softlockup: fix invalid proc_handler for softlockup_panic
[pandora-kernel.git] / arch / ppc / platforms / ev64360.c
1 /*
2  * Board setup routines for the Marvell EV-64360-BP Evaluation Board.
3  *
4  * Author: Lee Nicks <allinux@gmail.com>
5  *
6  * Based on code done by Rabeeh Khoury - rabeeh@galileo.co.il
7  * Based on code done by - Mark A. Greer <mgreer@mvista.com>
8  *
9  * This program is free software; you can redistribute it and/or modify it
10  * under the terms of the GNU General Public License as published by the
11  * Free Software Foundation; either version 2 of the License, or (at your
12  * option) any later version.
13  */
14 #include <linux/kernel.h>
15 #include <linux/pci.h>
16 #include <linux/kdev_t.h>
17 #include <linux/console.h>
18 #include <linux/initrd.h>
19 #include <linux/root_dev.h>
20 #include <linux/delay.h>
21 #include <linux/seq_file.h>
22 #include <linux/bootmem.h>
23 #include <linux/mtd/physmap.h>
24 #include <linux/mv643xx.h>
25 #include <linux/platform_device.h>
26 #include <asm/page.h>
27 #include <asm/time.h>
28 #include <asm/smp.h>
29 #include <asm/todc.h>
30 #include <asm/bootinfo.h>
31 #include <asm/ppcboot.h>
32 #include <asm/mv64x60.h>
33 #include <asm/machdep.h>
34 #include <platforms/ev64360.h>
35
36 #define BOARD_VENDOR    "Marvell"
37 #define BOARD_MACHINE   "EV-64360-BP"
38
39 static struct           mv64x60_handle bh;
40 static void __iomem     *sram_base;
41
42 static u32              ev64360_flash_size_0;
43 static u32              ev64360_flash_size_1;
44
45 static u32              ev64360_bus_frequency;
46
47 unsigned char   __res[sizeof(bd_t)];
48
49 TODC_ALLOC();
50
51 static int __init
52 ev64360_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
53 {
54         return 0;
55 }
56
57 static void __init
58 ev64360_setup_bridge(void)
59 {
60         struct mv64x60_setup_info si;
61         int i;
62
63         memset(&si, 0, sizeof(si));
64
65         si.phys_reg_base = CONFIG_MV64X60_NEW_BASE;
66
67         #ifdef CONFIG_PCI
68         si.pci_1.enable_bus = 1;
69         si.pci_1.pci_io.cpu_base = EV64360_PCI1_IO_START_PROC_ADDR;
70         si.pci_1.pci_io.pci_base_hi = 0;
71         si.pci_1.pci_io.pci_base_lo = EV64360_PCI1_IO_START_PCI_ADDR;
72         si.pci_1.pci_io.size = EV64360_PCI1_IO_SIZE;
73         si.pci_1.pci_io.swap = MV64x60_CPU2PCI_SWAP_NONE;
74         si.pci_1.pci_mem[0].cpu_base = EV64360_PCI1_MEM_START_PROC_ADDR;
75         si.pci_1.pci_mem[0].pci_base_hi = EV64360_PCI1_MEM_START_PCI_HI_ADDR;
76         si.pci_1.pci_mem[0].pci_base_lo = EV64360_PCI1_MEM_START_PCI_LO_ADDR;
77         si.pci_1.pci_mem[0].size = EV64360_PCI1_MEM_SIZE;
78         si.pci_1.pci_mem[0].swap = MV64x60_CPU2PCI_SWAP_NONE;
79         si.pci_1.pci_cmd_bits = 0;
80         si.pci_1.latency_timer = 0x80;
81         #else
82         si.pci_0.enable_bus = 0;
83         si.pci_1.enable_bus = 0;
84         #endif
85
86         for (i = 0; i < MV64x60_CPU2MEM_WINDOWS; i++) {
87 #if defined(CONFIG_NOT_COHERENT_CACHE)
88                 si.cpu_prot_options[i] = 0;
89                 si.enet_options[i] = MV64360_ENET2MEM_SNOOP_NONE;
90                 si.mpsc_options[i] = MV64360_MPSC2MEM_SNOOP_NONE;
91                 si.idma_options[i] = MV64360_IDMA2MEM_SNOOP_NONE;
92
93                 si.pci_1.acc_cntl_options[i] =
94                     MV64360_PCI_ACC_CNTL_SNOOP_NONE |
95                     MV64360_PCI_ACC_CNTL_SWAP_NONE |
96                     MV64360_PCI_ACC_CNTL_MBURST_128_BYTES |
97                     MV64360_PCI_ACC_CNTL_RDSIZE_256_BYTES;
98 #else
99                 si.cpu_prot_options[i] = 0;
100                 si.enet_options[i] = MV64360_ENET2MEM_SNOOP_NONE; /* errata */
101                 si.mpsc_options[i] = MV64360_MPSC2MEM_SNOOP_NONE; /* errata */
102                 si.idma_options[i] = MV64360_IDMA2MEM_SNOOP_NONE; /* errata */
103
104                 si.pci_1.acc_cntl_options[i] =
105                     MV64360_PCI_ACC_CNTL_SNOOP_WB |
106                     MV64360_PCI_ACC_CNTL_SWAP_NONE |
107                     MV64360_PCI_ACC_CNTL_MBURST_32_BYTES |
108                     MV64360_PCI_ACC_CNTL_RDSIZE_32_BYTES;
109 #endif
110         }
111
112         if (mv64x60_init(&bh, &si))
113                 printk(KERN_WARNING "Bridge initialization failed.\n");
114
115         #ifdef CONFIG_PCI
116         pci_dram_offset = 0; /* sys mem at same addr on PCI & cpu bus */
117         ppc_md.pci_swizzle = common_swizzle;
118         ppc_md.pci_map_irq = ev64360_map_irq;
119         ppc_md.pci_exclude_device = mv64x60_pci_exclude_device;
120
121         mv64x60_set_bus(&bh, 1, 0);
122         bh.hose_b->first_busno = 0;
123         bh.hose_b->last_busno = 0xff;
124         #endif
125 }
126
127 /* Bridge & platform setup routines */
128 void __init
129 ev64360_intr_setup(void)
130 {
131         /* MPP 8, 9, and 10 */
132         mv64x60_clr_bits(&bh, MV64x60_MPP_CNTL_1, 0xfff);
133
134         /*
135          * Define GPP 8,9,and 10 interrupt polarity as active low
136          * input signal and level triggered
137          */
138         mv64x60_set_bits(&bh, MV64x60_GPP_LEVEL_CNTL, 0x700);
139         mv64x60_clr_bits(&bh, MV64x60_GPP_IO_CNTL, 0x700);
140
141         /* Config GPP intr ctlr to respond to level trigger */
142         mv64x60_set_bits(&bh, MV64x60_COMM_ARBITER_CNTL, (1<<10));
143
144         /* Erranum FEr PCI-#8 */
145         mv64x60_clr_bits(&bh, MV64x60_PCI0_CMD, (1<<5) | (1<<9));
146         mv64x60_clr_bits(&bh, MV64x60_PCI1_CMD, (1<<5) | (1<<9));
147
148         /*
149          * Dismiss and then enable interrupt on GPP interrupt cause
150          * for CPU #0
151          */
152         mv64x60_write(&bh, MV64x60_GPP_INTR_CAUSE, ~0x700);
153         mv64x60_set_bits(&bh, MV64x60_GPP_INTR_MASK, 0x700);
154
155         /*
156          * Dismiss and then enable interrupt on CPU #0 high cause reg
157          * BIT25 summarizes GPP interrupts 8-15
158          */
159         mv64x60_set_bits(&bh, MV64360_IC_CPU0_INTR_MASK_HI, (1<<25));
160 }
161
162 void __init
163 ev64360_setup_peripherals(void)
164 {
165         u32 base;
166
167         /* Set up window for boot CS */
168         mv64x60_set_32bit_window(&bh, MV64x60_CPU2BOOT_WIN,
169                  EV64360_BOOT_WINDOW_BASE, EV64360_BOOT_WINDOW_SIZE, 0);
170         bh.ci->enable_window_32bit(&bh, MV64x60_CPU2BOOT_WIN);
171
172         /* We only use the 32-bit flash */
173         mv64x60_get_32bit_window(&bh, MV64x60_CPU2BOOT_WIN, &base,
174                 &ev64360_flash_size_0);
175         ev64360_flash_size_1 = 0;
176
177         mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_1_WIN,
178                  EV64360_RTC_WINDOW_BASE, EV64360_RTC_WINDOW_SIZE, 0);
179         bh.ci->enable_window_32bit(&bh, MV64x60_CPU2DEV_1_WIN);
180
181         TODC_INIT(TODC_TYPE_DS1501, 0, 0,
182                 ioremap(EV64360_RTC_WINDOW_BASE, EV64360_RTC_WINDOW_SIZE), 8);
183
184         mv64x60_set_32bit_window(&bh, MV64x60_CPU2SRAM_WIN,
185                  EV64360_INTERNAL_SRAM_BASE, MV64360_SRAM_SIZE, 0);
186         bh.ci->enable_window_32bit(&bh, MV64x60_CPU2SRAM_WIN);
187         sram_base = ioremap(EV64360_INTERNAL_SRAM_BASE, MV64360_SRAM_SIZE);
188
189         /* Set up Enet->SRAM window */
190         mv64x60_set_32bit_window(&bh, MV64x60_ENET2MEM_4_WIN,
191                 EV64360_INTERNAL_SRAM_BASE, MV64360_SRAM_SIZE, 0x2);
192         bh.ci->enable_window_32bit(&bh, MV64x60_ENET2MEM_4_WIN);
193
194         /* Give enet r/w access to memory region */
195         mv64x60_set_bits(&bh, MV64360_ENET2MEM_ACC_PROT_0, (0x3 << (4 << 1)));
196         mv64x60_set_bits(&bh, MV64360_ENET2MEM_ACC_PROT_1, (0x3 << (4 << 1)));
197         mv64x60_set_bits(&bh, MV64360_ENET2MEM_ACC_PROT_2, (0x3 << (4 << 1)));
198
199         mv64x60_clr_bits(&bh, MV64x60_PCI1_PCI_DECODE_CNTL, (1 << 3));
200         mv64x60_clr_bits(&bh, MV64x60_TIMR_CNTR_0_3_CNTL,
201                          ((1 << 0) | (1 << 8) | (1 << 16) | (1 << 24)));
202
203 #if defined(CONFIG_NOT_COHERENT_CACHE)
204         mv64x60_write(&bh, MV64360_SRAM_CONFIG, 0x00160000);
205 #else
206         mv64x60_write(&bh, MV64360_SRAM_CONFIG, 0x001600b2);
207 #endif
208
209         /*
210          * Setting the SRAM to 0. Note that this generates parity errors on
211          * internal data path in SRAM since it's first time accessing it
212          * while after reset it's not configured.
213          */
214         memset(sram_base, 0, MV64360_SRAM_SIZE);
215
216         /* set up PCI interrupt controller */
217         ev64360_intr_setup();
218 }
219
220 static void __init
221 ev64360_setup_arch(void)
222 {
223         if (ppc_md.progress)
224                 ppc_md.progress("ev64360_setup_arch: enter", 0);
225
226         set_tb(0, 0);
227
228 #ifdef CONFIG_BLK_DEV_INITRD
229         if (initrd_start)
230                 ROOT_DEV = Root_RAM0;
231         else
232 #endif
233 #ifdef   CONFIG_ROOT_NFS
234                 ROOT_DEV = Root_NFS;
235 #else
236                 ROOT_DEV = Root_SDA2;
237 #endif
238
239         /*
240          * Set up the L2CR register.
241          */
242         _set_L2CR(L2CR_L2E | L2CR_L2PE);
243
244         if (ppc_md.progress)
245                 ppc_md.progress("ev64360_setup_arch: calling setup_bridge", 0);
246
247         ev64360_setup_bridge();
248         ev64360_setup_peripherals();
249         ev64360_bus_frequency = ev64360_bus_freq();
250
251         printk(KERN_INFO "%s %s port (C) 2005 Lee Nicks "
252                 "(allinux@gmail.com)\n", BOARD_VENDOR, BOARD_MACHINE);
253         if (ppc_md.progress)
254                 ppc_md.progress("ev64360_setup_arch: exit", 0);
255 }
256
257 /* Platform device data fixup routines. */
258 #if defined(CONFIG_SERIAL_MPSC)
259 static void __init
260 ev64360_fixup_mpsc_pdata(struct platform_device *pdev)
261 {
262         struct mpsc_pdata *pdata;
263
264         pdata = (struct mpsc_pdata *)pdev->dev.platform_data;
265
266         pdata->max_idle = 40;
267         pdata->default_baud = EV64360_DEFAULT_BAUD;
268         pdata->brg_clk_src = EV64360_MPSC_CLK_SRC;
269         /*
270          * TCLK (not SysCLk) is routed to BRG, then to the MPSC.  On most parts,
271          * TCLK == SysCLK but on 64460, they are separate pins.
272          * SysCLK can go up to 200 MHz but TCLK can only go up to 133 MHz.
273          */
274         pdata->brg_clk_freq = min(ev64360_bus_frequency, MV64x60_TCLK_FREQ_MAX);
275 }
276 #endif
277
278 #if defined(CONFIG_MV643XX_ETH)
279 static void __init
280 ev64360_fixup_eth_pdata(struct platform_device *pdev)
281 {
282         struct mv643xx_eth_platform_data *eth_pd;
283         static u16 phy_addr[] = {
284                 EV64360_ETH0_PHY_ADDR,
285                 EV64360_ETH1_PHY_ADDR,
286                 EV64360_ETH2_PHY_ADDR,
287         };
288
289         eth_pd = pdev->dev.platform_data;
290         eth_pd->force_phy_addr = 1;
291         eth_pd->phy_addr = phy_addr[pdev->id];
292         eth_pd->tx_queue_size = EV64360_ETH_TX_QUEUE_SIZE;
293         eth_pd->rx_queue_size = EV64360_ETH_RX_QUEUE_SIZE;
294 }
295 #endif
296
297 static int
298 ev64360_platform_notify(struct device *dev)
299 {
300         static struct {
301                 char    *bus_id;
302                 void    ((*rtn)(struct platform_device *pdev));
303         } dev_map[] = {
304 #if defined(CONFIG_SERIAL_MPSC)
305                 { MPSC_CTLR_NAME ".0", ev64360_fixup_mpsc_pdata },
306                 { MPSC_CTLR_NAME ".1", ev64360_fixup_mpsc_pdata },
307 #endif
308 #if defined(CONFIG_MV643XX_ETH)
309                 { MV643XX_ETH_NAME ".0", ev64360_fixup_eth_pdata },
310                 { MV643XX_ETH_NAME ".1", ev64360_fixup_eth_pdata },
311                 { MV643XX_ETH_NAME ".2", ev64360_fixup_eth_pdata },
312 #endif
313         };
314         struct platform_device  *pdev;
315         int     i;
316
317         if (dev && dev->bus_id)
318                 for (i=0; i<ARRAY_SIZE(dev_map); i++)
319                         if (!strncmp(dev->bus_id, dev_map[i].bus_id,
320                                 BUS_ID_SIZE)) {
321
322                                 pdev = container_of(dev,
323                                         struct platform_device, dev);
324                                 dev_map[i].rtn(pdev);
325                         }
326
327         return 0;
328 }
329
330 #ifdef CONFIG_MTD_PHYSMAP
331
332 #ifndef MB
333 #define MB      (1 << 20)
334 #endif
335
336 /*
337  * MTD Layout.
338  *
339  * FLASH Amount:        0xff000000 - 0xffffffff
340  * -------------        -----------------------
341  * Reserved:            0xff000000 - 0xff03ffff
342  * JFFS2 file system:   0xff040000 - 0xffefffff
343  * U-boot:              0xfff00000 - 0xffffffff
344  */
345 static int __init
346 ev64360_setup_mtd(void)
347 {
348         u32     size;
349         int     ptbl_entries;
350         static struct mtd_partition     *ptbl;
351
352         size = ev64360_flash_size_0 + ev64360_flash_size_1;
353         if (!size)
354                 return -ENOMEM;
355
356         ptbl_entries = 3;
357
358         if ((ptbl = kzalloc(ptbl_entries * sizeof(struct mtd_partition),
359                 GFP_KERNEL)) == NULL) {
360
361                 printk(KERN_WARNING "Can't alloc MTD partition table\n");
362                 return -ENOMEM;
363         }
364
365         ptbl[0].name = "reserved";
366         ptbl[0].offset = 0;
367         ptbl[0].size = EV64360_MTD_RESERVED_SIZE;
368         ptbl[1].name = "jffs2";
369         ptbl[1].offset = EV64360_MTD_RESERVED_SIZE;
370         ptbl[1].size = EV64360_MTD_JFFS2_SIZE;
371         ptbl[2].name = "U-BOOT";
372         ptbl[2].offset = EV64360_MTD_RESERVED_SIZE + EV64360_MTD_JFFS2_SIZE;
373         ptbl[2].size = EV64360_MTD_UBOOT_SIZE;
374
375         physmap_map.size = size;
376         physmap_set_partitions(ptbl, ptbl_entries);
377         return 0;
378 }
379
380 arch_initcall(ev64360_setup_mtd);
381 #endif
382
383 static void
384 ev64360_restart(char *cmd)
385 {
386         ulong   i = 0xffffffff;
387         volatile unsigned char * rtc_base = ioremap(EV64360_RTC_WINDOW_BASE,0x4000);
388
389         /* issue hard reset */
390         rtc_base[0xf] = 0x80;
391         rtc_base[0xc] = 0x00;
392         rtc_base[0xd] = 0x01;
393         rtc_base[0xf] = 0x83;
394
395         while (i-- > 0) ;
396         panic("restart failed\n");
397 }
398
399 static void
400 ev64360_halt(void)
401 {
402         while (1) ;
403         /* NOTREACHED */
404 }
405
406 static void
407 ev64360_power_off(void)
408 {
409         ev64360_halt();
410         /* NOTREACHED */
411 }
412
413 static int
414 ev64360_show_cpuinfo(struct seq_file *m)
415 {
416         seq_printf(m, "vendor\t\t: " BOARD_VENDOR "\n");
417         seq_printf(m, "machine\t\t: " BOARD_MACHINE "\n");
418         seq_printf(m, "bus speed\t: %dMHz\n", ev64360_bus_frequency/1000/1000);
419
420         return 0;
421 }
422
423 static void __init
424 ev64360_calibrate_decr(void)
425 {
426         u32 freq;
427
428         freq = ev64360_bus_frequency / 4;
429
430         printk(KERN_INFO "time_init: decrementer frequency = %lu.%.6lu MHz\n",
431                (long)freq / 1000000, (long)freq % 1000000);
432
433         tb_ticks_per_jiffy = freq / HZ;
434         tb_to_us = mulhwu_scale_factor(freq, 1000000);
435 }
436
437 unsigned long __init
438 ev64360_find_end_of_memory(void)
439 {
440         return mv64x60_get_mem_size(CONFIG_MV64X60_NEW_BASE,
441                 MV64x60_TYPE_MV64360);
442 }
443
444 static inline void
445 ev64360_set_bat(void)
446 {
447         mb();
448         mtspr(SPRN_DBAT2U, 0xf0001ffe);
449         mtspr(SPRN_DBAT2L, 0xf000002a);
450         mb();
451 }
452
453 #if defined(CONFIG_SERIAL_TEXT_DEBUG) && defined(CONFIG_SERIAL_MPSC_CONSOLE)
454 static void __init
455 ev64360_map_io(void)
456 {
457         io_block_mapping(CONFIG_MV64X60_NEW_BASE, \
458                          CONFIG_MV64X60_NEW_BASE, \
459                          0x00020000, _PAGE_IO);
460 }
461 #endif
462
463 void __init
464 platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
465               unsigned long r6, unsigned long r7)
466 {
467         parse_bootinfo(find_bootinfo());
468
469         /* ASSUMPTION:  If both r3 (bd_t pointer) and r6 (cmdline pointer)
470          * are non-zero, then we should use the board info from the bd_t
471          * structure and the cmdline pointed to by r6 instead of the
472          * information from birecs, if any.  Otherwise, use the information
473          * from birecs as discovered by the preceding call to
474          * parse_bootinfo().  This rule should work with both PPCBoot, which
475          * uses a bd_t board info structure, and the kernel boot wrapper,
476          * which uses birecs.
477          */
478         if (r3 && r6) {
479                 /* copy board info structure */
480                 memcpy( (void *)__res,(void *)(r3+KERNELBASE), sizeof(bd_t) );
481                 /* copy command line */
482                 *(char *)(r7+KERNELBASE) = 0;
483                 strcpy(cmd_line, (char *)(r6+KERNELBASE));
484         }
485         #ifdef CONFIG_ISA
486         isa_mem_base = 0;
487         #endif
488
489         ppc_md.setup_arch = ev64360_setup_arch;
490         ppc_md.show_cpuinfo = ev64360_show_cpuinfo;
491         ppc_md.init_IRQ = mv64360_init_irq;
492         ppc_md.get_irq = mv64360_get_irq;
493         ppc_md.restart = ev64360_restart;
494         ppc_md.power_off = ev64360_power_off;
495         ppc_md.halt = ev64360_halt;
496         ppc_md.find_end_of_memory = ev64360_find_end_of_memory;
497         ppc_md.init = NULL;
498
499         ppc_md.time_init = todc_time_init;
500         ppc_md.set_rtc_time = todc_set_rtc_time;
501         ppc_md.get_rtc_time = todc_get_rtc_time;
502         ppc_md.nvram_read_val = todc_direct_read_val;
503         ppc_md.nvram_write_val = todc_direct_write_val;
504         ppc_md.calibrate_decr = ev64360_calibrate_decr;
505
506 #if defined(CONFIG_SERIAL_TEXT_DEBUG) && defined(CONFIG_SERIAL_MPSC_CONSOLE)
507         ppc_md.setup_io_mappings = ev64360_map_io;
508         ppc_md.progress = mv64x60_mpsc_progress;
509         mv64x60_progress_init(CONFIG_MV64X60_NEW_BASE);
510 #endif
511
512 #if defined(CONFIG_SERIAL_MPSC) || defined(CONFIG_MV643XX_ETH)
513         platform_notify = ev64360_platform_notify;
514 #endif
515
516         ev64360_set_bat(); /* Need for ev64360_find_end_of_memory and progress */
517 }