arch/mips/kernel/cpu-probe.c

   1 /*
   2  * Processor capabilities determination functions.
   3  *
   4  * Copyright (C) xxxx  the Anonymous
   5  * Copyright (C) 1994 - 2006 Ralf Baechle
   6  * Copyright (C) 2003, 2004  Maciej W. Rozycki
   7  * Copyright (C) 2001, 2004  MIPS Inc.
   8  *
   9  * This program is free software; you can redistribute it and/or
  10  * modify it under the terms of the GNU General Public License
  11  * as published by the Free Software Foundation; either version
  12  * 2 of the License, or (at your option) any later version.
  13  */
  14 #include <linux/init.h>
  15 #include <linux/kernel.h>
  16 #include <linux/ptrace.h>
  17 #include <linux/stddef.h>
  18
  19 #include <asm/bugs.h>
  20 #include <asm/cpu.h>
  21 #include <asm/fpu.h>
  22 #include <asm/mipsregs.h>
  23 #include <asm/system.h>
  24 #include <asm/watch.h>
  25
  26 /*
  27  * Not all of the MIPS CPUs have the "wait" instruction available. Moreover,
  28  * the implementation of the "wait" feature differs between CPU families. This
  29  * points to the function that implements CPU specific wait.
  30  * The wait instruction stops the pipeline and reduces the power consumption of
  31  * the CPU very much.
  32  */
  33 void (*cpu_wait)(void) = NULL;
  34
  35 static void r3081_wait(void)
  36 {
  37         unsigned long cfg = read_c0_conf();
  38         write_c0_conf(cfg | R30XX_CONF_HALT);
  39 }
  40
  41 static void r39xx_wait(void)
  42 {
  43         local_irq_disable();
  44         if (!need_resched())
  45                 write_c0_conf(read_c0_conf() | TX39_CONF_HALT);
  46         local_irq_enable();
  47 }
  48
  49 extern void r4k_wait(void);
  50
  51 /*
  52  * This variant is preferable as it allows testing need_resched and going to
  53  * sleep depending on the outcome atomically.  Unfortunately the "It is
  54  * implementation-dependent whether the pipeline restarts when a non-enabled
  55  * interrupt is requested" restriction in the MIPS32/MIPS64 architecture makes
  56  * using this version a gamble.
  57  */
  58 void r4k_wait_irqoff(void)
  59 {
  60         local_irq_disable();
  61         if (!need_resched())
  62                 __asm__("       .set    push            \n"
  63                         "       .set    mips3           \n"
  64                         "       wait                    \n"
  65                         "       .set    pop             \n");
  66         local_irq_enable();
  67         __asm__("       .globl __pastwait       \n"
  68                 "__pastwait:                    \n");
  69         return;
  70 }
  71
  72 /*
  73  * The RM7000 variant has to handle erratum 38.  The workaround is to not
  74  * have any pending stores when the WAIT instruction is executed.
  75  */
  76 static void rm7k_wait_irqoff(void)
  77 {
  78         local_irq_disable();
  79         if (!need_resched())
  80                 __asm__(
  81                 "       .set    push                                    \n"
  82                 "       .set    mips3                                   \n"
  83                 "       .set    noat                                    \n"
  84                 "       mfc0    $1, $12                                 \n"
  85                 "       sync                                            \n"
  86                 "       mtc0    $1, $12         # stalls until W stage  \n"
  87                 "       wait                                            \n"
  88                 "       mtc0    $1, $12         # stalls until W stage  \n"
  89                 "       .set    pop                                     \n");
  90         local_irq_enable();
  91 }
  92
  93 /* The Au1xxx wait is available only if using 32khz counter or
  94  * external timer source, but specifically not CP0 Counter. */
  95 int allow_au1k_wait;
  96
  97 static void au1k_wait(void)
  98 {
  99         if (!allow_au1k_wait)
 100                 return;
 101
 102         /* using the wait instruction makes CP0 counter unusable */
 103         __asm__("       .set    mips3                   \n"
 104                 "       cache   0x14, 0(%0)             \n"
 105                 "       cache   0x14, 32(%0)            \n"
 106                 "       sync                            \n"
 107                 "       nop                             \n"
 108                 "       wait                            \n"
 109                 "       nop                             \n"
 110                 "       nop                             \n"
 111                 "       nop                             \n"
 112                 "       nop                             \n"
 113                 "       .set    mips0                   \n"
 114                 : : "r" (au1k_wait));
 115 }
 116
 117 static int __initdata nowait = 0;
 118
 119 static int __init wait_disable(char *s)
 120 {
 121         nowait = 1;
 122
 123         return 1;
 124 }
 125
 126 __setup("nowait", wait_disable);
 127
 128 void __init check_wait(void)
 129 {
 130         struct cpuinfo_mips *c = &current_cpu_data;
 131
 132         if (nowait) {
 133                 printk("Wait instruction disabled.\n");
 134                 return;
 135         }
 136
 137         switch (c->cputype) {
 138         case CPU_R3081:
 139         case CPU_R3081E:
 140                 cpu_wait = r3081_wait;
 141                 break;
 142         case CPU_TX3927:
 143                 cpu_wait = r39xx_wait;
 144                 break;
 145         case CPU_R4200:
 146 /*      case CPU_R4300: */
 147         case CPU_R4600:
 148         case CPU_R4640:
 149         case CPU_R4650:
 150         case CPU_R4700:
 151         case CPU_R5000:
 152         case CPU_R5500:
 153         case CPU_NEVADA:
 154         case CPU_4KC:
 155         case CPU_4KEC:
 156         case CPU_4KSC:
 157         case CPU_5KC:
 158         case CPU_25KF:
 159         case CPU_PR4450:
 160         case CPU_BCM3302:
 161         case CPU_CAVIUM_OCTEON:
 162                 cpu_wait = r4k_wait;
 163                 break;
 164
 165         case CPU_RM7000:
 166                 cpu_wait = rm7k_wait_irqoff;
 167                 break;
 168
 169         case CPU_24K:
 170         case CPU_34K:
 171         case CPU_1004K:
 172                 cpu_wait = r4k_wait;
 173                 if (read_c0_config7() & MIPS_CONF7_WII)
 174                         cpu_wait = r4k_wait_irqoff;
 175                 break;
 176
 177         case CPU_74K:
 178                 cpu_wait = r4k_wait;
 179                 if ((c->processor_id & 0xff) >= PRID_REV_ENCODE_332(2, 1, 0))
 180                         cpu_wait = r4k_wait_irqoff;
 181                 break;
 182
 183         case CPU_TX49XX:
 184                 cpu_wait = r4k_wait_irqoff;
 185                 break;
 186         case CPU_ALCHEMY:
 187                 cpu_wait = au1k_wait;
 188                 break;
 189         case CPU_20KC:
 190                 /*
 191                  * WAIT on Rev1.0 has E1, E2, E3 and E16.
 192                  * WAIT on Rev2.0 and Rev3.0 has E16.
 193                  * Rev3.1 WAIT is nop, why bother
 194                  */
 195                 if ((c->processor_id & 0xff) <= 0x64)
 196                         break;
 197
 198                 /*
 199                  * Another rev is incremeting c0_count at a reduced clock
 200                  * rate while in WAIT mode.  So we basically have the choice
 201                  * between using the cp0 timer as clocksource or avoiding
 202                  * the WAIT instruction.  Until more details are known,
 203                  * disable the use of WAIT for 20Kc entirely.
 204                    cpu_wait = r4k_wait;
 205                  */
 206                 break;
 207         case CPU_RM9000:
 208                 if ((c->processor_id & 0x00ff) >= 0x40)
 209                         cpu_wait = r4k_wait;
 210                 break;
 211         default:
 212                 break;
 213         }
 214 }
 215
 216 static inline void check_errata(void)
 217 {
 218         struct cpuinfo_mips *c = &current_cpu_data;
 219
 220         switch (c->cputype) {
 221         case CPU_34K:
 222                 /*
 223                  * Erratum "RPS May Cause Incorrect Instruction Execution"
 224                  * This code only handles VPE0, any SMP/SMTC/RTOS code
 225                  * making use of VPE1 will be responsable for that VPE.
 226                  */
 227                 if ((c->processor_id & PRID_REV_MASK) <= PRID_REV_34K_V1_0_2)
 228                         write_c0_config7(read_c0_config7() | MIPS_CONF7_RPS);
 229                 break;
 230         default:
 231                 break;
 232         }
 233 }
 234
 235 void __init check_bugs32(void)
 236 {
 237         check_errata();
 238 }
 239
 240 /*
 241  * Probe whether cpu has config register by trying to play with
 242  * alternate cache bit and see whether it matters.
 243  * It's used by cpu_probe to distinguish between R3000A and R3081.
 244  */
 245 static inline int cpu_has_confreg(void)
 246 {
 247 #ifdef CONFIG_CPU_R3000
 248         extern unsigned long r3k_cache_size(unsigned long);
 249         unsigned long size1, size2;
 250         unsigned long cfg = read_c0_conf();
 251
 252         size1 = r3k_cache_size(ST0_ISC);
 253         write_c0_conf(cfg ^ R30XX_CONF_AC);
 254         size2 = r3k_cache_size(ST0_ISC);
 255         write_c0_conf(cfg);
 256         return size1 != size2;
 257 #else
 258         return 0;
 259 #endif
 260 }
 261
 262 /*
 263  * Get the FPU Implementation/Revision.
 264  */
 265 static inline unsigned long cpu_get_fpu_id(void)
 266 {
 267         unsigned long tmp, fpu_id;
 268
 269         tmp = read_c0_status();
 270         __enable_fpu();
 271         fpu_id = read_32bit_cp1_register(CP1_REVISION);
 272         write_c0_status(tmp);
 273         return fpu_id;
 274 }
 275
 276 /*
 277  * Check the CPU has an FPU the official way.
 278  */
 279 static inline int __cpu_has_fpu(void)
 280 {
 281         return ((cpu_get_fpu_id() & 0xff00) != FPIR_IMP_NONE);
 282 }
 283
 284 #define R4K_OPTS (MIPS_CPU_TLB | MIPS_CPU_4KEX | MIPS_CPU_4K_CACHE \
 285                 | MIPS_CPU_COUNTER)
 286
 287 static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu)
 288 {
 289         switch (c->processor_id & 0xff00) {
 290         case PRID_IMP_R2000:
 291                 c->cputype = CPU_R2000;
 292                 __cpu_name[cpu] = "R2000";
 293                 c->isa_level = MIPS_CPU_ISA_I;
 294                 c->options = MIPS_CPU_TLB | MIPS_CPU_3K_CACHE |
 295                              MIPS_CPU_NOFPUEX;
 296                 if (__cpu_has_fpu())
 297                         c->options |= MIPS_CPU_FPU;
 298                 c->tlbsize = 64;
 299                 break;
 300         case PRID_IMP_R3000:
 301                 if ((c->processor_id & 0xff) == PRID_REV_R3000A) {
 302                         if (cpu_has_confreg()) {
 303                                 c->cputype = CPU_R3081E;
 304                                 __cpu_name[cpu] = "R3081";
 305                         } else {
 306                                 c->cputype = CPU_R3000A;
 307                                 __cpu_name[cpu] = "R3000A";
 308                         }
 309                         break;
 310                 } else {
 311                         c->cputype = CPU_R3000;
 312                         __cpu_name[cpu] = "R3000";
 313                 }
 314                 c->isa_level = MIPS_CPU_ISA_I;
 315                 c->options = MIPS_CPU_TLB | MIPS_CPU_3K_CACHE |
 316                              MIPS_CPU_NOFPUEX;
 317                 if (__cpu_has_fpu())
 318                         c->options |= MIPS_CPU_FPU;
 319                 c->tlbsize = 64;
 320                 break;
 321         case PRID_IMP_R4000:
 322                 if (read_c0_config() & CONF_SC) {
 323                         if ((c->processor_id & 0xff) >= PRID_REV_R4400) {
 324                                 c->cputype = CPU_R4400PC;
 325                                 __cpu_name[cpu] = "R4400PC";
 326                         } else {
 327                                 c->cputype = CPU_R4000PC;
 328                                 __cpu_name[cpu] = "R4000PC";
 329                         }
 330                 } else {
 331                         if ((c->processor_id & 0xff) >= PRID_REV_R4400) {
 332                                 c->cputype = CPU_R4400SC;
 333                                 __cpu_name[cpu] = "R4400SC";
 334                         } else {
 335                                 c->cputype = CPU_R4000SC;
 336                                 __cpu_name[cpu] = "R4000SC";
 337                         }
 338                 }
 339
 340                 c->isa_level = MIPS_CPU_ISA_III;
 341                 c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR |
 342                              MIPS_CPU_WATCH | MIPS_CPU_VCE |
 343                              MIPS_CPU_LLSC;
 344                 c->tlbsize = 48;
 345                 break;
 346         case PRID_IMP_VR41XX:
 347                 switch (c->processor_id & 0xf0) {
 348                 case PRID_REV_VR4111:
 349                         c->cputype = CPU_VR4111;
 350                         __cpu_name[cpu] = "NEC VR4111";
 351                         break;
 352                 case PRID_REV_VR4121:
 353                         c->cputype = CPU_VR4121;
 354                         __cpu_name[cpu] = "NEC VR4121";
 355                         break;
 356                 case PRID_REV_VR4122:
 357                         if ((c->processor_id & 0xf) < 0x3) {
 358                                 c->cputype = CPU_VR4122;
 359                                 __cpu_name[cpu] = "NEC VR4122";
 360                         } else {
 361                                 c->cputype = CPU_VR4181A;
 362                                 __cpu_name[cpu] = "NEC VR4181A";
 363                         }
 364                         break;
 365                 case PRID_REV_VR4130:
 366                         if ((c->processor_id & 0xf) < 0x4) {
 367                                 c->cputype = CPU_VR4131;
 368                                 __cpu_name[cpu] = "NEC VR4131";
 369                         } else {
 370                                 c->cputype = CPU_VR4133;
 371                                 __cpu_name[cpu] = "NEC VR4133";
 372                         }
 373                         break;
 374                 default:
 375                         printk(KERN_INFO "Unexpected CPU of NEC VR4100 series\n");
 376                         c->cputype = CPU_VR41XX;
 377                         __cpu_name[cpu] = "NEC Vr41xx";
 378                         break;
 379                 }
 380                 c->isa_level = MIPS_CPU_ISA_III;
 381                 c->options = R4K_OPTS;
 382                 c->tlbsize = 32;
 383                 break;
 384         case PRID_IMP_R4300:
 385                 c->cputype = CPU_R4300;
 386                 __cpu_name[cpu] = "R4300";
 387                 c->isa_level = MIPS_CPU_ISA_III;
 388                 c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR |
 389                              MIPS_CPU_LLSC;
 390                 c->tlbsize = 32;
 391                 break;
 392         case PRID_IMP_R4600:
 393                 c->cputype = CPU_R4600;
 394                 __cpu_name[cpu] = "R4600";
 395                 c->isa_level = MIPS_CPU_ISA_III;
 396                 c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR |
 397                              MIPS_CPU_LLSC;
 398                 c->tlbsize = 48;
 399                 break;
 400         #if 0
 401         case PRID_IMP_R4650:
 402                 /*
 403                  * This processor doesn't have an MMU, so it's not
 404                  * "real easy" to run Linux on it. It is left purely
 405                  * for documentation.  Commented out because it shares
 406                  * it's c0_prid id number with the TX3900.
 407                  */
 408                 c->cputype = CPU_R4650;
 409                 __cpu_name[cpu] = "R4650";
 410                 c->isa_level = MIPS_CPU_ISA_III;
 411                 c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_LLSC;
 412                 c->tlbsize = 48;
 413                 break;
 414         #endif
 415         case PRID_IMP_TX39:
 416                 c->isa_level = MIPS_CPU_ISA_I;
 417                 c->options = MIPS_CPU_TLB | MIPS_CPU_TX39_CACHE;
 418
 419                 if ((c->processor_id & 0xf0) == (PRID_REV_TX3927 & 0xf0)) {
 420                         c->cputype = CPU_TX3927;
 421                         __cpu_name[cpu] = "TX3927";
 422                         c->tlbsize = 64;
 423                 } else {
 424                         switch (c->processor_id & 0xff) {
 425                         case PRID_REV_TX3912:
 426                                 c->cputype = CPU_TX3912;
 427                                 __cpu_name[cpu] = "TX3912";
 428                                 c->tlbsize = 32;
 429                                 break;
 430                         case PRID_REV_TX3922:
 431                                 c->cputype = CPU_TX3922;
 432                                 __cpu_name[cpu] = "TX3922";
 433                                 c->tlbsize = 64;
 434                                 break;
 435                         }
 436                 }
 437                 break;
 438         case PRID_IMP_R4700:
 439                 c->cputype = CPU_R4700;
 440                 __cpu_name[cpu] = "R4700";
 441                 c->isa_level = MIPS_CPU_ISA_III;
 442                 c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR |
 443                              MIPS_CPU_LLSC;
 444                 c->tlbsize = 48;
 445                 break;
 446         case PRID_IMP_TX49:
 447                 c->cputype = CPU_TX49XX;
 448                 __cpu_name[cpu] = "R49XX";
 449                 c->isa_level = MIPS_CPU_ISA_III;
 450                 c->options = R4K_OPTS | MIPS_CPU_LLSC;
 451                 if (!(c->processor_id & 0x08))
 452                         c->options |= MIPS_CPU_FPU | MIPS_CPU_32FPR;
 453                 c->tlbsize = 48;
 454                 break;
 455         case PRID_IMP_R5000:
 456                 c->cputype = CPU_R5000;
 457                 __cpu_name[cpu] = "R5000";
 458                 c->isa_level = MIPS_CPU_ISA_IV;
 459                 c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR |
 460                              MIPS_CPU_LLSC;
 461                 c->tlbsize = 48;
 462                 break;
 463         case PRID_IMP_R5432:
 464                 c->cputype = CPU_R5432;
 465                 __cpu_name[cpu] = "R5432";
 466                 c->isa_level = MIPS_CPU_ISA_IV;
 467                 c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR |
 468                              MIPS_CPU_WATCH | MIPS_CPU_LLSC;
 469                 c->tlbsize = 48;
 470                 break;
 471         case PRID_IMP_R5500:
 472                 c->cputype = CPU_R5500;
 473                 __cpu_name[cpu] = "R5500";
 474                 c->isa_level = MIPS_CPU_ISA_IV;
 475                 c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR |
 476                              MIPS_CPU_WATCH | MIPS_CPU_LLSC;
 477                 c->tlbsize = 48;
 478                 break;
 479         case PRID_IMP_NEVADA:
 480                 c->cputype = CPU_NEVADA;
 481                 __cpu_name[cpu] = "Nevada";
 482                 c->isa_level = MIPS_CPU_ISA_IV;
 483                 c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR |
 484                              MIPS_CPU_DIVEC | MIPS_CPU_LLSC;
 485                 c->tlbsize = 48;
 486                 break;
 487         case PRID_IMP_R6000:
 488                 c->cputype = CPU_R6000;
 489                 __cpu_name[cpu] = "R6000";
 490                 c->isa_level = MIPS_CPU_ISA_II;
 491                 c->options = MIPS_CPU_TLB | MIPS_CPU_FPU |
 492                              MIPS_CPU_LLSC;
 493                 c->tlbsize = 32;
 494                 break;
 495         case PRID_IMP_R6000A:
 496                 c->cputype = CPU_R6000A;
 497                 __cpu_name[cpu] = "R6000A";
 498                 c->isa_level = MIPS_CPU_ISA_II;
 499                 c->options = MIPS_CPU_TLB | MIPS_CPU_FPU |
 500                              MIPS_CPU_LLSC;
 501                 c->tlbsize = 32;
 502                 break;
 503         case PRID_IMP_RM7000:
 504                 c->cputype = CPU_RM7000;
 505                 __cpu_name[cpu] = "RM7000";
 506                 c->isa_level = MIPS_CPU_ISA_IV;
 507                 c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR |
 508                              MIPS_CPU_LLSC;
 509                 /*
 510                  * Undocumented RM7000:  Bit 29 in the info register of
 511                  * the RM7000 v2.0 indicates if the TLB has 48 or 64
 512                  * entries.
 513                  *
 514                  * 29      1 =>    64 entry JTLB
 515                  *         0 =>    48 entry JTLB
 516                  */
 517                 c->tlbsize = (read_c0_info() & (1 << 29)) ? 64 : 48;
 518                 break;
 519         case PRID_IMP_RM9000:
 520                 c->cputype = CPU_RM9000;
 521                 __cpu_name[cpu] = "RM9000";
 522                 c->isa_level = MIPS_CPU_ISA_IV;
 523                 c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR |
 524                              MIPS_CPU_LLSC;
 525                 /*
 526                  * Bit 29 in the info register of the RM9000
 527                  * indicates if the TLB has 48 or 64 entries.
 528                  *
 529                  * 29      1 =>    64 entry JTLB
 530                  *         0 =>    48 entry JTLB
 531                  */
 532                 c->tlbsize = (read_c0_info() & (1 << 29)) ? 64 : 48;
 533                 break;
 534         case PRID_IMP_R8000:
 535                 c->cputype = CPU_R8000;
 536                 __cpu_name[cpu] = "RM8000";
 537                 c->isa_level = MIPS_CPU_ISA_IV;
 538                 c->options = MIPS_CPU_TLB | MIPS_CPU_4KEX |
 539                              MIPS_CPU_FPU | MIPS_CPU_32FPR |
 540                              MIPS_CPU_LLSC;
 541                 c->tlbsize = 384;      /* has weird TLB: 3-way x 128 */
 542                 break;
 543         case PRID_IMP_R10000:
 544                 c->cputype = CPU_R10000;
 545                 __cpu_name[cpu] = "R10000";
 546                 c->isa_level = MIPS_CPU_ISA_IV;
 547                 c->options = MIPS_CPU_TLB | MIPS_CPU_4K_CACHE | MIPS_CPU_4KEX |
 548                              MIPS_CPU_FPU | MIPS_CPU_32FPR |
 549                              MIPS_CPU_COUNTER | MIPS_CPU_WATCH |
 550                              MIPS_CPU_LLSC;
 551                 c->tlbsize = 64;
 552                 break;
 553         case PRID_IMP_R12000:
 554                 c->cputype = CPU_R12000;
 555                 __cpu_name[cpu] = "R12000";
 556                 c->isa_level = MIPS_CPU_ISA_IV;
 557                 c->options = MIPS_CPU_TLB | MIPS_CPU_4K_CACHE | MIPS_CPU_4KEX |
 558                              MIPS_CPU_FPU | MIPS_CPU_32FPR |
 559                              MIPS_CPU_COUNTER | MIPS_CPU_WATCH |
 560                              MIPS_CPU_LLSC;
 561                 c->tlbsize = 64;
 562                 break;
 563         case PRID_IMP_R14000:
 564                 c->cputype = CPU_R14000;
 565                 __cpu_name[cpu] = "R14000";
 566                 c->isa_level = MIPS_CPU_ISA_IV;
 567                 c->options = MIPS_CPU_TLB | MIPS_CPU_4K_CACHE | MIPS_CPU_4KEX |
 568                              MIPS_CPU_FPU | MIPS_CPU_32FPR |
 569                              MIPS_CPU_COUNTER | MIPS_CPU_WATCH |
 570                              MIPS_CPU_LLSC;
 571                 c->tlbsize = 64;
 572                 break;
 573         case PRID_IMP_LOONGSON2:
 574                 c->cputype = CPU_LOONGSON2;
 575                 __cpu_name[cpu] = "ICT Loongson-2";
 576                 c->isa_level = MIPS_CPU_ISA_III;
 577                 c->options = R4K_OPTS |
 578                              MIPS_CPU_FPU | MIPS_CPU_LLSC |
 579                              MIPS_CPU_32FPR;
 580                 c->tlbsize = 64;
 581                 break;
 582         }
 583 }
 584
 585 static char unknown_isa[] __cpuinitdata = KERN_ERR \
 586         "Unsupported ISA type, c0.config0: %d.";
 587
 588 static inline unsigned int decode_config0(struct cpuinfo_mips *c)
 589 {
 590         unsigned int config0;
 591         int isa;
 592
 593         config0 = read_c0_config();
 594
 595         if (((config0 & MIPS_CONF_MT) >> 7) == 1)
 596                 c->options |= MIPS_CPU_TLB;
 597         isa = (config0 & MIPS_CONF_AT) >> 13;
 598         switch (isa) {
 599         case 0:
 600                 switch ((config0 & MIPS_CONF_AR) >> 10) {
 601                 case 0:
 602                         c->isa_level = MIPS_CPU_ISA_M32R1;
 603                         break;
 604                 case 1:
 605                         c->isa_level = MIPS_CPU_ISA_M32R2;
 606                         break;
 607                 default:
 608                         goto unknown;
 609                 }
 610                 break;
 611         case 2:
 612                 switch ((config0 & MIPS_CONF_AR) >> 10) {
 613                 case 0:
 614                         c->isa_level = MIPS_CPU_ISA_M64R1;
 615                         break;
 616                 case 1:
 617                         c->isa_level = MIPS_CPU_ISA_M64R2;
 618                         break;
 619                 default:
 620                         goto unknown;
 621                 }
 622                 break;
 623         default:
 624                 goto unknown;
 625         }
 626
 627         return config0 & MIPS_CONF_M;
 628
 629 unknown:
 630         panic(unknown_isa, config0);
 631 }
 632
 633 static inline unsigned int decode_config1(struct cpuinfo_mips *c)
 634 {
 635         unsigned int config1;
 636
 637         config1 = read_c0_config1();
 638
 639         if (config1 & MIPS_CONF1_MD)
 640                 c->ases |= MIPS_ASE_MDMX;
 641         if (config1 & MIPS_CONF1_WR)
 642                 c->options |= MIPS_CPU_WATCH;
 643         if (config1 & MIPS_CONF1_CA)
 644                 c->ases |= MIPS_ASE_MIPS16;
 645         if (config1 & MIPS_CONF1_EP)
 646                 c->options |= MIPS_CPU_EJTAG;
 647         if (config1 & MIPS_CONF1_FP) {
 648                 c->options |= MIPS_CPU_FPU;
 649                 c->options |= MIPS_CPU_32FPR;
 650         }
 651         if (cpu_has_tlb)
 652                 c->tlbsize = ((config1 & MIPS_CONF1_TLBS) >> 25) + 1;
 653
 654         return config1 & MIPS_CONF_M;
 655 }
 656
 657 static inline unsigned int decode_config2(struct cpuinfo_mips *c)
 658 {
 659         unsigned int config2;
 660
 661         config2 = read_c0_config2();
 662
 663         if (config2 & MIPS_CONF2_SL)
 664                 c->scache.flags &= ~MIPS_CACHE_NOT_PRESENT;
 665
 666         return config2 & MIPS_CONF_M;
 667 }
 668
 669 static inline unsigned int decode_config3(struct cpuinfo_mips *c)
 670 {
 671         unsigned int config3;
 672
 673         config3 = read_c0_config3();
 674
 675         if (config3 & MIPS_CONF3_SM)
 676                 c->ases |= MIPS_ASE_SMARTMIPS;
 677         if (config3 & MIPS_CONF3_DSP)
 678                 c->ases |= MIPS_ASE_DSP;
 679         if (config3 & MIPS_CONF3_VINT)
 680                 c->options |= MIPS_CPU_VINT;
 681         if (config3 & MIPS_CONF3_VEIC)
 682                 c->options |= MIPS_CPU_VEIC;
 683         if (config3 & MIPS_CONF3_MT)
 684                 c->ases |= MIPS_ASE_MIPSMT;
 685         if (config3 & MIPS_CONF3_ULRI)
 686                 c->options |= MIPS_CPU_ULRI;
 687
 688         return config3 & MIPS_CONF_M;
 689 }
 690
 691 static void __cpuinit decode_configs(struct cpuinfo_mips *c)
 692 {
 693         int ok;
 694
 695         /* MIPS32 or MIPS64 compliant CPU.  */
 696         c->options = MIPS_CPU_4KEX | MIPS_CPU_4K_CACHE | MIPS_CPU_COUNTER |
 697                      MIPS_CPU_DIVEC | MIPS_CPU_LLSC | MIPS_CPU_MCHECK;
 698
 699         c->scache.flags = MIPS_CACHE_NOT_PRESENT;
 700
 701         ok = decode_config0(c);                 /* Read Config registers.  */
 702         BUG_ON(!ok);                            /* Arch spec violation!  */
 703         if (ok)
 704                 ok = decode_config1(c);
 705         if (ok)
 706                 ok = decode_config2(c);
 707         if (ok)
 708                 ok = decode_config3(c);
 709
 710         mips_probe_watch_registers(c);
 711 }
 712
 713 #ifdef CONFIG_CPU_MIPSR2
 714 extern void spram_config(void);
 715 #else
 716 static inline void spram_config(void) {}
 717 #endif
 718
 719 static inline void cpu_probe_mips(struct cpuinfo_mips *c, unsigned int cpu)
 720 {
 721         decode_configs(c);
 722         switch (c->processor_id & 0xff00) {
 723         case PRID_IMP_4KC:
 724                 c->cputype = CPU_4KC;
 725                 __cpu_name[cpu] = "MIPS 4Kc";
 726                 break;
 727         case PRID_IMP_4KEC:
 728                 c->cputype = CPU_4KEC;
 729                 __cpu_name[cpu] = "MIPS 4KEc";
 730                 break;
 731         case PRID_IMP_4KECR2:
 732                 c->cputype = CPU_4KEC;
 733                 __cpu_name[cpu] = "MIPS 4KEc";
 734                 break;
 735         case PRID_IMP_4KSC:
 736         case PRID_IMP_4KSD:
 737                 c->cputype = CPU_4KSC;
 738                 __cpu_name[cpu] = "MIPS 4KSc";
 739                 break;
 740         case PRID_IMP_5KC:
 741                 c->cputype = CPU_5KC;
 742                 __cpu_name[cpu] = "MIPS 5Kc";
 743                 break;
 744         case PRID_IMP_20KC:
 745                 c->cputype = CPU_20KC;
 746                 __cpu_name[cpu] = "MIPS 20Kc";
 747                 break;
 748         case PRID_IMP_24K:
 749         case PRID_IMP_24KE:
 750                 c->cputype = CPU_24K;
 751                 __cpu_name[cpu] = "MIPS 24Kc";
 752                 break;
 753         case PRID_IMP_25KF:
 754                 c->cputype = CPU_25KF;
 755                 __cpu_name[cpu] = "MIPS 25Kc";
 756                 break;
 757         case PRID_IMP_34K:
 758                 c->cputype = CPU_34K;
 759                 __cpu_name[cpu] = "MIPS 34Kc";
 760                 break;
 761         case PRID_IMP_74K:
 762                 c->cputype = CPU_74K;
 763                 __cpu_name[cpu] = "MIPS 74Kc";
 764                 break;
 765         case PRID_IMP_1004K:
 766                 c->cputype = CPU_1004K;
 767                 __cpu_name[cpu] = "MIPS 1004Kc";
 768                 break;
 769         }
 770
 771         spram_config();
 772 }
 773
 774 static inline void cpu_probe_alchemy(struct cpuinfo_mips *c, unsigned int cpu)
 775 {
 776         decode_configs(c);
 777         switch (c->processor_id & 0xff00) {
 778         case PRID_IMP_AU1_REV1:
 779         case PRID_IMP_AU1_REV2:
 780                 c->cputype = CPU_ALCHEMY;
 781                 switch ((c->processor_id >> 24) & 0xff) {
 782                 case 0:
 783                         __cpu_name[cpu] = "Au1000";
 784                         break;
 785                 case 1:
 786                         __cpu_name[cpu] = "Au1500";
 787                         break;
 788                 case 2:
 789                         __cpu_name[cpu] = "Au1100";
 790                         break;
 791                 case 3:
 792                         __cpu_name[cpu] = "Au1550";
 793                         break;
 794                 case 4:
 795                         __cpu_name[cpu] = "Au1200";
 796                         if ((c->processor_id & 0xff) == 2)
 797                                 __cpu_name[cpu] = "Au1250";
 798                         break;
 799                 case 5:
 800                         __cpu_name[cpu] = "Au1210";
 801                         break;
 802                 default:
 803                         __cpu_name[cpu] = "Au1xxx";
 804                         break;
 805                 }
 806                 break;
 807         }
 808 }
 809
 810 static inline void cpu_probe_sibyte(struct cpuinfo_mips *c, unsigned int cpu)
 811 {
 812         decode_configs(c);
 813
 814         switch (c->processor_id & 0xff00) {
 815         case PRID_IMP_SB1:
 816                 c->cputype = CPU_SB1;
 817                 __cpu_name[cpu] = "SiByte SB1";
 818                 /* FPU in pass1 is known to have issues. */
 819                 if ((c->processor_id & 0xff) < 0x02)
 820                         c->options &= ~(MIPS_CPU_FPU | MIPS_CPU_32FPR);
 821                 break;
 822         case PRID_IMP_SB1A:
 823                 c->cputype = CPU_SB1A;
 824                 __cpu_name[cpu] = "SiByte SB1A";
 825                 break;
 826         }
 827 }
 828
 829 static inline void cpu_probe_sandcraft(struct cpuinfo_mips *c, unsigned int cpu)
 830 {
 831         decode_configs(c);
 832         switch (c->processor_id & 0xff00) {
 833         case PRID_IMP_SR71000:
 834                 c->cputype = CPU_SR71000;
 835                 __cpu_name[cpu] = "Sandcraft SR71000";
 836                 c->scache.ways = 8;
 837                 c->tlbsize = 64;
 838                 break;
 839         }
 840 }
 841
 842 static inline void cpu_probe_nxp(struct cpuinfo_mips *c, unsigned int cpu)
 843 {
 844         decode_configs(c);
 845         switch (c->processor_id & 0xff00) {
 846         case PRID_IMP_PR4450:
 847                 c->cputype = CPU_PR4450;
 848                 __cpu_name[cpu] = "Philips PR4450";
 849                 c->isa_level = MIPS_CPU_ISA_M32R1;
 850                 break;
 851         }
 852 }
 853
 854 static inline void cpu_probe_broadcom(struct cpuinfo_mips *c, unsigned int cpu)
 855 {
 856         decode_configs(c);
 857         switch (c->processor_id & 0xff00) {
 858         case PRID_IMP_BCM3302:
 859                 c->cputype = CPU_BCM3302;
 860                 __cpu_name[cpu] = "Broadcom BCM3302";
 861                 break;
 862         case PRID_IMP_BCM4710:
 863                 c->cputype = CPU_BCM4710;
 864                 __cpu_name[cpu] = "Broadcom BCM4710";
 865                 break;
 866         }
 867 }
 868
 869 static inline void cpu_probe_cavium(struct cpuinfo_mips *c, unsigned int cpu)
 870 {
 871         decode_configs(c);
 872         switch (c->processor_id & 0xff00) {
 873         case PRID_IMP_CAVIUM_CN38XX:
 874         case PRID_IMP_CAVIUM_CN31XX:
 875         case PRID_IMP_CAVIUM_CN30XX:
 876         case PRID_IMP_CAVIUM_CN58XX:
 877         case PRID_IMP_CAVIUM_CN56XX:
 878         case PRID_IMP_CAVIUM_CN50XX:
 879         case PRID_IMP_CAVIUM_CN52XX:
 880                 c->cputype = CPU_CAVIUM_OCTEON;
 881                 __cpu_name[cpu] = "Cavium Octeon";
 882                 break;
 883         default:
 884                 printk(KERN_INFO "Unknown Octeon chip!\n");
 885                 c->cputype = CPU_UNKNOWN;
 886                 break;
 887         }
 888 }
 889
 890 const char *__cpu_name[NR_CPUS];
 891
 892 __cpuinit void cpu_probe(void)
 893 {
 894         struct cpuinfo_mips *c = &current_cpu_data;
 895         unsigned int cpu = smp_processor_id();
 896
 897         c->processor_id = PRID_IMP_UNKNOWN;
 898         c->fpu_id       = FPIR_IMP_NONE;
 899         c->cputype      = CPU_UNKNOWN;
 900
 901         c->processor_id = read_c0_prid();
 902         switch (c->processor_id & 0xff0000) {
 903         case PRID_COMP_LEGACY:
 904                 cpu_probe_legacy(c, cpu);
 905                 break;
 906         case PRID_COMP_MIPS:
 907                 cpu_probe_mips(c, cpu);
 908                 break;
 909         case PRID_COMP_ALCHEMY:
 910                 cpu_probe_alchemy(c, cpu);
 911                 break;
 912         case PRID_COMP_SIBYTE:
 913                 cpu_probe_sibyte(c, cpu);
 914                 break;
 915         case PRID_COMP_BROADCOM:
 916                 cpu_probe_broadcom(c, cpu);
 917                 break;
 918         case PRID_COMP_SANDCRAFT:
 919                 cpu_probe_sandcraft(c, cpu);
 920                 break;
 921         case PRID_COMP_NXP:
 922                 cpu_probe_nxp(c, cpu);
 923                 break;
 924         case PRID_COMP_CAVIUM:
 925                 cpu_probe_cavium(c, cpu);
 926                 break;
 927         }
 928
 929         BUG_ON(!__cpu_name[cpu]);
 930         BUG_ON(c->cputype == CPU_UNKNOWN);
 931
 932         /*
 933          * Platform code can force the cpu type to optimize code
 934          * generation. In that case be sure the cpu type is correctly
 935          * manually setup otherwise it could trigger some nasty bugs.
 936          */
 937         BUG_ON(current_cpu_type() != c->cputype);
 938
 939         if (c->options & MIPS_CPU_FPU) {
 940                 c->fpu_id = cpu_get_fpu_id();
 941
 942                 if (c->isa_level == MIPS_CPU_ISA_M32R1 ||
 943                     c->isa_level == MIPS_CPU_ISA_M32R2 ||
 944                     c->isa_level == MIPS_CPU_ISA_M64R1 ||
 945                     c->isa_level == MIPS_CPU_ISA_M64R2) {
 946                         if (c->fpu_id & MIPS_FPIR_3D)
 947                                 c->ases |= MIPS_ASE_MIPS3D;
 948                 }
 949         }
 950
 951         if (cpu_has_mips_r2)
 952                 c->srsets = ((read_c0_srsctl() >> 26) & 0x0f) + 1;
 953         else
 954                 c->srsets = 1;
 955 }
 956
 957 __cpuinit void cpu_report(void)
 958 {
 959         struct cpuinfo_mips *c = &current_cpu_data;
 960
 961         printk(KERN_INFO "CPU revision is: %08x (%s)\n",
 962                c->processor_id, cpu_name_string());
 963         if (c->options & MIPS_CPU_FPU)
 964                 printk(KERN_INFO "FPU revision is: %08x\n", c->fpu_id);
 965 }