arch/powerpc/boot/dts/mpc8568mds.dts

   1 /*
   2  * MPC8568E MDS Device Tree Source
   3  *
   4  * Copyright 2007, 2008 Freescale Semiconductor Inc.
   5  *
   6  * This program is free software; you can redistribute  it and/or modify it
   7  * under  the terms of  the GNU General  Public License as published by the
   8  * Free Software Foundation;  either version 2 of the  License, or (at your
   9  * option) any later version.
  10  */
  11
  12 /dts-v1/;
  13
  14 / {
  15         model = "MPC8568EMDS";
  16         compatible = "MPC8568EMDS", "MPC85xxMDS";
  17         #address-cells = <1>;
  18         #size-cells = <1>;
  19
  20         aliases {
  21                 ethernet0 = &enet0;
  22                 ethernet1 = &enet1;
  23                 ethernet2 = &enet2;
  24                 ethernet3 = &enet3;
  25                 serial0 = &serial0;
  26                 serial1 = &serial1;
  27                 pci0 = &pci0;
  28                 pci1 = &pci1;
  29         };
  30
  31         cpus {
  32                 #address-cells = <1>;
  33                 #size-cells = <0>;
  34
  35                 PowerPC,8568@0 {
  36                         device_type = "cpu";
  37                         reg = <0x0>;
  38                         d-cache-line-size = <32>;       // 32 bytes
  39                         i-cache-line-size = <32>;       // 32 bytes
  40                         d-cache-size = <0x8000>;                // L1, 32K
  41                         i-cache-size = <0x8000>;                // L1, 32K
  42                         timebase-frequency = <0>;
  43                         bus-frequency = <0>;
  44                         clock-frequency = <0>;
  45                         next-level-cache = <&L2>;
  46                 };
  47         };
  48
  49         memory {
  50                 device_type = "memory";
  51                 reg = <0x0 0x10000000>;
  52         };
  53
  54         bcsr@f8000000 {
  55                 compatible = "fsl,mpc8568mds-bcsr";
  56                 reg = <0xf8000000 0x8000>;
  57         };
  58
  59         soc8568@e0000000 {
  60                 #address-cells = <1>;
  61                 #size-cells = <1>;
  62                 device_type = "soc";
  63                 compatible = "simple-bus";
  64                 ranges = <0x0 0xe0000000 0x100000>;
  65                 reg = <0xe0000000 0x1000>;
  66                 bus-frequency = <0>;
  67
  68                 memory-controller@2000 {
  69                         compatible = "fsl,8568-memory-controller";
  70                         reg = <0x2000 0x1000>;
  71                         interrupt-parent = <&mpic>;
  72                         interrupts = <18 2>;
  73                 };
  74
  75                 L2: l2-cache-controller@20000 {
  76                         compatible = "fsl,8568-l2-cache-controller";
  77                         reg = <0x20000 0x1000>;
  78                         cache-line-size = <32>; // 32 bytes
  79                         cache-size = <0x80000>; // L2, 512K
  80                         interrupt-parent = <&mpic>;
  81                         interrupts = <16 2>;
  82                 };
  83
  84                 i2c@3000 {
  85                         #address-cells = <1>;
  86                         #size-cells = <0>;
  87                         cell-index = <0>;
  88                         compatible = "fsl-i2c";
  89                         reg = <0x3000 0x100>;
  90                         interrupts = <43 2>;
  91                         interrupt-parent = <&mpic>;
  92                         dfsrr;
  93
  94                         rtc@68 {
  95                                 compatible = "dallas,ds1374";
  96                                 reg = <0x68>;
  97                         };
  98                 };
  99
 100                 i2c@3100 {
 101                         #address-cells = <1>;
 102                         #size-cells = <0>;
 103                         cell-index = <1>;
 104                         compatible = "fsl-i2c";
 105                         reg = <0x3100 0x100>;
 106                         interrupts = <43 2>;
 107                         interrupt-parent = <&mpic>;
 108                         dfsrr;
 109                 };
 110
 111                 dma@21300 {
 112                         #address-cells = <1>;
 113                         #size-cells = <1>;
 114                         compatible = "fsl,mpc8568-dma", "fsl,eloplus-dma";
 115                         reg = <0x21300 0x4>;
 116                         ranges = <0x0 0x21100 0x200>;
 117                         cell-index = <0>;
 118                         dma-channel@0 {
 119                                 compatible = "fsl,mpc8568-dma-channel",
 120                                                 "fsl,eloplus-dma-channel";
 121                                 reg = <0x0 0x80>;
 122                                 cell-index = <0>;
 123                                 interrupt-parent = <&mpic>;
 124                                 interrupts = <20 2>;
 125                         };
 126                         dma-channel@80 {
 127                                 compatible = "fsl,mpc8568-dma-channel",
 128                                                 "fsl,eloplus-dma-channel";
 129                                 reg = <0x80 0x80>;
 130                                 cell-index = <1>;
 131                                 interrupt-parent = <&mpic>;
 132                                 interrupts = <21 2>;
 133                         };
 134                         dma-channel@100 {
 135                                 compatible = "fsl,mpc8568-dma-channel",
 136                                                 "fsl,eloplus-dma-channel";
 137                                 reg = <0x100 0x80>;
 138                                 cell-index = <2>;
 139                                 interrupt-parent = <&mpic>;
 140                                 interrupts = <22 2>;
 141                         };
 142                         dma-channel@180 {
 143                                 compatible = "fsl,mpc8568-dma-channel",
 144                                                 "fsl,eloplus-dma-channel";
 145                                 reg = <0x180 0x80>;
 146                                 cell-index = <3>;
 147                                 interrupt-parent = <&mpic>;
 148                                 interrupts = <23 2>;
 149                         };
 150                 };
 151
 152                 enet0: ethernet@24000 {
 153                         #address-cells = <1>;
 154                         #size-cells = <1>;
 155                         cell-index = <0>;
 156                         device_type = "network";
 157                         model = "eTSEC";
 158                         compatible = "gianfar";
 159                         reg = <0x24000 0x1000>;
 160                         ranges = <0x0 0x24000 0x1000>;
 161                         local-mac-address = [ 00 00 00 00 00 00 ];
 162                         interrupts = <29 2 30 2 34 2>;
 163                         interrupt-parent = <&mpic>;
 164                         tbi-handle = <&tbi0>;
 165                         phy-handle = <&phy2>;
 166
 167                         mdio@520 {
 168                                 #address-cells = <1>;
 169                                 #size-cells = <0>;
 170                                 compatible = "fsl,gianfar-mdio";
 171                                 reg = <0x520 0x20>;
 172
 173                                 phy0: ethernet-phy@7 {
 174                                         interrupt-parent = <&mpic>;
 175                                         interrupts = <1 1>;
 176                                         reg = <0x7>;
 177                                         device_type = "ethernet-phy";
 178                                 };
 179                                 phy1: ethernet-phy@1 {
 180                                         interrupt-parent = <&mpic>;
 181                                         interrupts = <2 1>;
 182                                         reg = <0x1>;
 183                                         device_type = "ethernet-phy";
 184                                 };
 185                                 phy2: ethernet-phy@2 {
 186                                         interrupt-parent = <&mpic>;
 187                                         interrupts = <1 1>;
 188                                         reg = <0x2>;
 189                                         device_type = "ethernet-phy";
 190                                 };
 191                                 phy3: ethernet-phy@3 {
 192                                         interrupt-parent = <&mpic>;
 193                                         interrupts = <2 1>;
 194                                         reg = <0x3>;
 195                                         device_type = "ethernet-phy";
 196                                 };
 197                                 tbi0: tbi-phy@11 {
 198                                         reg = <0x11>;
 199                                         device_type = "tbi-phy";
 200                                 };
 201                         };
 202                 };
 203
 204                 enet1: ethernet@25000 {
 205                         #address-cells = <1>;
 206                         #size-cells = <1>;
 207                         cell-index = <1>;
 208                         device_type = "network";
 209                         model = "eTSEC";
 210                         compatible = "gianfar";
 211                         reg = <0x25000 0x1000>;
 212                         ranges = <0x0 0x25000 0x1000>;
 213                         local-mac-address = [ 00 00 00 00 00 00 ];
 214                         interrupts = <35 2 36 2 40 2>;
 215                         interrupt-parent = <&mpic>;
 216                         tbi-handle = <&tbi1>;
 217                         phy-handle = <&phy3>;
 218
 219                         mdio@520 {
 220                                 #address-cells = <1>;
 221                                 #size-cells = <0>;
 222                                 compatible = "fsl,gianfar-tbi";
 223                                 reg = <0x520 0x20>;
 224
 225                                 tbi1: tbi-phy@11 {
 226                                         reg = <0x11>;
 227                                         device_type = "tbi-phy";
 228                                 };
 229                         };
 230                 };
 231
 232                 serial0: serial@4500 {
 233                         cell-index = <0>;
 234                         device_type = "serial";
 235                         compatible = "ns16550";
 236                         reg = <0x4500 0x100>;
 237                         clock-frequency = <0>;
 238                         interrupts = <42 2>;
 239                         interrupt-parent = <&mpic>;
 240                 };
 241
 242                 global-utilities@e0000 {        //global utilities block
 243                         compatible = "fsl,mpc8548-guts";
 244                         reg = <0xe0000 0x1000>;
 245                         fsl,has-rstcr;
 246                 };
 247
 248                 serial1: serial@4600 {
 249                         cell-index = <1>;
 250                         device_type = "serial";
 251                         compatible = "ns16550";
 252                         reg = <0x4600 0x100>;
 253                         clock-frequency = <0>;
 254                         interrupts = <42 2>;
 255                         interrupt-parent = <&mpic>;
 256                 };
 257
 258                 crypto@30000 {
 259                         compatible = "fsl,sec2.1", "fsl,sec2.0";
 260                         reg = <0x30000 0x10000>;
 261                         interrupts = <45 2>;
 262                         interrupt-parent = <&mpic>;
 263                         fsl,num-channels = <4>;
 264                         fsl,channel-fifo-len = <24>;
 265                         fsl,exec-units-mask = <0xfe>;
 266                         fsl,descriptor-types-mask = <0x12b0ebf>;
 267                 };
 268
 269                 mpic: pic@40000 {
 270                         interrupt-controller;
 271                         #address-cells = <0>;
 272                         #interrupt-cells = <2>;
 273                         reg = <0x40000 0x40000>;
 274                         compatible = "chrp,open-pic";
 275                         device_type = "open-pic";
 276                 };
 277
 278                 par_io@e0100 {
 279                         reg = <0xe0100 0x100>;
 280                         device_type = "par_io";
 281                         num-ports = <7>;
 282
 283                         pio1: ucc_pin@01 {
 284                                 pio-map = <
 285                         /* port  pin  dir  open_drain  assignment  has_irq */
 286                                         0x4  0xa  0x1  0x0  0x2  0x0    /* TxD0 */
 287                                         0x4  0x9  0x1  0x0  0x2  0x0    /* TxD1 */
 288                                         0x4  0x8  0x1  0x0  0x2  0x0    /* TxD2 */
 289                                         0x4  0x7  0x1  0x0  0x2  0x0    /* TxD3 */
 290                                         0x4  0x17  0x1  0x0  0x2  0x0   /* TxD4 */
 291                                         0x4  0x16  0x1  0x0  0x2  0x0   /* TxD5 */
 292                                         0x4  0x15  0x1  0x0  0x2  0x0   /* TxD6 */
 293                                         0x4  0x14  0x1  0x0  0x2  0x0   /* TxD7 */
 294                                         0x4  0xf  0x2  0x0  0x2  0x0    /* RxD0 */
 295                                         0x4  0xe  0x2  0x0  0x2  0x0    /* RxD1 */
 296                                         0x4  0xd  0x2  0x0  0x2  0x0    /* RxD2 */
 297                                         0x4  0xc  0x2  0x0  0x2  0x0    /* RxD3 */
 298                                         0x4  0x1d  0x2  0x0  0x2  0x0   /* RxD4 */
 299                                         0x4  0x1c  0x2  0x0  0x2  0x0   /* RxD5 */
 300                                         0x4  0x1b  0x2  0x0  0x2  0x0   /* RxD6 */
 301                                         0x4  0x1a  0x2  0x0  0x2  0x0   /* RxD7 */
 302                                         0x4  0xb  0x1  0x0  0x2  0x0    /* TX_EN */
 303                                         0x4  0x18  0x1  0x0  0x2  0x0   /* TX_ER */
 304                                         0x4  0x10  0x2  0x0  0x2  0x0   /* RX_DV */
 305                                         0x4  0x1e  0x2  0x0  0x2  0x0   /* RX_ER */
 306                                         0x4  0x11  0x2  0x0  0x2  0x0   /* RX_CLK */
 307                                         0x4  0x13  0x1  0x0  0x2  0x0   /* GTX_CLK */
 308                                         0x1  0x1f  0x2  0x0  0x3  0x0>; /* GTX125 */
 309                         };
 310
 311                         pio2: ucc_pin@02 {
 312                                 pio-map = <
 313                         /* port  pin  dir  open_drain  assignment  has_irq */
 314                                         0x5  0xa 0x1  0x0  0x2  0x0   /* TxD0 */
 315                                         0x5  0x9 0x1  0x0  0x2  0x0   /* TxD1 */
 316                                         0x5  0x8 0x1  0x0  0x2  0x0   /* TxD2 */
 317                                         0x5  0x7 0x1  0x0  0x2  0x0   /* TxD3 */
 318                                         0x5  0x17 0x1  0x0  0x2  0x0   /* TxD4 */
 319                                         0x5  0x16 0x1  0x0  0x2  0x0   /* TxD5 */
 320                                         0x5  0x15 0x1  0x0  0x2  0x0   /* TxD6 */
 321                                         0x5  0x14 0x1  0x0  0x2  0x0   /* TxD7 */
 322                                         0x5  0xf 0x2  0x0  0x2  0x0   /* RxD0 */
 323                                         0x5  0xe 0x2  0x0  0x2  0x0   /* RxD1 */
 324                                         0x5  0xd 0x2  0x0  0x2  0x0   /* RxD2 */
 325                                         0x5  0xc 0x2  0x0  0x2  0x0   /* RxD3 */
 326                                         0x5  0x1d 0x2  0x0  0x2  0x0   /* RxD4 */
 327                                         0x5  0x1c 0x2  0x0  0x2  0x0   /* RxD5 */
 328                                         0x5  0x1b 0x2  0x0  0x2  0x0   /* RxD6 */
 329                                         0x5  0x1a 0x2  0x0  0x2  0x0   /* RxD7 */
 330                                         0x5  0xb 0x1  0x0  0x2  0x0   /* TX_EN */
 331                                         0x5  0x18 0x1  0x0  0x2  0x0   /* TX_ER */
 332                                         0x5  0x10 0x2  0x0  0x2  0x0   /* RX_DV */
 333                                         0x5  0x1e 0x2  0x0  0x2  0x0   /* RX_ER */
 334                                         0x5  0x11 0x2  0x0  0x2  0x0   /* RX_CLK */
 335                                         0x5  0x13 0x1  0x0  0x2  0x0   /* GTX_CLK */
 336                                         0x1  0x1f 0x2  0x0  0x3  0x0   /* GTX125 */
 337                                         0x4  0x6 0x3  0x0  0x2  0x0   /* MDIO */
 338                                         0x4  0x5 0x1  0x0  0x2  0x0>; /* MDC */
 339                         };
 340                 };
 341         };
 342
 343         qe@e0080000 {
 344                 #address-cells = <1>;
 345                 #size-cells = <1>;
 346                 device_type = "qe";
 347                 compatible = "fsl,qe";
 348                 ranges = <0x0 0xe0080000 0x40000>;
 349                 reg = <0xe0080000 0x480>;
 350                 brg-frequency = <0>;
 351                 bus-frequency = <396000000>;
 352
 353                 muram@10000 {
 354                         #address-cells = <1>;
 355                         #size-cells = <1>;
 356                         compatible = "fsl,qe-muram", "fsl,cpm-muram";
 357                         ranges = <0x0 0x10000 0x10000>;
 358
 359                         data-only@0 {
 360                                 compatible = "fsl,qe-muram-data",
 361                                              "fsl,cpm-muram-data";
 362                                 reg = <0x0 0x10000>;
 363                         };
 364                 };
 365
 366                 spi@4c0 {
 367                         cell-index = <0>;
 368                         compatible = "fsl,spi";
 369                         reg = <0x4c0 0x40>;
 370                         interrupts = <2>;
 371                         interrupt-parent = <&qeic>;
 372                         mode = "cpu";
 373                 };
 374
 375                 spi@500 {
 376                         cell-index = <1>;
 377                         compatible = "fsl,spi";
 378                         reg = <0x500 0x40>;
 379                         interrupts = <1>;
 380                         interrupt-parent = <&qeic>;
 381                         mode = "cpu";
 382                 };
 383
 384                 enet2: ucc@2000 {
 385                         device_type = "network";
 386                         compatible = "ucc_geth";
 387                         cell-index = <1>;
 388                         reg = <0x2000 0x200>;
 389                         interrupts = <32>;
 390                         interrupt-parent = <&qeic>;
 391                         local-mac-address = [ 00 00 00 00 00 00 ];
 392                         rx-clock-name = "none";
 393                         tx-clock-name = "clk16";
 394                         pio-handle = <&pio1>;
 395                         phy-handle = <&phy0>;
 396                         phy-connection-type = "rgmii-id";
 397                 };
 398
 399                 enet3: ucc@3000 {
 400                         device_type = "network";
 401                         compatible = "ucc_geth";
 402                         cell-index = <2>;
 403                         reg = <0x3000 0x200>;
 404                         interrupts = <33>;
 405                         interrupt-parent = <&qeic>;
 406                         local-mac-address = [ 00 00 00 00 00 00 ];
 407                         rx-clock-name = "none";
 408                         tx-clock-name = "clk16";
 409                         pio-handle = <&pio2>;
 410                         phy-handle = <&phy1>;
 411                         phy-connection-type = "rgmii-id";
 412                 };
 413
 414                 mdio@2120 {
 415                         #address-cells = <1>;
 416                         #size-cells = <0>;
 417                         reg = <0x2120 0x18>;
 418                         compatible = "fsl,ucc-mdio";
 419
 420                         /* These are the same PHYs as on
 421                          * gianfar's MDIO bus */
 422                         qe_phy0: ethernet-phy@07 {
 423                                 interrupt-parent = <&mpic>;
 424                                 interrupts = <1 1>;
 425                                 reg = <0x7>;
 426                                 device_type = "ethernet-phy";
 427                         };
 428                         qe_phy1: ethernet-phy@01 {
 429                                 interrupt-parent = <&mpic>;
 430                                 interrupts = <2 1>;
 431                                 reg = <0x1>;
 432                                 device_type = "ethernet-phy";
 433                         };
 434                         qe_phy2: ethernet-phy@02 {
 435                                 interrupt-parent = <&mpic>;
 436                                 interrupts = <1 1>;
 437                                 reg = <0x2>;
 438                                 device_type = "ethernet-phy";
 439                         };
 440                         qe_phy3: ethernet-phy@03 {
 441                                 interrupt-parent = <&mpic>;
 442                                 interrupts = <2 1>;
 443                                 reg = <0x3>;
 444                                 device_type = "ethernet-phy";
 445                         };
 446                 };
 447
 448                 qeic: interrupt-controller@80 {
 449                         interrupt-controller;
 450                         compatible = "fsl,qe-ic";
 451                         #address-cells = <0>;
 452                         #interrupt-cells = <1>;
 453                         reg = <0x80 0x80>;
 454                         big-endian;
 455                         interrupts = <46 2 46 2>; //high:30 low:30
 456                         interrupt-parent = <&mpic>;
 457                 };
 458
 459         };
 460
 461         pci0: pci@e0008000 {
 462                 cell-index = <0>;
 463                 interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 464                 interrupt-map = <
 465                         /* IDSEL 0x12 AD18 */
 466                         0x9000 0x0 0x0 0x1 &mpic 0x5 0x1
 467                         0x9000 0x0 0x0 0x2 &mpic 0x6 0x1
 468                         0x9000 0x0 0x0 0x3 &mpic 0x7 0x1
 469                         0x9000 0x0 0x0 0x4 &mpic 0x4 0x1
 470
 471                         /* IDSEL 0x13 AD19 */
 472                         0x9800 0x0 0x0 0x1 &mpic 0x6 0x1
 473                         0x9800 0x0 0x0 0x2 &mpic 0x7 0x1
 474                         0x9800 0x0 0x0 0x3 &mpic 0x4 0x1
 475                         0x9800 0x0 0x0 0x4 &mpic 0x5 0x1>;
 476
 477                 interrupt-parent = <&mpic>;
 478                 interrupts = <24 2>;
 479                 bus-range = <0 255>;
 480                 ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000
 481                           0x1000000 0x0 0x0 0xe2000000 0x0 0x800000>;
 482                 clock-frequency = <66666666>;
 483                 #interrupt-cells = <1>;
 484                 #size-cells = <2>;
 485                 #address-cells = <3>;
 486                 reg = <0xe0008000 0x1000>;
 487                 compatible = "fsl,mpc8540-pci";
 488                 device_type = "pci";
 489         };
 490
 491         /* PCI Express */
 492         pci1: pcie@e000a000 {
 493                 cell-index = <2>;
 494                 interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 495                 interrupt-map = <
 496
 497                         /* IDSEL 0x0 (PEX) */
 498                         00000 0x0 0x0 0x1 &mpic 0x0 0x1
 499                         00000 0x0 0x0 0x2 &mpic 0x1 0x1
 500                         00000 0x0 0x0 0x3 &mpic 0x2 0x1
 501                         00000 0x0 0x0 0x4 &mpic 0x3 0x1>;
 502
 503                 interrupt-parent = <&mpic>;
 504                 interrupts = <26 2>;
 505                 bus-range = <0 255>;
 506                 ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000
 507                           0x1000000 0x0 0x0 0xe2800000 0x0 0x800000>;
 508                 clock-frequency = <33333333>;
 509                 #interrupt-cells = <1>;
 510                 #size-cells = <2>;
 511                 #address-cells = <3>;
 512                 reg = <0xe000a000 0x1000>;
 513                 compatible = "fsl,mpc8548-pcie";
 514                 device_type = "pci";
 515                 pcie@0 {
 516                         reg = <0x0 0x0 0x0 0x0 0x0>;
 517                         #size-cells = <2>;
 518                         #address-cells = <3>;
 519                         device_type = "pci";
 520                         ranges = <0x2000000 0x0 0xa0000000
 521                                   0x2000000 0x0 0xa0000000
 522                                   0x0 0x10000000
 523
 524                                   0x1000000 0x0 0x0
 525                                   0x1000000 0x0 0x0
 526                                   0x0 0x800000>;
 527                 };
 528         };
 529 };