arch/powerpc/boot/dts/mpc8379_rdb.dts

   1 /*
   2  * MPC8379E RDB Device Tree Source
   3  *
   4  * Copyright 2007, 2008 Freescale Semiconductor Inc.
   5  *
   6  * This program is free software; you can redistribute  it and/or modify it
   7  * under  the terms of  the GNU General  Public License as published by the
   8  * Free Software Foundation;  either version 2 of the  License, or (at your
   9  * option) any later version.
  10  */
  11
  12 /dts-v1/;
  13
  14 / {
  15         compatible = "fsl,mpc8379rdb";
  16         #address-cells = <1>;
  17         #size-cells = <1>;
  18
  19         aliases {
  20                 ethernet0 = &enet0;
  21                 ethernet1 = &enet1;
  22                 serial0 = &serial0;
  23                 serial1 = &serial1;
  24                 pci0 = &pci0;
  25         };
  26
  27         cpus {
  28                 #address-cells = <1>;
  29                 #size-cells = <0>;
  30
  31                 PowerPC,8379@0 {
  32                         device_type = "cpu";
  33                         reg = <0x0>;
  34                         d-cache-line-size = <32>;
  35                         i-cache-line-size = <32>;
  36                         d-cache-size = <32768>;
  37                         i-cache-size = <32768>;
  38                         timebase-frequency = <0>;
  39                         bus-frequency = <0>;
  40                         clock-frequency = <0>;
  41                 };
  42         };
  43
  44         memory {
  45                 device_type = "memory";
  46                 reg = <0x00000000 0x10000000>;  // 256MB at 0
  47         };
  48
  49         localbus@e0005000 {
  50                 #address-cells = <2>;
  51                 #size-cells = <1>;
  52                 compatible = "fsl,mpc8379-elbc", "fsl,elbc", "simple-bus";
  53                 reg = <0xe0005000 0x1000>;
  54                 interrupts = <77 0x8>;
  55                 interrupt-parent = <&ipic>;
  56
  57                 // CS0 and CS1 are swapped when
  58                 // booting from nand, but the
  59                 // addresses are the same.
  60                 ranges = <0x0 0x0 0xfe000000 0x00800000
  61                           0x1 0x0 0xe0600000 0x00008000
  62                           0x2 0x0 0xf0000000 0x00020000
  63                           0x3 0x0 0xfa000000 0x00008000>;
  64
  65                 flash@0,0 {
  66                         #address-cells = <1>;
  67                         #size-cells = <1>;
  68                         compatible = "cfi-flash";
  69                         reg = <0x0 0x0 0x800000>;
  70                         bank-width = <2>;
  71                         device-width = <1>;
  72                 };
  73
  74                 nand@1,0 {
  75                         #address-cells = <1>;
  76                         #size-cells = <1>;
  77                         compatible = "fsl,mpc8379-fcm-nand",
  78                                      "fsl,elbc-fcm-nand";
  79                         reg = <0x1 0x0 0x8000>;
  80
  81                         u-boot@0 {
  82                                 reg = <0x0 0x100000>;
  83                                 read-only;
  84                         };
  85
  86                         kernel@100000 {
  87                                 reg = <0x100000 0x300000>;
  88                         };
  89                         fs@400000 {
  90                                 reg = <0x400000 0x1c00000>;
  91                         };
  92                 };
  93         };
  94
  95         immr@e0000000 {
  96                 #address-cells = <1>;
  97                 #size-cells = <1>;
  98                 device_type = "soc";
  99                 compatible = "simple-bus";
 100                 ranges = <0x0 0xe0000000 0x00100000>;
 101                 reg = <0xe0000000 0x00000200>;
 102                 bus-frequency = <0>;
 103
 104                 wdt@200 {
 105                         device_type = "watchdog";
 106                         compatible = "mpc83xx_wdt";
 107                         reg = <0x200 0x100>;
 108                 };
 109
 110                 i2c@3000 {
 111                         #address-cells = <1>;
 112                         #size-cells = <0>;
 113                         cell-index = <0>;
 114                         compatible = "fsl-i2c";
 115                         reg = <0x3000 0x100>;
 116                         interrupts = <14 0x8>;
 117                         interrupt-parent = <&ipic>;
 118                         dfsrr;
 119                         rtc@68 {
 120                                 device_type = "rtc";
 121                                 compatible = "dallas,ds1339";
 122                                 reg = <0x68>;
 123                         };
 124                 };
 125
 126                 i2c@3100 {
 127                         #address-cells = <1>;
 128                         #size-cells = <0>;
 129                         cell-index = <1>;
 130                         compatible = "fsl-i2c";
 131                         reg = <0x3100 0x100>;
 132                         interrupts = <15 0x8>;
 133                         interrupt-parent = <&ipic>;
 134                         dfsrr;
 135                 };
 136
 137                 spi@7000 {
 138                         cell-index = <0>;
 139                         compatible = "fsl,spi";
 140                         reg = <0x7000 0x1000>;
 141                         interrupts = <16 0x8>;
 142                         interrupt-parent = <&ipic>;
 143                         mode = "cpu";
 144                 };
 145
 146                 dma@82a8 {
 147                         #address-cells = <1>;
 148                         #size-cells = <1>;
 149                         compatible = "fsl,mpc8379-dma", "fsl,elo-dma";
 150                         reg = <0x82a8 4>;
 151                         ranges = <0 0x8100 0x1a8>;
 152                         interrupt-parent = <&ipic>;
 153                         interrupts = <71 8>;
 154                         cell-index = <0>;
 155                         dma-channel@0 {
 156                                 compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
 157                                 reg = <0 0x80>;
 158                                 interrupt-parent = <&ipic>;
 159                                 interrupts = <71 8>;
 160                         };
 161                         dma-channel@80 {
 162                                 compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
 163                                 reg = <0x80 0x80>;
 164                                 interrupt-parent = <&ipic>;
 165                                 interrupts = <71 8>;
 166                         };
 167                         dma-channel@100 {
 168                                 compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
 169                                 reg = <0x100 0x80>;
 170                                 interrupt-parent = <&ipic>;
 171                                 interrupts = <71 8>;
 172                         };
 173                         dma-channel@180 {
 174                                 compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
 175                                 reg = <0x180 0x28>;
 176                                 interrupt-parent = <&ipic>;
 177                                 interrupts = <71 8>;
 178                         };
 179                 };
 180
 181                 usb@23000 {
 182                         compatible = "fsl-usb2-dr";
 183                         reg = <0x23000 0x1000>;
 184                         #address-cells = <1>;
 185                         #size-cells = <0>;
 186                         interrupt-parent = <&ipic>;
 187                         interrupts = <38 0x8>;
 188                         phy_type = "ulpi";
 189                 };
 190
 191                 mdio@24520 {
 192                         #address-cells = <1>;
 193                         #size-cells = <0>;
 194                         compatible = "fsl,gianfar-mdio";
 195                         reg = <0x24520 0x20>;
 196                         phy2: ethernet-phy@2 {
 197                                 interrupt-parent = <&ipic>;
 198                                 interrupts = <17 0x8>;
 199                                 reg = <0x2>;
 200                                 device_type = "ethernet-phy";
 201                         };
 202                 };
 203
 204                 enet0: ethernet@24000 {
 205                         cell-index = <0>;
 206                         device_type = "network";
 207                         model = "eTSEC";
 208                         compatible = "gianfar";
 209                         reg = <0x24000 0x1000>;
 210                         local-mac-address = [ 00 00 00 00 00 00 ];
 211                         interrupts = <32 0x8 33 0x8 34 0x8>;
 212                         phy-connection-type = "mii";
 213                         interrupt-parent = <&ipic>;
 214                         phy-handle = <&phy2>;
 215                 };
 216
 217                 enet1: ethernet@25000 {
 218                         cell-index = <1>;
 219                         device_type = "network";
 220                         model = "eTSEC";
 221                         compatible = "gianfar";
 222                         reg = <0x25000 0x1000>;
 223                         local-mac-address = [ 00 00 00 00 00 00 ];
 224                         interrupts = <35 0x8 36 0x8 37 0x8>;
 225                         phy-connection-type = "mii";
 226                         interrupt-parent = <&ipic>;
 227                         fixed-link = <1 1 1000 0 0>;
 228                 };
 229
 230                 serial0: serial@4500 {
 231                         cell-index = <0>;
 232                         device_type = "serial";
 233                         compatible = "ns16550";
 234                         reg = <0x4500 0x100>;
 235                         clock-frequency = <0>;
 236                         interrupts = <9 0x8>;
 237                         interrupt-parent = <&ipic>;
 238                 };
 239
 240                 serial1: serial@4600 {
 241                         cell-index = <1>;
 242                         device_type = "serial";
 243                         compatible = "ns16550";
 244                         reg = <0x4600 0x100>;
 245                         clock-frequency = <0>;
 246                         interrupts = <10 0x8>;
 247                         interrupt-parent = <&ipic>;
 248                 };
 249
 250                 crypto@30000 {
 251                         compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
 252                                      "fsl,sec2.1", "fsl,sec2.0";
 253                         reg = <0x30000 0x10000>;
 254                         interrupts = <11 0x8>;
 255                         interrupt-parent = <&ipic>;
 256                         fsl,num-channels = <4>;
 257                         fsl,channel-fifo-len = <24>;
 258                         fsl,exec-units-mask = <0x9fe>;
 259                         fsl,descriptor-types-mask = <0x3ab0ebf>;
 260                 };
 261
 262                 sata@18000 {
 263                         compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
 264                         reg = <0x18000 0x1000>;
 265                         interrupts = <44 0x8>;
 266                         interrupt-parent = <&ipic>;
 267                 };
 268
 269                 sata@19000 {
 270                         compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
 271                         reg = <0x19000 0x1000>;
 272                         interrupts = <45 0x8>;
 273                         interrupt-parent = <&ipic>;
 274                 };
 275
 276                 sata@1a000 {
 277                         compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
 278                         reg = <0x1a000 0x1000>;
 279                         interrupts = <46 0x8>;
 280                         interrupt-parent = <&ipic>;
 281                 };
 282
 283                 sata@1b000 {
 284                         compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
 285                         reg = <0x1b000 0x1000>;
 286                         interrupts = <47 0x8>;
 287                         interrupt-parent = <&ipic>;
 288                 };
 289
 290                 /* IPIC
 291                  * interrupts cell = <intr #, sense>
 292                  * sense values match linux IORESOURCE_IRQ_* defines:
 293                  * sense == 8: Level, low assertion
 294                  * sense == 2: Edge, high-to-low change
 295                  */
 296                 ipic: interrupt-controller@700 {
 297                         compatible = "fsl,ipic";
 298                         interrupt-controller;
 299                         #address-cells = <0>;
 300                         #interrupt-cells = <2>;
 301                         reg = <0x700 0x100>;
 302                 };
 303         };
 304
 305         pci0: pci@e0008500 {
 306                 interrupt-map-mask = <0xf800 0 0 7>;
 307                 interrupt-map = <
 308                                 /* IRQ5 = 21 = 0x15, IRQ6 = 0x16, IRQ7 = 23 = 0x17 */
 309
 310                                 /* IDSEL AD14 IRQ6 inta */
 311                                  0x7000 0x0 0x0 0x1 &ipic 22 0x8
 312
 313                                 /* IDSEL AD15 IRQ5 inta, IRQ6 intb, IRQ7 intd */
 314                                  0x7800 0x0 0x0 0x1 &ipic 21 0x8
 315                                  0x7800 0x0 0x0 0x2 &ipic 22 0x8
 316                                  0x7800 0x0 0x0 0x4 &ipic 23 0x8
 317
 318                                 /* IDSEL AD28 IRQ7 inta, IRQ5 intb IRQ6 intc*/
 319                                  0xE000 0x0 0x0 0x1 &ipic 23 0x8
 320                                  0xE000 0x0 0x0 0x2 &ipic 21 0x8
 321                                  0xE000 0x0 0x0 0x3 &ipic 22 0x8>;
 322                 interrupt-parent = <&ipic>;
 323                 interrupts = <66 0x8>;
 324                 bus-range = <0x0 0x0>;
 325                 ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
 326                           0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
 327                           0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>;
 328                 clock-frequency = <66666666>;
 329                 #interrupt-cells = <1>;
 330                 #size-cells = <2>;
 331                 #address-cells = <3>;
 332                 reg = <0xe0008500 0x100>;
 333                 compatible = "fsl,mpc8349-pci";
 334                 device_type = "pci";
 335         };
 336 };