drivers/acpi/acpica/evxfregn.c

   1 /******************************************************************************
   2  *
   3  * Module Name: evxfregn - External Interfaces, ACPI Operation Regions and
   4  *                         Address Spaces.
   5  *
   6  *****************************************************************************/
   7
   8 /*
   9  * Copyright (C) 2000 - 2011, Intel Corp.
  10  * All rights reserved.
  11  *
  12  * Redistribution and use in source and binary forms, with or without
  13  * modification, are permitted provided that the following conditions
  14  * are met:
  15  * 1. Redistributions of source code must retain the above copyright
  16  *    notice, this list of conditions, and the following disclaimer,
  17  *    without modification.
  18  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
  19  *    substantially similar to the "NO WARRANTY" disclaimer below
  20  *    ("Disclaimer") and any redistribution must be conditioned upon
  21  *    including a substantially similar Disclaimer requirement for further
  22  *    binary redistribution.
  23  * 3. Neither the names of the above-listed copyright holders nor the names
  24  *    of any contributors may be used to endorse or promote products derived
  25  *    from this software without specific prior written permission.
  26  *
  27  * Alternatively, this software may be distributed under the terms of the
  28  * GNU General Public License ("GPL") version 2 as published by the Free
  29  * Software Foundation.
  30  *
  31  * NO WARRANTY
  32  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  33  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  34  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
  35  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  36  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  37  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  38  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  39  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
  40  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
  41  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  42  * POSSIBILITY OF SUCH DAMAGES.
  43  */
  44
  45 #include <acpi/acpi.h>
  46 #include "accommon.h"
  47 #include "acnamesp.h"
  48 #include "acevents.h"
  49
  50 #define _COMPONENT          ACPI_EVENTS
  51 ACPI_MODULE_NAME("evxfregn")
  52
  53 /*******************************************************************************
  54  *
  55  * FUNCTION:    acpi_install_address_space_handler
  56  *
  57  * PARAMETERS:  Device          - Handle for the device
  58  *              space_id        - The address space ID
  59  *              Handler         - Address of the handler
  60  *              Setup           - Address of the setup function
  61  *              Context         - Value passed to the handler on each access
  62  *
  63  * RETURN:      Status
  64  *
  65  * DESCRIPTION: Install a handler for all op_regions of a given space_id.
  66  *
  67  * NOTE: This function should only be called after acpi_enable_subsystem has
  68  * been called. This is because any _REG methods associated with the Space ID
  69  * are executed here, and these methods can only be safely executed after
  70  * the default handlers have been installed and the hardware has been
  71  * initialized (via acpi_enable_subsystem.)
  72  *
  73  ******************************************************************************/
  74 acpi_status
  75 acpi_install_address_space_handler(acpi_handle device,
  76                                    acpi_adr_space_type space_id,
  77                                    acpi_adr_space_handler handler,
  78                                    acpi_adr_space_setup setup, void *context)
  79 {
  80         struct acpi_namespace_node *node;
  81         acpi_status status;
  82
  83         ACPI_FUNCTION_TRACE(acpi_install_address_space_handler);
  84
  85         /* Parameter validation */
  86
  87         if (!device) {
  88                 return_ACPI_STATUS(AE_BAD_PARAMETER);
  89         }
  90
  91         status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE);
  92         if (ACPI_FAILURE(status)) {
  93                 return_ACPI_STATUS(status);
  94         }
  95
  96         /* Convert and validate the device handle */
  97
  98         node = acpi_ns_validate_handle(device);
  99         if (!node) {
 100                 status = AE_BAD_PARAMETER;
 101                 goto unlock_and_exit;
 102         }
 103
 104         /* Install the handler for all Regions for this Space ID */
 105
 106         status =
 107             acpi_ev_install_space_handler(node, space_id, handler, setup,
 108                                           context);
 109         if (ACPI_FAILURE(status)) {
 110                 goto unlock_and_exit;
 111         }
 112
 113         /*
 114          * For the default space_iDs, (the IDs for which there are default region handlers
 115          * installed) Only execute the _REG methods if the global initialization _REG
 116          * methods have already been run (via acpi_initialize_objects). In other words,
 117          * we will defer the execution of the _REG methods for these space_iDs until
 118          * execution of acpi_initialize_objects. This is done because we need the handlers
 119          * for the default spaces (mem/io/pci/table) to be installed before we can run
 120          * any control methods (or _REG methods). There is known BIOS code that depends
 121          * on this.
 122          *
 123          * For all other space_iDs, we can safely execute the _REG methods immediately.
 124          * This means that for IDs like embedded_controller, this function should be called
 125          * only after acpi_enable_subsystem has been called.
 126          */
 127         switch (space_id) {
 128         case ACPI_ADR_SPACE_SYSTEM_MEMORY:
 129         case ACPI_ADR_SPACE_SYSTEM_IO:
 130         case ACPI_ADR_SPACE_PCI_CONFIG:
 131         case ACPI_ADR_SPACE_DATA_TABLE:
 132
 133                 if (acpi_gbl_reg_methods_executed) {
 134
 135                         /* Run all _REG methods for this address space */
 136
 137                         status = acpi_ev_execute_reg_methods(node, space_id);
 138                 }
 139                 break;
 140
 141         default:
 142
 143                 status = acpi_ev_execute_reg_methods(node, space_id);
 144                 break;
 145         }
 146
 147       unlock_and_exit:
 148         (void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE);
 149         return_ACPI_STATUS(status);
 150 }
 151
 152 ACPI_EXPORT_SYMBOL(acpi_install_address_space_handler)
 153
 154 /*******************************************************************************
 155  *
 156  * FUNCTION:    acpi_remove_address_space_handler
 157  *
 158  * PARAMETERS:  Device          - Handle for the device
 159  *              space_id        - The address space ID
 160  *              Handler         - Address of the handler
 161  *
 162  * RETURN:      Status
 163  *
 164  * DESCRIPTION: Remove a previously installed handler.
 165  *
 166  ******************************************************************************/
 167 acpi_status
 168 acpi_remove_address_space_handler(acpi_handle device,
 169                                   acpi_adr_space_type space_id,
 170                                   acpi_adr_space_handler handler)
 171 {
 172         union acpi_operand_object *obj_desc;
 173         union acpi_operand_object *handler_obj;
 174         union acpi_operand_object *region_obj;
 175         union acpi_operand_object **last_obj_ptr;
 176         struct acpi_namespace_node *node;
 177         acpi_status status;
 178
 179         ACPI_FUNCTION_TRACE(acpi_remove_address_space_handler);
 180
 181         /* Parameter validation */
 182
 183         if (!device) {
 184                 return_ACPI_STATUS(AE_BAD_PARAMETER);
 185         }
 186
 187         status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE);
 188         if (ACPI_FAILURE(status)) {
 189                 return_ACPI_STATUS(status);
 190         }
 191
 192         /* Convert and validate the device handle */
 193
 194         node = acpi_ns_validate_handle(device);
 195         if (!node ||
 196             ((node->type != ACPI_TYPE_DEVICE) &&
 197              (node->type != ACPI_TYPE_PROCESSOR) &&
 198              (node->type != ACPI_TYPE_THERMAL) &&
 199              (node != acpi_gbl_root_node))) {
 200                 status = AE_BAD_PARAMETER;
 201                 goto unlock_and_exit;
 202         }
 203
 204         /* Make sure the internal object exists */
 205
 206         obj_desc = acpi_ns_get_attached_object(node);
 207         if (!obj_desc) {
 208                 status = AE_NOT_EXIST;
 209                 goto unlock_and_exit;
 210         }
 211
 212         /* Find the address handler the user requested */
 213
 214         handler_obj = obj_desc->device.handler;
 215         last_obj_ptr = &obj_desc->device.handler;
 216         while (handler_obj) {
 217
 218                 /* We have a handler, see if user requested this one */
 219
 220                 if (handler_obj->address_space.space_id == space_id) {
 221
 222                         /* Handler must be the same as the installed handler */
 223
 224                         if (handler_obj->address_space.handler != handler) {
 225                                 status = AE_BAD_PARAMETER;
 226                                 goto unlock_and_exit;
 227                         }
 228
 229                         /* Matched space_id, first dereference this in the Regions */
 230
 231                         ACPI_DEBUG_PRINT((ACPI_DB_OPREGION,
 232                                           "Removing address handler %p(%p) for region %s "
 233                                           "on Device %p(%p)\n",
 234                                           handler_obj, handler,
 235                                           acpi_ut_get_region_name(space_id),
 236                                           node, obj_desc));
 237
 238                         region_obj = handler_obj->address_space.region_list;
 239
 240                         /* Walk the handler's region list */
 241
 242                         while (region_obj) {
 243                                 /*
 244                                  * First disassociate the handler from the region.
 245                                  *
 246                                  * NOTE: this doesn't mean that the region goes away
 247                                  * The region is just inaccessible as indicated to
 248                                  * the _REG method
 249                                  */
 250                                 acpi_ev_detach_region(region_obj, TRUE);
 251
 252                                 /*
 253                                  * Walk the list: Just grab the head because the
 254                                  * detach_region removed the previous head.
 255                                  */
 256                                 region_obj =
 257                                     handler_obj->address_space.region_list;
 258
 259                         }
 260
 261                         /* Remove this Handler object from the list */
 262
 263                         *last_obj_ptr = handler_obj->address_space.next;
 264
 265                         /* Now we can delete the handler object */
 266
 267                         acpi_ut_remove_reference(handler_obj);
 268                         goto unlock_and_exit;
 269                 }
 270
 271                 /* Walk the linked list of handlers */
 272
 273                 last_obj_ptr = &handler_obj->address_space.next;
 274                 handler_obj = handler_obj->address_space.next;
 275         }
 276
 277         /* The handler does not exist */
 278
 279         ACPI_DEBUG_PRINT((ACPI_DB_OPREGION,
 280                           "Unable to remove address handler %p for %s(%X), DevNode %p, obj %p\n",
 281                           handler, acpi_ut_get_region_name(space_id), space_id,
 282                           node, obj_desc));
 283
 284         status = AE_NOT_EXIST;
 285
 286       unlock_and_exit:
 287         (void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE);
 288         return_ACPI_STATUS(status);
 289 }
 290
 291 ACPI_EXPORT_SYMBOL(acpi_remove_address_space_handler)