arch/powerpc/boot/dts/mpc8379_rdb.dts

   1 /*
   2  * MPC8379E RDB Device Tree Source
   3  *
   4  * Copyright 2007, 2008 Freescale Semiconductor Inc.
   5  *
   6  * This program is free software; you can redistribute  it and/or modify it
   7  * under  the terms of  the GNU General  Public License as published by the
   8  * Free Software Foundation;  either version 2 of the  License, or (at your
   9  * option) any later version.
  10  */
  11
  12 /dts-v1/;
  13
  14 / {
  15         compatible = "fsl,mpc8379rdb";
  16         #address-cells = <1>;
  17         #size-cells = <1>;
  18
  19         aliases {
  20                 ethernet0 = &enet0;
  21                 ethernet1 = &enet1;
  22                 serial0 = &serial0;
  23                 serial1 = &serial1;
  24                 pci0 = &pci0;
  25         };
  26
  27         cpus {
  28                 #address-cells = <1>;
  29                 #size-cells = <0>;
  30
  31                 PowerPC,8379@0 {
  32                         device_type = "cpu";
  33                         reg = <0x0>;
  34                         d-cache-line-size = <32>;
  35                         i-cache-line-size = <32>;
  36                         d-cache-size = <32768>;
  37                         i-cache-size = <32768>;
  38                         timebase-frequency = <0>;
  39                         bus-frequency = <0>;
  40                         clock-frequency = <0>;
  41                 };
  42         };
  43
  44         memory {
  45                 device_type = "memory";
  46                 reg = <0x00000000 0x10000000>;  // 256MB at 0
  47         };
  48
  49         localbus@e0005000 {
  50                 #address-cells = <2>;
  51                 #size-cells = <1>;
  52                 compatible = "fsl,mpc8379-elbc", "fsl,elbc", "simple-bus";
  53                 reg = <0xe0005000 0x1000>;
  54                 interrupts = <77 0x8>;
  55                 interrupt-parent = <&ipic>;
  56
  57                 // CS0 and CS1 are swapped when
  58                 // booting from nand, but the
  59                 // addresses are the same.
  60                 ranges = <0x0 0x0 0xfe000000 0x00800000
  61                           0x1 0x0 0xe0600000 0x00008000
  62                           0x2 0x0 0xf0000000 0x00020000
  63                           0x3 0x0 0xfa000000 0x00008000>;
  64
  65                 flash@0,0 {
  66                         #address-cells = <1>;
  67                         #size-cells = <1>;
  68                         compatible = "cfi-flash";
  69                         reg = <0x0 0x0 0x800000>;
  70                         bank-width = <2>;
  71                         device-width = <1>;
  72                 };
  73
  74                 nand@1,0 {
  75                         #address-cells = <1>;
  76                         #size-cells = <1>;
  77                         compatible = "fsl,mpc8379-fcm-nand",
  78                                      "fsl,elbc-fcm-nand";
  79                         reg = <0x1 0x0 0x8000>;
  80
  81                         u-boot@0 {
  82                                 reg = <0x0 0x100000>;
  83                                 read-only;
  84                         };
  85
  86                         kernel@100000 {
  87                                 reg = <0x100000 0x300000>;
  88                         };
  89                         fs@400000 {
  90                                 reg = <0x400000 0x1c00000>;
  91                         };
  92                 };
  93         };
  94
  95         immr@e0000000 {
  96                 #address-cells = <1>;
  97                 #size-cells = <1>;
  98                 device_type = "soc";
  99                 compatible = "simple-bus";
 100                 ranges = <0x0 0xe0000000 0x00100000>;
 101                 reg = <0xe0000000 0x00000200>;
 102                 bus-frequency = <0>;
 103
 104                 wdt@200 {
 105                         device_type = "watchdog";
 106                         compatible = "mpc83xx_wdt";
 107                         reg = <0x200 0x100>;
 108                 };
 109
 110                 gpio1: gpio-controller@c00 {
 111                         #gpio-cells = <2>;
 112                         compatible = "fsl,mpc8379-gpio", "fsl,mpc8349-gpio";
 113                         reg = <0xc00 0x100>;
 114                         interrupts = <74 0x8>;
 115                         interrupt-parent = <&ipic>;
 116                         gpio-controller;
 117                 };
 118
 119                 gpio2: gpio-controller@d00 {
 120                         #gpio-cells = <2>;
 121                         compatible = "fsl,mpc8379-gpio", "fsl,mpc8349-gpio";
 122                         reg = <0xd00 0x100>;
 123                         interrupts = <75 0x8>;
 124                         interrupt-parent = <&ipic>;
 125                         gpio-controller;
 126                 };
 127
 128                 sleep-nexus {
 129                         #address-cells = <1>;
 130                         #size-cells = <1>;
 131                         compatible = "simple-bus";
 132                         sleep = <&pmc 0x0c000000>;
 133                         ranges;
 134
 135                         i2c@3000 {
 136                                 #address-cells = <1>;
 137                                 #size-cells = <0>;
 138                                 cell-index = <0>;
 139                                 compatible = "fsl-i2c";
 140                                 reg = <0x3000 0x100>;
 141                                 interrupts = <14 0x8>;
 142                                 interrupt-parent = <&ipic>;
 143                                 dfsrr;
 144
 145                                 dtt@48 {
 146                                         compatible = "national,lm75";
 147                                         reg = <0x48>;
 148                                 };
 149
 150                                 at24@50 {
 151                                         compatible = "at24,24c256";
 152                                         reg = <0x50>;
 153                                 };
 154
 155                                 rtc@68 {
 156                                         compatible = "dallas,ds1339";
 157                                         reg = <0x68>;
 158                                 };
 159
 160                                 mcu_pio: mcu@a {
 161                                         #gpio-cells = <2>;
 162                                         compatible = "fsl,mc9s08qg8-mpc8379erdb",
 163                                                      "fsl,mcu-mpc8349emitx";
 164                                         reg = <0x0a>;
 165                                         gpio-controller;
 166                                 };
 167                         };
 168
 169                         sdhci@2e000 {
 170                                 compatible = "fsl,mpc8379-esdhc";
 171                                 reg = <0x2e000 0x1000>;
 172                                 interrupts = <42 0x8>;
 173                                 interrupt-parent = <&ipic>;
 174                                 /* Filled in by U-Boot */
 175                                 clock-frequency = <0>;
 176                         };
 177                 };
 178
 179                 i2c@3100 {
 180                         #address-cells = <1>;
 181                         #size-cells = <0>;
 182                         cell-index = <1>;
 183                         compatible = "fsl-i2c";
 184                         reg = <0x3100 0x100>;
 185                         interrupts = <15 0x8>;
 186                         interrupt-parent = <&ipic>;
 187                         dfsrr;
 188                 };
 189
 190                 spi@7000 {
 191                         cell-index = <0>;
 192                         compatible = "fsl,spi";
 193                         reg = <0x7000 0x1000>;
 194                         interrupts = <16 0x8>;
 195                         interrupt-parent = <&ipic>;
 196                         mode = "cpu";
 197                 };
 198
 199                 dma@82a8 {
 200                         #address-cells = <1>;
 201                         #size-cells = <1>;
 202                         compatible = "fsl,mpc8379-dma", "fsl,elo-dma";
 203                         reg = <0x82a8 4>;
 204                         ranges = <0 0x8100 0x1a8>;
 205                         interrupt-parent = <&ipic>;
 206                         interrupts = <71 8>;
 207                         cell-index = <0>;
 208                         dma-channel@0 {
 209                                 compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
 210                                 reg = <0 0x80>;
 211                                 cell-index = <0>;
 212                                 interrupt-parent = <&ipic>;
 213                                 interrupts = <71 8>;
 214                         };
 215                         dma-channel@80 {
 216                                 compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
 217                                 reg = <0x80 0x80>;
 218                                 cell-index = <1>;
 219                                 interrupt-parent = <&ipic>;
 220                                 interrupts = <71 8>;
 221                         };
 222                         dma-channel@100 {
 223                                 compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
 224                                 reg = <0x100 0x80>;
 225                                 cell-index = <2>;
 226                                 interrupt-parent = <&ipic>;
 227                                 interrupts = <71 8>;
 228                         };
 229                         dma-channel@180 {
 230                                 compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
 231                                 reg = <0x180 0x28>;
 232                                 cell-index = <3>;
 233                                 interrupt-parent = <&ipic>;
 234                                 interrupts = <71 8>;
 235                         };
 236                 };
 237
 238                 usb@23000 {
 239                         compatible = "fsl-usb2-dr";
 240                         reg = <0x23000 0x1000>;
 241                         #address-cells = <1>;
 242                         #size-cells = <0>;
 243                         interrupt-parent = <&ipic>;
 244                         interrupts = <38 0x8>;
 245                         phy_type = "ulpi";
 246                         sleep = <&pmc 0x00c00000>;
 247                 };
 248
 249                 enet0: ethernet@24000 {
 250                         #address-cells = <1>;
 251                         #size-cells = <1>;
 252                         cell-index = <0>;
 253                         device_type = "network";
 254                         model = "eTSEC";
 255                         compatible = "gianfar";
 256                         reg = <0x24000 0x1000>;
 257                         ranges = <0x0 0x24000 0x1000>;
 258                         local-mac-address = [ 00 00 00 00 00 00 ];
 259                         interrupts = <32 0x8 33 0x8 34 0x8>;
 260                         phy-connection-type = "mii";
 261                         interrupt-parent = <&ipic>;
 262                         tbi-handle = <&tbi0>;
 263                         phy-handle = <&phy2>;
 264                         sleep = <&pmc 0xc0000000>;
 265                         fsl,magic-packet;
 266
 267                         mdio@520 {
 268                                 #address-cells = <1>;
 269                                 #size-cells = <0>;
 270                                 compatible = "fsl,gianfar-mdio";
 271                                 reg = <0x520 0x20>;
 272
 273                                 phy2: ethernet-phy@2 {
 274                                         interrupt-parent = <&ipic>;
 275                                         interrupts = <17 0x8>;
 276                                         reg = <0x2>;
 277                                         device_type = "ethernet-phy";
 278                                 };
 279
 280                                 tbi0: tbi-phy@11 {
 281                                         reg = <0x11>;
 282                                         device_type = "tbi-phy";
 283                                 };
 284                         };
 285                 };
 286
 287                 enet1: ethernet@25000 {
 288                         #address-cells = <1>;
 289                         #size-cells = <1>;
 290                         cell-index = <1>;
 291                         device_type = "network";
 292                         model = "eTSEC";
 293                         compatible = "gianfar";
 294                         reg = <0x25000 0x1000>;
 295                         ranges = <0x0 0x25000 0x1000>;
 296                         local-mac-address = [ 00 00 00 00 00 00 ];
 297                         interrupts = <35 0x8 36 0x8 37 0x8>;
 298                         phy-connection-type = "mii";
 299                         interrupt-parent = <&ipic>;
 300                         fixed-link = <1 1 1000 0 0>;
 301                         tbi-handle = <&tbi1>;
 302                         sleep = <&pmc 0x30000000>;
 303                         fsl,magic-packet;
 304
 305                         mdio@520 {
 306                                 #address-cells = <1>;
 307                                 #size-cells = <0>;
 308                                 compatible = "fsl,gianfar-tbi";
 309                                 reg = <0x520 0x20>;
 310
 311                                 tbi1: tbi-phy@11 {
 312                                         reg = <0x11>;
 313                                         device_type = "tbi-phy";
 314                                 };
 315                         };
 316                 };
 317
 318                 serial0: serial@4500 {
 319                         cell-index = <0>;
 320                         device_type = "serial";
 321                         compatible = "ns16550";
 322                         reg = <0x4500 0x100>;
 323                         clock-frequency = <0>;
 324                         interrupts = <9 0x8>;
 325                         interrupt-parent = <&ipic>;
 326                 };
 327
 328                 serial1: serial@4600 {
 329                         cell-index = <1>;
 330                         device_type = "serial";
 331                         compatible = "ns16550";
 332                         reg = <0x4600 0x100>;
 333                         clock-frequency = <0>;
 334                         interrupts = <10 0x8>;
 335                         interrupt-parent = <&ipic>;
 336                 };
 337
 338                 crypto@30000 {
 339                         compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
 340                                      "fsl,sec2.1", "fsl,sec2.0";
 341                         reg = <0x30000 0x10000>;
 342                         interrupts = <11 0x8>;
 343                         interrupt-parent = <&ipic>;
 344                         fsl,num-channels = <4>;
 345                         fsl,channel-fifo-len = <24>;
 346                         fsl,exec-units-mask = <0x9fe>;
 347                         fsl,descriptor-types-mask = <0x3ab0ebf>;
 348                         sleep = <&pmc 0x03000000>;
 349                 };
 350
 351                 sata@18000 {
 352                         compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
 353                         reg = <0x18000 0x1000>;
 354                         interrupts = <44 0x8>;
 355                         interrupt-parent = <&ipic>;
 356                         sleep = <&pmc 0x000000c0>;
 357                 };
 358
 359                 sata@19000 {
 360                         compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
 361                         reg = <0x19000 0x1000>;
 362                         interrupts = <45 0x8>;
 363                         interrupt-parent = <&ipic>;
 364                         sleep = <&pmc 0x00000030>;
 365                 };
 366
 367                 sata@1a000 {
 368                         compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
 369                         reg = <0x1a000 0x1000>;
 370                         interrupts = <46 0x8>;
 371                         interrupt-parent = <&ipic>;
 372                         sleep = <&pmc 0x0000000c>;
 373                 };
 374
 375                 sata@1b000 {
 376                         compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
 377                         reg = <0x1b000 0x1000>;
 378                         interrupts = <47 0x8>;
 379                         interrupt-parent = <&ipic>;
 380                         sleep = <&pmc 0x00000003>;
 381                 };
 382
 383                 /* IPIC
 384                  * interrupts cell = <intr #, sense>
 385                  * sense values match linux IORESOURCE_IRQ_* defines:
 386                  * sense == 8: Level, low assertion
 387                  * sense == 2: Edge, high-to-low change
 388                  */
 389                 ipic: interrupt-controller@700 {
 390                         compatible = "fsl,ipic";
 391                         interrupt-controller;
 392                         #address-cells = <0>;
 393                         #interrupt-cells = <2>;
 394                         reg = <0x700 0x100>;
 395                 };
 396
 397                 pmc: power@b00 {
 398                         compatible = "fsl,mpc8379-pmc", "fsl,mpc8349-pmc";
 399                         reg = <0xb00 0x100 0xa00 0x100>;
 400                         interrupts = <80 0x8>;
 401                         interrupt-parent = <&ipic>;
 402                 };
 403         };
 404
 405         pci0: pci@e0008500 {
 406                 interrupt-map-mask = <0xf800 0 0 7>;
 407                 interrupt-map = <
 408                                 /* IRQ5 = 21 = 0x15, IRQ6 = 0x16, IRQ7 = 23 = 0x17 */
 409
 410                                 /* IDSEL AD14 IRQ6 inta */
 411                                  0x7000 0x0 0x0 0x1 &ipic 22 0x8
 412
 413                                 /* IDSEL AD15 IRQ5 inta, IRQ6 intb, IRQ7 intd */
 414                                  0x7800 0x0 0x0 0x1 &ipic 21 0x8
 415                                  0x7800 0x0 0x0 0x2 &ipic 22 0x8
 416                                  0x7800 0x0 0x0 0x4 &ipic 23 0x8
 417
 418                                 /* IDSEL AD28 IRQ7 inta, IRQ5 intb IRQ6 intc*/
 419                                  0xE000 0x0 0x0 0x1 &ipic 23 0x8
 420                                  0xE000 0x0 0x0 0x2 &ipic 21 0x8
 421                                  0xE000 0x0 0x0 0x3 &ipic 22 0x8>;
 422                 interrupt-parent = <&ipic>;
 423                 interrupts = <66 0x8>;
 424                 bus-range = <0x0 0x0>;
 425                 ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
 426                           0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
 427                           0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>;
 428                 sleep = <&pmc 0x00010000>;
 429                 clock-frequency = <66666666>;
 430                 #interrupt-cells = <1>;
 431                 #size-cells = <2>;
 432                 #address-cells = <3>;
 433                 reg = <0xe0008500 0x100         /* internal registers */
 434                        0xe0008300 0x8>;         /* config space access registers */
 435                 compatible = "fsl,mpc8349-pci";
 436                 device_type = "pci";
 437         };
 438 };