arch/powerpc/boot/dts/mpc8569mds.dts

   1 /*
   2  * MPC8569E MDS Device Tree Source
   3  *
   4  * Copyright (C) 2009 Freescale Semiconductor Inc.
   5  *
   6  * This program is free software; you can redistribute  it and/or modify it
   7  * under  the terms of  the GNU General  Public License as published by the
   8  * Free Software Foundation;  either version 2 of the  License, or (at your
   9  * option) any later version.
  10  */
  11
  12 /dts-v1/;
  13
  14 / {
  15         model = "MPC8569EMDS";
  16         compatible = "fsl,MPC8569EMDS";
  17         #address-cells = <1>;
  18         #size-cells = <1>;
  19
  20         aliases {
  21                 serial0 = &serial0;
  22                 serial1 = &serial1;
  23                 ethernet0 = &enet0;
  24                 ethernet1 = &enet1;
  25                 ethernet2 = &enet2;
  26                 ethernet3 = &enet3;
  27                 ethernet5 = &enet5;
  28                 ethernet7 = &enet7;
  29                 pci1 = &pci1;
  30                 rapidio0 = &rio0;
  31         };
  32
  33         cpus {
  34                 #address-cells = <1>;
  35                 #size-cells = <0>;
  36
  37                 PowerPC,8569@0 {
  38                         device_type = "cpu";
  39                         reg = <0x0>;
  40                         d-cache-line-size = <32>;       // 32 bytes
  41                         i-cache-line-size = <32>;       // 32 bytes
  42                         d-cache-size = <0x8000>;                // L1, 32K
  43                         i-cache-size = <0x8000>;                // L1, 32K
  44                         timebase-frequency = <0>;
  45                         bus-frequency = <0>;
  46                         clock-frequency = <0>;
  47                         next-level-cache = <&L2>;
  48                 };
  49         };
  50
  51         memory {
  52                 device_type = "memory";
  53         };
  54
  55         localbus@e0005000 {
  56                 #address-cells = <2>;
  57                 #size-cells = <1>;
  58                 compatible = "fsl,mpc8569-elbc", "fsl,elbc", "simple-bus";
  59                 reg = <0xe0005000 0x1000>;
  60                 interrupts = <19 2>;
  61                 interrupt-parent = <&mpic>;
  62
  63                 ranges = <0x0 0x0 0xfe000000 0x02000000
  64                           0x1 0x0 0xf8000000 0x00008000
  65                           0x2 0x0 0xf0000000 0x04000000
  66                           0x3 0x0 0xfc000000 0x00008000
  67                           0x4 0x0 0xf8008000 0x00008000
  68                           0x5 0x0 0xf8010000 0x00008000>;
  69
  70                 nor@0,0 {
  71                         #address-cells = <1>;
  72                         #size-cells = <1>;
  73                         compatible = "cfi-flash";
  74                         reg = <0x0 0x0 0x02000000>;
  75                         bank-width = <1>;
  76                         device-width = <1>;
  77                         partition@0 {
  78                                 label = "ramdisk";
  79                                 reg = <0x00000000 0x01c00000>;
  80                         };
  81                         partition@1c00000 {
  82                                 label = "kernel";
  83                                 reg = <0x01c00000 0x002e0000>;
  84                         };
  85                         partiton@1ee0000 {
  86                                 label = "dtb";
  87                                 reg = <0x01ee0000 0x00020000>;
  88                         };
  89                         partition@1f00000 {
  90                                 label = "firmware";
  91                                 reg = <0x01f00000 0x00080000>;
  92                                 read-only;
  93                         };
  94                         partition@1f80000 {
  95                                 label = "u-boot";
  96                                 reg = <0x01f80000 0x00080000>;
  97                                 read-only;
  98                         };
  99                 };
 100
 101                 bcsr@1,0 {
 102                         compatible = "fsl,mpc8569mds-bcsr";
 103                         reg = <1 0 0x8000>;
 104                 };
 105
 106                 nand@3,0 {
 107                         compatible = "fsl,mpc8569-fcm-nand",
 108                                      "fsl,elbc-fcm-nand";
 109                         reg = <3 0 0x8000>;
 110                 };
 111
 112                 pib@4,0 {
 113                         compatible = "fsl,mpc8569mds-pib";
 114                         reg = <4 0 0x8000>;
 115                 };
 116
 117                 pib@5,0 {
 118                         compatible = "fsl,mpc8569mds-pib";
 119                         reg = <5 0 0x8000>;
 120                 };
 121         };
 122
 123         soc@e0000000 {
 124                 #address-cells = <1>;
 125                 #size-cells = <1>;
 126                 device_type = "soc";
 127                 compatible = "fsl,mpc8569-immr", "simple-bus";
 128                 ranges = <0x0 0xe0000000 0x100000>;
 129                 bus-frequency = <0>;
 130
 131                 ecm-law@0 {
 132                         compatible = "fsl,ecm-law";
 133                         reg = <0x0 0x1000>;
 134                         fsl,num-laws = <10>;
 135                 };
 136
 137                 ecm@1000 {
 138                         compatible = "fsl,mpc8569-ecm", "fsl,ecm";
 139                         reg = <0x1000 0x1000>;
 140                         interrupts = <17 2>;
 141                         interrupt-parent = <&mpic>;
 142                 };
 143
 144                 memory-controller@2000 {
 145                         compatible = "fsl,mpc8569-memory-controller";
 146                         reg = <0x2000 0x1000>;
 147                         interrupt-parent = <&mpic>;
 148                         interrupts = <18 2>;
 149                 };
 150
 151                 i2c@3000 {
 152                         #address-cells = <1>;
 153                         #size-cells = <0>;
 154                         cell-index = <0>;
 155                         compatible = "fsl-i2c";
 156                         reg = <0x3000 0x100>;
 157                         interrupts = <43 2>;
 158                         interrupt-parent = <&mpic>;
 159                         dfsrr;
 160
 161                         rtc@68 {
 162                                 compatible = "dallas,ds1374";
 163                                 reg = <0x68>;
 164                         };
 165                 };
 166
 167                 i2c@3100 {
 168                         #address-cells = <1>;
 169                         #size-cells = <0>;
 170                         cell-index = <1>;
 171                         compatible = "fsl-i2c";
 172                         reg = <0x3100 0x100>;
 173                         interrupts = <43 2>;
 174                         interrupt-parent = <&mpic>;
 175                         dfsrr;
 176                 };
 177
 178                 serial0: serial@4500 {
 179                         cell-index = <0>;
 180                         device_type = "serial";
 181                         compatible = "ns16550";
 182                         reg = <0x4500 0x100>;
 183                         clock-frequency = <0>;
 184                         interrupts = <42 2>;
 185                         interrupt-parent = <&mpic>;
 186                 };
 187
 188                 serial1: serial@4600 {
 189                         cell-index = <1>;
 190                         device_type = "serial";
 191                         compatible = "ns16550";
 192                         reg = <0x4600 0x100>;
 193                         clock-frequency = <0>;
 194                         interrupts = <42 2>;
 195                         interrupt-parent = <&mpic>;
 196                 };
 197
 198                 L2: l2-cache-controller@20000 {
 199                         compatible = "fsl,mpc8569-l2-cache-controller";
 200                         reg = <0x20000 0x1000>;
 201                         cache-line-size = <32>; // 32 bytes
 202                         cache-size = <0x80000>; // L2, 512K
 203                         interrupt-parent = <&mpic>;
 204                         interrupts = <16 2>;
 205                 };
 206
 207                 dma@21300 {
 208                         #address-cells = <1>;
 209                         #size-cells = <1>;
 210                         compatible = "fsl,mpc8569-dma", "fsl,eloplus-dma";
 211                         reg = <0x21300 0x4>;
 212                         ranges = <0x0 0x21100 0x200>;
 213                         cell-index = <0>;
 214                         dma-channel@0 {
 215                                 compatible = "fsl,mpc8569-dma-channel",
 216                                                 "fsl,eloplus-dma-channel";
 217                                 reg = <0x0 0x80>;
 218                                 cell-index = <0>;
 219                                 interrupt-parent = <&mpic>;
 220                                 interrupts = <20 2>;
 221                         };
 222                         dma-channel@80 {
 223                                 compatible = "fsl,mpc8569-dma-channel",
 224                                                 "fsl,eloplus-dma-channel";
 225                                 reg = <0x80 0x80>;
 226                                 cell-index = <1>;
 227                                 interrupt-parent = <&mpic>;
 228                                 interrupts = <21 2>;
 229                         };
 230                         dma-channel@100 {
 231                                 compatible = "fsl,mpc8569-dma-channel",
 232                                                 "fsl,eloplus-dma-channel";
 233                                 reg = <0x100 0x80>;
 234                                 cell-index = <2>;
 235                                 interrupt-parent = <&mpic>;
 236                                 interrupts = <22 2>;
 237                         };
 238                         dma-channel@180 {
 239                                 compatible = "fsl,mpc8569-dma-channel",
 240                                                 "fsl,eloplus-dma-channel";
 241                                 reg = <0x180 0x80>;
 242                                 cell-index = <3>;
 243                                 interrupt-parent = <&mpic>;
 244                                 interrupts = <23 2>;
 245                         };
 246                 };
 247
 248                 sdhci@2e000 {
 249                         compatible = "fsl,mpc8569-esdhc", "fsl,esdhc";
 250                         reg = <0x2e000 0x1000>;
 251                         interrupts = <72 0x8>;
 252                         interrupt-parent = <&mpic>;
 253                         /* Filled in by U-Boot */
 254                         clock-frequency = <0>;
 255                         status = "disabled";
 256                         sdhci,1-bit-only;
 257                 };
 258
 259                 crypto@30000 {
 260                         compatible = "fsl,sec3.1", "fsl,sec3.0", "fsl,sec2.4",
 261                                 "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0";
 262                         reg = <0x30000 0x10000>;
 263                         interrupts = <45 2 58 2>;
 264                         interrupt-parent = <&mpic>;
 265                         fsl,num-channels = <4>;
 266                         fsl,channel-fifo-len = <24>;
 267                         fsl,exec-units-mask = <0xbfe>;
 268                         fsl,descriptor-types-mask = <0x3ab0ebf>;
 269                 };
 270
 271                 mpic: pic@40000 {
 272                         interrupt-controller;
 273                         #address-cells = <0>;
 274                         #interrupt-cells = <2>;
 275                         reg = <0x40000 0x40000>;
 276                         compatible = "chrp,open-pic";
 277                         device_type = "open-pic";
 278                 };
 279
 280                 msi@41600 {
 281                         compatible = "fsl,mpc8568-msi", "fsl,mpic-msi";
 282                         reg = <0x41600 0x80>;
 283                         msi-available-ranges = <0 0x100>;
 284                         interrupts = <
 285                                 0xe0 0
 286                                 0xe1 0
 287                                 0xe2 0
 288                                 0xe3 0
 289                                 0xe4 0
 290                                 0xe5 0
 291                                 0xe6 0
 292                                 0xe7 0>;
 293                         interrupt-parent = <&mpic>;
 294                 };
 295
 296                 global-utilities@e0000 {
 297                         compatible = "fsl,mpc8569-guts";
 298                         reg = <0xe0000 0x1000>;
 299                         fsl,has-rstcr;
 300                 };
 301
 302                 par_io@e0100 {
 303                         #address-cells = <1>;
 304                         #size-cells = <1>;
 305                         reg = <0xe0100 0x100>;
 306                         ranges = <0x0 0xe0100 0x100>;
 307                         device_type = "par_io";
 308                         num-ports = <7>;
 309
 310                         qe_pio_e: gpio-controller@80 {
 311                                 #gpio-cells = <2>;
 312                                 compatible = "fsl,mpc8569-qe-pario-bank",
 313                                              "fsl,mpc8323-qe-pario-bank";
 314                                 reg = <0x80 0x18>;
 315                                 gpio-controller;
 316                         };
 317
 318                         pio1: ucc_pin@01 {
 319                                 pio-map = <
 320                         /* port  pin  dir  open_drain  assignment  has_irq */
 321                                         0x2  0x1f 0x1  0x0  0x1  0x0    /* QE_MUX_MDC */
 322                                         0x2  0x1e 0x3  0x0  0x2  0x0    /* QE_MUX_MDIO */
 323                                         0x2  0x0b 0x2  0x0  0x1  0x0    /* CLK12*/
 324                                         0x0  0x0  0x1  0x0  0x3  0x0    /* ENET1_TXD0_SER1_TXD0 */
 325                                         0x0  0x1  0x1  0x0  0x3  0x0    /* ENET1_TXD1_SER1_TXD1 */
 326                                         0x0  0x2  0x1  0x0  0x1  0x0    /* ENET1_TXD2_SER1_TXD2 */
 327                                         0x0  0x3  0x1  0x0  0x2  0x0    /* ENET1_TXD3_SER1_TXD3 */
 328                                         0x0  0x6  0x2  0x0  0x3  0x0    /* ENET1_RXD0_SER1_RXD0 */
 329                                         0x0  0x7  0x2  0x0  0x1  0x0    /* ENET1_RXD1_SER1_RXD1 */
 330                                         0x0  0x8  0x2  0x0  0x2  0x0    /* ENET1_RXD2_SER1_RXD2 */
 331                                         0x0  0x9  0x2  0x0  0x2  0x0    /* ENET1_RXD3_SER1_RXD3 */
 332                                         0x0  0x4  0x1  0x0  0x2  0x0    /* ENET1_TX_EN_SER1_RTS_B */
 333                                         0x0  0xc  0x2  0x0  0x3  0x0    /* ENET1_RX_DV_SER1_CTS_B */
 334                                         0x2  0x8  0x2  0x0  0x1  0x0    /* ENET1_GRXCLK */
 335                                         0x2  0x14 0x1  0x0  0x2  0x0>;  /* ENET1_GTXCLK */
 336                         };
 337
 338                         pio2: ucc_pin@02 {
 339                                 pio-map = <
 340                         /* port  pin  dir  open_drain  assignment  has_irq */
 341                                         0x2  0x1f 0x1  0x0  0x1  0x0    /* QE_MUX_MDC */
 342                                         0x2  0x1e 0x3  0x0  0x2  0x0    /* QE_MUX_MDIO */
 343                                         0x2  0x10 0x2  0x0  0x3  0x0    /* CLK17 */
 344                                         0x0  0xe  0x1  0x0  0x2  0x0    /* ENET2_TXD0_SER2_TXD0 */
 345                                         0x0  0xf  0x1  0x0  0x2  0x0    /* ENET2_TXD1_SER2_TXD1 */
 346                                         0x0  0x10 0x1  0x0  0x1  0x0    /* ENET2_TXD2_SER2_TXD2 */
 347                                         0x0  0x11 0x1  0x0  0x1  0x0    /* ENET2_TXD3_SER2_TXD3 */
 348                                         0x0  0x14 0x2  0x0  0x2  0x0    /* ENET2_RXD0_SER2_RXD0 */
 349                                         0x0  0x15 0x2  0x0  0x1  0x0    /* ENET2_RXD1_SER2_RXD1 */
 350                                         0x0  0x16 0x2  0x0  0x1  0x0    /* ENET2_RXD2_SER2_RXD2 */
 351                                         0x0  0x17 0x2  0x0  0x1  0x0    /* ENET2_RXD3_SER2_RXD3 */
 352                                         0x0  0x12 0x1  0x0  0x2  0x0    /* ENET2_TX_EN_SER2_RTS_B */
 353                                         0x0  0x1a 0x2  0x0  0x3  0x0    /* ENET2_RX_DV_SER2_CTS_B */
 354                                         0x2  0x3  0x2  0x0  0x1  0x0    /* ENET2_GRXCLK */
 355                                         0x2  0x2 0x1  0x0  0x2  0x0>;   /* ENET2_GTXCLK */
 356                         };
 357
 358                         pio3: ucc_pin@03 {
 359                                 pio-map = <
 360                         /* port  pin  dir  open_drain  assignment  has_irq */
 361                                         0x2  0x1f 0x1  0x0  0x1  0x0    /* QE_MUX_MDC */
 362                                         0x2  0x1e 0x3  0x0  0x2  0x0    /* QE_MUX_MDIO */
 363                                         0x2  0x0b 0x2  0x0  0x1  0x0    /* CLK12*/
 364                                         0x0  0x1d 0x1  0x0  0x2  0x0    /* ENET3_TXD0_SER3_TXD0 */
 365                                         0x0  0x1e 0x1  0x0  0x3  0x0    /* ENET3_TXD1_SER3_TXD1 */
 366                                         0x0  0x1f 0x1  0x0  0x2  0x0    /* ENET3_TXD2_SER3_TXD2 */
 367                                         0x1  0x0  0x1  0x0  0x3  0x0    /* ENET3_TXD3_SER3_TXD3 */
 368                                         0x1  0x3  0x2  0x0  0x3  0x0    /* ENET3_RXD0_SER3_RXD0 */
 369                                         0x1  0x4  0x2  0x0  0x1  0x0    /* ENET3_RXD1_SER3_RXD1 */
 370                                         0x1  0x5  0x2  0x0  0x2  0x0    /* ENET3_RXD2_SER3_RXD2 */
 371                                         0x1  0x6  0x2  0x0  0x3  0x0    /* ENET3_RXD3_SER3_RXD3 */
 372                                         0x1  0x1  0x1  0x0  0x1  0x0    /* ENET3_TX_EN_SER3_RTS_B */
 373                                         0x1  0x9  0x2  0x0  0x3  0x0    /* ENET3_RX_DV_SER3_CTS_B */
 374                                         0x2  0x9  0x2  0x0  0x2  0x0    /* ENET3_GRXCLK */
 375                                         0x2  0x19 0x1  0x0  0x2  0x0>;  /* ENET3_GTXCLK */
 376                         };
 377
 378                         pio4: ucc_pin@04 {
 379                                 pio-map = <
 380                         /* port  pin  dir  open_drain  assignment  has_irq */
 381                                         0x2  0x1f 0x1  0x0  0x1  0x0    /* QE_MUX_MDC */
 382                                         0x2  0x1e 0x3  0x0  0x2  0x0    /* QE_MUX_MDIO */
 383                                         0x2  0x10 0x2  0x0  0x3  0x0    /* CLK17 */
 384                                         0x1  0xc  0x1  0x0  0x2  0x0    /* ENET4_TXD0_SER4_TXD0 */
 385                                         0x1  0xd  0x1  0x0  0x2  0x0    /* ENET4_TXD1_SER4_TXD1 */
 386                                         0x1  0xe  0x1  0x0  0x1  0x0    /* ENET4_TXD2_SER4_TXD2 */
 387                                         0x1  0xf  0x1  0x0  0x2  0x0    /* ENET4_TXD3_SER4_TXD3 */
 388                                         0x1  0x12 0x2  0x0  0x2  0x0    /* ENET4_RXD0_SER4_RXD0 */
 389                                         0x1  0x13 0x2  0x0  0x1  0x0    /* ENET4_RXD1_SER4_RXD1 */
 390                                         0x1  0x14 0x2  0x0  0x1  0x0    /* ENET4_RXD2_SER4_RXD2 */
 391                                         0x1  0x15 0x2  0x0  0x2  0x0    /* ENET4_RXD3_SER4_RXD3 */
 392                                         0x1  0x10 0x1  0x0  0x2  0x0    /* ENET4_TX_EN_SER4_RTS_B */
 393                                         0x1  0x18 0x2  0x0  0x3  0x0    /* ENET4_RX_DV_SER4_CTS_B */
 394                                         0x2  0x11 0x2  0x0  0x2  0x0    /* ENET4_GRXCLK */
 395                                         0x2  0x18 0x1  0x0  0x2  0x0>;  /* ENET4_GTXCLK */
 396                         };
 397                 };
 398         };
 399
 400         qe@e0080000 {
 401                 #address-cells = <1>;
 402                 #size-cells = <1>;
 403                 device_type = "qe";
 404                 compatible = "fsl,qe";
 405                 ranges = <0x0 0xe0080000 0x40000>;
 406                 reg = <0xe0080000 0x480>;
 407                 brg-frequency = <0>;
 408                 bus-frequency = <0>;
 409                 fsl,qe-num-riscs = <4>;
 410                 fsl,qe-num-snums = <46>;
 411
 412                 qeic: interrupt-controller@80 {
 413                         interrupt-controller;
 414                         compatible = "fsl,qe-ic";
 415                         #address-cells = <0>;
 416                         #interrupt-cells = <1>;
 417                         reg = <0x80 0x80>;
 418                         interrupts = <46 2 46 2>; //high:30 low:30
 419                         interrupt-parent = <&mpic>;
 420                 };
 421
 422                 spi@4c0 {
 423                         #address-cells = <1>;
 424                         #size-cells = <0>;
 425                         compatible = "fsl,mpc8569-qe-spi", "fsl,spi";
 426                         reg = <0x4c0 0x40>;
 427                         cell-index = <0>;
 428                         interrupts = <2>;
 429                         interrupt-parent = <&qeic>;
 430                         gpios = <&qe_pio_e 30 0>;
 431                         mode = "cpu-qe";
 432
 433                         serial-flash@0 {
 434                                 compatible = "stm,m25p40";
 435                                 reg = <0>;
 436                                 spi-max-frequency = <25000000>;
 437                         };
 438                 };
 439
 440                 spi@500 {
 441                         cell-index = <1>;
 442                         compatible = "fsl,spi";
 443                         reg = <0x500 0x40>;
 444                         interrupts = <1>;
 445                         interrupt-parent = <&qeic>;
 446                         mode = "cpu";
 447                 };
 448
 449                 enet0: ucc@2000 {
 450                         device_type = "network";
 451                         compatible = "ucc_geth";
 452                         cell-index = <1>;
 453                         reg = <0x2000 0x200>;
 454                         interrupts = <32>;
 455                         interrupt-parent = <&qeic>;
 456                         local-mac-address = [ 00 00 00 00 00 00 ];
 457                         rx-clock-name = "none";
 458                         tx-clock-name = "clk12";
 459                         pio-handle = <&pio1>;
 460                         phy-handle = <&qe_phy0>;
 461                         phy-connection-type = "rgmii-id";
 462                 };
 463
 464                 mdio@2120 {
 465                         #address-cells = <1>;
 466                         #size-cells = <0>;
 467                         reg = <0x2120 0x18>;
 468                         compatible = "fsl,ucc-mdio";
 469
 470                         qe_phy0: ethernet-phy@07 {
 471                                 interrupt-parent = <&mpic>;
 472                                 interrupts = <1 1>;
 473                                 reg = <0x7>;
 474                                 device_type = "ethernet-phy";
 475                         };
 476                         qe_phy1: ethernet-phy@01 {
 477                                 interrupt-parent = <&mpic>;
 478                                 interrupts = <2 1>;
 479                                 reg = <0x1>;
 480                                 device_type = "ethernet-phy";
 481                         };
 482                         qe_phy2: ethernet-phy@02 {
 483                                 interrupt-parent = <&mpic>;
 484                                 interrupts = <3 1>;
 485                                 reg = <0x2>;
 486                                 device_type = "ethernet-phy";
 487                         };
 488                         qe_phy3: ethernet-phy@03 {
 489                                 interrupt-parent = <&mpic>;
 490                                 interrupts = <4 1>;
 491                                 reg = <0x3>;
 492                                 device_type = "ethernet-phy";
 493                         };
 494                         qe_phy5: ethernet-phy@04 {
 495                                 interrupt-parent = <&mpic>;
 496                                 reg = <0x04>;
 497                                 device_type = "ethernet-phy";
 498                         };
 499                         qe_phy7: ethernet-phy@06 {
 500                                 interrupt-parent = <&mpic>;
 501                                 reg = <0x6>;
 502                                 device_type = "ethernet-phy";
 503                         };
 504                         tbi-phy@11 {
 505                                 reg = <0x11>;
 506                                 device_type = "tbi-phy";
 507                         };
 508                 };
 509                 mdio@3520 {
 510                         #address-cells = <1>;
 511                         #size-cells = <0>;
 512                         reg = <0x3520 0x18>;
 513                         compatible = "fsl,ucc-mdio";
 514
 515                         tbi0: tbi-phy@15 {
 516                         reg = <0x15>;
 517                         device_type = "tbi-phy";
 518                         };
 519                 };
 520                 mdio@3720 {
 521                         #address-cells = <1>;
 522                         #size-cells = <0>;
 523                         reg = <0x3720 0x38>;
 524                         compatible = "fsl,ucc-mdio";
 525                         tbi1: tbi-phy@17 {
 526                                 reg = <0x17>;
 527                                 device_type = "tbi-phy";
 528                         };
 529                 };
 530
 531                 enet2: ucc@2200 {
 532                         device_type = "network";
 533                         compatible = "ucc_geth";
 534                         cell-index = <3>;
 535                         reg = <0x2200 0x200>;
 536                         interrupts = <34>;
 537                         interrupt-parent = <&qeic>;
 538                         local-mac-address = [ 00 00 00 00 00 00 ];
 539                         rx-clock-name = "none";
 540                         tx-clock-name = "clk12";
 541                         pio-handle = <&pio3>;
 542                         phy-handle = <&qe_phy2>;
 543                         phy-connection-type = "rgmii-id";
 544                 };
 545
 546                 enet1: ucc@3000 {
 547                         device_type = "network";
 548                         compatible = "ucc_geth";
 549                         cell-index = <2>;
 550                         reg = <0x3000 0x200>;
 551                         interrupts = <33>;
 552                         interrupt-parent = <&qeic>;
 553                         local-mac-address = [ 00 00 00 00 00 00 ];
 554                         rx-clock-name = "none";
 555                         tx-clock-name = "clk17";
 556                         pio-handle = <&pio2>;
 557                         phy-handle = <&qe_phy1>;
 558                         phy-connection-type = "rgmii-id";
 559                 };
 560
 561                 enet3: ucc@3200 {
 562                         device_type = "network";
 563                         compatible = "ucc_geth";
 564                         cell-index = <4>;
 565                         reg = <0x3200 0x200>;
 566                         interrupts = <35>;
 567                         interrupt-parent = <&qeic>;
 568                         local-mac-address = [ 00 00 00 00 00 00 ];
 569                         rx-clock-name = "none";
 570                         tx-clock-name = "clk17";
 571                         pio-handle = <&pio4>;
 572                         phy-handle = <&qe_phy3>;
 573                         phy-connection-type = "rgmii-id";
 574                 };
 575
 576                 enet5: ucc@3400 {
 577                         device_type = "network";
 578                         compatible = "ucc_geth";
 579                         cell-index = <6>;
 580                         reg = <0x3400 0x200>;
 581                         interrupts = <41>;
 582                         interrupt-parent = <&qeic>;
 583                         local-mac-address = [ 00 00 00 00 00 00 ];
 584                         rx-clock-name = "none";
 585                         tx-clock-name = "none";
 586                         tbi-handle = <&tbi0>;
 587                         phy-handle = <&qe_phy5>;
 588                         phy-connection-type = "sgmii";
 589                 };
 590
 591                 enet7: ucc@3600 {
 592                         device_type = "network";
 593                         compatible = "ucc_geth";
 594                         cell-index = <8>;
 595                         reg = <0x3600 0x200>;
 596                         interrupts = <43>;
 597                         interrupt-parent = <&qeic>;
 598                         local-mac-address = [ 00 00 00 00 00 00 ];
 599                         rx-clock-name = "none";
 600                         tx-clock-name = "none";
 601                         tbi-handle = <&tbi1>;
 602                         phy-handle = <&qe_phy7>;
 603                         phy-connection-type = "sgmii";
 604                 };
 605
 606                 muram@10000 {
 607                         #address-cells = <1>;
 608                         #size-cells = <1>;
 609                         compatible = "fsl,qe-muram", "fsl,cpm-muram";
 610                         ranges = <0x0 0x10000 0x20000>;
 611
 612                         data-only@0 {
 613                                 compatible = "fsl,qe-muram-data",
 614                                              "fsl,cpm-muram-data";
 615                                 reg = <0x0 0x20000>;
 616                         };
 617                 };
 618
 619         };
 620
 621         /* PCI Express */
 622         pci1: pcie@e000a000 {
 623                 compatible = "fsl,mpc8548-pcie";
 624                 device_type = "pci";
 625                 #interrupt-cells = <1>;
 626                 #size-cells = <2>;
 627                 #address-cells = <3>;
 628                 reg = <0xe000a000 0x1000>;
 629                 interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 630                 interrupt-map = <
 631                         /* IDSEL 0x0 (PEX) */
 632                         00000 0x0 0x0 0x1 &mpic 0x0 0x1
 633                         00000 0x0 0x0 0x2 &mpic 0x1 0x1
 634                         00000 0x0 0x0 0x3 &mpic 0x2 0x1
 635                         00000 0x0 0x0 0x4 &mpic 0x3 0x1>;
 636
 637                 interrupt-parent = <&mpic>;
 638                 interrupts = <26 2>;
 639                 bus-range = <0 255>;
 640                 ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000
 641                           0x1000000 0x0 0x00000000 0xe2800000 0x0 0x00800000>;
 642                 clock-frequency = <33333333>;
 643                 pcie@0 {
 644                         reg = <0x0 0x0 0x0 0x0 0x0>;
 645                         #size-cells = <2>;
 646                         #address-cells = <3>;
 647                         device_type = "pci";
 648                         ranges = <0x2000000 0x0 0xa0000000
 649                                   0x2000000 0x0 0xa0000000
 650                                   0x0 0x10000000
 651
 652                                   0x1000000 0x0 0x0
 653                                   0x1000000 0x0 0x0
 654                                   0x0 0x800000>;
 655                 };
 656         };
 657
 658         rio0: rapidio@e00c00000 {
 659                 #address-cells = <2>;
 660                 #size-cells = <2>;
 661                 compatible = "fsl,mpc8569-rapidio", "fsl,rapidio-delta";
 662                 reg = <0xe00c0000 0x20000>;
 663                 ranges = <0x0 0x0 0xc0000000 0x0 0x20000000>;
 664                 interrupts = <48 2 /* error     */
 665                               49 2 /* bell_outb */
 666                               50 2 /* bell_inb  */
 667                               53 2 /* msg1_tx   */
 668                               54 2 /* msg1_rx   */
 669                               55 2 /* msg2_tx   */
 670                               56 2 /* msg2_rx   */>;
 671                 interrupt-parent = <&mpic>;
 672         };
 673 };