drivers/acpi/hardware/hwregs.c

   1
   2 /*******************************************************************************
   3  *
   4  * Module Name: hwregs - Read/write access functions for the various ACPI
   5  *                       control and status registers.
   6  *
   7  ******************************************************************************/
   8
   9 /*
  10  * Copyright (C) 2000 - 2006, R. Byron Moore
  11  * All rights reserved.
  12  *
  13  * Redistribution and use in source and binary forms, with or without
  14  * modification, are permitted provided that the following conditions
  15  * are met:
  16  * 1. Redistributions of source code must retain the above copyright
  17  *    notice, this list of conditions, and the following disclaimer,
  18  *    without modification.
  19  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
  20  *    substantially similar to the "NO WARRANTY" disclaimer below
  21  *    ("Disclaimer") and any redistribution must be conditioned upon
  22  *    including a substantially similar Disclaimer requirement for further
  23  *    binary redistribution.
  24  * 3. Neither the names of the above-listed copyright holders nor the names
  25  *    of any contributors may be used to endorse or promote products derived
  26  *    from this software without specific prior written permission.
  27  *
  28  * Alternatively, this software may be distributed under the terms of the
  29  * GNU General Public License ("GPL") version 2 as published by the Free
  30  * Software Foundation.
  31  *
  32  * NO WARRANTY
  33  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  34  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  35  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
  36  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  37  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  38  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  39  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  40  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
  41  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
  42  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  43  * POSSIBILITY OF SUCH DAMAGES.
  44  */
  45
  46 #include <acpi/acpi.h>
  47 #include <acpi/acnamesp.h>
  48 #include <acpi/acevents.h>
  49
  50 #define _COMPONENT          ACPI_HARDWARE
  51 ACPI_MODULE_NAME("hwregs")
  52
  53 /*******************************************************************************
  54  *
  55  * FUNCTION:    acpi_hw_clear_acpi_status
  56  *
  57  * PARAMETERS:  Flags           - Lock the hardware or not
  58  *
  59  * RETURN:      none
  60  *
  61  * DESCRIPTION: Clears all fixed and general purpose status bits
  62  *              THIS FUNCTION MUST BE CALLED WITH INTERRUPTS DISABLED
  63  *
  64  * NOTE: TBD: Flags parameter is obsolete, to be removed
  65  *
  66  ******************************************************************************/
  67 acpi_status acpi_hw_clear_acpi_status(u32 flags)
  68 {
  69         acpi_status status;
  70         acpi_cpu_flags lock_flags = 0;
  71
  72         ACPI_FUNCTION_TRACE(hw_clear_acpi_status);
  73
  74         ACPI_DEBUG_PRINT((ACPI_DB_IO, "About to write %04X to %04X\n",
  75                           ACPI_BITMASK_ALL_FIXED_STATUS,
  76                           (u16) acpi_gbl_FADT->xpm1a_evt_blk.address));
  77
  78         lock_flags = acpi_os_acquire_lock(acpi_gbl_hardware_lock);
  79
  80         status = acpi_hw_register_write(ACPI_MTX_DO_NOT_LOCK,
  81                                         ACPI_REGISTER_PM1_STATUS,
  82                                         ACPI_BITMASK_ALL_FIXED_STATUS);
  83         if (ACPI_FAILURE(status)) {
  84                 goto unlock_and_exit;
  85         }
  86
  87         /* Clear the fixed events */
  88
  89         if (acpi_gbl_FADT->xpm1b_evt_blk.address) {
  90                 status =
  91                     acpi_hw_low_level_write(16, ACPI_BITMASK_ALL_FIXED_STATUS,
  92                                             &acpi_gbl_FADT->xpm1b_evt_blk);
  93                 if (ACPI_FAILURE(status)) {
  94                         goto unlock_and_exit;
  95                 }
  96         }
  97
  98         /* Clear the GPE Bits in all GPE registers in all GPE blocks */
  99
 100         status = acpi_ev_walk_gpe_list(acpi_hw_clear_gpe_block);
 101
 102       unlock_and_exit:
 103         acpi_os_release_lock(acpi_gbl_hardware_lock, lock_flags);
 104         return_ACPI_STATUS(status);
 105 }
 106
 107 /*******************************************************************************
 108  *
 109  * FUNCTION:    acpi_get_sleep_type_data
 110  *
 111  * PARAMETERS:  sleep_state         - Numeric sleep state
 112  *              *sleep_type_a        - Where SLP_TYPa is returned
 113  *              *sleep_type_b        - Where SLP_TYPb is returned
 114  *
 115  * RETURN:      Status - ACPI status
 116  *
 117  * DESCRIPTION: Obtain the SLP_TYPa and SLP_TYPb values for the requested sleep
 118  *              state.
 119  *
 120  ******************************************************************************/
 121
 122 acpi_status
 123 acpi_get_sleep_type_data(u8 sleep_state, u8 * sleep_type_a, u8 * sleep_type_b)
 124 {
 125         acpi_status status = AE_OK;
 126         struct acpi_evaluate_info *info;
 127
 128         ACPI_FUNCTION_TRACE(acpi_get_sleep_type_data);
 129
 130         /* Validate parameters */
 131
 132         if ((sleep_state > ACPI_S_STATES_MAX) || !sleep_type_a || !sleep_type_b) {
 133                 return_ACPI_STATUS(AE_BAD_PARAMETER);
 134         }
 135
 136         /* Allocate the evaluation information block */
 137
 138         info = ACPI_ALLOCATE_ZEROED(sizeof(struct acpi_evaluate_info));
 139         if (!info) {
 140                 return_ACPI_STATUS(AE_NO_MEMORY);
 141         }
 142
 143         info->pathname =
 144             ACPI_CAST_PTR(char, acpi_gbl_sleep_state_names[sleep_state]);
 145
 146         /* Evaluate the namespace object containing the values for this state */
 147
 148         status = acpi_ns_evaluate(info);
 149         if (ACPI_FAILURE(status)) {
 150                 ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
 151                                   "%s while evaluating SleepState [%s]\n",
 152                                   acpi_format_exception(status),
 153                                   info->pathname));
 154
 155                 goto cleanup;
 156         }
 157
 158         /* Must have a return object */
 159
 160         if (!info->return_object) {
 161                 ACPI_ERROR((AE_INFO, "No Sleep State object returned from [%s]",
 162                             info->pathname));
 163                 status = AE_NOT_EXIST;
 164         }
 165
 166         /* It must be of type Package */
 167
 168         else if (ACPI_GET_OBJECT_TYPE(info->return_object) != ACPI_TYPE_PACKAGE) {
 169                 ACPI_ERROR((AE_INFO,
 170                             "Sleep State return object is not a Package"));
 171                 status = AE_AML_OPERAND_TYPE;
 172         }
 173
 174         /*
 175          * The package must have at least two elements.  NOTE (March 2005): This
 176          * goes against the current ACPI spec which defines this object as a
 177          * package with one encoded DWORD element.  However, existing practice
 178          * by BIOS vendors seems to be to have 2 or more elements, at least
 179          * one per sleep type (A/B).
 180          */
 181         else if (info->return_object->package.count < 2) {
 182                 ACPI_ERROR((AE_INFO,
 183                             "Sleep State return package does not have at least two elements"));
 184                 status = AE_AML_NO_OPERAND;
 185         }
 186
 187         /* The first two elements must both be of type Integer */
 188
 189         else if ((ACPI_GET_OBJECT_TYPE(info->return_object->package.elements[0])
 190                   != ACPI_TYPE_INTEGER) ||
 191                  (ACPI_GET_OBJECT_TYPE(info->return_object->package.elements[1])
 192                   != ACPI_TYPE_INTEGER)) {
 193                 ACPI_ERROR((AE_INFO,
 194                             "Sleep State return package elements are not both Integers (%s, %s)",
 195                             acpi_ut_get_object_type_name(info->return_object->
 196                                                          package.elements[0]),
 197                             acpi_ut_get_object_type_name(info->return_object->
 198                                                          package.elements[1])));
 199                 status = AE_AML_OPERAND_TYPE;
 200         } else {
 201                 /* Valid _Sx_ package size, type, and value */
 202
 203                 *sleep_type_a = (u8)
 204                     (info->return_object->package.elements[0])->integer.value;
 205                 *sleep_type_b = (u8)
 206                     (info->return_object->package.elements[1])->integer.value;
 207         }
 208
 209         if (ACPI_FAILURE(status)) {
 210                 ACPI_EXCEPTION((AE_INFO, status,
 211                                 "While evaluating SleepState [%s], bad Sleep object %p type %s",
 212                                 info->pathname, info->return_object,
 213                                 acpi_ut_get_object_type_name(info->
 214                                                              return_object)));
 215         }
 216
 217         acpi_ut_remove_reference(info->return_object);
 218
 219       cleanup:
 220         ACPI_FREE(info);
 221         return_ACPI_STATUS(status);
 222 }
 223
 224 ACPI_EXPORT_SYMBOL(acpi_get_sleep_type_data)
 225
 226 /*******************************************************************************
 227  *
 228  * FUNCTION:    acpi_hw_get_register_bit_mask
 229  *
 230  * PARAMETERS:  register_id         - Index of ACPI Register to access
 231  *
 232  * RETURN:      The bitmask to be used when accessing the register
 233  *
 234  * DESCRIPTION: Map register_id into a register bitmask.
 235  *
 236  ******************************************************************************/
 237 struct acpi_bit_register_info *acpi_hw_get_bit_register_info(u32 register_id)
 238 {
 239         ACPI_FUNCTION_ENTRY();
 240
 241         if (register_id > ACPI_BITREG_MAX) {
 242                 ACPI_ERROR((AE_INFO, "Invalid BitRegister ID: %X",
 243                             register_id));
 244                 return (NULL);
 245         }
 246
 247         return (&acpi_gbl_bit_register_info[register_id]);
 248 }
 249
 250 /*******************************************************************************
 251  *
 252  * FUNCTION:    acpi_get_register
 253  *
 254  * PARAMETERS:  register_id     - ID of ACPI bit_register to access
 255  *              return_value    - Value that was read from the register
 256  *              Flags           - Lock the hardware or not
 257  *
 258  * RETURN:      Status and the value read from specified Register.  Value
 259  *              returned is normalized to bit0 (is shifted all the way right)
 260  *
 261  * DESCRIPTION: ACPI bit_register read function.
 262  *
 263  * NOTE: TBD: Flags parameter is obsolete, to be removed
 264  *
 265  ******************************************************************************/
 266
 267 acpi_status acpi_get_register(u32 register_id, u32 * return_value, u32 flags)
 268 {
 269         u32 register_value = 0;
 270         struct acpi_bit_register_info *bit_reg_info;
 271         acpi_status status;
 272
 273         ACPI_FUNCTION_TRACE(acpi_get_register);
 274
 275         /* Get the info structure corresponding to the requested ACPI Register */
 276
 277         bit_reg_info = acpi_hw_get_bit_register_info(register_id);
 278         if (!bit_reg_info) {
 279                 return_ACPI_STATUS(AE_BAD_PARAMETER);
 280         }
 281
 282         /* Read from the register */
 283
 284         status = acpi_hw_register_read(ACPI_MTX_LOCK,
 285                                        bit_reg_info->parent_register,
 286                                        &register_value);
 287
 288         if (ACPI_SUCCESS(status)) {
 289
 290                 /* Normalize the value that was read */
 291
 292                 register_value =
 293                     ((register_value & bit_reg_info->access_bit_mask)
 294                      >> bit_reg_info->bit_position);
 295
 296                 *return_value = register_value;
 297
 298                 ACPI_DEBUG_PRINT((ACPI_DB_IO, "Read value %8.8X register %X\n",
 299                                   register_value,
 300                                   bit_reg_info->parent_register));
 301         }
 302
 303         return_ACPI_STATUS(status);
 304 }
 305
 306 ACPI_EXPORT_SYMBOL(acpi_get_register)
 307
 308 /*******************************************************************************
 309  *
 310  * FUNCTION:    acpi_set_register
 311  *
 312  * PARAMETERS:  register_id     - ID of ACPI bit_register to access
 313  *              Value           - (only used on write) value to write to the
 314  *                                Register, NOT pre-normalized to the bit pos
 315  *              Flags           - Lock the hardware or not
 316  *
 317  * RETURN:      Status
 318  *
 319  * DESCRIPTION: ACPI Bit Register write function.
 320  *
 321  * NOTE: TBD: Flags parameter is obsolete, to be removed
 322  *
 323  ******************************************************************************/
 324 acpi_status acpi_set_register(u32 register_id, u32 value, u32 flags)
 325 {
 326         u32 register_value = 0;
 327         struct acpi_bit_register_info *bit_reg_info;
 328         acpi_status status;
 329         acpi_cpu_flags lock_flags;
 330
 331         ACPI_FUNCTION_TRACE_U32(acpi_set_register, register_id);
 332
 333         /* Get the info structure corresponding to the requested ACPI Register */
 334
 335         bit_reg_info = acpi_hw_get_bit_register_info(register_id);
 336         if (!bit_reg_info) {
 337                 ACPI_ERROR((AE_INFO, "Bad ACPI HW RegisterId: %X",
 338                             register_id));
 339                 return_ACPI_STATUS(AE_BAD_PARAMETER);
 340         }
 341
 342         lock_flags = acpi_os_acquire_lock(acpi_gbl_hardware_lock);
 343
 344         /* Always do a register read first so we can insert the new bits  */
 345
 346         status = acpi_hw_register_read(ACPI_MTX_DO_NOT_LOCK,
 347                                        bit_reg_info->parent_register,
 348                                        &register_value);
 349         if (ACPI_FAILURE(status)) {
 350                 goto unlock_and_exit;
 351         }
 352
 353         /*
 354          * Decode the Register ID
 355          * Register ID = [Register block ID] | [bit ID]
 356          *
 357          * Check bit ID to fine locate Register offset.
 358          * Check Mask to determine Register offset, and then read-write.
 359          */
 360         switch (bit_reg_info->parent_register) {
 361         case ACPI_REGISTER_PM1_STATUS:
 362
 363                 /*
 364                  * Status Registers are different from the rest.  Clear by
 365                  * writing 1, and writing 0 has no effect.  So, the only relevant
 366                  * information is the single bit we're interested in, all others should
 367                  * be written as 0 so they will be left unchanged.
 368                  */
 369                 value = ACPI_REGISTER_PREPARE_BITS(value,
 370                                                    bit_reg_info->bit_position,
 371                                                    bit_reg_info->
 372                                                    access_bit_mask);
 373                 if (value) {
 374                         status = acpi_hw_register_write(ACPI_MTX_DO_NOT_LOCK,
 375                                                         ACPI_REGISTER_PM1_STATUS,
 376                                                         (u16) value);
 377                         register_value = 0;
 378                 }
 379                 break;
 380
 381         case ACPI_REGISTER_PM1_ENABLE:
 382
 383                 ACPI_REGISTER_INSERT_VALUE(register_value,
 384                                            bit_reg_info->bit_position,
 385                                            bit_reg_info->access_bit_mask,
 386                                            value);
 387
 388                 status = acpi_hw_register_write(ACPI_MTX_DO_NOT_LOCK,
 389                                                 ACPI_REGISTER_PM1_ENABLE,
 390                                                 (u16) register_value);
 391                 break;
 392
 393         case ACPI_REGISTER_PM1_CONTROL:
 394
 395                 /*
 396                  * Write the PM1 Control register.
 397                  * Note that at this level, the fact that there are actually TWO
 398                  * registers (A and B - and B may not exist) is abstracted.
 399                  */
 400                 ACPI_DEBUG_PRINT((ACPI_DB_IO, "PM1 control: Read %X\n",
 401                                   register_value));
 402
 403                 ACPI_REGISTER_INSERT_VALUE(register_value,
 404                                            bit_reg_info->bit_position,
 405                                            bit_reg_info->access_bit_mask,
 406                                            value);
 407
 408                 status = acpi_hw_register_write(ACPI_MTX_DO_NOT_LOCK,
 409                                                 ACPI_REGISTER_PM1_CONTROL,
 410                                                 (u16) register_value);
 411                 break;
 412
 413         case ACPI_REGISTER_PM2_CONTROL:
 414
 415                 status = acpi_hw_register_read(ACPI_MTX_DO_NOT_LOCK,
 416                                                ACPI_REGISTER_PM2_CONTROL,
 417                                                &register_value);
 418                 if (ACPI_FAILURE(status)) {
 419                         goto unlock_and_exit;
 420                 }
 421
 422                 ACPI_DEBUG_PRINT((ACPI_DB_IO,
 423                                   "PM2 control: Read %X from %8.8X%8.8X\n",
 424                                   register_value,
 425                                   ACPI_FORMAT_UINT64(acpi_gbl_FADT->
 426                                                      xpm2_cnt_blk.address)));
 427
 428                 ACPI_REGISTER_INSERT_VALUE(register_value,
 429                                            bit_reg_info->bit_position,
 430                                            bit_reg_info->access_bit_mask,
 431                                            value);
 432
 433                 ACPI_DEBUG_PRINT((ACPI_DB_IO,
 434                                   "About to write %4.4X to %8.8X%8.8X\n",
 435                                   register_value,
 436                                   ACPI_FORMAT_UINT64(acpi_gbl_FADT->
 437                                                      xpm2_cnt_blk.address)));
 438
 439                 status = acpi_hw_register_write(ACPI_MTX_DO_NOT_LOCK,
 440                                                 ACPI_REGISTER_PM2_CONTROL,
 441                                                 (u8) (register_value));
 442                 break;
 443
 444         default:
 445                 break;
 446         }
 447
 448       unlock_and_exit:
 449
 450         acpi_os_release_lock(acpi_gbl_hardware_lock, lock_flags);
 451
 452         /* Normalize the value that was read */
 453
 454         ACPI_DEBUG_EXEC(register_value =
 455                         ((register_value & bit_reg_info->access_bit_mask) >>
 456                          bit_reg_info->bit_position));
 457
 458         ACPI_DEBUG_PRINT((ACPI_DB_IO,
 459                           "Set bits: %8.8X actual %8.8X register %X\n", value,
 460                           register_value, bit_reg_info->parent_register));
 461         return_ACPI_STATUS(status);
 462 }
 463
 464 ACPI_EXPORT_SYMBOL(acpi_set_register)
 465
 466 /******************************************************************************
 467  *
 468  * FUNCTION:    acpi_hw_register_read
 469  *
 470  * PARAMETERS:  use_lock            - Mutex hw access
 471  *              register_id         - register_iD + Offset
 472  *              return_value        - Where the register value is returned
 473  *
 474  * RETURN:      Status and the value read.
 475  *
 476  * DESCRIPTION: Acpi register read function.  Registers are read at the
 477  *              given offset.
 478  *
 479  ******************************************************************************/
 480 acpi_status
 481 acpi_hw_register_read(u8 use_lock, u32 register_id, u32 * return_value)
 482 {
 483         u32 value1 = 0;
 484         u32 value2 = 0;
 485         acpi_status status;
 486         acpi_cpu_flags lock_flags = 0;
 487
 488         ACPI_FUNCTION_TRACE(hw_register_read);
 489
 490         if (ACPI_MTX_LOCK == use_lock) {
 491                 lock_flags = acpi_os_acquire_lock(acpi_gbl_hardware_lock);
 492         }
 493
 494         switch (register_id) {
 495         case ACPI_REGISTER_PM1_STATUS:  /* 16-bit access */
 496
 497                 status =
 498                     acpi_hw_low_level_read(16, &value1,
 499                                            &acpi_gbl_FADT->xpm1a_evt_blk);
 500                 if (ACPI_FAILURE(status)) {
 501                         goto unlock_and_exit;
 502                 }
 503
 504                 /* PM1B is optional */
 505
 506                 status =
 507                     acpi_hw_low_level_read(16, &value2,
 508                                            &acpi_gbl_FADT->xpm1b_evt_blk);
 509                 value1 |= value2;
 510                 break;
 511
 512         case ACPI_REGISTER_PM1_ENABLE:  /* 16-bit access */
 513
 514                 status =
 515                     acpi_hw_low_level_read(16, &value1, &acpi_gbl_xpm1a_enable);
 516                 if (ACPI_FAILURE(status)) {
 517                         goto unlock_and_exit;
 518                 }
 519
 520                 /* PM1B is optional */
 521
 522                 status =
 523                     acpi_hw_low_level_read(16, &value2, &acpi_gbl_xpm1b_enable);
 524                 value1 |= value2;
 525                 break;
 526
 527         case ACPI_REGISTER_PM1_CONTROL: /* 16-bit access */
 528
 529                 status =
 530                     acpi_hw_low_level_read(16, &value1,
 531                                            &acpi_gbl_FADT->xpm1a_cnt_blk);
 532                 if (ACPI_FAILURE(status)) {
 533                         goto unlock_and_exit;
 534                 }
 535
 536                 status =
 537                     acpi_hw_low_level_read(16, &value2,
 538                                            &acpi_gbl_FADT->xpm1b_cnt_blk);
 539                 value1 |= value2;
 540                 break;
 541
 542         case ACPI_REGISTER_PM2_CONTROL: /* 8-bit access */
 543
 544                 status =
 545                     acpi_hw_low_level_read(8, &value1,
 546                                            &acpi_gbl_FADT->xpm2_cnt_blk);
 547                 break;
 548
 549         case ACPI_REGISTER_PM_TIMER:    /* 32-bit access */
 550
 551                 status =
 552                     acpi_hw_low_level_read(32, &value1,
 553                                            &acpi_gbl_FADT->xpm_tmr_blk);
 554                 break;
 555
 556         case ACPI_REGISTER_SMI_COMMAND_BLOCK:   /* 8-bit access */
 557
 558                 status = acpi_os_read_port(acpi_gbl_FADT->smi_cmd, &value1, 8);
 559                 break;
 560
 561         default:
 562                 ACPI_ERROR((AE_INFO, "Unknown Register ID: %X", register_id));
 563                 status = AE_BAD_PARAMETER;
 564                 break;
 565         }
 566
 567       unlock_and_exit:
 568         if (ACPI_MTX_LOCK == use_lock) {
 569                 acpi_os_release_lock(acpi_gbl_hardware_lock, lock_flags);
 570         }
 571
 572         if (ACPI_SUCCESS(status)) {
 573                 *return_value = value1;
 574         }
 575
 576         return_ACPI_STATUS(status);
 577 }
 578
 579 /******************************************************************************
 580  *
 581  * FUNCTION:    acpi_hw_register_write
 582  *
 583  * PARAMETERS:  use_lock            - Mutex hw access
 584  *              register_id         - register_iD + Offset
 585  *              Value               - The value to write
 586  *
 587  * RETURN:      Status
 588  *
 589  * DESCRIPTION: Acpi register Write function.  Registers are written at the
 590  *              given offset.
 591  *
 592  ******************************************************************************/
 593
 594 acpi_status acpi_hw_register_write(u8 use_lock, u32 register_id, u32 value)
 595 {
 596         acpi_status status;
 597         acpi_cpu_flags lock_flags = 0;
 598
 599         ACPI_FUNCTION_TRACE(hw_register_write);
 600
 601         if (ACPI_MTX_LOCK == use_lock) {
 602                 lock_flags = acpi_os_acquire_lock(acpi_gbl_hardware_lock);
 603         }
 604
 605         switch (register_id) {
 606         case ACPI_REGISTER_PM1_STATUS:  /* 16-bit access */
 607
 608                 status =
 609                     acpi_hw_low_level_write(16, value,
 610                                             &acpi_gbl_FADT->xpm1a_evt_blk);
 611                 if (ACPI_FAILURE(status)) {
 612                         goto unlock_and_exit;
 613                 }
 614
 615                 /* PM1B is optional */
 616
 617                 status =
 618                     acpi_hw_low_level_write(16, value,
 619                                             &acpi_gbl_FADT->xpm1b_evt_blk);
 620                 break;
 621
 622         case ACPI_REGISTER_PM1_ENABLE:  /* 16-bit access */
 623
 624                 status =
 625                     acpi_hw_low_level_write(16, value, &acpi_gbl_xpm1a_enable);
 626                 if (ACPI_FAILURE(status)) {
 627                         goto unlock_and_exit;
 628                 }
 629
 630                 /* PM1B is optional */
 631
 632                 status =
 633                     acpi_hw_low_level_write(16, value, &acpi_gbl_xpm1b_enable);
 634                 break;
 635
 636         case ACPI_REGISTER_PM1_CONTROL: /* 16-bit access */
 637
 638                 status =
 639                     acpi_hw_low_level_write(16, value,
 640                                             &acpi_gbl_FADT->xpm1a_cnt_blk);
 641                 if (ACPI_FAILURE(status)) {
 642                         goto unlock_and_exit;
 643                 }
 644
 645                 status =
 646                     acpi_hw_low_level_write(16, value,
 647                                             &acpi_gbl_FADT->xpm1b_cnt_blk);
 648                 break;
 649
 650         case ACPI_REGISTER_PM1A_CONTROL:        /* 16-bit access */
 651
 652                 status =
 653                     acpi_hw_low_level_write(16, value,
 654                                             &acpi_gbl_FADT->xpm1a_cnt_blk);
 655                 break;
 656
 657         case ACPI_REGISTER_PM1B_CONTROL:        /* 16-bit access */
 658
 659                 status =
 660                     acpi_hw_low_level_write(16, value,
 661                                             &acpi_gbl_FADT->xpm1b_cnt_blk);
 662                 break;
 663
 664         case ACPI_REGISTER_PM2_CONTROL: /* 8-bit access */
 665
 666                 status =
 667                     acpi_hw_low_level_write(8, value,
 668                                             &acpi_gbl_FADT->xpm2_cnt_blk);
 669                 break;
 670
 671         case ACPI_REGISTER_PM_TIMER:    /* 32-bit access */
 672
 673                 status =
 674                     acpi_hw_low_level_write(32, value,
 675                                             &acpi_gbl_FADT->xpm_tmr_blk);
 676                 break;
 677
 678         case ACPI_REGISTER_SMI_COMMAND_BLOCK:   /* 8-bit access */
 679
 680                 /* SMI_CMD is currently always in IO space */
 681
 682                 status = acpi_os_write_port(acpi_gbl_FADT->smi_cmd, value, 8);
 683                 break;
 684
 685         default:
 686                 status = AE_BAD_PARAMETER;
 687                 break;
 688         }
 689
 690       unlock_and_exit:
 691         if (ACPI_MTX_LOCK == use_lock) {
 692                 acpi_os_release_lock(acpi_gbl_hardware_lock, lock_flags);
 693         }
 694
 695         return_ACPI_STATUS(status);
 696 }
 697
 698 /******************************************************************************
 699  *
 700  * FUNCTION:    acpi_hw_low_level_read
 701  *
 702  * PARAMETERS:  Width               - 8, 16, or 32
 703  *              Value               - Where the value is returned
 704  *              Reg                 - GAS register structure
 705  *
 706  * RETURN:      Status
 707  *
 708  * DESCRIPTION: Read from either memory or IO space.
 709  *
 710  ******************************************************************************/
 711
 712 acpi_status
 713 acpi_hw_low_level_read(u32 width, u32 * value, struct acpi_generic_address *reg)
 714 {
 715         u64 address;
 716         acpi_status status;
 717
 718         ACPI_FUNCTION_NAME(hw_low_level_read);
 719
 720         /*
 721          * Must have a valid pointer to a GAS structure, and
 722          * a non-zero address within. However, don't return an error
 723          * because the PM1A/B code must not fail if B isn't present.
 724          */
 725         if (!reg) {
 726                 return (AE_OK);
 727         }
 728
 729         /* Get a local copy of the address.  Handles possible alignment issues */
 730
 731         ACPI_MOVE_64_TO_64(&address, &reg->address);
 732         if (!address) {
 733                 return (AE_OK);
 734         }
 735         *value = 0;
 736
 737         /*
 738          * Two address spaces supported: Memory or IO.
 739          * PCI_Config is not supported here because the GAS struct is insufficient
 740          */
 741         switch (reg->address_space_id) {
 742         case ACPI_ADR_SPACE_SYSTEM_MEMORY:
 743
 744                 status = acpi_os_read_memory((acpi_physical_address) address,
 745                                              value, width);
 746                 break;
 747
 748         case ACPI_ADR_SPACE_SYSTEM_IO:
 749
 750                 status = acpi_os_read_port((acpi_io_address) address,
 751                                            value, width);
 752                 break;
 753
 754         default:
 755                 ACPI_ERROR((AE_INFO,
 756                             "Unsupported address space: %X",
 757                             reg->address_space_id));
 758                 return (AE_BAD_PARAMETER);
 759         }
 760
 761         ACPI_DEBUG_PRINT((ACPI_DB_IO,
 762                           "Read:  %8.8X width %2d from %8.8X%8.8X (%s)\n",
 763                           *value, width,
 764                           ACPI_FORMAT_UINT64(address),
 765                           acpi_ut_get_region_name(reg->address_space_id)));
 766
 767         return (status);
 768 }
 769
 770 /******************************************************************************
 771  *
 772  * FUNCTION:    acpi_hw_low_level_write
 773  *
 774  * PARAMETERS:  Width               - 8, 16, or 32
 775  *              Value               - To be written
 776  *              Reg                 - GAS register structure
 777  *
 778  * RETURN:      Status
 779  *
 780  * DESCRIPTION: Write to either memory or IO space.
 781  *
 782  ******************************************************************************/
 783
 784 acpi_status
 785 acpi_hw_low_level_write(u32 width, u32 value, struct acpi_generic_address * reg)
 786 {
 787         u64 address;
 788         acpi_status status;
 789
 790         ACPI_FUNCTION_NAME(hw_low_level_write);
 791
 792         /*
 793          * Must have a valid pointer to a GAS structure, and
 794          * a non-zero address within. However, don't return an error
 795          * because the PM1A/B code must not fail if B isn't present.
 796          */
 797         if (!reg) {
 798                 return (AE_OK);
 799         }
 800
 801         /* Get a local copy of the address.  Handles possible alignment issues */
 802
 803         ACPI_MOVE_64_TO_64(&address, &reg->address);
 804         if (!address) {
 805                 return (AE_OK);
 806         }
 807
 808         /*
 809          * Two address spaces supported: Memory or IO.
 810          * PCI_Config is not supported here because the GAS struct is insufficient
 811          */
 812         switch (reg->address_space_id) {
 813         case ACPI_ADR_SPACE_SYSTEM_MEMORY:
 814
 815                 status = acpi_os_write_memory((acpi_physical_address) address,
 816                                               value, width);
 817                 break;
 818
 819         case ACPI_ADR_SPACE_SYSTEM_IO:
 820
 821                 status = acpi_os_write_port((acpi_io_address) address,
 822                                             value, width);
 823                 break;
 824
 825         default:
 826                 ACPI_ERROR((AE_INFO,
 827                             "Unsupported address space: %X",
 828                             reg->address_space_id));
 829                 return (AE_BAD_PARAMETER);
 830         }
 831
 832         ACPI_DEBUG_PRINT((ACPI_DB_IO,
 833                           "Wrote: %8.8X width %2d   to %8.8X%8.8X (%s)\n",
 834                           value, width,
 835                           ACPI_FORMAT_UINT64(address),
 836                           acpi_ut_get_region_name(reg->address_space_id)));
 837
 838         return (status);
 839 }