[PATCH] i386/smpboot: use msleep() instead of schedule_timeout()
[pandora-kernel.git] / arch / i386 / kernel / nmi.c
1 /*
2  *  linux/arch/i386/nmi.c
3  *
4  *  NMI watchdog support on APIC systems
5  *
6  *  Started by Ingo Molnar <mingo@redhat.com>
7  *
8  *  Fixes:
9  *  Mikael Pettersson   : AMD K7 support for local APIC NMI watchdog.
10  *  Mikael Pettersson   : Power Management for local APIC NMI watchdog.
11  *  Mikael Pettersson   : Pentium 4 support for local APIC NMI watchdog.
12  *  Pavel Machek and
13  *  Mikael Pettersson   : PM converted to driver model. Disable/enable API.
14  */
15
16 #include <linux/config.h>
17 #include <linux/mm.h>
18 #include <linux/irq.h>
19 #include <linux/delay.h>
20 #include <linux/bootmem.h>
21 #include <linux/smp_lock.h>
22 #include <linux/interrupt.h>
23 #include <linux/mc146818rtc.h>
24 #include <linux/kernel_stat.h>
25 #include <linux/module.h>
26 #include <linux/nmi.h>
27 #include <linux/sysdev.h>
28 #include <linux/sysctl.h>
29
30 #include <asm/smp.h>
31 #include <asm/div64.h>
32 #include <asm/nmi.h>
33
34 #include "mach_traps.h"
35
36 unsigned int nmi_watchdog = NMI_NONE;
37 extern int unknown_nmi_panic;
38 static unsigned int nmi_hz = HZ;
39 static unsigned int nmi_perfctr_msr;    /* the MSR to reset in NMI handler */
40 static unsigned int nmi_p4_cccr_val;
41 extern void show_registers(struct pt_regs *regs);
42
43 /*
44  * lapic_nmi_owner tracks the ownership of the lapic NMI hardware:
45  * - it may be reserved by some other driver, or not
46  * - when not reserved by some other driver, it may be used for
47  *   the NMI watchdog, or not
48  *
49  * This is maintained separately from nmi_active because the NMI
50  * watchdog may also be driven from the I/O APIC timer.
51  */
52 static DEFINE_SPINLOCK(lapic_nmi_owner_lock);
53 static unsigned int lapic_nmi_owner;
54 #define LAPIC_NMI_WATCHDOG      (1<<0)
55 #define LAPIC_NMI_RESERVED      (1<<1)
56
57 /* nmi_active:
58  * +1: the lapic NMI watchdog is active, but can be disabled
59  *  0: the lapic NMI watchdog has not been set up, and cannot
60  *     be enabled
61  * -1: the lapic NMI watchdog is disabled, but can be enabled
62  */
63 int nmi_active;
64
65 #define K7_EVNTSEL_ENABLE       (1 << 22)
66 #define K7_EVNTSEL_INT          (1 << 20)
67 #define K7_EVNTSEL_OS           (1 << 17)
68 #define K7_EVNTSEL_USR          (1 << 16)
69 #define K7_EVENT_CYCLES_PROCESSOR_IS_RUNNING    0x76
70 #define K7_NMI_EVENT            K7_EVENT_CYCLES_PROCESSOR_IS_RUNNING
71
72 #define P6_EVNTSEL0_ENABLE      (1 << 22)
73 #define P6_EVNTSEL_INT          (1 << 20)
74 #define P6_EVNTSEL_OS           (1 << 17)
75 #define P6_EVNTSEL_USR          (1 << 16)
76 #define P6_EVENT_CPU_CLOCKS_NOT_HALTED  0x79
77 #define P6_NMI_EVENT            P6_EVENT_CPU_CLOCKS_NOT_HALTED
78
79 #define MSR_P4_MISC_ENABLE      0x1A0
80 #define MSR_P4_MISC_ENABLE_PERF_AVAIL   (1<<7)
81 #define MSR_P4_MISC_ENABLE_PEBS_UNAVAIL (1<<12)
82 #define MSR_P4_PERFCTR0         0x300
83 #define MSR_P4_CCCR0            0x360
84 #define P4_ESCR_EVENT_SELECT(N) ((N)<<25)
85 #define P4_ESCR_OS              (1<<3)
86 #define P4_ESCR_USR             (1<<2)
87 #define P4_CCCR_OVF_PMI0        (1<<26)
88 #define P4_CCCR_OVF_PMI1        (1<<27)
89 #define P4_CCCR_THRESHOLD(N)    ((N)<<20)
90 #define P4_CCCR_COMPLEMENT      (1<<19)
91 #define P4_CCCR_COMPARE         (1<<18)
92 #define P4_CCCR_REQUIRED        (3<<16)
93 #define P4_CCCR_ESCR_SELECT(N)  ((N)<<13)
94 #define P4_CCCR_ENABLE          (1<<12)
95 /* Set up IQ_COUNTER0 to behave like a clock, by having IQ_CCCR0 filter
96    CRU_ESCR0 (with any non-null event selector) through a complemented
97    max threshold. [IA32-Vol3, Section 14.9.9] */
98 #define MSR_P4_IQ_COUNTER0      0x30C
99 #define P4_NMI_CRU_ESCR0        (P4_ESCR_EVENT_SELECT(0x3F)|P4_ESCR_OS|P4_ESCR_USR)
100 #define P4_NMI_IQ_CCCR0 \
101         (P4_CCCR_OVF_PMI0|P4_CCCR_THRESHOLD(15)|P4_CCCR_COMPLEMENT|     \
102          P4_CCCR_COMPARE|P4_CCCR_REQUIRED|P4_CCCR_ESCR_SELECT(4)|P4_CCCR_ENABLE)
103
104 static int __init check_nmi_watchdog(void)
105 {
106         unsigned int prev_nmi_count[NR_CPUS];
107         int cpu;
108
109         if (nmi_watchdog == NMI_NONE)
110                 return 0;
111
112         printk(KERN_INFO "Testing NMI watchdog ... ");
113
114         for (cpu = 0; cpu < NR_CPUS; cpu++)
115                 prev_nmi_count[cpu] = per_cpu(irq_stat, cpu).__nmi_count;
116         local_irq_enable();
117         mdelay((10*1000)/nmi_hz); // wait 10 ticks
118
119         for (cpu = 0; cpu < NR_CPUS; cpu++) {
120 #ifdef CONFIG_SMP
121                 /* Check cpu_callin_map here because that is set
122                    after the timer is started. */
123                 if (!cpu_isset(cpu, cpu_callin_map))
124                         continue;
125 #endif
126                 if (nmi_count(cpu) - prev_nmi_count[cpu] <= 5) {
127                         printk("CPU#%d: NMI appears to be stuck!\n", cpu);
128                         nmi_active = 0;
129                         lapic_nmi_owner &= ~LAPIC_NMI_WATCHDOG;
130                         return -1;
131                 }
132         }
133         printk("OK.\n");
134
135         /* now that we know it works we can reduce NMI frequency to
136            something more reasonable; makes a difference in some configs */
137         if (nmi_watchdog == NMI_LOCAL_APIC)
138                 nmi_hz = 1;
139
140         return 0;
141 }
142 /* This needs to happen later in boot so counters are working */
143 late_initcall(check_nmi_watchdog);
144
145 static int __init setup_nmi_watchdog(char *str)
146 {
147         int nmi;
148
149         get_option(&str, &nmi);
150
151         if (nmi >= NMI_INVALID)
152                 return 0;
153         if (nmi == NMI_NONE)
154                 nmi_watchdog = nmi;
155         /*
156          * If any other x86 CPU has a local APIC, then
157          * please test the NMI stuff there and send me the
158          * missing bits. Right now Intel P6/P4 and AMD K7 only.
159          */
160         if ((nmi == NMI_LOCAL_APIC) &&
161                         (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) &&
162                         (boot_cpu_data.x86 == 6 || boot_cpu_data.x86 == 15))
163                 nmi_watchdog = nmi;
164         if ((nmi == NMI_LOCAL_APIC) &&
165                         (boot_cpu_data.x86_vendor == X86_VENDOR_AMD) &&
166                         (boot_cpu_data.x86 == 6 || boot_cpu_data.x86 == 15))
167                 nmi_watchdog = nmi;
168         /*
169          * We can enable the IO-APIC watchdog
170          * unconditionally.
171          */
172         if (nmi == NMI_IO_APIC) {
173                 nmi_active = 1;
174                 nmi_watchdog = nmi;
175         }
176         return 1;
177 }
178
179 __setup("nmi_watchdog=", setup_nmi_watchdog);
180
181 static void disable_lapic_nmi_watchdog(void)
182 {
183         if (nmi_active <= 0)
184                 return;
185         switch (boot_cpu_data.x86_vendor) {
186         case X86_VENDOR_AMD:
187                 wrmsr(MSR_K7_EVNTSEL0, 0, 0);
188                 break;
189         case X86_VENDOR_INTEL:
190                 switch (boot_cpu_data.x86) {
191                 case 6:
192                         if (boot_cpu_data.x86_model > 0xd)
193                                 break;
194
195                         wrmsr(MSR_P6_EVNTSEL0, 0, 0);
196                         break;
197                 case 15:
198                         if (boot_cpu_data.x86_model > 0x4)
199                                 break;
200
201                         wrmsr(MSR_P4_IQ_CCCR0, 0, 0);
202                         wrmsr(MSR_P4_CRU_ESCR0, 0, 0);
203                         break;
204                 }
205                 break;
206         }
207         nmi_active = -1;
208         /* tell do_nmi() and others that we're not active any more */
209         nmi_watchdog = 0;
210 }
211
212 static void enable_lapic_nmi_watchdog(void)
213 {
214         if (nmi_active < 0) {
215                 nmi_watchdog = NMI_LOCAL_APIC;
216                 setup_apic_nmi_watchdog();
217         }
218 }
219
220 int reserve_lapic_nmi(void)
221 {
222         unsigned int old_owner;
223
224         spin_lock(&lapic_nmi_owner_lock);
225         old_owner = lapic_nmi_owner;
226         lapic_nmi_owner |= LAPIC_NMI_RESERVED;
227         spin_unlock(&lapic_nmi_owner_lock);
228         if (old_owner & LAPIC_NMI_RESERVED)
229                 return -EBUSY;
230         if (old_owner & LAPIC_NMI_WATCHDOG)
231                 disable_lapic_nmi_watchdog();
232         return 0;
233 }
234
235 void release_lapic_nmi(void)
236 {
237         unsigned int new_owner;
238
239         spin_lock(&lapic_nmi_owner_lock);
240         new_owner = lapic_nmi_owner & ~LAPIC_NMI_RESERVED;
241         lapic_nmi_owner = new_owner;
242         spin_unlock(&lapic_nmi_owner_lock);
243         if (new_owner & LAPIC_NMI_WATCHDOG)
244                 enable_lapic_nmi_watchdog();
245 }
246
247 void disable_timer_nmi_watchdog(void)
248 {
249         if ((nmi_watchdog != NMI_IO_APIC) || (nmi_active <= 0))
250                 return;
251
252         unset_nmi_callback();
253         nmi_active = -1;
254         nmi_watchdog = NMI_NONE;
255 }
256
257 void enable_timer_nmi_watchdog(void)
258 {
259         if (nmi_active < 0) {
260                 nmi_watchdog = NMI_IO_APIC;
261                 touch_nmi_watchdog();
262                 nmi_active = 1;
263         }
264 }
265
266 #ifdef CONFIG_PM
267
268 static int nmi_pm_active; /* nmi_active before suspend */
269
270 static int lapic_nmi_suspend(struct sys_device *dev, pm_message_t state)
271 {
272         nmi_pm_active = nmi_active;
273         disable_lapic_nmi_watchdog();
274         return 0;
275 }
276
277 static int lapic_nmi_resume(struct sys_device *dev)
278 {
279         if (nmi_pm_active > 0)
280                 enable_lapic_nmi_watchdog();
281         return 0;
282 }
283
284
285 static struct sysdev_class nmi_sysclass = {
286         set_kset_name("lapic_nmi"),
287         .resume         = lapic_nmi_resume,
288         .suspend        = lapic_nmi_suspend,
289 };
290
291 static struct sys_device device_lapic_nmi = {
292         .id     = 0,
293         .cls    = &nmi_sysclass,
294 };
295
296 static int __init init_lapic_nmi_sysfs(void)
297 {
298         int error;
299
300         if (nmi_active == 0 || nmi_watchdog != NMI_LOCAL_APIC)
301                 return 0;
302
303         error = sysdev_class_register(&nmi_sysclass);
304         if (!error)
305                 error = sysdev_register(&device_lapic_nmi);
306         return error;
307 }
308 /* must come after the local APIC's device_initcall() */
309 late_initcall(init_lapic_nmi_sysfs);
310
311 #endif  /* CONFIG_PM */
312
313 /*
314  * Activate the NMI watchdog via the local APIC.
315  * Original code written by Keith Owens.
316  */
317
318 static void clear_msr_range(unsigned int base, unsigned int n)
319 {
320         unsigned int i;
321
322         for(i = 0; i < n; ++i)
323                 wrmsr(base+i, 0, 0);
324 }
325
326 static inline void write_watchdog_counter(const char *descr)
327 {
328         u64 count = (u64)cpu_khz * 1000;
329
330         do_div(count, nmi_hz);
331         if(descr)
332                 Dprintk("setting %s to -0x%08Lx\n", descr, count);
333         wrmsrl(nmi_perfctr_msr, 0 - count);
334 }
335
336 static void setup_k7_watchdog(void)
337 {
338         unsigned int evntsel;
339
340         nmi_perfctr_msr = MSR_K7_PERFCTR0;
341
342         clear_msr_range(MSR_K7_EVNTSEL0, 4);
343         clear_msr_range(MSR_K7_PERFCTR0, 4);
344
345         evntsel = K7_EVNTSEL_INT
346                 | K7_EVNTSEL_OS
347                 | K7_EVNTSEL_USR
348                 | K7_NMI_EVENT;
349
350         wrmsr(MSR_K7_EVNTSEL0, evntsel, 0);
351         write_watchdog_counter("K7_PERFCTR0");
352         apic_write(APIC_LVTPC, APIC_DM_NMI);
353         evntsel |= K7_EVNTSEL_ENABLE;
354         wrmsr(MSR_K7_EVNTSEL0, evntsel, 0);
355 }
356
357 static void setup_p6_watchdog(void)
358 {
359         unsigned int evntsel;
360
361         nmi_perfctr_msr = MSR_P6_PERFCTR0;
362
363         clear_msr_range(MSR_P6_EVNTSEL0, 2);
364         clear_msr_range(MSR_P6_PERFCTR0, 2);
365
366         evntsel = P6_EVNTSEL_INT
367                 | P6_EVNTSEL_OS
368                 | P6_EVNTSEL_USR
369                 | P6_NMI_EVENT;
370
371         wrmsr(MSR_P6_EVNTSEL0, evntsel, 0);
372         write_watchdog_counter("P6_PERFCTR0");
373         apic_write(APIC_LVTPC, APIC_DM_NMI);
374         evntsel |= P6_EVNTSEL0_ENABLE;
375         wrmsr(MSR_P6_EVNTSEL0, evntsel, 0);
376 }
377
378 static int setup_p4_watchdog(void)
379 {
380         unsigned int misc_enable, dummy;
381
382         rdmsr(MSR_P4_MISC_ENABLE, misc_enable, dummy);
383         if (!(misc_enable & MSR_P4_MISC_ENABLE_PERF_AVAIL))
384                 return 0;
385
386         nmi_perfctr_msr = MSR_P4_IQ_COUNTER0;
387         nmi_p4_cccr_val = P4_NMI_IQ_CCCR0;
388 #ifdef CONFIG_SMP
389         if (smp_num_siblings == 2)
390                 nmi_p4_cccr_val |= P4_CCCR_OVF_PMI1;
391 #endif
392
393         if (!(misc_enable & MSR_P4_MISC_ENABLE_PEBS_UNAVAIL))
394                 clear_msr_range(0x3F1, 2);
395         /* MSR 0x3F0 seems to have a default value of 0xFC00, but current
396            docs doesn't fully define it, so leave it alone for now. */
397         if (boot_cpu_data.x86_model >= 0x3) {
398                 /* MSR_P4_IQ_ESCR0/1 (0x3ba/0x3bb) removed */
399                 clear_msr_range(0x3A0, 26);
400                 clear_msr_range(0x3BC, 3);
401         } else {
402                 clear_msr_range(0x3A0, 31);
403         }
404         clear_msr_range(0x3C0, 6);
405         clear_msr_range(0x3C8, 6);
406         clear_msr_range(0x3E0, 2);
407         clear_msr_range(MSR_P4_CCCR0, 18);
408         clear_msr_range(MSR_P4_PERFCTR0, 18);
409
410         wrmsr(MSR_P4_CRU_ESCR0, P4_NMI_CRU_ESCR0, 0);
411         wrmsr(MSR_P4_IQ_CCCR0, P4_NMI_IQ_CCCR0 & ~P4_CCCR_ENABLE, 0);
412         write_watchdog_counter("P4_IQ_COUNTER0");
413         apic_write(APIC_LVTPC, APIC_DM_NMI);
414         wrmsr(MSR_P4_IQ_CCCR0, nmi_p4_cccr_val, 0);
415         return 1;
416 }
417
418 void setup_apic_nmi_watchdog (void)
419 {
420         switch (boot_cpu_data.x86_vendor) {
421         case X86_VENDOR_AMD:
422                 if (boot_cpu_data.x86 != 6 && boot_cpu_data.x86 != 15)
423                         return;
424                 setup_k7_watchdog();
425                 break;
426         case X86_VENDOR_INTEL:
427                 switch (boot_cpu_data.x86) {
428                 case 6:
429                         if (boot_cpu_data.x86_model > 0xd)
430                                 return;
431
432                         setup_p6_watchdog();
433                         break;
434                 case 15:
435                         if (boot_cpu_data.x86_model > 0x4)
436                                 return;
437
438                         if (!setup_p4_watchdog())
439                                 return;
440                         break;
441                 default:
442                         return;
443                 }
444                 break;
445         default:
446                 return;
447         }
448         lapic_nmi_owner = LAPIC_NMI_WATCHDOG;
449         nmi_active = 1;
450 }
451
452 /*
453  * the best way to detect whether a CPU has a 'hard lockup' problem
454  * is to check it's local APIC timer IRQ counts. If they are not
455  * changing then that CPU has some problem.
456  *
457  * as these watchdog NMI IRQs are generated on every CPU, we only
458  * have to check the current processor.
459  *
460  * since NMIs don't listen to _any_ locks, we have to be extremely
461  * careful not to rely on unsafe variables. The printk might lock
462  * up though, so we have to break up any console locks first ...
463  * [when there will be more tty-related locks, break them up
464  *  here too!]
465  */
466
467 static unsigned int
468         last_irq_sums [NR_CPUS],
469         alert_counter [NR_CPUS];
470
471 void touch_nmi_watchdog (void)
472 {
473         int i;
474
475         /*
476          * Just reset the alert counters, (other CPUs might be
477          * spinning on locks we hold):
478          */
479         for (i = 0; i < NR_CPUS; i++)
480                 alert_counter[i] = 0;
481
482         /*
483          * Tickle the softlockup detector too:
484          */
485         touch_softlockup_watchdog();
486 }
487
488 extern void die_nmi(struct pt_regs *, const char *msg);
489
490 void nmi_watchdog_tick (struct pt_regs * regs)
491 {
492
493         /*
494          * Since current_thread_info()-> is always on the stack, and we
495          * always switch the stack NMI-atomically, it's safe to use
496          * smp_processor_id().
497          */
498         int sum, cpu = smp_processor_id();
499
500         sum = per_cpu(irq_stat, cpu).apic_timer_irqs;
501
502         if (last_irq_sums[cpu] == sum) {
503                 /*
504                  * Ayiee, looks like this CPU is stuck ...
505                  * wait a few IRQs (5 seconds) before doing the oops ...
506                  */
507                 alert_counter[cpu]++;
508                 if (alert_counter[cpu] == 5*nmi_hz)
509                         /*
510                          * die_nmi will return ONLY if NOTIFY_STOP happens..
511                          */
512                         die_nmi(regs, "NMI Watchdog detected LOCKUP");
513
514                 last_irq_sums[cpu] = sum;
515                 alert_counter[cpu] = 0;
516         }
517         if (nmi_perfctr_msr) {
518                 if (nmi_perfctr_msr == MSR_P4_IQ_COUNTER0) {
519                         /*
520                          * P4 quirks:
521                          * - An overflown perfctr will assert its interrupt
522                          *   until the OVF flag in its CCCR is cleared.
523                          * - LVTPC is masked on interrupt and must be
524                          *   unmasked by the LVTPC handler.
525                          */
526                         wrmsr(MSR_P4_IQ_CCCR0, nmi_p4_cccr_val, 0);
527                         apic_write(APIC_LVTPC, APIC_DM_NMI);
528                 }
529                 else if (nmi_perfctr_msr == MSR_P6_PERFCTR0) {
530                         /* Only P6 based Pentium M need to re-unmask
531                          * the apic vector but it doesn't hurt
532                          * other P6 variant */
533                         apic_write(APIC_LVTPC, APIC_DM_NMI);
534                 }
535                 write_watchdog_counter(NULL);
536         }
537 }
538
539 #ifdef CONFIG_SYSCTL
540
541 static int unknown_nmi_panic_callback(struct pt_regs *regs, int cpu)
542 {
543         unsigned char reason = get_nmi_reason();
544         char buf[64];
545
546         if (!(reason & 0xc0)) {
547                 sprintf(buf, "NMI received for unknown reason %02x\n", reason);
548                 die_nmi(regs, buf);
549         }
550         return 0;
551 }
552
553 /*
554  * proc handler for /proc/sys/kernel/unknown_nmi_panic
555  */
556 int proc_unknown_nmi_panic(ctl_table *table, int write, struct file *file,
557                         void __user *buffer, size_t *length, loff_t *ppos)
558 {
559         int old_state;
560
561         old_state = unknown_nmi_panic;
562         proc_dointvec(table, write, file, buffer, length, ppos);
563         if (!!old_state == !!unknown_nmi_panic)
564                 return 0;
565
566         if (unknown_nmi_panic) {
567                 if (reserve_lapic_nmi() < 0) {
568                         unknown_nmi_panic = 0;
569                         return -EBUSY;
570                 } else {
571                         set_nmi_callback(unknown_nmi_panic_callback);
572                 }
573         } else {
574                 release_lapic_nmi();
575                 unset_nmi_callback();
576         }
577         return 0;
578 }
579
580 #endif
581
582 EXPORT_SYMBOL(nmi_active);
583 EXPORT_SYMBOL(nmi_watchdog);
584 EXPORT_SYMBOL(reserve_lapic_nmi);
585 EXPORT_SYMBOL(release_lapic_nmi);
586 EXPORT_SYMBOL(disable_timer_nmi_watchdog);
587 EXPORT_SYMBOL(enable_timer_nmi_watchdog);