drivers/acpi/acpica/nspredef.c

   1 /******************************************************************************
   2  *
   3  * Module Name: nspredef - Validation of ACPI predefined methods and objects
   4  *              $Revision: 1.1 $
   5  *
   6  *****************************************************************************/
   7
   8 /*
   9  * Copyright (C) 2000 - 2011, Intel Corp.
  10  * All rights reserved.
  11  *
  12  * Redistribution and use in source and binary forms, with or without
  13  * modification, are permitted provided that the following conditions
  14  * are met:
  15  * 1. Redistributions of source code must retain the above copyright
  16  *    notice, this list of conditions, and the following disclaimer,
  17  *    without modification.
  18  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
  19  *    substantially similar to the "NO WARRANTY" disclaimer below
  20  *    ("Disclaimer") and any redistribution must be conditioned upon
  21  *    including a substantially similar Disclaimer requirement for further
  22  *    binary redistribution.
  23  * 3. Neither the names of the above-listed copyright holders nor the names
  24  *    of any contributors may be used to endorse or promote products derived
  25  *    from this software without specific prior written permission.
  26  *
  27  * Alternatively, this software may be distributed under the terms of the
  28  * GNU General Public License ("GPL") version 2 as published by the Free
  29  * Software Foundation.
  30  *
  31  * NO WARRANTY
  32  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  33  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  34  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
  35  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  36  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  37  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  38  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  39  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
  40  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
  41  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  42  * POSSIBILITY OF SUCH DAMAGES.
  43  */
  44
  45 #define ACPI_CREATE_PREDEFINED_TABLE
  46
  47 #include <acpi/acpi.h>
  48 #include "accommon.h"
  49 #include "acnamesp.h"
  50 #include "acpredef.h"
  51
  52 #define _COMPONENT          ACPI_NAMESPACE
  53 ACPI_MODULE_NAME("nspredef")
  54
  55 /*******************************************************************************
  56  *
  57  * This module validates predefined ACPI objects that appear in the namespace,
  58  * at the time they are evaluated (via acpi_evaluate_object). The purpose of this
  59  * validation is to detect problems with BIOS-exposed predefined ACPI objects
  60  * before the results are returned to the ACPI-related drivers.
  61  *
  62  * There are several areas that are validated:
  63  *
  64  *  1) The number of input arguments as defined by the method/object in the
  65  *      ASL is validated against the ACPI specification.
  66  *  2) The type of the return object (if any) is validated against the ACPI
  67  *      specification.
  68  *  3) For returned package objects, the count of package elements is
  69  *      validated, as well as the type of each package element. Nested
  70  *      packages are supported.
  71  *
  72  * For any problems found, a warning message is issued.
  73  *
  74  ******************************************************************************/
  75 /* Local prototypes */
  76 static acpi_status
  77 acpi_ns_check_package(struct acpi_predefined_data *data,
  78                       union acpi_operand_object **return_object_ptr);
  79
  80 static acpi_status
  81 acpi_ns_check_package_list(struct acpi_predefined_data *data,
  82                            const union acpi_predefined_info *package,
  83                            union acpi_operand_object **elements, u32 count);
  84
  85 static acpi_status
  86 acpi_ns_check_package_elements(struct acpi_predefined_data *data,
  87                                union acpi_operand_object **elements,
  88                                u8 type1,
  89                                u32 count1,
  90                                u8 type2, u32 count2, u32 start_index);
  91
  92 static acpi_status
  93 acpi_ns_check_object_type(struct acpi_predefined_data *data,
  94                           union acpi_operand_object **return_object_ptr,
  95                           u32 expected_btypes, u32 package_index);
  96
  97 static acpi_status
  98 acpi_ns_check_reference(struct acpi_predefined_data *data,
  99                         union acpi_operand_object *return_object);
 100
 101 static void acpi_ns_get_expected_types(char *buffer, u32 expected_btypes);
 102
 103 /*
 104  * Names for the types that can be returned by the predefined objects.
 105  * Used for warning messages. Must be in the same order as the ACPI_RTYPEs
 106  */
 107 static const char *acpi_rtype_names[] = {
 108         "/Integer",
 109         "/String",
 110         "/Buffer",
 111         "/Package",
 112         "/Reference",
 113 };
 114
 115 /*******************************************************************************
 116  *
 117  * FUNCTION:    acpi_ns_check_predefined_names
 118  *
 119  * PARAMETERS:  Node            - Namespace node for the method/object
 120  *              user_param_count - Number of parameters actually passed
 121  *              return_status   - Status from the object evaluation
 122  *              return_object_ptr - Pointer to the object returned from the
 123  *                                evaluation of a method or object
 124  *
 125  * RETURN:      Status
 126  *
 127  * DESCRIPTION: Check an ACPI name for a match in the predefined name list.
 128  *
 129  ******************************************************************************/
 130
 131 acpi_status
 132 acpi_ns_check_predefined_names(struct acpi_namespace_node *node,
 133                                u32 user_param_count,
 134                                acpi_status return_status,
 135                                union acpi_operand_object **return_object_ptr)
 136 {
 137         union acpi_operand_object *return_object = *return_object_ptr;
 138         acpi_status status = AE_OK;
 139         const union acpi_predefined_info *predefined;
 140         char *pathname;
 141         struct acpi_predefined_data *data;
 142
 143         /* Match the name for this method/object against the predefined list */
 144
 145         predefined = acpi_ns_check_for_predefined_name(node);
 146
 147         /* Get the full pathname to the object, for use in warning messages */
 148
 149         pathname = acpi_ns_get_external_pathname(node);
 150         if (!pathname) {
 151                 return AE_OK;   /* Could not get pathname, ignore */
 152         }
 153
 154         /*
 155          * Check that the parameter count for this method matches the ASL
 156          * definition. For predefined names, ensure that both the caller and
 157          * the method itself are in accordance with the ACPI specification.
 158          */
 159         acpi_ns_check_parameter_count(pathname, node, user_param_count,
 160                                       predefined);
 161
 162         /* If not a predefined name, we cannot validate the return object */
 163
 164         if (!predefined) {
 165                 goto cleanup;
 166         }
 167
 168         /*
 169          * If the method failed or did not actually return an object, we cannot
 170          * validate the return object
 171          */
 172         if ((return_status != AE_OK) && (return_status != AE_CTRL_RETURN_VALUE)) {
 173                 goto cleanup;
 174         }
 175
 176         /*
 177          * If there is no return value, check if we require a return value for
 178          * this predefined name. Either one return value is expected, or none,
 179          * for both methods and other objects.
 180          *
 181          * Exit now if there is no return object. Warning if one was expected.
 182          */
 183         if (!return_object) {
 184                 if ((predefined->info.expected_btypes) &&
 185                     (!(predefined->info.expected_btypes & ACPI_RTYPE_NONE))) {
 186                         ACPI_WARN_PREDEFINED((AE_INFO, pathname,
 187                                               ACPI_WARN_ALWAYS,
 188                                               "Missing expected return value"));
 189
 190                         status = AE_AML_NO_RETURN_VALUE;
 191                 }
 192                 goto cleanup;
 193         }
 194
 195         /*
 196          * Return value validation and possible repair.
 197          *
 198          * 1) Don't perform return value validation/repair if this feature
 199          * has been disabled via a global option.
 200          *
 201          * 2) We have a return value, but if one wasn't expected, just exit,
 202          * this is not a problem. For example, if the "Implicit Return"
 203          * feature is enabled, methods will always return a value.
 204          *
 205          * 3) If the return value can be of any type, then we cannot perform
 206          * any validation, just exit.
 207          */
 208         if (acpi_gbl_disable_auto_repair ||
 209             (!predefined->info.expected_btypes) ||
 210             (predefined->info.expected_btypes == ACPI_RTYPE_ALL)) {
 211                 goto cleanup;
 212         }
 213
 214         /* Create the parameter data block for object validation */
 215
 216         data = ACPI_ALLOCATE_ZEROED(sizeof(struct acpi_predefined_data));
 217         if (!data) {
 218                 goto cleanup;
 219         }
 220         data->predefined = predefined;
 221         data->node = node;
 222         data->node_flags = node->flags;
 223         data->pathname = pathname;
 224
 225         /*
 226          * Check that the type of the main return object is what is expected
 227          * for this predefined name
 228          */
 229         status = acpi_ns_check_object_type(data, return_object_ptr,
 230                                            predefined->info.expected_btypes,
 231                                            ACPI_NOT_PACKAGE_ELEMENT);
 232         if (ACPI_FAILURE(status)) {
 233                 goto exit;
 234         }
 235
 236         /*
 237          * For returned Package objects, check the type of all sub-objects.
 238          * Note: Package may have been newly created by call above.
 239          */
 240         if ((*return_object_ptr)->common.type == ACPI_TYPE_PACKAGE) {
 241                 data->parent_package = *return_object_ptr;
 242                 status = acpi_ns_check_package(data, return_object_ptr);
 243                 if (ACPI_FAILURE(status)) {
 244                         goto exit;
 245                 }
 246         }
 247
 248         /*
 249          * The return object was OK, or it was successfully repaired above.
 250          * Now make some additional checks such as verifying that package
 251          * objects are sorted correctly (if required) or buffer objects have
 252          * the correct data width (bytes vs. dwords). These repairs are
 253          * performed on a per-name basis, i.e., the code is specific to
 254          * particular predefined names.
 255          */
 256         status = acpi_ns_complex_repairs(data, node, status, return_object_ptr);
 257
 258 exit:
 259         /*
 260          * If the object validation failed or if we successfully repaired one
 261          * or more objects, mark the parent node to suppress further warning
 262          * messages during the next evaluation of the same method/object.
 263          */
 264         if (ACPI_FAILURE(status) || (data->flags & ACPI_OBJECT_REPAIRED)) {
 265                 node->flags |= ANOBJ_EVALUATED;
 266         }
 267         ACPI_FREE(data);
 268
 269 cleanup:
 270         ACPI_FREE(pathname);
 271         return (status);
 272 }
 273
 274 /*******************************************************************************
 275  *
 276  * FUNCTION:    acpi_ns_check_parameter_count
 277  *
 278  * PARAMETERS:  Pathname        - Full pathname to the node (for error msgs)
 279  *              Node            - Namespace node for the method/object
 280  *              user_param_count - Number of args passed in by the caller
 281  *              Predefined      - Pointer to entry in predefined name table
 282  *
 283  * RETURN:      None
 284  *
 285  * DESCRIPTION: Check that the declared (in ASL/AML) parameter count for a
 286  *              predefined name is what is expected (i.e., what is defined in
 287  *              the ACPI specification for this predefined name.)
 288  *
 289  ******************************************************************************/
 290
 291 void
 292 acpi_ns_check_parameter_count(char *pathname,
 293                               struct acpi_namespace_node *node,
 294                               u32 user_param_count,
 295                               const union acpi_predefined_info *predefined)
 296 {
 297         u32 param_count;
 298         u32 required_params_current;
 299         u32 required_params_old;
 300
 301         /* Methods have 0-7 parameters. All other types have zero. */
 302
 303         param_count = 0;
 304         if (node->type == ACPI_TYPE_METHOD) {
 305                 param_count = node->object->method.param_count;
 306         }
 307
 308         if (!predefined) {
 309                 /*
 310                  * Check the parameter count for non-predefined methods/objects.
 311                  *
 312                  * Warning if too few or too many arguments have been passed by the
 313                  * caller. An incorrect number of arguments may not cause the method
 314                  * to fail. However, the method will fail if there are too few
 315                  * arguments and the method attempts to use one of the missing ones.
 316                  */
 317                 if (user_param_count < param_count) {
 318                         ACPI_WARN_PREDEFINED((AE_INFO, pathname,
 319                                               ACPI_WARN_ALWAYS,
 320                                               "Insufficient arguments - needs %u, found %u",
 321                                               param_count, user_param_count));
 322                 } else if (user_param_count > param_count) {
 323                         ACPI_WARN_PREDEFINED((AE_INFO, pathname,
 324                                               ACPI_WARN_ALWAYS,
 325                                               "Excess arguments - needs %u, found %u",
 326                                               param_count, user_param_count));
 327                 }
 328                 return;
 329         }
 330
 331         /*
 332          * Validate the user-supplied parameter count.
 333          * Allow two different legal argument counts (_SCP, etc.)
 334          */
 335         required_params_current = predefined->info.param_count & 0x0F;
 336         required_params_old = predefined->info.param_count >> 4;
 337
 338         if (user_param_count != ACPI_UINT32_MAX) {
 339                 if ((user_param_count != required_params_current) &&
 340                     (user_param_count != required_params_old)) {
 341                         ACPI_WARN_PREDEFINED((AE_INFO, pathname,
 342                                               ACPI_WARN_ALWAYS,
 343                                               "Parameter count mismatch - "
 344                                               "caller passed %u, ACPI requires %u",
 345                                               user_param_count,
 346                                               required_params_current));
 347                 }
 348         }
 349
 350         /*
 351          * Check that the ASL-defined parameter count is what is expected for
 352          * this predefined name (parameter count as defined by the ACPI
 353          * specification)
 354          */
 355         if ((param_count != required_params_current) &&
 356             (param_count != required_params_old)) {
 357                 ACPI_WARN_PREDEFINED((AE_INFO, pathname, node->flags,
 358                                       "Parameter count mismatch - ASL declared %u, ACPI requires %u",
 359                                       param_count, required_params_current));
 360         }
 361 }
 362
 363 /*******************************************************************************
 364  *
 365  * FUNCTION:    acpi_ns_check_for_predefined_name
 366  *
 367  * PARAMETERS:  Node            - Namespace node for the method/object
 368  *
 369  * RETURN:      Pointer to entry in predefined table. NULL indicates not found.
 370  *
 371  * DESCRIPTION: Check an object name against the predefined object list.
 372  *
 373  ******************************************************************************/
 374
 375 const union acpi_predefined_info *acpi_ns_check_for_predefined_name(struct
 376                                                                     acpi_namespace_node
 377                                                                     *node)
 378 {
 379         const union acpi_predefined_info *this_name;
 380
 381         /* Quick check for a predefined name, first character must be underscore */
 382
 383         if (node->name.ascii[0] != '_') {
 384                 return (NULL);
 385         }
 386
 387         /* Search info table for a predefined method/object name */
 388
 389         this_name = predefined_names;
 390         while (this_name->info.name[0]) {
 391                 if (ACPI_COMPARE_NAME(node->name.ascii, this_name->info.name)) {
 392                         return (this_name);
 393                 }
 394
 395                 /*
 396                  * Skip next entry in the table if this name returns a Package
 397                  * (next entry contains the package info)
 398                  */
 399                 if (this_name->info.expected_btypes & ACPI_RTYPE_PACKAGE) {
 400                         this_name++;
 401                 }
 402
 403                 this_name++;
 404         }
 405
 406         return (NULL);          /* Not found */
 407 }
 408
 409 /*******************************************************************************
 410  *
 411  * FUNCTION:    acpi_ns_check_package
 412  *
 413  * PARAMETERS:  Data            - Pointer to validation data structure
 414  *              return_object_ptr - Pointer to the object returned from the
 415  *                                evaluation of a method or object
 416  *
 417  * RETURN:      Status
 418  *
 419  * DESCRIPTION: Check a returned package object for the correct count and
 420  *              correct type of all sub-objects.
 421  *
 422  ******************************************************************************/
 423
 424 static acpi_status
 425 acpi_ns_check_package(struct acpi_predefined_data *data,
 426                       union acpi_operand_object **return_object_ptr)
 427 {
 428         union acpi_operand_object *return_object = *return_object_ptr;
 429         const union acpi_predefined_info *package;
 430         union acpi_operand_object **elements;
 431         acpi_status status = AE_OK;
 432         u32 expected_count;
 433         u32 count;
 434         u32 i;
 435
 436         ACPI_FUNCTION_NAME(ns_check_package);
 437
 438         /* The package info for this name is in the next table entry */
 439
 440         package = data->predefined + 1;
 441
 442         ACPI_DEBUG_PRINT((ACPI_DB_NAMES,
 443                           "%s Validating return Package of Type %X, Count %X\n",
 444                           data->pathname, package->ret_info.type,
 445                           return_object->package.count));
 446
 447         /*
 448          * For variable-length Packages, we can safely remove all embedded
 449          * and trailing NULL package elements
 450          */
 451         acpi_ns_remove_null_elements(data, package->ret_info.type,
 452                                      return_object);
 453
 454         /* Extract package count and elements array */
 455
 456         elements = return_object->package.elements;
 457         count = return_object->package.count;
 458
 459         /* The package must have at least one element, else invalid */
 460
 461         if (!count) {
 462                 ACPI_WARN_PREDEFINED((AE_INFO, data->pathname, data->node_flags,
 463                                       "Return Package has no elements (empty)"));
 464
 465                 return (AE_AML_OPERAND_VALUE);
 466         }
 467
 468         /*
 469          * Decode the type of the expected package contents
 470          *
 471          * PTYPE1 packages contain no subpackages
 472          * PTYPE2 packages contain sub-packages
 473          */
 474         switch (package->ret_info.type) {
 475         case ACPI_PTYPE1_FIXED:
 476
 477                 /*
 478                  * The package count is fixed and there are no sub-packages
 479                  *
 480                  * If package is too small, exit.
 481                  * If package is larger than expected, issue warning but continue
 482                  */
 483                 expected_count =
 484                     package->ret_info.count1 + package->ret_info.count2;
 485                 if (count < expected_count) {
 486                         goto package_too_small;
 487                 } else if (count > expected_count) {
 488                         ACPI_DEBUG_PRINT((ACPI_DB_REPAIR,
 489                                           "%s: Return Package is larger than needed - "
 490                                           "found %u, expected %u\n",
 491                                           data->pathname, count,
 492                                           expected_count));
 493                 }
 494
 495                 /* Validate all elements of the returned package */
 496
 497                 status = acpi_ns_check_package_elements(data, elements,
 498                                                         package->ret_info.
 499                                                         object_type1,
 500                                                         package->ret_info.
 501                                                         count1,
 502                                                         package->ret_info.
 503                                                         object_type2,
 504                                                         package->ret_info.
 505                                                         count2, 0);
 506                 break;
 507
 508         case ACPI_PTYPE1_VAR:
 509
 510                 /*
 511                  * The package count is variable, there are no sub-packages, and all
 512                  * elements must be of the same type
 513                  */
 514                 for (i = 0; i < count; i++) {
 515                         status = acpi_ns_check_object_type(data, elements,
 516                                                            package->ret_info.
 517                                                            object_type1, i);
 518                         if (ACPI_FAILURE(status)) {
 519                                 return (status);
 520                         }
 521                         elements++;
 522                 }
 523                 break;
 524
 525         case ACPI_PTYPE1_OPTION:
 526
 527                 /*
 528                  * The package count is variable, there are no sub-packages. There are
 529                  * a fixed number of required elements, and a variable number of
 530                  * optional elements.
 531                  *
 532                  * Check if package is at least as large as the minimum required
 533                  */
 534                 expected_count = package->ret_info3.count;
 535                 if (count < expected_count) {
 536                         goto package_too_small;
 537                 }
 538
 539                 /* Variable number of sub-objects */
 540
 541                 for (i = 0; i < count; i++) {
 542                         if (i < package->ret_info3.count) {
 543
 544                                 /* These are the required package elements (0, 1, or 2) */
 545
 546                                 status =
 547                                     acpi_ns_check_object_type(data, elements,
 548                                                               package->
 549                                                               ret_info3.
 550                                                               object_type[i],
 551                                                               i);
 552                                 if (ACPI_FAILURE(status)) {
 553                                         return (status);
 554                                 }
 555                         } else {
 556                                 /* These are the optional package elements */
 557
 558                                 status =
 559                                     acpi_ns_check_object_type(data, elements,
 560                                                               package->
 561                                                               ret_info3.
 562                                                               tail_object_type,
 563                                                               i);
 564                                 if (ACPI_FAILURE(status)) {
 565                                         return (status);
 566                                 }
 567                         }
 568                         elements++;
 569                 }
 570                 break;
 571
 572         case ACPI_PTYPE2_REV_FIXED:
 573
 574                 /* First element is the (Integer) revision */
 575
 576                 status = acpi_ns_check_object_type(data, elements,
 577                                                    ACPI_RTYPE_INTEGER, 0);
 578                 if (ACPI_FAILURE(status)) {
 579                         return (status);
 580                 }
 581
 582                 elements++;
 583                 count--;
 584
 585                 /* Examine the sub-packages */
 586
 587                 status =
 588                     acpi_ns_check_package_list(data, package, elements, count);
 589                 break;
 590
 591         case ACPI_PTYPE2_PKG_COUNT:
 592
 593                 /* First element is the (Integer) count of sub-packages to follow */
 594
 595                 status = acpi_ns_check_object_type(data, elements,
 596                                                    ACPI_RTYPE_INTEGER, 0);
 597                 if (ACPI_FAILURE(status)) {
 598                         return (status);
 599                 }
 600
 601                 /*
 602                  * Count cannot be larger than the parent package length, but allow it
 603                  * to be smaller. The >= accounts for the Integer above.
 604                  */
 605                 expected_count = (u32) (*elements)->integer.value;
 606                 if (expected_count >= count) {
 607                         goto package_too_small;
 608                 }
 609
 610                 count = expected_count;
 611                 elements++;
 612
 613                 /* Examine the sub-packages */
 614
 615                 status =
 616                     acpi_ns_check_package_list(data, package, elements, count);
 617                 break;
 618
 619         case ACPI_PTYPE2:
 620         case ACPI_PTYPE2_FIXED:
 621         case ACPI_PTYPE2_MIN:
 622         case ACPI_PTYPE2_COUNT:
 623
 624                 /*
 625                  * These types all return a single Package that consists of a
 626                  * variable number of sub-Packages.
 627                  *
 628                  * First, ensure that the first element is a sub-Package. If not,
 629                  * the BIOS may have incorrectly returned the object as a single
 630                  * package instead of a Package of Packages (a common error if
 631                  * there is only one entry). We may be able to repair this by
 632                  * wrapping the returned Package with a new outer Package.
 633                  */
 634                 if (*elements
 635                     && ((*elements)->common.type != ACPI_TYPE_PACKAGE)) {
 636
 637                         /* Create the new outer package and populate it */
 638
 639                         status =
 640                             acpi_ns_repair_package_list(data,
 641                                                         return_object_ptr);
 642                         if (ACPI_FAILURE(status)) {
 643                                 return (status);
 644                         }
 645
 646                         /* Update locals to point to the new package (of 1 element) */
 647
 648                         return_object = *return_object_ptr;
 649                         elements = return_object->package.elements;
 650                         count = 1;
 651                 }
 652
 653                 /* Examine the sub-packages */
 654
 655                 status =
 656                     acpi_ns_check_package_list(data, package, elements, count);
 657                 break;
 658
 659         default:
 660
 661                 /* Should not get here if predefined info table is correct */
 662
 663                 ACPI_WARN_PREDEFINED((AE_INFO, data->pathname, data->node_flags,
 664                                       "Invalid internal return type in table entry: %X",
 665                                       package->ret_info.type));
 666
 667                 return (AE_AML_INTERNAL);
 668         }
 669
 670         return (status);
 671
 672 package_too_small:
 673
 674         /* Error exit for the case with an incorrect package count */
 675
 676         ACPI_WARN_PREDEFINED((AE_INFO, data->pathname, data->node_flags,
 677                               "Return Package is too small - found %u elements, expected %u",
 678                               count, expected_count));
 679
 680         return (AE_AML_OPERAND_VALUE);
 681 }
 682
 683 /*******************************************************************************
 684  *
 685  * FUNCTION:    acpi_ns_check_package_list
 686  *
 687  * PARAMETERS:  Data            - Pointer to validation data structure
 688  *              Package         - Pointer to package-specific info for method
 689  *              Elements        - Element list of parent package. All elements
 690  *                                of this list should be of type Package.
 691  *              Count           - Count of subpackages
 692  *
 693  * RETURN:      Status
 694  *
 695  * DESCRIPTION: Examine a list of subpackages
 696  *
 697  ******************************************************************************/
 698
 699 static acpi_status
 700 acpi_ns_check_package_list(struct acpi_predefined_data *data,
 701                            const union acpi_predefined_info *package,
 702                            union acpi_operand_object **elements, u32 count)
 703 {
 704         union acpi_operand_object *sub_package;
 705         union acpi_operand_object **sub_elements;
 706         acpi_status status;
 707         u32 expected_count;
 708         u32 i;
 709         u32 j;
 710
 711         /*
 712          * Validate each sub-Package in the parent Package
 713          *
 714          * NOTE: assumes list of sub-packages contains no NULL elements.
 715          * Any NULL elements should have been removed by earlier call
 716          * to acpi_ns_remove_null_elements.
 717          */
 718         for (i = 0; i < count; i++) {
 719                 sub_package = *elements;
 720                 sub_elements = sub_package->package.elements;
 721                 data->parent_package = sub_package;
 722
 723                 /* Each sub-object must be of type Package */
 724
 725                 status = acpi_ns_check_object_type(data, &sub_package,
 726                                                    ACPI_RTYPE_PACKAGE, i);
 727                 if (ACPI_FAILURE(status)) {
 728                         return (status);
 729                 }
 730
 731                 /* Examine the different types of expected sub-packages */
 732
 733                 data->parent_package = sub_package;
 734                 switch (package->ret_info.type) {
 735                 case ACPI_PTYPE2:
 736                 case ACPI_PTYPE2_PKG_COUNT:
 737                 case ACPI_PTYPE2_REV_FIXED:
 738
 739                         /* Each subpackage has a fixed number of elements */
 740
 741                         expected_count =
 742                             package->ret_info.count1 + package->ret_info.count2;
 743                         if (sub_package->package.count < expected_count) {
 744                                 goto package_too_small;
 745                         }
 746
 747                         status =
 748                             acpi_ns_check_package_elements(data, sub_elements,
 749                                                            package->ret_info.
 750                                                            object_type1,
 751                                                            package->ret_info.
 752                                                            count1,
 753                                                            package->ret_info.
 754                                                            object_type2,
 755                                                            package->ret_info.
 756                                                            count2, 0);
 757                         if (ACPI_FAILURE(status)) {
 758                                 return (status);
 759                         }
 760                         break;
 761
 762                 case ACPI_PTYPE2_FIXED:
 763
 764                         /* Each sub-package has a fixed length */
 765
 766                         expected_count = package->ret_info2.count;
 767                         if (sub_package->package.count < expected_count) {
 768                                 goto package_too_small;
 769                         }
 770
 771                         /* Check the type of each sub-package element */
 772
 773                         for (j = 0; j < expected_count; j++) {
 774                                 status =
 775                                     acpi_ns_check_object_type(data,
 776                                                               &sub_elements[j],
 777                                                               package->
 778                                                               ret_info2.
 779                                                               object_type[j],
 780                                                               j);
 781                                 if (ACPI_FAILURE(status)) {
 782                                         return (status);
 783                                 }
 784                         }
 785                         break;
 786
 787                 case ACPI_PTYPE2_MIN:
 788
 789                         /* Each sub-package has a variable but minimum length */
 790
 791                         expected_count = package->ret_info.count1;
 792                         if (sub_package->package.count < expected_count) {
 793                                 goto package_too_small;
 794                         }
 795
 796                         /* Check the type of each sub-package element */
 797
 798                         status =
 799                             acpi_ns_check_package_elements(data, sub_elements,
 800                                                            package->ret_info.
 801                                                            object_type1,
 802                                                            sub_package->package.
 803                                                            count, 0, 0, 0);
 804                         if (ACPI_FAILURE(status)) {
 805                                 return (status);
 806                         }
 807                         break;
 808
 809                 case ACPI_PTYPE2_COUNT:
 810
 811                         /*
 812                          * First element is the (Integer) count of elements, including
 813                          * the count field (the ACPI name is num_elements)
 814                          */
 815                         status = acpi_ns_check_object_type(data, sub_elements,
 816                                                            ACPI_RTYPE_INTEGER,
 817                                                            0);
 818                         if (ACPI_FAILURE(status)) {
 819                                 return (status);
 820                         }
 821
 822                         /*
 823                          * Make sure package is large enough for the Count and is
 824                          * is as large as the minimum size
 825                          */
 826                         expected_count = (u32)(*sub_elements)->integer.value;
 827                         if (sub_package->package.count < expected_count) {
 828                                 goto package_too_small;
 829                         }
 830                         if (sub_package->package.count <
 831                             package->ret_info.count1) {
 832                                 expected_count = package->ret_info.count1;
 833                                 goto package_too_small;
 834                         }
 835                         if (expected_count == 0) {
 836                                 /*
 837                                  * Either the num_entries element was originally zero or it was
 838                                  * a NULL element and repaired to an Integer of value zero.
 839                                  * In either case, repair it by setting num_entries to be the
 840                                  * actual size of the subpackage.
 841                                  */
 842                                 expected_count = sub_package->package.count;
 843                                 (*sub_elements)->integer.value = expected_count;
 844                         }
 845
 846                         /* Check the type of each sub-package element */
 847
 848                         status =
 849                             acpi_ns_check_package_elements(data,
 850                                                            (sub_elements + 1),
 851                                                            package->ret_info.
 852                                                            object_type1,
 853                                                            (expected_count - 1),
 854                                                            0, 0, 1);
 855                         if (ACPI_FAILURE(status)) {
 856                                 return (status);
 857                         }
 858                         break;
 859
 860                 default:        /* Should not get here, type was validated by caller */
 861
 862                         return (AE_AML_INTERNAL);
 863                 }
 864
 865                 elements++;
 866         }
 867
 868         return (AE_OK);
 869
 870 package_too_small:
 871
 872         /* The sub-package count was smaller than required */
 873
 874         ACPI_WARN_PREDEFINED((AE_INFO, data->pathname, data->node_flags,
 875                               "Return Sub-Package[%u] is too small - found %u elements, expected %u",
 876                               i, sub_package->package.count, expected_count));
 877
 878         return (AE_AML_OPERAND_VALUE);
 879 }
 880
 881 /*******************************************************************************
 882  *
 883  * FUNCTION:    acpi_ns_check_package_elements
 884  *
 885  * PARAMETERS:  Data            - Pointer to validation data structure
 886  *              Elements        - Pointer to the package elements array
 887  *              Type1           - Object type for first group
 888  *              Count1          - Count for first group
 889  *              Type2           - Object type for second group
 890  *              Count2          - Count for second group
 891  *              start_index     - Start of the first group of elements
 892  *
 893  * RETURN:      Status
 894  *
 895  * DESCRIPTION: Check that all elements of a package are of the correct object
 896  *              type. Supports up to two groups of different object types.
 897  *
 898  ******************************************************************************/
 899
 900 static acpi_status
 901 acpi_ns_check_package_elements(struct acpi_predefined_data *data,
 902                                union acpi_operand_object **elements,
 903                                u8 type1,
 904                                u32 count1,
 905                                u8 type2, u32 count2, u32 start_index)
 906 {
 907         union acpi_operand_object **this_element = elements;
 908         acpi_status status;
 909         u32 i;
 910
 911         /*
 912          * Up to two groups of package elements are supported by the data
 913          * structure. All elements in each group must be of the same type.
 914          * The second group can have a count of zero.
 915          */
 916         for (i = 0; i < count1; i++) {
 917                 status = acpi_ns_check_object_type(data, this_element,
 918                                                    type1, i + start_index);
 919                 if (ACPI_FAILURE(status)) {
 920                         return (status);
 921                 }
 922                 this_element++;
 923         }
 924
 925         for (i = 0; i < count2; i++) {
 926                 status = acpi_ns_check_object_type(data, this_element,
 927                                                    type2,
 928                                                    (i + count1 + start_index));
 929                 if (ACPI_FAILURE(status)) {
 930                         return (status);
 931                 }
 932                 this_element++;
 933         }
 934
 935         return (AE_OK);
 936 }
 937
 938 /*******************************************************************************
 939  *
 940  * FUNCTION:    acpi_ns_check_object_type
 941  *
 942  * PARAMETERS:  Data            - Pointer to validation data structure
 943  *              return_object_ptr - Pointer to the object returned from the
 944  *                                evaluation of a method or object
 945  *              expected_btypes - Bitmap of expected return type(s)
 946  *              package_index   - Index of object within parent package (if
 947  *                                applicable - ACPI_NOT_PACKAGE_ELEMENT
 948  *                                otherwise)
 949  *
 950  * RETURN:      Status
 951  *
 952  * DESCRIPTION: Check the type of the return object against the expected object
 953  *              type(s). Use of Btype allows multiple expected object types.
 954  *
 955  ******************************************************************************/
 956
 957 static acpi_status
 958 acpi_ns_check_object_type(struct acpi_predefined_data *data,
 959                           union acpi_operand_object **return_object_ptr,
 960                           u32 expected_btypes, u32 package_index)
 961 {
 962         union acpi_operand_object *return_object = *return_object_ptr;
 963         acpi_status status = AE_OK;
 964         u32 return_btype;
 965         char type_buffer[48];   /* Room for 5 types */
 966
 967         /*
 968          * If we get a NULL return_object here, it is a NULL package element.
 969          * Since all extraneous NULL package elements were removed earlier by a
 970          * call to acpi_ns_remove_null_elements, this is an unexpected NULL element.
 971          * We will attempt to repair it.
 972          */
 973         if (!return_object) {
 974                 status = acpi_ns_repair_null_element(data, expected_btypes,
 975                                                      package_index,
 976                                                      return_object_ptr);
 977                 if (ACPI_SUCCESS(status)) {
 978                         return (AE_OK); /* Repair was successful */
 979                 }
 980                 goto type_error_exit;
 981         }
 982
 983         /* A Namespace node should not get here, but make sure */
 984
 985         if (ACPI_GET_DESCRIPTOR_TYPE(return_object) == ACPI_DESC_TYPE_NAMED) {
 986                 ACPI_WARN_PREDEFINED((AE_INFO, data->pathname, data->node_flags,
 987                                       "Invalid return type - Found a Namespace node [%4.4s] type %s",
 988                                       return_object->node.name.ascii,
 989                                       acpi_ut_get_type_name(return_object->node.
 990                                                             type)));
 991                 return (AE_AML_OPERAND_TYPE);
 992         }
 993
 994         /*
 995          * Convert the object type (ACPI_TYPE_xxx) to a bitmapped object type.
 996          * The bitmapped type allows multiple possible return types.
 997          *
 998          * Note, the cases below must handle all of the possible types returned
 999          * from all of the predefined names (including elements of returned
1000          * packages)
1001          */
1002         switch (return_object->common.type) {
1003         case ACPI_TYPE_INTEGER:
1004                 return_btype = ACPI_RTYPE_INTEGER;
1005                 break;
1006
1007         case ACPI_TYPE_BUFFER:
1008                 return_btype = ACPI_RTYPE_BUFFER;
1009                 break;
1010
1011         case ACPI_TYPE_STRING:
1012                 return_btype = ACPI_RTYPE_STRING;
1013                 break;
1014
1015         case ACPI_TYPE_PACKAGE:
1016                 return_btype = ACPI_RTYPE_PACKAGE;
1017                 break;
1018
1019         case ACPI_TYPE_LOCAL_REFERENCE:
1020                 return_btype = ACPI_RTYPE_REFERENCE;
1021                 break;
1022
1023         default:
1024                 /* Not one of the supported objects, must be incorrect */
1025
1026                 goto type_error_exit;
1027         }
1028
1029         /* Is the object one of the expected types? */
1030
1031         if (return_btype & expected_btypes) {
1032
1033                 /* For reference objects, check that the reference type is correct */
1034
1035                 if (return_object->common.type == ACPI_TYPE_LOCAL_REFERENCE) {
1036                         status = acpi_ns_check_reference(data, return_object);
1037                 }
1038
1039                 return (status);
1040         }
1041
1042         /* Type mismatch -- attempt repair of the returned object */
1043
1044         status = acpi_ns_repair_object(data, expected_btypes,
1045                                        package_index, return_object_ptr);
1046         if (ACPI_SUCCESS(status)) {
1047                 return (AE_OK); /* Repair was successful */
1048         }
1049
1050       type_error_exit:
1051
1052         /* Create a string with all expected types for this predefined object */
1053
1054         acpi_ns_get_expected_types(type_buffer, expected_btypes);
1055
1056         if (package_index == ACPI_NOT_PACKAGE_ELEMENT) {
1057                 ACPI_WARN_PREDEFINED((AE_INFO, data->pathname, data->node_flags,
1058                                       "Return type mismatch - found %s, expected %s",
1059                                       acpi_ut_get_object_type_name
1060                                       (return_object), type_buffer));
1061         } else {
1062                 ACPI_WARN_PREDEFINED((AE_INFO, data->pathname, data->node_flags,
1063                                       "Return Package type mismatch at index %u - "
1064                                       "found %s, expected %s", package_index,
1065                                       acpi_ut_get_object_type_name
1066                                       (return_object), type_buffer));
1067         }
1068
1069         return (AE_AML_OPERAND_TYPE);
1070 }
1071
1072 /*******************************************************************************
1073  *
1074  * FUNCTION:    acpi_ns_check_reference
1075  *
1076  * PARAMETERS:  Data            - Pointer to validation data structure
1077  *              return_object   - Object returned from the evaluation of a
1078  *                                method or object
1079  *
1080  * RETURN:      Status
1081  *
1082  * DESCRIPTION: Check a returned reference object for the correct reference
1083  *              type. The only reference type that can be returned from a
1084  *              predefined method is a named reference. All others are invalid.
1085  *
1086  ******************************************************************************/
1087
1088 static acpi_status
1089 acpi_ns_check_reference(struct acpi_predefined_data *data,
1090                         union acpi_operand_object *return_object)
1091 {
1092
1093         /*
1094          * Check the reference object for the correct reference type (opcode).
1095          * The only type of reference that can be converted to an union acpi_object is
1096          * a reference to a named object (reference class: NAME)
1097          */
1098         if (return_object->reference.class == ACPI_REFCLASS_NAME) {
1099                 return (AE_OK);
1100         }
1101
1102         ACPI_WARN_PREDEFINED((AE_INFO, data->pathname, data->node_flags,
1103                               "Return type mismatch - unexpected reference object type [%s] %2.2X",
1104                               acpi_ut_get_reference_name(return_object),
1105                               return_object->reference.class));
1106
1107         return (AE_AML_OPERAND_TYPE);
1108 }
1109
1110 /*******************************************************************************
1111  *
1112  * FUNCTION:    acpi_ns_get_expected_types
1113  *
1114  * PARAMETERS:  Buffer          - Pointer to where the string is returned
1115  *              expected_btypes - Bitmap of expected return type(s)
1116  *
1117  * RETURN:      Buffer is populated with type names.
1118  *
1119  * DESCRIPTION: Translate the expected types bitmap into a string of ascii
1120  *              names of expected types, for use in warning messages.
1121  *
1122  ******************************************************************************/
1123
1124 static void acpi_ns_get_expected_types(char *buffer, u32 expected_btypes)
1125 {
1126         u32 this_rtype;
1127         u32 i;
1128         u32 j;
1129
1130         j = 1;
1131         buffer[0] = 0;
1132         this_rtype = ACPI_RTYPE_INTEGER;
1133
1134         for (i = 0; i < ACPI_NUM_RTYPES; i++) {
1135
1136                 /* If one of the expected types, concatenate the name of this type */
1137
1138                 if (expected_btypes & this_rtype) {
1139                         ACPI_STRCAT(buffer, &acpi_rtype_names[i][j]);
1140                         j = 0;  /* Use name separator from now on */
1141                 }
1142                 this_rtype <<= 1;       /* Next Rtype */
1143         }
1144 }