Merge commit 'v2.6.39-rc6' into x86/cleanups
[pandora-kernel.git] / arch / x86 / kernel / microcode_core.c
1 /*
2  *      Intel CPU Microcode Update Driver for Linux
3  *
4  *      Copyright (C) 2000-2006 Tigran Aivazian <tigran@aivazian.fsnet.co.uk>
5  *                    2006      Shaohua Li <shaohua.li@intel.com>
6  *
7  *      This driver allows to upgrade microcode on Intel processors
8  *      belonging to IA-32 family - PentiumPro, Pentium II,
9  *      Pentium III, Xeon, Pentium 4, etc.
10  *
11  *      Reference: Section 8.11 of Volume 3a, IA-32 Intel? Architecture
12  *      Software Developer's Manual
13  *      Order Number 253668 or free download from:
14  *
15  *      http://developer.intel.com/Assets/PDF/manual/253668.pdf 
16  *
17  *      For more information, go to http://www.urbanmyth.org/microcode
18  *
19  *      This program is free software; you can redistribute it and/or
20  *      modify it under the terms of the GNU General Public License
21  *      as published by the Free Software Foundation; either version
22  *      2 of the License, or (at your option) any later version.
23  *
24  *      1.0     16 Feb 2000, Tigran Aivazian <tigran@sco.com>
25  *              Initial release.
26  *      1.01    18 Feb 2000, Tigran Aivazian <tigran@sco.com>
27  *              Added read() support + cleanups.
28  *      1.02    21 Feb 2000, Tigran Aivazian <tigran@sco.com>
29  *              Added 'device trimming' support. open(O_WRONLY) zeroes
30  *              and frees the saved copy of applied microcode.
31  *      1.03    29 Feb 2000, Tigran Aivazian <tigran@sco.com>
32  *              Made to use devfs (/dev/cpu/microcode) + cleanups.
33  *      1.04    06 Jun 2000, Simon Trimmer <simon@veritas.com>
34  *              Added misc device support (now uses both devfs and misc).
35  *              Added MICROCODE_IOCFREE ioctl to clear memory.
36  *      1.05    09 Jun 2000, Simon Trimmer <simon@veritas.com>
37  *              Messages for error cases (non Intel & no suitable microcode).
38  *      1.06    03 Aug 2000, Tigran Aivazian <tigran@veritas.com>
39  *              Removed ->release(). Removed exclusive open and status bitmap.
40  *              Added microcode_rwsem to serialize read()/write()/ioctl().
41  *              Removed global kernel lock usage.
42  *      1.07    07 Sep 2000, Tigran Aivazian <tigran@veritas.com>
43  *              Write 0 to 0x8B msr and then cpuid before reading revision,
44  *              so that it works even if there were no update done by the
45  *              BIOS. Otherwise, reading from 0x8B gives junk (which happened
46  *              to be 0 on my machine which is why it worked even when I
47  *              disabled update by the BIOS)
48  *              Thanks to Eric W. Biederman <ebiederman@lnxi.com> for the fix.
49  *      1.08    11 Dec 2000, Richard Schaal <richard.schaal@intel.com> and
50  *                           Tigran Aivazian <tigran@veritas.com>
51  *              Intel Pentium 4 processor support and bugfixes.
52  *      1.09    30 Oct 2001, Tigran Aivazian <tigran@veritas.com>
53  *              Bugfix for HT (Hyper-Threading) enabled processors
54  *              whereby processor resources are shared by all logical processors
55  *              in a single CPU package.
56  *      1.10    28 Feb 2002 Asit K Mallick <asit.k.mallick@intel.com> and
57  *              Tigran Aivazian <tigran@veritas.com>,
58  *              Serialize updates as required on HT processors due to
59  *              speculative nature of implementation.
60  *      1.11    22 Mar 2002 Tigran Aivazian <tigran@veritas.com>
61  *              Fix the panic when writing zero-length microcode chunk.
62  *      1.12    29 Sep 2003 Nitin Kamble <nitin.a.kamble@intel.com>,
63  *              Jun Nakajima <jun.nakajima@intel.com>
64  *              Support for the microcode updates in the new format.
65  *      1.13    10 Oct 2003 Tigran Aivazian <tigran@veritas.com>
66  *              Removed ->read() method and obsoleted MICROCODE_IOCFREE ioctl
67  *              because we no longer hold a copy of applied microcode
68  *              in kernel memory.
69  *      1.14    25 Jun 2004 Tigran Aivazian <tigran@veritas.com>
70  *              Fix sigmatch() macro to handle old CPUs with pf == 0.
71  *              Thanks to Stuart Swales for pointing out this bug.
72  */
73
74 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
75
76 #include <linux/platform_device.h>
77 #include <linux/miscdevice.h>
78 #include <linux/capability.h>
79 #include <linux/kernel.h>
80 #include <linux/module.h>
81 #include <linux/mutex.h>
82 #include <linux/cpu.h>
83 #include <linux/fs.h>
84 #include <linux/mm.h>
85 #include <linux/syscore_ops.h>
86
87 #include <asm/microcode.h>
88 #include <asm/processor.h>
89
90 MODULE_DESCRIPTION("Microcode Update Driver");
91 MODULE_AUTHOR("Tigran Aivazian <tigran@aivazian.fsnet.co.uk>");
92 MODULE_LICENSE("GPL");
93
94 #define MICROCODE_VERSION       "2.00"
95
96 static struct microcode_ops     *microcode_ops;
97
98 /*
99  * Synchronization.
100  *
101  * All non cpu-hotplug-callback call sites use:
102  *
103  * - microcode_mutex to synchronize with each other;
104  * - get/put_online_cpus() to synchronize with
105  *   the cpu-hotplug-callback call sites.
106  *
107  * We guarantee that only a single cpu is being
108  * updated at any particular moment of time.
109  */
110 static DEFINE_MUTEX(microcode_mutex);
111
112 struct ucode_cpu_info           ucode_cpu_info[NR_CPUS];
113 EXPORT_SYMBOL_GPL(ucode_cpu_info);
114
115 /*
116  * Operations that are run on a target cpu:
117  */
118
119 struct cpu_info_ctx {
120         struct cpu_signature    *cpu_sig;
121         int                     err;
122 };
123
124 static void collect_cpu_info_local(void *arg)
125 {
126         struct cpu_info_ctx *ctx = arg;
127
128         ctx->err = microcode_ops->collect_cpu_info(smp_processor_id(),
129                                                    ctx->cpu_sig);
130 }
131
132 static int collect_cpu_info_on_target(int cpu, struct cpu_signature *cpu_sig)
133 {
134         struct cpu_info_ctx ctx = { .cpu_sig = cpu_sig, .err = 0 };
135         int ret;
136
137         ret = smp_call_function_single(cpu, collect_cpu_info_local, &ctx, 1);
138         if (!ret)
139                 ret = ctx.err;
140
141         return ret;
142 }
143
144 static int collect_cpu_info(int cpu)
145 {
146         struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
147         int ret;
148
149         memset(uci, 0, sizeof(*uci));
150
151         ret = collect_cpu_info_on_target(cpu, &uci->cpu_sig);
152         if (!ret)
153                 uci->valid = 1;
154
155         return ret;
156 }
157
158 struct apply_microcode_ctx {
159         int err;
160 };
161
162 static void apply_microcode_local(void *arg)
163 {
164         struct apply_microcode_ctx *ctx = arg;
165
166         ctx->err = microcode_ops->apply_microcode(smp_processor_id());
167 }
168
169 static int apply_microcode_on_target(int cpu)
170 {
171         struct apply_microcode_ctx ctx = { .err = 0 };
172         int ret;
173
174         ret = smp_call_function_single(cpu, apply_microcode_local, &ctx, 1);
175         if (!ret)
176                 ret = ctx.err;
177
178         return ret;
179 }
180
181 #ifdef CONFIG_MICROCODE_OLD_INTERFACE
182 static int do_microcode_update(const void __user *buf, size_t size)
183 {
184         int error = 0;
185         int cpu;
186
187         for_each_online_cpu(cpu) {
188                 struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
189                 enum ucode_state ustate;
190
191                 if (!uci->valid)
192                         continue;
193
194                 ustate = microcode_ops->request_microcode_user(cpu, buf, size);
195                 if (ustate == UCODE_ERROR) {
196                         error = -1;
197                         break;
198                 } else if (ustate == UCODE_OK)
199                         apply_microcode_on_target(cpu);
200         }
201
202         return error;
203 }
204
205 static int microcode_open(struct inode *inode, struct file *file)
206 {
207         return capable(CAP_SYS_RAWIO) ? nonseekable_open(inode, file) : -EPERM;
208 }
209
210 static ssize_t microcode_write(struct file *file, const char __user *buf,
211                                size_t len, loff_t *ppos)
212 {
213         ssize_t ret = -EINVAL;
214
215         if ((len >> PAGE_SHIFT) > totalram_pages) {
216                 pr_err("too much data (max %ld pages)\n", totalram_pages);
217                 return ret;
218         }
219
220         get_online_cpus();
221         mutex_lock(&microcode_mutex);
222
223         if (do_microcode_update(buf, len) == 0)
224                 ret = (ssize_t)len;
225
226         mutex_unlock(&microcode_mutex);
227         put_online_cpus();
228
229         return ret;
230 }
231
232 static const struct file_operations microcode_fops = {
233         .owner                  = THIS_MODULE,
234         .write                  = microcode_write,
235         .open                   = microcode_open,
236         .llseek         = no_llseek,
237 };
238
239 static struct miscdevice microcode_dev = {
240         .minor                  = MICROCODE_MINOR,
241         .name                   = "microcode",
242         .nodename               = "cpu/microcode",
243         .fops                   = &microcode_fops,
244 };
245
246 static int __init microcode_dev_init(void)
247 {
248         int error;
249
250         error = misc_register(&microcode_dev);
251         if (error) {
252                 pr_err("can't misc_register on minor=%d\n", MICROCODE_MINOR);
253                 return error;
254         }
255
256         return 0;
257 }
258
259 static void microcode_dev_exit(void)
260 {
261         misc_deregister(&microcode_dev);
262 }
263
264 MODULE_ALIAS_MISCDEV(MICROCODE_MINOR);
265 MODULE_ALIAS("devname:cpu/microcode");
266 #else
267 #define microcode_dev_init()    0
268 #define microcode_dev_exit()    do { } while (0)
269 #endif
270
271 /* fake device for request_firmware */
272 static struct platform_device   *microcode_pdev;
273
274 static int reload_for_cpu(int cpu)
275 {
276         struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
277         int err = 0;
278
279         mutex_lock(&microcode_mutex);
280         if (uci->valid) {
281                 enum ucode_state ustate;
282
283                 ustate = microcode_ops->request_microcode_fw(cpu, &microcode_pdev->dev);
284                 if (ustate == UCODE_OK)
285                         apply_microcode_on_target(cpu);
286                 else
287                         if (ustate == UCODE_ERROR)
288                                 err = -EINVAL;
289         }
290         mutex_unlock(&microcode_mutex);
291
292         return err;
293 }
294
295 static ssize_t reload_store(struct sys_device *dev,
296                             struct sysdev_attribute *attr,
297                             const char *buf, size_t size)
298 {
299         unsigned long val;
300         int cpu = dev->id;
301         int ret = 0;
302         char *end;
303
304         val = simple_strtoul(buf, &end, 0);
305         if (end == buf)
306                 return -EINVAL;
307
308         if (val == 1) {
309                 get_online_cpus();
310                 if (cpu_online(cpu))
311                         ret = reload_for_cpu(cpu);
312                 put_online_cpus();
313         }
314
315         if (!ret)
316                 ret = size;
317
318         return ret;
319 }
320
321 static ssize_t version_show(struct sys_device *dev,
322                         struct sysdev_attribute *attr, char *buf)
323 {
324         struct ucode_cpu_info *uci = ucode_cpu_info + dev->id;
325
326         return sprintf(buf, "0x%x\n", uci->cpu_sig.rev);
327 }
328
329 static ssize_t pf_show(struct sys_device *dev,
330                         struct sysdev_attribute *attr, char *buf)
331 {
332         struct ucode_cpu_info *uci = ucode_cpu_info + dev->id;
333
334         return sprintf(buf, "0x%x\n", uci->cpu_sig.pf);
335 }
336
337 static SYSDEV_ATTR(reload, 0200, NULL, reload_store);
338 static SYSDEV_ATTR(version, 0400, version_show, NULL);
339 static SYSDEV_ATTR(processor_flags, 0400, pf_show, NULL);
340
341 static struct attribute *mc_default_attrs[] = {
342         &attr_reload.attr,
343         &attr_version.attr,
344         &attr_processor_flags.attr,
345         NULL
346 };
347
348 static struct attribute_group mc_attr_group = {
349         .attrs                  = mc_default_attrs,
350         .name                   = "microcode",
351 };
352
353 static void microcode_fini_cpu(int cpu)
354 {
355         struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
356
357         microcode_ops->microcode_fini_cpu(cpu);
358         uci->valid = 0;
359 }
360
361 static enum ucode_state microcode_resume_cpu(int cpu)
362 {
363         struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
364
365         if (!uci->mc)
366                 return UCODE_NFOUND;
367
368         pr_debug("CPU%d updated upon resume\n", cpu);
369         apply_microcode_on_target(cpu);
370
371         return UCODE_OK;
372 }
373
374 static enum ucode_state microcode_init_cpu(int cpu)
375 {
376         enum ucode_state ustate;
377
378         if (collect_cpu_info(cpu))
379                 return UCODE_ERROR;
380
381         /* --dimm. Trigger a delayed update? */
382         if (system_state != SYSTEM_RUNNING)
383                 return UCODE_NFOUND;
384
385         ustate = microcode_ops->request_microcode_fw(cpu, &microcode_pdev->dev);
386
387         if (ustate == UCODE_OK) {
388                 pr_debug("CPU%d updated upon init\n", cpu);
389                 apply_microcode_on_target(cpu);
390         }
391
392         return ustate;
393 }
394
395 static enum ucode_state microcode_update_cpu(int cpu)
396 {
397         struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
398         enum ucode_state ustate;
399
400         if (uci->valid)
401                 ustate = microcode_resume_cpu(cpu);
402         else
403                 ustate = microcode_init_cpu(cpu);
404
405         return ustate;
406 }
407
408 static int mc_sysdev_add(struct sys_device *sys_dev)
409 {
410         int err, cpu = sys_dev->id;
411
412         if (!cpu_online(cpu))
413                 return 0;
414
415         pr_debug("CPU%d added\n", cpu);
416
417         err = sysfs_create_group(&sys_dev->kobj, &mc_attr_group);
418         if (err)
419                 return err;
420
421         if (microcode_init_cpu(cpu) == UCODE_ERROR) {
422                 sysfs_remove_group(&sys_dev->kobj, &mc_attr_group);
423                 return -EINVAL;
424         }
425
426         return err;
427 }
428
429 static int mc_sysdev_remove(struct sys_device *sys_dev)
430 {
431         int cpu = sys_dev->id;
432
433         if (!cpu_online(cpu))
434                 return 0;
435
436         pr_debug("CPU%d removed\n", cpu);
437         microcode_fini_cpu(cpu);
438         sysfs_remove_group(&sys_dev->kobj, &mc_attr_group);
439         return 0;
440 }
441
442 static struct sysdev_driver mc_sysdev_driver = {
443         .add                    = mc_sysdev_add,
444         .remove                 = mc_sysdev_remove,
445 };
446
447 /**
448  * mc_bp_resume - Update boot CPU microcode during resume.
449  */
450 static void mc_bp_resume(void)
451 {
452         int cpu = smp_processor_id();
453         struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
454
455         if (uci->valid && uci->mc)
456                 microcode_ops->apply_microcode(cpu);
457 }
458
459 static struct syscore_ops mc_syscore_ops = {
460         .resume                 = mc_bp_resume,
461 };
462
463 static __cpuinit int
464 mc_cpu_callback(struct notifier_block *nb, unsigned long action, void *hcpu)
465 {
466         unsigned int cpu = (unsigned long)hcpu;
467         struct sys_device *sys_dev;
468
469         sys_dev = get_cpu_sysdev(cpu);
470         switch (action) {
471         case CPU_ONLINE:
472         case CPU_ONLINE_FROZEN:
473                 microcode_update_cpu(cpu);
474         case CPU_DOWN_FAILED:
475         case CPU_DOWN_FAILED_FROZEN:
476                 pr_debug("CPU%d added\n", cpu);
477                 if (sysfs_create_group(&sys_dev->kobj, &mc_attr_group))
478                         pr_err("Failed to create group for CPU%d\n", cpu);
479                 break;
480         case CPU_DOWN_PREPARE:
481         case CPU_DOWN_PREPARE_FROZEN:
482                 /* Suspend is in progress, only remove the interface */
483                 sysfs_remove_group(&sys_dev->kobj, &mc_attr_group);
484                 pr_debug("CPU%d removed\n", cpu);
485                 break;
486         case CPU_DEAD:
487         case CPU_UP_CANCELED_FROZEN:
488                 /* The CPU refused to come up during a system resume */
489                 microcode_fini_cpu(cpu);
490                 break;
491         }
492         return NOTIFY_OK;
493 }
494
495 static struct notifier_block __refdata mc_cpu_notifier = {
496         .notifier_call  = mc_cpu_callback,
497 };
498
499 static int __init microcode_init(void)
500 {
501         struct cpuinfo_x86 *c = &cpu_data(0);
502         int error;
503
504         if (c->x86_vendor == X86_VENDOR_INTEL)
505                 microcode_ops = init_intel_microcode();
506         else if (c->x86_vendor == X86_VENDOR_AMD)
507                 microcode_ops = init_amd_microcode();
508
509         if (!microcode_ops) {
510                 pr_err("no support for this CPU vendor\n");
511                 return -ENODEV;
512         }
513
514         microcode_pdev = platform_device_register_simple("microcode", -1,
515                                                          NULL, 0);
516         if (IS_ERR(microcode_pdev)) {
517                 microcode_dev_exit();
518                 return PTR_ERR(microcode_pdev);
519         }
520
521         get_online_cpus();
522         mutex_lock(&microcode_mutex);
523
524         error = sysdev_driver_register(&cpu_sysdev_class, &mc_sysdev_driver);
525
526         mutex_unlock(&microcode_mutex);
527         put_online_cpus();
528
529         if (error) {
530                 platform_device_unregister(microcode_pdev);
531                 return error;
532         }
533
534         error = microcode_dev_init();
535         if (error)
536                 return error;
537
538         register_syscore_ops(&mc_syscore_ops);
539         register_hotcpu_notifier(&mc_cpu_notifier);
540
541         pr_info("Microcode Update Driver: v" MICROCODE_VERSION
542                 " <tigran@aivazian.fsnet.co.uk>, Peter Oruba\n");
543
544         return 0;
545 }
546 module_init(microcode_init);
547
548 static void __exit microcode_exit(void)
549 {
550         microcode_dev_exit();
551
552         unregister_hotcpu_notifier(&mc_cpu_notifier);
553         unregister_syscore_ops(&mc_syscore_ops);
554
555         get_online_cpus();
556         mutex_lock(&microcode_mutex);
557
558         sysdev_driver_unregister(&cpu_sysdev_class, &mc_sysdev_driver);
559
560         mutex_unlock(&microcode_mutex);
561         put_online_cpus();
562
563         platform_device_unregister(microcode_pdev);
564
565         microcode_ops = NULL;
566
567         pr_info("Microcode Update Driver: v" MICROCODE_VERSION " removed.\n");
568 }
569 module_exit(microcode_exit);