arch/cris/arch-v32/mach-a3/arbiter.c

   1 /*
   2  * Memory arbiter functions. Allocates bandwidth through the
   3  * arbiter and sets up arbiter breakpoints.
   4  *
   5  * The algorithm first assigns slots to the clients that has specified
   6  * bandwidth (e.g. ethernet) and then the remaining slots are divided
   7  * on all the active clients.
   8  *
   9  * Copyright (c) 2004-2007 Axis Communications AB.
  10  *
  11  * The artpec-3 has two arbiters. The memory hierarchy looks like this:
  12  *
  13  *
  14  * CPU DMAs
  15  *  |   |
  16  *  |   |
  17  * --------------    ------------------
  18  * | foo arbiter|----| Internal memory|
  19  * --------------    ------------------
  20  *      |
  21  * --------------
  22  * | L2 cache   |
  23  * --------------
  24  *             |
  25  * h264 etc    |
  26  *    |        |
  27  *    |        |
  28  * --------------
  29  * | bar arbiter|
  30  * --------------
  31  *       |
  32  * ---------
  33  * | SDRAM |
  34  * ---------
  35  *
  36  */
  37
  38 #include <hwregs/reg_map.h>
  39 #include <hwregs/reg_rdwr.h>
  40 #include <hwregs/marb_foo_defs.h>
  41 #include <hwregs/marb_bar_defs.h>
  42 #include <arbiter.h>
  43 #include <hwregs/intr_vect.h>
  44 #include <linux/interrupt.h>
  45 #include <linux/irq.h>
  46 #include <linux/signal.h>
  47 #include <linux/errno.h>
  48 #include <linux/spinlock.h>
  49 #include <asm/io.h>
  50 #include <asm/irq_regs.h>
  51
  52 #define D(x)
  53
  54 struct crisv32_watch_entry {
  55   unsigned long instance;
  56   watch_callback *cb;
  57   unsigned long start;
  58   unsigned long end;
  59   int used;
  60 };
  61
  62 #define NUMBER_OF_BP 4
  63 #define SDRAM_BANDWIDTH 400000000
  64 #define INTMEM_BANDWIDTH 400000000
  65 #define NBR_OF_SLOTS 64
  66 #define NBR_OF_REGIONS 2
  67 #define NBR_OF_CLIENTS 15
  68 #define ARBITERS 2
  69 #define UNASSIGNED 100
  70
  71 struct arbiter {
  72   unsigned long instance;
  73   int nbr_regions;
  74   int nbr_clients;
  75   int requested_slots[NBR_OF_REGIONS][NBR_OF_CLIENTS];
  76   int active_clients[NBR_OF_REGIONS][NBR_OF_CLIENTS];
  77 };
  78
  79 static struct crisv32_watch_entry watches[ARBITERS][NUMBER_OF_BP] =
  80 {
  81   {
  82   {regi_marb_foo_bp0},
  83   {regi_marb_foo_bp1},
  84   {regi_marb_foo_bp2},
  85   {regi_marb_foo_bp3}
  86   },
  87   {
  88   {regi_marb_bar_bp0},
  89   {regi_marb_bar_bp1},
  90   {regi_marb_bar_bp2},
  91   {regi_marb_bar_bp3}
  92   }
  93 };
  94
  95 struct arbiter arbiters[ARBITERS] =
  96 {
  97   { /* L2 cache arbiter */
  98     .instance = regi_marb_foo,
  99     .nbr_regions = 2,
 100     .nbr_clients = 15
 101   },
 102   { /* DDR2 arbiter */
 103     .instance = regi_marb_bar,
 104     .nbr_regions = 1,
 105     .nbr_clients = 9
 106   }
 107 };
 108
 109 static int max_bandwidth[NBR_OF_REGIONS] = {SDRAM_BANDWIDTH, INTMEM_BANDWIDTH};
 110
 111 DEFINE_SPINLOCK(arbiter_lock);
 112
 113 static irqreturn_t
 114 crisv32_foo_arbiter_irq(int irq, void *dev_id);
 115 static irqreturn_t
 116 crisv32_bar_arbiter_irq(int irq, void *dev_id);
 117
 118 /*
 119  * "I'm the arbiter, I know the score.
 120  *  From square one I'll be watching all 64."
 121  * (memory arbiter slots, that is)
 122  *
 123  *  Or in other words:
 124  * Program the memory arbiter slots for "region" according to what's
 125  * in requested_slots[] and active_clients[], while minimizing
 126  * latency. A caller may pass a non-zero positive amount for
 127  * "unused_slots", which must then be the unallocated, remaining
 128  * number of slots, free to hand out to any client.
 129  */
 130
 131 static void crisv32_arbiter_config(int arbiter, int region, int unused_slots)
 132 {
 133         int slot;
 134         int client;
 135         int interval = 0;
 136
 137         /*
 138          * This vector corresponds to the hardware arbiter slots (see
 139          * the hardware documentation for semantics). We initialize
 140          * each slot with a suitable sentinel value outside the valid
 141          * range {0 .. NBR_OF_CLIENTS - 1} and replace them with
 142          * client indexes. Then it's fed to the hardware.
 143          */
 144         s8 val[NBR_OF_SLOTS];
 145
 146         for (slot = 0; slot < NBR_OF_SLOTS; slot++)
 147             val[slot] = -1;
 148
 149         for (client = 0; client < arbiters[arbiter].nbr_clients; client++) {
 150             int pos;
 151             /* Allocate the requested non-zero number of slots, but
 152              * also give clients with zero-requests one slot each
 153              * while stocks last. We do the latter here, in client
 154              * order. This makes sure zero-request clients are the
 155              * first to get to any spare slots, else those slots
 156              * could, when bandwidth is allocated close to the limit,
 157              * all be allocated to low-index non-zero-request clients
 158              * in the default-fill loop below. Another positive but
 159              * secondary effect is a somewhat better spread of the
 160              * zero-bandwidth clients in the vector, avoiding some of
 161              * the latency that could otherwise be caused by the
 162              * partitioning of non-zero-bandwidth clients at low
 163              * indexes and zero-bandwidth clients at high
 164              * indexes. (Note that this spreading can only affect the
 165              * unallocated bandwidth.)  All the above only matters for
 166              * memory-intensive situations, of course.
 167              */
 168             if (!arbiters[arbiter].requested_slots[region][client]) {
 169                 /*
 170                  * Skip inactive clients. Also skip zero-slot
 171                  * allocations in this pass when there are no known
 172                  * free slots.
 173                  */
 174                 if (!arbiters[arbiter].active_clients[region][client] ||
 175                                 unused_slots <= 0)
 176                         continue;
 177
 178                 unused_slots--;
 179
 180                 /* Only allocate one slot for this client. */
 181                 interval = NBR_OF_SLOTS;
 182             } else
 183                 interval = NBR_OF_SLOTS /
 184                         arbiters[arbiter].requested_slots[region][client];
 185
 186             pos = 0;
 187             while (pos < NBR_OF_SLOTS) {
 188                 if (val[pos] >= 0)
 189                    pos++;
 190                 else {
 191                         val[pos] = client;
 192                         pos += interval;
 193                 }
 194             }
 195         }
 196
 197         client = 0;
 198         for (slot = 0; slot < NBR_OF_SLOTS; slot++) {
 199                 /*
 200                  * Allocate remaining slots in round-robin
 201                  * client-number order for active clients. For this
 202                  * pass, we ignore requested bandwidth and previous
 203                  * allocations.
 204                  */
 205                 if (val[slot] < 0) {
 206                         int first = client;
 207                         while (!arbiters[arbiter].active_clients[region][client]) {
 208                                 client = (client + 1) %
 209                                         arbiters[arbiter].nbr_clients;
 210                                 if (client == first)
 211                                    break;
 212                         }
 213                         val[slot] = client;
 214                         client = (client + 1) % arbiters[arbiter].nbr_clients;
 215                 }
 216                 if (arbiter == 0) {
 217                         if (region == EXT_REGION)
 218                                 REG_WR_INT_VECT(marb_foo, regi_marb_foo,
 219                                         rw_l2_slots, slot, val[slot]);
 220                         else if (region == INT_REGION)
 221                                 REG_WR_INT_VECT(marb_foo, regi_marb_foo,
 222                                         rw_intm_slots, slot, val[slot]);
 223                 } else {
 224                         REG_WR_INT_VECT(marb_bar, regi_marb_bar,
 225                                 rw_ddr2_slots, slot, val[slot]);
 226                 }
 227         }
 228 }
 229
 230 extern char _stext, _etext;
 231
 232 static void crisv32_arbiter_init(void)
 233 {
 234         static int initialized;
 235
 236         if (initialized)
 237                 return;
 238
 239         initialized = 1;
 240
 241         /*
 242          * CPU caches are always set to active, but with zero
 243          * bandwidth allocated. It should be ok to allocate zero
 244          * bandwidth for the caches, because DMA for other channels
 245          * will supposedly finish, once their programmed amount is
 246          * done, and then the caches will get access according to the
 247          * "fixed scheme" for unclaimed slots. Though, if for some
 248          * use-case somewhere, there's a maximum CPU latency for
 249          * e.g. some interrupt, we have to start allocating specific
 250          * bandwidth for the CPU caches too.
 251          */
 252         arbiters[0].active_clients[EXT_REGION][11] = 1;
 253         arbiters[0].active_clients[EXT_REGION][12] = 1;
 254         crisv32_arbiter_config(0, EXT_REGION, 0);
 255         crisv32_arbiter_config(0, INT_REGION, 0);
 256         crisv32_arbiter_config(1, EXT_REGION, 0);
 257
 258         if (request_irq(MEMARB_FOO_INTR_VECT, crisv32_foo_arbiter_irq,
 259                         IRQF_DISABLED, "arbiter", NULL))
 260                 printk(KERN_ERR "Couldn't allocate arbiter IRQ\n");
 261
 262         if (request_irq(MEMARB_BAR_INTR_VECT, crisv32_bar_arbiter_irq,
 263                         IRQF_DISABLED, "arbiter", NULL))
 264                 printk(KERN_ERR "Couldn't allocate arbiter IRQ\n");
 265
 266 #ifndef CONFIG_ETRAX_KGDB
 267         /* Global watch for writes to kernel text segment. */
 268         crisv32_arbiter_watch(virt_to_phys(&_stext), &_etext - &_stext,
 269                 MARB_CLIENTS(arbiter_all_clients, arbiter_bar_all_clients),
 270                               arbiter_all_write, NULL);
 271 #endif
 272
 273         /* Set up max burst sizes by default */
 274         REG_WR_INT(marb_bar, regi_marb_bar, rw_h264_rd_burst, 3);
 275         REG_WR_INT(marb_bar, regi_marb_bar, rw_h264_wr_burst, 3);
 276         REG_WR_INT(marb_bar, regi_marb_bar, rw_ccd_burst, 3);
 277         REG_WR_INT(marb_bar, regi_marb_bar, rw_vin_wr_burst, 3);
 278         REG_WR_INT(marb_bar, regi_marb_bar, rw_vin_rd_burst, 3);
 279         REG_WR_INT(marb_bar, regi_marb_bar, rw_sclr_rd_burst, 3);
 280         REG_WR_INT(marb_bar, regi_marb_bar, rw_vout_burst, 3);
 281         REG_WR_INT(marb_bar, regi_marb_bar, rw_sclr_fifo_burst, 3);
 282         REG_WR_INT(marb_bar, regi_marb_bar, rw_l2cache_burst, 3);
 283 }
 284
 285 int crisv32_arbiter_allocate_bandwidth(int client, int region,
 286                                       unsigned long bandwidth)
 287 {
 288         int i;
 289         int total_assigned = 0;
 290         int total_clients = 0;
 291         int req;
 292         int arbiter = 0;
 293
 294         crisv32_arbiter_init();
 295
 296         if (client & 0xffff0000) {
 297                 arbiter = 1;
 298                 client >>= 16;
 299         }
 300
 301         for (i = 0; i < arbiters[arbiter].nbr_clients; i++) {
 302                 total_assigned += arbiters[arbiter].requested_slots[region][i];
 303                 total_clients += arbiters[arbiter].active_clients[region][i];
 304         }
 305
 306         /* Avoid division by 0 for 0-bandwidth requests. */
 307         req = bandwidth == 0
 308                 ? 0 : NBR_OF_SLOTS / (max_bandwidth[region] / bandwidth);
 309
 310         /*
 311          * We make sure that there are enough slots only for non-zero
 312          * requests. Requesting 0 bandwidth *may* allocate slots,
 313          * though if all bandwidth is allocated, such a client won't
 314          * get any and will have to rely on getting memory access
 315          * according to the fixed scheme that's the default when one
 316          * of the slot-allocated clients doesn't claim their slot.
 317          */
 318         if (total_assigned + req > NBR_OF_SLOTS)
 319            return -ENOMEM;
 320
 321         arbiters[arbiter].active_clients[region][client] = 1;
 322         arbiters[arbiter].requested_slots[region][client] = req;
 323         crisv32_arbiter_config(arbiter, region, NBR_OF_SLOTS - total_assigned);
 324
 325         /* Propagate allocation from foo to bar */
 326         if (arbiter == 0)
 327                 crisv32_arbiter_allocate_bandwidth(8 << 16,
 328                         EXT_REGION, bandwidth);
 329         return 0;
 330 }
 331
 332 /*
 333  * Main entry for bandwidth deallocation.
 334  *
 335  * Strictly speaking, for a somewhat constant set of clients where
 336  * each client gets a constant bandwidth and is just enabled or
 337  * disabled (somewhat dynamically), no action is necessary here to
 338  * avoid starvation for non-zero-allocation clients, as the allocated
 339  * slots will just be unused. However, handing out those unused slots
 340  * to active clients avoids needless latency if the "fixed scheme"
 341  * would give unclaimed slots to an eager low-index client.
 342  */
 343
 344 void crisv32_arbiter_deallocate_bandwidth(int client, int region)
 345 {
 346         int i;
 347         int total_assigned = 0;
 348         int arbiter = 0;
 349
 350         if (client & 0xffff0000)
 351                 arbiter = 1;
 352
 353         arbiters[arbiter].requested_slots[region][client] = 0;
 354         arbiters[arbiter].active_clients[region][client] = 0;
 355
 356         for (i = 0; i < arbiters[arbiter].nbr_clients; i++)
 357                 total_assigned += arbiters[arbiter].requested_slots[region][i];
 358
 359         crisv32_arbiter_config(arbiter, region, NBR_OF_SLOTS - total_assigned);
 360 }
 361
 362 int crisv32_arbiter_watch(unsigned long start, unsigned long size,
 363                           unsigned long clients, unsigned long accesses,
 364                           watch_callback *cb)
 365 {
 366         int i;
 367         int arbiter;
 368         int used[2];
 369         int ret = 0;
 370
 371         crisv32_arbiter_init();
 372
 373         if (start > 0x80000000) {
 374                 printk(KERN_ERR "Arbiter: %lX doesn't look like a "
 375                         "physical address", start);
 376                 return -EFAULT;
 377         }
 378
 379         spin_lock(&arbiter_lock);
 380
 381         if (clients & 0xffff)
 382                 used[0] = 1;
 383         if (clients & 0xffff0000)
 384                 used[1] = 1;
 385
 386         for (arbiter = 0; arbiter < ARBITERS; arbiter++) {
 387                 if (!used[arbiter])
 388                         continue;
 389
 390                 for (i = 0; i < NUMBER_OF_BP; i++) {
 391                         if (!watches[arbiter][i].used) {
 392                                 unsigned intr_mask;
 393                                 if (arbiter)
 394                                         intr_mask = REG_RD_INT(marb_bar,
 395                                                 regi_marb_bar, rw_intr_mask);
 396                                 else
 397                                         intr_mask = REG_RD_INT(marb_foo,
 398                                                 regi_marb_foo, rw_intr_mask);
 399
 400                                 watches[arbiter][i].used = 1;
 401                                 watches[arbiter][i].start = start;
 402                                 watches[arbiter][i].end = start + size;
 403                                 watches[arbiter][i].cb = cb;
 404
 405                                 ret |= (i + 1) << (arbiter + 8);
 406                                 if (arbiter) {
 407                                         REG_WR_INT(marb_bar_bp,
 408                                                 watches[arbiter][i].instance,
 409                                                 rw_first_addr,
 410                                                 watches[arbiter][i].start);
 411                                         REG_WR_INT(marb_bar_bp,
 412                                                 watches[arbiter][i].instance,
 413                                                 rw_last_addr,
 414                                                 watches[arbiter][i].end);
 415                                         REG_WR_INT(marb_bar_bp,
 416                                                 watches[arbiter][i].instance,
 417                                                 rw_op, accesses);
 418                                         REG_WR_INT(marb_bar_bp,
 419                                                 watches[arbiter][i].instance,
 420                                                 rw_clients,
 421                                                 clients & 0xffff);
 422                                 } else {
 423                                         REG_WR_INT(marb_foo_bp,
 424                                                 watches[arbiter][i].instance,
 425                                                 rw_first_addr,
 426                                                 watches[arbiter][i].start);
 427                                         REG_WR_INT(marb_foo_bp,
 428                                                 watches[arbiter][i].instance,
 429                                                 rw_last_addr,
 430                                                 watches[arbiter][i].end);
 431                                         REG_WR_INT(marb_foo_bp,
 432                                                 watches[arbiter][i].instance,
 433                                                 rw_op, accesses);
 434                                         REG_WR_INT(marb_foo_bp,
 435                                                 watches[arbiter][i].instance,
 436                                                 rw_clients, clients >> 16);
 437                                 }
 438
 439                                 if (i == 0)
 440                                         intr_mask |= 1;
 441                                 else if (i == 1)
 442                                         intr_mask |= 2;
 443                                 else if (i == 2)
 444                                         intr_mask |= 4;
 445                                 else if (i == 3)
 446                                         intr_mask |= 8;
 447
 448                                 if (arbiter)
 449                                         REG_WR_INT(marb_bar, regi_marb_bar,
 450                                                 rw_intr_mask, intr_mask);
 451                                 else
 452                                         REG_WR_INT(marb_foo, regi_marb_foo,
 453                                                 rw_intr_mask, intr_mask);
 454
 455                                 spin_unlock(&arbiter_lock);
 456
 457                                 break;
 458                         }
 459                 }
 460         }
 461         spin_unlock(&arbiter_lock);
 462         if (ret)
 463                 return ret;
 464         else
 465                 return -ENOMEM;
 466 }
 467
 468 int crisv32_arbiter_unwatch(int id)
 469 {
 470         int arbiter;
 471         int intr_mask;
 472
 473         crisv32_arbiter_init();
 474
 475         spin_lock(&arbiter_lock);
 476
 477         for (arbiter = 0; arbiter < ARBITERS; arbiter++) {
 478                 int id2;
 479
 480                 if (arbiter)
 481                         intr_mask = REG_RD_INT(marb_bar, regi_marb_bar,
 482                                 rw_intr_mask);
 483                 else
 484                         intr_mask = REG_RD_INT(marb_foo, regi_marb_foo,
 485                                 rw_intr_mask);
 486
 487                 id2 = (id & (0xff << (arbiter + 8))) >> (arbiter + 8);
 488                 if (id2 == 0)
 489                         continue;
 490                 id2--;
 491                 if ((id2 >= NUMBER_OF_BP) || (!watches[arbiter][id2].used)) {
 492                         spin_unlock(&arbiter_lock);
 493                         return -EINVAL;
 494                 }
 495
 496                 memset(&watches[arbiter][id2], 0,
 497                         sizeof(struct crisv32_watch_entry));
 498
 499                 if (id2 == 0)
 500                         intr_mask &= ~1;
 501                 else if (id2 == 1)
 502                         intr_mask &= ~2;
 503                 else if (id2 == 2)
 504                         intr_mask &= ~4;
 505                 else if (id2 == 3)
 506                         intr_mask &= ~8;
 507
 508                 if (arbiter)
 509                         REG_WR_INT(marb_bar, regi_marb_bar, rw_intr_mask,
 510                                 intr_mask);
 511                 else
 512                         REG_WR_INT(marb_foo, regi_marb_foo, rw_intr_mask,
 513                                 intr_mask);
 514         }
 515
 516         spin_unlock(&arbiter_lock);
 517         return 0;
 518 }
 519
 520 extern void show_registers(struct pt_regs *regs);
 521
 522
 523 static irqreturn_t
 524 crisv32_foo_arbiter_irq(int irq, void *dev_id)
 525 {
 526         reg_marb_foo_r_masked_intr masked_intr =
 527                 REG_RD(marb_foo, regi_marb_foo, r_masked_intr);
 528         reg_marb_foo_bp_r_brk_clients r_clients;
 529         reg_marb_foo_bp_r_brk_addr r_addr;
 530         reg_marb_foo_bp_r_brk_op r_op;
 531         reg_marb_foo_bp_r_brk_first_client r_first;
 532         reg_marb_foo_bp_r_brk_size r_size;
 533         reg_marb_foo_bp_rw_ack ack = {0};
 534         reg_marb_foo_rw_ack_intr ack_intr = {
 535                 .bp0 = 1, .bp1 = 1, .bp2 = 1, .bp3 = 1
 536         };
 537         struct crisv32_watch_entry *watch;
 538         unsigned arbiter = (unsigned)dev_id;
 539
 540         masked_intr = REG_RD(marb_foo, regi_marb_foo, r_masked_intr);
 541
 542         if (masked_intr.bp0)
 543                 watch = &watches[arbiter][0];
 544         else if (masked_intr.bp1)
 545                 watch = &watches[arbiter][1];
 546         else if (masked_intr.bp2)
 547                 watch = &watches[arbiter][2];
 548         else if (masked_intr.bp3)
 549                 watch = &watches[arbiter][3];
 550         else
 551                 return IRQ_NONE;
 552
 553         /* Retrieve all useful information and print it. */
 554         r_clients = REG_RD(marb_foo_bp, watch->instance, r_brk_clients);
 555         r_addr = REG_RD(marb_foo_bp, watch->instance, r_brk_addr);
 556         r_op = REG_RD(marb_foo_bp, watch->instance, r_brk_op);
 557         r_first = REG_RD(marb_foo_bp, watch->instance, r_brk_first_client);
 558         r_size = REG_RD(marb_foo_bp, watch->instance, r_brk_size);
 559
 560         printk(KERN_DEBUG "Arbiter IRQ\n");
 561         printk(KERN_DEBUG "Clients %X addr %X op %X first %X size %X\n",
 562                REG_TYPE_CONV(int, reg_marb_foo_bp_r_brk_clients, r_clients),
 563                REG_TYPE_CONV(int, reg_marb_foo_bp_r_brk_addr, r_addr),
 564                REG_TYPE_CONV(int, reg_marb_foo_bp_r_brk_op, r_op),
 565                REG_TYPE_CONV(int, reg_marb_foo_bp_r_brk_first_client, r_first),
 566                REG_TYPE_CONV(int, reg_marb_foo_bp_r_brk_size, r_size));
 567
 568         REG_WR(marb_foo_bp, watch->instance, rw_ack, ack);
 569         REG_WR(marb_foo, regi_marb_foo, rw_ack_intr, ack_intr);
 570
 571         printk(KERN_DEBUG "IRQ occurred at %X\n", (unsigned)get_irq_regs());
 572
 573         if (watch->cb)
 574                 watch->cb();
 575
 576         return IRQ_HANDLED;
 577 }
 578
 579 static irqreturn_t
 580 crisv32_bar_arbiter_irq(int irq, void *dev_id)
 581 {
 582         reg_marb_bar_r_masked_intr masked_intr =
 583                 REG_RD(marb_bar, regi_marb_bar, r_masked_intr);
 584         reg_marb_bar_bp_r_brk_clients r_clients;
 585         reg_marb_bar_bp_r_brk_addr r_addr;
 586         reg_marb_bar_bp_r_brk_op r_op;
 587         reg_marb_bar_bp_r_brk_first_client r_first;
 588         reg_marb_bar_bp_r_brk_size r_size;
 589         reg_marb_bar_bp_rw_ack ack = {0};
 590         reg_marb_bar_rw_ack_intr ack_intr = {
 591                 .bp0 = 1, .bp1 = 1, .bp2 = 1, .bp3 = 1
 592         };
 593         struct crisv32_watch_entry *watch;
 594         unsigned arbiter = (unsigned)dev_id;
 595
 596         masked_intr = REG_RD(marb_bar, regi_marb_bar, r_masked_intr);
 597
 598         if (masked_intr.bp0)
 599                 watch = &watches[arbiter][0];
 600         else if (masked_intr.bp1)
 601                 watch = &watches[arbiter][1];
 602         else if (masked_intr.bp2)
 603                 watch = &watches[arbiter][2];
 604         else if (masked_intr.bp3)
 605                 watch = &watches[arbiter][3];
 606         else
 607                 return IRQ_NONE;
 608
 609         /* Retrieve all useful information and print it. */
 610         r_clients = REG_RD(marb_bar_bp, watch->instance, r_brk_clients);
 611         r_addr = REG_RD(marb_bar_bp, watch->instance, r_brk_addr);
 612         r_op = REG_RD(marb_bar_bp, watch->instance, r_brk_op);
 613         r_first = REG_RD(marb_bar_bp, watch->instance, r_brk_first_client);
 614         r_size = REG_RD(marb_bar_bp, watch->instance, r_brk_size);
 615
 616         printk(KERN_DEBUG "Arbiter IRQ\n");
 617         printk(KERN_DEBUG "Clients %X addr %X op %X first %X size %X\n",
 618                REG_TYPE_CONV(int, reg_marb_bar_bp_r_brk_clients, r_clients),
 619                REG_TYPE_CONV(int, reg_marb_bar_bp_r_brk_addr, r_addr),
 620                REG_TYPE_CONV(int, reg_marb_bar_bp_r_brk_op, r_op),
 621                REG_TYPE_CONV(int, reg_marb_bar_bp_r_brk_first_client, r_first),
 622                REG_TYPE_CONV(int, reg_marb_bar_bp_r_brk_size, r_size));
 623
 624         REG_WR(marb_bar_bp, watch->instance, rw_ack, ack);
 625         REG_WR(marb_bar, regi_marb_bar, rw_ack_intr, ack_intr);
 626
 627         printk(KERN_DEBUG "IRQ occurred at %X\n", (unsigned)get_irq_regs()->erp);
 628
 629         if (watch->cb)
 630                 watch->cb();
 631
 632         return IRQ_HANDLED;
 633 }
 634