Merge branch 'topic/hda' into for-linus
[pandora-kernel.git] / arch / m32r / kernel / head.S
1 /*
2  *  linux/arch/m32r/kernel/head.S
3  *
4  *  M32R startup code.
5  *
6  *  Copyright (c) 2001, 2002  Hiroyuki Kondo, Hirokazu Takata,
7  *                            Hitoshi Yamamoto
8  */
9
10 #include <linux/init.h>
11 __INIT
12 __INITDATA
13
14         .text
15 #include <linux/linkage.h>
16 #include <asm/segment.h>
17 #include <asm/page.h>
18 #include <asm/pgtable.h>
19 #include <asm/assembler.h>
20 #include <asm/m32r.h>
21 #include <asm/mmu_context.h>
22
23 /*
24  * References to members of the boot_cpu_data structure.
25  */
26 __HEAD
27         .global start_kernel
28         .global __bss_start
29         .global _end
30 ENTRY(stext)
31 ENTRY(_stext)
32         /* Setup up the stack pointer */
33         LDIMM   (r0, spi_stack_top)
34         LDIMM   (r1, spu_stack_top)
35         mvtc    r0, spi
36         mvtc    r1, spu
37
38         /* Initilalize PSW */
39         ldi     r0, #0x0000             /* use SPI, disable EI */
40         mvtc    r0, psw
41
42         /* Set up the stack pointer */
43         LDIMM   (r0, stack_start)
44         ld      r0, @r0
45         mvtc    r0, spi
46
47 /*
48  * Clear BSS first so that there are no surprises...
49  */
50 #ifdef CONFIG_ISA_DUAL_ISSUE
51
52         LDIMM   (r2, __bss_start)
53         LDIMM   (r3, _end)
54         sub     r3, r2          ; BSS size in bytes
55         ; R4 = BSS size in longwords (rounded down)
56         mv      r4, r3              ||  ldi     r1, #0
57         srli    r4, #4              ||  addi    r2, #-4
58         beqz    r4, .Lendloop1
59 .Lloop1:
60 #ifndef CONFIG_CHIP_M32310
61         ; Touch memory for the no-write-allocating cache.
62         ld      r0, @(4,r2)
63 #endif
64         st      r1, @+r2            ||  addi    r4, #-1
65         st      r1, @+r2
66         st      r1, @+r2
67         st      r1, @+r2            ||  cmpeq   r1, r4  ; R4 = 0?
68         bnc     .Lloop1
69 .Lendloop1:
70         and3    r4, r3, #15
71         addi    r2, #4
72         beqz    r4, .Lendloop2
73 .Lloop2:
74         stb     r1, @r2             ||  addi    r4, #-1
75         addi    r2, #1
76         bnez    r4, .Lloop2
77 .Lendloop2:
78
79 #else /* not CONFIG_ISA_DUAL_ISSUE */
80
81         LDIMM   (r2, __bss_start)
82         LDIMM   (r3, _end)
83         sub     r3, r2          ; BSS size in bytes
84         mv      r4, r3
85         srli    r4, #2          ; R4 = BSS size in longwords (rounded down)
86         ldi     r1, #0          ; clear R1 for longwords store
87         addi    r2, #-4         ; account for pre-inc store
88         beqz    r4, .Lendloop1  ; any more to go?
89 .Lloop1:
90         st      r1, @+r2        ; yep, zero out another longword
91         addi    r4, #-1         ; decrement count
92         bnez    r4, .Lloop1     ; go do some more
93 .Lendloop1:
94         and3    r4, r3, #3      ; get no. of remaining BSS bytes to clear
95         addi    r2, #4          ; account for pre-inc store
96         beqz    r4, .Lendloop2  ; any more to go?
97 .Lloop2:
98         stb     r1, @r2         ; yep, zero out another byte
99         addi    r2, #1          ; bump address
100         addi    r4, #-1         ; decrement count
101         bnez    r4, .Lloop2     ; go do some more
102 .Lendloop2:
103
104 #endif /* not CONFIG_ISA_DUAL_ISSUE */
105
106 #if 0  /* M32R_FIXME */
107 /*
108  * Copy data segment from ROM to RAM.
109  */
110         .global ROM_D, TOP_DATA, END_DATA
111
112         LDIMM   (r1, ROM_D)
113         LDIMM   (r2, TOP_DATA)
114         LDIMM   (r3, END_DATA)
115         addi    r2, #-4
116         addi    r3, #-4
117 loop1:
118         ld      r0, @r1+
119         st      r0, @+r2
120         cmp     r2, r3
121         bc      loop1
122 #endif /* 0 */
123
124 /* Jump to kernel */
125         LDIMM   (r2, start_kernel)
126         jl      r2
127         .fillinsn
128 1:
129         bra     1b              ; main should never return here, but
130                                 ; just in case, we know what happens.
131
132 #ifdef CONFIG_SMP
133 /*
134  * AP startup routine
135  */
136         .global eit_vector
137 ENTRY(startup_AP)
138 ;; setup EVB
139         LDIMM  (r4, eit_vector)
140         mvtc   r4, cr5
141
142 ;; enable MMU
143         LDIMM   (r2, init_tlb)
144         jl      r2
145         seth  r4, #high(MATM)
146         or3   r4, r4, #low(MATM)
147         ldi   r5, #0x01
148         st    r5, @r4            ; Set MATM Reg(T bit ON)
149         ld    r6, @r4            ; MATM Check
150         LDIMM (r5, 1f)
151         jmp   r5                 ; enable MMU
152         nop
153         .fillinsn
154 1:
155 ;; ISN check
156         ld    r6, @r4            ; MATM Check
157         seth  r4, #high(M32R_ICU_ISTS_ADDR)
158         or3   r4, r4, #low(M32R_ICU_ISTS_ADDR)
159         ld    r5, @r4           ; Read ISTSi reg.
160         mv    r6, r5
161         slli  r5, #13  ; PIML check
162         srli  r5, #13  ;
163         seth  r4, #high(M32R_ICU_IMASK_ADDR)
164         or3   r4, r4, #low(M32R_ICU_IMASK_ADDR)
165         st    r5, @r4           ; Write IMASKi reg.
166         slli  r6, #4   ; ISN check
167         srli  r6, #26  ;
168         seth  r4, #high(M32R_IRQ_IPI5)
169         or3   r4, r4, #low(M32R_IRQ_IPI5)
170         bne   r4, r6, 2f  ; if (ISN != CPU_BOOT_IPI) goto sleep;
171
172 ;; check cpu_bootout_map and set cpu_bootin_map
173         LDIMM (r4, cpu_bootout_map)
174         ld    r4, @r4
175         seth  r5, #high(M32R_CPUID_PORTL)
176         or3   r5, r5, #low(M32R_CPUID_PORTL)
177         ld    r5, @r5
178         ldi   r6, #1
179         sll   r6, r5
180         and   r4, r6
181         beqz  r4, 2f
182         LDIMM (r4, cpu_bootin_map)
183         ld    r5, @r4
184         or    r5, r6
185         st    r6, @r4
186
187 ;; clear PSW
188         ldi   r4, #0
189         mvtc  r4, psw
190
191 ;; setup SPI
192         LDIMM (r4, stack_start)
193         ld    r4, @r4
194         mvtc  r4, spi
195
196 ;; setup BPC (start_secondary)
197         LDIMM (r4, start_secondary)
198         mvtc  r4, bpc
199
200         rte  ; goto startup_secondary
201         nop
202         nop
203
204         .fillinsn
205 2:
206         ;; disable MMU
207         seth  r4, #high(MATM)
208         or3   r4, r4, #low(MATM)
209         ldi   r5, #0
210         st    r5, @r4            ; Set MATM Reg(T bit OFF)
211         ld    r6, @r4            ; MATM Check
212         LDIMM (r4, 3f)
213         seth  r5, #high(__PAGE_OFFSET)
214         or3   r5, r5, #low(__PAGE_OFFSET)
215         not   r5, r5
216         and   r4, r5
217         jmp   r4                 ; disable MMU
218         nop
219         .fillinsn
220 3:
221         ;; SLEEP and wait IPI
222         LDIMM (r4, AP_loop)
223         seth  r5, #high(__PAGE_OFFSET)
224         or3   r5, r5, #low(__PAGE_OFFSET)
225         not   r5, r5
226         and   r4, r5
227         jmp   r4
228         nop
229         nop
230 #endif  /* CONFIG_SMP */
231
232         .text
233 ENTRY(stack_start)
234         .long   init_thread_union+8192
235         .long   __KERNEL_DS
236
237 /*
238  * This is initialized to create a identity-mapping at 0-4M (for bootup
239  * purposes) and another mapping of the 0-4M area at virtual address
240  * PAGE_OFFSET.
241  */
242         .text
243
244 #define  MOUNT_ROOT_RDONLY    1
245 #define  RAMDISK_FLAGS        0         ; 1024KB
246 #define  ORIG_ROOT_DEV        0x0100    ; /dev/ram0 (major:01, minor:00)
247 #define  LOADER_TYPE          1         ; (??? - non-zero value seems
248                                         ; to be needed to boot from initrd)
249
250 #define  COMMAND_LINE ""
251
252         .section        .empty_zero_page, "aw"
253 ENTRY(empty_zero_page)
254         .long   MOUNT_ROOT_RDONLY               /* offset: +0x00 */
255         .long   RAMDISK_FLAGS
256         .long   ORIG_ROOT_DEV
257         .long   LOADER_TYPE
258         .long   0       /* INITRD_START */      /* +0x10 */
259         .long   0       /* INITRD_SIZE */
260         .long   0       /* CPU_CLOCK */
261         .long   0       /* BUS_CLOCK */
262         .long   0       /* TIMER_DIVIDE */      /* +0x20 */
263         .balign 256,0
264         .asciz  COMMAND_LINE
265         .byte   0
266         .balign 4096,0,4096
267
268 /*------------------------------------------------------------------------
269  * Stack area
270  */
271         .section .spi
272         ALIGN
273         .global spi_stack_top
274         .zero   1024
275 spi_stack_top:
276
277         .section .spu
278         ALIGN
279         .global spu_stack_top
280         .zero   1024
281 spu_stack_top:
282
283         .end