arch/blackfin/mach-common/cpufreq.c

   1 /*
   2  * Blackfin core clock scaling
   3  *
   4  * Copyright 2008-2011 Analog Devices Inc.
   5  *
   6  * Licensed under the GPL-2 or later.
   7  */
   8
   9 #include <linux/kernel.h>
  10 #include <linux/types.h>
  11 #include <linux/init.h>
  12 #include <linux/cpufreq.h>
  13 #include <linux/fs.h>
  14 #include <linux/delay.h>
  15 #include <asm/blackfin.h>
  16 #include <asm/time.h>
  17 #include <asm/dpmc.h>
  18
  19 /* this is the table of CCLK frequencies, in Hz */
  20 /* .index is the entry in the auxiliary dpm_state_table[] */
  21 static struct cpufreq_frequency_table bfin_freq_table[] = {
  22         {
  23                 .frequency = CPUFREQ_TABLE_END,
  24                 .index = 0,
  25         },
  26         {
  27                 .frequency = CPUFREQ_TABLE_END,
  28                 .index = 1,
  29         },
  30         {
  31                 .frequency = CPUFREQ_TABLE_END,
  32                 .index = 2,
  33         },
  34         {
  35                 .frequency = CPUFREQ_TABLE_END,
  36                 .index = 0,
  37         },
  38 };
  39
  40 static struct bfin_dpm_state {
  41         unsigned int csel; /* system clock divider */
  42         unsigned int tscale; /* change the divider on the core timer interrupt */
  43 } dpm_state_table[3];
  44
  45 #if defined(CONFIG_CYCLES_CLOCKSOURCE)
  46 /*
  47  * normalized to maximum frequency offset for CYCLES,
  48  * used in time-ts cycles clock source, but could be used
  49  * somewhere also.
  50  */
  51 unsigned long long __bfin_cycles_off;
  52 unsigned int __bfin_cycles_mod;
  53 #endif
  54
  55 /**************************************************************************/
  56 static void __init bfin_init_tables(unsigned long cclk, unsigned long sclk)
  57 {
  58
  59         unsigned long csel, min_cclk;
  60         int index;
  61
  62         /* Anomaly 273 seems to still exist on non-BF54x w/dcache turned on */
  63 #if ANOMALY_05000273 || ANOMALY_05000274 || \
  64         (!defined(CONFIG_BF54x) && defined(CONFIG_BFIN_EXTMEM_DCACHEABLE))
  65         min_cclk = sclk * 2;
  66 #else
  67         min_cclk = sclk;
  68 #endif
  69         csel = ((bfin_read_PLL_DIV() & CSEL) >> 4);
  70
  71         for (index = 0;  (cclk >> index) >= min_cclk && csel <= 3; index++, csel++) {
  72                 bfin_freq_table[index].frequency = cclk >> index;
  73                 dpm_state_table[index].csel = csel << 4; /* Shift now into PLL_DIV bitpos */
  74                 dpm_state_table[index].tscale =  (TIME_SCALE / (1 << csel)) - 1;
  75
  76                 pr_debug("cpufreq: freq:%d csel:0x%x tscale:%d\n",
  77                                                  bfin_freq_table[index].frequency,
  78                                                  dpm_state_table[index].csel,
  79                                                  dpm_state_table[index].tscale);
  80         }
  81         return;
  82 }
  83
  84 static void bfin_adjust_core_timer(void *info)
  85 {
  86         unsigned int tscale;
  87         unsigned int index = *(unsigned int *)info;
  88
  89         /* we have to adjust the core timer, because it is using cclk */
  90         tscale = dpm_state_table[index].tscale;
  91         bfin_write_TSCALE(tscale);
  92         return;
  93 }
  94
  95 static unsigned int bfin_getfreq_khz(unsigned int cpu)
  96 {
  97         /* Both CoreA/B have the same core clock */
  98         return get_cclk() / 1000;
  99 }
 100
 101 static int bfin_target(struct cpufreq_policy *poli,
 102                         unsigned int target_freq, unsigned int relation)
 103 {
 104         unsigned int index, plldiv, cpu;
 105         unsigned long flags, cclk_hz;
 106         struct cpufreq_freqs freqs;
 107         static unsigned long lpj_ref;
 108         static unsigned int  lpj_ref_freq;
 109
 110 #if defined(CONFIG_CYCLES_CLOCKSOURCE)
 111         cycles_t cycles;
 112 #endif
 113
 114         for_each_online_cpu(cpu) {
 115                 struct cpufreq_policy *policy = cpufreq_cpu_get(cpu);
 116
 117                 if (!policy)
 118                         continue;
 119
 120                 if (cpufreq_frequency_table_target(policy, bfin_freq_table,
 121                                  target_freq, relation, &index))
 122                         return -EINVAL;
 123
 124                 cclk_hz = bfin_freq_table[index].frequency;
 125
 126                 freqs.old = bfin_getfreq_khz(0);
 127                 freqs.new = cclk_hz;
 128                 freqs.cpu = cpu;
 129
 130                 pr_debug("cpufreq: changing cclk to %lu; target = %u, oldfreq = %u\n",
 131                          cclk_hz, target_freq, freqs.old);
 132
 133                 cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
 134                 if (cpu == CPUFREQ_CPU) {
 135                         flags = hard_local_irq_save();
 136                         plldiv = (bfin_read_PLL_DIV() & SSEL) |
 137                                                 dpm_state_table[index].csel;
 138                         bfin_write_PLL_DIV(plldiv);
 139                         on_each_cpu(bfin_adjust_core_timer, &index, 1);
 140 #if defined(CONFIG_CYCLES_CLOCKSOURCE)
 141                         cycles = get_cycles();
 142                         SSYNC();
 143                         cycles += 10; /* ~10 cycles we lose after get_cycles() */
 144                         __bfin_cycles_off +=
 145                             (cycles << __bfin_cycles_mod) - (cycles << index);
 146                         __bfin_cycles_mod = index;
 147 #endif
 148                         if (!lpj_ref_freq) {
 149                                 lpj_ref = loops_per_jiffy;
 150                                 lpj_ref_freq = freqs.old;
 151                         }
 152                         if (freqs.new != freqs.old) {
 153                                 loops_per_jiffy = cpufreq_scale(lpj_ref,
 154                                                 lpj_ref_freq, freqs.new);
 155                         }
 156                         hard_local_irq_restore(flags);
 157                 }
 158                 /* TODO: just test case for cycles clock source, remove later */
 159                 cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
 160         }
 161
 162         pr_debug("cpufreq: done\n");
 163         return 0;
 164 }
 165
 166 static int bfin_verify_speed(struct cpufreq_policy *policy)
 167 {
 168         return cpufreq_frequency_table_verify(policy, bfin_freq_table);
 169 }
 170
 171 static int __init __bfin_cpu_init(struct cpufreq_policy *policy)
 172 {
 173
 174         unsigned long cclk, sclk;
 175
 176         cclk = get_cclk() / 1000;
 177         sclk = get_sclk() / 1000;
 178
 179         if (policy->cpu == CPUFREQ_CPU)
 180                 bfin_init_tables(cclk, sclk);
 181
 182         policy->cpuinfo.transition_latency = 50000; /* 50us assumed */
 183
 184         policy->cur = cclk;
 185         cpufreq_frequency_table_get_attr(bfin_freq_table, policy->cpu);
 186         return cpufreq_frequency_table_cpuinfo(policy, bfin_freq_table);
 187 }
 188
 189 static struct freq_attr *bfin_freq_attr[] = {
 190         &cpufreq_freq_attr_scaling_available_freqs,
 191         NULL,
 192 };
 193
 194 static struct cpufreq_driver bfin_driver = {
 195         .verify = bfin_verify_speed,
 196         .target = bfin_target,
 197         .get = bfin_getfreq_khz,
 198         .init = __bfin_cpu_init,
 199         .name = "bfin cpufreq",
 200         .owner = THIS_MODULE,
 201         .attr = bfin_freq_attr,
 202 };
 203
 204 static int __init bfin_cpu_init(void)
 205 {
 206         return cpufreq_register_driver(&bfin_driver);
 207 }
 208
 209 static void __exit bfin_cpu_exit(void)
 210 {
 211         cpufreq_unregister_driver(&bfin_driver);
 212 }
 213
 214 MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
 215 MODULE_DESCRIPTION("cpufreq driver for Blackfin");
 216 MODULE_LICENSE("GPL");
 217
 218 module_init(bfin_cpu_init);
 219 module_exit(bfin_cpu_exit);