Merge branch 'sh/smp'
[pandora-kernel.git] / arch / x86 / kernel / i8259.c
1 #include <linux/linkage.h>
2 #include <linux/errno.h>
3 #include <linux/signal.h>
4 #include <linux/sched.h>
5 #include <linux/ioport.h>
6 #include <linux/interrupt.h>
7 #include <linux/timex.h>
8 #include <linux/random.h>
9 #include <linux/init.h>
10 #include <linux/kernel_stat.h>
11 #include <linux/sysdev.h>
12 #include <linux/bitops.h>
13 #include <linux/acpi.h>
14 #include <linux/io.h>
15 #include <linux/delay.h>
16
17 #include <asm/atomic.h>
18 #include <asm/system.h>
19 #include <asm/timer.h>
20 #include <asm/hw_irq.h>
21 #include <asm/pgtable.h>
22 #include <asm/desc.h>
23 #include <asm/apic.h>
24 #include <asm/i8259.h>
25
26 /*
27  * This is the 'legacy' 8259A Programmable Interrupt Controller,
28  * present in the majority of PC/AT boxes.
29  * plus some generic x86 specific things if generic specifics makes
30  * any sense at all.
31  */
32
33 static int i8259A_auto_eoi;
34 DEFINE_RAW_SPINLOCK(i8259A_lock);
35 static void mask_and_ack_8259A(unsigned int);
36 static void mask_8259A(void);
37 static void unmask_8259A(void);
38 static void disable_8259A_irq(unsigned int irq);
39 static void enable_8259A_irq(unsigned int irq);
40 static void init_8259A(int auto_eoi);
41 static int i8259A_irq_pending(unsigned int irq);
42
43 struct irq_chip i8259A_chip = {
44         .name           = "XT-PIC",
45         .mask           = disable_8259A_irq,
46         .disable        = disable_8259A_irq,
47         .unmask         = enable_8259A_irq,
48         .mask_ack       = mask_and_ack_8259A,
49 };
50
51 /*
52  * 8259A PIC functions to handle ISA devices:
53  */
54
55 /*
56  * This contains the irq mask for both 8259A irq controllers,
57  */
58 unsigned int cached_irq_mask = 0xffff;
59
60 /*
61  * Not all IRQs can be routed through the IO-APIC, eg. on certain (older)
62  * boards the timer interrupt is not really connected to any IO-APIC pin,
63  * it's fed to the master 8259A's IR0 line only.
64  *
65  * Any '1' bit in this mask means the IRQ is routed through the IO-APIC.
66  * this 'mixed mode' IRQ handling costs nothing because it's only used
67  * at IRQ setup time.
68  */
69 unsigned long io_apic_irqs;
70
71 static void disable_8259A_irq(unsigned int irq)
72 {
73         unsigned int mask = 1 << irq;
74         unsigned long flags;
75
76         raw_spin_lock_irqsave(&i8259A_lock, flags);
77         cached_irq_mask |= mask;
78         if (irq & 8)
79                 outb(cached_slave_mask, PIC_SLAVE_IMR);
80         else
81                 outb(cached_master_mask, PIC_MASTER_IMR);
82         raw_spin_unlock_irqrestore(&i8259A_lock, flags);
83 }
84
85 static void enable_8259A_irq(unsigned int irq)
86 {
87         unsigned int mask = ~(1 << irq);
88         unsigned long flags;
89
90         raw_spin_lock_irqsave(&i8259A_lock, flags);
91         cached_irq_mask &= mask;
92         if (irq & 8)
93                 outb(cached_slave_mask, PIC_SLAVE_IMR);
94         else
95                 outb(cached_master_mask, PIC_MASTER_IMR);
96         raw_spin_unlock_irqrestore(&i8259A_lock, flags);
97 }
98
99 static int i8259A_irq_pending(unsigned int irq)
100 {
101         unsigned int mask = 1<<irq;
102         unsigned long flags;
103         int ret;
104
105         raw_spin_lock_irqsave(&i8259A_lock, flags);
106         if (irq < 8)
107                 ret = inb(PIC_MASTER_CMD) & mask;
108         else
109                 ret = inb(PIC_SLAVE_CMD) & (mask >> 8);
110         raw_spin_unlock_irqrestore(&i8259A_lock, flags);
111
112         return ret;
113 }
114
115 static void make_8259A_irq(unsigned int irq)
116 {
117         disable_irq_nosync(irq);
118         io_apic_irqs &= ~(1<<irq);
119         set_irq_chip_and_handler_name(irq, &i8259A_chip, handle_level_irq,
120                                       "XT");
121         enable_irq(irq);
122 }
123
124 /*
125  * This function assumes to be called rarely. Switching between
126  * 8259A registers is slow.
127  * This has to be protected by the irq controller spinlock
128  * before being called.
129  */
130 static inline int i8259A_irq_real(unsigned int irq)
131 {
132         int value;
133         int irqmask = 1<<irq;
134
135         if (irq < 8) {
136                 outb(0x0B, PIC_MASTER_CMD);     /* ISR register */
137                 value = inb(PIC_MASTER_CMD) & irqmask;
138                 outb(0x0A, PIC_MASTER_CMD);     /* back to the IRR register */
139                 return value;
140         }
141         outb(0x0B, PIC_SLAVE_CMD);      /* ISR register */
142         value = inb(PIC_SLAVE_CMD) & (irqmask >> 8);
143         outb(0x0A, PIC_SLAVE_CMD);      /* back to the IRR register */
144         return value;
145 }
146
147 /*
148  * Careful! The 8259A is a fragile beast, it pretty
149  * much _has_ to be done exactly like this (mask it
150  * first, _then_ send the EOI, and the order of EOI
151  * to the two 8259s is important!
152  */
153 static void mask_and_ack_8259A(unsigned int irq)
154 {
155         unsigned int irqmask = 1 << irq;
156         unsigned long flags;
157
158         raw_spin_lock_irqsave(&i8259A_lock, flags);
159         /*
160          * Lightweight spurious IRQ detection. We do not want
161          * to overdo spurious IRQ handling - it's usually a sign
162          * of hardware problems, so we only do the checks we can
163          * do without slowing down good hardware unnecessarily.
164          *
165          * Note that IRQ7 and IRQ15 (the two spurious IRQs
166          * usually resulting from the 8259A-1|2 PICs) occur
167          * even if the IRQ is masked in the 8259A. Thus we
168          * can check spurious 8259A IRQs without doing the
169          * quite slow i8259A_irq_real() call for every IRQ.
170          * This does not cover 100% of spurious interrupts,
171          * but should be enough to warn the user that there
172          * is something bad going on ...
173          */
174         if (cached_irq_mask & irqmask)
175                 goto spurious_8259A_irq;
176         cached_irq_mask |= irqmask;
177
178 handle_real_irq:
179         if (irq & 8) {
180                 inb(PIC_SLAVE_IMR);     /* DUMMY - (do we need this?) */
181                 outb(cached_slave_mask, PIC_SLAVE_IMR);
182                 /* 'Specific EOI' to slave */
183                 outb(0x60+(irq&7), PIC_SLAVE_CMD);
184                  /* 'Specific EOI' to master-IRQ2 */
185                 outb(0x60+PIC_CASCADE_IR, PIC_MASTER_CMD);
186         } else {
187                 inb(PIC_MASTER_IMR);    /* DUMMY - (do we need this?) */
188                 outb(cached_master_mask, PIC_MASTER_IMR);
189                 outb(0x60+irq, PIC_MASTER_CMD); /* 'Specific EOI to master */
190         }
191         raw_spin_unlock_irqrestore(&i8259A_lock, flags);
192         return;
193
194 spurious_8259A_irq:
195         /*
196          * this is the slow path - should happen rarely.
197          */
198         if (i8259A_irq_real(irq))
199                 /*
200                  * oops, the IRQ _is_ in service according to the
201                  * 8259A - not spurious, go handle it.
202                  */
203                 goto handle_real_irq;
204
205         {
206                 static int spurious_irq_mask;
207                 /*
208                  * At this point we can be sure the IRQ is spurious,
209                  * lets ACK and report it. [once per IRQ]
210                  */
211                 if (!(spurious_irq_mask & irqmask)) {
212                         printk(KERN_DEBUG
213                                "spurious 8259A interrupt: IRQ%d.\n", irq);
214                         spurious_irq_mask |= irqmask;
215                 }
216                 atomic_inc(&irq_err_count);
217                 /*
218                  * Theoretically we do not have to handle this IRQ,
219                  * but in Linux this does not cause problems and is
220                  * simpler for us.
221                  */
222                 goto handle_real_irq;
223         }
224 }
225
226 static char irq_trigger[2];
227 /**
228  * ELCR registers (0x4d0, 0x4d1) control edge/level of IRQ
229  */
230 static void restore_ELCR(char *trigger)
231 {
232         outb(trigger[0], 0x4d0);
233         outb(trigger[1], 0x4d1);
234 }
235
236 static void save_ELCR(char *trigger)
237 {
238         /* IRQ 0,1,2,8,13 are marked as reserved */
239         trigger[0] = inb(0x4d0) & 0xF8;
240         trigger[1] = inb(0x4d1) & 0xDE;
241 }
242
243 static int i8259A_resume(struct sys_device *dev)
244 {
245         init_8259A(i8259A_auto_eoi);
246         restore_ELCR(irq_trigger);
247         return 0;
248 }
249
250 static int i8259A_suspend(struct sys_device *dev, pm_message_t state)
251 {
252         save_ELCR(irq_trigger);
253         return 0;
254 }
255
256 static int i8259A_shutdown(struct sys_device *dev)
257 {
258         /* Put the i8259A into a quiescent state that
259          * the kernel initialization code can get it
260          * out of.
261          */
262         outb(0xff, PIC_MASTER_IMR);     /* mask all of 8259A-1 */
263         outb(0xff, PIC_SLAVE_IMR);      /* mask all of 8259A-1 */
264         return 0;
265 }
266
267 static struct sysdev_class i8259_sysdev_class = {
268         .name = "i8259",
269         .suspend = i8259A_suspend,
270         .resume = i8259A_resume,
271         .shutdown = i8259A_shutdown,
272 };
273
274 static struct sys_device device_i8259A = {
275         .id     = 0,
276         .cls    = &i8259_sysdev_class,
277 };
278
279 static int __init i8259A_init_sysfs(void)
280 {
281         int error = sysdev_class_register(&i8259_sysdev_class);
282         if (!error)
283                 error = sysdev_register(&device_i8259A);
284         return error;
285 }
286
287 device_initcall(i8259A_init_sysfs);
288
289 static void mask_8259A(void)
290 {
291         unsigned long flags;
292
293         raw_spin_lock_irqsave(&i8259A_lock, flags);
294
295         outb(0xff, PIC_MASTER_IMR);     /* mask all of 8259A-1 */
296         outb(0xff, PIC_SLAVE_IMR);      /* mask all of 8259A-2 */
297
298         raw_spin_unlock_irqrestore(&i8259A_lock, flags);
299 }
300
301 static void unmask_8259A(void)
302 {
303         unsigned long flags;
304
305         raw_spin_lock_irqsave(&i8259A_lock, flags);
306
307         outb(cached_master_mask, PIC_MASTER_IMR); /* restore master IRQ mask */
308         outb(cached_slave_mask, PIC_SLAVE_IMR);   /* restore slave IRQ mask */
309
310         raw_spin_unlock_irqrestore(&i8259A_lock, flags);
311 }
312
313 static void init_8259A(int auto_eoi)
314 {
315         unsigned long flags;
316
317         i8259A_auto_eoi = auto_eoi;
318
319         raw_spin_lock_irqsave(&i8259A_lock, flags);
320
321         outb(0xff, PIC_MASTER_IMR);     /* mask all of 8259A-1 */
322         outb(0xff, PIC_SLAVE_IMR);      /* mask all of 8259A-2 */
323
324         /*
325          * outb_pic - this has to work on a wide range of PC hardware.
326          */
327         outb_pic(0x11, PIC_MASTER_CMD); /* ICW1: select 8259A-1 init */
328
329         /* ICW2: 8259A-1 IR0-7 mapped to 0x30-0x37 on x86-64,
330            to 0x20-0x27 on i386 */
331         outb_pic(IRQ0_VECTOR, PIC_MASTER_IMR);
332
333         /* 8259A-1 (the master) has a slave on IR2 */
334         outb_pic(1U << PIC_CASCADE_IR, PIC_MASTER_IMR);
335
336         if (auto_eoi)   /* master does Auto EOI */
337                 outb_pic(MASTER_ICW4_DEFAULT | PIC_ICW4_AEOI, PIC_MASTER_IMR);
338         else            /* master expects normal EOI */
339                 outb_pic(MASTER_ICW4_DEFAULT, PIC_MASTER_IMR);
340
341         outb_pic(0x11, PIC_SLAVE_CMD);  /* ICW1: select 8259A-2 init */
342
343         /* ICW2: 8259A-2 IR0-7 mapped to IRQ8_VECTOR */
344         outb_pic(IRQ8_VECTOR, PIC_SLAVE_IMR);
345         /* 8259A-2 is a slave on master's IR2 */
346         outb_pic(PIC_CASCADE_IR, PIC_SLAVE_IMR);
347         /* (slave's support for AEOI in flat mode is to be investigated) */
348         outb_pic(SLAVE_ICW4_DEFAULT, PIC_SLAVE_IMR);
349
350         if (auto_eoi)
351                 /*
352                  * In AEOI mode we just have to mask the interrupt
353                  * when acking.
354                  */
355                 i8259A_chip.mask_ack = disable_8259A_irq;
356         else
357                 i8259A_chip.mask_ack = mask_and_ack_8259A;
358
359         udelay(100);            /* wait for 8259A to initialize */
360
361         outb(cached_master_mask, PIC_MASTER_IMR); /* restore master IRQ mask */
362         outb(cached_slave_mask, PIC_SLAVE_IMR);   /* restore slave IRQ mask */
363
364         raw_spin_unlock_irqrestore(&i8259A_lock, flags);
365 }
366
367 /*
368  * make i8259 a driver so that we can select pic functions at run time. the goal
369  * is to make x86 binary compatible among pc compatible and non-pc compatible
370  * platforms, such as x86 MID.
371  */
372
373 static void legacy_pic_noop(void) { };
374 static void legacy_pic_uint_noop(unsigned int unused) { };
375 static void legacy_pic_int_noop(int unused) { };
376
377 static struct irq_chip dummy_pic_chip  = {
378         .name = "dummy pic",
379         .mask = legacy_pic_uint_noop,
380         .unmask = legacy_pic_uint_noop,
381         .disable = legacy_pic_uint_noop,
382         .mask_ack = legacy_pic_uint_noop,
383 };
384 static int legacy_pic_irq_pending_noop(unsigned int irq)
385 {
386         return 0;
387 }
388
389 struct legacy_pic null_legacy_pic = {
390         .nr_legacy_irqs = 0,
391         .chip = &dummy_pic_chip,
392         .mask_all = legacy_pic_noop,
393         .restore_mask = legacy_pic_noop,
394         .init = legacy_pic_int_noop,
395         .irq_pending = legacy_pic_irq_pending_noop,
396         .make_irq = legacy_pic_uint_noop,
397 };
398
399 struct legacy_pic default_legacy_pic = {
400         .nr_legacy_irqs = NR_IRQS_LEGACY,
401         .chip  = &i8259A_chip,
402         .mask_all  = mask_8259A,
403         .restore_mask = unmask_8259A,
404         .init = init_8259A,
405         .irq_pending = i8259A_irq_pending,
406         .make_irq = make_8259A_irq,
407 };
408
409 struct legacy_pic *legacy_pic = &default_legacy_pic;