arch/powerpc/platforms/pseries/smp.c

   1 /*
   2  * SMP support for pSeries machines.
   3  *
   4  * Dave Engebretsen, Peter Bergner, and
   5  * Mike Corrigan {engebret|bergner|mikec}@us.ibm.com
   6  *
   7  * Plus various changes from other IBM teams...
   8  *
   9  *      This program is free software; you can redistribute it and/or
  10  *      modify it under the terms of the GNU General Public License
  11  *      as published by the Free Software Foundation; either version
  12  *      2 of the License, or (at your option) any later version.
  13  */
  14
  15
  16 #include <linux/kernel.h>
  17 #include <linux/module.h>
  18 #include <linux/sched.h>
  19 #include <linux/smp.h>
  20 #include <linux/interrupt.h>
  21 #include <linux/delay.h>
  22 #include <linux/init.h>
  23 #include <linux/spinlock.h>
  24 #include <linux/cache.h>
  25 #include <linux/err.h>
  26 #include <linux/sysdev.h>
  27 #include <linux/cpu.h>
  28
  29 #include <asm/ptrace.h>
  30 #include <asm/atomic.h>
  31 #include <asm/irq.h>
  32 #include <asm/page.h>
  33 #include <asm/pgtable.h>
  34 #include <asm/io.h>
  35 #include <asm/prom.h>
  36 #include <asm/smp.h>
  37 #include <asm/paca.h>
  38 #include <asm/machdep.h>
  39 #include <asm/cputable.h>
  40 #include <asm/firmware.h>
  41 #include <asm/system.h>
  42 #include <asm/rtas.h>
  43 #include <asm/pSeries_reconfig.h>
  44 #include <asm/mpic.h>
  45 #include <asm/vdso_datapage.h>
  46 #include <asm/cputhreads.h>
  47
  48 #include "plpar_wrappers.h"
  49 #include "pseries.h"
  50 #include "xics.h"
  51 #include "offline_states.h"
  52
  53
  54 /*
  55  * The Primary thread of each non-boot processor was started from the OF client
  56  * interface by prom_hold_cpus and is spinning on secondary_hold_spinloop.
  57  */
  58 static cpumask_var_t of_spin_mask;
  59
  60 /* Query where a cpu is now.  Return codes #defined in plpar_wrappers.h */
  61 int smp_query_cpu_stopped(unsigned int pcpu)
  62 {
  63         int cpu_status, status;
  64         int qcss_tok = rtas_token("query-cpu-stopped-state");
  65
  66         if (qcss_tok == RTAS_UNKNOWN_SERVICE) {
  67                 printk(KERN_INFO "Firmware doesn't support "
  68                                 "query-cpu-stopped-state\n");
  69                 return QCSS_HARDWARE_ERROR;
  70         }
  71
  72         status = rtas_call(qcss_tok, 1, 2, &cpu_status, pcpu);
  73         if (status != 0) {
  74                 printk(KERN_ERR
  75                        "RTAS query-cpu-stopped-state failed: %i\n", status);
  76                 return status;
  77         }
  78
  79         return cpu_status;
  80 }
  81
  82 /**
  83  * smp_startup_cpu() - start the given cpu
  84  *
  85  * At boot time, there is nothing to do for primary threads which were
  86  * started from Open Firmware.  For anything else, call RTAS with the
  87  * appropriate start location.
  88  *
  89  * Returns:
  90  *      0       - failure
  91  *      1       - success
  92  */
  93 static inline int __devinit smp_startup_cpu(unsigned int lcpu)
  94 {
  95         int status;
  96         unsigned long start_here = __pa((u32)*((unsigned long *)
  97                                                generic_secondary_smp_init));
  98         unsigned int pcpu;
  99         int start_cpu;
 100
 101         if (cpumask_test_cpu(lcpu, of_spin_mask))
 102                 /* Already started by OF and sitting in spin loop */
 103                 return 1;
 104
 105         pcpu = get_hard_smp_processor_id(lcpu);
 106
 107         /* Check to see if the CPU out of FW already for kexec */
 108         if (smp_query_cpu_stopped(pcpu) == QCSS_NOT_STOPPED){
 109                 cpumask_set_cpu(lcpu, of_spin_mask);
 110                 return 1;
 111         }
 112
 113         /* Fixup atomic count: it exited inside IRQ handler. */
 114         task_thread_info(paca[lcpu].__current)->preempt_count   = 0;
 115
 116         if (get_cpu_current_state(lcpu) == CPU_STATE_INACTIVE)
 117                 goto out;
 118
 119         /*
 120          * If the RTAS start-cpu token does not exist then presume the
 121          * cpu is already spinning.
 122          */
 123         start_cpu = rtas_token("start-cpu");
 124         if (start_cpu == RTAS_UNKNOWN_SERVICE)
 125                 return 1;
 126
 127         status = rtas_call(start_cpu, 3, 1, NULL, pcpu, start_here, pcpu);
 128         if (status != 0) {
 129                 printk(KERN_ERR "start-cpu failed: %i\n", status);
 130                 return 0;
 131         }
 132
 133 out:
 134         return 1;
 135 }
 136
 137 #ifdef CONFIG_XICS
 138 static void __devinit smp_xics_setup_cpu(int cpu)
 139 {
 140         if (cpu != boot_cpuid)
 141                 xics_setup_cpu();
 142
 143         if (firmware_has_feature(FW_FEATURE_SPLPAR))
 144                 vpa_init(cpu);
 145
 146         cpumask_clear_cpu(cpu, of_spin_mask);
 147         set_cpu_current_state(cpu, CPU_STATE_ONLINE);
 148         set_default_offline_state(cpu);
 149
 150 }
 151 #endif /* CONFIG_XICS */
 152
 153 static void __devinit smp_pSeries_kick_cpu(int nr)
 154 {
 155         long rc;
 156         unsigned long hcpuid;
 157         BUG_ON(nr < 0 || nr >= NR_CPUS);
 158
 159         if (!smp_startup_cpu(nr))
 160                 return;
 161
 162         /*
 163          * The processor is currently spinning, waiting for the
 164          * cpu_start field to become non-zero After we set cpu_start,
 165          * the processor will continue on to secondary_start
 166          */
 167         paca[nr].cpu_start = 1;
 168
 169         set_preferred_offline_state(nr, CPU_STATE_ONLINE);
 170
 171         if (get_cpu_current_state(nr) == CPU_STATE_INACTIVE) {
 172                 hcpuid = get_hard_smp_processor_id(nr);
 173                 rc = plpar_hcall_norets(H_PROD, hcpuid);
 174                 if (rc != H_SUCCESS)
 175                         printk(KERN_ERR "Error: Prod to wake up processor %d "
 176                                                 "Ret= %ld\n", nr, rc);
 177         }
 178 }
 179
 180 static int smp_pSeries_cpu_bootable(unsigned int nr)
 181 {
 182         /* Special case - we inhibit secondary thread startup
 183          * during boot if the user requests it.
 184          */
 185         if (system_state < SYSTEM_RUNNING && cpu_has_feature(CPU_FTR_SMT)) {
 186                 if (!smt_enabled_at_boot && cpu_thread_in_core(nr) != 0)
 187                         return 0;
 188                 if (smt_enabled_at_boot
 189                     && cpu_thread_in_core(nr) >= smt_enabled_at_boot)
 190                         return 0;
 191         }
 192
 193         return 1;
 194 }
 195 #ifdef CONFIG_MPIC
 196 static struct smp_ops_t pSeries_mpic_smp_ops = {
 197         .message_pass   = smp_mpic_message_pass,
 198         .probe          = smp_mpic_probe,
 199         .kick_cpu       = smp_pSeries_kick_cpu,
 200         .setup_cpu      = smp_mpic_setup_cpu,
 201 };
 202 #endif
 203 #ifdef CONFIG_XICS
 204 static struct smp_ops_t pSeries_xics_smp_ops = {
 205         .message_pass   = smp_xics_message_pass,
 206         .probe          = smp_xics_probe,
 207         .kick_cpu       = smp_pSeries_kick_cpu,
 208         .setup_cpu      = smp_xics_setup_cpu,
 209         .cpu_bootable   = smp_pSeries_cpu_bootable,
 210 };
 211 #endif
 212
 213 /* This is called very early */
 214 static void __init smp_init_pseries(void)
 215 {
 216         int i;
 217
 218         pr_debug(" -> smp_init_pSeries()\n");
 219
 220         alloc_bootmem_cpumask_var(&of_spin_mask);
 221
 222         /* Mark threads which are still spinning in hold loops. */
 223         if (cpu_has_feature(CPU_FTR_SMT)) {
 224                 for_each_present_cpu(i) {
 225                         if (cpu_thread_in_core(i) == 0)
 226                                 cpumask_set_cpu(i, of_spin_mask);
 227                 }
 228         } else {
 229                 cpumask_copy(of_spin_mask, cpu_present_mask);
 230         }
 231
 232         cpumask_clear_cpu(boot_cpuid, of_spin_mask);
 233
 234         /* Non-lpar has additional take/give timebase */
 235         if (rtas_token("freeze-time-base") != RTAS_UNKNOWN_SERVICE) {
 236                 smp_ops->give_timebase = rtas_give_timebase;
 237                 smp_ops->take_timebase = rtas_take_timebase;
 238         }
 239
 240         pr_debug(" <- smp_init_pSeries()\n");
 241 }
 242
 243 #ifdef CONFIG_MPIC
 244 void __init smp_init_pseries_mpic(void)
 245 {
 246         smp_ops = &pSeries_mpic_smp_ops;
 247
 248         smp_init_pseries();
 249 }
 250 #endif
 251
 252 void __init smp_init_pseries_xics(void)
 253 {
 254         smp_ops = &pSeries_xics_smp_ops;
 255
 256         smp_init_pseries();
 257 }