arch/powerpc/platforms/cell/spufs/switch.c

   1 /*
   2  * spu_switch.c
   3  *
   4  * (C) Copyright IBM Corp. 2005
   5  *
   6  * Author: Mark Nutter <mnutter@us.ibm.com>
   7  *
   8  * Host-side part of SPU context switch sequence outlined in
   9  * Synergistic Processor Element, Book IV.
  10  *
  11  * A fully premptive switch of an SPE is very expensive in terms
  12  * of time and system resources.  SPE Book IV indicates that SPE
  13  * allocation should follow a "serially reusable device" model,
  14  * in which the SPE is assigned a task until it completes.  When
  15  * this is not possible, this sequence may be used to premptively
  16  * save, and then later (optionally) restore the context of a
  17  * program executing on an SPE.
  18  *
  19  *
  20  * This program is free software; you can redistribute it and/or modify
  21  * it under the terms of the GNU General Public License as published by
  22  * the Free Software Foundation; either version 2, or (at your option)
  23  * any later version.
  24  *
  25  * This program is distributed in the hope that it will be useful,
  26  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  27  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  28  * GNU General Public License for more details.
  29  *
  30  * You should have received a copy of the GNU General Public License
  31  * along with this program; if not, write to the Free Software
  32  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  33  */
  34
  35 #include <linux/module.h>
  36 #include <linux/errno.h>
  37 #include <linux/sched.h>
  38 #include <linux/kernel.h>
  39 #include <linux/mm.h>
  40 #include <linux/vmalloc.h>
  41 #include <linux/smp.h>
  42 #include <linux/smp_lock.h>
  43 #include <linux/stddef.h>
  44 #include <linux/unistd.h>
  45
  46 #include <asm/io.h>
  47 #include <asm/spu.h>
  48 #include <asm/spu_priv1.h>
  49 #include <asm/spu_csa.h>
  50 #include <asm/mmu_context.h>
  51
  52 #include "spu_save_dump.h"
  53 #include "spu_restore_dump.h"
  54
  55 #if 0
  56 #define POLL_WHILE_TRUE(_c) {                           \
  57     do {                                                \
  58     } while (_c);                                       \
  59   }
  60 #else
  61 #define RELAX_SPIN_COUNT                                1000
  62 #define POLL_WHILE_TRUE(_c) {                           \
  63     do {                                                \
  64         int _i;                                         \
  65         for (_i=0; _i<RELAX_SPIN_COUNT && (_c); _i++) { \
  66             cpu_relax();                                \
  67         }                                               \
  68         if (unlikely(_c)) yield();                      \
  69         else break;                                     \
  70     } while (_c);                                       \
  71   }
  72 #endif                          /* debug */
  73
  74 #define POLL_WHILE_FALSE(_c)    POLL_WHILE_TRUE(!(_c))
  75
  76 static inline void acquire_spu_lock(struct spu *spu)
  77 {
  78         /* Save, Step 1:
  79          * Restore, Step 1:
  80          *    Acquire SPU-specific mutual exclusion lock.
  81          *    TBD.
  82          */
  83 }
  84
  85 static inline void release_spu_lock(struct spu *spu)
  86 {
  87         /* Restore, Step 76:
  88          *    Release SPU-specific mutual exclusion lock.
  89          *    TBD.
  90          */
  91 }
  92
  93 static inline int check_spu_isolate(struct spu_state *csa, struct spu *spu)
  94 {
  95         struct spu_problem __iomem *prob = spu->problem;
  96         u32 isolate_state;
  97
  98         /* Save, Step 2:
  99          * Save, Step 6:
 100          *     If SPU_Status[E,L,IS] any field is '1', this
 101          *     SPU is in isolate state and cannot be context
 102          *     saved at this time.
 103          */
 104         isolate_state = SPU_STATUS_ISOLATED_STATE |
 105             SPU_STATUS_ISOLATED_LOAD_STAUTUS | SPU_STATUS_ISOLATED_EXIT_STAUTUS;
 106         return (in_be32(&prob->spu_status_R) & isolate_state) ? 1 : 0;
 107 }
 108
 109 static inline void disable_interrupts(struct spu_state *csa, struct spu *spu)
 110 {
 111         /* Save, Step 3:
 112          * Restore, Step 2:
 113          *     Save INT_Mask_class0 in CSA.
 114          *     Write INT_MASK_class0 with value of 0.
 115          *     Save INT_Mask_class1 in CSA.
 116          *     Write INT_MASK_class1 with value of 0.
 117          *     Save INT_Mask_class2 in CSA.
 118          *     Write INT_MASK_class2 with value of 0.
 119          */
 120         spin_lock_irq(&spu->register_lock);
 121         if (csa) {
 122                 csa->priv1.int_mask_class0_RW = spu_int_mask_get(spu, 0);
 123                 csa->priv1.int_mask_class1_RW = spu_int_mask_get(spu, 1);
 124                 csa->priv1.int_mask_class2_RW = spu_int_mask_get(spu, 2);
 125         }
 126         spu_int_mask_set(spu, 0, 0ul);
 127         spu_int_mask_set(spu, 1, 0ul);
 128         spu_int_mask_set(spu, 2, 0ul);
 129         eieio();
 130         spin_unlock_irq(&spu->register_lock);
 131 }
 132
 133 static inline void set_watchdog_timer(struct spu_state *csa, struct spu *spu)
 134 {
 135         /* Save, Step 4:
 136          * Restore, Step 25.
 137          *    Set a software watchdog timer, which specifies the
 138          *    maximum allowable time for a context save sequence.
 139          *
 140          *    For present, this implementation will not set a global
 141          *    watchdog timer, as virtualization & variable system load
 142          *    may cause unpredictable execution times.
 143          */
 144 }
 145
 146 static inline void inhibit_user_access(struct spu_state *csa, struct spu *spu)
 147 {
 148         /* Save, Step 5:
 149          * Restore, Step 3:
 150          *     Inhibit user-space access (if provided) to this
 151          *     SPU by unmapping the virtual pages assigned to
 152          *     the SPU memory-mapped I/O (MMIO) for problem
 153          *     state. TBD.
 154          */
 155 }
 156
 157 static inline void set_switch_pending(struct spu_state *csa, struct spu *spu)
 158 {
 159         /* Save, Step 7:
 160          * Restore, Step 5:
 161          *     Set a software context switch pending flag.
 162          */
 163         set_bit(SPU_CONTEXT_SWITCH_PENDING, &spu->flags);
 164         mb();
 165 }
 166
 167 static inline void save_mfc_cntl(struct spu_state *csa, struct spu *spu)
 168 {
 169         struct spu_priv2 __iomem *priv2 = spu->priv2;
 170
 171         /* Save, Step 8:
 172          *     Suspend DMA and save MFC_CNTL.
 173          */
 174         switch (in_be64(&priv2->mfc_control_RW) &
 175                MFC_CNTL_SUSPEND_DMA_STATUS_MASK) {
 176         case MFC_CNTL_SUSPEND_IN_PROGRESS:
 177                 POLL_WHILE_FALSE((in_be64(&priv2->mfc_control_RW) &
 178                                   MFC_CNTL_SUSPEND_DMA_STATUS_MASK) ==
 179                                  MFC_CNTL_SUSPEND_COMPLETE);
 180                 /* fall through */
 181         case MFC_CNTL_SUSPEND_COMPLETE:
 182                 if (csa) {
 183                         csa->priv2.mfc_control_RW =
 184                                 in_be64(&priv2->mfc_control_RW) |
 185                                 MFC_CNTL_SUSPEND_DMA_QUEUE;
 186                 }
 187                 break;
 188         case MFC_CNTL_NORMAL_DMA_QUEUE_OPERATION:
 189                 out_be64(&priv2->mfc_control_RW, MFC_CNTL_SUSPEND_DMA_QUEUE);
 190                 POLL_WHILE_FALSE((in_be64(&priv2->mfc_control_RW) &
 191                                   MFC_CNTL_SUSPEND_DMA_STATUS_MASK) ==
 192                                  MFC_CNTL_SUSPEND_COMPLETE);
 193                 if (csa) {
 194                         csa->priv2.mfc_control_RW =
 195                                 in_be64(&priv2->mfc_control_RW) &
 196                                 ~MFC_CNTL_SUSPEND_DMA_QUEUE;
 197                 }
 198                 break;
 199         }
 200 }
 201
 202 static inline void save_spu_runcntl(struct spu_state *csa, struct spu *spu)
 203 {
 204         struct spu_problem __iomem *prob = spu->problem;
 205
 206         /* Save, Step 9:
 207          *     Save SPU_Runcntl in the CSA.  This value contains
 208          *     the "Application Desired State".
 209          */
 210         csa->prob.spu_runcntl_RW = in_be32(&prob->spu_runcntl_RW);
 211 }
 212
 213 static inline void save_mfc_sr1(struct spu_state *csa, struct spu *spu)
 214 {
 215         /* Save, Step 10:
 216          *     Save MFC_SR1 in the CSA.
 217          */
 218         csa->priv1.mfc_sr1_RW = spu_mfc_sr1_get(spu);
 219 }
 220
 221 static inline void save_spu_status(struct spu_state *csa, struct spu *spu)
 222 {
 223         struct spu_problem __iomem *prob = spu->problem;
 224
 225         /* Save, Step 11:
 226          *     Read SPU_Status[R], and save to CSA.
 227          */
 228         if ((in_be32(&prob->spu_status_R) & SPU_STATUS_RUNNING) == 0) {
 229                 csa->prob.spu_status_R = in_be32(&prob->spu_status_R);
 230         } else {
 231                 u32 stopped;
 232
 233                 out_be32(&prob->spu_runcntl_RW, SPU_RUNCNTL_STOP);
 234                 eieio();
 235                 POLL_WHILE_TRUE(in_be32(&prob->spu_status_R) &
 236                                 SPU_STATUS_RUNNING);
 237                 stopped =
 238                     SPU_STATUS_INVALID_INSTR | SPU_STATUS_SINGLE_STEP |
 239                     SPU_STATUS_STOPPED_BY_HALT | SPU_STATUS_STOPPED_BY_STOP;
 240                 if ((in_be32(&prob->spu_status_R) & stopped) == 0)
 241                         csa->prob.spu_status_R = SPU_STATUS_RUNNING;
 242                 else
 243                         csa->prob.spu_status_R = in_be32(&prob->spu_status_R);
 244         }
 245 }
 246
 247 static inline void save_mfc_decr(struct spu_state *csa, struct spu *spu)
 248 {
 249         struct spu_priv2 __iomem *priv2 = spu->priv2;
 250
 251         /* Save, Step 12:
 252          *     Read MFC_CNTL[Ds].  Update saved copy of
 253          *     CSA.MFC_CNTL[Ds].
 254          */
 255         if (in_be64(&priv2->mfc_control_RW) & MFC_CNTL_DECREMENTER_RUNNING) {
 256                 csa->priv2.mfc_control_RW |= MFC_CNTL_DECREMENTER_RUNNING;
 257                 csa->suspend_time = get_cycles();
 258                 out_be64(&priv2->spu_chnlcntptr_RW, 7ULL);
 259                 eieio();
 260                 csa->spu_chnldata_RW[7] = in_be64(&priv2->spu_chnldata_RW);
 261                 eieio();
 262         } else {
 263                 csa->priv2.mfc_control_RW &= ~MFC_CNTL_DECREMENTER_RUNNING;
 264         }
 265 }
 266
 267 static inline void halt_mfc_decr(struct spu_state *csa, struct spu *spu)
 268 {
 269         struct spu_priv2 __iomem *priv2 = spu->priv2;
 270
 271         /* Save, Step 13:
 272          *     Write MFC_CNTL[Dh] set to a '1' to halt
 273          *     the decrementer.
 274          */
 275         out_be64(&priv2->mfc_control_RW, MFC_CNTL_DECREMENTER_HALTED);
 276         eieio();
 277 }
 278
 279 static inline void save_timebase(struct spu_state *csa, struct spu *spu)
 280 {
 281         /* Save, Step 14:
 282          *    Read PPE Timebase High and Timebase low registers
 283          *    and save in CSA.  TBD.
 284          */
 285         csa->suspend_time = get_cycles();
 286 }
 287
 288 static inline void remove_other_spu_access(struct spu_state *csa,
 289                                            struct spu *spu)
 290 {
 291         /* Save, Step 15:
 292          *     Remove other SPU access to this SPU by unmapping
 293          *     this SPU's pages from their address space.  TBD.
 294          */
 295 }
 296
 297 static inline void do_mfc_mssync(struct spu_state *csa, struct spu *spu)
 298 {
 299         struct spu_problem __iomem *prob = spu->problem;
 300
 301         /* Save, Step 16:
 302          * Restore, Step 11.
 303          *     Write SPU_MSSync register. Poll SPU_MSSync[P]
 304          *     for a value of 0.
 305          */
 306         out_be64(&prob->spc_mssync_RW, 1UL);
 307         POLL_WHILE_TRUE(in_be64(&prob->spc_mssync_RW) & MS_SYNC_PENDING);
 308 }
 309
 310 static inline void issue_mfc_tlbie(struct spu_state *csa, struct spu *spu)
 311 {
 312         /* Save, Step 17:
 313          * Restore, Step 12.
 314          * Restore, Step 48.
 315          *     Write TLB_Invalidate_Entry[IS,VPN,L,Lp]=0 register.
 316          *     Then issue a PPE sync instruction.
 317          */
 318         spu_tlb_invalidate(spu);
 319         mb();
 320 }
 321
 322 static inline void handle_pending_interrupts(struct spu_state *csa,
 323                                              struct spu *spu)
 324 {
 325         /* Save, Step 18:
 326          *     Handle any pending interrupts from this SPU
 327          *     here.  This is OS or hypervisor specific.  One
 328          *     option is to re-enable interrupts to handle any
 329          *     pending interrupts, with the interrupt handlers
 330          *     recognizing the software Context Switch Pending
 331          *     flag, to ensure the SPU execution or MFC command
 332          *     queue is not restarted.  TBD.
 333          */
 334 }
 335
 336 static inline void save_mfc_queues(struct spu_state *csa, struct spu *spu)
 337 {
 338         struct spu_priv2 __iomem *priv2 = spu->priv2;
 339         int i;
 340
 341         /* Save, Step 19:
 342          *     If MFC_Cntl[Se]=0 then save
 343          *     MFC command queues.
 344          */
 345         if ((in_be64(&priv2->mfc_control_RW) & MFC_CNTL_DMA_QUEUES_EMPTY) == 0) {
 346                 for (i = 0; i < 8; i++) {
 347                         csa->priv2.puq[i].mfc_cq_data0_RW =
 348                             in_be64(&priv2->puq[i].mfc_cq_data0_RW);
 349                         csa->priv2.puq[i].mfc_cq_data1_RW =
 350                             in_be64(&priv2->puq[i].mfc_cq_data1_RW);
 351                         csa->priv2.puq[i].mfc_cq_data2_RW =
 352                             in_be64(&priv2->puq[i].mfc_cq_data2_RW);
 353                         csa->priv2.puq[i].mfc_cq_data3_RW =
 354                             in_be64(&priv2->puq[i].mfc_cq_data3_RW);
 355                 }
 356                 for (i = 0; i < 16; i++) {
 357                         csa->priv2.spuq[i].mfc_cq_data0_RW =
 358                             in_be64(&priv2->spuq[i].mfc_cq_data0_RW);
 359                         csa->priv2.spuq[i].mfc_cq_data1_RW =
 360                             in_be64(&priv2->spuq[i].mfc_cq_data1_RW);
 361                         csa->priv2.spuq[i].mfc_cq_data2_RW =
 362                             in_be64(&priv2->spuq[i].mfc_cq_data2_RW);
 363                         csa->priv2.spuq[i].mfc_cq_data3_RW =
 364                             in_be64(&priv2->spuq[i].mfc_cq_data3_RW);
 365                 }
 366         }
 367 }
 368
 369 static inline void save_ppu_querymask(struct spu_state *csa, struct spu *spu)
 370 {
 371         struct spu_problem __iomem *prob = spu->problem;
 372
 373         /* Save, Step 20:
 374          *     Save the PPU_QueryMask register
 375          *     in the CSA.
 376          */
 377         csa->prob.dma_querymask_RW = in_be32(&prob->dma_querymask_RW);
 378 }
 379
 380 static inline void save_ppu_querytype(struct spu_state *csa, struct spu *spu)
 381 {
 382         struct spu_problem __iomem *prob = spu->problem;
 383
 384         /* Save, Step 21:
 385          *     Save the PPU_QueryType register
 386          *     in the CSA.
 387          */
 388         csa->prob.dma_querytype_RW = in_be32(&prob->dma_querytype_RW);
 389 }
 390
 391 static inline void save_mfc_csr_tsq(struct spu_state *csa, struct spu *spu)
 392 {
 393         struct spu_priv2 __iomem *priv2 = spu->priv2;
 394
 395         /* Save, Step 22:
 396          *     Save the MFC_CSR_TSQ register
 397          *     in the LSCSA.
 398          */
 399         csa->priv2.spu_tag_status_query_RW =
 400             in_be64(&priv2->spu_tag_status_query_RW);
 401 }
 402
 403 static inline void save_mfc_csr_cmd(struct spu_state *csa, struct spu *spu)
 404 {
 405         struct spu_priv2 __iomem *priv2 = spu->priv2;
 406
 407         /* Save, Step 23:
 408          *     Save the MFC_CSR_CMD1 and MFC_CSR_CMD2
 409          *     registers in the CSA.
 410          */
 411         csa->priv2.spu_cmd_buf1_RW = in_be64(&priv2->spu_cmd_buf1_RW);
 412         csa->priv2.spu_cmd_buf2_RW = in_be64(&priv2->spu_cmd_buf2_RW);
 413 }
 414
 415 static inline void save_mfc_csr_ato(struct spu_state *csa, struct spu *spu)
 416 {
 417         struct spu_priv2 __iomem *priv2 = spu->priv2;
 418
 419         /* Save, Step 24:
 420          *     Save the MFC_CSR_ATO register in
 421          *     the CSA.
 422          */
 423         csa->priv2.spu_atomic_status_RW = in_be64(&priv2->spu_atomic_status_RW);
 424 }
 425
 426 static inline void save_mfc_tclass_id(struct spu_state *csa, struct spu *spu)
 427 {
 428         /* Save, Step 25:
 429          *     Save the MFC_TCLASS_ID register in
 430          *     the CSA.
 431          */
 432         csa->priv1.mfc_tclass_id_RW = spu_mfc_tclass_id_get(spu);
 433 }
 434
 435 static inline void set_mfc_tclass_id(struct spu_state *csa, struct spu *spu)
 436 {
 437         /* Save, Step 26:
 438          * Restore, Step 23.
 439          *     Write the MFC_TCLASS_ID register with
 440          *     the value 0x10000000.
 441          */
 442         spu_mfc_tclass_id_set(spu, 0x10000000);
 443         eieio();
 444 }
 445
 446 static inline void purge_mfc_queue(struct spu_state *csa, struct spu *spu)
 447 {
 448         struct spu_priv2 __iomem *priv2 = spu->priv2;
 449
 450         /* Save, Step 27:
 451          * Restore, Step 14.
 452          *     Write MFC_CNTL[Pc]=1 (purge queue).
 453          */
 454         out_be64(&priv2->mfc_control_RW, MFC_CNTL_PURGE_DMA_REQUEST);
 455         eieio();
 456 }
 457
 458 static inline void wait_purge_complete(struct spu_state *csa, struct spu *spu)
 459 {
 460         struct spu_priv2 __iomem *priv2 = spu->priv2;
 461
 462         /* Save, Step 28:
 463          *     Poll MFC_CNTL[Ps] until value '11' is read
 464          *     (purge complete).
 465          */
 466         POLL_WHILE_FALSE((in_be64(&priv2->mfc_control_RW) &
 467                          MFC_CNTL_PURGE_DMA_STATUS_MASK) ==
 468                          MFC_CNTL_PURGE_DMA_COMPLETE);
 469 }
 470
 471 static inline void save_mfc_slbs(struct spu_state *csa, struct spu *spu)
 472 {
 473         struct spu_priv2 __iomem *priv2 = spu->priv2;
 474         int i;
 475
 476         /* Save, Step 29:
 477          *     If MFC_SR1[R]='1', save SLBs in CSA.
 478          */
 479         if (spu_mfc_sr1_get(spu) & MFC_STATE1_RELOCATE_MASK) {
 480                 csa->priv2.slb_index_W = in_be64(&priv2->slb_index_W);
 481                 for (i = 0; i < 8; i++) {
 482                         out_be64(&priv2->slb_index_W, i);
 483                         eieio();
 484                         csa->slb_esid_RW[i] = in_be64(&priv2->slb_esid_RW);
 485                         csa->slb_vsid_RW[i] = in_be64(&priv2->slb_vsid_RW);
 486                         eieio();
 487                 }
 488         }
 489 }
 490
 491 static inline void setup_mfc_sr1(struct spu_state *csa, struct spu *spu)
 492 {
 493         /* Save, Step 30:
 494          * Restore, Step 18:
 495          *     Write MFC_SR1 with MFC_SR1[D=0,S=1] and
 496          *     MFC_SR1[TL,R,Pr,T] set correctly for the
 497          *     OS specific environment.
 498          *
 499          *     Implementation note: The SPU-side code
 500          *     for save/restore is privileged, so the
 501          *     MFC_SR1[Pr] bit is not set.
 502          *
 503          */
 504         spu_mfc_sr1_set(spu, (MFC_STATE1_MASTER_RUN_CONTROL_MASK |
 505                               MFC_STATE1_RELOCATE_MASK |
 506                               MFC_STATE1_BUS_TLBIE_MASK));
 507 }
 508
 509 static inline void save_spu_npc(struct spu_state *csa, struct spu *spu)
 510 {
 511         struct spu_problem __iomem *prob = spu->problem;
 512
 513         /* Save, Step 31:
 514          *     Save SPU_NPC in the CSA.
 515          */
 516         csa->prob.spu_npc_RW = in_be32(&prob->spu_npc_RW);
 517 }
 518
 519 static inline void save_spu_privcntl(struct spu_state *csa, struct spu *spu)
 520 {
 521         struct spu_priv2 __iomem *priv2 = spu->priv2;
 522
 523         /* Save, Step 32:
 524          *     Save SPU_PrivCntl in the CSA.
 525          */
 526         csa->priv2.spu_privcntl_RW = in_be64(&priv2->spu_privcntl_RW);
 527 }
 528
 529 static inline void reset_spu_privcntl(struct spu_state *csa, struct spu *spu)
 530 {
 531         struct spu_priv2 __iomem *priv2 = spu->priv2;
 532
 533         /* Save, Step 33:
 534          * Restore, Step 16:
 535          *     Write SPU_PrivCntl[S,Le,A] fields reset to 0.
 536          */
 537         out_be64(&priv2->spu_privcntl_RW, 0UL);
 538         eieio();
 539 }
 540
 541 static inline void save_spu_lslr(struct spu_state *csa, struct spu *spu)
 542 {
 543         struct spu_priv2 __iomem *priv2 = spu->priv2;
 544
 545         /* Save, Step 34:
 546          *     Save SPU_LSLR in the CSA.
 547          */
 548         csa->priv2.spu_lslr_RW = in_be64(&priv2->spu_lslr_RW);
 549 }
 550
 551 static inline void reset_spu_lslr(struct spu_state *csa, struct spu *spu)
 552 {
 553         struct spu_priv2 __iomem *priv2 = spu->priv2;
 554
 555         /* Save, Step 35:
 556          * Restore, Step 17.
 557          *     Reset SPU_LSLR.
 558          */
 559         out_be64(&priv2->spu_lslr_RW, LS_ADDR_MASK);
 560         eieio();
 561 }
 562
 563 static inline void save_spu_cfg(struct spu_state *csa, struct spu *spu)
 564 {
 565         struct spu_priv2 __iomem *priv2 = spu->priv2;
 566
 567         /* Save, Step 36:
 568          *     Save SPU_Cfg in the CSA.
 569          */
 570         csa->priv2.spu_cfg_RW = in_be64(&priv2->spu_cfg_RW);
 571 }
 572
 573 static inline void save_pm_trace(struct spu_state *csa, struct spu *spu)
 574 {
 575         /* Save, Step 37:
 576          *     Save PM_Trace_Tag_Wait_Mask in the CSA.
 577          *     Not performed by this implementation.
 578          */
 579 }
 580
 581 static inline void save_mfc_rag(struct spu_state *csa, struct spu *spu)
 582 {
 583         /* Save, Step 38:
 584          *     Save RA_GROUP_ID register and the
 585          *     RA_ENABLE reigster in the CSA.
 586          */
 587         csa->priv1.resource_allocation_groupID_RW =
 588                 spu_resource_allocation_groupID_get(spu);
 589         csa->priv1.resource_allocation_enable_RW =
 590                 spu_resource_allocation_enable_get(spu);
 591 }
 592
 593 static inline void save_ppu_mb_stat(struct spu_state *csa, struct spu *spu)
 594 {
 595         struct spu_problem __iomem *prob = spu->problem;
 596
 597         /* Save, Step 39:
 598          *     Save MB_Stat register in the CSA.
 599          */
 600         csa->prob.mb_stat_R = in_be32(&prob->mb_stat_R);
 601 }
 602
 603 static inline void save_ppu_mb(struct spu_state *csa, struct spu *spu)
 604 {
 605         struct spu_problem __iomem *prob = spu->problem;
 606
 607         /* Save, Step 40:
 608          *     Save the PPU_MB register in the CSA.
 609          */
 610         csa->prob.pu_mb_R = in_be32(&prob->pu_mb_R);
 611 }
 612
 613 static inline void save_ppuint_mb(struct spu_state *csa, struct spu *spu)
 614 {
 615         struct spu_priv2 __iomem *priv2 = spu->priv2;
 616
 617         /* Save, Step 41:
 618          *     Save the PPUINT_MB register in the CSA.
 619          */
 620         csa->priv2.puint_mb_R = in_be64(&priv2->puint_mb_R);
 621 }
 622
 623 static inline void save_ch_part1(struct spu_state *csa, struct spu *spu)
 624 {
 625         struct spu_priv2 __iomem *priv2 = spu->priv2;
 626         u64 idx, ch_indices[7] = { 0UL, 3UL, 4UL, 24UL, 25UL, 27UL };
 627         int i;
 628
 629         /* Save, Step 42:
 630          */
 631
 632         /* Save CH 1, without channel count */
 633         out_be64(&priv2->spu_chnlcntptr_RW, 1);
 634         csa->spu_chnldata_RW[1] = in_be64(&priv2->spu_chnldata_RW);
 635
 636         /* Save the following CH: [0,3,4,24,25,27] */
 637         for (i = 0; i < 7; i++) {
 638                 idx = ch_indices[i];
 639                 out_be64(&priv2->spu_chnlcntptr_RW, idx);
 640                 eieio();
 641                 csa->spu_chnldata_RW[idx] = in_be64(&priv2->spu_chnldata_RW);
 642                 csa->spu_chnlcnt_RW[idx] = in_be64(&priv2->spu_chnlcnt_RW);
 643                 out_be64(&priv2->spu_chnldata_RW, 0UL);
 644                 out_be64(&priv2->spu_chnlcnt_RW, 0UL);
 645                 eieio();
 646         }
 647 }
 648
 649 static inline void save_spu_mb(struct spu_state *csa, struct spu *spu)
 650 {
 651         struct spu_priv2 __iomem *priv2 = spu->priv2;
 652         int i;
 653
 654         /* Save, Step 43:
 655          *     Save SPU Read Mailbox Channel.
 656          */
 657         out_be64(&priv2->spu_chnlcntptr_RW, 29UL);
 658         eieio();
 659         csa->spu_chnlcnt_RW[29] = in_be64(&priv2->spu_chnlcnt_RW);
 660         for (i = 0; i < 4; i++) {
 661                 csa->spu_mailbox_data[i] = in_be64(&priv2->spu_chnldata_RW);
 662         }
 663         out_be64(&priv2->spu_chnlcnt_RW, 0UL);
 664         eieio();
 665 }
 666
 667 static inline void save_mfc_cmd(struct spu_state *csa, struct spu *spu)
 668 {
 669         struct spu_priv2 __iomem *priv2 = spu->priv2;
 670
 671         /* Save, Step 44:
 672          *     Save MFC_CMD Channel.
 673          */
 674         out_be64(&priv2->spu_chnlcntptr_RW, 21UL);
 675         eieio();
 676         csa->spu_chnlcnt_RW[21] = in_be64(&priv2->spu_chnlcnt_RW);
 677         eieio();
 678 }
 679
 680 static inline void reset_ch(struct spu_state *csa, struct spu *spu)
 681 {
 682         struct spu_priv2 __iomem *priv2 = spu->priv2;
 683         u64 ch_indices[4] = { 21UL, 23UL, 28UL, 30UL };
 684         u64 ch_counts[4] = { 16UL, 1UL, 1UL, 1UL };
 685         u64 idx;
 686         int i;
 687
 688         /* Save, Step 45:
 689          *     Reset the following CH: [21, 23, 28, 30]
 690          */
 691         for (i = 0; i < 4; i++) {
 692                 idx = ch_indices[i];
 693                 out_be64(&priv2->spu_chnlcntptr_RW, idx);
 694                 eieio();
 695                 out_be64(&priv2->spu_chnlcnt_RW, ch_counts[i]);
 696                 eieio();
 697         }
 698 }
 699
 700 static inline void resume_mfc_queue(struct spu_state *csa, struct spu *spu)
 701 {
 702         struct spu_priv2 __iomem *priv2 = spu->priv2;
 703
 704         /* Save, Step 46:
 705          * Restore, Step 25.
 706          *     Write MFC_CNTL[Sc]=0 (resume queue processing).
 707          */
 708         out_be64(&priv2->mfc_control_RW, MFC_CNTL_RESUME_DMA_QUEUE);
 709 }
 710
 711 static inline void invalidate_slbs(struct spu_state *csa, struct spu *spu)
 712 {
 713         struct spu_priv2 __iomem *priv2 = spu->priv2;
 714
 715         /* Save, Step 45:
 716          * Restore, Step 19:
 717          *     If MFC_SR1[R]=1, write 0 to SLB_Invalidate_All.
 718          */
 719         if (spu_mfc_sr1_get(spu) & MFC_STATE1_RELOCATE_MASK) {
 720                 out_be64(&priv2->slb_invalidate_all_W, 0UL);
 721                 eieio();
 722         }
 723 }
 724
 725 static inline void get_kernel_slb(u64 ea, u64 slb[2])
 726 {
 727         u64 llp;
 728
 729         if (REGION_ID(ea) == KERNEL_REGION_ID)
 730                 llp = mmu_psize_defs[mmu_linear_psize].sllp;
 731         else
 732                 llp = mmu_psize_defs[mmu_virtual_psize].sllp;
 733         slb[0] = (get_kernel_vsid(ea) << SLB_VSID_SHIFT) |
 734                 SLB_VSID_KERNEL | llp;
 735         slb[1] = (ea & ESID_MASK) | SLB_ESID_V;
 736 }
 737
 738 static inline void load_mfc_slb(struct spu *spu, u64 slb[2], int slbe)
 739 {
 740         struct spu_priv2 __iomem *priv2 = spu->priv2;
 741
 742         out_be64(&priv2->slb_index_W, slbe);
 743         eieio();
 744         out_be64(&priv2->slb_vsid_RW, slb[0]);
 745         out_be64(&priv2->slb_esid_RW, slb[1]);
 746         eieio();
 747 }
 748
 749 static inline void setup_mfc_slbs(struct spu_state *csa, struct spu *spu)
 750 {
 751         u64 code_slb[2];
 752         u64 lscsa_slb[2];
 753
 754         /* Save, Step 47:
 755          * Restore, Step 30.
 756          *     If MFC_SR1[R]=1, write 0 to SLB_Invalidate_All
 757          *     register, then initialize SLB_VSID and SLB_ESID
 758          *     to provide access to SPU context save code and
 759          *     LSCSA.
 760          *
 761          *     This implementation places both the context
 762          *     switch code and LSCSA in kernel address space.
 763          *
 764          *     Further this implementation assumes that the
 765          *     MFC_SR1[R]=1 (in other words, assume that
 766          *     translation is desired by OS environment).
 767          */
 768         invalidate_slbs(csa, spu);
 769         get_kernel_slb((unsigned long)&spu_save_code[0], code_slb);
 770         get_kernel_slb((unsigned long)csa->lscsa, lscsa_slb);
 771         load_mfc_slb(spu, code_slb, 0);
 772         if ((lscsa_slb[0] != code_slb[0]) || (lscsa_slb[1] != code_slb[1]))
 773                 load_mfc_slb(spu, lscsa_slb, 1);
 774 }
 775
 776 static inline void set_switch_active(struct spu_state *csa, struct spu *spu)
 777 {
 778         /* Save, Step 48:
 779          * Restore, Step 23.
 780          *     Change the software context switch pending flag
 781          *     to context switch active.
 782          */
 783         set_bit(SPU_CONTEXT_SWITCH_ACTIVE, &spu->flags);
 784         clear_bit(SPU_CONTEXT_SWITCH_PENDING, &spu->flags);
 785         mb();
 786 }
 787
 788 static inline void enable_interrupts(struct spu_state *csa, struct spu *spu)
 789 {
 790         unsigned long class1_mask = CLASS1_ENABLE_SEGMENT_FAULT_INTR |
 791             CLASS1_ENABLE_STORAGE_FAULT_INTR;
 792
 793         /* Save, Step 49:
 794          * Restore, Step 22:
 795          *     Reset and then enable interrupts, as
 796          *     needed by OS.
 797          *
 798          *     This implementation enables only class1
 799          *     (translation) interrupts.
 800          */
 801         spin_lock_irq(&spu->register_lock);
 802         spu_int_stat_clear(spu, 0, ~0ul);
 803         spu_int_stat_clear(spu, 1, ~0ul);
 804         spu_int_stat_clear(spu, 2, ~0ul);
 805         spu_int_mask_set(spu, 0, 0ul);
 806         spu_int_mask_set(spu, 1, class1_mask);
 807         spu_int_mask_set(spu, 2, 0ul);
 808         spin_unlock_irq(&spu->register_lock);
 809 }
 810
 811 static inline int send_mfc_dma(struct spu *spu, unsigned long ea,
 812                                unsigned int ls_offset, unsigned int size,
 813                                unsigned int tag, unsigned int rclass,
 814                                unsigned int cmd)
 815 {
 816         struct spu_problem __iomem *prob = spu->problem;
 817         union mfc_tag_size_class_cmd command;
 818         unsigned int transfer_size;
 819         volatile unsigned int status = 0x0;
 820
 821         while (size > 0) {
 822                 transfer_size =
 823                     (size > MFC_MAX_DMA_SIZE) ? MFC_MAX_DMA_SIZE : size;
 824                 command.u.mfc_size = transfer_size;
 825                 command.u.mfc_tag = tag;
 826                 command.u.mfc_rclassid = rclass;
 827                 command.u.mfc_cmd = cmd;
 828                 do {
 829                         out_be32(&prob->mfc_lsa_W, ls_offset);
 830                         out_be64(&prob->mfc_ea_W, ea);
 831                         out_be64(&prob->mfc_union_W.all64, command.all64);
 832                         status =
 833                             in_be32(&prob->mfc_union_W.by32.mfc_class_cmd32);
 834                         if (unlikely(status & 0x2)) {
 835                                 cpu_relax();
 836                         }
 837                 } while (status & 0x3);
 838                 size -= transfer_size;
 839                 ea += transfer_size;
 840                 ls_offset += transfer_size;
 841         }
 842         return 0;
 843 }
 844
 845 static inline void save_ls_16kb(struct spu_state *csa, struct spu *spu)
 846 {
 847         unsigned long addr = (unsigned long)&csa->lscsa->ls[0];
 848         unsigned int ls_offset = 0x0;
 849         unsigned int size = 16384;
 850         unsigned int tag = 0;
 851         unsigned int rclass = 0;
 852         unsigned int cmd = MFC_PUT_CMD;
 853
 854         /* Save, Step 50:
 855          *     Issue a DMA command to copy the first 16K bytes
 856          *     of local storage to the CSA.
 857          */
 858         send_mfc_dma(spu, addr, ls_offset, size, tag, rclass, cmd);
 859 }
 860
 861 static inline void set_spu_npc(struct spu_state *csa, struct spu *spu)
 862 {
 863         struct spu_problem __iomem *prob = spu->problem;
 864
 865         /* Save, Step 51:
 866          * Restore, Step 31.
 867          *     Write SPU_NPC[IE]=0 and SPU_NPC[LSA] to entry
 868          *     point address of context save code in local
 869          *     storage.
 870          *
 871          *     This implementation uses SPU-side save/restore
 872          *     programs with entry points at LSA of 0.
 873          */
 874         out_be32(&prob->spu_npc_RW, 0);
 875         eieio();
 876 }
 877
 878 static inline void set_signot1(struct spu_state *csa, struct spu *spu)
 879 {
 880         struct spu_problem __iomem *prob = spu->problem;
 881         union {
 882                 u64 ull;
 883                 u32 ui[2];
 884         } addr64;
 885
 886         /* Save, Step 52:
 887          * Restore, Step 32:
 888          *    Write SPU_Sig_Notify_1 register with upper 32-bits
 889          *    of the CSA.LSCSA effective address.
 890          */
 891         addr64.ull = (u64) csa->lscsa;
 892         out_be32(&prob->signal_notify1, addr64.ui[0]);
 893         eieio();
 894 }
 895
 896 static inline void set_signot2(struct spu_state *csa, struct spu *spu)
 897 {
 898         struct spu_problem __iomem *prob = spu->problem;
 899         union {
 900                 u64 ull;
 901                 u32 ui[2];
 902         } addr64;
 903
 904         /* Save, Step 53:
 905          * Restore, Step 33:
 906          *    Write SPU_Sig_Notify_2 register with lower 32-bits
 907          *    of the CSA.LSCSA effective address.
 908          */
 909         addr64.ull = (u64) csa->lscsa;
 910         out_be32(&prob->signal_notify2, addr64.ui[1]);
 911         eieio();
 912 }
 913
 914 static inline void send_save_code(struct spu_state *csa, struct spu *spu)
 915 {
 916         unsigned long addr = (unsigned long)&spu_save_code[0];
 917         unsigned int ls_offset = 0x0;
 918         unsigned int size = sizeof(spu_save_code);
 919         unsigned int tag = 0;
 920         unsigned int rclass = 0;
 921         unsigned int cmd = MFC_GETFS_CMD;
 922
 923         /* Save, Step 54:
 924          *     Issue a DMA command to copy context save code
 925          *     to local storage and start SPU.
 926          */
 927         send_mfc_dma(spu, addr, ls_offset, size, tag, rclass, cmd);
 928 }
 929
 930 static inline void set_ppu_querymask(struct spu_state *csa, struct spu *spu)
 931 {
 932         struct spu_problem __iomem *prob = spu->problem;
 933
 934         /* Save, Step 55:
 935          * Restore, Step 38.
 936          *     Write PPU_QueryMask=1 (enable Tag Group 0)
 937          *     and issue eieio instruction.
 938          */
 939         out_be32(&prob->dma_querymask_RW, MFC_TAGID_TO_TAGMASK(0));
 940         eieio();
 941 }
 942
 943 static inline void wait_tag_complete(struct spu_state *csa, struct spu *spu)
 944 {
 945         struct spu_problem __iomem *prob = spu->problem;
 946         u32 mask = MFC_TAGID_TO_TAGMASK(0);
 947         unsigned long flags;
 948
 949         /* Save, Step 56:
 950          * Restore, Step 39.
 951          * Restore, Step 39.
 952          * Restore, Step 46.
 953          *     Poll PPU_TagStatus[gn] until 01 (Tag group 0 complete)
 954          *     or write PPU_QueryType[TS]=01 and wait for Tag Group
 955          *     Complete Interrupt.  Write INT_Stat_Class0 or
 956          *     INT_Stat_Class2 with value of 'handled'.
 957          */
 958         POLL_WHILE_FALSE(in_be32(&prob->dma_tagstatus_R) & mask);
 959
 960         local_irq_save(flags);
 961         spu_int_stat_clear(spu, 0, ~(0ul));
 962         spu_int_stat_clear(spu, 2, ~(0ul));
 963         local_irq_restore(flags);
 964 }
 965
 966 static inline void wait_spu_stopped(struct spu_state *csa, struct spu *spu)
 967 {
 968         struct spu_problem __iomem *prob = spu->problem;
 969         unsigned long flags;
 970
 971         /* Save, Step 57:
 972          * Restore, Step 40.
 973          *     Poll until SPU_Status[R]=0 or wait for SPU Class 0
 974          *     or SPU Class 2 interrupt.  Write INT_Stat_class0
 975          *     or INT_Stat_class2 with value of handled.
 976          */
 977         POLL_WHILE_TRUE(in_be32(&prob->spu_status_R) & SPU_STATUS_RUNNING);
 978
 979         local_irq_save(flags);
 980         spu_int_stat_clear(spu, 0, ~(0ul));
 981         spu_int_stat_clear(spu, 2, ~(0ul));
 982         local_irq_restore(flags);
 983 }
 984
 985 static inline int check_save_status(struct spu_state *csa, struct spu *spu)
 986 {
 987         struct spu_problem __iomem *prob = spu->problem;
 988         u32 complete;
 989
 990         /* Save, Step 54:
 991          *     If SPU_Status[P]=1 and SPU_Status[SC] = "success",
 992          *     context save succeeded, otherwise context save
 993          *     failed.
 994          */
 995         complete = ((SPU_SAVE_COMPLETE << SPU_STOP_STATUS_SHIFT) |
 996                     SPU_STATUS_STOPPED_BY_STOP);
 997         return (in_be32(&prob->spu_status_R) != complete) ? 1 : 0;
 998 }
 999
1000 static inline void terminate_spu_app(struct spu_state *csa, struct spu *spu)
1001 {
1002         /* Restore, Step 4:
1003          *    If required, notify the "using application" that
1004          *    the SPU task has been terminated.  TBD.
1005          */
1006 }
1007
1008 static inline void suspend_mfc(struct spu_state *csa, struct spu *spu)
1009 {
1010         struct spu_priv2 __iomem *priv2 = spu->priv2;
1011
1012         /* Restore, Step 7:
1013          * Restore, Step 47.
1014          *     Write MFC_Cntl[Dh,Sc]='1','1' to suspend
1015          *     the queue and halt the decrementer.
1016          */
1017         out_be64(&priv2->mfc_control_RW, MFC_CNTL_SUSPEND_DMA_QUEUE |
1018                  MFC_CNTL_DECREMENTER_HALTED);
1019         eieio();
1020 }
1021
1022 static inline void wait_suspend_mfc_complete(struct spu_state *csa,
1023                                              struct spu *spu)
1024 {
1025         struct spu_priv2 __iomem *priv2 = spu->priv2;
1026
1027         /* Restore, Step 8:
1028          * Restore, Step 47.
1029          *     Poll MFC_CNTL[Ss] until 11 is returned.
1030          */
1031         POLL_WHILE_FALSE((in_be64(&priv2->mfc_control_RW) &
1032                          MFC_CNTL_SUSPEND_DMA_STATUS_MASK) ==
1033                          MFC_CNTL_SUSPEND_COMPLETE);
1034 }
1035
1036 static inline int suspend_spe(struct spu_state *csa, struct spu *spu)
1037 {
1038         struct spu_problem __iomem *prob = spu->problem;
1039
1040         /* Restore, Step 9:
1041          *    If SPU_Status[R]=1, stop SPU execution
1042          *    and wait for stop to complete.
1043          *
1044          *    Returns       1 if SPU_Status[R]=1 on entry.
1045          *                  0 otherwise
1046          */
1047         if (in_be32(&prob->spu_status_R) & SPU_STATUS_RUNNING) {
1048                 if (in_be32(&prob->spu_status_R) &
1049                     SPU_STATUS_ISOLATED_EXIT_STAUTUS) {
1050                         POLL_WHILE_TRUE(in_be32(&prob->spu_status_R) &
1051                                         SPU_STATUS_RUNNING);
1052                 }
1053                 if ((in_be32(&prob->spu_status_R) &
1054                      SPU_STATUS_ISOLATED_LOAD_STAUTUS)
1055                     || (in_be32(&prob->spu_status_R) &
1056                         SPU_STATUS_ISOLATED_STATE)) {
1057                         out_be32(&prob->spu_runcntl_RW, SPU_RUNCNTL_STOP);
1058                         eieio();
1059                         POLL_WHILE_TRUE(in_be32(&prob->spu_status_R) &
1060                                         SPU_STATUS_RUNNING);
1061                         out_be32(&prob->spu_runcntl_RW, 0x2);
1062                         eieio();
1063                         POLL_WHILE_TRUE(in_be32(&prob->spu_status_R) &
1064                                         SPU_STATUS_RUNNING);
1065                 }
1066                 if (in_be32(&prob->spu_status_R) &
1067                     SPU_STATUS_WAITING_FOR_CHANNEL) {
1068                         out_be32(&prob->spu_runcntl_RW, SPU_RUNCNTL_STOP);
1069                         eieio();
1070                         POLL_WHILE_TRUE(in_be32(&prob->spu_status_R) &
1071                                         SPU_STATUS_RUNNING);
1072                 }
1073                 return 1;
1074         }
1075         return 0;
1076 }
1077
1078 static inline void clear_spu_status(struct spu_state *csa, struct spu *spu)
1079 {
1080         struct spu_problem __iomem *prob = spu->problem;
1081
1082         /* Restore, Step 10:
1083          *    If SPU_Status[R]=0 and SPU_Status[E,L,IS]=1,
1084          *    release SPU from isolate state.
1085          */
1086         if (!(in_be32(&prob->spu_status_R) & SPU_STATUS_RUNNING)) {
1087                 if (in_be32(&prob->spu_status_R) &
1088                     SPU_STATUS_ISOLATED_EXIT_STAUTUS) {
1089                         spu_mfc_sr1_set(spu,
1090                                         MFC_STATE1_MASTER_RUN_CONTROL_MASK);
1091                         eieio();
1092                         out_be32(&prob->spu_runcntl_RW, SPU_RUNCNTL_RUNNABLE);
1093                         eieio();
1094                         POLL_WHILE_TRUE(in_be32(&prob->spu_status_R) &
1095                                         SPU_STATUS_RUNNING);
1096                 }
1097                 if ((in_be32(&prob->spu_status_R) &
1098                      SPU_STATUS_ISOLATED_LOAD_STAUTUS)
1099                     || (in_be32(&prob->spu_status_R) &
1100                         SPU_STATUS_ISOLATED_STATE)) {
1101                         spu_mfc_sr1_set(spu,
1102                                         MFC_STATE1_MASTER_RUN_CONTROL_MASK);
1103                         eieio();
1104                         out_be32(&prob->spu_runcntl_RW, 0x2);
1105                         eieio();
1106                         POLL_WHILE_TRUE(in_be32(&prob->spu_status_R) &
1107                                         SPU_STATUS_RUNNING);
1108                 }
1109         }
1110 }
1111
1112 static inline void reset_ch_part1(struct spu_state *csa, struct spu *spu)
1113 {
1114         struct spu_priv2 __iomem *priv2 = spu->priv2;
1115         u64 ch_indices[7] = { 0UL, 3UL, 4UL, 24UL, 25UL, 27UL };
1116         u64 idx;
1117         int i;
1118
1119         /* Restore, Step 20:
1120          */
1121
1122         /* Reset CH 1 */
1123         out_be64(&priv2->spu_chnlcntptr_RW, 1);
1124         out_be64(&priv2->spu_chnldata_RW, 0UL);
1125
1126         /* Reset the following CH: [0,3,4,24,25,27] */
1127         for (i = 0; i < 7; i++) {
1128                 idx = ch_indices[i];
1129                 out_be64(&priv2->spu_chnlcntptr_RW, idx);
1130                 eieio();
1131                 out_be64(&priv2->spu_chnldata_RW, 0UL);
1132                 out_be64(&priv2->spu_chnlcnt_RW, 0UL);
1133                 eieio();
1134         }
1135 }
1136
1137 static inline void reset_ch_part2(struct spu_state *csa, struct spu *spu)
1138 {
1139         struct spu_priv2 __iomem *priv2 = spu->priv2;
1140         u64 ch_indices[5] = { 21UL, 23UL, 28UL, 29UL, 30UL };
1141         u64 ch_counts[5] = { 16UL, 1UL, 1UL, 0UL, 1UL };
1142         u64 idx;
1143         int i;
1144
1145         /* Restore, Step 21:
1146          *     Reset the following CH: [21, 23, 28, 29, 30]
1147          */
1148         for (i = 0; i < 5; i++) {
1149                 idx = ch_indices[i];
1150                 out_be64(&priv2->spu_chnlcntptr_RW, idx);
1151                 eieio();
1152                 out_be64(&priv2->spu_chnlcnt_RW, ch_counts[i]);
1153                 eieio();
1154         }
1155 }
1156
1157 static inline void setup_spu_status_part1(struct spu_state *csa,
1158                                           struct spu *spu)
1159 {
1160         u32 status_P = SPU_STATUS_STOPPED_BY_STOP;
1161         u32 status_I = SPU_STATUS_INVALID_INSTR;
1162         u32 status_H = SPU_STATUS_STOPPED_BY_HALT;
1163         u32 status_S = SPU_STATUS_SINGLE_STEP;
1164         u32 status_S_I = SPU_STATUS_SINGLE_STEP | SPU_STATUS_INVALID_INSTR;
1165         u32 status_S_P = SPU_STATUS_SINGLE_STEP | SPU_STATUS_STOPPED_BY_STOP;
1166         u32 status_P_H = SPU_STATUS_STOPPED_BY_HALT |SPU_STATUS_STOPPED_BY_STOP;
1167         u32 status_P_I = SPU_STATUS_STOPPED_BY_STOP |SPU_STATUS_INVALID_INSTR;
1168         u32 status_code;
1169
1170         /* Restore, Step 27:
1171          *     If the CSA.SPU_Status[I,S,H,P]=1 then add the correct
1172          *     instruction sequence to the end of the SPU based restore
1173          *     code (after the "context restored" stop and signal) to
1174          *     restore the correct SPU status.
1175          *
1176          *     NOTE: Rather than modifying the SPU executable, we
1177          *     instead add a new 'stopped_status' field to the
1178          *     LSCSA.  The SPU-side restore reads this field and
1179          *     takes the appropriate action when exiting.
1180          */
1181
1182         status_code =
1183             (csa->prob.spu_status_R >> SPU_STOP_STATUS_SHIFT) & 0xFFFF;
1184         if ((csa->prob.spu_status_R & status_P_I) == status_P_I) {
1185
1186                 /* SPU_Status[P,I]=1 - Illegal Instruction followed
1187                  * by Stop and Signal instruction, followed by 'br -4'.
1188                  *
1189                  */
1190                 csa->lscsa->stopped_status.slot[0] = SPU_STOPPED_STATUS_P_I;
1191                 csa->lscsa->stopped_status.slot[1] = status_code;
1192
1193         } else if ((csa->prob.spu_status_R & status_P_H) == status_P_H) {
1194
1195                 /* SPU_Status[P,H]=1 - Halt Conditional, followed
1196                  * by Stop and Signal instruction, followed by
1197                  * 'br -4'.
1198                  */
1199                 csa->lscsa->stopped_status.slot[0] = SPU_STOPPED_STATUS_P_H;
1200                 csa->lscsa->stopped_status.slot[1] = status_code;
1201
1202         } else if ((csa->prob.spu_status_R & status_S_P) == status_S_P) {
1203
1204                 /* SPU_Status[S,P]=1 - Stop and Signal instruction
1205                  * followed by 'br -4'.
1206                  */
1207                 csa->lscsa->stopped_status.slot[0] = SPU_STOPPED_STATUS_S_P;
1208                 csa->lscsa->stopped_status.slot[1] = status_code;
1209
1210         } else if ((csa->prob.spu_status_R & status_S_I) == status_S_I) {
1211
1212                 /* SPU_Status[S,I]=1 - Illegal instruction followed
1213                  * by 'br -4'.
1214                  */
1215                 csa->lscsa->stopped_status.slot[0] = SPU_STOPPED_STATUS_S_I;
1216                 csa->lscsa->stopped_status.slot[1] = status_code;
1217
1218         } else if ((csa->prob.spu_status_R & status_P) == status_P) {
1219
1220                 /* SPU_Status[P]=1 - Stop and Signal instruction
1221                  * followed by 'br -4'.
1222                  */
1223                 csa->lscsa->stopped_status.slot[0] = SPU_STOPPED_STATUS_P;
1224                 csa->lscsa->stopped_status.slot[1] = status_code;
1225
1226         } else if ((csa->prob.spu_status_R & status_H) == status_H) {
1227
1228                 /* SPU_Status[H]=1 - Halt Conditional, followed
1229                  * by 'br -4'.
1230                  */
1231                 csa->lscsa->stopped_status.slot[0] = SPU_STOPPED_STATUS_H;
1232
1233         } else if ((csa->prob.spu_status_R & status_S) == status_S) {
1234
1235                 /* SPU_Status[S]=1 - Two nop instructions.
1236                  */
1237                 csa->lscsa->stopped_status.slot[0] = SPU_STOPPED_STATUS_S;
1238
1239         } else if ((csa->prob.spu_status_R & status_I) == status_I) {
1240
1241                 /* SPU_Status[I]=1 - Illegal instruction followed
1242                  * by 'br -4'.
1243                  */
1244                 csa->lscsa->stopped_status.slot[0] = SPU_STOPPED_STATUS_I;
1245
1246         }
1247 }
1248
1249 static inline void setup_spu_status_part2(struct spu_state *csa,
1250                                           struct spu *spu)
1251 {
1252         u32 mask;
1253
1254         /* Restore, Step 28:
1255          *     If the CSA.SPU_Status[I,S,H,P,R]=0 then
1256          *     add a 'br *' instruction to the end of
1257          *     the SPU based restore code.
1258          *
1259          *     NOTE: Rather than modifying the SPU executable, we
1260          *     instead add a new 'stopped_status' field to the
1261          *     LSCSA.  The SPU-side restore reads this field and
1262          *     takes the appropriate action when exiting.
1263          */
1264         mask = SPU_STATUS_INVALID_INSTR |
1265             SPU_STATUS_SINGLE_STEP |
1266             SPU_STATUS_STOPPED_BY_HALT |
1267             SPU_STATUS_STOPPED_BY_STOP | SPU_STATUS_RUNNING;
1268         if (!(csa->prob.spu_status_R & mask)) {
1269                 csa->lscsa->stopped_status.slot[0] = SPU_STOPPED_STATUS_R;
1270         }
1271 }
1272
1273 static inline void restore_mfc_rag(struct spu_state *csa, struct spu *spu)
1274 {
1275         /* Restore, Step 29:
1276          *     Restore RA_GROUP_ID register and the
1277          *     RA_ENABLE reigster from the CSA.
1278          */
1279         spu_resource_allocation_groupID_set(spu,
1280                         csa->priv1.resource_allocation_groupID_RW);
1281         spu_resource_allocation_enable_set(spu,
1282                         csa->priv1.resource_allocation_enable_RW);
1283 }
1284
1285 static inline void send_restore_code(struct spu_state *csa, struct spu *spu)
1286 {
1287         unsigned long addr = (unsigned long)&spu_restore_code[0];
1288         unsigned int ls_offset = 0x0;
1289         unsigned int size = sizeof(spu_restore_code);
1290         unsigned int tag = 0;
1291         unsigned int rclass = 0;
1292         unsigned int cmd = MFC_GETFS_CMD;
1293
1294         /* Restore, Step 37:
1295          *     Issue MFC DMA command to copy context
1296          *     restore code to local storage.
1297          */
1298         send_mfc_dma(spu, addr, ls_offset, size, tag, rclass, cmd);
1299 }
1300
1301 static inline void setup_decr(struct spu_state *csa, struct spu *spu)
1302 {
1303         /* Restore, Step 34:
1304          *     If CSA.MFC_CNTL[Ds]=1 (decrementer was
1305          *     running) then adjust decrementer, set
1306          *     decrementer running status in LSCSA,
1307          *     and set decrementer "wrapped" status
1308          *     in LSCSA.
1309          */
1310         if (csa->priv2.mfc_control_RW & MFC_CNTL_DECREMENTER_RUNNING) {
1311                 cycles_t resume_time = get_cycles();
1312                 cycles_t delta_time = resume_time - csa->suspend_time;
1313
1314                 csa->lscsa->decr.slot[0] -= delta_time;
1315         }
1316 }
1317
1318 static inline void setup_ppu_mb(struct spu_state *csa, struct spu *spu)
1319 {
1320         /* Restore, Step 35:
1321          *     Copy the CSA.PU_MB data into the LSCSA.
1322          */
1323         csa->lscsa->ppu_mb.slot[0] = csa->prob.pu_mb_R;
1324 }
1325
1326 static inline void setup_ppuint_mb(struct spu_state *csa, struct spu *spu)
1327 {
1328         /* Restore, Step 36:
1329          *     Copy the CSA.PUINT_MB data into the LSCSA.
1330          */
1331         csa->lscsa->ppuint_mb.slot[0] = csa->priv2.puint_mb_R;
1332 }
1333
1334 static inline int check_restore_status(struct spu_state *csa, struct spu *spu)
1335 {
1336         struct spu_problem __iomem *prob = spu->problem;
1337         u32 complete;
1338
1339         /* Restore, Step 40:
1340          *     If SPU_Status[P]=1 and SPU_Status[SC] = "success",
1341          *     context restore succeeded, otherwise context restore
1342          *     failed.
1343          */
1344         complete = ((SPU_RESTORE_COMPLETE << SPU_STOP_STATUS_SHIFT) |
1345                     SPU_STATUS_STOPPED_BY_STOP);
1346         return (in_be32(&prob->spu_status_R) != complete) ? 1 : 0;
1347 }
1348
1349 static inline void restore_spu_privcntl(struct spu_state *csa, struct spu *spu)
1350 {
1351         struct spu_priv2 __iomem *priv2 = spu->priv2;
1352
1353         /* Restore, Step 41:
1354          *     Restore SPU_PrivCntl from the CSA.
1355          */
1356         out_be64(&priv2->spu_privcntl_RW, csa->priv2.spu_privcntl_RW);
1357         eieio();
1358 }
1359
1360 static inline void restore_status_part1(struct spu_state *csa, struct spu *spu)
1361 {
1362         struct spu_problem __iomem *prob = spu->problem;
1363         u32 mask;
1364
1365         /* Restore, Step 42:
1366          *     If any CSA.SPU_Status[I,S,H,P]=1, then
1367          *     restore the error or single step state.
1368          */
1369         mask = SPU_STATUS_INVALID_INSTR |
1370             SPU_STATUS_SINGLE_STEP |
1371             SPU_STATUS_STOPPED_BY_HALT | SPU_STATUS_STOPPED_BY_STOP;
1372         if (csa->prob.spu_status_R & mask) {
1373                 out_be32(&prob->spu_runcntl_RW, SPU_RUNCNTL_RUNNABLE);
1374                 eieio();
1375                 POLL_WHILE_TRUE(in_be32(&prob->spu_status_R) &
1376                                 SPU_STATUS_RUNNING);
1377         }
1378 }
1379
1380 static inline void restore_status_part2(struct spu_state *csa, struct spu *spu)
1381 {
1382         struct spu_problem __iomem *prob = spu->problem;
1383         u32 mask;
1384
1385         /* Restore, Step 43:
1386          *     If all CSA.SPU_Status[I,S,H,P,R]=0 then write
1387          *     SPU_RunCntl[R0R1]='01', wait for SPU_Status[R]=1,
1388          *     then write '00' to SPU_RunCntl[R0R1] and wait
1389          *     for SPU_Status[R]=0.
1390          */
1391         mask = SPU_STATUS_INVALID_INSTR |
1392             SPU_STATUS_SINGLE_STEP |
1393             SPU_STATUS_STOPPED_BY_HALT |
1394             SPU_STATUS_STOPPED_BY_STOP | SPU_STATUS_RUNNING;
1395         if (!(csa->prob.spu_status_R & mask)) {
1396                 out_be32(&prob->spu_runcntl_RW, SPU_RUNCNTL_RUNNABLE);
1397                 eieio();
1398                 POLL_WHILE_FALSE(in_be32(&prob->spu_status_R) &
1399                                  SPU_STATUS_RUNNING);
1400                 out_be32(&prob->spu_runcntl_RW, SPU_RUNCNTL_STOP);
1401                 eieio();
1402                 POLL_WHILE_TRUE(in_be32(&prob->spu_status_R) &
1403                                 SPU_STATUS_RUNNING);
1404         }
1405 }
1406
1407 static inline void restore_ls_16kb(struct spu_state *csa, struct spu *spu)
1408 {
1409         unsigned long addr = (unsigned long)&csa->lscsa->ls[0];
1410         unsigned int ls_offset = 0x0;
1411         unsigned int size = 16384;
1412         unsigned int tag = 0;
1413         unsigned int rclass = 0;
1414         unsigned int cmd = MFC_GET_CMD;
1415
1416         /* Restore, Step 44:
1417          *     Issue a DMA command to restore the first
1418          *     16kb of local storage from CSA.
1419          */
1420         send_mfc_dma(spu, addr, ls_offset, size, tag, rclass, cmd);
1421 }
1422
1423 static inline void clear_interrupts(struct spu_state *csa, struct spu *spu)
1424 {
1425         /* Restore, Step 49:
1426          *     Write INT_MASK_class0 with value of 0.
1427          *     Write INT_MASK_class1 with value of 0.
1428          *     Write INT_MASK_class2 with value of 0.
1429          *     Write INT_STAT_class0 with value of -1.
1430          *     Write INT_STAT_class1 with value of -1.
1431          *     Write INT_STAT_class2 with value of -1.
1432          */
1433         spin_lock_irq(&spu->register_lock);
1434         spu_int_mask_set(spu, 0, 0ul);
1435         spu_int_mask_set(spu, 1, 0ul);
1436         spu_int_mask_set(spu, 2, 0ul);
1437         spu_int_stat_clear(spu, 0, ~0ul);
1438         spu_int_stat_clear(spu, 1, ~0ul);
1439         spu_int_stat_clear(spu, 2, ~0ul);
1440         spin_unlock_irq(&spu->register_lock);
1441 }
1442
1443 static inline void restore_mfc_queues(struct spu_state *csa, struct spu *spu)
1444 {
1445         struct spu_priv2 __iomem *priv2 = spu->priv2;
1446         int i;
1447
1448         /* Restore, Step 50:
1449          *     If MFC_Cntl[Se]!=0 then restore
1450          *     MFC command queues.
1451          */
1452         if ((csa->priv2.mfc_control_RW & MFC_CNTL_DMA_QUEUES_EMPTY_MASK) == 0) {
1453                 for (i = 0; i < 8; i++) {
1454                         out_be64(&priv2->puq[i].mfc_cq_data0_RW,
1455                                  csa->priv2.puq[i].mfc_cq_data0_RW);
1456                         out_be64(&priv2->puq[i].mfc_cq_data1_RW,
1457                                  csa->priv2.puq[i].mfc_cq_data1_RW);
1458                         out_be64(&priv2->puq[i].mfc_cq_data2_RW,
1459                                  csa->priv2.puq[i].mfc_cq_data2_RW);
1460                         out_be64(&priv2->puq[i].mfc_cq_data3_RW,
1461                                  csa->priv2.puq[i].mfc_cq_data3_RW);
1462                 }
1463                 for (i = 0; i < 16; i++) {
1464                         out_be64(&priv2->spuq[i].mfc_cq_data0_RW,
1465                                  csa->priv2.spuq[i].mfc_cq_data0_RW);
1466                         out_be64(&priv2->spuq[i].mfc_cq_data1_RW,
1467                                  csa->priv2.spuq[i].mfc_cq_data1_RW);
1468                         out_be64(&priv2->spuq[i].mfc_cq_data2_RW,
1469                                  csa->priv2.spuq[i].mfc_cq_data2_RW);
1470                         out_be64(&priv2->spuq[i].mfc_cq_data3_RW,
1471                                  csa->priv2.spuq[i].mfc_cq_data3_RW);
1472                 }
1473         }
1474         eieio();
1475 }
1476
1477 static inline void restore_ppu_querymask(struct spu_state *csa, struct spu *spu)
1478 {
1479         struct spu_problem __iomem *prob = spu->problem;
1480
1481         /* Restore, Step 51:
1482          *     Restore the PPU_QueryMask register from CSA.
1483          */
1484         out_be32(&prob->dma_querymask_RW, csa->prob.dma_querymask_RW);
1485         eieio();
1486 }
1487
1488 static inline void restore_ppu_querytype(struct spu_state *csa, struct spu *spu)
1489 {
1490         struct spu_problem __iomem *prob = spu->problem;
1491
1492         /* Restore, Step 52:
1493          *     Restore the PPU_QueryType register from CSA.
1494          */
1495         out_be32(&prob->dma_querytype_RW, csa->prob.dma_querytype_RW);
1496         eieio();
1497 }
1498
1499 static inline void restore_mfc_csr_tsq(struct spu_state *csa, struct spu *spu)
1500 {
1501         struct spu_priv2 __iomem *priv2 = spu->priv2;
1502
1503         /* Restore, Step 53:
1504          *     Restore the MFC_CSR_TSQ register from CSA.
1505          */
1506         out_be64(&priv2->spu_tag_status_query_RW,
1507                  csa->priv2.spu_tag_status_query_RW);
1508         eieio();
1509 }
1510
1511 static inline void restore_mfc_csr_cmd(struct spu_state *csa, struct spu *spu)
1512 {
1513         struct spu_priv2 __iomem *priv2 = spu->priv2;
1514
1515         /* Restore, Step 54:
1516          *     Restore the MFC_CSR_CMD1 and MFC_CSR_CMD2
1517          *     registers from CSA.
1518          */
1519         out_be64(&priv2->spu_cmd_buf1_RW, csa->priv2.spu_cmd_buf1_RW);
1520         out_be64(&priv2->spu_cmd_buf2_RW, csa->priv2.spu_cmd_buf2_RW);
1521         eieio();
1522 }
1523
1524 static inline void restore_mfc_csr_ato(struct spu_state *csa, struct spu *spu)
1525 {
1526         struct spu_priv2 __iomem *priv2 = spu->priv2;
1527
1528         /* Restore, Step 55:
1529          *     Restore the MFC_CSR_ATO register from CSA.
1530          */
1531         out_be64(&priv2->spu_atomic_status_RW, csa->priv2.spu_atomic_status_RW);
1532 }
1533
1534 static inline void restore_mfc_tclass_id(struct spu_state *csa, struct spu *spu)
1535 {
1536         /* Restore, Step 56:
1537          *     Restore the MFC_TCLASS_ID register from CSA.
1538          */
1539         spu_mfc_tclass_id_set(spu, csa->priv1.mfc_tclass_id_RW);
1540         eieio();
1541 }
1542
1543 static inline void set_llr_event(struct spu_state *csa, struct spu *spu)
1544 {
1545         u64 ch0_cnt, ch0_data;
1546         u64 ch1_data;
1547
1548         /* Restore, Step 57:
1549          *    Set the Lock Line Reservation Lost Event by:
1550          *      1. OR CSA.SPU_Event_Status with bit 21 (Lr) set to 1.
1551          *      2. If CSA.SPU_Channel_0_Count=0 and
1552          *         CSA.SPU_Wr_Event_Mask[Lr]=1 and
1553          *         CSA.SPU_Event_Status[Lr]=0 then set
1554          *         CSA.SPU_Event_Status_Count=1.
1555          */
1556         ch0_cnt = csa->spu_chnlcnt_RW[0];
1557         ch0_data = csa->spu_chnldata_RW[0];
1558         ch1_data = csa->spu_chnldata_RW[1];
1559         csa->spu_chnldata_RW[0] |= MFC_LLR_LOST_EVENT;
1560         if ((ch0_cnt == 0) && !(ch0_data & MFC_LLR_LOST_EVENT) &&
1561             (ch1_data & MFC_LLR_LOST_EVENT)) {
1562                 csa->spu_chnlcnt_RW[0] = 1;
1563         }
1564 }
1565
1566 static inline void restore_decr_wrapped(struct spu_state *csa, struct spu *spu)
1567 {
1568         /* Restore, Step 58:
1569          *     If the status of the CSA software decrementer
1570          *     "wrapped" flag is set, OR in a '1' to
1571          *     CSA.SPU_Event_Status[Tm].
1572          */
1573         if (csa->lscsa->decr_status.slot[0] == 1) {
1574                 csa->spu_chnldata_RW[0] |= 0x20;
1575         }
1576         if ((csa->lscsa->decr_status.slot[0] == 1) &&
1577             (csa->spu_chnlcnt_RW[0] == 0 &&
1578              ((csa->spu_chnldata_RW[2] & 0x20) == 0x0) &&
1579              ((csa->spu_chnldata_RW[0] & 0x20) != 0x1))) {
1580                 csa->spu_chnlcnt_RW[0] = 1;
1581         }
1582 }
1583
1584 static inline void restore_ch_part1(struct spu_state *csa, struct spu *spu)
1585 {
1586         struct spu_priv2 __iomem *priv2 = spu->priv2;
1587         u64 idx, ch_indices[7] = { 0UL, 3UL, 4UL, 24UL, 25UL, 27UL };
1588         int i;
1589
1590         /* Restore, Step 59:
1591          */
1592
1593         /* Restore CH 1 without count */
1594         out_be64(&priv2->spu_chnlcntptr_RW, 1);
1595         out_be64(&priv2->spu_chnldata_RW, csa->spu_chnldata_RW[1]);
1596
1597         /* Restore the following CH: [0,3,4,24,25,27] */
1598         for (i = 0; i < 7; i++) {
1599                 idx = ch_indices[i];
1600                 out_be64(&priv2->spu_chnlcntptr_RW, idx);
1601                 eieio();
1602                 out_be64(&priv2->spu_chnldata_RW, csa->spu_chnldata_RW[idx]);
1603                 out_be64(&priv2->spu_chnlcnt_RW, csa->spu_chnlcnt_RW[idx]);
1604                 eieio();
1605         }
1606 }
1607
1608 static inline void restore_ch_part2(struct spu_state *csa, struct spu *spu)
1609 {
1610         struct spu_priv2 __iomem *priv2 = spu->priv2;
1611         u64 ch_indices[3] = { 9UL, 21UL, 23UL };
1612         u64 ch_counts[3] = { 1UL, 16UL, 1UL };
1613         u64 idx;
1614         int i;
1615
1616         /* Restore, Step 60:
1617          *     Restore the following CH: [9,21,23].
1618          */
1619         ch_counts[0] = 1UL;
1620         ch_counts[1] = csa->spu_chnlcnt_RW[21];
1621         ch_counts[2] = 1UL;
1622         for (i = 0; i < 3; i++) {
1623                 idx = ch_indices[i];
1624                 out_be64(&priv2->spu_chnlcntptr_RW, idx);
1625                 eieio();
1626                 out_be64(&priv2->spu_chnlcnt_RW, ch_counts[i]);
1627                 eieio();
1628         }
1629 }
1630
1631 static inline void restore_spu_lslr(struct spu_state *csa, struct spu *spu)
1632 {
1633         struct spu_priv2 __iomem *priv2 = spu->priv2;
1634
1635         /* Restore, Step 61:
1636          *     Restore the SPU_LSLR register from CSA.
1637          */
1638         out_be64(&priv2->spu_lslr_RW, csa->priv2.spu_lslr_RW);
1639         eieio();
1640 }
1641
1642 static inline void restore_spu_cfg(struct spu_state *csa, struct spu *spu)
1643 {
1644         struct spu_priv2 __iomem *priv2 = spu->priv2;
1645
1646         /* Restore, Step 62:
1647          *     Restore the SPU_Cfg register from CSA.
1648          */
1649         out_be64(&priv2->spu_cfg_RW, csa->priv2.spu_cfg_RW);
1650         eieio();
1651 }
1652
1653 static inline void restore_pm_trace(struct spu_state *csa, struct spu *spu)
1654 {
1655         /* Restore, Step 63:
1656          *     Restore PM_Trace_Tag_Wait_Mask from CSA.
1657          *     Not performed by this implementation.
1658          */
1659 }
1660
1661 static inline void restore_spu_npc(struct spu_state *csa, struct spu *spu)
1662 {
1663         struct spu_problem __iomem *prob = spu->problem;
1664
1665         /* Restore, Step 64:
1666          *     Restore SPU_NPC from CSA.
1667          */
1668         out_be32(&prob->spu_npc_RW, csa->prob.spu_npc_RW);
1669         eieio();
1670 }
1671
1672 static inline void restore_spu_mb(struct spu_state *csa, struct spu *spu)
1673 {
1674         struct spu_priv2 __iomem *priv2 = spu->priv2;
1675         int i;
1676
1677         /* Restore, Step 65:
1678          *     Restore MFC_RdSPU_MB from CSA.
1679          */
1680         out_be64(&priv2->spu_chnlcntptr_RW, 29UL);
1681         eieio();
1682         out_be64(&priv2->spu_chnlcnt_RW, csa->spu_chnlcnt_RW[29]);
1683         for (i = 0; i < 4; i++) {
1684                 out_be64(&priv2->spu_chnldata_RW, csa->spu_mailbox_data[i]);
1685         }
1686         eieio();
1687 }
1688
1689 static inline void check_ppu_mb_stat(struct spu_state *csa, struct spu *spu)
1690 {
1691         struct spu_problem __iomem *prob = spu->problem;
1692         u32 dummy = 0;
1693
1694         /* Restore, Step 66:
1695          *     If CSA.MB_Stat[P]=0 (mailbox empty) then
1696          *     read from the PPU_MB register.
1697          */
1698         if ((csa->prob.mb_stat_R & 0xFF) == 0) {
1699                 dummy = in_be32(&prob->pu_mb_R);
1700                 eieio();
1701         }
1702 }
1703
1704 static inline void check_ppuint_mb_stat(struct spu_state *csa, struct spu *spu)
1705 {
1706         struct spu_priv2 __iomem *priv2 = spu->priv2;
1707         u64 dummy = 0UL;
1708
1709         /* Restore, Step 66:
1710          *     If CSA.MB_Stat[I]=0 (mailbox empty) then
1711          *     read from the PPUINT_MB register.
1712          */
1713         if ((csa->prob.mb_stat_R & 0xFF0000) == 0) {
1714                 dummy = in_be64(&priv2->puint_mb_R);
1715                 eieio();
1716                 spu_int_stat_clear(spu, 2, CLASS2_ENABLE_MAILBOX_INTR);
1717                 eieio();
1718         }
1719 }
1720
1721 static inline void restore_mfc_slbs(struct spu_state *csa, struct spu *spu)
1722 {
1723         struct spu_priv2 __iomem *priv2 = spu->priv2;
1724         int i;
1725
1726         /* Restore, Step 68:
1727          *     If MFC_SR1[R]='1', restore SLBs from CSA.
1728          */
1729         if (csa->priv1.mfc_sr1_RW & MFC_STATE1_RELOCATE_MASK) {
1730                 for (i = 0; i < 8; i++) {
1731                         out_be64(&priv2->slb_index_W, i);
1732                         eieio();
1733                         out_be64(&priv2->slb_esid_RW, csa->slb_esid_RW[i]);
1734                         out_be64(&priv2->slb_vsid_RW, csa->slb_vsid_RW[i]);
1735                         eieio();
1736                 }
1737                 out_be64(&priv2->slb_index_W, csa->priv2.slb_index_W);
1738                 eieio();
1739         }
1740 }
1741
1742 static inline void restore_mfc_sr1(struct spu_state *csa, struct spu *spu)
1743 {
1744         /* Restore, Step 69:
1745          *     Restore the MFC_SR1 register from CSA.
1746          */
1747         spu_mfc_sr1_set(spu, csa->priv1.mfc_sr1_RW);
1748         eieio();
1749 }
1750
1751 static inline void restore_other_spu_access(struct spu_state *csa,
1752                                             struct spu *spu)
1753 {
1754         /* Restore, Step 70:
1755          *     Restore other SPU mappings to this SPU. TBD.
1756          */
1757 }
1758
1759 static inline void restore_spu_runcntl(struct spu_state *csa, struct spu *spu)
1760 {
1761         struct spu_problem __iomem *prob = spu->problem;
1762
1763         /* Restore, Step 71:
1764          *     If CSA.SPU_Status[R]=1 then write
1765          *     SPU_RunCntl[R0R1]='01'.
1766          */
1767         if (csa->prob.spu_status_R & SPU_STATUS_RUNNING) {
1768                 out_be32(&prob->spu_runcntl_RW, SPU_RUNCNTL_RUNNABLE);
1769                 eieio();
1770         }
1771 }
1772
1773 static inline void restore_mfc_cntl(struct spu_state *csa, struct spu *spu)
1774 {
1775         struct spu_priv2 __iomem *priv2 = spu->priv2;
1776
1777         /* Restore, Step 72:
1778          *    Restore the MFC_CNTL register for the CSA.
1779          */
1780         out_be64(&priv2->mfc_control_RW, csa->priv2.mfc_control_RW);
1781         eieio();
1782         /*
1783          * FIXME: this is to restart a DMA that we were processing
1784          *        before the save. better remember the fault information
1785          *        in the csa instead.
1786          */
1787         if ((csa->priv2.mfc_control_RW & MFC_CNTL_SUSPEND_DMA_QUEUE_MASK)) {
1788                 out_be64(&priv2->mfc_control_RW, MFC_CNTL_RESTART_DMA_COMMAND);
1789                 eieio();
1790         }
1791 }
1792
1793 static inline void enable_user_access(struct spu_state *csa, struct spu *spu)
1794 {
1795         /* Restore, Step 73:
1796          *     Enable user-space access (if provided) to this
1797          *     SPU by mapping the virtual pages assigned to
1798          *     the SPU memory-mapped I/O (MMIO) for problem
1799          *     state. TBD.
1800          */
1801 }
1802
1803 static inline void reset_switch_active(struct spu_state *csa, struct spu *spu)
1804 {
1805         /* Restore, Step 74:
1806          *     Reset the "context switch active" flag.
1807          */
1808         clear_bit(SPU_CONTEXT_SWITCH_ACTIVE, &spu->flags);
1809         mb();
1810 }
1811
1812 static inline void reenable_interrupts(struct spu_state *csa, struct spu *spu)
1813 {
1814         /* Restore, Step 75:
1815          *     Re-enable SPU interrupts.
1816          */
1817         spin_lock_irq(&spu->register_lock);
1818         spu_int_mask_set(spu, 0, csa->priv1.int_mask_class0_RW);
1819         spu_int_mask_set(spu, 1, csa->priv1.int_mask_class1_RW);
1820         spu_int_mask_set(spu, 2, csa->priv1.int_mask_class2_RW);
1821         spin_unlock_irq(&spu->register_lock);
1822 }
1823
1824 static int quiece_spu(struct spu_state *prev, struct spu *spu)
1825 {
1826         /*
1827          * Combined steps 2-18 of SPU context save sequence, which
1828          * quiesce the SPU state (disable SPU execution, MFC command
1829          * queues, decrementer, SPU interrupts, etc.).
1830          *
1831          * Returns      0 on success.
1832          *              2 if failed step 2.
1833          *              6 if failed step 6.
1834          */
1835
1836         if (check_spu_isolate(prev, spu)) {     /* Step 2. */
1837                 return 2;
1838         }
1839         disable_interrupts(prev, spu);          /* Step 3. */
1840         set_watchdog_timer(prev, spu);          /* Step 4. */
1841         inhibit_user_access(prev, spu);         /* Step 5. */
1842         if (check_spu_isolate(prev, spu)) {     /* Step 6. */
1843                 return 6;
1844         }
1845         set_switch_pending(prev, spu);          /* Step 7. */
1846         save_mfc_cntl(prev, spu);               /* Step 8. */
1847         save_spu_runcntl(prev, spu);            /* Step 9. */
1848         save_mfc_sr1(prev, spu);                /* Step 10. */
1849         save_spu_status(prev, spu);             /* Step 11. */
1850         save_mfc_decr(prev, spu);               /* Step 12. */
1851         halt_mfc_decr(prev, spu);               /* Step 13. */
1852         save_timebase(prev, spu);               /* Step 14. */
1853         remove_other_spu_access(prev, spu);     /* Step 15. */
1854         do_mfc_mssync(prev, spu);               /* Step 16. */
1855         issue_mfc_tlbie(prev, spu);             /* Step 17. */
1856         handle_pending_interrupts(prev, spu);   /* Step 18. */
1857
1858         return 0;
1859 }
1860
1861 static void save_csa(struct spu_state *prev, struct spu *spu)
1862 {
1863         /*
1864          * Combine steps 19-44 of SPU context save sequence, which
1865          * save regions of the privileged & problem state areas.
1866          */
1867
1868         save_mfc_queues(prev, spu);     /* Step 19. */
1869         save_ppu_querymask(prev, spu);  /* Step 20. */
1870         save_ppu_querytype(prev, spu);  /* Step 21. */
1871         save_mfc_csr_tsq(prev, spu);    /* Step 22. */
1872         save_mfc_csr_cmd(prev, spu);    /* Step 23. */
1873         save_mfc_csr_ato(prev, spu);    /* Step 24. */
1874         save_mfc_tclass_id(prev, spu);  /* Step 25. */
1875         set_mfc_tclass_id(prev, spu);   /* Step 26. */
1876         purge_mfc_queue(prev, spu);     /* Step 27. */
1877         wait_purge_complete(prev, spu); /* Step 28. */
1878         save_mfc_slbs(prev, spu);       /* Step 29. */
1879         setup_mfc_sr1(prev, spu);       /* Step 30. */
1880         save_spu_npc(prev, spu);        /* Step 31. */
1881         save_spu_privcntl(prev, spu);   /* Step 32. */
1882         reset_spu_privcntl(prev, spu);  /* Step 33. */
1883         save_spu_lslr(prev, spu);       /* Step 34. */
1884         reset_spu_lslr(prev, spu);      /* Step 35. */
1885         save_spu_cfg(prev, spu);        /* Step 36. */
1886         save_pm_trace(prev, spu);       /* Step 37. */
1887         save_mfc_rag(prev, spu);        /* Step 38. */
1888         save_ppu_mb_stat(prev, spu);    /* Step 39. */
1889         save_ppu_mb(prev, spu);         /* Step 40. */
1890         save_ppuint_mb(prev, spu);      /* Step 41. */
1891         save_ch_part1(prev, spu);       /* Step 42. */
1892         save_spu_mb(prev, spu);         /* Step 43. */
1893         save_mfc_cmd(prev, spu);        /* Step 44. */
1894         reset_ch(prev, spu);            /* Step 45. */
1895 }
1896
1897 static void save_lscsa(struct spu_state *prev, struct spu *spu)
1898 {
1899         /*
1900          * Perform steps 46-57 of SPU context save sequence,
1901          * which save regions of the local store and register
1902          * file.
1903          */
1904
1905         resume_mfc_queue(prev, spu);    /* Step 46. */
1906         setup_mfc_slbs(prev, spu);      /* Step 47. */
1907         set_switch_active(prev, spu);   /* Step 48. */
1908         enable_interrupts(prev, spu);   /* Step 49. */
1909         save_ls_16kb(prev, spu);        /* Step 50. */
1910         set_spu_npc(prev, spu);         /* Step 51. */
1911         set_signot1(prev, spu);         /* Step 52. */
1912         set_signot2(prev, spu);         /* Step 53. */
1913         send_save_code(prev, spu);      /* Step 54. */
1914         set_ppu_querymask(prev, spu);   /* Step 55. */
1915         wait_tag_complete(prev, spu);   /* Step 56. */
1916         wait_spu_stopped(prev, spu);    /* Step 57. */
1917 }
1918
1919 static void harvest(struct spu_state *prev, struct spu *spu)
1920 {
1921         /*
1922          * Perform steps 2-25 of SPU context restore sequence,
1923          * which resets an SPU either after a failed save, or
1924          * when using SPU for first time.
1925          */
1926
1927         disable_interrupts(prev, spu);          /* Step 2.  */
1928         inhibit_user_access(prev, spu);         /* Step 3.  */
1929         terminate_spu_app(prev, spu);           /* Step 4.  */
1930         set_switch_pending(prev, spu);          /* Step 5.  */
1931         remove_other_spu_access(prev, spu);     /* Step 6.  */
1932         suspend_mfc(prev, spu);                 /* Step 7.  */
1933         wait_suspend_mfc_complete(prev, spu);   /* Step 8.  */
1934         if (!suspend_spe(prev, spu))            /* Step 9.  */
1935                 clear_spu_status(prev, spu);    /* Step 10. */
1936         do_mfc_mssync(prev, spu);               /* Step 11. */
1937         issue_mfc_tlbie(prev, spu);             /* Step 12. */
1938         handle_pending_interrupts(prev, spu);   /* Step 13. */
1939         purge_mfc_queue(prev, spu);             /* Step 14. */
1940         wait_purge_complete(prev, spu);         /* Step 15. */
1941         reset_spu_privcntl(prev, spu);          /* Step 16. */
1942         reset_spu_lslr(prev, spu);              /* Step 17. */
1943         setup_mfc_sr1(prev, spu);               /* Step 18. */
1944         invalidate_slbs(prev, spu);             /* Step 19. */
1945         reset_ch_part1(prev, spu);              /* Step 20. */
1946         reset_ch_part2(prev, spu);              /* Step 21. */
1947         enable_interrupts(prev, spu);           /* Step 22. */
1948         set_switch_active(prev, spu);           /* Step 23. */
1949         set_mfc_tclass_id(prev, spu);           /* Step 24. */
1950         resume_mfc_queue(prev, spu);            /* Step 25. */
1951 }
1952
1953 static void restore_lscsa(struct spu_state *next, struct spu *spu)
1954 {
1955         /*
1956          * Perform steps 26-40 of SPU context restore sequence,
1957          * which restores regions of the local store and register
1958          * file.
1959          */
1960
1961         set_watchdog_timer(next, spu);          /* Step 26. */
1962         setup_spu_status_part1(next, spu);      /* Step 27. */
1963         setup_spu_status_part2(next, spu);      /* Step 28. */
1964         restore_mfc_rag(next, spu);             /* Step 29. */
1965         setup_mfc_slbs(next, spu);              /* Step 30. */
1966         set_spu_npc(next, spu);                 /* Step 31. */
1967         set_signot1(next, spu);                 /* Step 32. */
1968         set_signot2(next, spu);                 /* Step 33. */
1969         setup_decr(next, spu);                  /* Step 34. */
1970         setup_ppu_mb(next, spu);                /* Step 35. */
1971         setup_ppuint_mb(next, spu);             /* Step 36. */
1972         send_restore_code(next, spu);           /* Step 37. */
1973         set_ppu_querymask(next, spu);           /* Step 38. */
1974         wait_tag_complete(next, spu);           /* Step 39. */
1975         wait_spu_stopped(next, spu);            /* Step 40. */
1976 }
1977
1978 static void restore_csa(struct spu_state *next, struct spu *spu)
1979 {
1980         /*
1981          * Combine steps 41-76 of SPU context restore sequence, which
1982          * restore regions of the privileged & problem state areas.
1983          */
1984
1985         restore_spu_privcntl(next, spu);        /* Step 41. */
1986         restore_status_part1(next, spu);        /* Step 42. */
1987         restore_status_part2(next, spu);        /* Step 43. */
1988         restore_ls_16kb(next, spu);             /* Step 44. */
1989         wait_tag_complete(next, spu);           /* Step 45. */
1990         suspend_mfc(next, spu);                 /* Step 46. */
1991         wait_suspend_mfc_complete(next, spu);   /* Step 47. */
1992         issue_mfc_tlbie(next, spu);             /* Step 48. */
1993         clear_interrupts(next, spu);            /* Step 49. */
1994         restore_mfc_queues(next, spu);          /* Step 50. */
1995         restore_ppu_querymask(next, spu);       /* Step 51. */
1996         restore_ppu_querytype(next, spu);       /* Step 52. */
1997         restore_mfc_csr_tsq(next, spu);         /* Step 53. */
1998         restore_mfc_csr_cmd(next, spu);         /* Step 54. */
1999         restore_mfc_csr_ato(next, spu);         /* Step 55. */
2000         restore_mfc_tclass_id(next, spu);       /* Step 56. */
2001         set_llr_event(next, spu);               /* Step 57. */
2002         restore_decr_wrapped(next, spu);        /* Step 58. */
2003         restore_ch_part1(next, spu);            /* Step 59. */
2004         restore_ch_part2(next, spu);            /* Step 60. */
2005         restore_spu_lslr(next, spu);            /* Step 61. */
2006         restore_spu_cfg(next, spu);             /* Step 62. */
2007         restore_pm_trace(next, spu);            /* Step 63. */
2008         restore_spu_npc(next, spu);             /* Step 64. */
2009         restore_spu_mb(next, spu);              /* Step 65. */
2010         check_ppu_mb_stat(next, spu);           /* Step 66. */
2011         check_ppuint_mb_stat(next, spu);        /* Step 67. */
2012         restore_mfc_slbs(next, spu);            /* Step 68. */
2013         restore_mfc_sr1(next, spu);             /* Step 69. */
2014         restore_other_spu_access(next, spu);    /* Step 70. */
2015         restore_spu_runcntl(next, spu);         /* Step 71. */
2016         restore_mfc_cntl(next, spu);            /* Step 72. */
2017         enable_user_access(next, spu);          /* Step 73. */
2018         reset_switch_active(next, spu);         /* Step 74. */
2019         reenable_interrupts(next, spu);         /* Step 75. */
2020 }
2021
2022 static int __do_spu_save(struct spu_state *prev, struct spu *spu)
2023 {
2024         int rc;
2025
2026         /*
2027          * SPU context save can be broken into three phases:
2028          *
2029          *     (a) quiesce [steps 2-16].
2030          *     (b) save of CSA, performed by PPE [steps 17-42]
2031          *     (c) save of LSCSA, mostly performed by SPU [steps 43-52].
2032          *
2033          * Returns      0 on success.
2034          *              2,6 if failed to quiece SPU
2035          *              53 if SPU-side of save failed.
2036          */
2037
2038         rc = quiece_spu(prev, spu);             /* Steps 2-16. */
2039         switch (rc) {
2040         default:
2041         case 2:
2042         case 6:
2043                 harvest(prev, spu);
2044                 return rc;
2045                 break;
2046         case 0:
2047                 break;
2048         }
2049         save_csa(prev, spu);                    /* Steps 17-43. */
2050         save_lscsa(prev, spu);                  /* Steps 44-53. */
2051         return check_save_status(prev, spu);    /* Step 54.     */
2052 }
2053
2054 static int __do_spu_restore(struct spu_state *next, struct spu *spu)
2055 {
2056         int rc;
2057
2058         /*
2059          * SPU context restore can be broken into three phases:
2060          *
2061          *    (a) harvest (or reset) SPU [steps 2-24].
2062          *    (b) restore LSCSA [steps 25-40], mostly performed by SPU.
2063          *    (c) restore CSA [steps 41-76], performed by PPE.
2064          *
2065          * The 'harvest' step is not performed here, but rather
2066          * as needed below.
2067          */
2068
2069         restore_lscsa(next, spu);               /* Steps 24-39. */
2070         rc = check_restore_status(next, spu);   /* Step 40.     */
2071         switch (rc) {
2072         default:
2073                 /* Failed. Return now. */
2074                 return rc;
2075                 break;
2076         case 0:
2077                 /* Fall through to next step. */
2078                 break;
2079         }
2080         restore_csa(next, spu);
2081
2082         return 0;
2083 }
2084
2085 /**
2086  * spu_save - SPU context save, with locking.
2087  * @prev: pointer to SPU context save area, to be saved.
2088  * @spu: pointer to SPU iomem structure.
2089  *
2090  * Acquire locks, perform the save operation then return.
2091  */
2092 int spu_save(struct spu_state *prev, struct spu *spu)
2093 {
2094         int rc;
2095
2096         acquire_spu_lock(spu);          /* Step 1.     */
2097         rc = __do_spu_save(prev, spu);  /* Steps 2-53. */
2098         release_spu_lock(spu);
2099         if (rc) {
2100                 panic("%s failed on SPU[%d], rc=%d.\n",
2101                       __func__, spu->number, rc);
2102         }
2103         return rc;
2104 }
2105 EXPORT_SYMBOL_GPL(spu_save);
2106
2107 /**
2108  * spu_restore - SPU context restore, with harvest and locking.
2109  * @new: pointer to SPU context save area, to be restored.
2110  * @spu: pointer to SPU iomem structure.
2111  *
2112  * Perform harvest + restore, as we may not be coming
2113  * from a previous successful save operation, and the
2114  * hardware state is unknown.
2115  */
2116 int spu_restore(struct spu_state *new, struct spu *spu)
2117 {
2118         int rc;
2119
2120         acquire_spu_lock(spu);
2121         harvest(NULL, spu);
2122         spu->dar = 0;
2123         spu->dsisr = 0;
2124         spu->slb_replace = 0;
2125         spu->class_0_pending = 0;
2126         rc = __do_spu_restore(new, spu);
2127         release_spu_lock(spu);
2128         if (rc) {
2129                 panic("%s failed on SPU[%d] rc=%d.\n",
2130                        __func__, spu->number, rc);
2131         }
2132         return rc;
2133 }
2134 EXPORT_SYMBOL_GPL(spu_restore);
2135
2136 /**
2137  * spu_harvest - SPU harvest (reset) operation
2138  * @spu: pointer to SPU iomem structure.
2139  *
2140  * Perform SPU harvest (reset) operation.
2141  */
2142 void spu_harvest(struct spu *spu)
2143 {
2144         acquire_spu_lock(spu);
2145         harvest(NULL, spu);
2146         release_spu_lock(spu);
2147 }
2148
2149 static void init_prob(struct spu_state *csa)
2150 {
2151         csa->spu_chnlcnt_RW[9] = 1;
2152         csa->spu_chnlcnt_RW[21] = 16;
2153         csa->spu_chnlcnt_RW[23] = 1;
2154         csa->spu_chnlcnt_RW[28] = 1;
2155         csa->spu_chnlcnt_RW[30] = 1;
2156         csa->prob.spu_runcntl_RW = SPU_RUNCNTL_STOP;
2157         csa->prob.mb_stat_R = 0x000400;
2158 }
2159
2160 static void init_priv1(struct spu_state *csa)
2161 {
2162         /* Enable decode, relocate, tlbie response, master runcntl. */
2163         csa->priv1.mfc_sr1_RW = MFC_STATE1_LOCAL_STORAGE_DECODE_MASK |
2164             MFC_STATE1_MASTER_RUN_CONTROL_MASK |
2165             MFC_STATE1_PROBLEM_STATE_MASK |
2166             MFC_STATE1_RELOCATE_MASK | MFC_STATE1_BUS_TLBIE_MASK;
2167
2168         /* Set storage description.  */
2169         csa->priv1.mfc_sdr_RW = mfspr(SPRN_SDR1);
2170
2171         /* Enable OS-specific set of interrupts. */
2172         csa->priv1.int_mask_class0_RW = CLASS0_ENABLE_DMA_ALIGNMENT_INTR |
2173             CLASS0_ENABLE_INVALID_DMA_COMMAND_INTR |
2174             CLASS0_ENABLE_SPU_ERROR_INTR;
2175         csa->priv1.int_mask_class1_RW = CLASS1_ENABLE_SEGMENT_FAULT_INTR |
2176             CLASS1_ENABLE_STORAGE_FAULT_INTR;
2177         csa->priv1.int_mask_class2_RW = CLASS2_ENABLE_SPU_STOP_INTR |
2178             CLASS2_ENABLE_SPU_HALT_INTR |
2179             CLASS2_ENABLE_SPU_DMA_TAG_GROUP_COMPLETE_INTR;
2180 }
2181
2182 static void init_priv2(struct spu_state *csa)
2183 {
2184         csa->priv2.spu_lslr_RW = LS_ADDR_MASK;
2185         csa->priv2.mfc_control_RW = MFC_CNTL_RESUME_DMA_QUEUE |
2186             MFC_CNTL_NORMAL_DMA_QUEUE_OPERATION |
2187             MFC_CNTL_DMA_QUEUES_EMPTY_MASK;
2188 }
2189
2190 /**
2191  * spu_alloc_csa - allocate and initialize an SPU context save area.
2192  *
2193  * Allocate and initialize the contents of an SPU context save area.
2194  * This includes enabling address translation, interrupt masks, etc.,
2195  * as appropriate for the given OS environment.
2196  *
2197  * Note that storage for the 'lscsa' is allocated separately,
2198  * as it is by far the largest of the context save regions,
2199  * and may need to be pinned or otherwise specially aligned.
2200  */
2201 void spu_init_csa(struct spu_state *csa)
2202 {
2203         struct spu_lscsa *lscsa;
2204         unsigned char *p;
2205
2206         if (!csa)
2207                 return;
2208         memset(csa, 0, sizeof(struct spu_state));
2209
2210         lscsa = vmalloc(sizeof(struct spu_lscsa));
2211         if (!lscsa)
2212                 return;
2213
2214         memset(lscsa, 0, sizeof(struct spu_lscsa));
2215         csa->lscsa = lscsa;
2216         spin_lock_init(&csa->register_lock);
2217
2218         /* Set LS pages reserved to allow for user-space mapping. */
2219         for (p = lscsa->ls; p < lscsa->ls + LS_SIZE; p += PAGE_SIZE)
2220                 SetPageReserved(vmalloc_to_page(p));
2221
2222         init_prob(csa);
2223         init_priv1(csa);
2224         init_priv2(csa);
2225 }
2226 EXPORT_SYMBOL_GPL(spu_init_csa);
2227
2228 void spu_fini_csa(struct spu_state *csa)
2229 {
2230         /* Clear reserved bit before vfree. */
2231         unsigned char *p;
2232         for (p = csa->lscsa->ls; p < csa->lscsa->ls + LS_SIZE; p += PAGE_SIZE)
2233                 ClearPageReserved(vmalloc_to_page(p));
2234
2235         vfree(csa->lscsa);
2236 }
2237 EXPORT_SYMBOL_GPL(spu_fini_csa);