arch/blackfin/mach-bf548/boards/ezkit.c

   1 /*
   2  * Copyright 2004-2009 Analog Devices Inc.
   3  *                2005 National ICT Australia (NICTA)
   4  *                      Aidan Williams <aidan@nicta.com.au>
   5  *
   6  * Licensed under the GPL-2 or later.
   7  */
   8
   9 #include <linux/device.h>
  10 #include <linux/platform_device.h>
  11 #include <linux/mtd/mtd.h>
  12 #include <linux/mtd/partitions.h>
  13 #include <linux/mtd/physmap.h>
  14 #include <linux/spi/spi.h>
  15 #include <linux/spi/flash.h>
  16 #include <linux/irq.h>
  17 #include <linux/i2c.h>
  18 #include <linux/interrupt.h>
  19 #include <linux/usb/musb.h>
  20 #include <asm/bfin5xx_spi.h>
  21 #include <asm/dma.h>
  22 #include <asm/gpio.h>
  23 #include <asm/nand.h>
  24 #include <asm/dpmc.h>
  25 #include <asm/bfin_sport.h>
  26 #include <asm/portmux.h>
  27 #include <asm/bfin_sdh.h>
  28 #include <mach/bf54x_keys.h>
  29 #include <linux/input.h>
  30 #include <linux/spi/ad7877.h>
  31
  32 /*
  33  * Name the Board for the /proc/cpuinfo
  34  */
  35 const char bfin_board_name[] = "ADI BF548-EZKIT";
  36
  37 /*
  38  *  Driver needs to know address, irq and flag pin.
  39  */
  40
  41 #if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
  42 #include <linux/usb/isp1760.h>
  43 static struct resource bfin_isp1760_resources[] = {
  44         [0] = {
  45                 .start  = 0x2C0C0000,
  46                 .end    = 0x2C0C0000 + 0xfffff,
  47                 .flags  = IORESOURCE_MEM,
  48         },
  49         [1] = {
  50                 .start  = IRQ_PG7,
  51                 .end    = IRQ_PG7,
  52                 .flags  = IORESOURCE_IRQ,
  53         },
  54 };
  55
  56 static struct isp1760_platform_data isp1760_priv = {
  57         .is_isp1761 = 0,
  58         .bus_width_16 = 1,
  59         .port1_otg = 0,
  60         .analog_oc = 0,
  61         .dack_polarity_high = 0,
  62         .dreq_polarity_high = 0,
  63 };
  64
  65 static struct platform_device bfin_isp1760_device = {
  66         .name           = "isp1760",
  67         .id             = 0,
  68         .dev = {
  69                 .platform_data = &isp1760_priv,
  70         },
  71         .num_resources  = ARRAY_SIZE(bfin_isp1760_resources),
  72         .resource       = bfin_isp1760_resources,
  73 };
  74 #endif
  75
  76 #if defined(CONFIG_FB_BF54X_LQ043) || defined(CONFIG_FB_BF54X_LQ043_MODULE)
  77
  78 #include <mach/bf54x-lq043.h>
  79
  80 static struct bfin_bf54xfb_mach_info bf54x_lq043_data = {
  81         .width =        95,
  82         .height =       54,
  83         .xres =         {480, 480, 480},
  84         .yres =         {272, 272, 272},
  85         .bpp =          {24, 24, 24},
  86         .disp =         GPIO_PE3,
  87 };
  88
  89 static struct resource bf54x_lq043_resources[] = {
  90         {
  91                 .start = IRQ_EPPI0_ERR,
  92                 .end = IRQ_EPPI0_ERR,
  93                 .flags = IORESOURCE_IRQ,
  94         },
  95 };
  96
  97 static struct platform_device bf54x_lq043_device = {
  98         .name           = "bf54x-lq043",
  99         .id             = -1,
 100         .num_resources  = ARRAY_SIZE(bf54x_lq043_resources),
 101         .resource       = bf54x_lq043_resources,
 102         .dev            = {
 103                 .platform_data = &bf54x_lq043_data,
 104         },
 105 };
 106 #endif
 107
 108 #if defined(CONFIG_KEYBOARD_BFIN) || defined(CONFIG_KEYBOARD_BFIN_MODULE)
 109 static const unsigned int bf548_keymap[] = {
 110         KEYVAL(0, 0, KEY_ENTER),
 111         KEYVAL(0, 1, KEY_HELP),
 112         KEYVAL(0, 2, KEY_0),
 113         KEYVAL(0, 3, KEY_BACKSPACE),
 114         KEYVAL(1, 0, KEY_TAB),
 115         KEYVAL(1, 1, KEY_9),
 116         KEYVAL(1, 2, KEY_8),
 117         KEYVAL(1, 3, KEY_7),
 118         KEYVAL(2, 0, KEY_DOWN),
 119         KEYVAL(2, 1, KEY_6),
 120         KEYVAL(2, 2, KEY_5),
 121         KEYVAL(2, 3, KEY_4),
 122         KEYVAL(3, 0, KEY_UP),
 123         KEYVAL(3, 1, KEY_3),
 124         KEYVAL(3, 2, KEY_2),
 125         KEYVAL(3, 3, KEY_1),
 126 };
 127
 128 static struct bfin_kpad_platform_data bf54x_kpad_data = {
 129         .rows                   = 4,
 130         .cols                   = 4,
 131         .keymap                 = bf548_keymap,
 132         .keymapsize             = ARRAY_SIZE(bf548_keymap),
 133         .repeat                 = 0,
 134         .debounce_time          = 5000, /* ns (5ms) */
 135         .coldrive_time          = 1000, /* ns (1ms) */
 136         .keyup_test_interval    = 50, /* ms (50ms) */
 137 };
 138
 139 static struct resource bf54x_kpad_resources[] = {
 140         {
 141                 .start = IRQ_KEY,
 142                 .end = IRQ_KEY,
 143                 .flags = IORESOURCE_IRQ,
 144         },
 145 };
 146
 147 static struct platform_device bf54x_kpad_device = {
 148         .name           = "bf54x-keys",
 149         .id             = -1,
 150         .num_resources  = ARRAY_SIZE(bf54x_kpad_resources),
 151         .resource       = bf54x_kpad_resources,
 152         .dev            = {
 153                 .platform_data = &bf54x_kpad_data,
 154         },
 155 };
 156 #endif
 157
 158 #if defined(CONFIG_INPUT_BFIN_ROTARY) || defined(CONFIG_INPUT_BFIN_ROTARY_MODULE)
 159 #include <asm/bfin_rotary.h>
 160
 161 static struct bfin_rotary_platform_data bfin_rotary_data = {
 162         /*.rotary_up_key     = KEY_UP,*/
 163         /*.rotary_down_key   = KEY_DOWN,*/
 164         .rotary_rel_code   = REL_WHEEL,
 165         .rotary_button_key = KEY_ENTER,
 166         .debounce          = 10,        /* 0..17 */
 167         .mode              = ROT_QUAD_ENC | ROT_DEBE,
 168 };
 169
 170 static struct resource bfin_rotary_resources[] = {
 171         {
 172                 .start = IRQ_CNT,
 173                 .end = IRQ_CNT,
 174                 .flags = IORESOURCE_IRQ,
 175         },
 176 };
 177
 178 static struct platform_device bfin_rotary_device = {
 179         .name           = "bfin-rotary",
 180         .id             = -1,
 181         .num_resources  = ARRAY_SIZE(bfin_rotary_resources),
 182         .resource       = bfin_rotary_resources,
 183         .dev            = {
 184                 .platform_data = &bfin_rotary_data,
 185         },
 186 };
 187 #endif
 188
 189 #if defined(CONFIG_INPUT_ADXL34X) || defined(CONFIG_INPUT_ADXL34X_MODULE)
 190 #include <linux/input/adxl34x.h>
 191 static const struct adxl34x_platform_data adxl34x_info = {
 192         .x_axis_offset = 0,
 193         .y_axis_offset = 0,
 194         .z_axis_offset = 0,
 195         .tap_threshold = 0x31,
 196         .tap_duration = 0x10,
 197         .tap_latency = 0x60,
 198         .tap_window = 0xF0,
 199         .tap_axis_control = ADXL_TAP_X_EN | ADXL_TAP_Y_EN | ADXL_TAP_Z_EN,
 200         .act_axis_control = 0xFF,
 201         .activity_threshold = 5,
 202         .inactivity_threshold = 3,
 203         .inactivity_time = 4,
 204         .free_fall_threshold = 0x7,
 205         .free_fall_time = 0x20,
 206         .data_rate = 0x8,
 207         .data_range = ADXL_FULL_RES,
 208
 209         .ev_type = EV_ABS,
 210         .ev_code_x = ABS_X,             /* EV_REL */
 211         .ev_code_y = ABS_Y,             /* EV_REL */
 212         .ev_code_z = ABS_Z,             /* EV_REL */
 213
 214         .ev_code_tap = {BTN_TOUCH, BTN_TOUCH, BTN_TOUCH}, /* EV_KEY x,y,z */
 215
 216 /*      .ev_code_ff = KEY_F,*/          /* EV_KEY */
 217 /*      .ev_code_act_inactivity = KEY_A,*/      /* EV_KEY */
 218         .power_mode = ADXL_AUTO_SLEEP | ADXL_LINK,
 219         .fifo_mode = ADXL_FIFO_STREAM,
 220         .orientation_enable = ADXL_EN_ORIENTATION_3D,
 221         .deadzone_angle = ADXL_DEADZONE_ANGLE_10p8,
 222         .divisor_length = ADXL_LP_FILTER_DIVISOR_16,
 223         /* EV_KEY {+Z, +Y, +X, -X, -Y, -Z} */
 224         .ev_codes_orient_3d = {BTN_Z, BTN_Y, BTN_X, BTN_A, BTN_B, BTN_C},
 225 };
 226 #endif
 227
 228 #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
 229 static struct platform_device rtc_device = {
 230         .name = "rtc-bfin",
 231         .id   = -1,
 232 };
 233 #endif
 234
 235 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
 236 #ifdef CONFIG_SERIAL_BFIN_UART0
 237 static struct resource bfin_uart0_resources[] = {
 238         {
 239                 .start = UART0_DLL,
 240                 .end = UART0_RBR+2,
 241                 .flags = IORESOURCE_MEM,
 242         },
 243         {
 244                 .start = IRQ_UART0_TX,
 245                 .end = IRQ_UART0_TX,
 246                 .flags = IORESOURCE_IRQ,
 247         },
 248         {
 249                 .start = IRQ_UART0_RX,
 250                 .end = IRQ_UART0_RX,
 251                 .flags = IORESOURCE_IRQ,
 252         },
 253         {
 254                 .start = IRQ_UART0_ERROR,
 255                 .end = IRQ_UART0_ERROR,
 256                 .flags = IORESOURCE_IRQ,
 257         },
 258         {
 259                 .start = CH_UART0_TX,
 260                 .end = CH_UART0_TX,
 261                 .flags = IORESOURCE_DMA,
 262         },
 263         {
 264                 .start = CH_UART0_RX,
 265                 .end = CH_UART0_RX,
 266                 .flags = IORESOURCE_DMA,
 267         },
 268 };
 269
 270 static unsigned short bfin_uart0_peripherals[] = {
 271         P_UART0_TX, P_UART0_RX, 0
 272 };
 273
 274 static struct platform_device bfin_uart0_device = {
 275         .name = "bfin-uart",
 276         .id = 0,
 277         .num_resources = ARRAY_SIZE(bfin_uart0_resources),
 278         .resource = bfin_uart0_resources,
 279         .dev = {
 280                 .platform_data = &bfin_uart0_peripherals, /* Passed to driver */
 281         },
 282 };
 283 #endif
 284 #ifdef CONFIG_SERIAL_BFIN_UART1
 285 static struct resource bfin_uart1_resources[] = {
 286         {
 287                 .start = UART1_DLL,
 288                 .end = UART1_RBR+2,
 289                 .flags = IORESOURCE_MEM,
 290         },
 291         {
 292                 .start = IRQ_UART1_TX,
 293                 .end = IRQ_UART1_TX,
 294                 .flags = IORESOURCE_IRQ,
 295         },
 296         {
 297                 .start = IRQ_UART1_RX,
 298                 .end = IRQ_UART1_RX,
 299                 .flags = IORESOURCE_IRQ,
 300         },
 301         {
 302                 .start = IRQ_UART1_ERROR,
 303                 .end = IRQ_UART1_ERROR,
 304                 .flags = IORESOURCE_IRQ,
 305         },
 306         {
 307                 .start = CH_UART1_TX,
 308                 .end = CH_UART1_TX,
 309                 .flags = IORESOURCE_DMA,
 310         },
 311         {
 312                 .start = CH_UART1_RX,
 313                 .end = CH_UART1_RX,
 314                 .flags = IORESOURCE_DMA,
 315         },
 316 #ifdef CONFIG_BFIN_UART1_CTSRTS
 317         {       /* CTS pin -- 0 means not supported */
 318                 .start = GPIO_PE10,
 319                 .end = GPIO_PE10,
 320                 .flags = IORESOURCE_IO,
 321         },
 322         {       /* RTS pin -- 0 means not supported */
 323                 .start = GPIO_PE9,
 324                 .end = GPIO_PE9,
 325                 .flags = IORESOURCE_IO,
 326         },
 327 #endif
 328 };
 329
 330 static unsigned short bfin_uart1_peripherals[] = {
 331         P_UART1_TX, P_UART1_RX,
 332 #ifdef CONFIG_BFIN_UART1_CTSRTS
 333         P_UART1_RTS, P_UART1_CTS,
 334 #endif
 335         0
 336 };
 337
 338 static struct platform_device bfin_uart1_device = {
 339         .name = "bfin-uart",
 340         .id = 1,
 341         .num_resources = ARRAY_SIZE(bfin_uart1_resources),
 342         .resource = bfin_uart1_resources,
 343         .dev = {
 344                 .platform_data = &bfin_uart1_peripherals, /* Passed to driver */
 345         },
 346 };
 347 #endif
 348 #ifdef CONFIG_SERIAL_BFIN_UART2
 349 static struct resource bfin_uart2_resources[] = {
 350         {
 351                 .start = UART2_DLL,
 352                 .end = UART2_RBR+2,
 353                 .flags = IORESOURCE_MEM,
 354         },
 355         {
 356                 .start = IRQ_UART2_TX,
 357                 .end = IRQ_UART2_TX,
 358                 .flags = IORESOURCE_IRQ,
 359         },
 360         {
 361                 .start = IRQ_UART2_RX,
 362                 .end = IRQ_UART2_RX,
 363                 .flags = IORESOURCE_IRQ,
 364         },
 365         {
 366                 .start = IRQ_UART2_ERROR,
 367                 .end = IRQ_UART2_ERROR,
 368                 .flags = IORESOURCE_IRQ,
 369         },
 370         {
 371                 .start = CH_UART2_TX,
 372                 .end = CH_UART2_TX,
 373                 .flags = IORESOURCE_DMA,
 374         },
 375         {
 376                 .start = CH_UART2_RX,
 377                 .end = CH_UART2_RX,
 378                 .flags = IORESOURCE_DMA,
 379         },
 380 };
 381
 382 static unsigned short bfin_uart2_peripherals[] = {
 383         P_UART2_TX, P_UART2_RX, 0
 384 };
 385
 386 static struct platform_device bfin_uart2_device = {
 387         .name = "bfin-uart",
 388         .id = 2,
 389         .num_resources = ARRAY_SIZE(bfin_uart2_resources),
 390         .resource = bfin_uart2_resources,
 391         .dev = {
 392                 .platform_data = &bfin_uart2_peripherals, /* Passed to driver */
 393         },
 394 };
 395 #endif
 396 #ifdef CONFIG_SERIAL_BFIN_UART3
 397 static struct resource bfin_uart3_resources[] = {
 398         {
 399                 .start = UART3_DLL,
 400                 .end = UART3_RBR+2,
 401                 .flags = IORESOURCE_MEM,
 402         },
 403         {
 404                 .start = IRQ_UART3_TX,
 405                 .end = IRQ_UART3_TX,
 406                 .flags = IORESOURCE_IRQ,
 407         },
 408         {
 409                 .start = IRQ_UART3_RX,
 410                 .end = IRQ_UART3_RX,
 411                 .flags = IORESOURCE_IRQ,
 412         },
 413         {
 414                 .start = IRQ_UART3_ERROR,
 415                 .end = IRQ_UART3_ERROR,
 416                 .flags = IORESOURCE_IRQ,
 417         },
 418         {
 419                 .start = CH_UART3_TX,
 420                 .end = CH_UART3_TX,
 421                 .flags = IORESOURCE_DMA,
 422         },
 423         {
 424                 .start = CH_UART3_RX,
 425                 .end = CH_UART3_RX,
 426                 .flags = IORESOURCE_DMA,
 427         },
 428 #ifdef CONFIG_BFIN_UART3_CTSRTS
 429         {       /* CTS pin -- 0 means not supported */
 430                 .start = GPIO_PB3,
 431                 .end = GPIO_PB3,
 432                 .flags = IORESOURCE_IO,
 433         },
 434         {       /* RTS pin -- 0 means not supported */
 435                 .start = GPIO_PB2,
 436                 .end = GPIO_PB2,
 437                 .flags = IORESOURCE_IO,
 438         },
 439 #endif
 440 };
 441
 442 static unsigned short bfin_uart3_peripherals[] = {
 443         P_UART3_TX, P_UART3_RX,
 444 #ifdef CONFIG_BFIN_UART3_CTSRTS
 445         P_UART3_RTS, P_UART3_CTS,
 446 #endif
 447         0
 448 };
 449
 450 static struct platform_device bfin_uart3_device = {
 451         .name = "bfin-uart",
 452         .id = 3,
 453         .num_resources = ARRAY_SIZE(bfin_uart3_resources),
 454         .resource = bfin_uart3_resources,
 455         .dev = {
 456                 .platform_data = &bfin_uart3_peripherals, /* Passed to driver */
 457         },
 458 };
 459 #endif
 460 #endif
 461
 462 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
 463 #ifdef CONFIG_BFIN_SIR0
 464 static struct resource bfin_sir0_resources[] = {
 465         {
 466                 .start = 0xFFC00400,
 467                 .end = 0xFFC004FF,
 468                 .flags = IORESOURCE_MEM,
 469         },
 470         {
 471                 .start = IRQ_UART0_RX,
 472                 .end = IRQ_UART0_RX+1,
 473                 .flags = IORESOURCE_IRQ,
 474         },
 475         {
 476                 .start = CH_UART0_RX,
 477                 .end = CH_UART0_RX+1,
 478                 .flags = IORESOURCE_DMA,
 479         },
 480 };
 481 static struct platform_device bfin_sir0_device = {
 482         .name = "bfin_sir",
 483         .id = 0,
 484         .num_resources = ARRAY_SIZE(bfin_sir0_resources),
 485         .resource = bfin_sir0_resources,
 486 };
 487 #endif
 488 #ifdef CONFIG_BFIN_SIR1
 489 static struct resource bfin_sir1_resources[] = {
 490         {
 491                 .start = 0xFFC02000,
 492                 .end = 0xFFC020FF,
 493                 .flags = IORESOURCE_MEM,
 494         },
 495         {
 496                 .start = IRQ_UART1_RX,
 497                 .end = IRQ_UART1_RX+1,
 498                 .flags = IORESOURCE_IRQ,
 499         },
 500         {
 501                 .start = CH_UART1_RX,
 502                 .end = CH_UART1_RX+1,
 503                 .flags = IORESOURCE_DMA,
 504         },
 505 };
 506 static struct platform_device bfin_sir1_device = {
 507         .name = "bfin_sir",
 508         .id = 1,
 509         .num_resources = ARRAY_SIZE(bfin_sir1_resources),
 510         .resource = bfin_sir1_resources,
 511 };
 512 #endif
 513 #ifdef CONFIG_BFIN_SIR2
 514 static struct resource bfin_sir2_resources[] = {
 515         {
 516                 .start = 0xFFC02100,
 517                 .end = 0xFFC021FF,
 518                 .flags = IORESOURCE_MEM,
 519         },
 520         {
 521                 .start = IRQ_UART2_RX,
 522                 .end = IRQ_UART2_RX+1,
 523                 .flags = IORESOURCE_IRQ,
 524         },
 525         {
 526                 .start = CH_UART2_RX,
 527                 .end = CH_UART2_RX+1,
 528                 .flags = IORESOURCE_DMA,
 529         },
 530 };
 531 static struct platform_device bfin_sir2_device = {
 532         .name = "bfin_sir",
 533         .id = 2,
 534         .num_resources = ARRAY_SIZE(bfin_sir2_resources),
 535         .resource = bfin_sir2_resources,
 536 };
 537 #endif
 538 #ifdef CONFIG_BFIN_SIR3
 539 static struct resource bfin_sir3_resources[] = {
 540         {
 541                 .start = 0xFFC03100,
 542                 .end = 0xFFC031FF,
 543                 .flags = IORESOURCE_MEM,
 544         },
 545         {
 546                 .start = IRQ_UART3_RX,
 547                 .end = IRQ_UART3_RX+1,
 548                 .flags = IORESOURCE_IRQ,
 549         },
 550         {
 551                 .start = CH_UART3_RX,
 552                 .end = CH_UART3_RX+1,
 553                 .flags = IORESOURCE_DMA,
 554         },
 555 };
 556 static struct platform_device bfin_sir3_device = {
 557         .name = "bfin_sir",
 558         .id = 3,
 559         .num_resources = ARRAY_SIZE(bfin_sir3_resources),
 560         .resource = bfin_sir3_resources,
 561 };
 562 #endif
 563 #endif
 564
 565 #if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
 566 #include <linux/smsc911x.h>
 567
 568 static struct resource smsc911x_resources[] = {
 569         {
 570                 .name = "smsc911x-memory",
 571                 .start = 0x24000000,
 572                 .end = 0x24000000 + 0xFF,
 573                 .flags = IORESOURCE_MEM,
 574         },
 575         {
 576                 .start = IRQ_PE8,
 577                 .end = IRQ_PE8,
 578                 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
 579         },
 580 };
 581
 582 static struct smsc911x_platform_config smsc911x_config = {
 583         .flags = SMSC911X_USE_32BIT,
 584         .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
 585         .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
 586         .phy_interface = PHY_INTERFACE_MODE_MII,
 587 };
 588
 589 static struct platform_device smsc911x_device = {
 590         .name = "smsc911x",
 591         .id = 0,
 592         .num_resources = ARRAY_SIZE(smsc911x_resources),
 593         .resource = smsc911x_resources,
 594         .dev = {
 595                 .platform_data = &smsc911x_config,
 596         },
 597 };
 598 #endif
 599
 600 #if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
 601 static struct resource musb_resources[] = {
 602         [0] = {
 603                 .start  = 0xFFC03C00,
 604                 .end    = 0xFFC040FF,
 605                 .flags  = IORESOURCE_MEM,
 606         },
 607         [1] = { /* general IRQ */
 608                 .start  = IRQ_USB_INT0,
 609                 .end    = IRQ_USB_INT0,
 610                 .flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
 611                 .name   = "mc"
 612         },
 613         [2] = { /* DMA IRQ */
 614                 .start  = IRQ_USB_DMA,
 615                 .end    = IRQ_USB_DMA,
 616                 .flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
 617                 .name   = "dma"
 618         },
 619 };
 620
 621 static struct musb_hdrc_config musb_config = {
 622         .multipoint     = 0,
 623         .dyn_fifo       = 0,
 624         .soft_con       = 1,
 625         .dma            = 1,
 626         .num_eps        = 8,
 627         .dma_channels   = 8,
 628         .gpio_vrsel     = GPIO_PE7,
 629         /* Some custom boards need to be active low, just set it to "0"
 630          * if it is the case.
 631          */
 632         .gpio_vrsel_active      = 1,
 633         .clkin          = 24,           /* musb CLKIN in MHZ */
 634 };
 635
 636 static struct musb_hdrc_platform_data musb_plat = {
 637 #if defined(CONFIG_USB_MUSB_OTG)
 638         .mode           = MUSB_OTG,
 639 #elif defined(CONFIG_USB_MUSB_HDRC_HCD)
 640         .mode           = MUSB_HOST,
 641 #elif defined(CONFIG_USB_GADGET_MUSB_HDRC)
 642         .mode           = MUSB_PERIPHERAL,
 643 #endif
 644         .config         = &musb_config,
 645 };
 646
 647 static u64 musb_dmamask = ~(u32)0;
 648
 649 static struct platform_device musb_device = {
 650         .name           = "musb-blackfin",
 651         .id             = 0,
 652         .dev = {
 653                 .dma_mask               = &musb_dmamask,
 654                 .coherent_dma_mask      = 0xffffffff,
 655                 .platform_data          = &musb_plat,
 656         },
 657         .num_resources  = ARRAY_SIZE(musb_resources),
 658         .resource       = musb_resources,
 659 };
 660 #endif
 661
 662 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
 663 #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
 664 static struct resource bfin_sport0_uart_resources[] = {
 665         {
 666                 .start = SPORT0_TCR1,
 667                 .end = SPORT0_MRCS3+4,
 668                 .flags = IORESOURCE_MEM,
 669         },
 670         {
 671                 .start = IRQ_SPORT0_RX,
 672                 .end = IRQ_SPORT0_RX+1,
 673                 .flags = IORESOURCE_IRQ,
 674         },
 675         {
 676                 .start = IRQ_SPORT0_ERROR,
 677                 .end = IRQ_SPORT0_ERROR,
 678                 .flags = IORESOURCE_IRQ,
 679         },
 680 };
 681
 682 static unsigned short bfin_sport0_peripherals[] = {
 683         P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
 684         P_SPORT0_DRPRI, P_SPORT0_RSCLK, 0
 685 };
 686
 687 static struct platform_device bfin_sport0_uart_device = {
 688         .name = "bfin-sport-uart",
 689         .id = 0,
 690         .num_resources = ARRAY_SIZE(bfin_sport0_uart_resources),
 691         .resource = bfin_sport0_uart_resources,
 692         .dev = {
 693                 .platform_data = &bfin_sport0_peripherals, /* Passed to driver */
 694         },
 695 };
 696 #endif
 697 #ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
 698 static struct resource bfin_sport1_uart_resources[] = {
 699         {
 700                 .start = SPORT1_TCR1,
 701                 .end = SPORT1_MRCS3+4,
 702                 .flags = IORESOURCE_MEM,
 703         },
 704         {
 705                 .start = IRQ_SPORT1_RX,
 706                 .end = IRQ_SPORT1_RX+1,
 707                 .flags = IORESOURCE_IRQ,
 708         },
 709         {
 710                 .start = IRQ_SPORT1_ERROR,
 711                 .end = IRQ_SPORT1_ERROR,
 712                 .flags = IORESOURCE_IRQ,
 713         },
 714 };
 715
 716 static unsigned short bfin_sport1_peripherals[] = {
 717         P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
 718         P_SPORT1_DRPRI, P_SPORT1_RSCLK, 0
 719 };
 720
 721 static struct platform_device bfin_sport1_uart_device = {
 722         .name = "bfin-sport-uart",
 723         .id = 1,
 724         .num_resources = ARRAY_SIZE(bfin_sport1_uart_resources),
 725         .resource = bfin_sport1_uart_resources,
 726         .dev = {
 727                 .platform_data = &bfin_sport1_peripherals, /* Passed to driver */
 728         },
 729 };
 730 #endif
 731 #ifdef CONFIG_SERIAL_BFIN_SPORT2_UART
 732 static struct resource bfin_sport2_uart_resources[] = {
 733         {
 734                 .start = SPORT2_TCR1,
 735                 .end = SPORT2_MRCS3+4,
 736                 .flags = IORESOURCE_MEM,
 737         },
 738         {
 739                 .start = IRQ_SPORT2_RX,
 740                 .end = IRQ_SPORT2_RX+1,
 741                 .flags = IORESOURCE_IRQ,
 742         },
 743         {
 744                 .start = IRQ_SPORT2_ERROR,
 745                 .end = IRQ_SPORT2_ERROR,
 746                 .flags = IORESOURCE_IRQ,
 747         },
 748 };
 749
 750 static unsigned short bfin_sport2_peripherals[] = {
 751         P_SPORT2_TFS, P_SPORT2_DTPRI, P_SPORT2_TSCLK, P_SPORT2_RFS,
 752         P_SPORT2_DRPRI, P_SPORT2_RSCLK, P_SPORT2_DRSEC, P_SPORT2_DTSEC, 0
 753 };
 754
 755 static struct platform_device bfin_sport2_uart_device = {
 756         .name = "bfin-sport-uart",
 757         .id = 2,
 758         .num_resources = ARRAY_SIZE(bfin_sport2_uart_resources),
 759         .resource = bfin_sport2_uart_resources,
 760         .dev = {
 761                 .platform_data = &bfin_sport2_peripherals, /* Passed to driver */
 762         },
 763 };
 764 #endif
 765 #ifdef CONFIG_SERIAL_BFIN_SPORT3_UART
 766 static struct resource bfin_sport3_uart_resources[] = {
 767         {
 768                 .start = SPORT3_TCR1,
 769                 .end = SPORT3_MRCS3+4,
 770                 .flags = IORESOURCE_MEM,
 771         },
 772         {
 773                 .start = IRQ_SPORT3_RX,
 774                 .end = IRQ_SPORT3_RX+1,
 775                 .flags = IORESOURCE_IRQ,
 776         },
 777         {
 778                 .start = IRQ_SPORT3_ERROR,
 779                 .end = IRQ_SPORT3_ERROR,
 780                 .flags = IORESOURCE_IRQ,
 781         },
 782 };
 783
 784 static unsigned short bfin_sport3_peripherals[] = {
 785         P_SPORT3_TFS, P_SPORT3_DTPRI, P_SPORT3_TSCLK, P_SPORT3_RFS,
 786         P_SPORT3_DRPRI, P_SPORT3_RSCLK, P_SPORT3_DRSEC, P_SPORT3_DTSEC, 0
 787 };
 788
 789 static struct platform_device bfin_sport3_uart_device = {
 790         .name = "bfin-sport-uart",
 791         .id = 3,
 792         .num_resources = ARRAY_SIZE(bfin_sport3_uart_resources),
 793         .resource = bfin_sport3_uart_resources,
 794         .dev = {
 795                 .platform_data = &bfin_sport3_peripherals, /* Passed to driver */
 796         },
 797 };
 798 #endif
 799 #endif
 800
 801 #if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE)
 802
 803 static unsigned short bfin_can0_peripherals[] = {
 804         P_CAN0_RX, P_CAN0_TX, 0
 805 };
 806
 807 static struct resource bfin_can0_resources[] = {
 808         {
 809                 .start = 0xFFC02A00,
 810                 .end = 0xFFC02FFF,
 811                 .flags = IORESOURCE_MEM,
 812         },
 813         {
 814                 .start = IRQ_CAN0_RX,
 815                 .end = IRQ_CAN0_RX,
 816                 .flags = IORESOURCE_IRQ,
 817         },
 818         {
 819                 .start = IRQ_CAN0_TX,
 820                 .end = IRQ_CAN0_TX,
 821                 .flags = IORESOURCE_IRQ,
 822         },
 823         {
 824                 .start = IRQ_CAN0_ERROR,
 825                 .end = IRQ_CAN0_ERROR,
 826                 .flags = IORESOURCE_IRQ,
 827         },
 828 };
 829
 830 static struct platform_device bfin_can0_device = {
 831         .name = "bfin_can",
 832         .id = 0,
 833         .num_resources = ARRAY_SIZE(bfin_can0_resources),
 834         .resource = bfin_can0_resources,
 835         .dev = {
 836                 .platform_data = &bfin_can0_peripherals, /* Passed to driver */
 837         },
 838 };
 839
 840 static unsigned short bfin_can1_peripherals[] = {
 841         P_CAN1_RX, P_CAN1_TX, 0
 842 };
 843
 844 static struct resource bfin_can1_resources[] = {
 845         {
 846                 .start = 0xFFC03200,
 847                 .end = 0xFFC037FF,
 848                 .flags = IORESOURCE_MEM,
 849         },
 850         {
 851                 .start = IRQ_CAN1_RX,
 852                 .end = IRQ_CAN1_RX,
 853                 .flags = IORESOURCE_IRQ,
 854         },
 855         {
 856                 .start = IRQ_CAN1_TX,
 857                 .end = IRQ_CAN1_TX,
 858                 .flags = IORESOURCE_IRQ,
 859         },
 860         {
 861                 .start = IRQ_CAN1_ERROR,
 862                 .end = IRQ_CAN1_ERROR,
 863                 .flags = IORESOURCE_IRQ,
 864         },
 865 };
 866
 867 static struct platform_device bfin_can1_device = {
 868         .name = "bfin_can",
 869         .id = 1,
 870         .num_resources = ARRAY_SIZE(bfin_can1_resources),
 871         .resource = bfin_can1_resources,
 872         .dev = {
 873                 .platform_data = &bfin_can1_peripherals, /* Passed to driver */
 874         },
 875 };
 876
 877 #endif
 878
 879 #if defined(CONFIG_PATA_BF54X) || defined(CONFIG_PATA_BF54X_MODULE)
 880 static struct resource bfin_atapi_resources[] = {
 881         {
 882                 .start = 0xFFC03800,
 883                 .end = 0xFFC0386F,
 884                 .flags = IORESOURCE_MEM,
 885         },
 886         {
 887                 .start = IRQ_ATAPI_ERR,
 888                 .end = IRQ_ATAPI_ERR,
 889                 .flags = IORESOURCE_IRQ,
 890         },
 891 };
 892
 893 static struct platform_device bfin_atapi_device = {
 894         .name = "pata-bf54x",
 895         .id = -1,
 896         .num_resources = ARRAY_SIZE(bfin_atapi_resources),
 897         .resource = bfin_atapi_resources,
 898 };
 899 #endif
 900
 901 #if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
 902 static struct mtd_partition partition_info[] = {
 903         {
 904                 .name = "bootloader(nand)",
 905                 .offset = 0,
 906                 .size = 0x80000,
 907         }, {
 908                 .name = "linux kernel(nand)",
 909                 .offset = MTDPART_OFS_APPEND,
 910                 .size = 4 * 1024 * 1024,
 911         },
 912         {
 913                 .name = "file system(nand)",
 914                 .offset = MTDPART_OFS_APPEND,
 915                 .size = MTDPART_SIZ_FULL,
 916         },
 917 };
 918
 919 static struct bf5xx_nand_platform bf5xx_nand_platform = {
 920         .data_width = NFC_NWIDTH_8,
 921         .partitions = partition_info,
 922         .nr_partitions = ARRAY_SIZE(partition_info),
 923         .rd_dly = 3,
 924         .wr_dly = 3,
 925 };
 926
 927 static struct resource bf5xx_nand_resources[] = {
 928         {
 929                 .start = 0xFFC03B00,
 930                 .end = 0xFFC03B4F,
 931                 .flags = IORESOURCE_MEM,
 932         },
 933         {
 934                 .start = CH_NFC,
 935                 .end = CH_NFC,
 936                 .flags = IORESOURCE_IRQ,
 937         },
 938 };
 939
 940 static struct platform_device bf5xx_nand_device = {
 941         .name = "bf5xx-nand",
 942         .id = 0,
 943         .num_resources = ARRAY_SIZE(bf5xx_nand_resources),
 944         .resource = bf5xx_nand_resources,
 945         .dev = {
 946                 .platform_data = &bf5xx_nand_platform,
 947         },
 948 };
 949 #endif
 950
 951 #if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE)
 952
 953 static struct bfin_sd_host bfin_sdh_data = {
 954         .dma_chan = CH_SDH,
 955         .irq_int0 = IRQ_SDH_MASK0,
 956         .pin_req = {P_SD_D0, P_SD_D1, P_SD_D2, P_SD_D3, P_SD_CLK, P_SD_CMD, 0},
 957 };
 958
 959 static struct platform_device bf54x_sdh_device = {
 960         .name = "bfin-sdh",
 961         .id = 0,
 962         .dev = {
 963                 .platform_data = &bfin_sdh_data,
 964         },
 965 };
 966 #endif
 967
 968 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
 969 static struct mtd_partition ezkit_partitions[] = {
 970         {
 971                 .name       = "bootloader(nor)",
 972                 .size       = 0x80000,
 973                 .offset     = 0,
 974         }, {
 975                 .name       = "linux kernel(nor)",
 976                 .size       = 0x400000,
 977                 .offset     = MTDPART_OFS_APPEND,
 978         }, {
 979                 .name       = "file system(nor)",
 980                 .size       = 0x1000000 - 0x80000 - 0x400000 - 0x8000 * 4,
 981                 .offset     = MTDPART_OFS_APPEND,
 982         }, {
 983                 .name       = "config(nor)",
 984                 .size       = 0x8000 * 3,
 985                 .offset     = MTDPART_OFS_APPEND,
 986         }, {
 987                 .name       = "u-boot env(nor)",
 988                 .size       = 0x8000,
 989                 .offset     = MTDPART_OFS_APPEND,
 990         }
 991 };
 992
 993 static struct physmap_flash_data ezkit_flash_data = {
 994         .width      = 2,
 995         .parts      = ezkit_partitions,
 996         .nr_parts   = ARRAY_SIZE(ezkit_partitions),
 997 };
 998
 999 static struct resource ezkit_flash_resource = {
1000         .start = 0x20000000,
1001         .end   = 0x21ffffff,
1002         .flags = IORESOURCE_MEM,
1003 };
1004
1005 static struct platform_device ezkit_flash_device = {
1006         .name          = "physmap-flash",
1007         .id            = 0,
1008         .dev = {
1009                 .platform_data = &ezkit_flash_data,
1010         },
1011         .num_resources = 1,
1012         .resource      = &ezkit_flash_resource,
1013 };
1014 #endif
1015
1016 #if defined(CONFIG_MTD_M25P80) \
1017         || defined(CONFIG_MTD_M25P80_MODULE)
1018 /* SPI flash chip (m25p16) */
1019 static struct mtd_partition bfin_spi_flash_partitions[] = {
1020         {
1021                 .name = "bootloader(spi)",
1022                 .size = 0x00080000,
1023                 .offset = 0,
1024                 .mask_flags = MTD_CAP_ROM
1025         }, {
1026                 .name = "linux kernel(spi)",
1027                 .size = MTDPART_SIZ_FULL,
1028                 .offset = MTDPART_OFS_APPEND,
1029         }
1030 };
1031
1032 static struct flash_platform_data bfin_spi_flash_data = {
1033         .name = "m25p80",
1034         .parts = bfin_spi_flash_partitions,
1035         .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
1036         .type = "m25p16",
1037 };
1038
1039 static struct bfin5xx_spi_chip spi_flash_chip_info = {
1040         .enable_dma = 0,         /* use dma transfer with this chip*/
1041 };
1042 #endif
1043
1044 #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
1045 static const struct ad7877_platform_data bfin_ad7877_ts_info = {
1046         .model                  = 7877,
1047         .vref_delay_usecs       = 50,   /* internal, no capacitor */
1048         .x_plate_ohms           = 419,
1049         .y_plate_ohms           = 486,
1050         .pressure_max           = 1000,
1051         .pressure_min           = 0,
1052         .stopacq_polarity       = 1,
1053         .first_conversion_delay = 3,
1054         .acquisition_time       = 1,
1055         .averaging              = 1,
1056         .pen_down_acc_interval  = 1,
1057 };
1058 #endif
1059
1060 static struct spi_board_info bfin_spi_board_info[] __initdata = {
1061 #if defined(CONFIG_MTD_M25P80) \
1062         || defined(CONFIG_MTD_M25P80_MODULE)
1063         {
1064                 /* the modalias must be the same as spi device driver name */
1065                 .modalias = "m25p80", /* Name of spi_driver for this device */
1066                 .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
1067                 .bus_num = 0, /* Framework bus number */
1068                 .chip_select = 1, /* SPI_SSEL1*/
1069                 .platform_data = &bfin_spi_flash_data,
1070                 .controller_data = &spi_flash_chip_info,
1071                 .mode = SPI_MODE_3,
1072         },
1073 #endif
1074 #if defined(CONFIG_SND_BF5XX_SOC_AD183X) \
1075         || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE)
1076         {
1077                 .modalias = "ad183x",
1078                 .max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
1079                 .bus_num = 1,
1080                 .chip_select = 4,
1081         },
1082 #endif
1083 #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
1084         {
1085                 .modalias               = "ad7877",
1086                 .platform_data          = &bfin_ad7877_ts_info,
1087                 .irq                    = IRQ_PB4,      /* old boards (<=Rev 1.3) use IRQ_PJ11 */
1088                 .max_speed_hz           = 12500000,     /* max spi clock (SCK) speed in HZ */
1089                 .bus_num                = 0,
1090                 .chip_select            = 2,
1091         },
1092 #endif
1093 #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
1094         {
1095                 .modalias = "spidev",
1096                 .max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
1097                 .bus_num = 0,
1098                 .chip_select = 1,
1099         },
1100 #endif
1101 #if defined(CONFIG_INPUT_ADXL34X_SPI) || defined(CONFIG_INPUT_ADXL34X_SPI_MODULE)
1102         {
1103                 .modalias               = "adxl34x",
1104                 .platform_data          = &adxl34x_info,
1105                 .irq                    = IRQ_PC5,
1106                 .max_speed_hz           = 5000000,     /* max spi clock (SCK) speed in HZ */
1107                 .bus_num                = 1,
1108                 .chip_select            = 2,
1109                 .mode = SPI_MODE_3,
1110         },
1111 #endif
1112 };
1113 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
1114 /* SPI (0) */
1115 static struct resource bfin_spi0_resource[] = {
1116         [0] = {
1117                 .start = SPI0_REGBASE,
1118                 .end   = SPI0_REGBASE + 0xFF,
1119                 .flags = IORESOURCE_MEM,
1120         },
1121         [1] = {
1122                 .start = CH_SPI0,
1123                 .end   = CH_SPI0,
1124                 .flags = IORESOURCE_DMA,
1125         },
1126         [2] = {
1127                 .start = IRQ_SPI0,
1128                 .end   = IRQ_SPI0,
1129                 .flags = IORESOURCE_IRQ,
1130         }
1131 };
1132
1133 /* SPI (1) */
1134 static struct resource bfin_spi1_resource[] = {
1135         [0] = {
1136                 .start = SPI1_REGBASE,
1137                 .end   = SPI1_REGBASE + 0xFF,
1138                 .flags = IORESOURCE_MEM,
1139         },
1140         [1] = {
1141                 .start = CH_SPI1,
1142                 .end   = CH_SPI1,
1143                 .flags = IORESOURCE_DMA,
1144         },
1145         [2] = {
1146                 .start = IRQ_SPI1,
1147                 .end   = IRQ_SPI1,
1148                 .flags = IORESOURCE_IRQ,
1149         }
1150 };
1151
1152 /* SPI controller data */
1153 static struct bfin5xx_spi_master bf54x_spi_master_info0 = {
1154         .num_chipselect = 4,
1155         .enable_dma = 1,  /* master has the ability to do dma transfer */
1156         .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
1157 };
1158
1159 static struct platform_device bf54x_spi_master0 = {
1160         .name = "bfin-spi",
1161         .id = 0, /* Bus number */
1162         .num_resources = ARRAY_SIZE(bfin_spi0_resource),
1163         .resource = bfin_spi0_resource,
1164         .dev = {
1165                 .platform_data = &bf54x_spi_master_info0, /* Passed to driver */
1166                 },
1167 };
1168
1169 static struct bfin5xx_spi_master bf54x_spi_master_info1 = {
1170         .num_chipselect = 4,
1171         .enable_dma = 1,  /* master has the ability to do dma transfer */
1172         .pin_req = {P_SPI1_SCK, P_SPI1_MISO, P_SPI1_MOSI, 0},
1173 };
1174
1175 static struct platform_device bf54x_spi_master1 = {
1176         .name = "bfin-spi",
1177         .id = 1, /* Bus number */
1178         .num_resources = ARRAY_SIZE(bfin_spi1_resource),
1179         .resource = bfin_spi1_resource,
1180         .dev = {
1181                 .platform_data = &bf54x_spi_master_info1, /* Passed to driver */
1182                 },
1183 };
1184 #endif  /* spi master and devices */
1185
1186 #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
1187 static struct resource bfin_twi0_resource[] = {
1188         [0] = {
1189                 .start = TWI0_REGBASE,
1190                 .end   = TWI0_REGBASE + 0xFF,
1191                 .flags = IORESOURCE_MEM,
1192         },
1193         [1] = {
1194                 .start = IRQ_TWI0,
1195                 .end   = IRQ_TWI0,
1196                 .flags = IORESOURCE_IRQ,
1197         },
1198 };
1199
1200 static struct platform_device i2c_bfin_twi0_device = {
1201         .name = "i2c-bfin-twi",
1202         .id = 0,
1203         .num_resources = ARRAY_SIZE(bfin_twi0_resource),
1204         .resource = bfin_twi0_resource,
1205 };
1206
1207 #if !defined(CONFIG_BF542)      /* The BF542 only has 1 TWI */
1208 static struct resource bfin_twi1_resource[] = {
1209         [0] = {
1210                 .start = TWI1_REGBASE,
1211                 .end   = TWI1_REGBASE + 0xFF,
1212                 .flags = IORESOURCE_MEM,
1213         },
1214         [1] = {
1215                 .start = IRQ_TWI1,
1216                 .end   = IRQ_TWI1,
1217                 .flags = IORESOURCE_IRQ,
1218         },
1219 };
1220
1221 static struct platform_device i2c_bfin_twi1_device = {
1222         .name = "i2c-bfin-twi",
1223         .id = 1,
1224         .num_resources = ARRAY_SIZE(bfin_twi1_resource),
1225         .resource = bfin_twi1_resource,
1226 };
1227 #endif
1228 #endif
1229
1230 static struct i2c_board_info __initdata bfin_i2c_board_info0[] = {
1231 };
1232
1233 #if !defined(CONFIG_BF542)      /* The BF542 only has 1 TWI */
1234 static struct i2c_board_info __initdata bfin_i2c_board_info1[] = {
1235 #if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
1236         {
1237                 I2C_BOARD_INFO("pcf8574_lcd", 0x22),
1238         },
1239 #endif
1240 #if defined(CONFIG_INPUT_PCF8574) || defined(CONFIG_INPUT_PCF8574_MODULE)
1241         {
1242                 I2C_BOARD_INFO("pcf8574_keypad", 0x27),
1243                 .irq = 212,
1244         },
1245 #endif
1246 #if defined(CONFIG_INPUT_ADXL34X_I2C) || defined(CONFIG_INPUT_ADXL34X_I2C_MODULE)
1247         {
1248                 I2C_BOARD_INFO("adxl34x", 0x53),
1249                 .irq = IRQ_PC5,
1250                 .platform_data = (void *)&adxl34x_info,
1251         },
1252 #endif
1253 #if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
1254         {
1255                 I2C_BOARD_INFO("ad5252", 0x2f),
1256         },
1257 #endif
1258 };
1259 #endif
1260
1261 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
1262 #include <linux/gpio_keys.h>
1263
1264 static struct gpio_keys_button bfin_gpio_keys_table[] = {
1265         {BTN_0, GPIO_PB8, 1, "gpio-keys: BTN0"},
1266         {BTN_1, GPIO_PB9, 1, "gpio-keys: BTN1"},
1267         {BTN_2, GPIO_PB10, 1, "gpio-keys: BTN2"},
1268         {BTN_3, GPIO_PB11, 1, "gpio-keys: BTN3"},
1269 };
1270
1271 static struct gpio_keys_platform_data bfin_gpio_keys_data = {
1272         .buttons        = bfin_gpio_keys_table,
1273         .nbuttons       = ARRAY_SIZE(bfin_gpio_keys_table),
1274 };
1275
1276 static struct platform_device bfin_device_gpiokeys = {
1277         .name      = "gpio-keys",
1278         .dev = {
1279                 .platform_data = &bfin_gpio_keys_data,
1280         },
1281 };
1282 #endif
1283
1284 static const unsigned int cclk_vlev_datasheet[] =
1285 {
1286 /*
1287  * Internal VLEV BF54XSBBC1533
1288  ****temporarily using these values until data sheet is updated
1289  */
1290         VRPAIR(VLEV_085, 150000000),
1291         VRPAIR(VLEV_090, 250000000),
1292         VRPAIR(VLEV_110, 276000000),
1293         VRPAIR(VLEV_115, 301000000),
1294         VRPAIR(VLEV_120, 525000000),
1295         VRPAIR(VLEV_125, 550000000),
1296         VRPAIR(VLEV_130, 600000000),
1297 };
1298
1299 static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
1300         .tuple_tab = cclk_vlev_datasheet,
1301         .tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
1302         .vr_settling_time = 25 /* us */,
1303 };
1304
1305 static struct platform_device bfin_dpmc = {
1306         .name = "bfin dpmc",
1307         .dev = {
1308                 .platform_data = &bfin_dmpc_vreg_data,
1309         },
1310 };
1311
1312 #if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) || \
1313         defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE) || \
1314         defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE)
1315
1316 #define SPORT_REQ(x) \
1317         [x] = {P_SPORT##x##_TFS, P_SPORT##x##_DTPRI, P_SPORT##x##_TSCLK, \
1318                 P_SPORT##x##_RFS, P_SPORT##x##_DRPRI, P_SPORT##x##_RSCLK, 0}
1319
1320 static const u16 bfin_snd_pin[][7] = {
1321         SPORT_REQ(0),
1322         SPORT_REQ(1),
1323 };
1324
1325 static struct bfin_snd_platform_data bfin_snd_data[] = {
1326         {
1327                 .pin_req = &bfin_snd_pin[0][0],
1328         },
1329         {
1330                 .pin_req = &bfin_snd_pin[1][0],
1331         },
1332 };
1333
1334 #define BFIN_SND_RES(x) \
1335         [x] = { \
1336                 { \
1337                         .start = SPORT##x##_TCR1, \
1338                         .end = SPORT##x##_TCR1, \
1339                         .flags = IORESOURCE_MEM \
1340                 }, \
1341                 { \
1342                         .start = CH_SPORT##x##_RX, \
1343                         .end = CH_SPORT##x##_RX, \
1344                         .flags = IORESOURCE_DMA, \
1345                 }, \
1346                 { \
1347                         .start = CH_SPORT##x##_TX, \
1348                         .end = CH_SPORT##x##_TX, \
1349                         .flags = IORESOURCE_DMA, \
1350                 }, \
1351                 { \
1352                         .start = IRQ_SPORT##x##_ERROR, \
1353                         .end = IRQ_SPORT##x##_ERROR, \
1354                         .flags = IORESOURCE_IRQ, \
1355                 } \
1356         }
1357
1358 static struct resource bfin_snd_resources[][4] = {
1359         BFIN_SND_RES(0),
1360         BFIN_SND_RES(1),
1361 };
1362
1363 static struct platform_device bfin_pcm = {
1364         .name = "bfin-pcm-audio",
1365         .id = -1,
1366 };
1367 #endif
1368
1369 #if defined(CONFIG_SND_BF5XX_SOC_AD73311) || defined(CONFIG_SND_BF5XX_SOC_AD73311_MODULE)
1370 static struct platform_device bfin_ad73311_codec_device = {
1371         .name = "ad73311",
1372         .id = -1,
1373 };
1374 #endif
1375
1376 #if defined(CONFIG_SND_BF5XX_SOC_AD1980) || defined(CONFIG_SND_BF5XX_SOC_AD1980_MODULE)
1377 static struct platform_device bfin_ad1980_codec_device = {
1378         .name = "ad1980",
1379         .id = -1,
1380 };
1381 #endif
1382
1383 #if defined(CONFIG_SND_BF5XX_SOC_I2S) || defined(CONFIG_SND_BF5XX_SOC_I2S_MODULE)
1384 static struct platform_device bfin_i2s = {
1385         .name = "bfin-i2s",
1386         .id = CONFIG_SND_BF5XX_SPORT_NUM,
1387         .num_resources = ARRAY_SIZE(bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM]),
1388         .resource = bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM],
1389         .dev = {
1390                 .platform_data = &bfin_snd_data[CONFIG_SND_BF5XX_SPORT_NUM],
1391         },
1392 };
1393 #endif
1394
1395 #if defined(CONFIG_SND_BF5XX_SOC_TDM) || defined(CONFIG_SND_BF5XX_SOC_TDM_MODULE)
1396 static struct platform_device bfin_tdm = {
1397         .name = "bfin-tdm",
1398         .id = CONFIG_SND_BF5XX_SPORT_NUM,
1399         .num_resources = ARRAY_SIZE(bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM]),
1400         .resource = bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM],
1401         .dev = {
1402                 .platform_data = &bfin_snd_data[CONFIG_SND_BF5XX_SPORT_NUM],
1403         },
1404 };
1405 #endif
1406
1407 #if defined(CONFIG_SND_BF5XX_SOC_AC97) || defined(CONFIG_SND_BF5XX_SOC_AC97_MODULE)
1408 static struct platform_device bfin_ac97 = {
1409         .name = "bfin-ac97",
1410         .id = CONFIG_SND_BF5XX_SPORT_NUM,
1411         .num_resources = ARRAY_SIZE(bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM]),
1412         .resource = bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM],
1413         .dev = {
1414                 .platform_data = &bfin_snd_data[CONFIG_SND_BF5XX_SPORT_NUM],
1415         },
1416 };
1417 #endif
1418
1419 static struct platform_device *ezkit_devices[] __initdata = {
1420
1421         &bfin_dpmc,
1422
1423 #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
1424         &rtc_device,
1425 #endif
1426
1427 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
1428 #ifdef CONFIG_SERIAL_BFIN_UART0
1429         &bfin_uart0_device,
1430 #endif
1431 #ifdef CONFIG_SERIAL_BFIN_UART1
1432         &bfin_uart1_device,
1433 #endif
1434 #ifdef CONFIG_SERIAL_BFIN_UART2
1435         &bfin_uart2_device,
1436 #endif
1437 #ifdef CONFIG_SERIAL_BFIN_UART3
1438         &bfin_uart3_device,
1439 #endif
1440 #endif
1441
1442 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
1443 #ifdef CONFIG_BFIN_SIR0
1444         &bfin_sir0_device,
1445 #endif
1446 #ifdef CONFIG_BFIN_SIR1
1447         &bfin_sir1_device,
1448 #endif
1449 #ifdef CONFIG_BFIN_SIR2
1450         &bfin_sir2_device,
1451 #endif
1452 #ifdef CONFIG_BFIN_SIR3
1453         &bfin_sir3_device,
1454 #endif
1455 #endif
1456
1457 #if defined(CONFIG_FB_BF54X_LQ043) || defined(CONFIG_FB_BF54X_LQ043_MODULE)
1458         &bf54x_lq043_device,
1459 #endif
1460
1461 #if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
1462         &smsc911x_device,
1463 #endif
1464
1465 #if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
1466         &musb_device,
1467 #endif
1468
1469 #if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
1470         &bfin_isp1760_device,
1471 #endif
1472
1473 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
1474 #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
1475         &bfin_sport0_uart_device,
1476 #endif
1477 #ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
1478         &bfin_sport1_uart_device,
1479 #endif
1480 #ifdef CONFIG_SERIAL_BFIN_SPORT2_UART
1481         &bfin_sport2_uart_device,
1482 #endif
1483 #ifdef CONFIG_SERIAL_BFIN_SPORT3_UART
1484         &bfin_sport3_uart_device,
1485 #endif
1486 #endif
1487
1488 #if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE)
1489         &bfin_can0_device,
1490         &bfin_can1_device,
1491 #endif
1492
1493 #if defined(CONFIG_PATA_BF54X) || defined(CONFIG_PATA_BF54X_MODULE)
1494         &bfin_atapi_device,
1495 #endif
1496
1497 #if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
1498         &bf5xx_nand_device,
1499 #endif
1500
1501 #if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE)
1502         &bf54x_sdh_device,
1503 #endif
1504
1505 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
1506         &bf54x_spi_master0,
1507         &bf54x_spi_master1,
1508 #endif
1509
1510 #if defined(CONFIG_KEYBOARD_BFIN) || defined(CONFIG_KEYBOARD_BFIN_MODULE)
1511         &bf54x_kpad_device,
1512 #endif
1513
1514 #if defined(CONFIG_INPUT_BFIN_ROTARY) || defined(CONFIG_INPUT_BFIN_ROTARY_MODULE)
1515         &bfin_rotary_device,
1516 #endif
1517
1518 #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
1519         &i2c_bfin_twi0_device,
1520 #if !defined(CONFIG_BF542)
1521         &i2c_bfin_twi1_device,
1522 #endif
1523 #endif
1524
1525 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
1526         &bfin_device_gpiokeys,
1527 #endif
1528
1529 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
1530         &ezkit_flash_device,
1531 #endif
1532
1533 #if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) || \
1534         defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE) || \
1535         defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE)
1536         &bfin_pcm,
1537 #endif
1538
1539 #if defined(CONFIG_SND_BF5XX_SOC_AD1980) || defined(CONFIG_SND_BF5XX_SOC_AD1980_MODULE)
1540         &bfin_ad1980_codec_device,
1541 #endif
1542
1543 #if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
1544         &bfin_i2s,
1545 #endif
1546
1547 #if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE)
1548         &bfin_tdm,
1549 #endif
1550
1551 #if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE)
1552         &bfin_ac97,
1553 #endif
1554 };
1555
1556 static int __init ezkit_init(void)
1557 {
1558         printk(KERN_INFO "%s(): registering device resources\n", __func__);
1559
1560         i2c_register_board_info(0, bfin_i2c_board_info0,
1561                                 ARRAY_SIZE(bfin_i2c_board_info0));
1562 #if !defined(CONFIG_BF542)      /* The BF542 only has 1 TWI */
1563         i2c_register_board_info(1, bfin_i2c_board_info1,
1564                                 ARRAY_SIZE(bfin_i2c_board_info1));
1565 #endif
1566
1567         platform_add_devices(ezkit_devices, ARRAY_SIZE(ezkit_devices));
1568
1569         spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
1570
1571         return 0;
1572 }
1573
1574 arch_initcall(ezkit_init);
1575
1576 static struct platform_device *ezkit_early_devices[] __initdata = {
1577 #if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
1578 #ifdef CONFIG_SERIAL_BFIN_UART0
1579         &bfin_uart0_device,
1580 #endif
1581 #ifdef CONFIG_SERIAL_BFIN_UART1
1582         &bfin_uart1_device,
1583 #endif
1584 #ifdef CONFIG_SERIAL_BFIN_UART2
1585         &bfin_uart2_device,
1586 #endif
1587 #ifdef CONFIG_SERIAL_BFIN_UART3
1588         &bfin_uart3_device,
1589 #endif
1590 #endif
1591
1592 #if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE)
1593 #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
1594         &bfin_sport0_uart_device,
1595 #endif
1596 #ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
1597         &bfin_sport1_uart_device,
1598 #endif
1599 #ifdef CONFIG_SERIAL_BFIN_SPORT2_UART
1600         &bfin_sport2_uart_device,
1601 #endif
1602 #ifdef CONFIG_SERIAL_BFIN_SPORT3_UART
1603         &bfin_sport3_uart_device,
1604 #endif
1605 #endif
1606 };
1607
1608 void __init native_machine_early_platform_add_devices(void)
1609 {
1610         printk(KERN_INFO "register early platform devices\n");
1611         early_platform_add_devices(ezkit_early_devices,
1612                 ARRAY_SIZE(ezkit_early_devices));
1613 }