[XFS] Fix merge failures
[pandora-kernel.git] / arch / x86 / kernel / traps.c
1 /*
2  *  Copyright (C) 1991, 1992  Linus Torvalds
3  *  Copyright (C) 2000, 2001, 2002 Andi Kleen, SuSE Labs
4  *
5  *  Pentium III FXSR, SSE support
6  *      Gareth Hughes <gareth@valinux.com>, May 2000
7  */
8
9 /*
10  * Handle hardware traps and faults.
11  */
12 #include <linux/interrupt.h>
13 #include <linux/kallsyms.h>
14 #include <linux/spinlock.h>
15 #include <linux/kprobes.h>
16 #include <linux/uaccess.h>
17 #include <linux/utsname.h>
18 #include <linux/kdebug.h>
19 #include <linux/kernel.h>
20 #include <linux/module.h>
21 #include <linux/ptrace.h>
22 #include <linux/string.h>
23 #include <linux/unwind.h>
24 #include <linux/delay.h>
25 #include <linux/errno.h>
26 #include <linux/kexec.h>
27 #include <linux/sched.h>
28 #include <linux/timer.h>
29 #include <linux/init.h>
30 #include <linux/bug.h>
31 #include <linux/nmi.h>
32 #include <linux/mm.h>
33 #include <linux/smp.h>
34 #include <linux/io.h>
35
36 #ifdef CONFIG_EISA
37 #include <linux/ioport.h>
38 #include <linux/eisa.h>
39 #endif
40
41 #ifdef CONFIG_MCA
42 #include <linux/mca.h>
43 #endif
44
45 #if defined(CONFIG_EDAC)
46 #include <linux/edac.h>
47 #endif
48
49 #include <asm/stacktrace.h>
50 #include <asm/processor.h>
51 #include <asm/debugreg.h>
52 #include <asm/atomic.h>
53 #include <asm/system.h>
54 #include <asm/unwind.h>
55 #include <asm/traps.h>
56 #include <asm/desc.h>
57 #include <asm/i387.h>
58
59 #include <mach_traps.h>
60
61 #ifdef CONFIG_X86_64
62 #include <asm/pgalloc.h>
63 #include <asm/proto.h>
64 #include <asm/pda.h>
65 #else
66 #include <asm/processor-flags.h>
67 #include <asm/arch_hooks.h>
68 #include <asm/nmi.h>
69 #include <asm/smp.h>
70 #include <asm/io.h>
71 #include <asm/traps.h>
72
73 #include "cpu/mcheck/mce.h"
74
75 DECLARE_BITMAP(used_vectors, NR_VECTORS);
76 EXPORT_SYMBOL_GPL(used_vectors);
77
78 asmlinkage int system_call(void);
79
80 /* Do we ignore FPU interrupts ? */
81 char ignore_fpu_irq;
82
83 /*
84  * The IDT has to be page-aligned to simplify the Pentium
85  * F0 0F bug workaround.. We have a special link segment
86  * for this.
87  */
88 gate_desc idt_table[256]
89         __attribute__((__section__(".data.idt"))) = { { { { 0, 0 } } }, };
90 #endif
91
92 static int ignore_nmis;
93
94 static inline void conditional_sti(struct pt_regs *regs)
95 {
96         if (regs->flags & X86_EFLAGS_IF)
97                 local_irq_enable();
98 }
99
100 static inline void preempt_conditional_sti(struct pt_regs *regs)
101 {
102         inc_preempt_count();
103         if (regs->flags & X86_EFLAGS_IF)
104                 local_irq_enable();
105 }
106
107 static inline void preempt_conditional_cli(struct pt_regs *regs)
108 {
109         if (regs->flags & X86_EFLAGS_IF)
110                 local_irq_disable();
111         dec_preempt_count();
112 }
113
114 #ifdef CONFIG_X86_32
115 static inline void
116 die_if_kernel(const char *str, struct pt_regs *regs, long err)
117 {
118         if (!user_mode_vm(regs))
119                 die(str, regs, err);
120 }
121
122 /*
123  * Perform the lazy TSS's I/O bitmap copy. If the TSS has an
124  * invalid offset set (the LAZY one) and the faulting thread has
125  * a valid I/O bitmap pointer, we copy the I/O bitmap in the TSS,
126  * we set the offset field correctly and return 1.
127  */
128 static int lazy_iobitmap_copy(void)
129 {
130         struct thread_struct *thread;
131         struct tss_struct *tss;
132         int cpu;
133
134         cpu = get_cpu();
135         tss = &per_cpu(init_tss, cpu);
136         thread = &current->thread;
137
138         if (tss->x86_tss.io_bitmap_base == INVALID_IO_BITMAP_OFFSET_LAZY &&
139             thread->io_bitmap_ptr) {
140                 memcpy(tss->io_bitmap, thread->io_bitmap_ptr,
141                        thread->io_bitmap_max);
142                 /*
143                  * If the previously set map was extending to higher ports
144                  * than the current one, pad extra space with 0xff (no access).
145                  */
146                 if (thread->io_bitmap_max < tss->io_bitmap_max) {
147                         memset((char *) tss->io_bitmap +
148                                 thread->io_bitmap_max, 0xff,
149                                 tss->io_bitmap_max - thread->io_bitmap_max);
150                 }
151                 tss->io_bitmap_max = thread->io_bitmap_max;
152                 tss->x86_tss.io_bitmap_base = IO_BITMAP_OFFSET;
153                 tss->io_bitmap_owner = thread;
154                 put_cpu();
155
156                 return 1;
157         }
158         put_cpu();
159
160         return 0;
161 }
162 #endif
163
164 static void __kprobes
165 do_trap(int trapnr, int signr, char *str, struct pt_regs *regs,
166         long error_code, siginfo_t *info)
167 {
168         struct task_struct *tsk = current;
169
170 #ifdef CONFIG_X86_32
171         if (regs->flags & X86_VM_MASK) {
172                 /*
173                  * traps 0, 1, 3, 4, and 5 should be forwarded to vm86.
174                  * On nmi (interrupt 2), do_trap should not be called.
175                  */
176                 if (trapnr < 6)
177                         goto vm86_trap;
178                 goto trap_signal;
179         }
180 #endif
181
182         if (!user_mode(regs))
183                 goto kernel_trap;
184
185 #ifdef CONFIG_X86_32
186 trap_signal:
187 #endif
188         /*
189          * We want error_code and trap_no set for userspace faults and
190          * kernelspace faults which result in die(), but not
191          * kernelspace faults which are fixed up.  die() gives the
192          * process no chance to handle the signal and notice the
193          * kernel fault information, so that won't result in polluting
194          * the information about previously queued, but not yet
195          * delivered, faults.  See also do_general_protection below.
196          */
197         tsk->thread.error_code = error_code;
198         tsk->thread.trap_no = trapnr;
199
200 #ifdef CONFIG_X86_64
201         if (show_unhandled_signals && unhandled_signal(tsk, signr) &&
202             printk_ratelimit()) {
203                 printk(KERN_INFO
204                        "%s[%d] trap %s ip:%lx sp:%lx error:%lx",
205                        tsk->comm, tsk->pid, str,
206                        regs->ip, regs->sp, error_code);
207                 print_vma_addr(" in ", regs->ip);
208                 printk("\n");
209         }
210 #endif
211
212         if (info)
213                 force_sig_info(signr, info, tsk);
214         else
215                 force_sig(signr, tsk);
216         return;
217
218 kernel_trap:
219         if (!fixup_exception(regs)) {
220                 tsk->thread.error_code = error_code;
221                 tsk->thread.trap_no = trapnr;
222                 die(str, regs, error_code);
223         }
224         return;
225
226 #ifdef CONFIG_X86_32
227 vm86_trap:
228         if (handle_vm86_trap((struct kernel_vm86_regs *) regs,
229                                                 error_code, trapnr))
230                 goto trap_signal;
231         return;
232 #endif
233 }
234
235 #define DO_ERROR(trapnr, signr, str, name)                              \
236 dotraplinkage void do_##name(struct pt_regs *regs, long error_code)     \
237 {                                                                       \
238         if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, signr)  \
239                                                         == NOTIFY_STOP) \
240                 return;                                                 \
241         conditional_sti(regs);                                          \
242         do_trap(trapnr, signr, str, regs, error_code, NULL);            \
243 }
244
245 #define DO_ERROR_INFO(trapnr, signr, str, name, sicode, siaddr)         \
246 dotraplinkage void do_##name(struct pt_regs *regs, long error_code)     \
247 {                                                                       \
248         siginfo_t info;                                                 \
249         info.si_signo = signr;                                          \
250         info.si_errno = 0;                                              \
251         info.si_code = sicode;                                          \
252         info.si_addr = (void __user *)siaddr;                           \
253         if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, signr)  \
254                                                         == NOTIFY_STOP) \
255                 return;                                                 \
256         conditional_sti(regs);                                          \
257         do_trap(trapnr, signr, str, regs, error_code, &info);           \
258 }
259
260 DO_ERROR_INFO(0, SIGFPE, "divide error", divide_error, FPE_INTDIV, regs->ip)
261 DO_ERROR(4, SIGSEGV, "overflow", overflow)
262 DO_ERROR(5, SIGSEGV, "bounds", bounds)
263 DO_ERROR_INFO(6, SIGILL, "invalid opcode", invalid_op, ILL_ILLOPN, regs->ip)
264 DO_ERROR(9, SIGFPE, "coprocessor segment overrun", coprocessor_segment_overrun)
265 DO_ERROR(10, SIGSEGV, "invalid TSS", invalid_TSS)
266 DO_ERROR(11, SIGBUS, "segment not present", segment_not_present)
267 #ifdef CONFIG_X86_32
268 DO_ERROR(12, SIGBUS, "stack segment", stack_segment)
269 #endif
270 DO_ERROR_INFO(17, SIGBUS, "alignment check", alignment_check, BUS_ADRALN, 0)
271
272 #ifdef CONFIG_X86_64
273 /* Runs on IST stack */
274 dotraplinkage void do_stack_segment(struct pt_regs *regs, long error_code)
275 {
276         if (notify_die(DIE_TRAP, "stack segment", regs, error_code,
277                         12, SIGBUS) == NOTIFY_STOP)
278                 return;
279         preempt_conditional_sti(regs);
280         do_trap(12, SIGBUS, "stack segment", regs, error_code, NULL);
281         preempt_conditional_cli(regs);
282 }
283
284 dotraplinkage void do_double_fault(struct pt_regs *regs, long error_code)
285 {
286         static const char str[] = "double fault";
287         struct task_struct *tsk = current;
288
289         /* Return not checked because double check cannot be ignored */
290         notify_die(DIE_TRAP, str, regs, error_code, 8, SIGSEGV);
291
292         tsk->thread.error_code = error_code;
293         tsk->thread.trap_no = 8;
294
295         /* This is always a kernel trap and never fixable (and thus must
296            never return). */
297         for (;;)
298                 die(str, regs, error_code);
299 }
300 #endif
301
302 dotraplinkage void __kprobes
303 do_general_protection(struct pt_regs *regs, long error_code)
304 {
305         struct task_struct *tsk;
306
307         conditional_sti(regs);
308
309 #ifdef CONFIG_X86_32
310         if (lazy_iobitmap_copy()) {
311                 /* restart the faulting instruction */
312                 return;
313         }
314
315         if (regs->flags & X86_VM_MASK)
316                 goto gp_in_vm86;
317 #endif
318
319         tsk = current;
320         if (!user_mode(regs))
321                 goto gp_in_kernel;
322
323         tsk->thread.error_code = error_code;
324         tsk->thread.trap_no = 13;
325
326         if (show_unhandled_signals && unhandled_signal(tsk, SIGSEGV) &&
327                         printk_ratelimit()) {
328                 printk(KERN_INFO
329                         "%s[%d] general protection ip:%lx sp:%lx error:%lx",
330                         tsk->comm, task_pid_nr(tsk),
331                         regs->ip, regs->sp, error_code);
332                 print_vma_addr(" in ", regs->ip);
333                 printk("\n");
334         }
335
336         force_sig(SIGSEGV, tsk);
337         return;
338
339 #ifdef CONFIG_X86_32
340 gp_in_vm86:
341         local_irq_enable();
342         handle_vm86_fault((struct kernel_vm86_regs *) regs, error_code);
343         return;
344 #endif
345
346 gp_in_kernel:
347         if (fixup_exception(regs))
348                 return;
349
350         tsk->thread.error_code = error_code;
351         tsk->thread.trap_no = 13;
352         if (notify_die(DIE_GPF, "general protection fault", regs,
353                                 error_code, 13, SIGSEGV) == NOTIFY_STOP)
354                 return;
355         die("general protection fault", regs, error_code);
356 }
357
358 static notrace __kprobes void
359 mem_parity_error(unsigned char reason, struct pt_regs *regs)
360 {
361         printk(KERN_EMERG
362                 "Uhhuh. NMI received for unknown reason %02x on CPU %d.\n",
363                         reason, smp_processor_id());
364
365         printk(KERN_EMERG
366                 "You have some hardware problem, likely on the PCI bus.\n");
367
368 #if defined(CONFIG_EDAC)
369         if (edac_handler_set()) {
370                 edac_atomic_assert_error();
371                 return;
372         }
373 #endif
374
375         if (panic_on_unrecovered_nmi)
376                 panic("NMI: Not continuing");
377
378         printk(KERN_EMERG "Dazed and confused, but trying to continue\n");
379
380         /* Clear and disable the memory parity error line. */
381         reason = (reason & 0xf) | 4;
382         outb(reason, 0x61);
383 }
384
385 static notrace __kprobes void
386 io_check_error(unsigned char reason, struct pt_regs *regs)
387 {
388         unsigned long i;
389
390         printk(KERN_EMERG "NMI: IOCK error (debug interrupt?)\n");
391         show_registers(regs);
392
393         /* Re-enable the IOCK line, wait for a few seconds */
394         reason = (reason & 0xf) | 8;
395         outb(reason, 0x61);
396
397         i = 2000;
398         while (--i)
399                 udelay(1000);
400
401         reason &= ~8;
402         outb(reason, 0x61);
403 }
404
405 static notrace __kprobes void
406 unknown_nmi_error(unsigned char reason, struct pt_regs *regs)
407 {
408         if (notify_die(DIE_NMIUNKNOWN, "nmi", regs, reason, 2, SIGINT) ==
409                         NOTIFY_STOP)
410                 return;
411 #ifdef CONFIG_MCA
412         /*
413          * Might actually be able to figure out what the guilty party
414          * is:
415          */
416         if (MCA_bus) {
417                 mca_handle_nmi();
418                 return;
419         }
420 #endif
421         printk(KERN_EMERG
422                 "Uhhuh. NMI received for unknown reason %02x on CPU %d.\n",
423                         reason, smp_processor_id());
424
425         printk(KERN_EMERG "Do you have a strange power saving mode enabled?\n");
426         if (panic_on_unrecovered_nmi)
427                 panic("NMI: Not continuing");
428
429         printk(KERN_EMERG "Dazed and confused, but trying to continue\n");
430 }
431
432 static notrace __kprobes void default_do_nmi(struct pt_regs *regs)
433 {
434         unsigned char reason = 0;
435         int cpu;
436
437         cpu = smp_processor_id();
438
439         /* Only the BSP gets external NMIs from the system. */
440         if (!cpu)
441                 reason = get_nmi_reason();
442
443         if (!(reason & 0xc0)) {
444                 if (notify_die(DIE_NMI_IPI, "nmi_ipi", regs, reason, 2, SIGINT)
445                                                                 == NOTIFY_STOP)
446                         return;
447 #ifdef CONFIG_X86_LOCAL_APIC
448                 /*
449                  * Ok, so this is none of the documented NMI sources,
450                  * so it must be the NMI watchdog.
451                  */
452                 if (nmi_watchdog_tick(regs, reason))
453                         return;
454                 if (!do_nmi_callback(regs, cpu))
455                         unknown_nmi_error(reason, regs);
456 #else
457                 unknown_nmi_error(reason, regs);
458 #endif
459
460                 return;
461         }
462         if (notify_die(DIE_NMI, "nmi", regs, reason, 2, SIGINT) == NOTIFY_STOP)
463                 return;
464
465         /* AK: following checks seem to be broken on modern chipsets. FIXME */
466         if (reason & 0x80)
467                 mem_parity_error(reason, regs);
468         if (reason & 0x40)
469                 io_check_error(reason, regs);
470 #ifdef CONFIG_X86_32
471         /*
472          * Reassert NMI in case it became active meanwhile
473          * as it's edge-triggered:
474          */
475         reassert_nmi();
476 #endif
477 }
478
479 dotraplinkage notrace __kprobes void
480 do_nmi(struct pt_regs *regs, long error_code)
481 {
482         nmi_enter();
483
484         inc_irq_stat(__nmi_count);
485
486         if (!ignore_nmis)
487                 default_do_nmi(regs);
488
489         nmi_exit();
490 }
491
492 void stop_nmi(void)
493 {
494         acpi_nmi_disable();
495         ignore_nmis++;
496 }
497
498 void restart_nmi(void)
499 {
500         ignore_nmis--;
501         acpi_nmi_enable();
502 }
503
504 /* May run on IST stack. */
505 dotraplinkage void __kprobes do_int3(struct pt_regs *regs, long error_code)
506 {
507 #ifdef CONFIG_KPROBES
508         if (notify_die(DIE_INT3, "int3", regs, error_code, 3, SIGTRAP)
509                         == NOTIFY_STOP)
510                 return;
511 #else
512         if (notify_die(DIE_TRAP, "int3", regs, error_code, 3, SIGTRAP)
513                         == NOTIFY_STOP)
514                 return;
515 #endif
516
517         preempt_conditional_sti(regs);
518         do_trap(3, SIGTRAP, "int3", regs, error_code, NULL);
519         preempt_conditional_cli(regs);
520 }
521
522 #ifdef CONFIG_X86_64
523 /* Help handler running on IST stack to switch back to user stack
524    for scheduling or signal handling. The actual stack switch is done in
525    entry.S */
526 asmlinkage __kprobes struct pt_regs *sync_regs(struct pt_regs *eregs)
527 {
528         struct pt_regs *regs = eregs;
529         /* Did already sync */
530         if (eregs == (struct pt_regs *)eregs->sp)
531                 ;
532         /* Exception from user space */
533         else if (user_mode(eregs))
534                 regs = task_pt_regs(current);
535         /* Exception from kernel and interrupts are enabled. Move to
536            kernel process stack. */
537         else if (eregs->flags & X86_EFLAGS_IF)
538                 regs = (struct pt_regs *)(eregs->sp -= sizeof(struct pt_regs));
539         if (eregs != regs)
540                 *regs = *eregs;
541         return regs;
542 }
543 #endif
544
545 /*
546  * Our handling of the processor debug registers is non-trivial.
547  * We do not clear them on entry and exit from the kernel. Therefore
548  * it is possible to get a watchpoint trap here from inside the kernel.
549  * However, the code in ./ptrace.c has ensured that the user can
550  * only set watchpoints on userspace addresses. Therefore the in-kernel
551  * watchpoint trap can only occur in code which is reading/writing
552  * from user space. Such code must not hold kernel locks (since it
553  * can equally take a page fault), therefore it is safe to call
554  * force_sig_info even though that claims and releases locks.
555  *
556  * Code in ./signal.c ensures that the debug control register
557  * is restored before we deliver any signal, and therefore that
558  * user code runs with the correct debug control register even though
559  * we clear it here.
560  *
561  * Being careful here means that we don't have to be as careful in a
562  * lot of more complicated places (task switching can be a bit lazy
563  * about restoring all the debug state, and ptrace doesn't have to
564  * find every occurrence of the TF bit that could be saved away even
565  * by user code)
566  *
567  * May run on IST stack.
568  */
569 dotraplinkage void __kprobes do_debug(struct pt_regs *regs, long error_code)
570 {
571         struct task_struct *tsk = current;
572         unsigned long condition;
573         int si_code;
574
575         get_debugreg(condition, 6);
576
577         /*
578          * The processor cleared BTF, so don't mark that we need it set.
579          */
580         clear_tsk_thread_flag(tsk, TIF_DEBUGCTLMSR);
581         tsk->thread.debugctlmsr = 0;
582
583         if (notify_die(DIE_DEBUG, "debug", regs, condition, error_code,
584                                                 SIGTRAP) == NOTIFY_STOP)
585                 return;
586
587         /* It's safe to allow irq's after DR6 has been saved */
588         preempt_conditional_sti(regs);
589
590         /* Mask out spurious debug traps due to lazy DR7 setting */
591         if (condition & (DR_TRAP0|DR_TRAP1|DR_TRAP2|DR_TRAP3)) {
592                 if (!tsk->thread.debugreg7)
593                         goto clear_dr7;
594         }
595
596 #ifdef CONFIG_X86_32
597         if (regs->flags & X86_VM_MASK)
598                 goto debug_vm86;
599 #endif
600
601         /* Save debug status register where ptrace can see it */
602         tsk->thread.debugreg6 = condition;
603
604         /*
605          * Single-stepping through TF: make sure we ignore any events in
606          * kernel space (but re-enable TF when returning to user mode).
607          */
608         if (condition & DR_STEP) {
609                 if (!user_mode(regs))
610                         goto clear_TF_reenable;
611         }
612
613         si_code = get_si_code(condition);
614         /* Ok, finally something we can handle */
615         send_sigtrap(tsk, regs, error_code, si_code);
616
617         /*
618          * Disable additional traps. They'll be re-enabled when
619          * the signal is delivered.
620          */
621 clear_dr7:
622         set_debugreg(0, 7);
623         preempt_conditional_cli(regs);
624         return;
625
626 #ifdef CONFIG_X86_32
627 debug_vm86:
628         handle_vm86_trap((struct kernel_vm86_regs *) regs, error_code, 1);
629         preempt_conditional_cli(regs);
630         return;
631 #endif
632
633 clear_TF_reenable:
634         set_tsk_thread_flag(tsk, TIF_SINGLESTEP);
635         regs->flags &= ~X86_EFLAGS_TF;
636         preempt_conditional_cli(regs);
637         return;
638 }
639
640 #ifdef CONFIG_X86_64
641 static int kernel_math_error(struct pt_regs *regs, const char *str, int trapnr)
642 {
643         if (fixup_exception(regs))
644                 return 1;
645
646         notify_die(DIE_GPF, str, regs, 0, trapnr, SIGFPE);
647         /* Illegal floating point operation in the kernel */
648         current->thread.trap_no = trapnr;
649         die(str, regs, 0);
650         return 0;
651 }
652 #endif
653
654 /*
655  * Note that we play around with the 'TS' bit in an attempt to get
656  * the correct behaviour even in the presence of the asynchronous
657  * IRQ13 behaviour
658  */
659 void math_error(void __user *ip)
660 {
661         struct task_struct *task;
662         siginfo_t info;
663         unsigned short cwd, swd, err;
664
665         /*
666          * Save the info for the exception handler and clear the error.
667          */
668         task = current;
669         save_init_fpu(task);
670         task->thread.trap_no = 16;
671         task->thread.error_code = 0;
672         info.si_signo = SIGFPE;
673         info.si_errno = 0;
674         info.si_addr = ip;
675         /*
676          * (~cwd & swd) will mask out exceptions that are not set to unmasked
677          * status.  0x3f is the exception bits in these regs, 0x200 is the
678          * C1 reg you need in case of a stack fault, 0x040 is the stack
679          * fault bit.  We should only be taking one exception at a time,
680          * so if this combination doesn't produce any single exception,
681          * then we have a bad program that isn't synchronizing its FPU usage
682          * and it will suffer the consequences since we won't be able to
683          * fully reproduce the context of the exception
684          */
685         cwd = get_fpu_cwd(task);
686         swd = get_fpu_swd(task);
687
688         err = swd & ~cwd & 0x3f;
689
690 #ifdef CONFIG_X86_32
691         if (!err)
692                 return;
693 #endif
694
695         if (err & 0x001) {      /* Invalid op */
696                 /*
697                  * swd & 0x240 == 0x040: Stack Underflow
698                  * swd & 0x240 == 0x240: Stack Overflow
699                  * User must clear the SF bit (0x40) if set
700                  */
701                 info.si_code = FPE_FLTINV;
702         } else if (err & 0x004) { /* Divide by Zero */
703                 info.si_code = FPE_FLTDIV;
704         } else if (err & 0x008) { /* Overflow */
705                 info.si_code = FPE_FLTOVF;
706         } else if (err & 0x012) { /* Denormal, Underflow */
707                 info.si_code = FPE_FLTUND;
708         } else if (err & 0x020) { /* Precision */
709                 info.si_code = FPE_FLTRES;
710         } else {
711                 info.si_code = __SI_FAULT|SI_KERNEL; /* WTF? */
712         }
713         force_sig_info(SIGFPE, &info, task);
714 }
715
716 dotraplinkage void do_coprocessor_error(struct pt_regs *regs, long error_code)
717 {
718         conditional_sti(regs);
719
720 #ifdef CONFIG_X86_32
721         ignore_fpu_irq = 1;
722 #else
723         if (!user_mode(regs) &&
724             kernel_math_error(regs, "kernel x87 math error", 16))
725                 return;
726 #endif
727
728         math_error((void __user *)regs->ip);
729 }
730
731 static void simd_math_error(void __user *ip)
732 {
733         struct task_struct *task;
734         siginfo_t info;
735         unsigned short mxcsr;
736
737         /*
738          * Save the info for the exception handler and clear the error.
739          */
740         task = current;
741         save_init_fpu(task);
742         task->thread.trap_no = 19;
743         task->thread.error_code = 0;
744         info.si_signo = SIGFPE;
745         info.si_errno = 0;
746         info.si_code = __SI_FAULT;
747         info.si_addr = ip;
748         /*
749          * The SIMD FPU exceptions are handled a little differently, as there
750          * is only a single status/control register.  Thus, to determine which
751          * unmasked exception was caught we must mask the exception mask bits
752          * at 0x1f80, and then use these to mask the exception bits at 0x3f.
753          */
754         mxcsr = get_fpu_mxcsr(task);
755         switch (~((mxcsr & 0x1f80) >> 7) & (mxcsr & 0x3f)) {
756         case 0x000:
757         default:
758                 break;
759         case 0x001: /* Invalid Op */
760                 info.si_code = FPE_FLTINV;
761                 break;
762         case 0x002: /* Denormalize */
763         case 0x010: /* Underflow */
764                 info.si_code = FPE_FLTUND;
765                 break;
766         case 0x004: /* Zero Divide */
767                 info.si_code = FPE_FLTDIV;
768                 break;
769         case 0x008: /* Overflow */
770                 info.si_code = FPE_FLTOVF;
771                 break;
772         case 0x020: /* Precision */
773                 info.si_code = FPE_FLTRES;
774                 break;
775         }
776         force_sig_info(SIGFPE, &info, task);
777 }
778
779 dotraplinkage void
780 do_simd_coprocessor_error(struct pt_regs *regs, long error_code)
781 {
782         conditional_sti(regs);
783
784 #ifdef CONFIG_X86_32
785         if (cpu_has_xmm) {
786                 /* Handle SIMD FPU exceptions on PIII+ processors. */
787                 ignore_fpu_irq = 1;
788                 simd_math_error((void __user *)regs->ip);
789                 return;
790         }
791         /*
792          * Handle strange cache flush from user space exception
793          * in all other cases.  This is undocumented behaviour.
794          */
795         if (regs->flags & X86_VM_MASK) {
796                 handle_vm86_fault((struct kernel_vm86_regs *)regs, error_code);
797                 return;
798         }
799         current->thread.trap_no = 19;
800         current->thread.error_code = error_code;
801         die_if_kernel("cache flush denied", regs, error_code);
802         force_sig(SIGSEGV, current);
803 #else
804         if (!user_mode(regs) &&
805                         kernel_math_error(regs, "kernel simd math error", 19))
806                 return;
807         simd_math_error((void __user *)regs->ip);
808 #endif
809 }
810
811 dotraplinkage void
812 do_spurious_interrupt_bug(struct pt_regs *regs, long error_code)
813 {
814         conditional_sti(regs);
815 #if 0
816         /* No need to warn about this any longer. */
817         printk(KERN_INFO "Ignoring P6 Local APIC Spurious Interrupt Bug...\n");
818 #endif
819 }
820
821 #ifdef CONFIG_X86_32
822 unsigned long patch_espfix_desc(unsigned long uesp, unsigned long kesp)
823 {
824         struct desc_struct *gdt = get_cpu_gdt_table(smp_processor_id());
825         unsigned long base = (kesp - uesp) & -THREAD_SIZE;
826         unsigned long new_kesp = kesp - base;
827         unsigned long lim_pages = (new_kesp | (THREAD_SIZE - 1)) >> PAGE_SHIFT;
828         __u64 desc = *(__u64 *)&gdt[GDT_ENTRY_ESPFIX_SS];
829
830         /* Set up base for espfix segment */
831         desc &= 0x00f0ff0000000000ULL;
832         desc |= ((((__u64)base) << 16) & 0x000000ffffff0000ULL) |
833                 ((((__u64)base) << 32) & 0xff00000000000000ULL) |
834                 ((((__u64)lim_pages) << 32) & 0x000f000000000000ULL) |
835                 (lim_pages & 0xffff);
836         *(__u64 *)&gdt[GDT_ENTRY_ESPFIX_SS] = desc;
837
838         return new_kesp;
839 }
840 #else
841 asmlinkage void __attribute__((weak)) smp_thermal_interrupt(void)
842 {
843 }
844
845 asmlinkage void __attribute__((weak)) mce_threshold_interrupt(void)
846 {
847 }
848 #endif
849
850 /*
851  * 'math_state_restore()' saves the current math information in the
852  * old math state array, and gets the new ones from the current task
853  *
854  * Careful.. There are problems with IBM-designed IRQ13 behaviour.
855  * Don't touch unless you *really* know how it works.
856  *
857  * Must be called with kernel preemption disabled (in this case,
858  * local interrupts are disabled at the call-site in entry.S).
859  */
860 asmlinkage void math_state_restore(void)
861 {
862         struct thread_info *thread = current_thread_info();
863         struct task_struct *tsk = thread->task;
864
865         if (!tsk_used_math(tsk)) {
866                 local_irq_enable();
867                 /*
868                  * does a slab alloc which can sleep
869                  */
870                 if (init_fpu(tsk)) {
871                         /*
872                          * ran out of memory!
873                          */
874                         do_group_exit(SIGKILL);
875                         return;
876                 }
877                 local_irq_disable();
878         }
879
880         clts();                         /* Allow maths ops (or we recurse) */
881 #ifdef CONFIG_X86_32
882         restore_fpu(tsk);
883 #else
884         /*
885          * Paranoid restore. send a SIGSEGV if we fail to restore the state.
886          */
887         if (unlikely(restore_fpu_checking(tsk))) {
888                 stts();
889                 force_sig(SIGSEGV, tsk);
890                 return;
891         }
892 #endif
893         thread->status |= TS_USEDFPU;   /* So we fnsave on switch_to() */
894         tsk->fpu_counter++;
895 }
896 EXPORT_SYMBOL_GPL(math_state_restore);
897
898 #ifndef CONFIG_MATH_EMULATION
899 asmlinkage void math_emulate(long arg)
900 {
901         printk(KERN_EMERG
902                 "math-emulation not enabled and no coprocessor found.\n");
903         printk(KERN_EMERG "killing %s.\n", current->comm);
904         force_sig(SIGFPE, current);
905         schedule();
906 }
907 #endif /* CONFIG_MATH_EMULATION */
908
909 dotraplinkage void __kprobes
910 do_device_not_available(struct pt_regs *regs, long error)
911 {
912 #ifdef CONFIG_X86_32
913         if (read_cr0() & X86_CR0_EM) {
914                 conditional_sti(regs);
915                 math_emulate(0);
916         } else {
917                 math_state_restore(); /* interrupts still off */
918                 conditional_sti(regs);
919         }
920 #else
921         math_state_restore();
922 #endif
923 }
924
925 #ifdef CONFIG_X86_32
926 dotraplinkage void do_iret_error(struct pt_regs *regs, long error_code)
927 {
928         siginfo_t info;
929         local_irq_enable();
930
931         info.si_signo = SIGILL;
932         info.si_errno = 0;
933         info.si_code = ILL_BADSTK;
934         info.si_addr = 0;
935         if (notify_die(DIE_TRAP, "iret exception",
936                         regs, error_code, 32, SIGILL) == NOTIFY_STOP)
937                 return;
938         do_trap(32, SIGILL, "iret exception", regs, error_code, &info);
939 }
940 #endif
941
942 void __init trap_init(void)
943 {
944 #ifdef CONFIG_X86_32
945         int i;
946 #endif
947
948 #ifdef CONFIG_EISA
949         void __iomem *p = early_ioremap(0x0FFFD9, 4);
950
951         if (readl(p) == 'E' + ('I'<<8) + ('S'<<16) + ('A'<<24))
952                 EISA_bus = 1;
953         early_iounmap(p, 4);
954 #endif
955
956         set_intr_gate(0, &divide_error);
957         set_intr_gate_ist(1, &debug, DEBUG_STACK);
958         set_intr_gate_ist(2, &nmi, NMI_STACK);
959         /* int3 can be called from all */
960         set_system_intr_gate_ist(3, &int3, DEBUG_STACK);
961         /* int4 can be called from all */
962         set_system_intr_gate(4, &overflow);
963         set_intr_gate(5, &bounds);
964         set_intr_gate(6, &invalid_op);
965         set_intr_gate(7, &device_not_available);
966 #ifdef CONFIG_X86_32
967         set_task_gate(8, GDT_ENTRY_DOUBLEFAULT_TSS);
968 #else
969         set_intr_gate_ist(8, &double_fault, DOUBLEFAULT_STACK);
970 #endif
971         set_intr_gate(9, &coprocessor_segment_overrun);
972         set_intr_gate(10, &invalid_TSS);
973         set_intr_gate(11, &segment_not_present);
974         set_intr_gate_ist(12, &stack_segment, STACKFAULT_STACK);
975         set_intr_gate(13, &general_protection);
976         set_intr_gate(14, &page_fault);
977         set_intr_gate(15, &spurious_interrupt_bug);
978         set_intr_gate(16, &coprocessor_error);
979         set_intr_gate(17, &alignment_check);
980 #ifdef CONFIG_X86_MCE
981         set_intr_gate_ist(18, &machine_check, MCE_STACK);
982 #endif
983         set_intr_gate(19, &simd_coprocessor_error);
984
985 #ifdef CONFIG_IA32_EMULATION
986         set_system_intr_gate(IA32_SYSCALL_VECTOR, ia32_syscall);
987 #endif
988
989 #ifdef CONFIG_X86_32
990         if (cpu_has_fxsr) {
991                 printk(KERN_INFO "Enabling fast FPU save and restore... ");
992                 set_in_cr4(X86_CR4_OSFXSR);
993                 printk("done.\n");
994         }
995         if (cpu_has_xmm) {
996                 printk(KERN_INFO
997                         "Enabling unmasked SIMD FPU exception support... ");
998                 set_in_cr4(X86_CR4_OSXMMEXCPT);
999                 printk("done.\n");
1000         }
1001
1002         set_system_trap_gate(SYSCALL_VECTOR, &system_call);
1003
1004         /* Reserve all the builtin and the syscall vector: */
1005         for (i = 0; i < FIRST_EXTERNAL_VECTOR; i++)
1006                 set_bit(i, used_vectors);
1007
1008         set_bit(SYSCALL_VECTOR, used_vectors);
1009 #endif
1010         /*
1011          * Should be a barrier for any external CPU state:
1012          */
1013         cpu_init();
1014
1015 #ifdef CONFIG_X86_32
1016         trap_init_hook();
1017 #endif
1018 }