drivers/acpi/acpica/dsobject.c

   1 /******************************************************************************
   2  *
   3  * Module Name: dsobject - Dispatcher object management routines
   4  *
   5  *****************************************************************************/
   6
   7 /*
   8  * Copyright (C) 2000 - 2011, Intel Corp.
   9  * All rights reserved.
  10  *
  11  * Redistribution and use in source and binary forms, with or without
  12  * modification, are permitted provided that the following conditions
  13  * are met:
  14  * 1. Redistributions of source code must retain the above copyright
  15  *    notice, this list of conditions, and the following disclaimer,
  16  *    without modification.
  17  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
  18  *    substantially similar to the "NO WARRANTY" disclaimer below
  19  *    ("Disclaimer") and any redistribution must be conditioned upon
  20  *    including a substantially similar Disclaimer requirement for further
  21  *    binary redistribution.
  22  * 3. Neither the names of the above-listed copyright holders nor the names
  23  *    of any contributors may be used to endorse or promote products derived
  24  *    from this software without specific prior written permission.
  25  *
  26  * Alternatively, this software may be distributed under the terms of the
  27  * GNU General Public License ("GPL") version 2 as published by the Free
  28  * Software Foundation.
  29  *
  30  * NO WARRANTY
  31  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  32  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  33  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
  34  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  35  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  36  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  37  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  38  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
  39  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
  40  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  41  * POSSIBILITY OF SUCH DAMAGES.
  42  */
  43
  44 #include <acpi/acpi.h>
  45 #include "accommon.h"
  46 #include "acparser.h"
  47 #include "amlcode.h"
  48 #include "acdispat.h"
  49 #include "acnamesp.h"
  50 #include "acinterp.h"
  51
  52 #define _COMPONENT          ACPI_DISPATCHER
  53 ACPI_MODULE_NAME("dsobject")
  54
  55 /* Local prototypes */
  56 static acpi_status
  57 acpi_ds_build_internal_object(struct acpi_walk_state *walk_state,
  58                               union acpi_parse_object *op,
  59                               union acpi_operand_object **obj_desc_ptr);
  60
  61 #ifndef ACPI_NO_METHOD_EXECUTION
  62 /*******************************************************************************
  63  *
  64  * FUNCTION:    acpi_ds_build_internal_object
  65  *
  66  * PARAMETERS:  walk_state      - Current walk state
  67  *              Op              - Parser object to be translated
  68  *              obj_desc_ptr    - Where the ACPI internal object is returned
  69  *
  70  * RETURN:      Status
  71  *
  72  * DESCRIPTION: Translate a parser Op object to the equivalent namespace object
  73  *              Simple objects are any objects other than a package object!
  74  *
  75  ******************************************************************************/
  76
  77 static acpi_status
  78 acpi_ds_build_internal_object(struct acpi_walk_state *walk_state,
  79                               union acpi_parse_object *op,
  80                               union acpi_operand_object **obj_desc_ptr)
  81 {
  82         union acpi_operand_object *obj_desc;
  83         acpi_status status;
  84         acpi_object_type type;
  85
  86         ACPI_FUNCTION_TRACE(ds_build_internal_object);
  87
  88         *obj_desc_ptr = NULL;
  89         if (op->common.aml_opcode == AML_INT_NAMEPATH_OP) {
  90                 /*
  91                  * This is a named object reference. If this name was
  92                  * previously looked up in the namespace, it was stored in this op.
  93                  * Otherwise, go ahead and look it up now
  94                  */
  95                 if (!op->common.node) {
  96                         status = acpi_ns_lookup(walk_state->scope_info,
  97                                                 op->common.value.string,
  98                                                 ACPI_TYPE_ANY,
  99                                                 ACPI_IMODE_EXECUTE,
 100                                                 ACPI_NS_SEARCH_PARENT |
 101                                                 ACPI_NS_DONT_OPEN_SCOPE, NULL,
 102                                                 ACPI_CAST_INDIRECT_PTR(struct
 103                                                                        acpi_namespace_node,
 104                                                                        &(op->
 105                                                                          common.
 106                                                                          node)));
 107                         if (ACPI_FAILURE(status)) {
 108
 109                                 /* Check if we are resolving a named reference within a package */
 110
 111                                 if ((status == AE_NOT_FOUND)
 112                                     && (acpi_gbl_enable_interpreter_slack)
 113                                     &&
 114                                     ((op->common.parent->common.aml_opcode ==
 115                                       AML_PACKAGE_OP)
 116                                      || (op->common.parent->common.aml_opcode ==
 117                                          AML_VAR_PACKAGE_OP))) {
 118                                         /*
 119                                          * We didn't find the target and we are populating elements
 120                                          * of a package - ignore if slack enabled. Some ASL code
 121                                          * contains dangling invalid references in packages and
 122                                          * expects that no exception will be issued. Leave the
 123                                          * element as a null element. It cannot be used, but it
 124                                          * can be overwritten by subsequent ASL code - this is
 125                                          * typically the case.
 126                                          */
 127                                         ACPI_DEBUG_PRINT((ACPI_DB_INFO,
 128                                                           "Ignoring unresolved reference in package [%4.4s]\n",
 129                                                           walk_state->
 130                                                           scope_info->scope.
 131                                                           node->name.ascii));
 132
 133                                         return_ACPI_STATUS(AE_OK);
 134                                 } else {
 135                                         ACPI_ERROR_NAMESPACE(op->common.value.
 136                                                              string, status);
 137                                 }
 138
 139                                 return_ACPI_STATUS(status);
 140                         }
 141                 }
 142
 143                 /* Special object resolution for elements of a package */
 144
 145                 if ((op->common.parent->common.aml_opcode == AML_PACKAGE_OP) ||
 146                     (op->common.parent->common.aml_opcode ==
 147                      AML_VAR_PACKAGE_OP)) {
 148                         /*
 149                          * Attempt to resolve the node to a value before we insert it into
 150                          * the package. If this is a reference to a common data type,
 151                          * resolve it immediately. According to the ACPI spec, package
 152                          * elements can only be "data objects" or method references.
 153                          * Attempt to resolve to an Integer, Buffer, String or Package.
 154                          * If cannot, return the named reference (for things like Devices,
 155                          * Methods, etc.) Buffer Fields and Fields will resolve to simple
 156                          * objects (int/buf/str/pkg).
 157                          *
 158                          * NOTE: References to things like Devices, Methods, Mutexes, etc.
 159                          * will remain as named references. This behavior is not described
 160                          * in the ACPI spec, but it appears to be an oversight.
 161                          */
 162                         obj_desc =
 163                             ACPI_CAST_PTR(union acpi_operand_object,
 164                                           op->common.node);
 165
 166                         status =
 167                             acpi_ex_resolve_node_to_value(ACPI_CAST_INDIRECT_PTR
 168                                                           (struct
 169                                                            acpi_namespace_node,
 170                                                            &obj_desc),
 171                                                           walk_state);
 172                         if (ACPI_FAILURE(status)) {
 173                                 return_ACPI_STATUS(status);
 174                         }
 175
 176                         /*
 177                          * Special handling for Alias objects. We need to setup the type
 178                          * and the Op->Common.Node to point to the Alias target. Note,
 179                          * Alias has at most one level of indirection internally.
 180                          */
 181                         type = op->common.node->type;
 182                         if (type == ACPI_TYPE_LOCAL_ALIAS) {
 183                                 type = obj_desc->common.type;
 184                                 op->common.node =
 185                                     ACPI_CAST_PTR(struct acpi_namespace_node,
 186                                                   op->common.node->object);
 187                         }
 188
 189                         switch (type) {
 190                                 /*
 191                                  * For these types, we need the actual node, not the subobject.
 192                                  * However, the subobject did not get an extra reference count above.
 193                                  *
 194                                  * TBD: should ex_resolve_node_to_value be changed to fix this?
 195                                  */
 196                         case ACPI_TYPE_DEVICE:
 197                         case ACPI_TYPE_THERMAL:
 198
 199                                 acpi_ut_add_reference(op->common.node->object);
 200
 201                                 /*lint -fallthrough */
 202                                 /*
 203                                  * For these types, we need the actual node, not the subobject.
 204                                  * The subobject got an extra reference count in ex_resolve_node_to_value.
 205                                  */
 206                         case ACPI_TYPE_MUTEX:
 207                         case ACPI_TYPE_METHOD:
 208                         case ACPI_TYPE_POWER:
 209                         case ACPI_TYPE_PROCESSOR:
 210                         case ACPI_TYPE_EVENT:
 211                         case ACPI_TYPE_REGION:
 212
 213                                 /* We will create a reference object for these types below */
 214                                 break;
 215
 216                         default:
 217                                 /*
 218                                  * All other types - the node was resolved to an actual
 219                                  * object, we are done.
 220                                  */
 221                                 goto exit;
 222                         }
 223                 }
 224         }
 225
 226         /* Create and init a new internal ACPI object */
 227
 228         obj_desc = acpi_ut_create_internal_object((acpi_ps_get_opcode_info
 229                                                    (op->common.aml_opcode))->
 230                                                   object_type);
 231         if (!obj_desc) {
 232                 return_ACPI_STATUS(AE_NO_MEMORY);
 233         }
 234
 235         status =
 236             acpi_ds_init_object_from_op(walk_state, op, op->common.aml_opcode,
 237                                         &obj_desc);
 238         if (ACPI_FAILURE(status)) {
 239                 acpi_ut_remove_reference(obj_desc);
 240                 return_ACPI_STATUS(status);
 241         }
 242
 243       exit:
 244         *obj_desc_ptr = obj_desc;
 245         return_ACPI_STATUS(status);
 246 }
 247
 248 /*******************************************************************************
 249  *
 250  * FUNCTION:    acpi_ds_build_internal_buffer_obj
 251  *
 252  * PARAMETERS:  walk_state      - Current walk state
 253  *              Op              - Parser object to be translated
 254  *              buffer_length   - Length of the buffer
 255  *              obj_desc_ptr    - Where the ACPI internal object is returned
 256  *
 257  * RETURN:      Status
 258  *
 259  * DESCRIPTION: Translate a parser Op package object to the equivalent
 260  *              namespace object
 261  *
 262  ******************************************************************************/
 263
 264 acpi_status
 265 acpi_ds_build_internal_buffer_obj(struct acpi_walk_state *walk_state,
 266                                   union acpi_parse_object *op,
 267                                   u32 buffer_length,
 268                                   union acpi_operand_object **obj_desc_ptr)
 269 {
 270         union acpi_parse_object *arg;
 271         union acpi_operand_object *obj_desc;
 272         union acpi_parse_object *byte_list;
 273         u32 byte_list_length = 0;
 274
 275         ACPI_FUNCTION_TRACE(ds_build_internal_buffer_obj);
 276
 277         /*
 278          * If we are evaluating a Named buffer object "Name (xxxx, Buffer)".
 279          * The buffer object already exists (from the NS node), otherwise it must
 280          * be created.
 281          */
 282         obj_desc = *obj_desc_ptr;
 283         if (!obj_desc) {
 284
 285                 /* Create a new buffer object */
 286
 287                 obj_desc = acpi_ut_create_internal_object(ACPI_TYPE_BUFFER);
 288                 *obj_desc_ptr = obj_desc;
 289                 if (!obj_desc) {
 290                         return_ACPI_STATUS(AE_NO_MEMORY);
 291                 }
 292         }
 293
 294         /*
 295          * Second arg is the buffer data (optional) byte_list can be either
 296          * individual bytes or a string initializer.  In either case, a
 297          * byte_list appears in the AML.
 298          */
 299         arg = op->common.value.arg;     /* skip first arg */
 300
 301         byte_list = arg->named.next;
 302         if (byte_list) {
 303                 if (byte_list->common.aml_opcode != AML_INT_BYTELIST_OP) {
 304                         ACPI_ERROR((AE_INFO,
 305                                     "Expecting bytelist, found AML opcode 0x%X in op %p",
 306                                     byte_list->common.aml_opcode, byte_list));
 307
 308                         acpi_ut_remove_reference(obj_desc);
 309                         return (AE_TYPE);
 310                 }
 311
 312                 byte_list_length = (u32) byte_list->common.value.integer;
 313         }
 314
 315         /*
 316          * The buffer length (number of bytes) will be the larger of:
 317          * 1) The specified buffer length and
 318          * 2) The length of the initializer byte list
 319          */
 320         obj_desc->buffer.length = buffer_length;
 321         if (byte_list_length > buffer_length) {
 322                 obj_desc->buffer.length = byte_list_length;
 323         }
 324
 325         /* Allocate the buffer */
 326
 327         if (obj_desc->buffer.length == 0) {
 328                 obj_desc->buffer.pointer = NULL;
 329                 ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
 330                                   "Buffer defined with zero length in AML, creating\n"));
 331         } else {
 332                 obj_desc->buffer.pointer =
 333                     ACPI_ALLOCATE_ZEROED(obj_desc->buffer.length);
 334                 if (!obj_desc->buffer.pointer) {
 335                         acpi_ut_delete_object_desc(obj_desc);
 336                         return_ACPI_STATUS(AE_NO_MEMORY);
 337                 }
 338
 339                 /* Initialize buffer from the byte_list (if present) */
 340
 341                 if (byte_list) {
 342                         ACPI_MEMCPY(obj_desc->buffer.pointer,
 343                                     byte_list->named.data, byte_list_length);
 344                 }
 345         }
 346
 347         obj_desc->buffer.flags |= AOPOBJ_DATA_VALID;
 348         op->common.node = ACPI_CAST_PTR(struct acpi_namespace_node, obj_desc);
 349         return_ACPI_STATUS(AE_OK);
 350 }
 351
 352 /*******************************************************************************
 353  *
 354  * FUNCTION:    acpi_ds_build_internal_package_obj
 355  *
 356  * PARAMETERS:  walk_state      - Current walk state
 357  *              Op              - Parser object to be translated
 358  *              element_count   - Number of elements in the package - this is
 359  *                                the num_elements argument to Package()
 360  *              obj_desc_ptr    - Where the ACPI internal object is returned
 361  *
 362  * RETURN:      Status
 363  *
 364  * DESCRIPTION: Translate a parser Op package object to the equivalent
 365  *              namespace object
 366  *
 367  * NOTE: The number of elements in the package will be always be the num_elements
 368  * count, regardless of the number of elements in the package list. If
 369  * num_elements is smaller, only that many package list elements are used.
 370  * if num_elements is larger, the Package object is padded out with
 371  * objects of type Uninitialized (as per ACPI spec.)
 372  *
 373  * Even though the ASL compilers do not allow num_elements to be smaller
 374  * than the Package list length (for the fixed length package opcode), some
 375  * BIOS code modifies the AML on the fly to adjust the num_elements, and
 376  * this code compensates for that. This also provides compatibility with
 377  * other AML interpreters.
 378  *
 379  ******************************************************************************/
 380
 381 acpi_status
 382 acpi_ds_build_internal_package_obj(struct acpi_walk_state *walk_state,
 383                                    union acpi_parse_object *op,
 384                                    u32 element_count,
 385                                    union acpi_operand_object **obj_desc_ptr)
 386 {
 387         union acpi_parse_object *arg;
 388         union acpi_parse_object *parent;
 389         union acpi_operand_object *obj_desc = NULL;
 390         acpi_status status = AE_OK;
 391         unsigned i;
 392         u16 index;
 393         u16 reference_count;
 394
 395         ACPI_FUNCTION_TRACE(ds_build_internal_package_obj);
 396
 397         /* Find the parent of a possibly nested package */
 398
 399         parent = op->common.parent;
 400         while ((parent->common.aml_opcode == AML_PACKAGE_OP) ||
 401                (parent->common.aml_opcode == AML_VAR_PACKAGE_OP)) {
 402                 parent = parent->common.parent;
 403         }
 404
 405         /*
 406          * If we are evaluating a Named package object "Name (xxxx, Package)",
 407          * the package object already exists, otherwise it must be created.
 408          */
 409         obj_desc = *obj_desc_ptr;
 410         if (!obj_desc) {
 411                 obj_desc = acpi_ut_create_internal_object(ACPI_TYPE_PACKAGE);
 412                 *obj_desc_ptr = obj_desc;
 413                 if (!obj_desc) {
 414                         return_ACPI_STATUS(AE_NO_MEMORY);
 415                 }
 416
 417                 obj_desc->package.node = parent->common.node;
 418         }
 419
 420         /*
 421          * Allocate the element array (array of pointers to the individual
 422          * objects) based on the num_elements parameter. Add an extra pointer slot
 423          * so that the list is always null terminated.
 424          */
 425         obj_desc->package.elements = ACPI_ALLOCATE_ZEROED(((acpi_size)
 426                                                            element_count +
 427                                                            1) * sizeof(void *));
 428
 429         if (!obj_desc->package.elements) {
 430                 acpi_ut_delete_object_desc(obj_desc);
 431                 return_ACPI_STATUS(AE_NO_MEMORY);
 432         }
 433
 434         obj_desc->package.count = element_count;
 435
 436         /*
 437          * Initialize the elements of the package, up to the num_elements count.
 438          * Package is automatically padded with uninitialized (NULL) elements
 439          * if num_elements is greater than the package list length. Likewise,
 440          * Package is truncated if num_elements is less than the list length.
 441          */
 442         arg = op->common.value.arg;
 443         arg = arg->common.next;
 444         for (i = 0; arg && (i < element_count); i++) {
 445                 if (arg->common.aml_opcode == AML_INT_RETURN_VALUE_OP) {
 446                         if (arg->common.node->type == ACPI_TYPE_METHOD) {
 447                                 /*
 448                                  * A method reference "looks" to the parser to be a method
 449                                  * invocation, so we special case it here
 450                                  */
 451                                 arg->common.aml_opcode = AML_INT_NAMEPATH_OP;
 452                                 status =
 453                                     acpi_ds_build_internal_object(walk_state,
 454                                                                   arg,
 455                                                                   &obj_desc->
 456                                                                   package.
 457                                                                   elements[i]);
 458                         } else {
 459                                 /* This package element is already built, just get it */
 460
 461                                 obj_desc->package.elements[i] =
 462                                     ACPI_CAST_PTR(union acpi_operand_object,
 463                                                   arg->common.node);
 464                         }
 465                 } else {
 466                         status = acpi_ds_build_internal_object(walk_state, arg,
 467                                                                &obj_desc->
 468                                                                package.
 469                                                                elements[i]);
 470                 }
 471
 472                 if (*obj_desc_ptr) {
 473
 474                         /* Existing package, get existing reference count */
 475
 476                         reference_count =
 477                             (*obj_desc_ptr)->common.reference_count;
 478                         if (reference_count > 1) {
 479
 480                                 /* Make new element ref count match original ref count */
 481
 482                                 for (index = 0; index < (reference_count - 1);
 483                                      index++) {
 484                                         acpi_ut_add_reference((obj_desc->
 485                                                                package.
 486                                                                elements[i]));
 487                                 }
 488                         }
 489                 }
 490
 491                 arg = arg->common.next;
 492         }
 493
 494         /* Check for match between num_elements and actual length of package_list */
 495
 496         if (arg) {
 497                 /*
 498                  * num_elements was exhausted, but there are remaining elements in the
 499                  * package_list. Truncate the package to num_elements.
 500                  *
 501                  * Note: technically, this is an error, from ACPI spec: "It is an error
 502                  * for NumElements to be less than the number of elements in the
 503                  * PackageList". However, we just print a message and
 504                  * no exception is returned. This provides Windows compatibility. Some
 505                  * BIOSs will alter the num_elements on the fly, creating this type
 506                  * of ill-formed package object.
 507                  */
 508                 while (arg) {
 509                         /*
 510                          * We must delete any package elements that were created earlier
 511                          * and are not going to be used because of the package truncation.
 512                          */
 513                         if (arg->common.node) {
 514                                 acpi_ut_remove_reference(ACPI_CAST_PTR
 515                                                          (union
 516                                                           acpi_operand_object,
 517                                                           arg->common.node));
 518                                 arg->common.node = NULL;
 519                         }
 520
 521                         /* Find out how many elements there really are */
 522
 523                         i++;
 524                         arg = arg->common.next;
 525                 }
 526
 527                 ACPI_INFO((AE_INFO,
 528                            "Actual Package length (%u) is larger than NumElements field (%u), truncated\n",
 529                            i, element_count));
 530         } else if (i < element_count) {
 531                 /*
 532                  * Arg list (elements) was exhausted, but we did not reach num_elements count.
 533                  * Note: this is not an error, the package is padded out with NULLs.
 534                  */
 535                 ACPI_DEBUG_PRINT((ACPI_DB_INFO,
 536                                   "Package List length (%u) smaller than NumElements count (%u), padded with null elements\n",
 537                                   i, element_count));
 538         }
 539
 540         obj_desc->package.flags |= AOPOBJ_DATA_VALID;
 541         op->common.node = ACPI_CAST_PTR(struct acpi_namespace_node, obj_desc);
 542         return_ACPI_STATUS(status);
 543 }
 544
 545 /*******************************************************************************
 546  *
 547  * FUNCTION:    acpi_ds_create_node
 548  *
 549  * PARAMETERS:  walk_state      - Current walk state
 550  *              Node            - NS Node to be initialized
 551  *              Op              - Parser object to be translated
 552  *
 553  * RETURN:      Status
 554  *
 555  * DESCRIPTION: Create the object to be associated with a namespace node
 556  *
 557  ******************************************************************************/
 558
 559 acpi_status
 560 acpi_ds_create_node(struct acpi_walk_state *walk_state,
 561                     struct acpi_namespace_node *node,
 562                     union acpi_parse_object *op)
 563 {
 564         acpi_status status;
 565         union acpi_operand_object *obj_desc;
 566
 567         ACPI_FUNCTION_TRACE_PTR(ds_create_node, op);
 568
 569         /*
 570          * Because of the execution pass through the non-control-method
 571          * parts of the table, we can arrive here twice.  Only init
 572          * the named object node the first time through
 573          */
 574         if (acpi_ns_get_attached_object(node)) {
 575                 return_ACPI_STATUS(AE_OK);
 576         }
 577
 578         if (!op->common.value.arg) {
 579
 580                 /* No arguments, there is nothing to do */
 581
 582                 return_ACPI_STATUS(AE_OK);
 583         }
 584
 585         /* Build an internal object for the argument(s) */
 586
 587         status = acpi_ds_build_internal_object(walk_state, op->common.value.arg,
 588                                                &obj_desc);
 589         if (ACPI_FAILURE(status)) {
 590                 return_ACPI_STATUS(status);
 591         }
 592
 593         /* Re-type the object according to its argument */
 594
 595         node->type = obj_desc->common.type;
 596
 597         /* Attach obj to node */
 598
 599         status = acpi_ns_attach_object(node, obj_desc, node->type);
 600
 601         /* Remove local reference to the object */
 602
 603         acpi_ut_remove_reference(obj_desc);
 604         return_ACPI_STATUS(status);
 605 }
 606
 607 #endif                          /* ACPI_NO_METHOD_EXECUTION */
 608
 609 /*******************************************************************************
 610  *
 611  * FUNCTION:    acpi_ds_init_object_from_op
 612  *
 613  * PARAMETERS:  walk_state      - Current walk state
 614  *              Op              - Parser op used to init the internal object
 615  *              Opcode          - AML opcode associated with the object
 616  *              ret_obj_desc    - Namespace object to be initialized
 617  *
 618  * RETURN:      Status
 619  *
 620  * DESCRIPTION: Initialize a namespace object from a parser Op and its
 621  *              associated arguments.  The namespace object is a more compact
 622  *              representation of the Op and its arguments.
 623  *
 624  ******************************************************************************/
 625
 626 acpi_status
 627 acpi_ds_init_object_from_op(struct acpi_walk_state *walk_state,
 628                             union acpi_parse_object *op,
 629                             u16 opcode,
 630                             union acpi_operand_object **ret_obj_desc)
 631 {
 632         const struct acpi_opcode_info *op_info;
 633         union acpi_operand_object *obj_desc;
 634         acpi_status status = AE_OK;
 635
 636         ACPI_FUNCTION_TRACE(ds_init_object_from_op);
 637
 638         obj_desc = *ret_obj_desc;
 639         op_info = acpi_ps_get_opcode_info(opcode);
 640         if (op_info->class == AML_CLASS_UNKNOWN) {
 641
 642                 /* Unknown opcode */
 643
 644                 return_ACPI_STATUS(AE_TYPE);
 645         }
 646
 647         /* Perform per-object initialization */
 648
 649         switch (obj_desc->common.type) {
 650         case ACPI_TYPE_BUFFER:
 651
 652                 /*
 653                  * Defer evaluation of Buffer term_arg operand
 654                  */
 655                 obj_desc->buffer.node =
 656                     ACPI_CAST_PTR(struct acpi_namespace_node,
 657                                   walk_state->operands[0]);
 658                 obj_desc->buffer.aml_start = op->named.data;
 659                 obj_desc->buffer.aml_length = op->named.length;
 660                 break;
 661
 662         case ACPI_TYPE_PACKAGE:
 663
 664                 /*
 665                  * Defer evaluation of Package term_arg operand
 666                  */
 667                 obj_desc->package.node =
 668                     ACPI_CAST_PTR(struct acpi_namespace_node,
 669                                   walk_state->operands[0]);
 670                 obj_desc->package.aml_start = op->named.data;
 671                 obj_desc->package.aml_length = op->named.length;
 672                 break;
 673
 674         case ACPI_TYPE_INTEGER:
 675
 676                 switch (op_info->type) {
 677                 case AML_TYPE_CONSTANT:
 678                         /*
 679                          * Resolve AML Constants here - AND ONLY HERE!
 680                          * All constants are integers.
 681                          * We mark the integer with a flag that indicates that it started
 682                          * life as a constant -- so that stores to constants will perform
 683                          * as expected (noop). zero_op is used as a placeholder for optional
 684                          * target operands.
 685                          */
 686                         obj_desc->common.flags = AOPOBJ_AML_CONSTANT;
 687
 688                         switch (opcode) {
 689                         case AML_ZERO_OP:
 690
 691                                 obj_desc->integer.value = 0;
 692                                 break;
 693
 694                         case AML_ONE_OP:
 695
 696                                 obj_desc->integer.value = 1;
 697                                 break;
 698
 699                         case AML_ONES_OP:
 700
 701                                 obj_desc->integer.value = ACPI_UINT64_MAX;
 702
 703                                 /* Truncate value if we are executing from a 32-bit ACPI table */
 704
 705 #ifndef ACPI_NO_METHOD_EXECUTION
 706                                 acpi_ex_truncate_for32bit_table(obj_desc);
 707 #endif
 708                                 break;
 709
 710                         case AML_REVISION_OP:
 711
 712                                 obj_desc->integer.value = ACPI_CA_VERSION;
 713                                 break;
 714
 715                         default:
 716
 717                                 ACPI_ERROR((AE_INFO,
 718                                             "Unknown constant opcode 0x%X",
 719                                             opcode));
 720                                 status = AE_AML_OPERAND_TYPE;
 721                                 break;
 722                         }
 723                         break;
 724
 725                 case AML_TYPE_LITERAL:
 726
 727                         obj_desc->integer.value = op->common.value.integer;
 728 #ifndef ACPI_NO_METHOD_EXECUTION
 729                         acpi_ex_truncate_for32bit_table(obj_desc);
 730 #endif
 731                         break;
 732
 733                 default:
 734                         ACPI_ERROR((AE_INFO, "Unknown Integer type 0x%X",
 735                                     op_info->type));
 736                         status = AE_AML_OPERAND_TYPE;
 737                         break;
 738                 }
 739                 break;
 740
 741         case ACPI_TYPE_STRING:
 742
 743                 obj_desc->string.pointer = op->common.value.string;
 744                 obj_desc->string.length =
 745                     (u32) ACPI_STRLEN(op->common.value.string);
 746
 747                 /*
 748                  * The string is contained in the ACPI table, don't ever try
 749                  * to delete it
 750                  */
 751                 obj_desc->common.flags |= AOPOBJ_STATIC_POINTER;
 752                 break;
 753
 754         case ACPI_TYPE_METHOD:
 755                 break;
 756
 757         case ACPI_TYPE_LOCAL_REFERENCE:
 758
 759                 switch (op_info->type) {
 760                 case AML_TYPE_LOCAL_VARIABLE:
 761
 762                         /* Local ID (0-7) is (AML opcode - base AML_LOCAL_OP) */
 763
 764                         obj_desc->reference.value =
 765                             ((u32)opcode) - AML_LOCAL_OP;
 766                         obj_desc->reference.class = ACPI_REFCLASS_LOCAL;
 767
 768 #ifndef ACPI_NO_METHOD_EXECUTION
 769                         status =
 770                             acpi_ds_method_data_get_node(ACPI_REFCLASS_LOCAL,
 771                                                          obj_desc->reference.
 772                                                          value, walk_state,
 773                                                          ACPI_CAST_INDIRECT_PTR
 774                                                          (struct
 775                                                           acpi_namespace_node,
 776                                                           &obj_desc->reference.
 777                                                           object));
 778 #endif
 779                         break;
 780
 781                 case AML_TYPE_METHOD_ARGUMENT:
 782
 783                         /* Arg ID (0-6) is (AML opcode - base AML_ARG_OP) */
 784
 785                         obj_desc->reference.value = ((u32)opcode) - AML_ARG_OP;
 786                         obj_desc->reference.class = ACPI_REFCLASS_ARG;
 787
 788 #ifndef ACPI_NO_METHOD_EXECUTION
 789                         status = acpi_ds_method_data_get_node(ACPI_REFCLASS_ARG,
 790                                                               obj_desc->
 791                                                               reference.value,
 792                                                               walk_state,
 793                                                               ACPI_CAST_INDIRECT_PTR
 794                                                               (struct
 795                                                                acpi_namespace_node,
 796                                                                &obj_desc->
 797                                                                reference.
 798                                                                object));
 799 #endif
 800                         break;
 801
 802                 default:        /* Object name or Debug object */
 803
 804                         switch (op->common.aml_opcode) {
 805                         case AML_INT_NAMEPATH_OP:
 806
 807                                 /* Node was saved in Op */
 808
 809                                 obj_desc->reference.node = op->common.node;
 810                                 obj_desc->reference.object =
 811                                     op->common.node->object;
 812                                 obj_desc->reference.class = ACPI_REFCLASS_NAME;
 813                                 break;
 814
 815                         case AML_DEBUG_OP:
 816
 817                                 obj_desc->reference.class = ACPI_REFCLASS_DEBUG;
 818                                 break;
 819
 820                         default:
 821
 822                                 ACPI_ERROR((AE_INFO,
 823                                             "Unimplemented reference type for AML opcode: 0x%4.4X",
 824                                             opcode));
 825                                 return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
 826                         }
 827                         break;
 828                 }
 829                 break;
 830
 831         default:
 832
 833                 ACPI_ERROR((AE_INFO, "Unimplemented data type: 0x%X",
 834                             obj_desc->common.type));
 835
 836                 status = AE_AML_OPERAND_TYPE;
 837                 break;
 838         }
 839
 840         return_ACPI_STATUS(status);
 841 }