arch/ppc/platforms/katana.h

   1 /*
   2  * Definitions for Artesyn Katana750i/3750 board.
   3  *
   4  * Author: Tim Montgomery <timm@artesyncp.com>
   5  * Maintained by: Mark A. Greer <mgreer@mvista.com>
   6  *
   7  * Based on code done by Rabeeh Khoury - rabeeh@galileo.co.il
   8  * Based on code done by Mark A. Greer <mgreer@mvista.com>
   9  *
  10  * This program is free software; you can redistribute it and/or modify it
  11  * under the terms of the GNU General Public License as published by the
  12  * Free Software Foundation; either version 2 of the License, or (at your
  13  * option) any later version.
  14  */
  15
  16 /*
  17  * The MV64360 has 2 PCI buses each with 1 window from the CPU bus to
  18  * PCI I/O space and 4 windows from the CPU bus to PCI MEM space.
  19  * We'll only use one PCI MEM window on each PCI bus.
  20  *
  21  * This is the CPU physical memory map (windows must be at least 64 KB and start
  22  * on a boundary that is a multiple of the window size):
  23  *
  24  *    0xff800000-0xffffffff      - Boot window
  25  *    0xf8400000-0xf843ffff      - Internal SRAM
  26  *    0xf8200000-0xf83fffff      - CPLD
  27  *    0xf8100000-0xf810ffff      - MV64360 Registers (CONFIG_MV64X60_NEW_BASE)
  28  *    0xf8000000-0xf80fffff      - Socketed FLASH
  29  *    0xe0000000-0xefffffff      - Soldered FLASH
  30  *    0xc0000000-0xc3ffffff      - PCI I/O (second hose)
  31  *    0x80000000-0xbfffffff      - PCI MEM (second hose)
  32  */
  33
  34 #ifndef __PPC_PLATFORMS_KATANA_H
  35 #define __PPC_PLATFORMS_KATANA_H
  36
  37 /* CPU Physical Memory Map setup. */
  38 #define KATANA_BOOT_WINDOW_BASE                 0xff800000
  39 #define KATANA_BOOT_WINDOW_SIZE                 0x00800000 /* 8 MB */
  40 #define KATANA_INTERNAL_SRAM_BASE               0xf8400000
  41 #define KATANA_CPLD_BASE                        0xf8200000
  42 #define KATANA_CPLD_SIZE                        0x00200000 /* 2 MB */
  43 #define KATANA_SOCKET_BASE                      0xf8000000
  44 #define KATANA_SOCKETED_FLASH_SIZE              0x00100000 /* 1 MB */
  45 #define KATANA_SOLDERED_FLASH_BASE              0xe0000000
  46 #define KATANA_SOLDERED_FLASH_SIZE              0x10000000 /* 256 MB */
  47
  48 #define KATANA_PCI1_MEM_START_PROC_ADDR         0x80000000
  49 #define KATANA_PCI1_MEM_START_PCI_HI_ADDR       0x00000000
  50 #define KATANA_PCI1_MEM_START_PCI_LO_ADDR       0x80000000
  51 #define KATANA_PCI1_MEM_SIZE                    0x40000000 /* 1 GB */
  52 #define KATANA_PCI1_IO_START_PROC_ADDR          0xc0000000
  53 #define KATANA_PCI1_IO_START_PCI_ADDR           0x00000000
  54 #define KATANA_PCI1_IO_SIZE                     0x04000000 /* 64 MB */
  55
  56 /* Board-specific IRQ info */
  57 #define  KATANA_PCI_INTA_IRQ_3750               (64+8)
  58 #define  KATANA_PCI_INTB_IRQ_3750               (64+9)
  59 #define  KATANA_PCI_INTC_IRQ_3750               (64+10)
  60
  61 #define  KATANA_PCI_INTA_IRQ_750i               (64+8)
  62 #define  KATANA_PCI_INTB_IRQ_750i               (64+9)
  63 #define  KATANA_PCI_INTC_IRQ_750i               (64+10)
  64 #define  KATANA_PCI_INTD_IRQ_750i               (64+14)
  65
  66 #define KATANA_CPLD_RST_EVENT                   0x00000000
  67 #define KATANA_CPLD_RST_CMD                     0x00001000
  68 #define KATANA_CPLD_PCI_ERR_INT_EN              0x00002000
  69 #define KATANA_CPLD_PCI_ERR_INT_PEND            0x00003000
  70 #define KATANA_CPLD_PRODUCT_ID                  0x00004000
  71 #define KATANA_CPLD_EREADY                      0x00005000
  72
  73 #define KATANA_CPLD_HARDWARE_VER                0x00007000
  74 #define KATANA_CPLD_PLD_VER                     0x00008000
  75 #define KATANA_CPLD_BD_CFG_0                    0x00009000
  76 #define KATANA_CPLD_BD_CFG_1                    0x0000a000
  77 #define KATANA_CPLD_BD_CFG_3                    0x0000c000
  78 #define KATANA_CPLD_LED                         0x0000d000
  79 #define KATANA_CPLD_RESET_OUT                   0x0000e000
  80
  81 #define KATANA_CPLD_RST_EVENT_INITACT           0x80
  82 #define KATANA_CPLD_RST_EVENT_SW                0x40
  83 #define KATANA_CPLD_RST_EVENT_WD                0x20
  84 #define KATANA_CPLD_RST_EVENT_COPS              0x10
  85 #define KATANA_CPLD_RST_EVENT_COPH              0x08
  86 #define KATANA_CPLD_RST_EVENT_CPCI              0x02
  87 #define KATANA_CPLD_RST_EVENT_FP                0x01
  88
  89 #define KATANA_CPLD_RST_CMD_SCL                 0x80
  90 #define KATANA_CPLD_RST_CMD_SDA                 0x40
  91 #define KATANA_CPLD_RST_CMD_I2C                 0x10
  92 #define KATANA_CPLD_RST_CMD_FR                  0x08
  93 #define KATANA_CPLD_RST_CMD_SR                  0x04
  94 #define KATANA_CPLD_RST_CMD_HR                  0x01
  95
  96 #define KATANA_CPLD_BD_CFG_0_SYSCLK_MASK        0xc0
  97 #define KATANA_CPLD_BD_CFG_0_SYSCLK_200         0x00
  98 #define KATANA_CPLD_BD_CFG_0_SYSCLK_166         0x80
  99 #define KATANA_CPLD_BD_CFG_0_SYSCLK_133         0xc0
 100 #define KATANA_CPLD_BD_CFG_0_SYSCLK_100         0x40
 101
 102 #define KATANA_CPLD_BD_CFG_1_FL_BANK_MASK       0x03
 103 #define KATANA_CPLD_BD_CFG_1_FL_BANK_16MB       0x00
 104 #define KATANA_CPLD_BD_CFG_1_FL_BANK_32MB       0x01
 105 #define KATANA_CPLD_BD_CFG_1_FL_BANK_64MB       0x02
 106 #define KATANA_CPLD_BD_CFG_1_FL_BANK_128MB      0x03
 107
 108 #define KATANA_CPLD_BD_CFG_1_FL_NUM_BANKS_MASK  0x04
 109 #define KATANA_CPLD_BD_CFG_1_FL_NUM_BANKS_ONE   0x00
 110 #define KATANA_CPLD_BD_CFG_1_FL_NUM_BANKS_TWO   0x04
 111
 112 #define KATANA_CPLD_BD_CFG_3_MONARCH            0x04
 113
 114 #define KATANA_CPLD_RESET_OUT_PORTSEL           0x80
 115 #define KATANA_CPLD_RESET_OUT_WD                0x20
 116 #define KATANA_CPLD_RESET_OUT_COPH              0x08
 117 #define KATANA_CPLD_RESET_OUT_PCI_RST_PCI       0x02
 118 #define KATANA_CPLD_RESET_OUT_PCI_RST_FP        0x01
 119
 120 #define KATANA_MBOX_RESET_REQUEST               0xC83A
 121 #define KATANA_MBOX_RESET_ACK                   0xE430
 122 #define KATANA_MBOX_RESET_DONE                  0x32E5
 123
 124 #define HSL_PLD_BASE                            0x00010000
 125 #define HSL_PLD_J4SGA_REG_OFF                   0
 126 #define HSL_PLD_J4GA_REG_OFF                    1
 127 #define HSL_PLD_J2GA_REG_OFF                    2
 128 #define HSL_PLD_HOT_SWAP_OFF                    6
 129 #define HSL_PLD_HOT_SWAP_LED_BIT                0x1
 130 #define GA_MASK                                 0x1f
 131 #define HSL_PLD_SIZE                            0x1000
 132 #define K3750_GPP_GEO_ADDR_PINS                 0xf8000000
 133 #define K3750_GPP_GEO_ADDR_SHIFT                27
 134
 135 #define K3750_GPP_EVENT_PROC_0                  (1 << 21)
 136 #define K3750_GPP_EVENT_PROC_1_2                (1 << 2)
 137
 138 #define PCI_VENDOR_ID_ARTESYN                   0x1223
 139 #define PCI_DEVICE_ID_KATANA_3750_PROC0         0x0041
 140 #define PCI_DEVICE_ID_KATANA_3750_PROC1         0x0042
 141 #define PCI_DEVICE_ID_KATANA_3750_PROC2         0x0043
 142
 143 #define COPROC_MEM_FUNCTION                     0
 144 #define COPROC_MEM_BAR                          0
 145 #define COPROC_REGS_FUNCTION                    0
 146 #define COPROC_REGS_BAR                         4
 147 #define COPROC_FLASH_FUNCTION                   2
 148 #define COPROC_FLASH_BAR                        4
 149
 150 #define KATANA_IPMB_LOCAL_I2C_ADDR              0x08
 151
 152 #define KATANA_DEFAULT_BAUD                     9600
 153 #define KATANA_MPSC_CLK_SRC                     8         /* TCLK */
 154
 155 #define KATANA_MTD_MONITOR_SIZE                 (1 << 20) /* 1 MB */
 156
 157 #define KATANA_ETH0_PHY_ADDR                    12
 158 #define KATANA_ETH1_PHY_ADDR                    11
 159 #define KATANA_ETH2_PHY_ADDR                    4
 160
 161 #define KATANA_PRODUCT_ID_3750                  0x01
 162 #define KATANA_PRODUCT_ID_750i                  0x02
 163 #define KATANA_PRODUCT_ID_752i                  0x04
 164
 165 #define KATANA_ETH_TX_QUEUE_SIZE                800
 166 #define KATANA_ETH_RX_QUEUE_SIZE                400
 167
 168 #define KATANA_ETH_PORT_CONFIG_VALUE                    \
 169         ETH_UNICAST_NORMAL_MODE                 |       \
 170         ETH_DEFAULT_RX_QUEUE_0                  |       \
 171         ETH_DEFAULT_RX_ARP_QUEUE_0              |       \
 172         ETH_RECEIVE_BC_IF_NOT_IP_OR_ARP         |       \
 173         ETH_RECEIVE_BC_IF_IP                    |       \
 174         ETH_RECEIVE_BC_IF_ARP                   |       \
 175         ETH_CAPTURE_TCP_FRAMES_DIS              |       \
 176         ETH_CAPTURE_UDP_FRAMES_DIS              |       \
 177         ETH_DEFAULT_RX_TCP_QUEUE_0              |       \
 178         ETH_DEFAULT_RX_UDP_QUEUE_0              |       \
 179         ETH_DEFAULT_RX_BPDU_QUEUE_0
 180
 181 #define KATANA_ETH_PORT_CONFIG_EXTEND_VALUE             \
 182         ETH_SPAN_BPDU_PACKETS_AS_NORMAL         |       \
 183         ETH_PARTITION_DISABLE
 184
 185 #define GT_ETH_IPG_INT_RX(value)                        \
 186         ((value & 0x3fff) << 8)
 187
 188 #define KATANA_ETH_PORT_SDMA_CONFIG_VALUE               \
 189         ETH_RX_BURST_SIZE_4_64BIT               |       \
 190         GT_ETH_IPG_INT_RX(0)                    |       \
 191         ETH_TX_BURST_SIZE_4_64BIT
 192
 193 #define KATANA_ETH_PORT_SERIAL_CONTROL_VALUE            \
 194         ETH_FORCE_LINK_PASS                     |       \
 195         ETH_ENABLE_AUTO_NEG_FOR_DUPLX           |       \
 196         ETH_DISABLE_AUTO_NEG_FOR_FLOW_CTRL      |       \
 197         ETH_ADV_SYMMETRIC_FLOW_CTRL             |       \
 198         ETH_FORCE_FC_MODE_NO_PAUSE_DIS_TX       |       \
 199         ETH_FORCE_BP_MODE_NO_JAM                |       \
 200         BIT9                                    |       \
 201         ETH_DO_NOT_FORCE_LINK_FAIL              |       \
 202         ETH_RETRANSMIT_16_ATTEMPTS              |       \
 203         ETH_ENABLE_AUTO_NEG_SPEED_GMII          |       \
 204         ETH_DTE_ADV_0                           |       \
 205         ETH_DISABLE_AUTO_NEG_BYPASS             |       \
 206         ETH_AUTO_NEG_NO_CHANGE                  |       \
 207         ETH_MAX_RX_PACKET_9700BYTE              |       \
 208         ETH_CLR_EXT_LOOPBACK                    |       \
 209         ETH_SET_FULL_DUPLEX_MODE                |       \
 210         ETH_ENABLE_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX
 211
 212 #ifndef __ASSEMBLY__
 213
 214 typedef enum {
 215         KATANA_ID_3750,
 216         KATANA_ID_750I,
 217         KATANA_ID_752I,
 218         KATANA_ID_MAX
 219 } katana_id_t;
 220
 221 #endif
 222
 223 static inline u32
 224 katana_bus_freq(void __iomem *cpld_base)
 225 {
 226         u8 bd_cfg_0;
 227
 228         bd_cfg_0 = in_8(cpld_base + KATANA_CPLD_BD_CFG_0);
 229
 230         switch (bd_cfg_0 & KATANA_CPLD_BD_CFG_0_SYSCLK_MASK) {
 231         case KATANA_CPLD_BD_CFG_0_SYSCLK_200:
 232                 return 200000000;
 233                 break;
 234
 235         case KATANA_CPLD_BD_CFG_0_SYSCLK_166:
 236                 return 166666666;
 237                 break;
 238
 239         case KATANA_CPLD_BD_CFG_0_SYSCLK_133:
 240                 return 133333333;
 241                 break;
 242
 243         case KATANA_CPLD_BD_CFG_0_SYSCLK_100:
 244                 return 100000000;
 245                 break;
 246
 247         default:
 248                 return 133333333;
 249                 break;
 250         }
 251 }
 252
 253 #endif  /* __PPC_PLATFORMS_KATANA_H */