drivers/acpi/acpica/utcopy.c

   1 /******************************************************************************
   2  *
   3  * Module Name: utcopy - Internal to external object translation utilities
   4  *
   5  *****************************************************************************/
   6
   7 /*
   8  * Copyright (C) 2000 - 2011, Intel Corp.
   9  * All rights reserved.
  10  *
  11  * Redistribution and use in source and binary forms, with or without
  12  * modification, are permitted provided that the following conditions
  13  * are met:
  14  * 1. Redistributions of source code must retain the above copyright
  15  *    notice, this list of conditions, and the following disclaimer,
  16  *    without modification.
  17  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
  18  *    substantially similar to the "NO WARRANTY" disclaimer below
  19  *    ("Disclaimer") and any redistribution must be conditioned upon
  20  *    including a substantially similar Disclaimer requirement for further
  21  *    binary redistribution.
  22  * 3. Neither the names of the above-listed copyright holders nor the names
  23  *    of any contributors may be used to endorse or promote products derived
  24  *    from this software without specific prior written permission.
  25  *
  26  * Alternatively, this software may be distributed under the terms of the
  27  * GNU General Public License ("GPL") version 2 as published by the Free
  28  * Software Foundation.
  29  *
  30  * NO WARRANTY
  31  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  32  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  33  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
  34  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  35  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  36  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  37  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  38  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
  39  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
  40  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  41  * POSSIBILITY OF SUCH DAMAGES.
  42  */
  43
  44 #include <acpi/acpi.h>
  45 #include "accommon.h"
  46 #include "acnamesp.h"
  47
  48
  49 #define _COMPONENT          ACPI_UTILITIES
  50 ACPI_MODULE_NAME("utcopy")
  51
  52 /* Local prototypes */
  53 static acpi_status
  54 acpi_ut_copy_isimple_to_esimple(union acpi_operand_object *internal_object,
  55                                 union acpi_object *external_object,
  56                                 u8 * data_space, acpi_size * buffer_space_used);
  57
  58 static acpi_status
  59 acpi_ut_copy_ielement_to_ielement(u8 object_type,
  60                                   union acpi_operand_object *source_object,
  61                                   union acpi_generic_state *state,
  62                                   void *context);
  63
  64 static acpi_status
  65 acpi_ut_copy_ipackage_to_epackage(union acpi_operand_object *internal_object,
  66                                   u8 * buffer, acpi_size * space_used);
  67
  68 static acpi_status
  69 acpi_ut_copy_esimple_to_isimple(union acpi_object *user_obj,
  70                                 union acpi_operand_object **return_obj);
  71
  72 static acpi_status
  73 acpi_ut_copy_epackage_to_ipackage(union acpi_object *external_object,
  74                                   union acpi_operand_object **internal_object);
  75
  76 static acpi_status
  77 acpi_ut_copy_simple_object(union acpi_operand_object *source_desc,
  78                            union acpi_operand_object *dest_desc);
  79
  80 static acpi_status
  81 acpi_ut_copy_ielement_to_eelement(u8 object_type,
  82                                   union acpi_operand_object *source_object,
  83                                   union acpi_generic_state *state,
  84                                   void *context);
  85
  86 static acpi_status
  87 acpi_ut_copy_ipackage_to_ipackage(union acpi_operand_object *source_obj,
  88                                   union acpi_operand_object *dest_obj,
  89                                   struct acpi_walk_state *walk_state);
  90
  91 /*******************************************************************************
  92  *
  93  * FUNCTION:    acpi_ut_copy_isimple_to_esimple
  94  *
  95  * PARAMETERS:  internal_object     - Source object to be copied
  96  *              external_object     - Where to return the copied object
  97  *              data_space          - Where object data is returned (such as
  98  *                                    buffer and string data)
  99  *              buffer_space_used   - Length of data_space that was used
 100  *
 101  * RETURN:      Status
 102  *
 103  * DESCRIPTION: This function is called to copy a simple internal object to
 104  *              an external object.
 105  *
 106  *              The data_space buffer is assumed to have sufficient space for
 107  *              the object.
 108  *
 109  ******************************************************************************/
 110
 111 static acpi_status
 112 acpi_ut_copy_isimple_to_esimple(union acpi_operand_object *internal_object,
 113                                 union acpi_object *external_object,
 114                                 u8 * data_space, acpi_size * buffer_space_used)
 115 {
 116         acpi_status status = AE_OK;
 117
 118         ACPI_FUNCTION_TRACE(ut_copy_isimple_to_esimple);
 119
 120         *buffer_space_used = 0;
 121
 122         /*
 123          * Check for NULL object case (could be an uninitialized
 124          * package element)
 125          */
 126         if (!internal_object) {
 127                 return_ACPI_STATUS(AE_OK);
 128         }
 129
 130         /* Always clear the external object */
 131
 132         ACPI_MEMSET(external_object, 0, sizeof(union acpi_object));
 133
 134         /*
 135          * In general, the external object will be the same type as
 136          * the internal object
 137          */
 138         external_object->type = internal_object->common.type;
 139
 140         /* However, only a limited number of external types are supported */
 141
 142         switch (internal_object->common.type) {
 143         case ACPI_TYPE_STRING:
 144
 145                 external_object->string.pointer = (char *)data_space;
 146                 external_object->string.length = internal_object->string.length;
 147                 *buffer_space_used = ACPI_ROUND_UP_TO_NATIVE_WORD((acpi_size)
 148                                                                   internal_object->
 149                                                                   string.
 150                                                                   length + 1);
 151
 152                 ACPI_MEMCPY((void *)data_space,
 153                             (void *)internal_object->string.pointer,
 154                             (acpi_size) internal_object->string.length + 1);
 155                 break;
 156
 157         case ACPI_TYPE_BUFFER:
 158
 159                 external_object->buffer.pointer = data_space;
 160                 external_object->buffer.length = internal_object->buffer.length;
 161                 *buffer_space_used =
 162                     ACPI_ROUND_UP_TO_NATIVE_WORD(internal_object->string.
 163                                                  length);
 164
 165                 ACPI_MEMCPY((void *)data_space,
 166                             (void *)internal_object->buffer.pointer,
 167                             internal_object->buffer.length);
 168                 break;
 169
 170         case ACPI_TYPE_INTEGER:
 171
 172                 external_object->integer.value = internal_object->integer.value;
 173                 break;
 174
 175         case ACPI_TYPE_LOCAL_REFERENCE:
 176
 177                 /* This is an object reference. */
 178
 179                 switch (internal_object->reference.class) {
 180                 case ACPI_REFCLASS_NAME:
 181
 182                         /*
 183                          * For namepath, return the object handle ("reference")
 184                          * We are referring to the namespace node
 185                          */
 186                         external_object->reference.handle =
 187                             internal_object->reference.node;
 188                         external_object->reference.actual_type =
 189                             acpi_ns_get_type(internal_object->reference.node);
 190                         break;
 191
 192                 default:
 193
 194                         /* All other reference types are unsupported */
 195
 196                         return_ACPI_STATUS(AE_TYPE);
 197                 }
 198                 break;
 199
 200         case ACPI_TYPE_PROCESSOR:
 201
 202                 external_object->processor.proc_id =
 203                     internal_object->processor.proc_id;
 204                 external_object->processor.pblk_address =
 205                     internal_object->processor.address;
 206                 external_object->processor.pblk_length =
 207                     internal_object->processor.length;
 208                 break;
 209
 210         case ACPI_TYPE_POWER:
 211
 212                 external_object->power_resource.system_level =
 213                     internal_object->power_resource.system_level;
 214
 215                 external_object->power_resource.resource_order =
 216                     internal_object->power_resource.resource_order;
 217                 break;
 218
 219         default:
 220                 /*
 221                  * There is no corresponding external object type
 222                  */
 223                 ACPI_ERROR((AE_INFO,
 224                             "Unsupported object type, cannot convert to external object: %s",
 225                             acpi_ut_get_type_name(internal_object->common.
 226                                                   type)));
 227
 228                 return_ACPI_STATUS(AE_SUPPORT);
 229         }
 230
 231         return_ACPI_STATUS(status);
 232 }
 233
 234 /*******************************************************************************
 235  *
 236  * FUNCTION:    acpi_ut_copy_ielement_to_eelement
 237  *
 238  * PARAMETERS:  acpi_pkg_callback
 239  *
 240  * RETURN:      Status
 241  *
 242  * DESCRIPTION: Copy one package element to another package element
 243  *
 244  ******************************************************************************/
 245
 246 static acpi_status
 247 acpi_ut_copy_ielement_to_eelement(u8 object_type,
 248                                   union acpi_operand_object *source_object,
 249                                   union acpi_generic_state *state,
 250                                   void *context)
 251 {
 252         acpi_status status = AE_OK;
 253         struct acpi_pkg_info *info = (struct acpi_pkg_info *)context;
 254         acpi_size object_space;
 255         u32 this_index;
 256         union acpi_object *target_object;
 257
 258         ACPI_FUNCTION_ENTRY();
 259
 260         this_index = state->pkg.index;
 261         target_object = (union acpi_object *)
 262             &((union acpi_object *)(state->pkg.dest_object))->package.
 263             elements[this_index];
 264
 265         switch (object_type) {
 266         case ACPI_COPY_TYPE_SIMPLE:
 267
 268                 /*
 269                  * This is a simple or null object
 270                  */
 271                 status = acpi_ut_copy_isimple_to_esimple(source_object,
 272                                                          target_object,
 273                                                          info->free_space,
 274                                                          &object_space);
 275                 if (ACPI_FAILURE(status)) {
 276                         return (status);
 277                 }
 278                 break;
 279
 280         case ACPI_COPY_TYPE_PACKAGE:
 281
 282                 /*
 283                  * Build the package object
 284                  */
 285                 target_object->type = ACPI_TYPE_PACKAGE;
 286                 target_object->package.count = source_object->package.count;
 287                 target_object->package.elements =
 288                     ACPI_CAST_PTR(union acpi_object, info->free_space);
 289
 290                 /*
 291                  * Pass the new package object back to the package walk routine
 292                  */
 293                 state->pkg.this_target_obj = target_object;
 294
 295                 /*
 296                  * Save space for the array of objects (Package elements)
 297                  * update the buffer length counter
 298                  */
 299                 object_space = ACPI_ROUND_UP_TO_NATIVE_WORD((acpi_size)
 300                                                             target_object->
 301                                                             package.count *
 302                                                             sizeof(union
 303                                                                    acpi_object));
 304                 break;
 305
 306         default:
 307                 return (AE_BAD_PARAMETER);
 308         }
 309
 310         info->free_space += object_space;
 311         info->length += object_space;
 312         return (status);
 313 }
 314
 315 /*******************************************************************************
 316  *
 317  * FUNCTION:    acpi_ut_copy_ipackage_to_epackage
 318  *
 319  * PARAMETERS:  internal_object     - Pointer to the object we are returning
 320  *              Buffer              - Where the object is returned
 321  *              space_used          - Where the object length is returned
 322  *
 323  * RETURN:      Status
 324  *
 325  * DESCRIPTION: This function is called to place a package object in a user
 326  *              buffer. A package object by definition contains other objects.
 327  *
 328  *              The buffer is assumed to have sufficient space for the object.
 329  *              The caller must have verified the buffer length needed using
 330  *              the acpi_ut_get_object_size function before calling this function.
 331  *
 332  ******************************************************************************/
 333
 334 static acpi_status
 335 acpi_ut_copy_ipackage_to_epackage(union acpi_operand_object *internal_object,
 336                                   u8 * buffer, acpi_size * space_used)
 337 {
 338         union acpi_object *external_object;
 339         acpi_status status;
 340         struct acpi_pkg_info info;
 341
 342         ACPI_FUNCTION_TRACE(ut_copy_ipackage_to_epackage);
 343
 344         /*
 345          * First package at head of the buffer
 346          */
 347         external_object = ACPI_CAST_PTR(union acpi_object, buffer);
 348
 349         /*
 350          * Free space begins right after the first package
 351          */
 352         info.length = ACPI_ROUND_UP_TO_NATIVE_WORD(sizeof(union acpi_object));
 353         info.free_space =
 354             buffer + ACPI_ROUND_UP_TO_NATIVE_WORD(sizeof(union acpi_object));
 355         info.object_space = 0;
 356         info.num_packages = 1;
 357
 358         external_object->type = internal_object->common.type;
 359         external_object->package.count = internal_object->package.count;
 360         external_object->package.elements = ACPI_CAST_PTR(union acpi_object,
 361                                                           info.free_space);
 362
 363         /*
 364          * Leave room for an array of ACPI_OBJECTS in the buffer
 365          * and move the free space past it
 366          */
 367         info.length += (acpi_size) external_object->package.count *
 368             ACPI_ROUND_UP_TO_NATIVE_WORD(sizeof(union acpi_object));
 369         info.free_space += external_object->package.count *
 370             ACPI_ROUND_UP_TO_NATIVE_WORD(sizeof(union acpi_object));
 371
 372         status = acpi_ut_walk_package_tree(internal_object, external_object,
 373                                            acpi_ut_copy_ielement_to_eelement,
 374                                            &info);
 375
 376         *space_used = info.length;
 377         return_ACPI_STATUS(status);
 378 }
 379
 380 /*******************************************************************************
 381  *
 382  * FUNCTION:    acpi_ut_copy_iobject_to_eobject
 383  *
 384  * PARAMETERS:  internal_object     - The internal object to be converted
 385  *              ret_buffer          - Where the object is returned
 386  *
 387  * RETURN:      Status
 388  *
 389  * DESCRIPTION: This function is called to build an API object to be returned
 390  *              to the caller.
 391  *
 392  ******************************************************************************/
 393
 394 acpi_status
 395 acpi_ut_copy_iobject_to_eobject(union acpi_operand_object *internal_object,
 396                                 struct acpi_buffer *ret_buffer)
 397 {
 398         acpi_status status;
 399
 400         ACPI_FUNCTION_TRACE(ut_copy_iobject_to_eobject);
 401
 402         if (internal_object->common.type == ACPI_TYPE_PACKAGE) {
 403                 /*
 404                  * Package object:  Copy all subobjects (including
 405                  * nested packages)
 406                  */
 407                 status = acpi_ut_copy_ipackage_to_epackage(internal_object,
 408                                                            ret_buffer->pointer,
 409                                                            &ret_buffer->length);
 410         } else {
 411                 /*
 412                  * Build a simple object (no nested objects)
 413                  */
 414                 status = acpi_ut_copy_isimple_to_esimple(internal_object,
 415                                                          ACPI_CAST_PTR(union
 416                                                                        acpi_object,
 417                                                                        ret_buffer->
 418                                                                        pointer),
 419                                                          ACPI_ADD_PTR(u8,
 420                                                                       ret_buffer->
 421                                                                       pointer,
 422                                                                       ACPI_ROUND_UP_TO_NATIVE_WORD
 423                                                                       (sizeof
 424                                                                        (union
 425                                                                         acpi_object))),
 426                                                          &ret_buffer->length);
 427                 /*
 428                  * build simple does not include the object size in the length
 429                  * so we add it in here
 430                  */
 431                 ret_buffer->length += sizeof(union acpi_object);
 432         }
 433
 434         return_ACPI_STATUS(status);
 435 }
 436
 437 /*******************************************************************************
 438  *
 439  * FUNCTION:    acpi_ut_copy_esimple_to_isimple
 440  *
 441  * PARAMETERS:  external_object     - The external object to be converted
 442  *              ret_internal_object - Where the internal object is returned
 443  *
 444  * RETURN:      Status
 445  *
 446  * DESCRIPTION: This function copies an external object to an internal one.
 447  *              NOTE: Pointers can be copied, we don't need to copy data.
 448  *              (The pointers have to be valid in our address space no matter
 449  *              what we do with them!)
 450  *
 451  ******************************************************************************/
 452
 453 static acpi_status
 454 acpi_ut_copy_esimple_to_isimple(union acpi_object *external_object,
 455                                 union acpi_operand_object **ret_internal_object)
 456 {
 457         union acpi_operand_object *internal_object;
 458
 459         ACPI_FUNCTION_TRACE(ut_copy_esimple_to_isimple);
 460
 461         /*
 462          * Simple types supported are: String, Buffer, Integer
 463          */
 464         switch (external_object->type) {
 465         case ACPI_TYPE_STRING:
 466         case ACPI_TYPE_BUFFER:
 467         case ACPI_TYPE_INTEGER:
 468         case ACPI_TYPE_LOCAL_REFERENCE:
 469
 470                 internal_object = acpi_ut_create_internal_object((u8)
 471                                                                  external_object->
 472                                                                  type);
 473                 if (!internal_object) {
 474                         return_ACPI_STATUS(AE_NO_MEMORY);
 475                 }
 476                 break;
 477
 478         case ACPI_TYPE_ANY:     /* This is the case for a NULL object */
 479
 480                 *ret_internal_object = NULL;
 481                 return_ACPI_STATUS(AE_OK);
 482
 483         default:
 484                 /* All other types are not supported */
 485
 486                 ACPI_ERROR((AE_INFO,
 487                             "Unsupported object type, cannot convert to internal object: %s",
 488                             acpi_ut_get_type_name(external_object->type)));
 489
 490                 return_ACPI_STATUS(AE_SUPPORT);
 491         }
 492
 493         /* Must COPY string and buffer contents */
 494
 495         switch (external_object->type) {
 496         case ACPI_TYPE_STRING:
 497
 498                 internal_object->string.pointer =
 499                     ACPI_ALLOCATE_ZEROED((acpi_size)
 500                                          external_object->string.length + 1);
 501
 502                 if (!internal_object->string.pointer) {
 503                         goto error_exit;
 504                 }
 505
 506                 ACPI_MEMCPY(internal_object->string.pointer,
 507                             external_object->string.pointer,
 508                             external_object->string.length);
 509
 510                 internal_object->string.length = external_object->string.length;
 511                 break;
 512
 513         case ACPI_TYPE_BUFFER:
 514
 515                 internal_object->buffer.pointer =
 516                     ACPI_ALLOCATE_ZEROED(external_object->buffer.length);
 517                 if (!internal_object->buffer.pointer) {
 518                         goto error_exit;
 519                 }
 520
 521                 ACPI_MEMCPY(internal_object->buffer.pointer,
 522                             external_object->buffer.pointer,
 523                             external_object->buffer.length);
 524
 525                 internal_object->buffer.length = external_object->buffer.length;
 526
 527                 /* Mark buffer data valid */
 528
 529                 internal_object->buffer.flags |= AOPOBJ_DATA_VALID;
 530                 break;
 531
 532         case ACPI_TYPE_INTEGER:
 533
 534                 internal_object->integer.value = external_object->integer.value;
 535                 break;
 536
 537         case ACPI_TYPE_LOCAL_REFERENCE:
 538
 539                 /* TBD: should validate incoming handle */
 540
 541                 internal_object->reference.class = ACPI_REFCLASS_NAME;
 542                 internal_object->reference.node =
 543                     external_object->reference.handle;
 544                 break;
 545
 546         default:
 547                 /* Other types can't get here */
 548                 break;
 549         }
 550
 551         *ret_internal_object = internal_object;
 552         return_ACPI_STATUS(AE_OK);
 553
 554       error_exit:
 555         acpi_ut_remove_reference(internal_object);
 556         return_ACPI_STATUS(AE_NO_MEMORY);
 557 }
 558
 559 /*******************************************************************************
 560  *
 561  * FUNCTION:    acpi_ut_copy_epackage_to_ipackage
 562  *
 563  * PARAMETERS:  external_object     - The external object to be converted
 564  *              internal_object     - Where the internal object is returned
 565  *
 566  * RETURN:      Status
 567  *
 568  * DESCRIPTION: Copy an external package object to an internal package.
 569  *              Handles nested packages.
 570  *
 571  ******************************************************************************/
 572
 573 static acpi_status
 574 acpi_ut_copy_epackage_to_ipackage(union acpi_object *external_object,
 575                                   union acpi_operand_object **internal_object)
 576 {
 577         acpi_status status = AE_OK;
 578         union acpi_operand_object *package_object;
 579         union acpi_operand_object **package_elements;
 580         u32 i;
 581
 582         ACPI_FUNCTION_TRACE(ut_copy_epackage_to_ipackage);
 583
 584         /* Create the package object */
 585
 586         package_object =
 587             acpi_ut_create_package_object(external_object->package.count);
 588         if (!package_object) {
 589                 return_ACPI_STATUS(AE_NO_MEMORY);
 590         }
 591
 592         package_elements = package_object->package.elements;
 593
 594         /*
 595          * Recursive implementation. Probably ok, since nested external packages
 596          * as parameters should be very rare.
 597          */
 598         for (i = 0; i < external_object->package.count; i++) {
 599                 status =
 600                     acpi_ut_copy_eobject_to_iobject(&external_object->package.
 601                                                     elements[i],
 602                                                     &package_elements[i]);
 603                 if (ACPI_FAILURE(status)) {
 604
 605                         /* Truncate package and delete it */
 606
 607                         package_object->package.count = i;
 608                         package_elements[i] = NULL;
 609                         acpi_ut_remove_reference(package_object);
 610                         return_ACPI_STATUS(status);
 611                 }
 612         }
 613
 614         /* Mark package data valid */
 615
 616         package_object->package.flags |= AOPOBJ_DATA_VALID;
 617
 618         *internal_object = package_object;
 619         return_ACPI_STATUS(status);
 620 }
 621
 622 /*******************************************************************************
 623  *
 624  * FUNCTION:    acpi_ut_copy_eobject_to_iobject
 625  *
 626  * PARAMETERS:  external_object     - The external object to be converted
 627  *              internal_object     - Where the internal object is returned
 628  *
 629  * RETURN:      Status
 630  *
 631  * DESCRIPTION: Converts an external object to an internal object.
 632  *
 633  ******************************************************************************/
 634
 635 acpi_status
 636 acpi_ut_copy_eobject_to_iobject(union acpi_object *external_object,
 637                                 union acpi_operand_object **internal_object)
 638 {
 639         acpi_status status;
 640
 641         ACPI_FUNCTION_TRACE(ut_copy_eobject_to_iobject);
 642
 643         if (external_object->type == ACPI_TYPE_PACKAGE) {
 644                 status =
 645                     acpi_ut_copy_epackage_to_ipackage(external_object,
 646                                                       internal_object);
 647         } else {
 648                 /*
 649                  * Build a simple object (no nested objects)
 650                  */
 651                 status =
 652                     acpi_ut_copy_esimple_to_isimple(external_object,
 653                                                     internal_object);
 654         }
 655
 656         return_ACPI_STATUS(status);
 657 }
 658
 659 /*******************************************************************************
 660  *
 661  * FUNCTION:    acpi_ut_copy_simple_object
 662  *
 663  * PARAMETERS:  source_desc         - The internal object to be copied
 664  *              dest_desc           - New target object
 665  *
 666  * RETURN:      Status
 667  *
 668  * DESCRIPTION: Simple copy of one internal object to another. Reference count
 669  *              of the destination object is preserved.
 670  *
 671  ******************************************************************************/
 672
 673 static acpi_status
 674 acpi_ut_copy_simple_object(union acpi_operand_object *source_desc,
 675                            union acpi_operand_object *dest_desc)
 676 {
 677         u16 reference_count;
 678         union acpi_operand_object *next_object;
 679         acpi_status status;
 680         acpi_size copy_size;
 681
 682         /* Save fields from destination that we don't want to overwrite */
 683
 684         reference_count = dest_desc->common.reference_count;
 685         next_object = dest_desc->common.next_object;
 686
 687         /*
 688          * Copy the entire source object over the destination object.
 689          * Note: Source can be either an operand object or namespace node.
 690          */
 691         copy_size = sizeof(union acpi_operand_object);
 692         if (ACPI_GET_DESCRIPTOR_TYPE(source_desc) == ACPI_DESC_TYPE_NAMED) {
 693                 copy_size = sizeof(struct acpi_namespace_node);
 694         }
 695
 696         ACPI_MEMCPY(ACPI_CAST_PTR(char, dest_desc),
 697                     ACPI_CAST_PTR(char, source_desc), copy_size);
 698
 699         /* Restore the saved fields */
 700
 701         dest_desc->common.reference_count = reference_count;
 702         dest_desc->common.next_object = next_object;
 703
 704         /* New object is not static, regardless of source */
 705
 706         dest_desc->common.flags &= ~AOPOBJ_STATIC_POINTER;
 707
 708         /* Handle the objects with extra data */
 709
 710         switch (dest_desc->common.type) {
 711         case ACPI_TYPE_BUFFER:
 712                 /*
 713                  * Allocate and copy the actual buffer if and only if:
 714                  * 1) There is a valid buffer pointer
 715                  * 2) The buffer has a length > 0
 716                  */
 717                 if ((source_desc->buffer.pointer) &&
 718                     (source_desc->buffer.length)) {
 719                         dest_desc->buffer.pointer =
 720                             ACPI_ALLOCATE(source_desc->buffer.length);
 721                         if (!dest_desc->buffer.pointer) {
 722                                 return (AE_NO_MEMORY);
 723                         }
 724
 725                         /* Copy the actual buffer data */
 726
 727                         ACPI_MEMCPY(dest_desc->buffer.pointer,
 728                                     source_desc->buffer.pointer,
 729                                     source_desc->buffer.length);
 730                 }
 731                 break;
 732
 733         case ACPI_TYPE_STRING:
 734                 /*
 735                  * Allocate and copy the actual string if and only if:
 736                  * 1) There is a valid string pointer
 737                  * (Pointer to a NULL string is allowed)
 738                  */
 739                 if (source_desc->string.pointer) {
 740                         dest_desc->string.pointer =
 741                             ACPI_ALLOCATE((acpi_size) source_desc->string.
 742                                           length + 1);
 743                         if (!dest_desc->string.pointer) {
 744                                 return (AE_NO_MEMORY);
 745                         }
 746
 747                         /* Copy the actual string data */
 748
 749                         ACPI_MEMCPY(dest_desc->string.pointer,
 750                                     source_desc->string.pointer,
 751                                     (acpi_size) source_desc->string.length + 1);
 752                 }
 753                 break;
 754
 755         case ACPI_TYPE_LOCAL_REFERENCE:
 756                 /*
 757                  * We copied the reference object, so we now must add a reference
 758                  * to the object pointed to by the reference
 759                  *
 760                  * DDBHandle reference (from Load/load_table) is a special reference,
 761                  * it does not have a Reference.Object, so does not need to
 762                  * increase the reference count
 763                  */
 764                 if (source_desc->reference.class == ACPI_REFCLASS_TABLE) {
 765                         break;
 766                 }
 767
 768                 acpi_ut_add_reference(source_desc->reference.object);
 769                 break;
 770
 771         case ACPI_TYPE_REGION:
 772                 /*
 773                  * We copied the Region Handler, so we now must add a reference
 774                  */
 775                 if (dest_desc->region.handler) {
 776                         acpi_ut_add_reference(dest_desc->region.handler);
 777                 }
 778                 break;
 779
 780                 /*
 781                  * For Mutex and Event objects, we cannot simply copy the underlying
 782                  * OS object. We must create a new one.
 783                  */
 784         case ACPI_TYPE_MUTEX:
 785
 786                 status = acpi_os_create_mutex(&dest_desc->mutex.os_mutex);
 787                 if (ACPI_FAILURE(status)) {
 788                         return status;
 789                 }
 790                 break;
 791
 792         case ACPI_TYPE_EVENT:
 793
 794                 status = acpi_os_create_semaphore(ACPI_NO_UNIT_LIMIT, 0,
 795                                                   &dest_desc->event.
 796                                                   os_semaphore);
 797                 if (ACPI_FAILURE(status)) {
 798                         return status;
 799                 }
 800                 break;
 801
 802         default:
 803                 /* Nothing to do for other simple objects */
 804                 break;
 805         }
 806
 807         return (AE_OK);
 808 }
 809
 810 /*******************************************************************************
 811  *
 812  * FUNCTION:    acpi_ut_copy_ielement_to_ielement
 813  *
 814  * PARAMETERS:  acpi_pkg_callback
 815  *
 816  * RETURN:      Status
 817  *
 818  * DESCRIPTION: Copy one package element to another package element
 819  *
 820  ******************************************************************************/
 821
 822 static acpi_status
 823 acpi_ut_copy_ielement_to_ielement(u8 object_type,
 824                                   union acpi_operand_object *source_object,
 825                                   union acpi_generic_state *state,
 826                                   void *context)
 827 {
 828         acpi_status status = AE_OK;
 829         u32 this_index;
 830         union acpi_operand_object **this_target_ptr;
 831         union acpi_operand_object *target_object;
 832
 833         ACPI_FUNCTION_ENTRY();
 834
 835         this_index = state->pkg.index;
 836         this_target_ptr = (union acpi_operand_object **)
 837             &state->pkg.dest_object->package.elements[this_index];
 838
 839         switch (object_type) {
 840         case ACPI_COPY_TYPE_SIMPLE:
 841
 842                 /* A null source object indicates a (legal) null package element */
 843
 844                 if (source_object) {
 845                         /*
 846                          * This is a simple object, just copy it
 847                          */
 848                         target_object =
 849                             acpi_ut_create_internal_object(source_object->
 850                                                            common.type);
 851                         if (!target_object) {
 852                                 return (AE_NO_MEMORY);
 853                         }
 854
 855                         status =
 856                             acpi_ut_copy_simple_object(source_object,
 857                                                        target_object);
 858                         if (ACPI_FAILURE(status)) {
 859                                 goto error_exit;
 860                         }
 861
 862                         *this_target_ptr = target_object;
 863                 } else {
 864                         /* Pass through a null element */
 865
 866                         *this_target_ptr = NULL;
 867                 }
 868                 break;
 869
 870         case ACPI_COPY_TYPE_PACKAGE:
 871
 872                 /*
 873                  * This object is a package - go down another nesting level
 874                  * Create and build the package object
 875                  */
 876                 target_object =
 877                     acpi_ut_create_package_object(source_object->package.count);
 878                 if (!target_object) {
 879                         return (AE_NO_MEMORY);
 880                 }
 881
 882                 target_object->common.flags = source_object->common.flags;
 883
 884                 /* Pass the new package object back to the package walk routine */
 885
 886                 state->pkg.this_target_obj = target_object;
 887
 888                 /* Store the object pointer in the parent package object */
 889
 890                 *this_target_ptr = target_object;
 891                 break;
 892
 893         default:
 894                 return (AE_BAD_PARAMETER);
 895         }
 896
 897         return (status);
 898
 899       error_exit:
 900         acpi_ut_remove_reference(target_object);
 901         return (status);
 902 }
 903
 904 /*******************************************************************************
 905  *
 906  * FUNCTION:    acpi_ut_copy_ipackage_to_ipackage
 907  *
 908  * PARAMETERS:  source_obj      - Pointer to the source package object
 909  *              dest_obj        - Where the internal object is returned
 910  *              walk_state      - Current Walk state descriptor
 911  *
 912  * RETURN:      Status
 913  *
 914  * DESCRIPTION: This function is called to copy an internal package object
 915  *              into another internal package object.
 916  *
 917  ******************************************************************************/
 918
 919 static acpi_status
 920 acpi_ut_copy_ipackage_to_ipackage(union acpi_operand_object *source_obj,
 921                                   union acpi_operand_object *dest_obj,
 922                                   struct acpi_walk_state *walk_state)
 923 {
 924         acpi_status status = AE_OK;
 925
 926         ACPI_FUNCTION_TRACE(ut_copy_ipackage_to_ipackage);
 927
 928         dest_obj->common.type = source_obj->common.type;
 929         dest_obj->common.flags = source_obj->common.flags;
 930         dest_obj->package.count = source_obj->package.count;
 931
 932         /*
 933          * Create the object array and walk the source package tree
 934          */
 935         dest_obj->package.elements = ACPI_ALLOCATE_ZEROED(((acpi_size)
 936                                                            source_obj->package.
 937                                                            count +
 938                                                            1) * sizeof(void *));
 939         if (!dest_obj->package.elements) {
 940                 ACPI_ERROR((AE_INFO, "Package allocation failure"));
 941                 return_ACPI_STATUS(AE_NO_MEMORY);
 942         }
 943
 944         /*
 945          * Copy the package element-by-element by walking the package "tree".
 946          * This handles nested packages of arbitrary depth.
 947          */
 948         status = acpi_ut_walk_package_tree(source_obj, dest_obj,
 949                                            acpi_ut_copy_ielement_to_ielement,
 950                                            walk_state);
 951         if (ACPI_FAILURE(status)) {
 952
 953                 /* On failure, delete the destination package object */
 954
 955                 acpi_ut_remove_reference(dest_obj);
 956         }
 957
 958         return_ACPI_STATUS(status);
 959 }
 960
 961 /*******************************************************************************
 962  *
 963  * FUNCTION:    acpi_ut_copy_iobject_to_iobject
 964  *
 965  * PARAMETERS:  source_desc         - The internal object to be copied
 966  *              dest_desc           - Where the copied object is returned
 967  *              walk_state          - Current walk state
 968  *
 969  * RETURN:      Status
 970  *
 971  * DESCRIPTION: Copy an internal object to a new internal object
 972  *
 973  ******************************************************************************/
 974
 975 acpi_status
 976 acpi_ut_copy_iobject_to_iobject(union acpi_operand_object *source_desc,
 977                                 union acpi_operand_object **dest_desc,
 978                                 struct acpi_walk_state *walk_state)
 979 {
 980         acpi_status status = AE_OK;
 981
 982         ACPI_FUNCTION_TRACE(ut_copy_iobject_to_iobject);
 983
 984         /* Create the top level object */
 985
 986         *dest_desc = acpi_ut_create_internal_object(source_desc->common.type);
 987         if (!*dest_desc) {
 988                 return_ACPI_STATUS(AE_NO_MEMORY);
 989         }
 990
 991         /* Copy the object and possible subobjects */
 992
 993         if (source_desc->common.type == ACPI_TYPE_PACKAGE) {
 994                 status =
 995                     acpi_ut_copy_ipackage_to_ipackage(source_desc, *dest_desc,
 996                                                       walk_state);
 997         } else {
 998                 status = acpi_ut_copy_simple_object(source_desc, *dest_desc);
 999         }
1000
1001         return_ACPI_STATUS(status);
1002 }