arch/blackfin/mach-bf561/boards/ezkit.c

   1 /*
   2  * Copyright 2004-2009 Analog Devices Inc.
   3  *               2005 National ICT Australia (NICTA)
   4  *                    Aidan Williams <aidan@nicta.com.au>
   5  *
   6  * Licensed under the GPL-2 or later.
   7  */
   8
   9 #include <linux/device.h>
  10 #include <linux/platform_device.h>
  11 #include <linux/mtd/mtd.h>
  12 #include <linux/mtd/partitions.h>
  13 #include <linux/mtd/physmap.h>
  14 #include <linux/spi/spi.h>
  15 #include <linux/irq.h>
  16 #include <linux/interrupt.h>
  17 #include <asm/dma.h>
  18 #include <asm/bfin5xx_spi.h>
  19 #include <asm/portmux.h>
  20 #include <asm/dpmc.h>
  21
  22 /*
  23  * Name the Board for the /proc/cpuinfo
  24  */
  25 const char bfin_board_name[] = "ADI BF561-EZKIT";
  26
  27 #if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
  28 #include <linux/usb/isp1760.h>
  29 static struct resource bfin_isp1760_resources[] = {
  30         [0] = {
  31                 .start  = 0x2C0F0000,
  32                 .end    = 0x203C0000 + 0xfffff,
  33                 .flags  = IORESOURCE_MEM,
  34         },
  35         [1] = {
  36                 .start  = IRQ_PF10,
  37                 .end    = IRQ_PF10,
  38                 .flags  = IORESOURCE_IRQ,
  39         },
  40 };
  41
  42 static struct isp1760_platform_data isp1760_priv = {
  43         .is_isp1761 = 0,
  44         .bus_width_16 = 1,
  45         .port1_otg = 0,
  46         .analog_oc = 0,
  47         .dack_polarity_high = 0,
  48         .dreq_polarity_high = 0,
  49 };
  50
  51 static struct platform_device bfin_isp1760_device = {
  52         .name           = "isp1760",
  53         .id             = 0,
  54         .dev = {
  55                 .platform_data = &isp1760_priv,
  56         },
  57         .num_resources  = ARRAY_SIZE(bfin_isp1760_resources),
  58         .resource       = bfin_isp1760_resources,
  59 };
  60 #endif
  61
  62 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
  63 #include <linux/usb/isp1362.h>
  64
  65 static struct resource isp1362_hcd_resources[] = {
  66         {
  67                 .start = 0x2c060000,
  68                 .end = 0x2c060000,
  69                 .flags = IORESOURCE_MEM,
  70         }, {
  71                 .start = 0x2c060004,
  72                 .end = 0x2c060004,
  73                 .flags = IORESOURCE_MEM,
  74         }, {
  75                 .start = IRQ_PF8,
  76                 .end = IRQ_PF8,
  77                 .flags = IORESOURCE_IRQ,
  78         },
  79 };
  80
  81 static struct isp1362_platform_data isp1362_priv = {
  82         .sel15Kres = 1,
  83         .clknotstop = 0,
  84         .oc_enable = 0,
  85         .int_act_high = 0,
  86         .int_edge_triggered = 0,
  87         .remote_wakeup_connected = 0,
  88         .no_power_switching = 1,
  89         .power_switching_mode = 0,
  90 };
  91
  92 static struct platform_device isp1362_hcd_device = {
  93         .name = "isp1362-hcd",
  94         .id = 0,
  95         .dev = {
  96                 .platform_data = &isp1362_priv,
  97         },
  98         .num_resources = ARRAY_SIZE(isp1362_hcd_resources),
  99         .resource = isp1362_hcd_resources,
 100 };
 101 #endif
 102
 103 #if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
 104 static struct resource net2272_bfin_resources[] = {
 105         {
 106                 .start = 0x2C000000,
 107                 .end = 0x2C000000 + 0x7F,
 108                 .flags = IORESOURCE_MEM,
 109         }, {
 110                 .start = IRQ_PF10,
 111                 .end = IRQ_PF10,
 112                 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
 113         },
 114 };
 115
 116 static struct platform_device net2272_bfin_device = {
 117         .name = "net2272",
 118         .id = -1,
 119         .num_resources = ARRAY_SIZE(net2272_bfin_resources),
 120         .resource = net2272_bfin_resources,
 121 };
 122 #endif
 123
 124 /*
 125  *  USB-LAN EzExtender board
 126  *  Driver needs to know address, irq and flag pin.
 127  */
 128 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
 129 #include <linux/smc91x.h>
 130
 131 static struct smc91x_platdata smc91x_info = {
 132         .flags = SMC91X_USE_32BIT | SMC91X_NOWAIT,
 133         .leda = RPC_LED_100_10,
 134         .ledb = RPC_LED_TX_RX,
 135 };
 136
 137 static struct resource smc91x_resources[] = {
 138         {
 139                 .name = "smc91x-regs",
 140                 .start = 0x2C010300,
 141                 .end = 0x2C010300 + 16,
 142                 .flags = IORESOURCE_MEM,
 143         }, {
 144
 145                 .start = IRQ_PF9,
 146                 .end = IRQ_PF9,
 147                 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
 148         },
 149 };
 150
 151 static struct platform_device smc91x_device = {
 152         .name = "smc91x",
 153         .id = 0,
 154         .num_resources = ARRAY_SIZE(smc91x_resources),
 155         .resource = smc91x_resources,
 156         .dev    = {
 157                 .platform_data  = &smc91x_info,
 158         },
 159 };
 160 #endif
 161
 162 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
 163 #ifdef CONFIG_SERIAL_BFIN_UART0
 164 static struct resource bfin_uart0_resources[] = {
 165         {
 166                 .start = BFIN_UART_THR,
 167                 .end = BFIN_UART_GCTL+2,
 168                 .flags = IORESOURCE_MEM,
 169         },
 170         {
 171                 .start = IRQ_UART_RX,
 172                 .end = IRQ_UART_RX+1,
 173                 .flags = IORESOURCE_IRQ,
 174         },
 175         {
 176                 .start = IRQ_UART_ERROR,
 177                 .end = IRQ_UART_ERROR,
 178                 .flags = IORESOURCE_IRQ,
 179         },
 180         {
 181                 .start = CH_UART_TX,
 182                 .end = CH_UART_TX,
 183                 .flags = IORESOURCE_DMA,
 184         },
 185         {
 186                 .start = CH_UART_RX,
 187                 .end = CH_UART_RX,
 188                 .flags = IORESOURCE_DMA,
 189         },
 190 };
 191
 192 unsigned short bfin_uart0_peripherals[] = {
 193         P_UART0_TX, P_UART0_RX, 0
 194 };
 195
 196 static struct platform_device bfin_uart0_device = {
 197         .name = "bfin-uart",
 198         .id = 0,
 199         .num_resources = ARRAY_SIZE(bfin_uart0_resources),
 200         .resource = bfin_uart0_resources,
 201         .dev = {
 202                 .platform_data = &bfin_uart0_peripherals, /* Passed to driver */
 203         },
 204 };
 205 #endif
 206 #endif
 207
 208 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
 209 #ifdef CONFIG_BFIN_SIR0
 210 static struct resource bfin_sir0_resources[] = {
 211         {
 212                 .start = 0xFFC00400,
 213                 .end = 0xFFC004FF,
 214                 .flags = IORESOURCE_MEM,
 215         },
 216         {
 217                 .start = IRQ_UART0_RX,
 218                 .end = IRQ_UART0_RX+1,
 219                 .flags = IORESOURCE_IRQ,
 220         },
 221         {
 222                 .start = CH_UART0_RX,
 223                 .end = CH_UART0_RX+1,
 224                 .flags = IORESOURCE_DMA,
 225         },
 226 };
 227
 228 static struct platform_device bfin_sir0_device = {
 229         .name = "bfin_sir",
 230         .id = 0,
 231         .num_resources = ARRAY_SIZE(bfin_sir0_resources),
 232         .resource = bfin_sir0_resources,
 233 };
 234 #endif
 235 #endif
 236
 237 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
 238 static struct mtd_partition ezkit_partitions[] = {
 239         {
 240                 .name       = "bootloader(nor)",
 241                 .size       = 0x40000,
 242                 .offset     = 0,
 243         }, {
 244                 .name       = "linux kernel(nor)",
 245                 .size       = 0x1C0000,
 246                 .offset     = MTDPART_OFS_APPEND,
 247         }, {
 248                 .name       = "file system(nor)",
 249                 .size       = MTDPART_SIZ_FULL,
 250                 .offset     = MTDPART_OFS_APPEND,
 251         }
 252 };
 253
 254 static struct physmap_flash_data ezkit_flash_data = {
 255         .width      = 2,
 256         .parts      = ezkit_partitions,
 257         .nr_parts   = ARRAY_SIZE(ezkit_partitions),
 258 };
 259
 260 static struct resource ezkit_flash_resource = {
 261         .start = 0x20000000,
 262         .end   = 0x207fffff,
 263         .flags = IORESOURCE_MEM,
 264 };
 265
 266 static struct platform_device ezkit_flash_device = {
 267         .name          = "physmap-flash",
 268         .id            = 0,
 269         .dev = {
 270                 .platform_data = &ezkit_flash_data,
 271         },
 272         .num_resources = 1,
 273         .resource      = &ezkit_flash_resource,
 274 };
 275 #endif
 276
 277 #if defined(CONFIG_SND_BLACKFIN_AD183X) \
 278         || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE)
 279 static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
 280         .enable_dma = 0,
 281         .bits_per_word = 16,
 282 };
 283 #endif
 284
 285 #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
 286 static struct bfin5xx_spi_chip spidev_chip_info = {
 287         .enable_dma = 0,
 288         .bits_per_word = 8,
 289 };
 290 #endif
 291
 292 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
 293 /* SPI (0) */
 294 static struct resource bfin_spi0_resource[] = {
 295         [0] = {
 296                 .start = SPI0_REGBASE,
 297                 .end   = SPI0_REGBASE + 0xFF,
 298                 .flags = IORESOURCE_MEM,
 299         },
 300         [1] = {
 301                 .start = CH_SPI,
 302                 .end   = CH_SPI,
 303                 .flags = IORESOURCE_DMA,
 304         },
 305         [2] = {
 306                 .start = IRQ_SPI,
 307                 .end   = IRQ_SPI,
 308                 .flags = IORESOURCE_IRQ,
 309         }
 310 };
 311
 312 /* SPI controller data */
 313 static struct bfin5xx_spi_master bfin_spi0_info = {
 314         .num_chipselect = 8,
 315         .enable_dma = 1,  /* master has the ability to do dma transfer */
 316         .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
 317 };
 318
 319 static struct platform_device bfin_spi0_device = {
 320         .name = "bfin-spi",
 321         .id = 0, /* Bus number */
 322         .num_resources = ARRAY_SIZE(bfin_spi0_resource),
 323         .resource = bfin_spi0_resource,
 324         .dev = {
 325                 .platform_data = &bfin_spi0_info, /* Passed to driver */
 326         },
 327 };
 328 #endif
 329
 330 static struct spi_board_info bfin_spi_board_info[] __initdata = {
 331 #if defined(CONFIG_SND_BLACKFIN_AD183X) \
 332         || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE)
 333         {
 334                 .modalias = "ad1836",
 335                 .max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
 336                 .bus_num = 0,
 337                 .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
 338                 .controller_data = &ad1836_spi_chip_info,
 339         },
 340 #endif
 341 #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
 342         {
 343                 .modalias = "spidev",
 344                 .max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
 345                 .bus_num = 0,
 346                 .chip_select = 1,
 347                 .controller_data = &spidev_chip_info,
 348         },
 349 #endif
 350 };
 351
 352 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 353 #include <linux/input.h>
 354 #include <linux/gpio_keys.h>
 355
 356 static struct gpio_keys_button bfin_gpio_keys_table[] = {
 357         {BTN_0, GPIO_PF5, 1, "gpio-keys: BTN0"},
 358         {BTN_1, GPIO_PF6, 1, "gpio-keys: BTN1"},
 359         {BTN_2, GPIO_PF7, 1, "gpio-keys: BTN2"},
 360         {BTN_3, GPIO_PF8, 1, "gpio-keys: BTN3"},
 361 };
 362
 363 static struct gpio_keys_platform_data bfin_gpio_keys_data = {
 364         .buttons        = bfin_gpio_keys_table,
 365         .nbuttons       = ARRAY_SIZE(bfin_gpio_keys_table),
 366 };
 367
 368 static struct platform_device bfin_device_gpiokeys = {
 369         .name      = "gpio-keys",
 370         .dev = {
 371                 .platform_data = &bfin_gpio_keys_data,
 372         },
 373 };
 374 #endif
 375
 376 #if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
 377 #include <linux/i2c-gpio.h>
 378
 379 static struct i2c_gpio_platform_data i2c_gpio_data = {
 380         .sda_pin                = 1,
 381         .scl_pin                = 0,
 382         .sda_is_open_drain      = 0,
 383         .scl_is_open_drain      = 0,
 384         .udelay                 = 40,
 385 };
 386
 387 static struct platform_device i2c_gpio_device = {
 388         .name           = "i2c-gpio",
 389         .id             = 0,
 390         .dev            = {
 391                 .platform_data  = &i2c_gpio_data,
 392         },
 393 };
 394 #endif
 395
 396 static const unsigned int cclk_vlev_datasheet[] =
 397 {
 398         VRPAIR(VLEV_085, 250000000),
 399         VRPAIR(VLEV_090, 300000000),
 400         VRPAIR(VLEV_095, 313000000),
 401         VRPAIR(VLEV_100, 350000000),
 402         VRPAIR(VLEV_105, 400000000),
 403         VRPAIR(VLEV_110, 444000000),
 404         VRPAIR(VLEV_115, 450000000),
 405         VRPAIR(VLEV_120, 475000000),
 406         VRPAIR(VLEV_125, 500000000),
 407         VRPAIR(VLEV_130, 600000000),
 408 };
 409
 410 static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
 411         .tuple_tab = cclk_vlev_datasheet,
 412         .tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
 413         .vr_settling_time = 25 /* us */,
 414 };
 415
 416 static struct platform_device bfin_dpmc = {
 417         .name = "bfin dpmc",
 418         .dev = {
 419                 .platform_data = &bfin_dmpc_vreg_data,
 420         },
 421 };
 422
 423 static struct platform_device *ezkit_devices[] __initdata = {
 424
 425         &bfin_dpmc,
 426
 427 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
 428         &smc91x_device,
 429 #endif
 430
 431 #if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
 432         &net2272_bfin_device,
 433 #endif
 434
 435 #if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
 436         &bfin_isp1760_device,
 437 #endif
 438
 439 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
 440         &bfin_spi0_device,
 441 #endif
 442
 443 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
 444 #ifdef CONFIG_SERIAL_BFIN_UART0
 445         &bfin_uart0_device,
 446 #endif
 447 #endif
 448
 449 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
 450 #ifdef CONFIG_BFIN_SIR0
 451         &bfin_sir0_device,
 452 #endif
 453 #endif
 454
 455 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 456         &bfin_device_gpiokeys,
 457 #endif
 458
 459 #if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
 460         &i2c_gpio_device,
 461 #endif
 462
 463 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
 464         &isp1362_hcd_device,
 465 #endif
 466
 467 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
 468         &ezkit_flash_device,
 469 #endif
 470 };
 471
 472 static int __init ezkit_init(void)
 473 {
 474         int ret;
 475
 476         printk(KERN_INFO "%s(): registering device resources\n", __func__);
 477
 478         ret = platform_add_devices(ezkit_devices, ARRAY_SIZE(ezkit_devices));
 479         if (ret < 0)
 480                 return ret;
 481
 482 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
 483         bfin_write_FIO0_DIR(bfin_read_FIO0_DIR() | (1 << 12));
 484         SSYNC();
 485 #endif
 486
 487         spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
 488         return 0;
 489 }
 490
 491 arch_initcall(ezkit_init);
 492
 493 static struct platform_device *ezkit_early_devices[] __initdata = {
 494 #if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
 495 #ifdef CONFIG_SERIAL_BFIN_UART0
 496         &bfin_uart0_device,
 497 #endif
 498 #endif
 499 };
 500
 501 void __init native_machine_early_platform_add_devices(void)
 502 {
 503         printk(KERN_INFO "register early platform devices\n");
 504         early_platform_add_devices(ezkit_early_devices,
 505                 ARRAY_SIZE(ezkit_early_devices));
 506 }