arch/powerpc/platforms/85xx/xes_mpc85xx.c

   1 /*
   2  * Copyright (C) 2009 Extreme Engineering Solutions, Inc.
   3  *
   4  * X-ES board-specific functionality
   5  *
   6  * Based on mpc85xx_ds code from Freescale Semiconductor, Inc.
   7  *
   8  * Author: Nate Case <ncase@xes-inc.com>
   9  *
  10  * This is free software; you can redistribute it and/or modify
  11  * it under the terms of the GNU General Public License version 2 as
  12  * published by the Free Software Foundation.
  13  */
  14
  15 #include <linux/stddef.h>
  16 #include <linux/kernel.h>
  17 #include <linux/pci.h>
  18 #include <linux/kdev_t.h>
  19 #include <linux/delay.h>
  20 #include <linux/seq_file.h>
  21 #include <linux/interrupt.h>
  22 #include <linux/of_platform.h>
  23
  24 #include <asm/system.h>
  25 #include <asm/time.h>
  26 #include <asm/machdep.h>
  27 #include <asm/pci-bridge.h>
  28 #include <mm/mmu_decl.h>
  29 #include <asm/prom.h>
  30 #include <asm/udbg.h>
  31 #include <asm/mpic.h>
  32
  33 #include <sysdev/fsl_soc.h>
  34 #include <sysdev/fsl_pci.h>
  35
  36 /* A few bit definitions needed for fixups on some boards */
  37 #define MPC85xx_L2CTL_L2E               0x80000000 /* L2 enable */
  38 #define MPC85xx_L2CTL_L2I               0x40000000 /* L2 flash invalidate */
  39 #define MPC85xx_L2CTL_L2SIZ_MASK        0x30000000 /* L2 SRAM size (R/O) */
  40
  41 void __init xes_mpc85xx_pic_init(void)
  42 {
  43         struct mpic *mpic;
  44         struct resource r;
  45         struct device_node *np;
  46
  47         np = of_find_node_by_type(NULL, "open-pic");
  48         if (np == NULL) {
  49                 printk(KERN_ERR "Could not find open-pic node\n");
  50                 return;
  51         }
  52
  53         if (of_address_to_resource(np, 0, &r)) {
  54                 printk(KERN_ERR "Failed to map mpic register space\n");
  55                 of_node_put(np);
  56                 return;
  57         }
  58
  59         mpic = mpic_alloc(np, r.start,
  60                           MPIC_PRIMARY | MPIC_WANTS_RESET |
  61                           MPIC_BIG_ENDIAN | MPIC_BROKEN_FRR_NIRQS,
  62                         0, 256, " OpenPIC  ");
  63         BUG_ON(mpic == NULL);
  64         of_node_put(np);
  65
  66         mpic_init(mpic);
  67 }
  68
  69 static void xes_mpc85xx_configure_l2(void __iomem *l2_base)
  70 {
  71         volatile uint32_t ctl, tmp;
  72
  73         asm volatile("msync; isync");
  74         tmp = in_be32(l2_base);
  75
  76         /*
  77          * xMon may have enabled part of L2 as SRAM, so we need to set it
  78          * up for all cache mode just to be safe.
  79          */
  80         printk(KERN_INFO "xes_mpc85xx: Enabling L2 as cache\n");
  81
  82         ctl = MPC85xx_L2CTL_L2E | MPC85xx_L2CTL_L2I;
  83         if (of_machine_is_compatible("MPC8540") ||
  84             of_machine_is_compatible("MPC8560"))
  85                 /*
  86                  * Assume L2 SRAM is used fully for cache, so set
  87                  * L2BLKSZ (bits 4:5) to match L2SIZ (bits 2:3).
  88                  */
  89                 ctl |= (tmp & MPC85xx_L2CTL_L2SIZ_MASK) >> 2;
  90
  91         asm volatile("msync; isync");
  92         out_be32(l2_base, ctl);
  93         asm volatile("msync; isync");
  94 }
  95
  96 static void xes_mpc85xx_fixups(void)
  97 {
  98         struct device_node *np;
  99         int err;
 100
 101         /*
 102          * Legacy xMon firmware on some X-ES boards does not enable L2
 103          * as cache.  We must ensure that they get enabled here.
 104          */
 105         for_each_node_by_name(np, "l2-cache-controller") {
 106                 struct resource r[2];
 107                 void __iomem *l2_base;
 108
 109                 /* Only MPC8548, MPC8540, and MPC8560 boards are affected */
 110                 if (!of_device_is_compatible(np,
 111                                     "fsl,mpc8548-l2-cache-controller") &&
 112                     !of_device_is_compatible(np,
 113                                     "fsl,mpc8540-l2-cache-controller") &&
 114                     !of_device_is_compatible(np,
 115                                     "fsl,mpc8560-l2-cache-controller"))
 116                         continue;
 117
 118                 err = of_address_to_resource(np, 0, &r[0]);
 119                 if (err) {
 120                         printk(KERN_WARNING "xes_mpc85xx: Could not get "
 121                                "resource for device tree node '%s'",
 122                                np->full_name);
 123                         continue;
 124                 }
 125
 126                 l2_base = ioremap(r[0].start, r[0].end - r[0].start + 1);
 127
 128                 xes_mpc85xx_configure_l2(l2_base);
 129         }
 130 }
 131
 132 #ifdef CONFIG_PCI
 133 static int primary_phb_addr;
 134 #endif
 135
 136 /*
 137  * Setup the architecture
 138  */
 139 #ifdef CONFIG_SMP
 140 extern void __init mpc85xx_smp_init(void);
 141 #endif
 142 static void __init xes_mpc85xx_setup_arch(void)
 143 {
 144 #ifdef CONFIG_PCI
 145         struct device_node *np;
 146 #endif
 147         struct device_node *root;
 148         const char *model = "Unknown";
 149
 150         root = of_find_node_by_path("/");
 151         if (root == NULL)
 152                 return;
 153
 154         model = of_get_property(root, "model", NULL);
 155
 156         printk(KERN_INFO "X-ES MPC85xx-based single-board computer: %s\n",
 157                model + strlen("xes,"));
 158
 159         xes_mpc85xx_fixups();
 160
 161 #ifdef CONFIG_PCI
 162         for_each_node_by_type(np, "pci") {
 163                 if (of_device_is_compatible(np, "fsl,mpc8540-pci") ||
 164                     of_device_is_compatible(np, "fsl,mpc8548-pcie")) {
 165                         struct resource rsrc;
 166                         of_address_to_resource(np, 0, &rsrc);
 167                         if ((rsrc.start & 0xfffff) == primary_phb_addr)
 168                                 fsl_add_bridge(np, 1);
 169                         else
 170                                 fsl_add_bridge(np, 0);
 171                 }
 172         }
 173 #endif
 174
 175 #ifdef CONFIG_SMP
 176         mpc85xx_smp_init();
 177 #endif
 178 }
 179
 180 static struct of_device_id __initdata xes_mpc85xx_ids[] = {
 181         { .type = "soc", },
 182         { .compatible = "soc", },
 183         { .compatible = "simple-bus", },
 184         { .compatible = "gianfar", },
 185         {},
 186 };
 187
 188 static int __init xes_mpc85xx_publish_devices(void)
 189 {
 190         return of_platform_bus_probe(NULL, xes_mpc85xx_ids, NULL);
 191 }
 192 machine_device_initcall(xes_mpc8572, xes_mpc85xx_publish_devices);
 193 machine_device_initcall(xes_mpc8548, xes_mpc85xx_publish_devices);
 194 machine_device_initcall(xes_mpc8540, xes_mpc85xx_publish_devices);
 195
 196 /*
 197  * Called very early, device-tree isn't unflattened
 198  */
 199 static int __init xes_mpc8572_probe(void)
 200 {
 201         unsigned long root = of_get_flat_dt_root();
 202
 203         if (of_flat_dt_is_compatible(root, "xes,MPC8572")) {
 204 #ifdef CONFIG_PCI
 205                 primary_phb_addr = 0x8000;
 206 #endif
 207                 return 1;
 208         } else {
 209                 return 0;
 210         }
 211 }
 212
 213 static int __init xes_mpc8548_probe(void)
 214 {
 215         unsigned long root = of_get_flat_dt_root();
 216
 217         if (of_flat_dt_is_compatible(root, "xes,MPC8548")) {
 218 #ifdef CONFIG_PCI
 219                 primary_phb_addr = 0xb000;
 220 #endif
 221                 return 1;
 222         } else {
 223                 return 0;
 224         }
 225 }
 226
 227 static int __init xes_mpc8540_probe(void)
 228 {
 229         unsigned long root = of_get_flat_dt_root();
 230
 231         if (of_flat_dt_is_compatible(root, "xes,MPC8540")) {
 232 #ifdef CONFIG_PCI
 233                 primary_phb_addr = 0xb000;
 234 #endif
 235                 return 1;
 236         } else {
 237                 return 0;
 238         }
 239 }
 240
 241 define_machine(xes_mpc8572) {
 242         .name                   = "X-ES MPC8572",
 243         .probe                  = xes_mpc8572_probe,
 244         .setup_arch             = xes_mpc85xx_setup_arch,
 245         .init_IRQ               = xes_mpc85xx_pic_init,
 246 #ifdef CONFIG_PCI
 247         .pcibios_fixup_bus      = fsl_pcibios_fixup_bus,
 248 #endif
 249         .get_irq                = mpic_get_irq,
 250         .restart                = fsl_rstcr_restart,
 251         .calibrate_decr         = generic_calibrate_decr,
 252         .progress               = udbg_progress,
 253 };
 254
 255 define_machine(xes_mpc8548) {
 256         .name                   = "X-ES MPC8548",
 257         .probe                  = xes_mpc8548_probe,
 258         .setup_arch             = xes_mpc85xx_setup_arch,
 259         .init_IRQ               = xes_mpc85xx_pic_init,
 260 #ifdef CONFIG_PCI
 261         .pcibios_fixup_bus      = fsl_pcibios_fixup_bus,
 262 #endif
 263         .get_irq                = mpic_get_irq,
 264         .restart                = fsl_rstcr_restart,
 265         .calibrate_decr         = generic_calibrate_decr,
 266         .progress               = udbg_progress,
 267 };
 268
 269 define_machine(xes_mpc8540) {
 270         .name                   = "X-ES MPC8540",
 271         .probe                  = xes_mpc8540_probe,
 272         .setup_arch             = xes_mpc85xx_setup_arch,
 273         .init_IRQ               = xes_mpc85xx_pic_init,
 274 #ifdef CONFIG_PCI
 275         .pcibios_fixup_bus      = fsl_pcibios_fixup_bus,
 276 #endif
 277         .get_irq                = mpic_get_irq,
 278         .restart                = fsl_rstcr_restart,
 279         .calibrate_decr         = generic_calibrate_decr,
 280         .progress               = udbg_progress,
 281 };