;
1286         ssize_t rc;
1287         int i;
1288
1289         /* enable FIS reception */
1290         ahci_start_fis_rx(ap);
1291
1292         /* enable DMA */
1293         ahci_start_engine(ap);
1294
1295         /* turn on LEDs */
1296         if (ap->flags & ATA_FLAG_EM) {
1297                 ata_for_each_link(link, ap, EDGE) {
1298                         emp = &pp->em_priv[link->pmp];
1299
1300                         /* EM Transmit bit maybe busy during init */
1301                         for (i = 0; i < EM_MAX_RETRY; i++) {
1302                                 rc = ahci_transmit_led_message(ap,
1303                                                                emp->led_state,
1304                                                                4);
1305                                 if (rc == -EBUSY)
1306                                         msleep(1);
1307                                 else
1308                                         break;
1309                         }
1310                 }
1311         }
1312
1313         if (ap->flags & ATA_FLAG_SW_ACTIVITY)
1314                 ata_for_each_link(link, ap, EDGE)
1315                         ahci_init_sw_activity(link);
1316
1317 }
1318
1319 static int ahci_deinit_port(struct ata_port *ap, const char **emsg)
1320 {
1321         int rc;
1322
1323         /* disable DMA */
1324         rc = ahci_stop_engine(ap);
1325         if (rc) {
1326                 *emsg = "failed to stop engine";
1327                 return rc;
1328         }
1329
1330         /* disable FIS reception */
1331         rc = ahci_stop_fis_rx(ap);
1332         if (rc) {
1333                 *emsg = "failed stop FIS RX";
1334                 return rc;
1335         }
1336
1337         return 0;
1338 }
1339
1340 static int ahci_reset_controller(struct ata_host *host)
1341 {
1342         struct pci_dev *pdev = to_pci_dev(host->dev);
1343         struct ahci_host_priv *hpriv = host->private_data;
1344         void __iomem *mmio = host->iomap[AHCI_PCI_BAR];
1345         u32 tmp;
1346
1347         /* we must be in AHCI mode, before using anything
1348          * AHCI-specific, such as HOST_RESET.
1349          */
1350         ahci_enable_ahci(mmio);
1351
1352         /* global controller reset */
1353         if (!ahci_skip_host_reset) {
1354                 tmp = readl(mmio + HOST_CTL);
1355                 if ((tmp & HOST_RESET) == 0) {
1356                         writel(tmp | HOST_RESET, mmio + HOST_CTL);
1357                         readl(mmio + HOST_CTL); /* flush */
1358                 }
1359
1360                 /*
1361                  * to perform host reset, OS should set HOST_RESET
1362                  * and poll until this bit is read to be "0".
1363                  * reset must complete within 1 second, or
1364                  * the hardware should be considered fried.
1365                  */
1366                 tmp = ata_wait_register(mmio + HOST_CTL, HOST_RESET,
1367                                         HOST_RESET, 10, 1000);
1368
1369                 if (tmp & HOST_RESET) {
1370                         dev_printk(KERN_ERR, host->dev,
1371                                    "controller reset failed (0x%x)\n", tmp);
1372                         return -EIO;
1373                 }
1374
1375                 /* turn on AHCI mode */
1376                 ahci_enable_ahci(mmio);
1377
1378                 /* Some registers might be cleared on reset.  Restore
1379                  * initial values.
1380                  */
1381                 ahci_restore_initial_config(host);
1382         } else
1383                 dev_printk(KERN_INFO, host->dev,
1384                            "skipping global host reset\n");
1385
1386         if (pdev->vendor == PCI_VENDOR_ID_INTEL) {
1387                 u16 tmp16;
1388
1389                 /* configure PCS */
1390                 pci_read_config_word(pdev, 0x92, &tmp16);
1391                 if ((tmp16 & hpriv->port_map) != hpriv->port_map) {
1392                         tmp16 |= hpriv->port_map;
1393                         pci_write_config_word(pdev, 0x92, tmp16);
1394                 }
1395         }
1396
1397         return 0;
1398 }
1399
1400 static void ahci_sw_activity(struct ata_link *link)
1401 {
1402         struct ata_port *ap = link->ap;
1403         struct ahci_port_priv *pp = ap->private_data;
1404         struct ahci_em_priv *emp = &pp->em_priv[link->pmp];
1405
1406         if (!(link->flags & ATA_LFLAG_SW_ACTIVITY))
1407                 return;
1408
1409         emp->activity++;
1410         if (!timer_pending(&emp->timer))
1411                 mod_timer(&emp->timer, jiffies + msecs_to_jiffies(10));
1412 }
1413
1414 static void ahci_sw_activity_blink(unsigned long arg)
1415 {
1416         struct ata_link *link = (struct ata_link *)arg;
1417         struct ata_port *ap = link->ap;
1418         struct ahci_port_priv *pp = ap->private_data;
1419         struct ahci_em_priv *emp = &pp->em_priv[link->pmp];
1420         unsigned long led_message = emp->led_state;
1421         u32 activity_led_state;
1422         unsigned long flags;
1423
1424         led_message &= EM_MSG_LED_VALUE;
1425         led_message |= ap->port_no | (link->pmp << 8);
1426
1427         /* check to see if we've had activity.  If so,
1428          * toggle state of LED and reset timer.  If not,
1429          * turn LED to desired idle state.
1430          */
1431         spin_lock_irqsave(ap->lock, flags);
1432         if (emp->saved_activity != emp->activity) {
1433                 emp->saved_activity = emp->activity;
1434                 /* get the current LED state */
1435                 activity_led_state = led_message & EM_MSG_LED_VALUE_ON;
1436
1437                 if (activity_led_state)
1438                         activity_led_state = 0;
1439                 else
1440                         activity_led_state = 1;
1441
1442                 /* clear old state */
1443                 led_message &= ~EM_MSG_LED_VALUE_ACTIVITY;
1444
1445                 /* toggle state */
1446                 led_message |= (activity_led_state << 16);
1447                 mod_timer(&emp->timer, jiffies + msecs_to_jiffies(100));
1448         } else {
1449                 /* switch to idle */
1450                 led_message &= ~EM_MSG_LED_VALUE_ACTIVITY;
1451                 if (emp->blink_policy == BLINK_OFF)
1452                         led_message |= (1 << 16);
1453         }
1454         spin_unlock_irqrestore(ap->lock, flags);
1455         ahci_transmit_led_message(ap, led_message, 4);
1456 }
1457
1458 static void ahci_init_sw_activity(struct ata_link *link)
1459 {
1460         struct ata_port *ap = link->ap;
1461         struct ahci_port_priv *pp = ap->private_data;
1462         struct ahci_em_priv *emp = &pp->em_priv[link->pmp];
1463
1464         /* init activity stats, setup timer */
1465         emp->saved_activity = emp->activity = 0;
1466         setup_timer(&emp->timer, ahci_sw_activity_blink, (unsigned long)link);
1467
1468         /* check our blink policy and set flag for link if it's enabled */
1469         if (emp->blink_policy)
1470                 link->flags |= ATA_LFLAG_SW_ACTIVITY;
1471 }
1472
1473 static int ahci_reset_em(struct ata_host *host)
1474 {
1475         void __iomem *mmio = host->iomap[AHCI_PCI_BAR];
1476         u32 em_ctl;
1477
1478         em_ctl = readl(mmio + HOST_EM_CTL);
1479         if ((em_ctl & EM_CTL_TM) || (em_ctl & EM_CTL_RST))
1480                 return -EINVAL;
1481
1482         writel(em_ctl | EM_CTL_RST, mmio + HOST_EM_CTL);
1483         return 0;
1484 }
1485
1486 static ssize_t ahci_transmit_led_message(struct ata_port *ap, u32 state,
1487                                         ssize_t size)
1488 {
1489         struct ahci_host_priv *hpriv = ap->host->private_data;
1490         struct ahci_port_priv *pp = ap->private_data;
1491         void __iomem *mmio = ap->host->iomap[AHCI_PCI_BAR];
1492         u32 em_ctl;
1493         u32 message[] = {0, 0};
1494         unsigned long flags;
1495         int pmp;
1496         struct ahci_em_priv *emp;
1497
1498         /* get the slot number from the message */
1499         pmp = (state & EM_MSG_LED_PMP_SLOT) >> 8;
1500         if (pmp < EM_MAX_SLOTS)
1501                 emp = &pp->em_priv[pmp];
1502         else
1503                 return -EINVAL;
1504
1505         spin_lock_irqsave(ap->lock, flags);
1506
1507         /*
1508          * if we are still busy transmitting a previous message,
1509          * do not allow
1510          */
1511         em_ctl = readl(mmio + HOST_EM_CTL);
1512         if (em_ctl & EM_CTL_TM) {
1513                 spin_unlock_irqrestore(ap->lock, flags);
1514                 return -EBUSY;
1515         }
1516
1517         /*
1518          * create message header - this is all zero except for
1519          * the message size, which is 4 bytes.
1520          */
1521         message[0] |= (4 << 8);
1522
1523         /* ignore 0:4 of byte zero, fill in port info yourself */
1524         message[1] = ((state & ~EM_MSG_LED_HBA_PORT) | ap->port_no);
1525
1526         /* write message to EM_LOC */
1527         writel(message[0], mmio + hpriv->em_loc);
1528         writel(message[1], mmio + hpriv->em_loc+4);
1529
1530         /* save off new led state for port/slot */
1531         emp->led_state = state;
1532
1533         /*
1534          * tell hardware to transmit the message
1535          */
1536         writel(em_ctl | EM_CTL_TM, mmio + HOST_EM_CTL);
1537
1538         spin_unlock_irqrestore(ap->lock, flags);
1539         return size;
1540 }
1541
1542 static ssize_t ahci_led_show(struct ata_port *ap, char *buf)
1543 {
1544         struct ahci_port_priv *pp = ap->private_data;
1545         struct ata_link *link;
1546         struct ahci_em_priv *emp;
1547         int rc = 0;
1548
1549         ata_for_each_link(link, ap, EDGE) {
1550                 emp = &pp->em_priv[link->pmp];
1551                 rc += sprintf(buf, "%lx\n", emp->led_state);
1552         }
1553         return rc;
1554 }
1555
1556 static ssize_t ahci_led_store(struct ata_port *ap, const char *buf,
1557                                 size_t size)
1558 {
1559         int state;
1560         int pmp;
1561         struct ahci_port_priv *pp = ap->private_data;
1562         struct ahci_em_priv *emp;
1563
1564         state = simple_strtoul(buf, NULL, 0);
1565
1566         /* get the slot number from the message */
1567         pmp = (state & EM_MSG_LED_PMP_SLOT) >> 8;
1568         if (pmp < EM_MAX_SLOTS)
1569                 emp = &pp->em_priv[pmp];
1570         else
1571                 return -EINVAL;
1572
1573         /* mask off the activity bits if we are in sw_activity
1574          * mode, user should turn off sw_activity before setting
1575          * activity led through em_message
1576          */
1577         if (emp->blink_policy)
1578                 state &= ~EM_MSG_LED_VALUE_ACTIVITY;
1579
1580         return ahci_transmit_led_message(ap, state, size);
1581 }
1582
1583 static ssize_t ahci_activity_store(struct ata_device *dev, enum sw_activity val)
1584 {
1585         struct ata_link *link = dev->link;
1586         struct ata_port *ap = link->ap;
1587         struct ahci_port_priv *pp = ap->private_data;
1588         struct ahci_em_priv *emp = &pp->em_priv[link->pmp];
1589         u32 port_led_state = emp->led_state;
1590
1591         /* save the desired Activity LED behavior */
1592         if (val == OFF) {
1593                 /* clear LFLAG */
1594                 link->flags &= ~(ATA_LFLAG_SW_ACTIVITY);
1595
1596                 /* set the LED to OFF */
1597                 port_led_state &= EM_MSG_LED_VALUE_OFF;
1598                 port_led_state |= (ap->port_no | (link->pmp << 8));
1599                 ahci_transmit_led_message(ap, port_led_state, 4);
1600         } else {
1601                 link->flags |= ATA_LFLAG_SW_ACTIVITY;
1602                 if (val == BLINK_OFF) {
1603                         /* set LED to ON for idle */
1604                         port_led_state &= EM_MSG_LED_VALUE_OFF;
1605                         port_led_state |= (ap->port_no | (link->pmp << 8));
1606                         port_led_state |= EM_MSG_LED_VALUE_ON; /* check this */
1607                         ahci_transmit_led_message(ap, port_led_state, 4);
1608                 }
1609         }
1610         emp->blink_policy = val;
1611         return 0;
1612 }
1613
1614 static ssize_t ahci_activity_show(struct ata_device *dev, char *buf)
1615 {
1616         struct ata_link *link = dev->link;
1617         struct ata_port *ap = link->ap;
1618         struct ahci_port_priv *pp = ap->private_data;
1619         struct ahci_em_priv *emp = &pp->em_priv[link->pmp];
1620
1621         /* display the saved value of activity behavior for this
1622          * disk.
1623          */
1624         return sprintf(buf, "%d\n", emp->blink_policy);
1625 }
1626
1627 static void ahci_port_init(struct pci_dev *pdev, struct ata_port *ap,
1628                            int port_no, void __iomem *mmio,
1629                            void __iomem *port_mmio)
1630 {
1631         const char *emsg = NULL;
1632         int rc;
1633         u32 tmp;
1634
1635         /* make sure port is not active */
1636         rc = ahci_deinit_port(ap, &emsg);
1637         if (rc)
1638                 dev_printk(KERN_WARNING, &pdev->dev,
1639                            "%s (%d)\n", emsg, rc);
1640
1641         /* clear SError */
1642         tmp = readl(port_mmio + PORT_SCR_ERR);
1643         VPRINTK("PORT_SCR_ERR 0x%x\n", tmp);
1644         writel(tmp, port_mmio + PORT_SCR_ERR);
1645
1646         /* clear port IRQ */
1647         tmp = readl(port_mmio + PORT_IRQ_STAT);
1648         VPRINTK("PORT_IRQ_STAT 0x%x\n", tmp);
1649         if (tmp)
1650                 writel(tmp, port_mmio + PORT_IRQ_STAT);
1651
1652         writel(1 << port_no, mmio + HOST_IRQ_STAT);
1653 }
1654
1655 static void ahci_init_controller(struct ata_host *host)
1656 {
1657         struct ahci_host_priv *hpriv = host->private_data;
1658         struct pci_dev *pdev = to_pci_dev(host->dev);
1659         void __iomem *mmio = host->iomap[AHCI_PCI_BAR];
1660         int i;
1661         void __iomem *port_mmio;
1662         u32 tmp;
1663         int mv;
1664
1665         if (hpriv->flags & AHCI_HFLAG_MV_PATA) {
1666                 if (pdev->device == 0x6121)
1667                         mv = 2;
1668                 else
1669                         mv = 4;
1670                 port_mmio = __ahci_port_base(host, mv);
1671
1672                 writel(0, port_mmio + PORT_IRQ_MASK);
1673
1674                 /* clear port IRQ */
1675                 tmp = readl(port_mmio + PORT_IRQ_STAT);
1676                 VPRINTK("PORT_IRQ_STAT 0x%x\n", tmp);
1677                 if (tmp)
1678                         writel(tmp, port_mmio + PORT_IRQ_STAT);
1679         }
1680
1681         for (i = 0; i < host->n_ports; i++) {
1682                 struct ata_port *ap = host->ports[i];
1683
1684                 port_mmio = ahci_port_base(ap);
1685                 if (ata_port_is_dummy(ap))
1686                         continue;
1687
1688                 ahci_port_init(pdev, ap, i, mmio, port_mmio);
1689         }
1690
1691         tmp = readl(mmio + HOST_CTL);
1692         VPRINTK("HOST_CTL 0x%x\n", tmp);
1693         writel(tmp | HOST_IRQ_EN, mmio + HOST_CTL);
1694         tmp = readl(mmio + HOST_CTL);
1695         VPRINTK("HOST_CTL 0x%x\n", tmp);
1696 }
1697
1698 static void ahci_dev_config(struct ata_device *dev)
1699 {
1700         struct ahci_host_priv *hpriv = dev->link->ap->host->private_data;
1701
1702         if (hpriv->flags & AHCI_HFLAG_SECT255) {
1703                 dev->max_sectors = 255;
1704                 ata_dev_printk(dev, KERN_INFO,
1705                                "SB600 AHCI: limiting to 255 sectors per cmd\n");
1706         }
1707 }
1708
1709 static unsigned int ahci_dev_classify(struct ata_port *ap)
1710 {
1711         void __iomem *port_mmio = ahci_port_base(ap);
1712         struct ata_taskfile tf;
1713         u32 tmp;
1714
1715         tmp = readl(port_mmio + PORT_SIG);
1716         tf.lbah         = (tmp >> 24)   & 0xff;
1717         tf.lbam         = (tmp >> 16)   & 0xff;
1718         tf.lbal         = (tmp >> 8)    & 0xff;
1719         tf.nsect        = (tmp)         & 0xff;
1720
1721         return ata_dev_classify(&tf);
1722 }
1723
1724 static void ahci_fill_cmd_slot(struct ahci_port_priv *pp, unsigned int tag,
1725                                u32 opts)
1726 {
1727         dma_addr_t cmd_tbl_dma;
1728
1729         cmd_tbl_dma = pp->cmd_tbl_dma + tag * AHCI_CMD_TBL_SZ;
1730
1731         pp->cmd_slot[tag].opts = cpu_to_le32(opts);
1732         pp->cmd_slot[tag].status = 0;
1733         pp->cmd_slot[tag].tbl_addr = cpu_to_le32(cmd_tbl_dma & 0xffffffff);
1734         pp->cmd_slot[tag].tbl_addr_hi = cpu_to_le32((cmd_tbl_dma >> 16) >> 16);
1735 }
1736
1737 static int ahci_kick_engine(struct ata_port *ap)
1738 {
1739         void __iomem *port_mmio = ahci_port_base(ap);
1740         struct ahci_host_priv *hpriv = ap->host->private_data;
1741         u8 status = readl(port_mmio + PORT_TFDATA) & 0xFF;
1742         u32 tmp;
1743         int busy, rc;
1744
1745         /* stop engine */
1746         rc = ahci_stop_engine(ap);
1747         if (rc)
1748                 goto out_restart;
1749
1750         /* need to do CLO?
1751          * always do CLO if PMP is attached (AHCI-1.3 9.2)
1752          */
1753         busy = status & (ATA_BUSY | ATA_DRQ);
1754         if (!busy && !sata_pmp_attached(ap)) {
1755                 rc = 0;
1756                 goto out_restart;
1757         }
1758
1759         if (!(hpriv->cap & HOST_CAP_CLO)) {
1760                 rc = -EOPNOTSUPP;
1761                 goto out_restart;
1762         }
1763
1764         /* perform CLO */
1765         tmp = readl(port_mmio + PORT_CMD);
1766         tmp |= PORT_CMD_CLO;
1767         writel(tmp, port_mmio + PORT_CMD);
1768
1769         rc = 0;
1770         tmp = ata_wait_register(port_mmio + PORT_CMD,
1771                                 PORT_CMD_CLO, PORT_CMD_CLO, 1, 500);
1772         if (tmp & PORT_CMD_CLO)
1773                 rc = -EIO;
1774
1775         /* restart engine */
1776  out_restart:
1777         ahci_start_engine(ap);
1778         return rc;
1779 }
1780
1781 static int ahci_exec_polled_cmd(struct ata_port *ap, int pmp,
1782                                 struct ata_taskfile *tf, int is_cmd, u16 flags,
1783                                 unsigned long timeout_msec)
1784 {
1785         const u32 cmd_fis_len = 5; /* five dwords */
1786         struct ahci_port_priv *pp = ap->private_data;
1787         void __iomem *port_mmio = ahci_port_base(ap);
1788         u8 *fis = pp->cmd_tbl;
1789         u32 tmp;
1790
1791         /* prep the command */
1792         ata_tf_to_fis(tf, pmp, is_cmd, fis);
1793         ahci_fill_cmd_slot(pp, 0, cmd_fis_len | flags | (pmp << 12));
1794
1795         /* issue & wait */
1796         writel(1, port_mmio + PORT_CMD_ISSUE);
1797
1798         if (timeout_msec) {
1799                 tmp = ata_wait_register(port_mmio + PORT_CMD_ISSUE, 0x1, 0x1,
1800                                         1, timeout_msec);
1801                 if (tmp & 0x1) {
1802                         ahci_kick_engine(ap);
1803                         return -EBUSY;
1804                 }
1805         } else
1806                 readl(port_mmio + PORT_CMD_ISSUE);      /* flush */
1807
1808         return 0;
1809 }
1810
1811 static int ahci_do_softreset(struct ata_link *link, unsigned int *class,
1812                              int pmp, unsigned long deadline,
1813                              int (*check_ready)(struct ata_link *link))
1814 {
1815         struct ata_port *ap = link->ap;
1816         struct ahci_host_priv *hpriv = ap->host->private_data;
1817         const char *reason = NULL;
1818         unsigned long now, msecs;
1819         struct ata_taskfile tf;
1820         int rc;
1821
1822         DPRINTK("ENTER\n");
1823
1824         /* prepare for SRST (AHCI-1.1 10.4.1) */
1825         rc = ahci_kick_engine(ap);
1826         if (rc && rc != -EOPNOTSUPP)
1827                 ata_link_printk(link, KERN_WARNING,
1828                                 "failed to reset engine (errno=%d)\n", rc);
1829
1830         ata_tf_init(link->device, &tf);
1831
1832         /* issue the first D2H Register FIS */
1833         msecs = 0;
1834         now = jiffies;
1835         if (time_after(now, deadline))
1836                 msecs = jiffies_to_msecs(deadline - now);
1837
1838         tf.ctl |= ATA_SRST;
1839         if (ahci_exec_polled_cmd(ap, pmp, &tf, 0,
1840                                  AHCI_CMD_RESET | AHCI_CMD_CLR_BUSY, msecs)) {
1841                 rc = -EIO;
1842                 reason = "1st FIS failed";
1843                 goto fail;
1844         }
1845
1846         /* spec says at least 5us, but be generous and sleep for 1ms */
1847         msleep(1);
1848
1849         /* issue the second D2H Register FIS */
1850         tf.ctl &= ~ATA_SRST;
1851         ahci_exec_polled_cmd(ap, pmp, &tf, 0, 0, 0);
1852
1853         /* wait for link to become ready */
1854         rc = ata_wait_after_reset(link, deadline, check_ready);
1855         if (rc == -EBUSY && hpriv->flags & AHCI_HFLAG_SRST_TOUT_IS_OFFLINE) {
1856                 /*
1857                  * Workaround for cases where link online status can't
1858                  * be trusted.  Treat device readiness timeout as link
1859                  * offline.
1860                  */
1861                 ata_link_printk(link, KERN_INFO,
1862                                 "device not ready, treating as offline\n");
1863                 *class = ATA_DEV_NONE;
1864         } else if (rc) {
1865                 /* link occupied, -ENODEV too is an error */
1866                 reason = "device not ready";
1867                 goto fail;
1868         } else
1869                 *class = ahci_dev_classify(ap);
1870
1871         DPRINTK("EXIT, class=%u\n", *class);
1872         return 0;
1873
1874  fail:
1875         ata_link_printk(link, KERN_ERR, "softreset failed (%s)\n", reason);
1876         return rc;
1877 }
1878
1879 static int ahci_check_ready(struct ata_link *link)
1880 {
1881         void __iomem *port_mmio = ahci_port_base(link->ap);
1882         u8 status = readl(port_mmio + PORT_TFDATA) & 0xFF;
1883
1884         return ata_check_ready(status);
1885 }
1886
1887 static int ahci_softreset(struct ata_link *link, unsigned int *class,
1888                           unsigned long deadline)
1889 {
1890         int pmp = sata_srst_pmp(link);
1891
1892         DPRINTK("ENTER\n");
1893
1894         return ahci_do_softreset(link, class, pmp, deadline, ahci_check_ready);
1895 }
1896
1897 static int ahci_sb600_check_ready(struct ata_link *link)
1898 {
1899         void __iomem *port_mmio = ahci_port_base(link->ap);
1900         u8 status = readl(port_mmio + PORT_TFDATA) & 0xFF;
1901         u32 irq_status = readl(port_mmio + PORT_IRQ_STAT);
1902
1903         /*
1904          * There is no need to check TFDATA if BAD PMP is found due to HW bug,
1905          * which can save timeout delay.
1906          */
1907         if (irq_status & PORT_IRQ_BAD_PMP)
1908                 return -EIO;
1909
1910         return ata_check_ready(status);
1911 }
1912
1913 static int ahci_sb600_softreset(struct ata_link *link, unsigned int *class,
1914                                 unsigned long deadline)
1915 {
1916         struct ata_port *ap = link->ap;
1917         void __iomem *port_mmio = ahci_port_base(ap);
1918         int pmp = sata_srst_pmp(link);
1919         int rc;
1920         u32 irq_sts;
1921
1922         DPRINTK("ENTER\n");
1923
1924         rc = ahci_do_softreset(link, class, pmp, deadline,
1925                                ahci_sb600_check_ready);
1926
1927         /*
1928          * Soft reset fails on some ATI chips with IPMS set when PMP
1929          * is enabled but SATA HDD/ODD is connected to SATA port,
1930          * do soft reset again to port 0.
1931          */
1932         if (rc == -EIO) {
1933                 irq_sts = readl(port_mmio + PORT_IRQ_STAT);
1934                 if (irq_sts & PORT_IRQ_BAD_PMP) {
1935                         ata_link_printk(link, KERN_WARNING,
1936                                         "applying SB600 PMP SRST workaround "
1937                                         "and retrying\n");
1938                         rc = ahci_do_softreset(link, class, 0, deadline,
1939                                                ahci_check_ready);
1940                 }
1941         }
1942
1943         return rc;
1944 }
1945
1946 static int ahci_hardreset(struct ata_link *link, unsigned int *class,
1947                           unsigned long deadline)
1948 {
1949         const unsigned long *timing = sata_ehc_deb_timing(&link->eh_context);
1950         struct ata_port *ap = link->ap;
1951         struct ahci_port_priv *pp = ap->private_data;
1952         u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG;
1953         struct ata_taskfile tf;
1954         bool online;
1955         int rc;
1956
1957         DPRINTK("ENTER\n");
1958
1959         ahci_stop_engine(ap);
1960
1961         /* clear D2H reception area to properly wait for D2H FIS */
1962         ata_tf_init(link->device, &tf);
1963         tf.command = 0x80;
1964         ata_tf_to_fis(&tf, 0, 0, d2h_fis);
1965
1966         rc = sata_link_hardreset(link, timing, deadline, &online,
1967                                  ahci_check_ready);
1968
1969         ahci_start_engine(ap);
1970
1971         if (online)
1972                 *class = ahci_dev_classify(ap);
1973
1974         DPRINTK("EXIT, rc=%d, class=%u\n", rc, *class);
1975         return rc;
1976 }
1977
1978 static int ahci_vt8251_hardreset(struct ata_link *link, unsigned int *class,
1979                                  unsigned long deadline)
1980 {
1981         struct ata_port *ap = link->ap;
1982         bool online;
1983         int rc;
1984
1985         DPRINTK("ENTER\n");
1986
1987         ahci_stop_engine(ap);
1988
1989         rc = sata_link_hardreset(link, sata_ehc_deb_timing(&link->eh_context),
1990                                  deadline, &online, NULL);
1991
1992         ahci_start_engine(ap);
1993
1994         DPRINTK("EXIT, rc=%d, class=%u\n", rc, *class);
1995
1996         /* vt8251 doesn't clear BSY on signature FIS reception,
1997          * request follow-up softreset.
1998          */
1999         return online ? -EAGAIN : rc;
2000 }
2001
2002 static int ahci_p5wdh_hardreset(struct ata_link *link, unsigned int *class,
2003                                 unsigned long deadline)
2004 {
2005         struct ata_port *ap = link->ap;
2006         struct ahci_port_priv *pp = ap->private_data;
2007         u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG;
2008         struct ata_taskfile tf;
2009         bool online;
2010         int rc;
2011
2012         ahci_stop_engine(ap);
2013
2014         /* clear D2H reception area to properly wait for D2H FIS */
2015         ata_tf_init(link->device, &tf);
2016         tf.command = 0x80;
2017         ata_tf_to_fis(&tf, 0, 0, d2h_fis);
2018
2019         rc = sata_link_hardreset(link, sata_ehc_deb_timing(&link->eh_context),
2020                                  deadline, &online, NULL);
2021
2022         ahci_start_engine(ap);
2023
2024         /* The pseudo configuration device on SIMG4726 attached to
2025          * ASUS P5W-DH Deluxe doesn't send signature FIS after
2026          * hardreset if no device is attached to the first downstream
2027          * port && the pseudo device locks up on SRST w/ PMP==0.  To
2028          * work around this, wait for !BSY only briefly.  If BSY isn't
2029          * cleared, perform CLO and proceed to IDENTIFY (achieved by
2030          * ATA_LFLAG_NO_SRST and ATA_LFLAG_ASSUME_ATA).
2031          *
2032          * Wait for two seconds.  Devices attached to downstream port
2033          * which can't process the following IDENTIFY after this will
2034          * have to be reset again.  For most cases, this should
2035          * suffice while making probing snappish enough.
2036          */
2037         if (online) {
2038                 rc = ata_wait_after_reset(link, jiffies + 2 * HZ,
2039                                           ahci_check_ready);
2040                 if (rc)
2041                         ahci_kick_engine(ap);
2042         }
2043         return rc;
2044 }
2045
2046 static void ahci_postreset(struct ata_link *link, unsigned int *class)
2047 {
2048         struct ata_port *ap = link->ap;
2049         void __iomem *port_mmio = ahci_port_base(ap);
2050         u32 new_tmp, tmp;
2051
2052         ata_std_postreset(link, class);
2053
2054         /* Make sure port's ATAPI bit is set appropriately */
2055         new_tmp = tmp = readl(port_mmio + PORT_CMD);
2056         if (*class == ATA_DEV_ATAPI)
2057                 new_tmp |= PORT_CMD_ATAPI;
2058         else
2059                 new_tmp &= ~PORT_CMD_ATAPI;
2060         if (new_tmp != tmp) {
2061                 writel(new_tmp, port_mmio + PORT_CMD);
2062                 readl(port_mmio + PORT_CMD); /* flush */
2063         }
2064 }
2065
2066 static unsigned int ahci_fill_sg(struct ata_queued_cmd *qc, void *cmd_tbl)
2067 {
2068         struct scatterlist *sg;
2069         struct ahci_sg *ahci_sg = cmd_tbl + AHCI_CMD_TBL_HDR_SZ;
2070         unsigned int si;
2071
2072         VPRINTK("ENTER\n");
2073
2074         /*
2075          * Next, the S/G list.
2076          */
2077         for_each_sg(qc->sg, sg, qc->n_elem, si) {
2078                 dma_addr_t addr = sg_dma_address(sg);
2079                 u32 sg_len = sg_dma_len(sg);
2080
2081                 ahci_sg[si].addr = cpu_to_le32(addr & 0xffffffff);
2082                 ahci_sg[si].addr_hi = cpu_to_le32((addr >> 16) >> 16);
2083                 ahci_sg[si].flags_size = cpu_to_le32(sg_len - 1);
2084         }
2085
2086         return si;
2087 }
2088
2089 static int ahci_pmp_qc_defer(struct ata_queued_cmd *qc)
2090 {
2091         struct ata_port *ap = qc->ap;
2092         struct ahci_port_priv *pp = ap->private_data;
2093
2094         if (!sata_pmp_attached(ap) || pp->fbs_enabled)
2095                 return ata_std_qc_defer(qc);
2096         else
2097                 return sata_pmp_qc_defer_cmd_switch(qc);
2098 }
2099
2100 static void ahci_qc_prep(struct ata_queued_cmd *qc)
2101 {
2102         struct ata_port *ap = qc->ap;
2103         struct ahci_port_priv *pp = ap->private_data;
2104         int is_atapi = ata_is_atapi(qc->tf.protocol);
2105         void *cmd_tbl;
2106         u32 opts;
2107         const u32 cmd_fis_len = 5; /* five dwords */
2108         unsigned int n_elem;
2109
2110         /*
2111          * Fill in command table information.  First, the header,
2112          * a SATA Register - Host to Device command FIS.
2113          */
2114         cmd_tbl = pp->cmd_tbl + qc->tag * AHCI_CMD_TBL_SZ;
2115
2116         ata_tf_to_fis(&qc->tf, qc->dev->link->pmp, 1, cmd_tbl);
2117         if (is_atapi) {
2118                 memset(cmd_tbl + AHCI_CMD_TBL_CDB, 0, 32);
2119                 memcpy(cmd_tbl + AHCI_CMD_TBL_CDB, qc->cdb, qc->dev->cdb_len);
2120         }
2121
2122         n_elem = 0;
2123         if (qc->flags & ATA_QCFLAG_DMAMAP)
2124                 n_elem = ahci_fill_sg(qc, cmd_tbl);
2125
2126         /*
2127          * Fill in command slot information.
2128          */
2129         opts = cmd_fis_len | n_elem << 16 | (qc->dev->link->pmp << 12);
2130         if (qc->tf.flags & ATA_TFLAG_WRITE)
2131                 opts |= AHCI_CMD_WRITE;
2132         if (is_atapi)
2133                 opts |= AHCI_CMD_ATAPI | AHCI_CMD_PREFETCH;
2134
2135         ahci_fill_cmd_slot(pp, qc->tag, opts);
2136 }
2137
2138 static void ahci_fbs_dec_intr(struct ata_port *ap)
2139 {
2140         struct ahci_port_priv *pp = ap->private_data;
2141         void __iomem *port_mmio = ahci_port_base(ap);
2142         u32 fbs = readl(port_mmio + PORT_FBS);
2143         int retries = 3;
2144
2145         DPRINTK("ENTER\n");
2146         BUG_ON(!pp->fbs_enabled);
2147
2148         /* time to wait for DEC is not specified by AHCI spec,
2149          * add a retry loop for safety.
2150          */
2151         writel(fbs | PORT_FBS_DEC, port_mmio + PORT_FBS);
2152         fbs = readl(port_mmio + PORT_FBS);
2153         while ((fbs & PORT_FBS_DEC) && retries--) {
2154                 udelay(1);
2155                 fbs = readl(port_mmio + PORT_FBS);
2156         }
2157
2158         if (fbs & PORT_FBS_DEC)
2159                 dev_printk(KERN_ERR, ap->host->dev,
2160                            "failed to clear device error\n");
2161 }
2162
2163 static void ahci_error_intr(struct ata_port *ap, u32 irq_stat)
2164 {
2165         struct ahci_host_priv *hpriv = ap->host->private_data;
2166         struct ahci_port_priv *pp = ap->private_data;
2167         struct ata_eh_info *host_ehi = &ap->link.eh_info;
2168         struct ata_link *link = NULL;
2169         struct ata_queued_cmd *active_qc;
2170         struct ata_eh_info *active_ehi;
2171         bool fbs_need_dec = false;
2172         u32 serror;
2173
2174         /* determine active link with error */
2175         if (pp->fbs_enabled) {
2176                 void __iomem *port_mmio = ahci_port_base(ap);
2177                 u32 fbs = readl(port_mmio + PORT_FBS);
2178                 int pmp = fbs >> PORT_FBS_DWE_OFFSET;
2179
2180                 if ((fbs & PORT_FBS_SDE) && (pmp < ap->nr_pmp_links) &&
2181                     ata_link_online(&ap->pmp_link[pmp])) {
2182                         link = &ap->pmp_link[pmp];
2183                         fbs_need_dec = true;
2184                 }
2185
2186         } else
2187                 ata_for_each_link(link, ap, EDGE)
2188                         if (ata_link_active(link))
2189                                 break;
2190
2191         if (!link)
2192                 link = &ap->link;
2193
2194         active_qc = ata_qc_from_tag(ap, link->active_tag);
2195         active_ehi = &link->eh_info;
2196
2197         /* record irq stat */
2198         ata_ehi_clear_desc(host_ehi);
2199         ata_ehi_push_desc(host_ehi, "irq_stat 0x%08x", irq_stat);
2200
2201         /* AHCI needs SError cleared; otherwise, it might lock up */
2202         ahci_scr_read(&ap->link, SCR_ERROR, &serror);
2203         ahci_scr_write(&ap->link, SCR_ERROR, serror);
2204         host_ehi->serror |= serror;
2205
2206         /* some controllers set IRQ_IF_ERR on device errors, ignore it */
2207         if (hpriv->flags & AHCI_HFLAG_IGN_IRQ_IF_ERR)
2208                 irq_stat &= ~PORT_IRQ_IF_ERR;
2209
2210         if (irq_stat & PORT_IRQ_TF_ERR) {
2211                 /* If qc is active, charge it; otherwise, the active
2212                  * link.  There's no active qc on NCQ errors.  It will
2213                  * be determined by EH by reading log page 10h.
2214                  */
2215                 if (active_qc)
2216                         active_qc->err_mask |= AC_ERR_DEV;
2217                 else
2218                         active_ehi->err_mask |= AC_ERR_DEV;
2219
2220                 if (hpriv->flags & AHCI_HFLAG_IGN_SERR_INTERNAL)
2221                         host_ehi->serror &= ~SERR_INTERNAL;
2222         }
2223
2224         if (irq_stat & PORT_IRQ_UNK_FIS) {
2225                 u32 *unk = (u32 *)(pp->rx_fis + RX_FIS_UNK);
2226
2227                 active_ehi->err_mask |= AC_ERR_HSM;
2228                 active_ehi->action |= ATA_EH_RESET;
2229                 ata_ehi_push_desc(active_ehi,
2230                                   "unknown FIS %08x %08x %08x %08x" ,
2231                                   unk[0], unk[1], unk[2], unk[3]);
2232         }
2233
2234         if (sata_pmp_attached(ap) && (irq_stat & PORT_IRQ_BAD_PMP)) {
2235                 active_ehi->err_mask |= AC_ERR_HSM;
2236                 active_ehi->action |= ATA_EH_RESET;
2237                 ata_ehi_push_desc(active_ehi, "incorrect PMP");
2238         }
2239
2240         if (irq_stat & (PORT_IRQ_HBUS_ERR | PORT_IRQ_HBUS_DATA_ERR)) {
2241                 host_ehi->err_mask |= AC_ERR_HOST_BUS;
2242                 host_ehi->action |= ATA_EH_RESET;
2243                 ata_ehi_push_desc(host_ehi, "host bus error");
2244         }
2245
2246         if (irq_stat & PORT_IRQ_IF_ERR) {
2247                 if (fbs_need_dec)
2248                         active_ehi->err_mask |= AC_ERR_DEV;
2249                 else {
2250                         host_ehi->err_mask |= AC_ERR_ATA_BUS;
2251                         host_ehi->action |= ATA_EH_RESET;
2252                 }
2253
2254                 ata_ehi_push_desc(host_ehi, "interface fatal error");
2255         }
2256
2257         if (irq_stat & (PORT_IRQ_CONNECT | PORT_IRQ_PHYRDY)) {
2258                 ata_ehi_hotplugged(host_ehi);
2259                 ata_ehi_push_desc(host_ehi, "%s",
2260                         irq_stat & PORT_IRQ_CONNECT ?
2261                         "connection status changed" : "PHY RDY changed");
2262         }
2263
2264         /* okay, let's hand over to EH */
2265
2266         if (irq_stat & PORT_IRQ_FREEZE)
2267                 ata_port_freeze(ap);
2268         else if (fbs_need_dec) {
2269                 ata_link_abort(link);
2270                 ahci_fbs_dec_intr(ap);
2271         } else
2272                 ata_port_abort(ap);
2273 }
2274
2275 static void ahci_port_intr(struct ata_port *ap)
2276 {
2277         void __iomem *port_mmio = ahci_port_base(ap);
2278         struct ata_eh_info *ehi = &ap->link.eh_info;
2279         struct ahci_port_priv *pp = ap->private_data;
2280         struct ahci_host_priv *hpriv = ap->host->private_data;
2281         int resetting = !!(ap->pflags & ATA_PFLAG_RESETTING);
2282         u32 status, qc_active = 0;
2283         int rc;
2284
2285         status = readl(port_mmio + PORT_IRQ_STAT);
2286         writel(status, port_mmio + PORT_IRQ_STAT);
2287
2288         /* ignore BAD_PMP while resetting */
2289         if (unlikely(resetting))
2290                 status &= ~PORT_IRQ_BAD_PMP;
2291
2292         /* If we are getting PhyRdy, this is
2293          * just a power state change, we should
2294          * clear out this, plus the PhyRdy/Comm
2295          * Wake bits from Serror
2296          */
2297         if ((hpriv->flags & AHCI_HFLAG_NO_HOTPLUG) &&
2298                 (status & PORT_IRQ_PHYRDY)) {
2299                 status &= ~PORT_IRQ_PHYRDY;
2300                 ahci_scr_write(&ap->link, SCR_ERROR, ((1 << 16) | (1 << 18)));
2301         }
2302
2303         if (unlikely(status & PORT_IRQ_ERROR)) {
2304                 ahci_error_intr(ap, status);
2305                 return;
2306         }
2307
2308         if (status & PORT_IRQ_SDB_FIS) {
2309                 /* If SNotification is available, leave notification
2310                  * handling to sata_async_notification().  If not,
2311                  * emulate it by snooping SDB FIS RX area.
2312                  *
2313                  * Snooping FIS RX area is probably cheaper than
2314                  * poking SNotification but some constrollers which
2315                  * implement SNotification, ICH9 for example, don't
2316                  * store AN SDB FIS into receive area.
2317                  */
2318                 if (hpriv->cap & HOST_CAP_SNTF)
2319                         sata_async_notification(ap);
2320                 else {
2321                         /* If the 'N' bit in word 0 of the FIS is set,
2322                          * we just received asynchronous notification.
2323                          * Tell libata about it.
2324                          *
2325                          * Lack of SNotification should not appear in
2326                          * ahci 1.2, so the workaround is unnecessary
2327                          * when FBS is enabled.
2328                          */
2329                         if (pp->fbs_enabled)
2330                                 WARN_ON_ONCE(1);
2331                         else {
2332                                 const __le32 *f = pp->rx_fis + RX_FIS_SDB;
2333                                 u32 f0 = le32_to_cpu(f[0]);
2334                                 if (f0 & (1 << 15))
2335                                         sata_async_notification(ap);
2336                         }
2337                 }
2338         }
2339
2340         /* pp->active_link is not reliable once FBS is enabled, both
2341          * PORT_SCR_ACT and PORT_CMD_ISSUE should be checked because
2342          * NCQ and non-NCQ commands may be in flight at the same time.
2343          */
2344         if (pp->fbs_enabled) {
2345                 if (ap->qc_active) {
2346                         qc_active = readl(port_mmio + PORT_SCR_ACT);
2347                         qc_active |= readl(port_mmio + PORT_CMD_ISSUE);
2348                 }
2349         } else {
2350                 /* pp->active_link is valid iff any command is in flight */
2351                 if (ap->qc_active && pp->active_link->sactive)
2352                         qc_active = readl(port_mmio + PORT_SCR_ACT);
2353                 else
2354                         qc_active = readl(port_mmio + PORT_CMD_ISSUE);
2355         }
2356
2357         rc = ata_qc_complete_multiple(ap, qc_active);
2358
2359         /* while resetting, invalid completions are expected */
2360         if (unlikely(rc < 0 && !resetting)) {
2361                 ehi->err_mask |= AC_ERR_HSM;
2362                 ehi->action |= ATA_EH_RESET;
2363                 ata_port_freeze(ap);
2364         }
2365 }
2366
2367 static irqreturn_t ahci_interrupt(int irq, void *dev_instance)
2368 {
2369         struct ata_host *host = dev_instance;
2370         struct ahci_host_priv *hpriv;
2371         unsigned int i, handled = 0;
2372         void __iomem *mmio;
2373         u32 irq_stat, irq_masked;
2374
2375         VPRINTK("ENTER\n");
2376
2377         hpriv = host->private_data;
2378         mmio = host->iomap[AHCI_PCI_BAR];
2379
2380         /* sigh.  0xffffffff is a valid return from h/w */
2381         irq_stat = readl(mmio + HOST_IRQ_STAT);
2382         if (!irq_stat)
2383                 return IRQ_NONE;
2384
2385         irq_masked = irq_stat & hpriv->port_map;
2386
2387         spin_lock(&host->lock);
2388
2389         for (i = 0; i < host->n_ports; i++) {
2390                 struct ata_port *ap;
2391
2392                 if (!(irq_masked & (1 << i)))
2393                         continue;
2394
2395                 ap = host->ports[i];
2396                 if (ap) {
2397                         ahci_port_intr(ap);
2398                         VPRINTK("port %u\n", i);
2399                 } else {
2400                         VPRINTK("port %u (no irq)\n", i);
2401                         if (ata_ratelimit())
2402                                 dev_printk(KERN_WARNING, host->dev,
2403                                         "interrupt on disabled port %u\n", i);
2404                 }
2405
2406                 handled = 1;
2407         }
2408
2409         /* HOST_IRQ_STAT behaves as level triggered latch meaning that
2410          * it should be cleared after all the port events are cleared;
2411          * otherwise, it will raise a spurious interrupt after each
2412          * valid one.  Please read section 10.6.2 of ahci 1.1 for more
2413          * information.
2414          *
2415          * Also, use the unmasked value to clear interrupt as spurious
2416          * pending event on a dummy port might cause screaming IRQ.
2417          */
2418         writel(irq_stat, mmio + HOST_IRQ_STAT);
2419
2420         spin_unlock(&host->lock);
2421
2422         VPRINTK("EXIT\n");
2423
2424         return IRQ_RETVAL(handled);
2425 }
2426
2427 static unsigned int ahci_qc_issue(struct ata_queued_cmd *qc)
2428 {
2429         struct ata_port *ap = qc->ap;
2430         void __iomem *port_mmio = ahci_port_base(ap);
2431         struct ahci_port_priv *pp = ap->private_data;
2432
2433         /* Keep track of the currently active link.  It will be used
2434          * in completion path to determine whether NCQ phase is in
2435          * progress.
2436          */
2437         pp->active_link = qc->dev->link;
2438
2439         if (qc->tf.protocol == ATA_PROT_NCQ)
2440                 writel(1 << qc->tag, port_mmio + PORT_SCR_ACT);
2441
2442         if (pp->fbs_enabled && pp->fbs_last_dev != qc->dev->link->pmp) {
2443                 u32 fbs = readl(port_mmio + PORT_FBS);
2444                 fbs &= ~(PORT_FBS_DEV_MASK | PORT_FBS_DEC);
2445                 fbs |= qc->dev->link->pmp << PORT_FBS_DEV_OFFSET;
2446                 writel(fbs, port_mmio + PORT_FBS);
2447                 pp->fbs_last_dev = qc->dev->link->pmp;
2448         }
2449
2450         writel(1 << qc->tag, port_mmio + PORT_CMD_ISSUE);
2451
2452         ahci_sw_activity(qc->dev->link);
2453
2454         return 0;
2455 }
2456
2457 static bool ahci_qc_fill_rtf(struct ata_queued_cmd *qc)
2458 {
2459         struct ahci_port_priv *pp = qc->ap->private_data;
2460         u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG;
2461
2462         if (pp->fbs_enabled)
2463                 d2h_fis += qc->dev->link->pmp * AHCI_RX_FIS_SZ;
2464
2465         ata_tf_from_fis(d2h_fis, &qc->result_tf);
2466         return true;
2467 }
2468
2469 static void ahci_freeze(struct ata_port *ap)
2470 {
2471         void __iomem *port_mmio = ahci_port_base(ap);
2472
2473         /* turn IRQ off */
2474         writel(0, port_mmio + PORT_IRQ_MASK);
2475 }
2476
2477 static void ahci_thaw(struct ata_port *ap)
2478 {
2479         void __iomem *mmio = ap->host->iomap[AHCI_PCI_BAR];
2480         void __iomem *port_mmio = ahci_port_base(ap);
2481         u32 tmp;
2482         struct ahci_port_priv *pp = ap->private_data;
2483
2484         /* clear IRQ */
2485         tmp = readl(port_mmio + PORT_IRQ_STAT);
2486         writel(tmp, port_mmio + PORT_IRQ_STAT);
2487         writel(1 << ap->port_no, mmio + HOST_IRQ_STAT);
2488
2489         /* turn IRQ back on */
2490         writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK);
2491 }
2492
2493 static void ahci_error_handler(struct ata_port *ap)
2494 {
2495         if (!(ap->pflags & ATA_PFLAG_FROZEN)) {
2496                 /* restart engine */
2497                 ahci_stop_engine(ap);
2498                 ahci_start_engine(ap);
2499         }
2500
2501         sata_pmp_error_handler(ap);
2502 }
2503
2504 static void ahci_post_internal_cmd(struct ata_queued_cmd *qc)
2505 {
2506         struct ata_port *ap = qc->ap;
2507
2508         /* make DMA engine forget about the failed command */
2509         if (qc->flags & ATA_QCFLAG_FAILED)
2510                 ahci_kick_engine(ap);
2511 }
2512
2513 static void ahci_enable_fbs(struct ata_port *ap)
2514 {
2515         struct ahci_port_priv *pp = ap->private_data;
2516         void __iomem *port_mmio = ahci_port_base(ap);
2517         u32 fbs;
2518         int rc;
2519
2520         if (!pp->fbs_supported)
2521                 return;
2522
2523         fbs = readl(port_mmio + PORT_FBS);
2524         if (fbs & PORT_FBS_EN) {
2525                 pp->fbs_enabled = true;
2526                 pp->fbs_last_dev = -1; /* initialization */
2527                 return;
2528         }
2529
2530         rc = ahci_stop_engine(ap);
2531         if (rc)
2532                 return;
2533
2534         writel(fbs | PORT_FBS_EN, port_mmio + PORT_FBS);
2535         fbs = readl(port_mmio + PORT_FBS);
2536         if (fbs & PORT_FBS_EN) {
2537                 dev_printk(KERN_INFO, ap->host->dev, "FBS is enabled.\n");
2538                 pp->fbs_enabled = true;
2539                 pp->fbs_last_dev = -1; /* initialization */
2540         } else
2541                 dev_printk(KERN_ERR, ap->host->dev, "Failed to enable FBS\n");
2542
2543         ahci_start_engine(ap);
2544 }
2545
2546 static void ahci_disable_fbs(struct ata_port *ap)
2547 {
2548         struct ahci_port_priv *pp = ap->private_data;
2549         void __iomem *port_mmio = ahci_port_base(ap);
2550         u32 fbs;
2551         int rc;
2552
2553         if (!pp->fbs_supported)
2554                 return;
2555
2556         fbs = readl(port_mmio + PORT_FBS);
2557         if ((fbs & PORT_FBS_EN) == 0) {
2558                 pp->fbs_enabled = false;
2559                 return;
2560         }
2561
2562         rc = ahci_stop_engine(ap);
2563         if (rc)
2564                 return;
2565
2566         writel(fbs & ~PORT_FBS_EN, port_mmio + PORT_FBS);
2567         fbs = readl(port_mmio + PORT_FBS);
2568         if (fbs & PORT_FBS_EN)
2569                 dev_printk(KERN_ERR, ap->host->dev, "Failed to disable FBS\n");
2570         else {
2571                 dev_printk(KERN_INFO, ap->host->dev, "FBS is disabled.\n");
2572                 pp->fbs_enabled = false;
2573         }
2574
2575         ahci_start_engine(ap);
2576 }
2577
2578 static void ahci_pmp_attach(struct ata_port *ap)
2579 {
2580         void __iomem *port_mmio = ahci_port_base(ap);
2581         struct ahci_port_priv *pp = ap->private_data;
2582         u32 cmd;
2583
2584         cmd = readl(port_mmio + PORT_CMD);
2585         cmd |= PORT_CMD_PMP;
2586         writel(cmd, port_mmio + PORT_CMD);
2587
2588         ahci_enable_fbs(ap);
2589
2590         pp->intr_mask |= PORT_IRQ_BAD_PMP;
2591         writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK);
2592 }
2593
2594 static void ahci_pmp_detach(struct ata_port *ap)
2595 {
2596         void __iomem *port_mmio = ahci_port_base(ap);
2597         struct ahci_port_priv *pp = ap->private_data;
2598         u32 cmd;
2599
2600         ahci_disable_fbs(ap);
2601
2602         cmd = readl(port_mmio + PORT_CMD);
2603         cmd &= ~PORT_CMD_PMP;
2604         writel(cmd, port_mmio + PORT_CMD);
2605
2606         pp->intr_mask &= ~PORT_IRQ_BAD_PMP;
2607         writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK);
2608 }
2609
2610 static int ahci_port_resume(struct ata_port *ap)
2611 {
2612         ahci_power_up(ap);
2613         ahci_start_port(ap);
2614
2615         if (sata_pmp_attached(ap))
2616                 ahci_pmp_attach(ap);
2617         else
2618                 ahci_pmp_detach(ap);
2619
2620         return 0;
2621 }
2622
2623 #ifdef CONFIG_PM
2624 static int ahci_port_suspend(struct ata_port *ap, pm_message_t mesg)
2625 {
2626         const char *emsg = NULL;
2627         int rc;
2628
2629         rc = ahci_deinit_port(ap, &emsg);
2630         if (rc == 0)
2631                 ahci_power_down(ap);
2632         else {
2633                 ata_port_printk(ap, KERN_ERR, "%s (%d)\n", emsg, rc);
2634                 ahci_start_port(ap);
2635         }
2636
2637         return rc;
2638 }
2639
2640 static int ahci_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg)
2641 {
2642         struct ata_host *host = dev_get_drvdata(&pdev->dev);
2643         struct ahci_host_priv *hpriv = host->private_data;
2644         void __iomem *mmio = host->iomap[AHCI_PCI_BAR];
2645         u32 ctl;
2646
2647         if (mesg.event & PM_EVENT_SUSPEND &&
2648             hpriv->flags & AHCI_HFLAG_NO_SUSPEND) {
2649                 dev_printk(KERN_ERR, &pdev->dev,
2650                            "BIOS update required for suspend/resume\n");
2651                 return -EIO;
2652         }
2653
2654         if (mesg.event & PM_EVENT_SLEEP) {
2655                 /* AHCI spec rev1.1 section 8.3.3:
2656                  * Software must disable interrupts prior to requesting a
2657                  * transition of the HBA to D3 state.
2658                  */
2659                 ctl = readl(mmio + HOST_CTL);
2660                 ctl &= ~HOST_IRQ_EN;
2661                 writel(ctl, mmio + HOST_CTL);
2662                 readl(mmio + HOST_CTL); /* flush */
2663         }
2664
2665         return ata_pci_device_suspend(pdev, mesg);
2666 }
2667
2668 static int ahci_pci_device_resume(struct pci_dev *pdev)
2669 {
2670         struct ata_host *host = dev_get_drvdata(&pdev->dev);
2671         int rc;
2672
2673         rc = ata_pci_device_do_resume(pdev);
2674         if (rc)
2675                 return rc;
2676
2677         if (pdev->dev.power.power_state.event == PM_EVENT_SUSPEND) {
2678                 rc = ahci_reset_controller(host);
2679                 if (rc)
2680                         return rc;
2681
2682                 ahci_init_controller(host);
2683         }
2684
2685         ata_host_resume(host);
2686
2687         return 0;
2688 }
2689 #endif
2690
2691 static int ahci_port_start(struct ata_port *ap)
2692 {
2693         struct ahci_host_priv *hpriv = ap->host->private_data;
2694         struct device *dev = ap->host->dev;
2695         struct ahci_port_priv *pp;
2696         void *mem;
2697         dma_addr_t mem_dma;
2698         size_t dma_sz, rx_fis_sz;
2699
2700         pp = devm_kzalloc(dev, sizeof(*pp), GFP_KERNEL);
2701         if (!pp)
2702                 return -ENOMEM;
2703
2704         /* check FBS capability */
2705         if ((hpriv->cap & HOST_CAP_FBS) && sata_pmp_supported(ap)) {
2706                 void __iomem *port_mmio = ahci_port_base(ap);
2707                 u32 cmd = readl(port_mmio + PORT_CMD);
2708                 if (cmd & PORT_CMD_FBSCP)
2709                         pp->fbs_supported = true;
2710                 else
2711                         dev_printk(KERN_WARNING, dev,
2712                                    "The port is not capable of FBS\n");
2713         }
2714
2715         if (pp->fbs_supported) {
2716                 dma_sz = AHCI_PORT_PRIV_FBS_DMA_SZ;
2717                 rx_fis_sz = AHCI_RX_FIS_SZ * 16;
2718         } else {
2719                 dma_sz = AHCI_PORT_PRIV_DMA_SZ;
2720                 rx_fis_sz = AHCI_RX_FIS_SZ;
2721         }
2722
2723         mem = dmam_alloc_coherent(dev, dma_sz, &mem_dma, GFP_KERNEL);
2724         if (!mem)
2725                 return -ENOMEM;
2726         memset(mem, 0, dma_sz);
2727
2728         /*
2729          * First item in chunk of DMA memory: 32-slot command table,
2730          * 32 bytes each in size
2731          */
2732         pp->cmd_slot = mem;
2733         pp->cmd_slot_dma = mem_dma;
2734
2735         mem += AHCI_CMD_SLOT_SZ;
2736         mem_dma += AHCI_CMD_SLOT_SZ;
2737
2738         /*
2739          * Second item: Received-FIS area
2740          */
2741         pp->rx_fis = mem;
2742         pp->rx_fis_dma = mem_dma;
2743
2744         mem += rx_fis_sz;
2745         mem_dma += rx_fis_sz;
2746
2747         /*
2748          * Third item: data area for storing a single command
2749          * and its scatter-gather table
2750          */
2751         pp->cmd_tbl = mem;
2752         pp->cmd_tbl_dma = mem_dma;
2753
2754         /*
2755          * Save off initial list of interrupts to be enabled.
2756          * This could be changed later
2757          */
2758         pp->intr_mask = DEF_PORT_IRQ;
2759
2760         ap->private_data = pp;
2761
2762         /* engage engines, captain */
2763         return ahci_port_resume(ap);
2764 }
2765
2766 static void ahci_port_stop(struct ata_port *ap)
2767 {
2768         const char *emsg = NULL;
2769         int rc;
2770
2771         /* de-initialize port */
2772         rc = ahci_deinit_port(ap, &emsg);
2773         if (rc)
2774                 ata_port_printk(ap, KERN_WARNING, "%s (%d)\n", emsg, rc);
2775 }
2776
2777 static int ahci_configure_dma_masks(struct pci_dev *pdev, int using_dac)
2778 {
2779         int rc;
2780
2781         if (using_dac &&
2782             !pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) {
2783                 rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64));
2784                 if (rc) {
2785                         rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
2786                         if (rc) {
2787                                 dev_printk(KERN_ERR, &pdev->dev,
2788                                            "64-bit DMA enable failed\n");
2789                                 return rc;
2790                         }
2791                 }
2792         } else {
2793                 rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
2794                 if (rc) {
2795                         dev_printk(KERN_ERR, &pdev->dev,
2796                                    "32-bit DMA enable failed\n");
2797                         return rc;
2798                 }
2799                 rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
2800                 if (rc) {
2801                         dev_printk(KERN_ERR, &pdev->dev,
2802                                    "32-bit consistent DMA enable failed\n");
2803                         return rc;
2804                 }
2805         }
2806         return 0;
2807 }
2808
2809 static void ahci_print_info(struct ata_host *host)
2810 {
2811         struct ahci_host_priv *hpriv = host->private_data;
2812         struct pci_dev *pdev = to_pci_dev(host->dev);
2813         void __iomem *mmio = host->iomap[AHCI_PCI_BAR];
2814         u32 vers, cap, cap2, impl, speed;
2815         const char *speed_s;
2816         u16 cc;
2817         const char *scc_s;
2818
2819         vers = readl(mmio + HOST_VERSION);
2820         cap = hpriv->cap;
2821         cap2 = hpriv->cap2;
2822         impl = hpriv->port_map;
2823
2824         speed = (cap >> 20) & 0xf;
2825         if (speed == 1)
2826                 speed_s = "1.5";
2827         else if (speed == 2)
2828                 speed_s = "3";
2829         else if (speed == 3)
2830                 speed_s = "6";
2831         else
2832                 speed_s = "?";
2833
2834         pci_read_config_word(pdev, 0x0a, &cc);
2835         if (cc == PCI_CLASS_STORAGE_IDE)
2836                 scc_s = "IDE";
2837         else if (cc == PCI_CLASS_STORAGE_SATA)
2838                 scc_s = "SATA";
2839         else if (cc == PCI_CLASS_STORAGE_RAID)
2840                 scc_s = "RAID";
2841         else
2842                 scc_s = "unknown";
2843
2844         dev_printk(KERN_INFO, &pdev->dev,
2845                 "AHCI %02x%02x.%02x%02x "
2846                 "%u slots %u ports %s Gbps 0x%x impl %s mode\n"
2847                 ,
2848
2849                 (vers >> 24) & 0xff,
2850                 (vers >> 16) & 0xff,
2851                 (vers >> 8) & 0xff,
2852                 vers & 0xff,
2853
2854                 ((cap >> 8) & 0x1f) + 1,
2855                 (cap & 0x1f) + 1,
2856                 speed_s,
2857                 impl,
2858                 scc_s);
2859
2860         dev_printk(KERN_INFO, &pdev->dev,
2861                 "flags: "
2862                 "%s%s%s%s%s%s%s"
2863                 "%s%s%s%s%s%s%s"
2864                 "%s%s%s%s%s%s\n"
2865                 ,
2866
2867                 cap & HOST_CAP_64 ? "64bit " : "",
2868                 cap & HOST_CAP_NCQ ? "ncq " : "",
2869                 cap & HOST_CAP_SNTF ? "sntf " : "",
2870                 cap & HOST_CAP_MPS ? "ilck " : "",
2871                 cap & HOST_CAP_SSS ? "stag " : "",
2872                 cap & HOST_CAP_ALPM ? "pm " : "",
2873                 cap & HOST_CAP_LED ? "led " : "",
2874                 cap & HOST_CAP_CLO ? "clo " : "",
2875                 cap & HOST_CAP_ONLY ? "only " : "",
2876                 cap & HOST_CAP_PMP ? "pmp " : "",
2877                 cap & HOST_CAP_FBS ? "fbs " : "",
2878                 cap & HOST_CAP_PIO_MULTI ? "pio " : "",
2879                 cap & HOST_CAP_SSC ? "slum " : "",
2880                 cap & HOST_CAP_PART ? "part " : "",
2881                 cap & HOST_CAP_CCC ? "ccc " : "",
2882                 cap & HOST_CAP_EMS ? "ems " : "",
2883                 cap & HOST_CAP_SXS ? "sxs " : "",
2884                 cap2 & HOST_CAP2_APST ? "apst " : "",
2885                 cap2 & HOST_CAP2_NVMHCI ? "nvmp " : "",
2886                 cap2 & HOST_CAP2_BOH ? "boh " : ""
2887                 );
2888 }
2889
2890 /* On ASUS P5W DH Deluxe, the second port of PCI device 00:1f.2 is
2891  * hardwired to on-board SIMG 4726.  The chipset is ICH8 and doesn't
2892  * support PMP and the 4726 either directly exports the device
2893  * attached to the first downstream port or acts as a hardware storage
2894  * controller and emulate a single ATA device (can be RAID 0/1 or some
2895  * other configuration).
2896  *
2897  * When there's no device attached to the first downstream port of the
2898  * 4726, "Config Disk" appears, which is a pseudo ATA device to
2899  * configure the 4726.  However, ATA emulation of the device is very
2900  * lame.  It doesn't send signature D2H Reg FIS after the initial
2901  * hardreset, pukes on SRST w/ PMP==0 and has bunch of other issues.
2902  *
2903  * The following function works around the problem by always using
2904  * hardreset on the port and not depending on receiving signature FIS
2905  * afterward.  If signature FIS isn't received soon, ATA class is
2906  * assumed without follow-up softreset.
2907  */
2908 static void ahci_p5wdh_workaround(struct ata_host *host)
2909 {
2910         static struct dmi_system_id sysids[] = {
2911                 {
2912                         .ident = "P5W DH Deluxe",
2913                         .matches = {
2914                                 DMI_MATCH(DMI_SYS_VENDOR,
2915                                           "ASUSTEK COMPUTER INC"),
2916                                 DMI_MATCH(DMI_PRODUCT_NAME, "P5W DH Deluxe"),
2917                         },
2918                 },
2919                 { }
2920         };
2921         struct pci_dev *pdev = to_pci_dev(host->dev);
2922
2923         if (pdev->bus->number == 0 && pdev->devfn == PCI_DEVFN(0x1f, 2) &&
2924             dmi_check_system(sysids)) {
2925                 struct ata_port *ap = host->ports[1];
2926
2927                 dev_printk(KERN_INFO, &pdev->dev, "enabling ASUS P5W DH "
2928                            "Deluxe on-board SIMG4726 workaround\n");
2929
2930                 ap->ops = &ahci_p5wdh_ops;
2931                 ap->link.flags |= ATA_LFLAG_NO_SRST | ATA_LFLAG_ASSUME_ATA;
2932         }
2933 }
2934
2935 /* only some SB600 ahci controllers can do 64bit DMA */
2936 static bool ahci_sb600_enable_64bit(struct pci_dev *pdev)
2937 {
2938         static const struct dmi_system_id sysids[] = {
2939                 /*
2940                  * The oldest version known to be broken is 0901 and
2941                  * working is 1501 which was released on 2007-10-26.
2942                  * Enable 64bit DMA on 1501 and anything newer.
2943                  *
2944                  * Please read bko#9412 for more info.
2945                  */
2946                 {
2947                         .ident = "ASUS M2A-VM",
2948                         .matches = {
2949                                 DMI_MATCH(DMI_BOARD_VENDOR,
2950                                           "ASUSTeK Computer INC."),
2951                                 DMI_MATCH(DMI_BOARD_NAME, "M2A-VM"),
2952                         },
2953                         .driver_data = "20071026",      /* yyyymmdd */
2954                 },
2955                 /*
2956                  * All BIOS versions for the MSI K9A2 Platinum (MS-7376)
2957                  * support 64bit DMA.
2958                  *
2959                  * BIOS versions earlier than 1.5 had the Manufacturer DMI
2960                  * fields as "MICRO-STAR INTERANTIONAL CO.,LTD".
2961                  * This spelling mistake was fixed in BIOS version 1.5, so
2962                  * 1.5 and later have the Manufacturer as
2963                  * "MICRO-STAR INTERNATIONAL CO.,LTD".
2964                  * So try to match on DMI_BOARD_VENDOR of "MICRO-STAR INTER".
2965                  *
2966                  * BIOS versions earlier than 1.9 had a Board Product Name
2967                  * DMI field of "MS-7376". This was changed to be
2968                  * "K9A2 Platinum (MS-7376)" in version 1.9, but we can still
2969                  * match on DMI_BOARD_NAME of "MS-7376".
2970                  */
2971                 {
2972                         .ident = "MSI K9A2 Platinum",
2973                         .matches = {
2974                                 DMI_MATCH(DMI_BOARD_VENDOR,
2975                                           "MICRO-STAR INTER"),
2976                                 DMI_MATCH(DMI_BOARD_NAME, "MS-7376"),
2977                         },
2978                 },
2979                 { }
2980         };
2981         const struct dmi_system_id *match;
2982         int year, month, date;
2983         char buf[9];
2984
2985         match = dmi_first_match(sysids);
2986         if (pdev->bus->number != 0 || pdev->devfn != PCI_DEVFN(0x12, 0) ||
2987             !match)
2988                 return false;
2989
2990         if (!match->driver_data)
2991                 goto enable_64bit;
2992
2993         dmi_get_date(DMI_BIOS_DATE, &year, &month, &date);
2994         snprintf(buf, sizeof(buf), "%04d%02d%02d", year, month, date);
2995
2996         if (strcmp(buf, match->driver_data) >= 0)
2997                 goto enable_64bit;
2998         else {
2999                 dev_printk(KERN_WARNING, &pdev->dev, "%s: BIOS too old, "
3000                            "forcing 32bit DMA, update BIOS\n", match->ident);
3001                 return false;
3002         }
3003
3004 enable_64bit:
3005         dev_printk(KERN_WARNING, &pdev->dev, "%s: enabling 64bit DMA\n",
3006                    match->ident);
3007         return true;
3008 }
3009
3010 static bool ahci_broken_system_poweroff(struct pci_dev *pdev)
3011 {
3012         static const struct dmi_system_id broken_systems[] = {
3013                 {
3014                         .ident = "HP Compaq nx6310",
3015                         .matches = {
3016                                 DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
3017                                 DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq nx6310"),
3018                         },
3019                         /* PCI slot number of the controller */
3020                         .driver_data = (void *)0x1FUL,
3021                 },
3022                 {
3023                         .ident = "HP Compaq 6720s",
3024                         .matches = {
3025                                 DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
3026                                 DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq 6720s"),
3027                         },
3028                         /* PCI slot number of the controller */
3029                         .driver_data = (void *)0x1FUL,
3030                 },
3031
3032                 { }     /* terminate list */
3033         };
3034         const struct dmi_system_id *dmi = dmi_first_match(broken_systems);
3035
3036         if (dmi) {
3037                 unsigned long slot = (unsigned long)dmi->driver_data;
3038                 /* apply the quirk only to on-board controllers */
3039                 return slot == PCI_SLOT(pdev->devfn);
3040         }
3041
3042         return false;
3043 }
3044
3045 static bool ahci_broken_suspend(struct pci_dev *pdev)
3046 {
3047         static const struct dmi_system_id sysids[] = {
3048                 /*
3049                  * On HP dv[4-6] and HDX18 with earlier BIOSen, link
3050                  * to the harddisk doesn't become online after
3051                  * resuming from STR.  Warn and fail suspend.
3052                  *
3053                  * http://bugzilla.kernel.org/show_bug.cgi?id=12276
3054                  *
3055                  * Use dates instead of versions to match as HP is
3056                  * apparently recycling both product and version
3057                  * strings.
3058                  *
3059                  * http://bugzilla.kernel.org/show_bug.cgi?id=15462
3060                  */
3061                 {
3062                         .ident = "dv4",
3063                         .matches = {
3064                                 DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
3065                                 DMI_MATCH(DMI_PRODUCT_NAME,
3066                                           "HP Pavilion dv4 Notebook PC"),
3067                         },
3068                         .driver_data = "20090105",      /* F.30 */
3069                 },
3070                 {
3071                         .ident = "dv5",
3072                         .matches = {
3073                                 DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
3074                                 DMI_MATCH(DMI_PRODUCT_NAME,
3075                                           "HP Pavilion dv5 Notebook PC"),
3076                         },
3077                         .driver_data = "20090506",      /* F.16 */
3078                 },
3079                 {
3080                         .ident = "dv6",
3081                         .matches = {
3082                                 DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
3083                                 DMI_MATCH(DMI_PRODUCT_NAME,
3084                                           "HP Pavilion dv6 Notebook PC"),
3085                         },
3086                         .driver_data = "20090423",      /* F.21 */
3087                 },
3088                 {
3089                         .ident = "HDX18",
3090                         .matches = {
3091                                 DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
3092                                 DMI_MATCH(DMI_PRODUCT_NAME,
3093                                           "HP HDX18 Notebook PC"),
3094                         },
3095                         .driver_data = "20090430",      /* F.23 */
3096                 },
3097                 /*
3098                  * Acer eMachines G725 has the same problem.  BIOS
3099                  * V1.03 is known to be broken.  V3.04 is known to
3100                  * work.  Inbetween, there are V1.06, V2.06 and V3.03
3101                  * that we don't have much idea about.  For now,
3102                  * blacklist anything older than V3.04.
3103                  *
3104                  * http://bugzilla.kernel.org/show_bug.cgi?id=15104
3105                  */
3106                 {
3107                         .ident = "G725",
3108                         .matches = {
3109                                 DMI_MATCH(DMI_SYS_VENDOR, "eMachines"),
3110                                 DMI_MATCH(DMI_PRODUCT_NAME, "eMachines G725"),
3111                         },
3112                         .driver_data = "20091216",      /* V3.04 */
3113                 },
3114                 { }     /* terminate list */
3115         };
3116         const struct dmi_system_id *dmi = dmi_first_match(sysids);
3117         int year, month, date;
3118         char buf[9];
3119
3120         if (!dmi || pdev->bus->number || pdev->devfn != PCI_DEVFN(0x1f, 2))
3121                 return false;
3122
3123         dmi_get_date(DMI_BIOS_DATE, &year, &month, &date);
3124         snprintf(buf, sizeof(buf), "%04d%02d%02d", year, month, date);
3125
3126         return strcmp(buf, dmi->driver_data) < 0;
3127 }
3128
3129 static bool ahci_broken_online(struct pci_dev *pdev)
3130 {
3131 #define ENCODE_BUSDEVFN(bus, slot, func)                        \
3132         (void *)(unsigned long)(((bus) << 8) | PCI_DEVFN((slot), (func)))
3133         static const struct dmi_system_id sysids[] = {
3134                 /*
3135                  * There are several gigabyte boards which use
3136                  * SIMG5723s configured as hardware RAID.  Certain
3137                  * 5723 firmware revisions shipped there keep the link
3138                  * online but fail to answer properly to SRST or
3139                  * IDENTIFY when no device is attached downstream
3140                  * causing libata to retry quite a few times leading
3141                  * to excessive detection delay.
3142                  *
3143                  * As these firmwares respond to the second reset try
3144                  * with invalid device signature, considering unknown
3145                  * sig as offline works around the problem acceptably.
3146                  */
3147                 {
3148                         .ident = "EP45-DQ6",
3149                         .matches = {
3150                                 DMI_MATCH(DMI_BOARD_VENDOR,
3151                                           "Gigabyte Technology Co., Ltd."),
3152                                 DMI_MATCH(DMI_BOARD_NAME, "EP45-DQ6"),
3153                         },
3154                         .driver_data = ENCODE_BUSDEVFN(0x0a, 0x00, 0),
3155                 },
3156                 {
3157                         .ident = "EP45-DS5",
3158                         .matches = {
3159                                 DMI_MATCH(DMI_BOARD_VENDOR,
3160                                           "Gigabyte Technology Co., Ltd."),
3161                                 DMI_MATCH(DMI_BOARD_NAME, "EP45-DS5"),
3162                         },
3163                         .driver_data = ENCODE_BUSDEVFN(0x03, 0x00, 0),
3164                 },
3165                 { }     /* terminate list */
3166         };
3167 #undef ENCODE_BUSDEVFN
3168         const struct dmi_system_id *dmi = dmi_first_match(sysids);
3169         unsigned int val;
3170
3171         if (!dmi)
3172                 return false;
3173
3174         val = (unsigned long)dmi->driver_data;
3175
3176         return pdev->bus->number == (val >> 8) && pdev->devfn == (val & 0xff);
3177 }
3178
3179 #ifdef CONFIG_ATA_ACPI
3180 static void ahci_gtf_filter_workaround(struct ata_host *host)
3181 {
3182         static const struct dmi_system_id sysids[] = {
3183                 /*
3184                  * Aspire 3810T issues a bunch of SATA enable commands
3185                  * via _GTF including an invalid one and one which is
3186                  * rejected by the device.  Among the successful ones
3187                  * is FPDMA non-zero offset enable which when enabled
3188                  * only on the drive side leads to NCQ command
3189                  * failures.  Filter it out.
3190                  */
3191                 {
3192                         .ident = "Aspire 3810T",
3193                         .matches = {
3194                                 DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
3195                                 DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 3810T"),
3196                         },
3197                         .driver_data = (void *)ATA_ACPI_FILTER_FPDMA_OFFSET,
3198                 },
3199                 { }
3200         };
3201         const struct dmi_system_id *dmi = dmi_first_match(sysids);
3202         unsigned int filter;
3203         int i;
3204
3205         if (!dmi)
3206                 return;
3207
3208         filter = (unsigned long)dmi->driver_data;
3209         dev_printk(KERN_INFO, host->dev,
3210                    "applying extra ACPI _GTF filter 0x%x for %s\n",
3211                    filter, dmi->ident);
3212
3213         for (i = 0; i < host->n_ports; i++) {
3214                 struct ata_port *ap = host->ports[i];
3215                 struct ata_link *link;
3216                 struct ata_device *dev;
3217
3218                 ata_for_each_link(link, ap, EDGE)
3219                         ata_for_each_dev(dev, link, ALL)
3220                                 dev->gtf_filter |= filter;
3221         }
3222 }
3223 #else
3224 static inline void ahci_gtf_filter_workaround(struct ata_host *host)
3225 {}
3226 #endif
3227
3228 static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
3229 {
3230         static int printed_version;
3231         unsigned int board_id = ent->driver_data;
3232         struct ata_port_info pi = ahci_port_info[board_id];
3233         const struct ata_port_info *ppi[] = { &pi, NULL };
3234         struct device *dev = &pdev->dev;
3235         struct ahci_host_priv *hpriv;
3236         struct ata_host *host;
3237         int n_ports, i, rc;
3238
3239         VPRINTK("ENTER\n");
3240
3241         WARN_ON(ATA_MAX_QUEUE > AHCI_MAX_CMDS);
3242
3243         if (!printed_version++)
3244                 dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
3245
3246         /* The AHCI driver can only drive the SATA ports, the PATA driver
3247            can drive them all so if both drivers are selected make sure
3248            AHCI stays out of the way */
3249         if (pdev->vendor == PCI_VENDOR_ID_MARVELL && !marvell_enable)
3250                 return -ENODEV;
3251
3252         /* Promise's PDC42819 is a SAS/SATA controller that has an AHCI mode.
3253          * At the moment, we can only use the AHCI mode. Let the users know
3254          * that for SAS drives they're out of luck.
3255          */
3256         if (pdev->vendor == PCI_VENDOR_ID_PROMISE)
3257                 dev_printk(KERN_INFO, &pdev->dev, "PDC42819 "
3258                            "can only drive SATA devices with this driver\n");
3259
3260         /* acquire resources */
3261         rc = pcim_enable_device(pdev);
3262         if (rc)
3263                 return rc;
3264
3265         /* AHCI controllers often implement SFF compatible interface.
3266          * Grab all PCI BARs just in case.
3267          */
3268         rc = pcim_iomap_regions_request_all(pdev, 1 << AHCI_PCI_BAR, DRV_NAME);
3269         if (rc == -EBUSY)
3270                 pcim_pin_device(pdev);
3271         if (rc)
3272                 return rc;
3273
3274         if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
3275             (pdev->device == 0x2652 || pdev->device == 0x2653)) {
3276                 u8 map;
3277
3278                 /* ICH6s share the same PCI ID for both piix and ahci
3279                  * modes.  Enabling ahci mode while MAP indicates
3280                  * combined mode is a bad idea.  Yield to ata_piix.
3281                  */
3282                 pci_read_config_byte(pdev, ICH_MAP, &map);
3283                 if (map & 0x3) {
3284                         dev_printk(KERN_INFO, &pdev->dev, "controller is in "
3285                                    "combined mode, can't enable AHCI mode\n");
3286                         return -ENODEV;
3287                 }
3288         }
3289
3290         hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL);
3291         if (!hpriv)
3292                 return -ENOMEM;
3293         hpriv->flags |= (unsigned long)pi.private_data;
3294
3295         /* MCP65 revision A1 and A2 can't do MSI */
3296         if (board_id == board_ahci_mcp65 &&
3297             (pdev->revision == 0xa1 || pdev->revision == 0xa2))
3298                 hpriv->flags |= AHCI_HFLAG_NO_MSI;
3299
3300         /* SB800 does NOT need the workaround to ignore SERR_INTERNAL */
3301         if (board_id == board_ahci_sb700 && pdev->revision >= 0x40)
3302                 hpriv->flags &= ~AHCI_HFLAG_IGN_SERR_INTERNAL;
3303
3304         /* only some SB600s can do 64bit DMA */
3305         if (ahci_sb600_enable_64bit(pdev))
3306                 hpriv->flags &= ~AHCI_HFLAG_32BIT_ONLY;
3307
3308         if ((hpriv->flags & AHCI_HFLAG_NO_MSI) || pci_enable_msi(pdev))
3309                 pci_intx(pdev, 1);
3310
3311         /* save initial config */
3312         ahci_save_initial_config(pdev, hpriv);
3313
3314         /* prepare host */
3315         if (hpriv->cap & HOST_CAP_NCQ) {
3316                 pi.flags |= ATA_FLAG_NCQ;
3317                 /* Auto-activate optimization is supposed to be supported on
3318                    all AHCI controllers indicating NCQ support, but it seems
3319                    to be broken at least on some NVIDIA MCP79 chipsets.
3320                    Until we get info on which NVIDIA chipsets don't have this
3321                    issue, if any, disable AA on all NVIDIA AHCIs. */
3322                 if (pdev->vendor != PCI_VENDOR_ID_NVIDIA)
3323                         pi.flags |= ATA_FLAG_FPDMA_AA;
3324         }
3325
3326         if (hpriv->cap & HOST_CAP_PMP)
3327                 pi.flags |= ATA_FLAG_PMP;
3328
3329         if (ahci_em_messages && (hpriv->cap & HOST_CAP_EMS)) {
3330                 u8 messages;
3331                 void __iomem *mmio = pcim_iomap_table(pdev)[AHCI_PCI_BAR];
3332                 u32 em_loc = readl(mmio + HOST_EM_LOC);
3333                 u32 em_ctl = readl(mmio + HOST_EM_CTL);
3334
3335                 messages = (em_ctl & EM_CTRL_MSG_TYPE) >> 16;
3336
3337                 /* we only support LED message type right now */
3338                 if ((messages & 0x01) && (ahci_em_messages == 1)) {
3339                         /* store em_loc */
3340                         hpriv->em_loc = ((em_loc >> 16) * 4);
3341                         pi.flags |= ATA_FLAG_EM;
3342                         if (!(em_ctl & EM_CTL_ALHD))
3343                                 pi.flags |= ATA_FLAG_SW_ACTIVITY;
3344                 }
3345         }
3346
3347         if (ahci_broken_system_poweroff(pdev)) {
3348                 pi.flags |= ATA_FLAG_NO_POWEROFF_SPINDOWN;
3349                 dev_info(&pdev->dev,
3350                         "quirky BIOS, skipping spindown on poweroff\n");
3351         }
3352
3353         if (ahci_broken_suspend(pdev)) {
3354                 hpriv->flags |= AHCI_HFLAG_NO_SUSPEND;
3355                 dev_printk(KERN_WARNING, &pdev->dev,
3356                            "BIOS update required for suspend/resume\n");
3357         }
3358
3359         if (ahci_broken_online(pdev)) {
3360                 hpriv->flags |= AHCI_HFLAG_SRST_TOUT_IS_OFFLINE;
3361                 dev_info(&pdev->dev,
3362                          "online status unreliable, applying workaround\n");
3363         }
3364
3365         /* CAP.NP sometimes indicate the index of the last enabled
3366          * port, at other times, that of the last possible port, so
3367          * determining the maximum port number requires looking at
3368          * both CAP.NP and port_map.
3369          */
3370         n_ports = max(ahci_nr_ports(hpriv->cap), fls(hpriv->port_map));
3371
3372         host = ata_host_alloc_pinfo(&pdev->dev, ppi, n_ports);
3373         if (!host)
3374                 return -ENOMEM;
3375         host->iomap = pcim_iomap_table(pdev);
3376         host->private_data = hpriv;
3377
3378         if (!(hpriv->cap & HOST_CAP_SSS) || ahci_ignore_sss)
3379                 host->flags |= ATA_HOST_PARALLEL_SCAN;
3380         else
3381                 printk(KERN_INFO "ahci: SSS flag set, parallel bus scan disabled\n");
3382
3383         if (pi.flags & ATA_FLAG_EM)
3384                 ahci_reset_em(host);
3385
3386         for (i = 0; i < host->n_ports; i++) {
3387                 struct ata_port *ap = host->ports[i];
3388
3389                 ata_port_pbar_desc(ap, AHCI_PCI_BAR, -1, "abar");
3390                 ata_port_pbar_desc(ap, AHCI_PCI_BAR,
3391                                    0x100 + ap->port_no * 0x80, "port");
3392
3393                 /* set initial link pm policy */
3394                 ap->pm_policy = NOT_AVAILABLE;
3395
3396                 /* set enclosure management message type */
3397                 if (ap->flags & ATA_FLAG_EM)
3398                         ap->em_message_type = ahci_em_messages;
3399
3400
3401                 /* disabled/not-implemented port */
3402                 if (!(hpriv->port_map & (1 << i)))
3403                         ap->ops = &ata_dummy_port_ops;
3404         }
3405
3406         /* apply workaround for ASUS P5W DH Deluxe mainboard */
3407         ahci_p5wdh_workaround(host);
3408
3409         /* apply gtf filter quirk */
3410         ahci_gtf_filter_workaround(host);
3411
3412         /* initialize adapter */
3413         rc = ahci_configure_dma_masks(pdev, hpriv->cap & HOST_CAP_64);
3414         if (rc)
3415                 return rc;
3416
3417         rc = ahci_reset_controller(host);
3418         if (rc)
3419                 return rc;
3420
3421         ahci_init_controller(host);
3422         ahci_print_info(host);
3423
3424         pci_set_master(pdev);
3425         return ata_host_activate(host, pdev->irq, ahci_interrupt, IRQF_SHARED,
3426                                  &ahci_sht);
3427 }
3428
3429 static int __init ahci_init(void)
3430 {
3431         return pci_register_driver(&ahci_pci_driver);
3432 }
3433
3434 static void __exit ahci_exit(void)
3435 {
3436         pci_unregister_driver(&ahci_pci_driver);
3437 }
3438
3439
3440 MODULE_AUTHOR("Jeff Garzik");
3441 MODULE_DESCRIPTION("AHCI SATA low-level driver");
3442 MODULE_LICENSE("GPL");
3443 MODULE_DEVICE_TABLE(pci, ahci_pci_tbl);
3444 MODULE_VERSION(DRV_VERSION);
3445
3446 module_init(ahci_init);
3447 module_exit(ahci_exit);