arch/powerpc/boot/Makefile

   1 # Makefile for making ELF bootable images for booting on CHRP
   2 # using Open Firmware.
   3 #
   4 # Geert Uytterhoeven    September 1997
   5 #
   6 # Based on coffboot by Paul Mackerras
   7 # Simplified for ppc64 by Todd Inglett
   8 #
   9 # NOTE: this code is built for 32 bit in ELF32 format even though
  10 #       it packages a 64 bit kernel.  We do this to simplify the
  11 #       bootloader and increase compatibility with OpenFirmware.
  12 #
  13 #       To this end we need to define BOOTCC, etc, as the tools
  14 #       needed to build the 32 bit image.  That's normally the same
  15 #       compiler for the rest of the kernel, with the -m32 flag added.
  16 #       To make it easier to setup a cross compiler,
  17 #       CROSS32_COMPILE is setup as a prefix just like CROSS_COMPILE
  18 #       in the toplevel makefile.
  19
  20 all: $(obj)/zImage
  21
  22 BOOTCFLAGS    := -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \
  23                  -fno-strict-aliasing -Os -msoft-float -pipe \
  24                  -fomit-frame-pointer -fno-builtin -fPIC -nostdinc \
  25                  -isystem $(shell $(CROSS32CC) -print-file-name=include)
  26 BOOTAFLAGS      := -D__ASSEMBLY__ $(BOOTCFLAGS) -traditional -nostdinc
  27
  28 ifdef CONFIG_DEBUG_INFO
  29 BOOTCFLAGS      += -g
  30 endif
  31
  32 ifeq ($(call cc-option-yn, -fstack-protector),y)
  33 BOOTCFLAGS      += -fno-stack-protector
  34 endif
  35
  36 BOOTCFLAGS      += -I$(obj) -I$(srctree)/$(obj) -I$(srctree)/$(src)/libfdt
  37
  38 DTS_FLAGS       ?= -p 1024
  39
  40 $(obj)/4xx.o: BOOTCFLAGS += -mcpu=405
  41 $(obj)/ebony.o: BOOTCFLAGS += -mcpu=405
  42 $(obj)/cuboot-taishan.o: BOOTCFLAGS += -mcpu=405
  43 $(obj)/cuboot-katmai.o: BOOTCFLAGS += -mcpu=405
  44 $(obj)/cuboot-acadia.o: BOOTCFLAGS += -mcpu=405
  45 $(obj)/treeboot-walnut.o: BOOTCFLAGS += -mcpu=405
  46 $(obj)/virtex405-head.o: BOOTAFLAGS += -mcpu=405
  47
  48
  49 zlib       := inffast.c inflate.c inftrees.c
  50 zlibheader := inffast.h inffixed.h inflate.h inftrees.h infutil.h
  51 zliblinuxheader := zlib.h zconf.h zutil.h
  52
  53 $(addprefix $(obj)/,$(zlib) cuboot-c2k.o gunzip_util.o main.o prpmc2800.o): \
  54         $(addprefix $(obj)/,$(zliblinuxheader)) $(addprefix $(obj)/,$(zlibheader))
  55
  56 src-libfdt := fdt.c fdt_ro.c fdt_wip.c fdt_sw.c fdt_rw.c fdt_strerror.c
  57 src-wlib := string.S crt0.S crtsavres.S stdio.c main.c \
  58                 $(addprefix libfdt/,$(src-libfdt)) libfdt-wrapper.c \
  59                 ns16550.c serial.c simple_alloc.c div64.S util.S \
  60                 gunzip_util.c elf_util.c $(zlib) devtree.c oflib.c ofconsole.c \
  61                 4xx.c ebony.c mv64x60.c mpsc.c mv64x60_i2c.c cuboot.c bamboo.c \
  62                 cpm-serial.c stdlib.c mpc52xx-psc.c planetcore.c uartlite.c \
  63                 fsl-soc.c mpc8xx.c pq2.c
  64 src-plat := of.c cuboot-52xx.c cuboot-824x.c cuboot-83xx.c cuboot-85xx.c holly.c \
  65                 cuboot-ebony.c treeboot-ebony.c prpmc2800.c \
  66                 ps3-head.S ps3-hvcall.S ps3.c treeboot-bamboo.c cuboot-8xx.c \
  67                 cuboot-pq2.c cuboot-sequoia.c treeboot-walnut.c \
  68                 cuboot-bamboo.c cuboot-mpc7448hpc2.c cuboot-taishan.c \
  69                 fixed-head.S ep88xc.c ep405.c cuboot-c2k.c \
  70                 cuboot-katmai.c cuboot-rainier.c redboot-8xx.c ep8248e.c \
  71                 cuboot-warp.c cuboot-85xx-cpm2.c cuboot-yosemite.c simpleboot.c \
  72                 virtex405-head.S virtex.c redboot-83xx.c cuboot-sam440ep.c \
  73                 cuboot-acadia.c
  74 src-boot := $(src-wlib) $(src-plat) empty.c
  75
  76 src-boot := $(addprefix $(obj)/, $(src-boot))
  77 obj-boot := $(addsuffix .o, $(basename $(src-boot)))
  78 obj-wlib := $(addsuffix .o, $(basename $(addprefix $(obj)/, $(src-wlib))))
  79 obj-plat := $(addsuffix .o, $(basename $(addprefix $(obj)/, $(src-plat))))
  80
  81 quiet_cmd_copy_zlib = COPY    $@
  82       cmd_copy_zlib = sed "s@__used@@;s@<linux/\([^>]*\).*@\"\1\"@" $< > $@
  83
  84 quiet_cmd_copy_zlibheader = COPY    $@
  85       cmd_copy_zlibheader = sed "s@<linux/\([^>]*\).*@\"\1\"@" $< > $@
  86 # stddef.h for NULL
  87 quiet_cmd_copy_zliblinuxheader = COPY    $@
  88       cmd_copy_zliblinuxheader = sed "s@<linux/string.h>@\"string.h\"@;s@<linux/kernel.h>@<stddef.h>@;s@<linux/\([^>]*\).*@\"\1\"@" $< > $@
  89
  90 $(addprefix $(obj)/,$(zlib)): $(obj)/%: $(srctree)/lib/zlib_inflate/%
  91         $(call cmd,copy_zlib)
  92
  93 $(addprefix $(obj)/,$(zlibheader)): $(obj)/%: $(srctree)/lib/zlib_inflate/%
  94         $(call cmd,copy_zlibheader)
  95
  96 $(addprefix $(obj)/,$(zliblinuxheader)): $(obj)/%: $(srctree)/include/linux/%
  97         $(call cmd,copy_zliblinuxheader)
  98
  99 $(obj)/empty.c:
 100         @touch $@
 101
 102 $(obj)/zImage.lds $(obj)/zImage.coff.lds $(obj)/zImage.ps3.lds: $(obj)/%: $(srctree)/$(src)/%.S
 103         @cp $< $@
 104
 105 clean-files := $(zlib) $(zlibheader) $(zliblinuxheader) \
 106                 empty.c zImage.coff.lds zImage.ps3.lds zImage.lds
 107
 108 quiet_cmd_bootcc = BOOTCC  $@
 109       cmd_bootcc = $(CROSS32CC) -Wp,-MD,$(depfile) $(BOOTCFLAGS) -c -o $@ $<
 110
 111 quiet_cmd_bootas = BOOTAS  $@
 112       cmd_bootas = $(CROSS32CC) -Wp,-MD,$(depfile) $(BOOTAFLAGS) -c -o $@ $<
 113
 114 quiet_cmd_bootar = BOOTAR  $@
 115       cmd_bootar = $(CROSS32AR) -cr $@.$$$$ $(filter-out FORCE,$^); mv $@.$$$$ $@
 116
 117 $(patsubst %.c,%.o, $(filter %.c, $(src-boot))): %.o: %.c FORCE
 118         $(Q)mkdir -p $(dir $@)
 119         $(call if_changed_dep,bootcc)
 120 $(patsubst %.S,%.o, $(filter %.S, $(src-boot))): %.o: %.S FORCE
 121         $(Q)mkdir -p $(dir $@)
 122         $(call if_changed_dep,bootas)
 123
 124 $(obj)/wrapper.a: $(obj-wlib) FORCE
 125         $(call if_changed,bootar)
 126
 127 hostprogs-y     := addnote addRamDisk hack-coff mktree dtc
 128
 129 targets         += $(patsubst $(obj)/%,%,$(obj-boot) wrapper.a)
 130 extra-y         := $(obj)/wrapper.a $(obj-plat) $(obj)/empty.o \
 131                    $(obj)/zImage.lds $(obj)/zImage.coff.lds $(obj)/zImage.ps3.lds
 132
 133 dtstree         := $(srctree)/$(src)/dts
 134
 135 wrapper         :=$(srctree)/$(src)/wrapper
 136 wrapperbits     := $(extra-y) $(addprefix $(obj)/,addnote hack-coff mktree dtc) \
 137                         $(wrapper) FORCE
 138
 139 #############
 140 # Bits for building dtc
 141 # DTC_GENPARSER      := 1    # Uncomment to rebuild flex/bison output
 142
 143 dtc-objs := dtc.o flattree.o fstree.o data.o livetree.o treesource.o srcpos.o checks.o
 144 dtc-objs += dtc-lexer.lex.o dtc-parser.tab.o
 145 dtc-objs := $(addprefix dtc-src/, $(dtc-objs))
 146
 147 # prerequisites on generated files needs to be explicit
 148 $(obj)/dtc-src/dtc-parser.tab.o: $(obj)/dtc-src/dtc-parser.tab.c $(obj)/dtc-src/dtc-parser.tab.h
 149 $(obj)/dtc-src/dtc-lexer.lex.o:  $(obj)/dtc-src/dtc-lexer.lex.c $(obj)/dtc-src/dtc-parser.tab.h
 150
 151 HOSTCFLAGS += -I$(src)/dtc-src/ -I$(src)/libfdt/
 152
 153 targets += dtc-src/dtc-parser.tab.c
 154 targets += dtc-src/dtc-lexer.lex.c
 155
 156 clean-files += dtc-src/dtc-parser.tab.h
 157
 158 ifdef DTC_GENPARSER
 159 BISON = bison
 160 FLEX = flex
 161
 162 quiet_cmd_bison = BISON   $@
 163       cmd_bison = $(BISON) -o$@ -d $<; cp $@ $@_shipped
 164 quiet_cmd_flex = FLEX    $@
 165       cmd_flex = $(FLEX) -o$@ $<; cp $@ $@_shipped
 166
 167 $(obj)/dtc-src/dtc-parser.tab.c: $(src)/dtc-src/dtc-parser.y FORCE
 168         $(call if_changed,bison)
 169
 170 $(obj)/dtc-src/dtc-parser.tab.h: $(obj)/dtc-src/dtc-parser.tab.c
 171
 172 $(obj)/dtc-src/dtc-lexer.lex.c: $(src)/dtc-src/dtc-lexer.l FORCE
 173         $(call if_changed,flex)
 174 endif
 175
 176 #############
 177 # Bits for building various flavours of zImage
 178
 179 ifneq ($(CROSS32_COMPILE),)
 180 CROSSWRAP := -C "$(CROSS32_COMPILE)"
 181 else
 182 ifneq ($(CROSS_COMPILE),)
 183 CROSSWRAP := -C "$(CROSS_COMPILE)"
 184 endif
 185 endif
 186
 187 # args (to if_changed): 1 = (this rule), 2 = platform, 3 = dts 4=dtb 5=initrd
 188 quiet_cmd_wrap  = WRAP    $@
 189       cmd_wrap  =$(CONFIG_SHELL) $(wrapper) -c -o $@ -p $2 $(CROSSWRAP) \
 190                 $(if $3, -s $3)$(if $4, -d $4)$(if $5, -i $5) vmlinux
 191
 192 image-$(CONFIG_PPC_PSERIES)             += zImage.pseries
 193 image-$(CONFIG_PPC_MAPLE)               += zImage.pseries
 194 image-$(CONFIG_PPC_IBM_CELL_BLADE)      += zImage.pseries
 195 image-$(CONFIG_PPC_PS3)                 += dtbImage.ps3
 196 image-$(CONFIG_PPC_CELLEB)              += zImage.pseries
 197 image-$(CONFIG_PPC_CELL_QPACE)          += zImage.pseries
 198 image-$(CONFIG_PPC_CHRP)                += zImage.chrp
 199 image-$(CONFIG_PPC_EFIKA)               += zImage.chrp
 200 image-$(CONFIG_PPC_PMAC)                += zImage.pmac
 201 image-$(CONFIG_PPC_HOLLY)               += dtbImage.holly
 202 image-$(CONFIG_PPC_PRPMC2800)           += dtbImage.prpmc2800
 203 image-$(CONFIG_PPC_ISERIES)             += zImage.iseries
 204 image-$(CONFIG_DEFAULT_UIMAGE)          += uImage
 205
 206 #
 207 # Targets which embed a device tree blob
 208 #
 209 # Theses are default targets to build images which embed device tree blobs.
 210 # They are only required on boards which do not have FDT support in firmware.
 211 # Boards with newish u-boot firmare can use the uImage target above
 212 #
 213
 214 # Board ports in arch/powerpc/platform/40x/Kconfig
 215 image-$(CONFIG_EP405)                   += dtbImage.ep405
 216 image-$(CONFIG_WALNUT)                  += treeImage.walnut
 217 image-$(CONFIG_ACADIA)                  += cuImage.acadia
 218
 219 # Board ports in arch/powerpc/platform/44x/Kconfig
 220 image-$(CONFIG_EBONY)                   += treeImage.ebony cuImage.ebony
 221 image-$(CONFIG_BAMBOO)                  += treeImage.bamboo cuImage.bamboo
 222 image-$(CONFIG_SAM440EP)                += cuImage.sam440ep
 223 image-$(CONFIG_SEQUOIA)                 += cuImage.sequoia
 224 image-$(CONFIG_RAINIER)                 += cuImage.rainier
 225 image-$(CONFIG_TAISHAN)                 += cuImage.taishan
 226 image-$(CONFIG_KATMAI)                  += cuImage.katmai
 227 image-$(CONFIG_WARP)                    += cuImage.warp
 228 image-$(CONFIG_YOSEMITE)                += cuImage.yosemite
 229
 230 # Board ports in arch/powerpc/platform/8xx/Kconfig
 231 image-$(CONFIG_MPC86XADS)               += cuImage.mpc866ads
 232 image-$(CONFIG_MPC885ADS)               += cuImage.mpc885ads
 233 image-$(CONFIG_PPC_EP88XC)              += dtbImage.ep88xc
 234 image-$(CONFIG_PPC_ADDER875)            += cuImage.adder875-uboot \
 235                                            dtbImage.adder875-redboot
 236
 237 # Board ports in arch/powerpc/platform/52xx/Kconfig
 238 image-$(CONFIG_PPC_LITE5200)            += cuImage.lite5200 cuImage.lite5200b
 239
 240 # Board ports in arch/powerpc/platform/82xx/Kconfig
 241 image-$(CONFIG_MPC8272_ADS)             += cuImage.mpc8272ads
 242 image-$(CONFIG_PQ2FADS)                 += cuImage.pq2fads
 243 image-$(CONFIG_EP8248E)                 += dtbImage.ep8248e
 244
 245 # Board ports in arch/powerpc/platform/83xx/Kconfig
 246 image-$(CONFIG_MPC832x_MDS)             += cuImage.mpc832x_mds
 247 image-$(CONFIG_MPC832x_RDB)             += cuImage.mpc832x_rdb
 248 image-$(CONFIG_MPC834x_ITX)             += cuImage.mpc8349emitx \
 249                                            cuImage.mpc8349emitxgp
 250 image-$(CONFIG_MPC834x_MDS)             += cuImage.mpc834x_mds
 251 image-$(CONFIG_MPC836x_MDS)             += cuImage.mpc836x_mds
 252 image-$(CONFIG_ASP834x)                 += dtbImage.asp834x-redboot
 253
 254 # Board ports in arch/powerpc/platform/85xx/Kconfig
 255 image-$(CONFIG_MPC8540_ADS)             += cuImage.mpc8540ads
 256 image-$(CONFIG_MPC8560_ADS)             += cuImage.mpc8560ads
 257 image-$(CONFIG_MPC85xx_CDS)             += cuImage.mpc8541cds \
 258                                            cuImage.mpc8548cds \
 259                                            cuImage.mpc8555cds
 260 image-$(CONFIG_MPC85xx_MDS)             += cuImage.mpc8568mds
 261 image-$(CONFIG_MPC85xx_DS)              += cuImage.mpc8544ds \
 262                                            cuImage.mpc8572ds
 263 image-$(CONFIG_TQM8540)                 += cuImage.tqm8540
 264 image-$(CONFIG_TQM8541)                 += cuImage.tqm8541
 265 image-$(CONFIG_TQM8548)                 += cuImage.tqm8548
 266 image-$(CONFIG_TQM8555)                 += cuImage.tqm8555
 267 image-$(CONFIG_TQM8560)                 += cuImage.tqm8560
 268 image-$(CONFIG_SBC8548)                 += cuImage.sbc8548
 269 image-$(CONFIG_SBC8560)                 += cuImage.sbc8560
 270 image-$(CONFIG_KSI8560)                 += cuImage.ksi8560
 271
 272 # Board ports in arch/powerpc/platform/embedded6xx/Kconfig
 273 image-$(CONFIG_STORCENTER)              += cuImage.storcenter
 274 image-$(CONFIG_MPC7448HPC2)             += cuImage.mpc7448hpc2
 275 image-$(CONFIG_PPC_C2K)                 += cuImage.c2k
 276
 277 # For 32-bit powermacs, build the COFF and miboot images
 278 # as well as the ELF images.
 279 ifeq ($(CONFIG_PPC32),y)
 280 image-$(CONFIG_PPC_PMAC)        += zImage.coff zImage.miboot
 281 endif
 282
 283 # Allow extra targets to be added to the defconfig
 284 image-y += $(subst ",,$(CONFIG_EXTRA_TARGETS))
 285
 286 initrd-  := $(patsubst zImage%, zImage.initrd%, $(image-n) $(image-))
 287 initrd-y := $(patsubst zImage%, zImage.initrd%, \
 288                 $(patsubst dtbImage%, dtbImage.initrd%, \
 289                 $(patsubst simpleImage%, simpleImage.initrd%, \
 290                 $(patsubst treeImage%, treeImage.initrd%, $(image-y)))))
 291 initrd-y := $(filter-out $(image-y), $(initrd-y))
 292 targets += $(image-y) $(initrd-y)
 293
 294 $(addprefix $(obj)/, $(initrd-y)): $(obj)/ramdisk.image.gz
 295
 296 # Don't put the ramdisk on the pattern rule; when its missing make will try
 297 # the pattern rule with less dependencies that also matches (even with the
 298 # hard dependency listed).
 299 $(obj)/zImage.initrd.%: vmlinux $(wrapperbits)
 300         $(call if_changed,wrap,$*,,,$(obj)/ramdisk.image.gz)
 301
 302 $(obj)/zImage.%: vmlinux $(wrapperbits)
 303         $(call if_changed,wrap,$*)
 304
 305 # dtbImage% - a dtbImage is a zImage with an embedded device tree blob
 306 $(obj)/dtbImage.initrd.%: vmlinux $(wrapperbits) $(obj)/%.dtb
 307         $(call if_changed,wrap,$*,,$(obj)/$*.dtb,$(obj)/ramdisk.image.gz)
 308
 309 $(obj)/dtbImage.%: vmlinux $(wrapperbits) $(obj)/%.dtb
 310         $(call if_changed,wrap,$*,,$(obj)/$*.dtb)
 311
 312 # This cannot be in the root of $(src) as the zImage rule always adds a $(obj)
 313 # prefix
 314 $(obj)/vmlinux.strip: vmlinux
 315         $(STRIP) -s -R .comment $< -o $@
 316
 317 # The iseries hypervisor won't take an ET_DYN executable, so this
 318 # changes the type (byte 17) in the file to ET_EXEC (2).
 319 $(obj)/zImage.iseries: vmlinux
 320         $(STRIP) -s -R .comment $< -o $@
 321         printf "\x02" | dd of=$@ conv=notrunc bs=1 seek=17
 322
 323 $(obj)/uImage: vmlinux $(wrapperbits)
 324         $(call if_changed,wrap,uboot)
 325
 326 $(obj)/cuImage.initrd.%: vmlinux $(obj)/%.dtb $(wrapperbits)
 327         $(call if_changed,wrap,cuboot-$*,,$(obj)/$*.dtb,$(obj)/ramdisk.image.gz)
 328
 329 $(obj)/cuImage.%: vmlinux $(obj)/%.dtb $(wrapperbits)
 330         $(call if_changed,wrap,cuboot-$*,,$(obj)/$*.dtb)
 331
 332 $(obj)/simpleImage.initrd.%: vmlinux $(obj)/%.dtb $(wrapperbits)
 333         $(call if_changed,wrap,simpleboot-$*,,$(obj)/$*.dtb,$(obj)/ramdisk.image.gz)
 334
 335 $(obj)/simpleImage.%: vmlinux $(obj)/%.dtb $(wrapperbits)
 336         $(call if_changed,wrap,simpleboot-$*,,$(obj)/$*.dtb)
 337
 338 $(obj)/treeImage.initrd.%: vmlinux $(obj)/%.dtb $(wrapperbits)
 339         $(call if_changed,wrap,treeboot-$*,,$(obj)/$*.dtb,$(obj)/ramdisk.image.gz)
 340
 341 $(obj)/treeImage.%: vmlinux $(obj)/%.dtb $(wrapperbits)
 342         $(call if_changed,wrap,treeboot-$*,,$(obj)/$*.dtb)
 343
 344 # Rule to build device tree blobs
 345 $(obj)/%.dtb: $(dtstree)/%.dts $(obj)/dtc
 346         $(obj)/dtc -O dtb -o $(obj)/$*.dtb -b 0 $(DTS_FLAGS) $(dtstree)/$*.dts
 347
 348 # If there isn't a platform selected then just strip the vmlinux.
 349 ifeq (,$(image-y))
 350 image-y := vmlinux.strip
 351 endif
 352
 353 $(obj)/zImage:          $(addprefix $(obj)/, $(image-y))
 354         @rm -f $@; ln $< $@
 355 $(obj)/zImage.initrd:   $(addprefix $(obj)/, $(initrd-y))
 356         @rm -f $@; ln $< $@
 357
 358 install: $(CONFIGURE) $(addprefix $(obj)/, $(image-y))
 359         sh -x $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" vmlinux System.map "$(INSTALL_PATH)" $<
 360
 361 # anything not in $(targets)
 362 clean-files += $(image-) $(initrd-) cuImage.* dtbImage.* treeImage.* \
 363         zImage zImage.initrd zImage.chrp zImage.coff zImage.holly \
 364         zImage.iseries zImage.miboot zImage.pmac zImage.pseries \
 365         otheros.bld *.dtb
 366
 367 # clean up files cached by wrapper
 368 clean-kernel := vmlinux.strip vmlinux.bin
 369 clean-kernel += $(addsuffix .gz,$(clean-kernel))
 370 # If not absolute clean-files are relative to $(obj).
 371 clean-files += $(addprefix $(objtree)/, $(clean-kernel))
 372
 373 WRAPPER_OBJDIR := /usr/lib/kernel-wrapper
 374 WRAPPER_DTSDIR := /usr/lib/kernel-wrapper/dts
 375 WRAPPER_BINDIR := /usr/sbin
 376 INSTALL := install
 377
 378 extra-installed         := $(patsubst $(obj)/%, $(DESTDIR)$(WRAPPER_OBJDIR)/%, $(extra-y))
 379 hostprogs-installed     := $(patsubst %, $(DESTDIR)$(WRAPPER_BINDIR)/%, $(hostprogs-y))
 380 wrapper-installed       := $(DESTDIR)$(WRAPPER_BINDIR)/wrapper
 381 dts-installed           := $(patsubst $(obj)/dts/%, $(DESTDIR)$(WRAPPER_DTSDIR)/%, $(wildcard $(obj)/dts/*.dts))
 382
 383 all-installed           := $(extra-installed) $(hostprogs-installed) $(wrapper-installed) $(dts-installed)
 384
 385 quiet_cmd_mkdir           = MKDIR   $(patsubst $(INSTALL_HDR_PATH)/%,%,$@)
 386       cmd_mkdir           = mkdir -p $@
 387
 388 quiet_cmd_install         = INSTALL $(patsubst $(DESTDIR)$(WRAPPER_OBJDIR)/%,%,$@)
 389       cmd_install         = $(INSTALL)  -m0644 $(patsubst $(DESTDIR)$(WRAPPER_OBJDIR)/%,$(obj)/%,$@) $@
 390
 391 quiet_cmd_install_dts     = INSTALL $(patsubst $(DESTDIR)$(WRAPPER_DTSDIR)/%,dts/%,$@)
 392       cmd_install_dts     = $(INSTALL)  -m0644 $(patsubst $(DESTDIR)$(WRAPPER_DTSDIR)/%,$(srctree)/$(obj)/dts/%,$@) $@
 393
 394 quiet_cmd_install_exe     = INSTALL $(patsubst $(DESTDIR)$(WRAPPER_BINDIR)/%,%,$@)
 395       cmd_install_exe     = $(INSTALL)  -m0755 $(patsubst $(DESTDIR)$(WRAPPER_BINDIR)/%,$(obj)/%,$@) $@
 396
 397 quiet_cmd_install_wrapper = INSTALL $(patsubst $(DESTDIR)$(WRAPPER_BINDIR)/%,%,$@)
 398       cmd_install_wrapper = $(INSTALL)  -m0755 $(patsubst $(DESTDIR)$(WRAPPER_BINDIR)/%,$(srctree)/$(obj)/%,$@) $@ ;\
 399                                 sed -i $@ -e 's%^object=.*%object=$(WRAPPER_OBJDIR)%' \
 400                                           -e 's%^objbin=.*%objbin=$(WRAPPER_BINDIR)%' \
 401
 402
 403 $(DESTDIR)$(WRAPPER_OBJDIR) $(DESTDIR)$(WRAPPER_DTSDIR) $(DESTDIR)$(WRAPPER_BINDIR):
 404         $(call cmd,mkdir)
 405
 406 $(extra-installed)      : $(DESTDIR)$(WRAPPER_OBJDIR)/% : $(obj)/% | $(DESTDIR)$(WRAPPER_OBJDIR)
 407         $(call cmd,install)
 408
 409 $(hostprogs-installed)  : $(DESTDIR)$(WRAPPER_BINDIR)/% : $(obj)/% | $(DESTDIR)$(WRAPPER_BINDIR)
 410         $(call cmd,install_exe)
 411
 412 $(dts-installed)        : $(DESTDIR)$(WRAPPER_DTSDIR)/% : $(srctree)/$(obj)/dts/% | $(DESTDIR)$(WRAPPER_DTSDIR)
 413         $(call cmd,install_dts)
 414
 415 $(wrapper-installed): $(DESTDIR)$(WRAPPER_BINDIR) $(srctree)/$(obj)/wrapper | $(DESTDIR)$(WRAPPER_BINDIR)
 416         $(call cmd,install_wrapper)
 417
 418 $(obj)/bootwrapper_install: $(all-installed)
 419