Merge branch 'davinci-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
[pandora-kernel.git] / arch / mips / include / asm / mach-ar7 / ar7.h
1 /*
2  * Copyright (C) 2006,2007 Felix Fietkau <nbd@openwrt.org>
3  * Copyright (C) 2006,2007 Eugene Konev <ejka@openwrt.org>
4  *
5  * This program is free software; you can redistribute it and/or modify
6  * it under the terms of the GNU General Public License as published by
7  * the Free Software Foundation; either version 2 of the License, or
8  * (at your option) any later version.
9  *
10  * This program is distributed in the hope that it will be useful,
11  * but WITHOUT ANY WARRANTY; without even the implied warranty of
12  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
13  * GNU General Public License for more details.
14  *
15  * You should have received a copy of the GNU General Public License
16  * along with this program; if not, write to the Free Software
17  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
18  */
19
20 #ifndef __AR7_H__
21 #define __AR7_H__
22
23 #include <linux/delay.h>
24 #include <linux/io.h>
25 #include <linux/errno.h>
26
27 #include <asm/addrspace.h>
28
29 #define AR7_SDRAM_BASE  0x14000000
30
31 #define AR7_REGS_BASE   0x08610000
32
33 #define AR7_REGS_MAC0   (AR7_REGS_BASE + 0x0000)
34 #define AR7_REGS_GPIO   (AR7_REGS_BASE + 0x0900)
35 /* 0x08610A00 - 0x08610BFF (512 bytes, 128 bytes / clock) */
36 #define AR7_REGS_POWER  (AR7_REGS_BASE + 0x0a00)
37 #define AR7_REGS_CLOCKS (AR7_REGS_POWER + 0x80)
38 #define UR8_REGS_CLOCKS (AR7_REGS_POWER + 0x20)
39 #define AR7_REGS_UART0  (AR7_REGS_BASE + 0x0e00)
40 #define AR7_REGS_USB    (AR7_REGS_BASE + 0x1200)
41 #define AR7_REGS_RESET  (AR7_REGS_BASE + 0x1600)
42 #define AR7_REGS_VLYNQ0 (AR7_REGS_BASE + 0x1800)
43 #define AR7_REGS_DCL    (AR7_REGS_BASE + 0x1a00)
44 #define AR7_REGS_VLYNQ1 (AR7_REGS_BASE + 0x1c00)
45 #define AR7_REGS_MDIO   (AR7_REGS_BASE + 0x1e00)
46 #define AR7_REGS_IRQ    (AR7_REGS_BASE + 0x2400)
47 #define AR7_REGS_MAC1   (AR7_REGS_BASE + 0x2800)
48
49 #define AR7_REGS_WDT    (AR7_REGS_BASE + 0x1f00)
50 #define UR8_REGS_WDT    (AR7_REGS_BASE + 0x0b00)
51 #define UR8_REGS_UART1  (AR7_REGS_BASE + 0x0f00)
52
53 #define AR7_RESET_PEREPHERIAL   0x0
54 #define AR7_RESET_SOFTWARE      0x4
55 #define AR7_RESET_STATUS        0x8
56
57 #define AR7_RESET_BIT_CPMAC_LO  17
58 #define AR7_RESET_BIT_CPMAC_HI  21
59 #define AR7_RESET_BIT_MDIO      22
60 #define AR7_RESET_BIT_EPHY      26
61
62 /* GPIO control registers */
63 #define AR7_GPIO_INPUT  0x0
64 #define AR7_GPIO_OUTPUT 0x4
65 #define AR7_GPIO_DIR    0x8
66 #define AR7_GPIO_ENABLE 0xc
67
68 #define AR7_CHIP_7100   0x18
69 #define AR7_CHIP_7200   0x2b
70 #define AR7_CHIP_7300   0x05
71
72 /* Interrupts */
73 #define AR7_IRQ_UART0   15
74 #define AR7_IRQ_UART1   16
75
76 /* Clocks */
77 #define AR7_AFE_CLOCK   35328000
78 #define AR7_REF_CLOCK   25000000
79 #define AR7_XTAL_CLOCK  24000000
80
81 /* DCL */
82 #define AR7_WDT_HW_ENA  0x10
83
84 struct plat_cpmac_data {
85         int reset_bit;
86         int power_bit;
87         u32 phy_mask;
88         char dev_addr[6];
89 };
90
91 struct plat_dsl_data {
92         int reset_bit_dsl;
93         int reset_bit_sar;
94 };
95
96 extern int ar7_cpu_clock, ar7_bus_clock, ar7_dsp_clock;
97
98 static inline u16 ar7_chip_id(void)
99 {
100         return readl((void *)KSEG1ADDR(AR7_REGS_GPIO + 0x14)) & 0xffff;
101 }
102
103 static inline u8 ar7_chip_rev(void)
104 {
105         return (readl((void *)KSEG1ADDR(AR7_REGS_GPIO + 0x14)) >> 16) & 0xff;
106 }
107
108 struct clk {
109         unsigned int    rate;
110 };
111
112 static inline int ar7_has_high_cpmac(void)
113 {
114         u16 chip_id = ar7_chip_id();
115         switch (chip_id) {
116         case AR7_CHIP_7100:
117         case AR7_CHIP_7200:
118                 return 0;
119         case AR7_CHIP_7300:
120                 return 1;
121         default:
122                 return -ENXIO;
123         }
124 }
125 #define ar7_has_high_vlynq ar7_has_high_cpmac
126 #define ar7_has_second_uart ar7_has_high_cpmac
127
128 static inline void ar7_device_enable(u32 bit)
129 {
130         void *reset_reg =
131                 (void *)KSEG1ADDR(AR7_REGS_RESET + AR7_RESET_PEREPHERIAL);
132         writel(readl(reset_reg) | (1 << bit), reset_reg);
133         msleep(20);
134 }
135
136 static inline void ar7_device_disable(u32 bit)
137 {
138         void *reset_reg =
139                 (void *)KSEG1ADDR(AR7_REGS_RESET + AR7_RESET_PEREPHERIAL);
140         writel(readl(reset_reg) & ~(1 << bit), reset_reg);
141         msleep(20);
142 }
143
144 static inline void ar7_device_reset(u32 bit)
145 {
146         ar7_device_disable(bit);
147         ar7_device_enable(bit);
148 }
149
150 static inline void ar7_device_on(u32 bit)
151 {
152         void *power_reg = (void *)KSEG1ADDR(AR7_REGS_POWER);
153         writel(readl(power_reg) | (1 << bit), power_reg);
154         msleep(20);
155 }
156
157 static inline void ar7_device_off(u32 bit)
158 {
159         void *power_reg = (void *)KSEG1ADDR(AR7_REGS_POWER);
160         writel(readl(power_reg) & ~(1 << bit), power_reg);
161         msleep(20);
162 }
163
164 #endif /* __AR7_H__ */