arch/mn10300/unit-asb2364/include/unit/serial.h

   1 /* Unit-specific 8250 serial ports
   2  *
   3  * Copyright (C) 2005 Red Hat, Inc. All Rights Reserved.
   4  * Written by David Howells (dhowells@redhat.com)
   5  *
   6  * This program is free software; you can redistribute it and/or
   7  * modify it under the terms of the GNU General Public License
   8  * as published by the Free Software Foundation; either version
   9  * 2 of the License, or (at your option) any later version.
  10  */
  11
  12 #ifndef _ASM_UNIT_SERIAL_H
  13 #define _ASM_UNIT_SERIAL_H
  14
  15 #include <asm/cpu-regs.h>
  16 #include <proc/irq.h>
  17 #include <unit/fpga-regs.h>
  18 #include <linux/serial_reg.h>
  19
  20 #define SERIAL_PORT0_BASE_ADDRESS       0xA8200000
  21
  22 #define SERIAL_IRQ      XIRQ1   /* single serial (TL16C550C)    (Lo) */
  23
  24 /*
  25  * The ASB2364 has an 12.288 MHz clock
  26  * for your UART.
  27  *
  28  * It'd be nice if someone built a serial card with a 24.576 MHz
  29  * clock, since the 16550A is capable of handling a top speed of 1.5
  30  * megabits/second; but this requires the faster clock.
  31  */
  32 #define BASE_BAUD (12288000 / 16)
  33
  34 /*
  35  * dispose of the /dev/ttyS0 and /dev/ttyS1 serial ports
  36  */
  37 #ifndef CONFIG_GDBSTUB_ON_TTYSx
  38
  39 #define SERIAL_PORT_DFNS                                                \
  40         {                                                               \
  41                 .baud_base      = BASE_BAUD,                            \
  42                 .irq            = SERIAL_IRQ,                           \
  43                 .flags          = STD_COM_FLAGS,                        \
  44                 .iomem_base     = (u8 *) SERIAL_PORT0_BASE_ADDRESS,     \
  45                 .iomem_reg_shift = 1,                                   \
  46                 .io_type        = SERIAL_IO_MEM,                        \
  47         },
  48
  49 #ifndef __ASSEMBLY__
  50
  51 static inline void __debug_to_serial(const char *p, int n)
  52 {
  53 }
  54
  55 #endif /* !__ASSEMBLY__ */
  56
  57 #else /* CONFIG_GDBSTUB_ON_TTYSx */
  58
  59 #define SERIAL_PORT_DFNS /* stolen by gdb-stub */
  60
  61 #if defined(CONFIG_GDBSTUB_ON_TTYS0)
  62 #define GDBPORT_SERIAL_RX       __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_RX  * 4, u8)
  63 #define GDBPORT_SERIAL_TX       __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_TX  * 4, u8)
  64 #define GDBPORT_SERIAL_DLL      __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_DLL * 4, u8)
  65 #define GDBPORT_SERIAL_DLM      __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_DLM * 4, u8)
  66 #define GDBPORT_SERIAL_IER      __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_IER * 4, u8)
  67 #define GDBPORT_SERIAL_IIR      __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_IIR * 4, u8)
  68 #define GDBPORT_SERIAL_FCR      __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_FCR * 4, u8)
  69 #define GDBPORT_SERIAL_LCR      __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LCR * 4, u8)
  70 #define GDBPORT_SERIAL_MCR      __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MCR * 4, u8)
  71 #define GDBPORT_SERIAL_LSR      __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LSR * 4, u8)
  72 #define GDBPORT_SERIAL_MSR      __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MSR * 4, u8)
  73 #define GDBPORT_SERIAL_SCR      __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_SCR * 4, u8)
  74 #define GDBPORT_SERIAL_IRQ      SERIAL_IRQ
  75
  76 #elif defined(CONFIG_GDBSTUB_ON_TTYS1)
  77 #error The ASB2364 does not have a /dev/ttyS1
  78 #endif
  79
  80 #ifndef __ASSEMBLY__
  81
  82 static inline void __debug_to_serial(const char *p, int n)
  83 {
  84         char ch;
  85
  86 #define LSR_WAIT_FOR(STATE)     \
  87         do {} while (!(GDBPORT_SERIAL_LSR & UART_LSR_##STATE))
  88 #define FLOWCTL_QUERY(LINE)     \
  89         ({ GDBPORT_SERIAL_MSR & UART_MSR_##LINE; })
  90 #define FLOWCTL_WAIT_FOR(LINE)  \
  91         do {} while (!(GDBPORT_SERIAL_MSR & UART_MSR_##LINE))
  92 #define FLOWCTL_CLEAR(LINE)     \
  93         do { GDBPORT_SERIAL_MCR &= ~UART_MCR_##LINE; } while (0)
  94 #define FLOWCTL_SET(LINE)       \
  95         do { GDBPORT_SERIAL_MCR |= UART_MCR_##LINE; } while (0)
  96
  97         FLOWCTL_SET(DTR);
  98
  99         for (; n > 0; n--) {
 100                 LSR_WAIT_FOR(THRE);
 101                 FLOWCTL_WAIT_FOR(CTS);
 102
 103                 ch = *p++;
 104                 if (ch == 0x0a) {
 105                         GDBPORT_SERIAL_TX = 0x0d;
 106                         LSR_WAIT_FOR(THRE);
 107                         FLOWCTL_WAIT_FOR(CTS);
 108                 }
 109                 GDBPORT_SERIAL_TX = ch;
 110         }
 111
 112         FLOWCTL_CLEAR(DTR);
 113 }
 114
 115 #endif /* !__ASSEMBLY__ */
 116
 117 #endif /* CONFIG_GDBSTUB_ON_TTYSx */
 118
 119 #define SERIAL_INITIALIZE                                       \
 120 do {                                                            \
 121         /* release reset */                                     \
 122         ASB2364_FPGA_REG_RESET_UART = 0x0001;                   \
 123         SyncExBus();                                            \
 124 } while (0)
 125
 126 #define SERIAL_CHECK_INTERRUPT                                  \
 127 do {                                                            \
 128         if ((ASB2364_FPGA_REG_IRQ_UART & 0x0001) == 0x0001) {   \
 129                 return IRQ_NONE;                                \
 130         }                                                       \
 131 } while (0)
 132
 133 #define SERIAL_CLEAR_INTERRUPT                                  \
 134 do {                                                            \
 135         ASB2364_FPGA_REG_IRQ_UART = 0x0001;                     \
 136         SyncExBus();                                            \
 137 } while (0)
 138
 139 #define SERIAL_SET_INT_MASK                                     \
 140 do {                                                            \
 141         ASB2364_FPGA_REG_MASK_UART = 0x0001;                    \
 142         SyncExBus();                                            \
 143 } while (0)
 144
 145 #define SERIAL_CLEAR_INT_MASK                                   \
 146 do {                                                            \
 147         ASB2364_FPGA_REG_MASK_UART = 0x0000;                    \
 148         SyncExBus();                                            \
 149 } while (0)
 150
 151 #endif /* _ASM_UNIT_SERIAL_H */