Pull bugzilla-5452 into release branch
[pandora-kernel.git] / drivers / acpi / namespace / nsutils.c
1 /******************************************************************************
2  *
3  * Module Name: nsutils - Utilities for accessing ACPI namespace, accessing
4  *                        parents and siblings and Scope manipulation
5  *
6  *****************************************************************************/
7
8 /*
9  * Copyright (C) 2000 - 2006, R. Byron Moore
10  * All rights reserved.
11  *
12  * Redistribution and use in source and binary forms, with or without
13  * modification, are permitted provided that the following conditions
14  * are met:
15  * 1. Redistributions of source code must retain the above copyright
16  *    notice, this list of conditions, and the following disclaimer,
17  *    without modification.
18  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
19  *    substantially similar to the "NO WARRANTY" disclaimer below
20  *    ("Disclaimer") and any redistribution must be conditioned upon
21  *    including a substantially similar Disclaimer requirement for further
22  *    binary redistribution.
23  * 3. Neither the names of the above-listed copyright holders nor the names
24  *    of any contributors may be used to endorse or promote products derived
25  *    from this software without specific prior written permission.
26  *
27  * Alternatively, this software may be distributed under the terms of the
28  * GNU General Public License ("GPL") version 2 as published by the Free
29  * Software Foundation.
30  *
31  * NO WARRANTY
32  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
33  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
34  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
35  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
36  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
37  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
38  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
39  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
40  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
41  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
42  * POSSIBILITY OF SUCH DAMAGES.
43  */
44
45 #include <acpi/acpi.h>
46 #include <acpi/acnamesp.h>
47 #include <acpi/amlcode.h>
48 #include <acpi/actables.h>
49
50 #define _COMPONENT          ACPI_NAMESPACE
51 ACPI_MODULE_NAME("nsutils")
52
53 /* Local prototypes */
54 static u8 acpi_ns_valid_path_separator(char sep);
55
56 #ifdef ACPI_OBSOLETE_FUNCTIONS
57 acpi_name acpi_ns_find_parent_name(struct acpi_namespace_node *node_to_search);
58 #endif
59
60 /*******************************************************************************
61  *
62  * FUNCTION:    acpi_ns_report_error
63  *
64  * PARAMETERS:  module_name         - Caller's module name (for error output)
65  *              line_number         - Caller's line number (for error output)
66  *              internal_name       - Name or path of the namespace node
67  *              lookup_status       - Exception code from NS lookup
68  *
69  * RETURN:      None
70  *
71  * DESCRIPTION: Print warning message with full pathname
72  *
73  ******************************************************************************/
74
75 void
76 acpi_ns_report_error(char *module_name,
77                      u32 line_number,
78                      char *internal_name, acpi_status lookup_status)
79 {
80         acpi_status status;
81         u32 bad_name;
82         char *name = NULL;
83
84         acpi_os_printf("ACPI Error (%s-%04d): ", module_name, line_number);
85
86         if (lookup_status == AE_BAD_CHARACTER) {
87
88                 /* There is a non-ascii character in the name */
89
90                 ACPI_MOVE_32_TO_32(&bad_name, internal_name);
91                 acpi_os_printf("[0x%4.4X] (NON-ASCII)", bad_name);
92         } else {
93                 /* Convert path to external format */
94
95                 status = acpi_ns_externalize_name(ACPI_UINT32_MAX,
96                                                   internal_name, NULL, &name);
97
98                 /* Print target name */
99
100                 if (ACPI_SUCCESS(status)) {
101                         acpi_os_printf("[%s]", name);
102                 } else {
103                         acpi_os_printf("[COULD NOT EXTERNALIZE NAME]");
104                 }
105
106                 if (name) {
107                         ACPI_FREE(name);
108                 }
109         }
110
111         acpi_os_printf(" Namespace lookup failure, %s\n",
112                        acpi_format_exception(lookup_status));
113 }
114
115 /*******************************************************************************
116  *
117  * FUNCTION:    acpi_ns_report_method_error
118  *
119  * PARAMETERS:  module_name         - Caller's module name (for error output)
120  *              line_number         - Caller's line number (for error output)
121  *              Message             - Error message to use on failure
122  *              prefix_node         - Prefix relative to the path
123  *              Path                - Path to the node (optional)
124  *              method_status       - Execution status
125  *
126  * RETURN:      None
127  *
128  * DESCRIPTION: Print warning message with full pathname
129  *
130  ******************************************************************************/
131
132 void
133 acpi_ns_report_method_error(char *module_name,
134                             u32 line_number,
135                             char *message,
136                             struct acpi_namespace_node *prefix_node,
137                             char *path, acpi_status method_status)
138 {
139         acpi_status status;
140         struct acpi_namespace_node *node = prefix_node;
141
142         acpi_os_printf("ACPI Error (%s-%04d): ", module_name, line_number);
143
144         if (path) {
145                 status =
146                     acpi_ns_get_node(prefix_node, path, ACPI_NS_NO_UPSEARCH,
147                                      &node);
148                 if (ACPI_FAILURE(status)) {
149                         acpi_os_printf("[Could not get node by pathname]");
150                 }
151         }
152
153         acpi_ns_print_node_pathname(node, message);
154         acpi_os_printf(", %s\n", acpi_format_exception(method_status));
155 }
156
157 /*******************************************************************************
158  *
159  * FUNCTION:    acpi_ns_print_node_pathname
160  *
161  * PARAMETERS:  Node            - Object
162  *              Message         - Prefix message
163  *
164  * DESCRIPTION: Print an object's full namespace pathname
165  *              Manages allocation/freeing of a pathname buffer
166  *
167  ******************************************************************************/
168
169 void
170 acpi_ns_print_node_pathname(struct acpi_namespace_node *node, char *message)
171 {
172         struct acpi_buffer buffer;
173         acpi_status status;
174
175         if (!node) {
176                 acpi_os_printf("[NULL NAME]");
177                 return;
178         }
179
180         /* Convert handle to full pathname and print it (with supplied message) */
181
182         buffer.length = ACPI_ALLOCATE_LOCAL_BUFFER;
183
184         status = acpi_ns_handle_to_pathname(node, &buffer);
185         if (ACPI_SUCCESS(status)) {
186                 if (message) {
187                         acpi_os_printf("%s ", message);
188                 }
189
190                 acpi_os_printf("[%s] (Node %p)", (char *)buffer.pointer, node);
191                 ACPI_FREE(buffer.pointer);
192         }
193 }
194
195 /*******************************************************************************
196  *
197  * FUNCTION:    acpi_ns_valid_root_prefix
198  *
199  * PARAMETERS:  Prefix          - Character to be checked
200  *
201  * RETURN:      TRUE if a valid prefix
202  *
203  * DESCRIPTION: Check if a character is a valid ACPI Root prefix
204  *
205  ******************************************************************************/
206
207 u8 acpi_ns_valid_root_prefix(char prefix)
208 {
209
210         return ((u8) (prefix == '\\'));
211 }
212
213 /*******************************************************************************
214  *
215  * FUNCTION:    acpi_ns_valid_path_separator
216  *
217  * PARAMETERS:  Sep         - Character to be checked
218  *
219  * RETURN:      TRUE if a valid path separator
220  *
221  * DESCRIPTION: Check if a character is a valid ACPI path separator
222  *
223  ******************************************************************************/
224
225 static u8 acpi_ns_valid_path_separator(char sep)
226 {
227
228         return ((u8) (sep == '.'));
229 }
230
231 /*******************************************************************************
232  *
233  * FUNCTION:    acpi_ns_get_type
234  *
235  * PARAMETERS:  Node        - Parent Node to be examined
236  *
237  * RETURN:      Type field from Node whose handle is passed
238  *
239  * DESCRIPTION: Return the type of a Namespace node
240  *
241  ******************************************************************************/
242
243 acpi_object_type acpi_ns_get_type(struct acpi_namespace_node * node)
244 {
245         ACPI_FUNCTION_TRACE(ns_get_type);
246
247         if (!node) {
248                 ACPI_WARNING((AE_INFO, "Null Node parameter"));
249                 return_UINT32(ACPI_TYPE_ANY);
250         }
251
252         return_UINT32((acpi_object_type) node->type);
253 }
254
255 /*******************************************************************************
256  *
257  * FUNCTION:    acpi_ns_local
258  *
259  * PARAMETERS:  Type        - A namespace object type
260  *
261  * RETURN:      LOCAL if names must be found locally in objects of the
262  *              passed type, 0 if enclosing scopes should be searched
263  *
264  * DESCRIPTION: Returns scope rule for the given object type.
265  *
266  ******************************************************************************/
267
268 u32 acpi_ns_local(acpi_object_type type)
269 {
270         ACPI_FUNCTION_TRACE(ns_local);
271
272         if (!acpi_ut_valid_object_type(type)) {
273
274                 /* Type code out of range  */
275
276                 ACPI_WARNING((AE_INFO, "Invalid Object Type %X", type));
277                 return_UINT32(ACPI_NS_NORMAL);
278         }
279
280         return_UINT32((u32) acpi_gbl_ns_properties[type] & ACPI_NS_LOCAL);
281 }
282
283 /*******************************************************************************
284  *
285  * FUNCTION:    acpi_ns_get_internal_name_length
286  *
287  * PARAMETERS:  Info            - Info struct initialized with the
288  *                                external name pointer.
289  *
290  * RETURN:      None
291  *
292  * DESCRIPTION: Calculate the length of the internal (AML) namestring
293  *              corresponding to the external (ASL) namestring.
294  *
295  ******************************************************************************/
296
297 void acpi_ns_get_internal_name_length(struct acpi_namestring_info *info)
298 {
299         char *next_external_char;
300         u32 i;
301
302         ACPI_FUNCTION_ENTRY();
303
304         next_external_char = info->external_name;
305         info->num_carats = 0;
306         info->num_segments = 0;
307         info->fully_qualified = FALSE;
308
309         /*
310          * For the internal name, the required length is 4 bytes per segment, plus
311          * 1 each for root_prefix, multi_name_prefix_op, segment count, trailing null
312          * (which is not really needed, but no there's harm in putting it there)
313          *
314          * strlen() + 1 covers the first name_seg, which has no path separator
315          */
316         if (acpi_ns_valid_root_prefix(next_external_char[0])) {
317                 info->fully_qualified = TRUE;
318                 next_external_char++;
319         } else {
320                 /*
321                  * Handle Carat prefixes
322                  */
323                 while (*next_external_char == '^') {
324                         info->num_carats++;
325                         next_external_char++;
326                 }
327         }
328
329         /*
330          * Determine the number of ACPI name "segments" by counting the number of
331          * path separators within the string. Start with one segment since the
332          * segment count is [(# separators) + 1], and zero separators is ok.
333          */
334         if (*next_external_char) {
335                 info->num_segments = 1;
336                 for (i = 0; next_external_char[i]; i++) {
337                         if (acpi_ns_valid_path_separator(next_external_char[i])) {
338                                 info->num_segments++;
339                         }
340                 }
341         }
342
343         info->length = (ACPI_NAME_SIZE * info->num_segments) +
344             4 + info->num_carats;
345
346         info->next_external_char = next_external_char;
347 }
348
349 /*******************************************************************************
350  *
351  * FUNCTION:    acpi_ns_build_internal_name
352  *
353  * PARAMETERS:  Info            - Info struct fully initialized
354  *
355  * RETURN:      Status
356  *
357  * DESCRIPTION: Construct the internal (AML) namestring
358  *              corresponding to the external (ASL) namestring.
359  *
360  ******************************************************************************/
361
362 acpi_status acpi_ns_build_internal_name(struct acpi_namestring_info *info)
363 {
364         u32 num_segments = info->num_segments;
365         char *internal_name = info->internal_name;
366         char *external_name = info->next_external_char;
367         char *result = NULL;
368         acpi_native_uint i;
369
370         ACPI_FUNCTION_TRACE(ns_build_internal_name);
371
372         /* Setup the correct prefixes, counts, and pointers */
373
374         if (info->fully_qualified) {
375                 internal_name[0] = '\\';
376
377                 if (num_segments <= 1) {
378                         result = &internal_name[1];
379                 } else if (num_segments == 2) {
380                         internal_name[1] = AML_DUAL_NAME_PREFIX;
381                         result = &internal_name[2];
382                 } else {
383                         internal_name[1] = AML_MULTI_NAME_PREFIX_OP;
384                         internal_name[2] = (char)num_segments;
385                         result = &internal_name[3];
386                 }
387         } else {
388                 /*
389                  * Not fully qualified.
390                  * Handle Carats first, then append the name segments
391                  */
392                 i = 0;
393                 if (info->num_carats) {
394                         for (i = 0; i < info->num_carats; i++) {
395                                 internal_name[i] = '^';
396                         }
397                 }
398
399                 if (num_segments <= 1) {
400                         result = &internal_name[i];
401                 } else if (num_segments == 2) {
402                         internal_name[i] = AML_DUAL_NAME_PREFIX;
403                         result = &internal_name[(acpi_native_uint) (i + 1)];
404                 } else {
405                         internal_name[i] = AML_MULTI_NAME_PREFIX_OP;
406                         internal_name[(acpi_native_uint) (i + 1)] =
407                             (char)num_segments;
408                         result = &internal_name[(acpi_native_uint) (i + 2)];
409                 }
410         }
411
412         /* Build the name (minus path separators) */
413
414         for (; num_segments; num_segments--) {
415                 for (i = 0; i < ACPI_NAME_SIZE; i++) {
416                         if (acpi_ns_valid_path_separator(*external_name) ||
417                             (*external_name == 0)) {
418
419                                 /* Pad the segment with underscore(s) if segment is short */
420
421                                 result[i] = '_';
422                         } else {
423                                 /* Convert the character to uppercase and save it */
424
425                                 result[i] =
426                                     (char)ACPI_TOUPPER((int)*external_name);
427                                 external_name++;
428                         }
429                 }
430
431                 /* Now we must have a path separator, or the pathname is bad */
432
433                 if (!acpi_ns_valid_path_separator(*external_name) &&
434                     (*external_name != 0)) {
435                         return_ACPI_STATUS(AE_BAD_PARAMETER);
436                 }
437
438                 /* Move on the next segment */
439
440                 external_name++;
441                 result += ACPI_NAME_SIZE;
442         }
443
444         /* Terminate the string */
445
446         *result = 0;
447
448         if (info->fully_qualified) {
449                 ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
450                                   "Returning [%p] (abs) \"\\%s\"\n",
451                                   internal_name, internal_name));
452         } else {
453                 ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "Returning [%p] (rel) \"%s\"\n",
454                                   internal_name, internal_name));
455         }
456
457         return_ACPI_STATUS(AE_OK);
458 }
459
460 /*******************************************************************************
461  *
462  * FUNCTION:    acpi_ns_internalize_name
463  *
464  * PARAMETERS:  *external_name          - External representation of name
465  *              **Converted Name        - Where to return the resulting
466  *                                        internal represention of the name
467  *
468  * RETURN:      Status
469  *
470  * DESCRIPTION: Convert an external representation (e.g. "\_PR_.CPU0")
471  *              to internal form (e.g. 5c 2f 02 5f 50 52 5f 43 50 55 30)
472  *
473  *******************************************************************************/
474
475 acpi_status acpi_ns_internalize_name(char *external_name, char **converted_name)
476 {
477         char *internal_name;
478         struct acpi_namestring_info info;
479         acpi_status status;
480
481         ACPI_FUNCTION_TRACE(ns_internalize_name);
482
483         if ((!external_name) || (*external_name == 0) || (!converted_name)) {
484                 return_ACPI_STATUS(AE_BAD_PARAMETER);
485         }
486
487         /* Get the length of the new internal name */
488
489         info.external_name = external_name;
490         acpi_ns_get_internal_name_length(&info);
491
492         /* We need a segment to store the internal  name */
493
494         internal_name = ACPI_ALLOCATE_ZEROED(info.length);
495         if (!internal_name) {
496                 return_ACPI_STATUS(AE_NO_MEMORY);
497         }
498
499         /* Build the name */
500
501         info.internal_name = internal_name;
502         status = acpi_ns_build_internal_name(&info);
503         if (ACPI_FAILURE(status)) {
504                 ACPI_FREE(internal_name);
505                 return_ACPI_STATUS(status);
506         }
507
508         *converted_name = internal_name;
509         return_ACPI_STATUS(AE_OK);
510 }
511
512 /*******************************************************************************
513  *
514  * FUNCTION:    acpi_ns_externalize_name
515  *
516  * PARAMETERS:  internal_name_length - Lenth of the internal name below
517  *              internal_name       - Internal representation of name
518  *              converted_name_length - Where the length is returned
519  *              converted_name      - Where the resulting external name
520  *                                    is returned
521  *
522  * RETURN:      Status
523  *
524  * DESCRIPTION: Convert internal name (e.g. 5c 2f 02 5f 50 52 5f 43 50 55 30)
525  *              to its external (printable) form (e.g. "\_PR_.CPU0")
526  *
527  ******************************************************************************/
528
529 acpi_status
530 acpi_ns_externalize_name(u32 internal_name_length,
531                          char *internal_name,
532                          u32 * converted_name_length, char **converted_name)
533 {
534         acpi_native_uint names_index = 0;
535         acpi_native_uint num_segments = 0;
536         acpi_native_uint required_length;
537         acpi_native_uint prefix_length = 0;
538         acpi_native_uint i = 0;
539         acpi_native_uint j = 0;
540
541         ACPI_FUNCTION_TRACE(ns_externalize_name);
542
543         if (!internal_name_length || !internal_name || !converted_name) {
544                 return_ACPI_STATUS(AE_BAD_PARAMETER);
545         }
546
547         /*
548          * Check for a prefix (one '\' | one or more '^').
549          */
550         switch (internal_name[0]) {
551         case '\\':
552                 prefix_length = 1;
553                 break;
554
555         case '^':
556                 for (i = 0; i < internal_name_length; i++) {
557                         if (internal_name[i] == '^') {
558                                 prefix_length = i + 1;
559                         } else {
560                                 break;
561                         }
562                 }
563
564                 if (i == internal_name_length) {
565                         prefix_length = i;
566                 }
567
568                 break;
569
570         default:
571                 break;
572         }
573
574         /*
575          * Check for object names.  Note that there could be 0-255 of these
576          * 4-byte elements.
577          */
578         if (prefix_length < internal_name_length) {
579                 switch (internal_name[prefix_length]) {
580                 case AML_MULTI_NAME_PREFIX_OP:
581
582                         /* <count> 4-byte names */
583
584                         names_index = prefix_length + 2;
585                         num_segments = (acpi_native_uint) (u8)
586                             internal_name[(acpi_native_uint)
587                                           (prefix_length + 1)];
588                         break;
589
590                 case AML_DUAL_NAME_PREFIX:
591
592                         /* Two 4-byte names */
593
594                         names_index = prefix_length + 1;
595                         num_segments = 2;
596                         break;
597
598                 case 0:
599
600                         /* null_name */
601
602                         names_index = 0;
603                         num_segments = 0;
604                         break;
605
606                 default:
607
608                         /* one 4-byte name */
609
610                         names_index = prefix_length;
611                         num_segments = 1;
612                         break;
613                 }
614         }
615
616         /*
617          * Calculate the length of converted_name, which equals the length
618          * of the prefix, length of all object names, length of any required
619          * punctuation ('.') between object names, plus the NULL terminator.
620          */
621         required_length = prefix_length + (4 * num_segments) +
622             ((num_segments > 0) ? (num_segments - 1) : 0) + 1;
623
624         /*
625          * Check to see if we're still in bounds.  If not, there's a problem
626          * with internal_name (invalid format).
627          */
628         if (required_length > internal_name_length) {
629                 ACPI_ERROR((AE_INFO, "Invalid internal name"));
630                 return_ACPI_STATUS(AE_BAD_PATHNAME);
631         }
632
633         /*
634          * Build converted_name
635          */
636         *converted_name = ACPI_ALLOCATE_ZEROED(required_length);
637         if (!(*converted_name)) {
638                 return_ACPI_STATUS(AE_NO_MEMORY);
639         }
640
641         j = 0;
642
643         for (i = 0; i < prefix_length; i++) {
644                 (*converted_name)[j++] = internal_name[i];
645         }
646
647         if (num_segments > 0) {
648                 for (i = 0; i < num_segments; i++) {
649                         if (i > 0) {
650                                 (*converted_name)[j++] = '.';
651                         }
652
653                         (*converted_name)[j++] = internal_name[names_index++];
654                         (*converted_name)[j++] = internal_name[names_index++];
655                         (*converted_name)[j++] = internal_name[names_index++];
656                         (*converted_name)[j++] = internal_name[names_index++];
657                 }
658         }
659
660         if (converted_name_length) {
661                 *converted_name_length = (u32) required_length;
662         }
663
664         return_ACPI_STATUS(AE_OK);
665 }
666
667 /*******************************************************************************
668  *
669  * FUNCTION:    acpi_ns_map_handle_to_node
670  *
671  * PARAMETERS:  Handle          - Handle to be converted to an Node
672  *
673  * RETURN:      A Name table entry pointer
674  *
675  * DESCRIPTION: Convert a namespace handle to a real Node
676  *
677  * Note: Real integer handles would allow for more verification
678  *       and keep all pointers within this subsystem - however this introduces
679  *       more (and perhaps unnecessary) overhead.
680  *
681  ******************************************************************************/
682
683 struct acpi_namespace_node *acpi_ns_map_handle_to_node(acpi_handle handle)
684 {
685
686         ACPI_FUNCTION_ENTRY();
687
688         /*
689          * Simple implementation
690          */
691         if ((!handle) || (handle == ACPI_ROOT_OBJECT)) {
692                 return (acpi_gbl_root_node);
693         }
694
695         /* We can at least attempt to verify the handle */
696
697         if (ACPI_GET_DESCRIPTOR_TYPE(handle) != ACPI_DESC_TYPE_NAMED) {
698                 return (NULL);
699         }
700
701         return (ACPI_CAST_PTR(struct acpi_namespace_node, handle));
702 }
703
704 /*******************************************************************************
705  *
706  * FUNCTION:    acpi_ns_convert_entry_to_handle
707  *
708  * PARAMETERS:  Node          - Node to be converted to a Handle
709  *
710  * RETURN:      A user handle
711  *
712  * DESCRIPTION: Convert a real Node to a namespace handle
713  *
714  ******************************************************************************/
715
716 acpi_handle acpi_ns_convert_entry_to_handle(struct acpi_namespace_node *node)
717 {
718
719         /*
720          * Simple implementation for now;
721          */
722         return ((acpi_handle) node);
723
724 /* Example future implementation ---------------------
725
726         if (!Node)
727         {
728                 return (NULL);
729         }
730
731         if (Node == acpi_gbl_root_node)
732         {
733                 return (ACPI_ROOT_OBJECT);
734         }
735
736         return ((acpi_handle) Node);
737 ------------------------------------------------------*/
738 }
739
740 /*******************************************************************************
741  *
742  * FUNCTION:    acpi_ns_terminate
743  *
744  * PARAMETERS:  none
745  *
746  * RETURN:      none
747  *
748  * DESCRIPTION: free memory allocated for namespace and ACPI table storage.
749  *
750  ******************************************************************************/
751
752 void acpi_ns_terminate(void)
753 {
754         union acpi_operand_object *obj_desc;
755
756         ACPI_FUNCTION_TRACE(ns_terminate);
757
758         /*
759          * 1) Free the entire namespace -- all nodes and objects
760          *
761          * Delete all object descriptors attached to namepsace nodes
762          */
763         acpi_ns_delete_namespace_subtree(acpi_gbl_root_node);
764
765         /* Detach any objects attached to the root */
766
767         obj_desc = acpi_ns_get_attached_object(acpi_gbl_root_node);
768         if (obj_desc) {
769                 acpi_ns_detach_object(acpi_gbl_root_node);
770         }
771
772         ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Namespace freed\n"));
773
774         /*
775          * 2) Now we can delete the ACPI tables
776          */
777         acpi_tb_delete_all_tables();
778         ACPI_DEBUG_PRINT((ACPI_DB_INFO, "ACPI Tables freed\n"));
779
780         return_VOID;
781 }
782
783 /*******************************************************************************
784  *
785  * FUNCTION:    acpi_ns_opens_scope
786  *
787  * PARAMETERS:  Type        - A valid namespace type
788  *
789  * RETURN:      NEWSCOPE if the passed type "opens a name scope" according
790  *              to the ACPI specification, else 0
791  *
792  ******************************************************************************/
793
794 u32 acpi_ns_opens_scope(acpi_object_type type)
795 {
796         ACPI_FUNCTION_TRACE_STR(ns_opens_scope, acpi_ut_get_type_name(type));
797
798         if (!acpi_ut_valid_object_type(type)) {
799
800                 /* type code out of range  */
801
802                 ACPI_WARNING((AE_INFO, "Invalid Object Type %X", type));
803                 return_UINT32(ACPI_NS_NORMAL);
804         }
805
806         return_UINT32(((u32) acpi_gbl_ns_properties[type]) & ACPI_NS_NEWSCOPE);
807 }
808
809 /*******************************************************************************
810  *
811  * FUNCTION:    acpi_ns_get_node
812  *
813  * PARAMETERS:  *Pathname   - Name to be found, in external (ASL) format. The
814  *                            \ (backslash) and ^ (carat) prefixes, and the
815  *                            . (period) to separate segments are supported.
816  *              prefix_node  - Root of subtree to be searched, or NS_ALL for the
817  *                            root of the name space.  If Name is fully
818  *                            qualified (first s8 is '\'), the passed value
819  *                            of Scope will not be accessed.
820  *              Flags       - Used to indicate whether to perform upsearch or
821  *                            not.
822  *              return_node - Where the Node is returned
823  *
824  * DESCRIPTION: Look up a name relative to a given scope and return the
825  *              corresponding Node.  NOTE: Scope can be null.
826  *
827  * MUTEX:       Locks namespace
828  *
829  ******************************************************************************/
830
831 acpi_status
832 acpi_ns_get_node(struct acpi_namespace_node *prefix_node,
833                  char *pathname,
834                  u32 flags, struct acpi_namespace_node **return_node)
835 {
836         union acpi_generic_state scope_info;
837         acpi_status status;
838         char *internal_path;
839
840         ACPI_FUNCTION_TRACE_PTR(ns_get_node, pathname);
841
842         if (!pathname) {
843                 *return_node = prefix_node;
844                 if (!prefix_node) {
845                         *return_node = acpi_gbl_root_node;
846                 }
847                 return_ACPI_STATUS(AE_OK);
848         }
849
850         /* Convert path to internal representation */
851
852         status = acpi_ns_internalize_name(pathname, &internal_path);
853         if (ACPI_FAILURE(status)) {
854                 return_ACPI_STATUS(status);
855         }
856
857         /* Must lock namespace during lookup */
858
859         status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE);
860         if (ACPI_FAILURE(status)) {
861                 goto cleanup;
862         }
863
864         /* Setup lookup scope (search starting point) */
865
866         scope_info.scope.node = prefix_node;
867
868         /* Lookup the name in the namespace */
869
870         status = acpi_ns_lookup(&scope_info, internal_path, ACPI_TYPE_ANY,
871                                 ACPI_IMODE_EXECUTE,
872                                 (flags | ACPI_NS_DONT_OPEN_SCOPE), NULL,
873                                 return_node);
874         if (ACPI_FAILURE(status)) {
875                 ACPI_DEBUG_PRINT((ACPI_DB_INFO, "%s, %s\n",
876                                   pathname, acpi_format_exception(status)));
877         }
878
879         (void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE);
880
881       cleanup:
882         ACPI_FREE(internal_path);
883         return_ACPI_STATUS(status);
884 }
885
886 /*******************************************************************************
887  *
888  * FUNCTION:    acpi_ns_get_parent_node
889  *
890  * PARAMETERS:  Node       - Current table entry
891  *
892  * RETURN:      Parent entry of the given entry
893  *
894  * DESCRIPTION: Obtain the parent entry for a given entry in the namespace.
895  *
896  ******************************************************************************/
897
898 struct acpi_namespace_node *acpi_ns_get_parent_node(struct acpi_namespace_node
899                                                     *node)
900 {
901         ACPI_FUNCTION_ENTRY();
902
903         if (!node) {
904                 return (NULL);
905         }
906
907         /*
908          * Walk to the end of this peer list. The last entry is marked with a flag
909          * and the peer pointer is really a pointer back to the parent. This saves
910          * putting a parent back pointer in each and every named object!
911          */
912         while (!(node->flags & ANOBJ_END_OF_PEER_LIST)) {
913                 node = node->peer;
914         }
915
916         return (node->peer);
917 }
918
919 /*******************************************************************************
920  *
921  * FUNCTION:    acpi_ns_get_next_valid_node
922  *
923  * PARAMETERS:  Node       - Current table entry
924  *
925  * RETURN:      Next valid Node in the linked node list. NULL if no more valid
926  *              nodes.
927  *
928  * DESCRIPTION: Find the next valid node within a name table.
929  *              Useful for implementing NULL-end-of-list loops.
930  *
931  ******************************************************************************/
932
933 struct acpi_namespace_node *acpi_ns_get_next_valid_node(struct
934                                                         acpi_namespace_node
935                                                         *node)
936 {
937
938         /* If we are at the end of this peer list, return NULL */
939
940         if (node->flags & ANOBJ_END_OF_PEER_LIST) {
941                 return NULL;
942         }
943
944         /* Otherwise just return the next peer */
945
946         return (node->peer);
947 }
948
949 #ifdef ACPI_OBSOLETE_FUNCTIONS
950 /*******************************************************************************
951  *
952  * FUNCTION:    acpi_ns_find_parent_name
953  *
954  * PARAMETERS:  *child_node            - Named Obj whose name is to be found
955  *
956  * RETURN:      The ACPI name
957  *
958  * DESCRIPTION: Search for the given obj in its parent scope and return the
959  *              name segment, or "????" if the parent name can't be found
960  *              (which "should not happen").
961  *
962  ******************************************************************************/
963
964 acpi_name acpi_ns_find_parent_name(struct acpi_namespace_node * child_node)
965 {
966         struct acpi_namespace_node *parent_node;
967
968         ACPI_FUNCTION_TRACE(ns_find_parent_name);
969
970         if (child_node) {
971
972                 /* Valid entry.  Get the parent Node */
973
974                 parent_node = acpi_ns_get_parent_node(child_node);
975                 if (parent_node) {
976                         ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
977                                           "Parent of %p [%4.4s] is %p [%4.4s]\n",
978                                           child_node,
979                                           acpi_ut_get_node_name(child_node),
980                                           parent_node,
981                                           acpi_ut_get_node_name(parent_node)));
982
983                         if (parent_node->name.integer) {
984                                 return_VALUE((acpi_name) parent_node->name.
985                                              integer);
986                         }
987                 }
988
989                 ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
990                                   "Unable to find parent of %p (%4.4s)\n",
991                                   child_node,
992                                   acpi_ut_get_node_name(child_node)));
993         }
994
995         return_VALUE(ACPI_UNKNOWN_NAME);
996 }
997 #endif