arch/blackfin/mach-bf548/boards/ezkit.c

   1 /*
   2  * Copyright 2004-2009 Analog Devices Inc.
   3  *                2005 National ICT Australia (NICTA)
   4  *                      Aidan Williams <aidan@nicta.com.au>
   5  *
   6  * Licensed under the GPL-2 or later.
   7  */
   8
   9 #include <linux/device.h>
  10 #include <linux/platform_device.h>
  11 #include <linux/mtd/mtd.h>
  12 #include <linux/mtd/partitions.h>
  13 #include <linux/mtd/physmap.h>
  14 #include <linux/spi/spi.h>
  15 #include <linux/spi/flash.h>
  16 #include <linux/irq.h>
  17 #include <linux/i2c.h>
  18 #include <linux/interrupt.h>
  19 #include <linux/usb/musb.h>
  20 #include <asm/bfin5xx_spi.h>
  21 #include <asm/dma.h>
  22 #include <asm/gpio.h>
  23 #include <asm/nand.h>
  24 #include <asm/dpmc.h>
  25 #include <asm/portmux.h>
  26 #include <asm/bfin_sdh.h>
  27 #include <mach/bf54x_keys.h>
  28 #include <linux/input.h>
  29 #include <linux/spi/ad7877.h>
  30
  31 /*
  32  * Name the Board for the /proc/cpuinfo
  33  */
  34 const char bfin_board_name[] = "ADI BF548-EZKIT";
  35
  36 /*
  37  *  Driver needs to know address, irq and flag pin.
  38  */
  39
  40 #if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
  41 #include <linux/usb/isp1760.h>
  42 static struct resource bfin_isp1760_resources[] = {
  43         [0] = {
  44                 .start  = 0x2C0C0000,
  45                 .end    = 0x2C0C0000 + 0xfffff,
  46                 .flags  = IORESOURCE_MEM,
  47         },
  48         [1] = {
  49                 .start  = IRQ_PG7,
  50                 .end    = IRQ_PG7,
  51                 .flags  = IORESOURCE_IRQ,
  52         },
  53 };
  54
  55 static struct isp1760_platform_data isp1760_priv = {
  56         .is_isp1761 = 0,
  57         .bus_width_16 = 1,
  58         .port1_otg = 0,
  59         .analog_oc = 0,
  60         .dack_polarity_high = 0,
  61         .dreq_polarity_high = 0,
  62 };
  63
  64 static struct platform_device bfin_isp1760_device = {
  65         .name           = "isp1760",
  66         .id             = 0,
  67         .dev = {
  68                 .platform_data = &isp1760_priv,
  69         },
  70         .num_resources  = ARRAY_SIZE(bfin_isp1760_resources),
  71         .resource       = bfin_isp1760_resources,
  72 };
  73 #endif
  74
  75 #if defined(CONFIG_FB_BF54X_LQ043) || defined(CONFIG_FB_BF54X_LQ043_MODULE)
  76
  77 #include <mach/bf54x-lq043.h>
  78
  79 static struct bfin_bf54xfb_mach_info bf54x_lq043_data = {
  80         .width =        95,
  81         .height =       54,
  82         .xres =         {480, 480, 480},
  83         .yres =         {272, 272, 272},
  84         .bpp =          {24, 24, 24},
  85         .disp =         GPIO_PE3,
  86 };
  87
  88 static struct resource bf54x_lq043_resources[] = {
  89         {
  90                 .start = IRQ_EPPI0_ERR,
  91                 .end = IRQ_EPPI0_ERR,
  92                 .flags = IORESOURCE_IRQ,
  93         },
  94 };
  95
  96 static struct platform_device bf54x_lq043_device = {
  97         .name           = "bf54x-lq043",
  98         .id             = -1,
  99         .num_resources  = ARRAY_SIZE(bf54x_lq043_resources),
 100         .resource       = bf54x_lq043_resources,
 101         .dev            = {
 102                 .platform_data = &bf54x_lq043_data,
 103         },
 104 };
 105 #endif
 106
 107 #if defined(CONFIG_KEYBOARD_BFIN) || defined(CONFIG_KEYBOARD_BFIN_MODULE)
 108 static const unsigned int bf548_keymap[] = {
 109         KEYVAL(0, 0, KEY_ENTER),
 110         KEYVAL(0, 1, KEY_HELP),
 111         KEYVAL(0, 2, KEY_0),
 112         KEYVAL(0, 3, KEY_BACKSPACE),
 113         KEYVAL(1, 0, KEY_TAB),
 114         KEYVAL(1, 1, KEY_9),
 115         KEYVAL(1, 2, KEY_8),
 116         KEYVAL(1, 3, KEY_7),
 117         KEYVAL(2, 0, KEY_DOWN),
 118         KEYVAL(2, 1, KEY_6),
 119         KEYVAL(2, 2, KEY_5),
 120         KEYVAL(2, 3, KEY_4),
 121         KEYVAL(3, 0, KEY_UP),
 122         KEYVAL(3, 1, KEY_3),
 123         KEYVAL(3, 2, KEY_2),
 124         KEYVAL(3, 3, KEY_1),
 125 };
 126
 127 static struct bfin_kpad_platform_data bf54x_kpad_data = {
 128         .rows                   = 4,
 129         .cols                   = 4,
 130         .keymap                 = bf548_keymap,
 131         .keymapsize             = ARRAY_SIZE(bf548_keymap),
 132         .repeat                 = 0,
 133         .debounce_time          = 5000, /* ns (5ms) */
 134         .coldrive_time          = 1000, /* ns (1ms) */
 135         .keyup_test_interval    = 50, /* ms (50ms) */
 136 };
 137
 138 static struct resource bf54x_kpad_resources[] = {
 139         {
 140                 .start = IRQ_KEY,
 141                 .end = IRQ_KEY,
 142                 .flags = IORESOURCE_IRQ,
 143         },
 144 };
 145
 146 static struct platform_device bf54x_kpad_device = {
 147         .name           = "bf54x-keys",
 148         .id             = -1,
 149         .num_resources  = ARRAY_SIZE(bf54x_kpad_resources),
 150         .resource       = bf54x_kpad_resources,
 151         .dev            = {
 152                 .platform_data = &bf54x_kpad_data,
 153         },
 154 };
 155 #endif
 156
 157 #if defined(CONFIG_INPUT_BFIN_ROTARY) || defined(CONFIG_INPUT_BFIN_ROTARY_MODULE)
 158 #include <asm/bfin_rotary.h>
 159
 160 static struct bfin_rotary_platform_data bfin_rotary_data = {
 161         /*.rotary_up_key     = KEY_UP,*/
 162         /*.rotary_down_key   = KEY_DOWN,*/
 163         .rotary_rel_code   = REL_WHEEL,
 164         .rotary_button_key = KEY_ENTER,
 165         .debounce          = 10,        /* 0..17 */
 166         .mode              = ROT_QUAD_ENC | ROT_DEBE,
 167 };
 168
 169 static struct resource bfin_rotary_resources[] = {
 170         {
 171                 .start = IRQ_CNT,
 172                 .end = IRQ_CNT,
 173                 .flags = IORESOURCE_IRQ,
 174         },
 175 };
 176
 177 static struct platform_device bfin_rotary_device = {
 178         .name           = "bfin-rotary",
 179         .id             = -1,
 180         .num_resources  = ARRAY_SIZE(bfin_rotary_resources),
 181         .resource       = bfin_rotary_resources,
 182         .dev            = {
 183                 .platform_data = &bfin_rotary_data,
 184         },
 185 };
 186 #endif
 187
 188 #if defined(CONFIG_INPUT_ADXL34X) || defined(CONFIG_INPUT_ADXL34X_MODULE)
 189 #include <linux/input/adxl34x.h>
 190 static const struct adxl34x_platform_data adxl34x_info = {
 191         .x_axis_offset = 0,
 192         .y_axis_offset = 0,
 193         .z_axis_offset = 0,
 194         .tap_threshold = 0x31,
 195         .tap_duration = 0x10,
 196         .tap_latency = 0x60,
 197         .tap_window = 0xF0,
 198         .tap_axis_control = ADXL_TAP_X_EN | ADXL_TAP_Y_EN | ADXL_TAP_Z_EN,
 199         .act_axis_control = 0xFF,
 200         .activity_threshold = 5,
 201         .inactivity_threshold = 3,
 202         .inactivity_time = 4,
 203         .free_fall_threshold = 0x7,
 204         .free_fall_time = 0x20,
 205         .data_rate = 0x8,
 206         .data_range = ADXL_FULL_RES,
 207
 208         .ev_type = EV_ABS,
 209         .ev_code_x = ABS_X,             /* EV_REL */
 210         .ev_code_y = ABS_Y,             /* EV_REL */
 211         .ev_code_z = ABS_Z,             /* EV_REL */
 212
 213         .ev_code_tap = {BTN_TOUCH, BTN_TOUCH, BTN_TOUCH}, /* EV_KEY x,y,z */
 214
 215 /*      .ev_code_ff = KEY_F,*/          /* EV_KEY */
 216 /*      .ev_code_act_inactivity = KEY_A,*/      /* EV_KEY */
 217         .power_mode = ADXL_AUTO_SLEEP | ADXL_LINK,
 218         .fifo_mode = ADXL_FIFO_STREAM,
 219         .orientation_enable = ADXL_EN_ORIENTATION_3D,
 220         .deadzone_angle = ADXL_DEADZONE_ANGLE_10p8,
 221         .divisor_length = ADXL_LP_FILTER_DIVISOR_16,
 222         /* EV_KEY {+Z, +Y, +X, -X, -Y, -Z} */
 223         .ev_codes_orient_3d = {BTN_Z, BTN_Y, BTN_X, BTN_A, BTN_B, BTN_C},
 224 };
 225 #endif
 226
 227 #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
 228 static struct platform_device rtc_device = {
 229         .name = "rtc-bfin",
 230         .id   = -1,
 231 };
 232 #endif
 233
 234 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
 235 #ifdef CONFIG_SERIAL_BFIN_UART0
 236 static struct resource bfin_uart0_resources[] = {
 237         {
 238                 .start = UART0_DLL,
 239                 .end = UART0_RBR+2,
 240                 .flags = IORESOURCE_MEM,
 241         },
 242         {
 243                 .start = IRQ_UART0_RX,
 244                 .end = IRQ_UART0_RX+1,
 245                 .flags = IORESOURCE_IRQ,
 246         },
 247         {
 248                 .start = IRQ_UART0_ERROR,
 249                 .end = IRQ_UART0_ERROR,
 250                 .flags = IORESOURCE_IRQ,
 251         },
 252         {
 253                 .start = CH_UART0_TX,
 254                 .end = CH_UART0_TX,
 255                 .flags = IORESOURCE_DMA,
 256         },
 257         {
 258                 .start = CH_UART0_RX,
 259                 .end = CH_UART0_RX,
 260                 .flags = IORESOURCE_DMA,
 261         },
 262 };
 263
 264 static unsigned short bfin_uart0_peripherals[] = {
 265         P_UART0_TX, P_UART0_RX, 0
 266 };
 267
 268 static struct platform_device bfin_uart0_device = {
 269         .name = "bfin-uart",
 270         .id = 0,
 271         .num_resources = ARRAY_SIZE(bfin_uart0_resources),
 272         .resource = bfin_uart0_resources,
 273         .dev = {
 274                 .platform_data = &bfin_uart0_peripherals, /* Passed to driver */
 275         },
 276 };
 277 #endif
 278 #ifdef CONFIG_SERIAL_BFIN_UART1
 279 static struct resource bfin_uart1_resources[] = {
 280         {
 281                 .start = UART1_DLL,
 282                 .end = UART1_RBR+2,
 283                 .flags = IORESOURCE_MEM,
 284         },
 285         {
 286                 .start = IRQ_UART1_RX,
 287                 .end = IRQ_UART1_RX+1,
 288                 .flags = IORESOURCE_IRQ,
 289         },
 290         {
 291                 .start = IRQ_UART1_ERROR,
 292                 .end = IRQ_UART1_ERROR,
 293                 .flags = IORESOURCE_IRQ,
 294         },
 295         {
 296                 .start = CH_UART1_TX,
 297                 .end = CH_UART1_TX,
 298                 .flags = IORESOURCE_DMA,
 299         },
 300         {
 301                 .start = CH_UART1_RX,
 302                 .end = CH_UART1_RX,
 303                 .flags = IORESOURCE_DMA,
 304         },
 305 #ifdef CONFIG_BFIN_UART1_CTSRTS
 306         {       /* CTS pin -- 0 means not supported */
 307                 .start = GPIO_PE10,
 308                 .end = GPIO_PE10,
 309                 .flags = IORESOURCE_IO,
 310         },
 311         {       /* RTS pin -- 0 means not supported */
 312                 .start = GPIO_PE9,
 313                 .end = GPIO_PE9,
 314                 .flags = IORESOURCE_IO,
 315         },
 316 #endif
 317 };
 318
 319 static unsigned short bfin_uart1_peripherals[] = {
 320         P_UART1_TX, P_UART1_RX,
 321 #ifdef CONFIG_BFIN_UART1_CTSRTS
 322         P_UART1_RTS, P_UART1_CTS,
 323 #endif
 324         0
 325 };
 326
 327 static struct platform_device bfin_uart1_device = {
 328         .name = "bfin-uart",
 329         .id = 1,
 330         .num_resources = ARRAY_SIZE(bfin_uart1_resources),
 331         .resource = bfin_uart1_resources,
 332         .dev = {
 333                 .platform_data = &bfin_uart1_peripherals, /* Passed to driver */
 334         },
 335 };
 336 #endif
 337 #ifdef CONFIG_SERIAL_BFIN_UART2
 338 static struct resource bfin_uart2_resources[] = {
 339         {
 340                 .start = UART2_DLL,
 341                 .end = UART2_RBR+2,
 342                 .flags = IORESOURCE_MEM,
 343         },
 344         {
 345                 .start = IRQ_UART2_RX,
 346                 .end = IRQ_UART2_RX+1,
 347                 .flags = IORESOURCE_IRQ,
 348         },
 349         {
 350                 .start = IRQ_UART2_ERROR,
 351                 .end = IRQ_UART2_ERROR,
 352                 .flags = IORESOURCE_IRQ,
 353         },
 354         {
 355                 .start = CH_UART2_TX,
 356                 .end = CH_UART2_TX,
 357                 .flags = IORESOURCE_DMA,
 358         },
 359         {
 360                 .start = CH_UART2_RX,
 361                 .end = CH_UART2_RX,
 362                 .flags = IORESOURCE_DMA,
 363         },
 364 };
 365
 366 static unsigned short bfin_uart2_peripherals[] = {
 367         P_UART2_TX, P_UART2_RX, 0
 368 };
 369
 370 static struct platform_device bfin_uart2_device = {
 371         .name = "bfin-uart",
 372         .id = 2,
 373         .num_resources = ARRAY_SIZE(bfin_uart2_resources),
 374         .resource = bfin_uart2_resources,
 375         .dev = {
 376                 .platform_data = &bfin_uart2_peripherals, /* Passed to driver */
 377         },
 378 };
 379 #endif
 380 #ifdef CONFIG_SERIAL_BFIN_UART3
 381 static struct resource bfin_uart3_resources[] = {
 382         {
 383                 .start = UART3_DLL,
 384                 .end = UART3_RBR+2,
 385                 .flags = IORESOURCE_MEM,
 386         },
 387         {
 388                 .start = IRQ_UART3_RX,
 389                 .end = IRQ_UART3_RX+1,
 390                 .flags = IORESOURCE_IRQ,
 391         },
 392         {
 393                 .start = IRQ_UART3_ERROR,
 394                 .end = IRQ_UART3_ERROR,
 395                 .flags = IORESOURCE_IRQ,
 396         },
 397         {
 398                 .start = CH_UART3_TX,
 399                 .end = CH_UART3_TX,
 400                 .flags = IORESOURCE_DMA,
 401         },
 402         {
 403                 .start = CH_UART3_RX,
 404                 .end = CH_UART3_RX,
 405                 .flags = IORESOURCE_DMA,
 406         },
 407 #ifdef CONFIG_BFIN_UART3_CTSRTS
 408         {       /* CTS pin -- 0 means not supported */
 409                 .start = GPIO_PB3,
 410                 .end = GPIO_PB3,
 411                 .flags = IORESOURCE_IO,
 412         },
 413         {       /* RTS pin -- 0 means not supported */
 414                 .start = GPIO_PB2,
 415                 .end = GPIO_PB2,
 416                 .flags = IORESOURCE_IO,
 417         },
 418 #endif
 419 };
 420
 421 static unsigned short bfin_uart3_peripherals[] = {
 422         P_UART3_TX, P_UART3_RX,
 423 #ifdef CONFIG_BFIN_UART3_CTSRTS
 424         P_UART3_RTS, P_UART3_CTS,
 425 #endif
 426         0
 427 };
 428
 429 static struct platform_device bfin_uart3_device = {
 430         .name = "bfin-uart",
 431         .id = 3,
 432         .num_resources = ARRAY_SIZE(bfin_uart3_resources),
 433         .resource = bfin_uart3_resources,
 434         .dev = {
 435                 .platform_data = &bfin_uart3_peripherals, /* Passed to driver */
 436         },
 437 };
 438 #endif
 439 #endif
 440
 441 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
 442 #ifdef CONFIG_BFIN_SIR0
 443 static struct resource bfin_sir0_resources[] = {
 444         {
 445                 .start = 0xFFC00400,
 446                 .end = 0xFFC004FF,
 447                 .flags = IORESOURCE_MEM,
 448         },
 449         {
 450                 .start = IRQ_UART0_RX,
 451                 .end = IRQ_UART0_RX+1,
 452                 .flags = IORESOURCE_IRQ,
 453         },
 454         {
 455                 .start = CH_UART0_RX,
 456                 .end = CH_UART0_RX+1,
 457                 .flags = IORESOURCE_DMA,
 458         },
 459 };
 460 static struct platform_device bfin_sir0_device = {
 461         .name = "bfin_sir",
 462         .id = 0,
 463         .num_resources = ARRAY_SIZE(bfin_sir0_resources),
 464         .resource = bfin_sir0_resources,
 465 };
 466 #endif
 467 #ifdef CONFIG_BFIN_SIR1
 468 static struct resource bfin_sir1_resources[] = {
 469         {
 470                 .start = 0xFFC02000,
 471                 .end = 0xFFC020FF,
 472                 .flags = IORESOURCE_MEM,
 473         },
 474         {
 475                 .start = IRQ_UART1_RX,
 476                 .end = IRQ_UART1_RX+1,
 477                 .flags = IORESOURCE_IRQ,
 478         },
 479         {
 480                 .start = CH_UART1_RX,
 481                 .end = CH_UART1_RX+1,
 482                 .flags = IORESOURCE_DMA,
 483         },
 484 };
 485 static struct platform_device bfin_sir1_device = {
 486         .name = "bfin_sir",
 487         .id = 1,
 488         .num_resources = ARRAY_SIZE(bfin_sir1_resources),
 489         .resource = bfin_sir1_resources,
 490 };
 491 #endif
 492 #ifdef CONFIG_BFIN_SIR2
 493 static struct resource bfin_sir2_resources[] = {
 494         {
 495                 .start = 0xFFC02100,
 496                 .end = 0xFFC021FF,
 497                 .flags = IORESOURCE_MEM,
 498         },
 499         {
 500                 .start = IRQ_UART2_RX,
 501                 .end = IRQ_UART2_RX+1,
 502                 .flags = IORESOURCE_IRQ,
 503         },
 504         {
 505                 .start = CH_UART2_RX,
 506                 .end = CH_UART2_RX+1,
 507                 .flags = IORESOURCE_DMA,
 508         },
 509 };
 510 static struct platform_device bfin_sir2_device = {
 511         .name = "bfin_sir",
 512         .id = 2,
 513         .num_resources = ARRAY_SIZE(bfin_sir2_resources),
 514         .resource = bfin_sir2_resources,
 515 };
 516 #endif
 517 #ifdef CONFIG_BFIN_SIR3
 518 static struct resource bfin_sir3_resources[] = {
 519         {
 520                 .start = 0xFFC03100,
 521                 .end = 0xFFC031FF,
 522                 .flags = IORESOURCE_MEM,
 523         },
 524         {
 525                 .start = IRQ_UART3_RX,
 526                 .end = IRQ_UART3_RX+1,
 527                 .flags = IORESOURCE_IRQ,
 528         },
 529         {
 530                 .start = CH_UART3_RX,
 531                 .end = CH_UART3_RX+1,
 532                 .flags = IORESOURCE_DMA,
 533         },
 534 };
 535 static struct platform_device bfin_sir3_device = {
 536         .name = "bfin_sir",
 537         .id = 3,
 538         .num_resources = ARRAY_SIZE(bfin_sir3_resources),
 539         .resource = bfin_sir3_resources,
 540 };
 541 #endif
 542 #endif
 543
 544 #if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
 545 #include <linux/smsc911x.h>
 546
 547 static struct resource smsc911x_resources[] = {
 548         {
 549                 .name = "smsc911x-memory",
 550                 .start = 0x24000000,
 551                 .end = 0x24000000 + 0xFF,
 552                 .flags = IORESOURCE_MEM,
 553         },
 554         {
 555                 .start = IRQ_PE8,
 556                 .end = IRQ_PE8,
 557                 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
 558         },
 559 };
 560
 561 static struct smsc911x_platform_config smsc911x_config = {
 562         .flags = SMSC911X_USE_32BIT,
 563         .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
 564         .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
 565         .phy_interface = PHY_INTERFACE_MODE_MII,
 566 };
 567
 568 static struct platform_device smsc911x_device = {
 569         .name = "smsc911x",
 570         .id = 0,
 571         .num_resources = ARRAY_SIZE(smsc911x_resources),
 572         .resource = smsc911x_resources,
 573         .dev = {
 574                 .platform_data = &smsc911x_config,
 575         },
 576 };
 577 #endif
 578
 579 #if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
 580 static struct resource musb_resources[] = {
 581         [0] = {
 582                 .start  = 0xFFC03C00,
 583                 .end    = 0xFFC040FF,
 584                 .flags  = IORESOURCE_MEM,
 585         },
 586         [1] = { /* general IRQ */
 587                 .start  = IRQ_USB_INT0,
 588                 .end    = IRQ_USB_INT0,
 589                 .flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
 590                 .name   = "mc"
 591         },
 592         [2] = { /* DMA IRQ */
 593                 .start  = IRQ_USB_DMA,
 594                 .end    = IRQ_USB_DMA,
 595                 .flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
 596                 .name   = "dma"
 597         },
 598 };
 599
 600 static struct musb_hdrc_config musb_config = {
 601         .multipoint     = 0,
 602         .dyn_fifo       = 0,
 603         .soft_con       = 1,
 604         .dma            = 1,
 605         .num_eps        = 8,
 606         .dma_channels   = 8,
 607         .gpio_vrsel     = GPIO_PE7,
 608         /* Some custom boards need to be active low, just set it to "0"
 609          * if it is the case.
 610          */
 611         .gpio_vrsel_active      = 1,
 612         .clkin          = 24,           /* musb CLKIN in MHZ */
 613 };
 614
 615 static struct musb_hdrc_platform_data musb_plat = {
 616 #if defined(CONFIG_USB_MUSB_OTG)
 617         .mode           = MUSB_OTG,
 618 #elif defined(CONFIG_USB_MUSB_HDRC_HCD)
 619         .mode           = MUSB_HOST,
 620 #elif defined(CONFIG_USB_GADGET_MUSB_HDRC)
 621         .mode           = MUSB_PERIPHERAL,
 622 #endif
 623         .config         = &musb_config,
 624 };
 625
 626 static u64 musb_dmamask = ~(u32)0;
 627
 628 static struct platform_device musb_device = {
 629         .name           = "musb-blackfin",
 630         .id             = 0,
 631         .dev = {
 632                 .dma_mask               = &musb_dmamask,
 633                 .coherent_dma_mask      = 0xffffffff,
 634                 .platform_data          = &musb_plat,
 635         },
 636         .num_resources  = ARRAY_SIZE(musb_resources),
 637         .resource       = musb_resources,
 638 };
 639 #endif
 640
 641 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
 642 #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
 643 static struct resource bfin_sport0_uart_resources[] = {
 644         {
 645                 .start = SPORT0_TCR1,
 646                 .end = SPORT0_MRCS3+4,
 647                 .flags = IORESOURCE_MEM,
 648         },
 649         {
 650                 .start = IRQ_SPORT0_RX,
 651                 .end = IRQ_SPORT0_RX+1,
 652                 .flags = IORESOURCE_IRQ,
 653         },
 654         {
 655                 .start = IRQ_SPORT0_ERROR,
 656                 .end = IRQ_SPORT0_ERROR,
 657                 .flags = IORESOURCE_IRQ,
 658         },
 659 };
 660
 661 static unsigned short bfin_sport0_peripherals[] = {
 662         P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
 663         P_SPORT0_DRPRI, P_SPORT0_RSCLK, 0
 664 };
 665
 666 static struct platform_device bfin_sport0_uart_device = {
 667         .name = "bfin-sport-uart",
 668         .id = 0,
 669         .num_resources = ARRAY_SIZE(bfin_sport0_uart_resources),
 670         .resource = bfin_sport0_uart_resources,
 671         .dev = {
 672                 .platform_data = &bfin_sport0_peripherals, /* Passed to driver */
 673         },
 674 };
 675 #endif
 676 #ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
 677 static struct resource bfin_sport1_uart_resources[] = {
 678         {
 679                 .start = SPORT1_TCR1,
 680                 .end = SPORT1_MRCS3+4,
 681                 .flags = IORESOURCE_MEM,
 682         },
 683         {
 684                 .start = IRQ_SPORT1_RX,
 685                 .end = IRQ_SPORT1_RX+1,
 686                 .flags = IORESOURCE_IRQ,
 687         },
 688         {
 689                 .start = IRQ_SPORT1_ERROR,
 690                 .end = IRQ_SPORT1_ERROR,
 691                 .flags = IORESOURCE_IRQ,
 692         },
 693 };
 694
 695 static unsigned short bfin_sport1_peripherals[] = {
 696         P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
 697         P_SPORT1_DRPRI, P_SPORT1_RSCLK, 0
 698 };
 699
 700 static struct platform_device bfin_sport1_uart_device = {
 701         .name = "bfin-sport-uart",
 702         .id = 1,
 703         .num_resources = ARRAY_SIZE(bfin_sport1_uart_resources),
 704         .resource = bfin_sport1_uart_resources,
 705         .dev = {
 706                 .platform_data = &bfin_sport1_peripherals, /* Passed to driver */
 707         },
 708 };
 709 #endif
 710 #ifdef CONFIG_SERIAL_BFIN_SPORT2_UART
 711 static struct resource bfin_sport2_uart_resources[] = {
 712         {
 713                 .start = SPORT2_TCR1,
 714                 .end = SPORT2_MRCS3+4,
 715                 .flags = IORESOURCE_MEM,
 716         },
 717         {
 718                 .start = IRQ_SPORT2_RX,
 719                 .end = IRQ_SPORT2_RX+1,
 720                 .flags = IORESOURCE_IRQ,
 721         },
 722         {
 723                 .start = IRQ_SPORT2_ERROR,
 724                 .end = IRQ_SPORT2_ERROR,
 725                 .flags = IORESOURCE_IRQ,
 726         },
 727 };
 728
 729 static unsigned short bfin_sport2_peripherals[] = {
 730         P_SPORT2_TFS, P_SPORT2_DTPRI, P_SPORT2_TSCLK, P_SPORT2_RFS,
 731         P_SPORT2_DRPRI, P_SPORT2_RSCLK, P_SPORT2_DRSEC, P_SPORT2_DTSEC, 0
 732 };
 733
 734 static struct platform_device bfin_sport2_uart_device = {
 735         .name = "bfin-sport-uart",
 736         .id = 2,
 737         .num_resources = ARRAY_SIZE(bfin_sport2_uart_resources),
 738         .resource = bfin_sport2_uart_resources,
 739         .dev = {
 740                 .platform_data = &bfin_sport2_peripherals, /* Passed to driver */
 741         },
 742 };
 743 #endif
 744 #ifdef CONFIG_SERIAL_BFIN_SPORT3_UART
 745 static struct resource bfin_sport3_uart_resources[] = {
 746         {
 747                 .start = SPORT3_TCR1,
 748                 .end = SPORT3_MRCS3+4,
 749                 .flags = IORESOURCE_MEM,
 750         },
 751         {
 752                 .start = IRQ_SPORT3_RX,
 753                 .end = IRQ_SPORT3_RX+1,
 754                 .flags = IORESOURCE_IRQ,
 755         },
 756         {
 757                 .start = IRQ_SPORT3_ERROR,
 758                 .end = IRQ_SPORT3_ERROR,
 759                 .flags = IORESOURCE_IRQ,
 760         },
 761 };
 762
 763 static unsigned short bfin_sport3_peripherals[] = {
 764         P_SPORT3_TFS, P_SPORT3_DTPRI, P_SPORT3_TSCLK, P_SPORT3_RFS,
 765         P_SPORT3_DRPRI, P_SPORT3_RSCLK, P_SPORT3_DRSEC, P_SPORT3_DTSEC, 0
 766 };
 767
 768 static struct platform_device bfin_sport3_uart_device = {
 769         .name = "bfin-sport-uart",
 770         .id = 3,
 771         .num_resources = ARRAY_SIZE(bfin_sport3_uart_resources),
 772         .resource = bfin_sport3_uart_resources,
 773         .dev = {
 774                 .platform_data = &bfin_sport3_peripherals, /* Passed to driver */
 775         },
 776 };
 777 #endif
 778 #endif
 779
 780 #if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE)
 781
 782 static unsigned short bfin_can0_peripherals[] = {
 783         P_CAN0_RX, P_CAN0_TX, 0
 784 };
 785
 786 static struct resource bfin_can0_resources[] = {
 787         {
 788                 .start = 0xFFC02A00,
 789                 .end = 0xFFC02FFF,
 790                 .flags = IORESOURCE_MEM,
 791         },
 792         {
 793                 .start = IRQ_CAN0_RX,
 794                 .end = IRQ_CAN0_RX,
 795                 .flags = IORESOURCE_IRQ,
 796         },
 797         {
 798                 .start = IRQ_CAN0_TX,
 799                 .end = IRQ_CAN0_TX,
 800                 .flags = IORESOURCE_IRQ,
 801         },
 802         {
 803                 .start = IRQ_CAN0_ERROR,
 804                 .end = IRQ_CAN0_ERROR,
 805                 .flags = IORESOURCE_IRQ,
 806         },
 807 };
 808
 809 static struct platform_device bfin_can0_device = {
 810         .name = "bfin_can",
 811         .id = 0,
 812         .num_resources = ARRAY_SIZE(bfin_can0_resources),
 813         .resource = bfin_can0_resources,
 814         .dev = {
 815                 .platform_data = &bfin_can0_peripherals, /* Passed to driver */
 816         },
 817 };
 818
 819 static unsigned short bfin_can1_peripherals[] = {
 820         P_CAN1_RX, P_CAN1_TX, 0
 821 };
 822
 823 static struct resource bfin_can1_resources[] = {
 824         {
 825                 .start = 0xFFC03200,
 826                 .end = 0xFFC037FF,
 827                 .flags = IORESOURCE_MEM,
 828         },
 829         {
 830                 .start = IRQ_CAN1_RX,
 831                 .end = IRQ_CAN1_RX,
 832                 .flags = IORESOURCE_IRQ,
 833         },
 834         {
 835                 .start = IRQ_CAN1_TX,
 836                 .end = IRQ_CAN1_TX,
 837                 .flags = IORESOURCE_IRQ,
 838         },
 839         {
 840                 .start = IRQ_CAN1_ERROR,
 841                 .end = IRQ_CAN1_ERROR,
 842                 .flags = IORESOURCE_IRQ,
 843         },
 844 };
 845
 846 static struct platform_device bfin_can1_device = {
 847         .name = "bfin_can",
 848         .id = 1,
 849         .num_resources = ARRAY_SIZE(bfin_can1_resources),
 850         .resource = bfin_can1_resources,
 851         .dev = {
 852                 .platform_data = &bfin_can1_peripherals, /* Passed to driver */
 853         },
 854 };
 855
 856 #endif
 857
 858 #if defined(CONFIG_PATA_BF54X) || defined(CONFIG_PATA_BF54X_MODULE)
 859 static struct resource bfin_atapi_resources[] = {
 860         {
 861                 .start = 0xFFC03800,
 862                 .end = 0xFFC0386F,
 863                 .flags = IORESOURCE_MEM,
 864         },
 865         {
 866                 .start = IRQ_ATAPI_ERR,
 867                 .end = IRQ_ATAPI_ERR,
 868                 .flags = IORESOURCE_IRQ,
 869         },
 870 };
 871
 872 static struct platform_device bfin_atapi_device = {
 873         .name = "pata-bf54x",
 874         .id = -1,
 875         .num_resources = ARRAY_SIZE(bfin_atapi_resources),
 876         .resource = bfin_atapi_resources,
 877 };
 878 #endif
 879
 880 #if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
 881 static struct mtd_partition partition_info[] = {
 882         {
 883                 .name = "bootloader(nand)",
 884                 .offset = 0,
 885                 .size = 0x80000,
 886         }, {
 887                 .name = "linux kernel(nand)",
 888                 .offset = MTDPART_OFS_APPEND,
 889                 .size = 4 * 1024 * 1024,
 890         },
 891         {
 892                 .name = "file system(nand)",
 893                 .offset = MTDPART_OFS_APPEND,
 894                 .size = MTDPART_SIZ_FULL,
 895         },
 896 };
 897
 898 static struct bf5xx_nand_platform bf5xx_nand_platform = {
 899         .data_width = NFC_NWIDTH_8,
 900         .partitions = partition_info,
 901         .nr_partitions = ARRAY_SIZE(partition_info),
 902         .rd_dly = 3,
 903         .wr_dly = 3,
 904 };
 905
 906 static struct resource bf5xx_nand_resources[] = {
 907         {
 908                 .start = 0xFFC03B00,
 909                 .end = 0xFFC03B4F,
 910                 .flags = IORESOURCE_MEM,
 911         },
 912         {
 913                 .start = CH_NFC,
 914                 .end = CH_NFC,
 915                 .flags = IORESOURCE_IRQ,
 916         },
 917 };
 918
 919 static struct platform_device bf5xx_nand_device = {
 920         .name = "bf5xx-nand",
 921         .id = 0,
 922         .num_resources = ARRAY_SIZE(bf5xx_nand_resources),
 923         .resource = bf5xx_nand_resources,
 924         .dev = {
 925                 .platform_data = &bf5xx_nand_platform,
 926         },
 927 };
 928 #endif
 929
 930 #if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE)
 931
 932 static struct bfin_sd_host bfin_sdh_data = {
 933         .dma_chan = CH_SDH,
 934         .irq_int0 = IRQ_SDH_MASK0,
 935         .pin_req = {P_SD_D0, P_SD_D1, P_SD_D2, P_SD_D3, P_SD_CLK, P_SD_CMD, 0},
 936 };
 937
 938 static struct platform_device bf54x_sdh_device = {
 939         .name = "bfin-sdh",
 940         .id = 0,
 941         .dev = {
 942                 .platform_data = &bfin_sdh_data,
 943         },
 944 };
 945 #endif
 946
 947 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
 948 static struct mtd_partition ezkit_partitions[] = {
 949         {
 950                 .name       = "bootloader(nor)",
 951                 .size       = 0x80000,
 952                 .offset     = 0,
 953         }, {
 954                 .name       = "linux kernel(nor)",
 955                 .size       = 0x400000,
 956                 .offset     = MTDPART_OFS_APPEND,
 957         }, {
 958                 .name       = "file system(nor)",
 959                 .size       = MTDPART_SIZ_FULL,
 960                 .offset     = MTDPART_OFS_APPEND,
 961         }
 962 };
 963
 964 static struct physmap_flash_data ezkit_flash_data = {
 965         .width      = 2,
 966         .parts      = ezkit_partitions,
 967         .nr_parts   = ARRAY_SIZE(ezkit_partitions),
 968 };
 969
 970 static struct resource ezkit_flash_resource = {
 971         .start = 0x20000000,
 972         .end   = 0x21ffffff,
 973         .flags = IORESOURCE_MEM,
 974 };
 975
 976 static struct platform_device ezkit_flash_device = {
 977         .name          = "physmap-flash",
 978         .id            = 0,
 979         .dev = {
 980                 .platform_data = &ezkit_flash_data,
 981         },
 982         .num_resources = 1,
 983         .resource      = &ezkit_flash_resource,
 984 };
 985 #endif
 986
 987 #if defined(CONFIG_MTD_M25P80) \
 988         || defined(CONFIG_MTD_M25P80_MODULE)
 989 /* SPI flash chip (m25p16) */
 990 static struct mtd_partition bfin_spi_flash_partitions[] = {
 991         {
 992                 .name = "bootloader(spi)",
 993                 .size = 0x00080000,
 994                 .offset = 0,
 995                 .mask_flags = MTD_CAP_ROM
 996         }, {
 997                 .name = "linux kernel(spi)",
 998                 .size = MTDPART_SIZ_FULL,
 999                 .offset = MTDPART_OFS_APPEND,
1000         }
1001 };
1002
1003 static struct flash_platform_data bfin_spi_flash_data = {
1004         .name = "m25p80",
1005         .parts = bfin_spi_flash_partitions,
1006         .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
1007         .type = "m25p16",
1008 };
1009
1010 static struct bfin5xx_spi_chip spi_flash_chip_info = {
1011         .enable_dma = 0,         /* use dma transfer with this chip*/
1012         .bits_per_word = 8,
1013 };
1014 #endif
1015
1016 #if defined(CONFIG_SND_BF5XX_SOC_AD183X) \
1017         || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE)
1018 static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
1019         .enable_dma = 0,
1020         .bits_per_word = 16,
1021 };
1022 #endif
1023
1024 #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
1025 static struct bfin5xx_spi_chip spi_ad7877_chip_info = {
1026         .enable_dma = 0,
1027         .bits_per_word = 16,
1028 };
1029
1030 static const struct ad7877_platform_data bfin_ad7877_ts_info = {
1031         .model                  = 7877,
1032         .vref_delay_usecs       = 50,   /* internal, no capacitor */
1033         .x_plate_ohms           = 419,
1034         .y_plate_ohms           = 486,
1035         .pressure_max           = 1000,
1036         .pressure_min           = 0,
1037         .stopacq_polarity       = 1,
1038         .first_conversion_delay = 3,
1039         .acquisition_time       = 1,
1040         .averaging              = 1,
1041         .pen_down_acc_interval  = 1,
1042 };
1043 #endif
1044
1045 #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
1046 static struct bfin5xx_spi_chip spidev_chip_info = {
1047         .enable_dma = 0,
1048         .bits_per_word = 8,
1049 };
1050 #endif
1051
1052 #if defined(CONFIG_INPUT_ADXL34X_SPI) || defined(CONFIG_INPUT_ADXL34X_SPI_MODULE)
1053 static struct bfin5xx_spi_chip spi_adxl34x_chip_info = {
1054         .enable_dma = 0,         /* use dma transfer with this chip*/
1055         .bits_per_word = 8,
1056 };
1057 #endif
1058
1059 static struct spi_board_info bfin_spi_board_info[] __initdata = {
1060 #if defined(CONFIG_MTD_M25P80) \
1061         || defined(CONFIG_MTD_M25P80_MODULE)
1062         {
1063                 /* the modalias must be the same as spi device driver name */
1064                 .modalias = "m25p80", /* Name of spi_driver for this device */
1065                 .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
1066                 .bus_num = 0, /* Framework bus number */
1067                 .chip_select = 1, /* SPI_SSEL1*/
1068                 .platform_data = &bfin_spi_flash_data,
1069                 .controller_data = &spi_flash_chip_info,
1070                 .mode = SPI_MODE_3,
1071         },
1072 #endif
1073 #if defined(CONFIG_SND_BF5XX_SOC_AD183X) \
1074         || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE)
1075         {
1076                 .modalias = "ad183x",
1077                 .max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
1078                 .bus_num = 1,
1079                 .chip_select = 4,
1080                 .controller_data = &ad1836_spi_chip_info,
1081         },
1082 #endif
1083 #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
1084         {
1085                 .modalias               = "ad7877",
1086                 .platform_data          = &bfin_ad7877_ts_info,
1087                 .irq                    = IRQ_PB4,      /* old boards (<=Rev 1.3) use IRQ_PJ11 */
1088                 .max_speed_hz           = 12500000,     /* max spi clock (SCK) speed in HZ */
1089                 .bus_num                = 0,
1090                 .chip_select            = 2,
1091                 .controller_data = &spi_ad7877_chip_info,
1092         },
1093 #endif
1094 #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
1095         {
1096                 .modalias = "spidev",
1097                 .max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
1098                 .bus_num = 0,
1099                 .chip_select = 1,
1100                 .controller_data = &spidev_chip_info,
1101         },
1102 #endif
1103 #if defined(CONFIG_INPUT_ADXL34X_SPI) || defined(CONFIG_INPUT_ADXL34X_SPI_MODULE)
1104         {
1105                 .modalias               = "adxl34x",
1106                 .platform_data          = &adxl34x_info,
1107                 .irq                    = IRQ_PC5,
1108                 .max_speed_hz           = 5000000,     /* max spi clock (SCK) speed in HZ */
1109                 .bus_num                = 1,
1110                 .chip_select            = 2,
1111                 .controller_data = &spi_adxl34x_chip_info,
1112                 .mode = SPI_MODE_3,
1113         },
1114 #endif
1115 };
1116 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
1117 /* SPI (0) */
1118 static struct resource bfin_spi0_resource[] = {
1119         [0] = {
1120                 .start = SPI0_REGBASE,
1121                 .end   = SPI0_REGBASE + 0xFF,
1122                 .flags = IORESOURCE_MEM,
1123         },
1124         [1] = {
1125                 .start = CH_SPI0,
1126                 .end   = CH_SPI0,
1127                 .flags = IORESOURCE_DMA,
1128         },
1129         [2] = {
1130                 .start = IRQ_SPI0,
1131                 .end   = IRQ_SPI0,
1132                 .flags = IORESOURCE_IRQ,
1133         }
1134 };
1135
1136 /* SPI (1) */
1137 static struct resource bfin_spi1_resource[] = {
1138         [0] = {
1139                 .start = SPI1_REGBASE,
1140                 .end   = SPI1_REGBASE + 0xFF,
1141                 .flags = IORESOURCE_MEM,
1142         },
1143         [1] = {
1144                 .start = CH_SPI1,
1145                 .end   = CH_SPI1,
1146                 .flags = IORESOURCE_DMA,
1147         },
1148         [2] = {
1149                 .start = IRQ_SPI1,
1150                 .end   = IRQ_SPI1,
1151                 .flags = IORESOURCE_IRQ,
1152         }
1153 };
1154
1155 /* SPI controller data */
1156 static struct bfin5xx_spi_master bf54x_spi_master_info0 = {
1157         .num_chipselect = 4,
1158         .enable_dma = 1,  /* master has the ability to do dma transfer */
1159         .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
1160 };
1161
1162 static struct platform_device bf54x_spi_master0 = {
1163         .name = "bfin-spi",
1164         .id = 0, /* Bus number */
1165         .num_resources = ARRAY_SIZE(bfin_spi0_resource),
1166         .resource = bfin_spi0_resource,
1167         .dev = {
1168                 .platform_data = &bf54x_spi_master_info0, /* Passed to driver */
1169                 },
1170 };
1171
1172 static struct bfin5xx_spi_master bf54x_spi_master_info1 = {
1173         .num_chipselect = 4,
1174         .enable_dma = 1,  /* master has the ability to do dma transfer */
1175         .pin_req = {P_SPI1_SCK, P_SPI1_MISO, P_SPI1_MOSI, 0},
1176 };
1177
1178 static struct platform_device bf54x_spi_master1 = {
1179         .name = "bfin-spi",
1180         .id = 1, /* Bus number */
1181         .num_resources = ARRAY_SIZE(bfin_spi1_resource),
1182         .resource = bfin_spi1_resource,
1183         .dev = {
1184                 .platform_data = &bf54x_spi_master_info1, /* Passed to driver */
1185                 },
1186 };
1187 #endif  /* spi master and devices */
1188
1189 #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
1190 static struct resource bfin_twi0_resource[] = {
1191         [0] = {
1192                 .start = TWI0_REGBASE,
1193                 .end   = TWI0_REGBASE + 0xFF,
1194                 .flags = IORESOURCE_MEM,
1195         },
1196         [1] = {
1197                 .start = IRQ_TWI0,
1198                 .end   = IRQ_TWI0,
1199                 .flags = IORESOURCE_IRQ,
1200         },
1201 };
1202
1203 static struct platform_device i2c_bfin_twi0_device = {
1204         .name = "i2c-bfin-twi",
1205         .id = 0,
1206         .num_resources = ARRAY_SIZE(bfin_twi0_resource),
1207         .resource = bfin_twi0_resource,
1208 };
1209
1210 #if !defined(CONFIG_BF542)      /* The BF542 only has 1 TWI */
1211 static struct resource bfin_twi1_resource[] = {
1212         [0] = {
1213                 .start = TWI1_REGBASE,
1214                 .end   = TWI1_REGBASE + 0xFF,
1215                 .flags = IORESOURCE_MEM,
1216         },
1217         [1] = {
1218                 .start = IRQ_TWI1,
1219                 .end   = IRQ_TWI1,
1220                 .flags = IORESOURCE_IRQ,
1221         },
1222 };
1223
1224 static struct platform_device i2c_bfin_twi1_device = {
1225         .name = "i2c-bfin-twi",
1226         .id = 1,
1227         .num_resources = ARRAY_SIZE(bfin_twi1_resource),
1228         .resource = bfin_twi1_resource,
1229 };
1230 #endif
1231 #endif
1232
1233 static struct i2c_board_info __initdata bfin_i2c_board_info0[] = {
1234 };
1235
1236 #if !defined(CONFIG_BF542)      /* The BF542 only has 1 TWI */
1237 static struct i2c_board_info __initdata bfin_i2c_board_info1[] = {
1238 #if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
1239         {
1240                 I2C_BOARD_INFO("pcf8574_lcd", 0x22),
1241         },
1242 #endif
1243 #if defined(CONFIG_INPUT_PCF8574) || defined(CONFIG_INPUT_PCF8574_MODULE)
1244         {
1245                 I2C_BOARD_INFO("pcf8574_keypad", 0x27),
1246                 .irq = 212,
1247         },
1248 #endif
1249 #if defined(CONFIG_INPUT_ADXL34X_I2C) || defined(CONFIG_INPUT_ADXL34X_I2C_MODULE)
1250         {
1251                 I2C_BOARD_INFO("adxl34x", 0x53),
1252                 .irq = IRQ_PC5,
1253                 .platform_data = (void *)&adxl34x_info,
1254         },
1255 #endif
1256 #if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
1257         {
1258                 I2C_BOARD_INFO("ad5252", 0x2f),
1259         },
1260 #endif
1261 };
1262 #endif
1263
1264 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
1265 #include <linux/gpio_keys.h>
1266
1267 static struct gpio_keys_button bfin_gpio_keys_table[] = {
1268         {BTN_0, GPIO_PB8, 1, "gpio-keys: BTN0"},
1269         {BTN_1, GPIO_PB9, 1, "gpio-keys: BTN1"},
1270         {BTN_2, GPIO_PB10, 1, "gpio-keys: BTN2"},
1271         {BTN_3, GPIO_PB11, 1, "gpio-keys: BTN3"},
1272 };
1273
1274 static struct gpio_keys_platform_data bfin_gpio_keys_data = {
1275         .buttons        = bfin_gpio_keys_table,
1276         .nbuttons       = ARRAY_SIZE(bfin_gpio_keys_table),
1277 };
1278
1279 static struct platform_device bfin_device_gpiokeys = {
1280         .name      = "gpio-keys",
1281         .dev = {
1282                 .platform_data = &bfin_gpio_keys_data,
1283         },
1284 };
1285 #endif
1286
1287 static const unsigned int cclk_vlev_datasheet[] =
1288 {
1289 /*
1290  * Internal VLEV BF54XSBBC1533
1291  ****temporarily using these values until data sheet is updated
1292  */
1293         VRPAIR(VLEV_085, 150000000),
1294         VRPAIR(VLEV_090, 250000000),
1295         VRPAIR(VLEV_110, 276000000),
1296         VRPAIR(VLEV_115, 301000000),
1297         VRPAIR(VLEV_120, 525000000),
1298         VRPAIR(VLEV_125, 550000000),
1299         VRPAIR(VLEV_130, 600000000),
1300 };
1301
1302 static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
1303         .tuple_tab = cclk_vlev_datasheet,
1304         .tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
1305         .vr_settling_time = 25 /* us */,
1306 };
1307
1308 static struct platform_device bfin_dpmc = {
1309         .name = "bfin dpmc",
1310         .dev = {
1311                 .platform_data = &bfin_dmpc_vreg_data,
1312         },
1313 };
1314
1315 #if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
1316 static struct platform_device bfin_i2s = {
1317         .name = "bfin-i2s",
1318         .id = CONFIG_SND_BF5XX_SPORT_NUM,
1319         /* TODO: add platform data here */
1320 };
1321 #endif
1322
1323 #if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE)
1324 static struct platform_device bfin_tdm = {
1325         .name = "bfin-tdm",
1326         .id = CONFIG_SND_BF5XX_SPORT_NUM,
1327         /* TODO: add platform data here */
1328 };
1329 #endif
1330
1331 #if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE)
1332 static struct platform_device bfin_ac97 = {
1333         .name = "bfin-ac97",
1334         .id = CONFIG_SND_BF5XX_SPORT_NUM,
1335         /* TODO: add platform data here */
1336 };
1337 #endif
1338
1339 static struct platform_device *ezkit_devices[] __initdata = {
1340
1341         &bfin_dpmc,
1342
1343 #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
1344         &rtc_device,
1345 #endif
1346
1347 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
1348 #ifdef CONFIG_SERIAL_BFIN_UART0
1349         &bfin_uart0_device,
1350 #endif
1351 #ifdef CONFIG_SERIAL_BFIN_UART1
1352         &bfin_uart1_device,
1353 #endif
1354 #ifdef CONFIG_SERIAL_BFIN_UART2
1355         &bfin_uart2_device,
1356 #endif
1357 #ifdef CONFIG_SERIAL_BFIN_UART3
1358         &bfin_uart3_device,
1359 #endif
1360 #endif
1361
1362 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
1363 #ifdef CONFIG_BFIN_SIR0
1364         &bfin_sir0_device,
1365 #endif
1366 #ifdef CONFIG_BFIN_SIR1
1367         &bfin_sir1_device,
1368 #endif
1369 #ifdef CONFIG_BFIN_SIR2
1370         &bfin_sir2_device,
1371 #endif
1372 #ifdef CONFIG_BFIN_SIR3
1373         &bfin_sir3_device,
1374 #endif
1375 #endif
1376
1377 #if defined(CONFIG_FB_BF54X_LQ043) || defined(CONFIG_FB_BF54X_LQ043_MODULE)
1378         &bf54x_lq043_device,
1379 #endif
1380
1381 #if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
1382         &smsc911x_device,
1383 #endif
1384
1385 #if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
1386         &musb_device,
1387 #endif
1388
1389 #if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
1390         &bfin_isp1760_device,
1391 #endif
1392
1393 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
1394 #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
1395         &bfin_sport0_uart_device,
1396 #endif
1397 #ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
1398         &bfin_sport1_uart_device,
1399 #endif
1400 #ifdef CONFIG_SERIAL_BFIN_SPORT2_UART
1401         &bfin_sport2_uart_device,
1402 #endif
1403 #ifdef CONFIG_SERIAL_BFIN_SPORT3_UART
1404         &bfin_sport3_uart_device,
1405 #endif
1406 #endif
1407
1408 #if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE)
1409         &bfin_can0_device,
1410         &bfin_can1_device,
1411 #endif
1412
1413 #if defined(CONFIG_PATA_BF54X) || defined(CONFIG_PATA_BF54X_MODULE)
1414         &bfin_atapi_device,
1415 #endif
1416
1417 #if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
1418         &bf5xx_nand_device,
1419 #endif
1420
1421 #if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE)
1422         &bf54x_sdh_device,
1423 #endif
1424
1425 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
1426         &bf54x_spi_master0,
1427         &bf54x_spi_master1,
1428 #endif
1429
1430 #if defined(CONFIG_KEYBOARD_BFIN) || defined(CONFIG_KEYBOARD_BFIN_MODULE)
1431         &bf54x_kpad_device,
1432 #endif
1433
1434 #if defined(CONFIG_INPUT_BFIN_ROTARY) || defined(CONFIG_INPUT_BFIN_ROTARY_MODULE)
1435         &bfin_rotary_device,
1436 #endif
1437
1438 #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
1439         &i2c_bfin_twi0_device,
1440 #if !defined(CONFIG_BF542)
1441         &i2c_bfin_twi1_device,
1442 #endif
1443 #endif
1444
1445 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
1446         &bfin_device_gpiokeys,
1447 #endif
1448
1449 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
1450         &ezkit_flash_device,
1451 #endif
1452
1453 #if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
1454         &bfin_i2s,
1455 #endif
1456
1457 #if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE)
1458         &bfin_tdm,
1459 #endif
1460
1461 #if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE)
1462         &bfin_ac97,
1463 #endif
1464 };
1465
1466 static int __init ezkit_init(void)
1467 {
1468         printk(KERN_INFO "%s(): registering device resources\n", __func__);
1469
1470         i2c_register_board_info(0, bfin_i2c_board_info0,
1471                                 ARRAY_SIZE(bfin_i2c_board_info0));
1472 #if !defined(CONFIG_BF542)      /* The BF542 only has 1 TWI */
1473         i2c_register_board_info(1, bfin_i2c_board_info1,
1474                                 ARRAY_SIZE(bfin_i2c_board_info1));
1475 #endif
1476
1477         platform_add_devices(ezkit_devices, ARRAY_SIZE(ezkit_devices));
1478
1479         spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
1480
1481         return 0;
1482 }
1483
1484 arch_initcall(ezkit_init);
1485
1486 static struct platform_device *ezkit_early_devices[] __initdata = {
1487 #if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
1488 #ifdef CONFIG_SERIAL_BFIN_UART0
1489         &bfin_uart0_device,
1490 #endif
1491 #ifdef CONFIG_SERIAL_BFIN_UART1
1492         &bfin_uart1_device,
1493 #endif
1494 #ifdef CONFIG_SERIAL_BFIN_UART2
1495         &bfin_uart2_device,
1496 #endif
1497 #ifdef CONFIG_SERIAL_BFIN_UART3
1498         &bfin_uart3_device,
1499 #endif
1500 #endif
1501
1502 #if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE)
1503 #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
1504         &bfin_sport0_uart_device,
1505 #endif
1506 #ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
1507         &bfin_sport1_uart_device,
1508 #endif
1509 #ifdef CONFIG_SERIAL_BFIN_SPORT2_UART
1510         &bfin_sport2_uart_device,
1511 #endif
1512 #ifdef CONFIG_SERIAL_BFIN_SPORT3_UART
1513         &bfin_sport3_uart_device,
1514 #endif
1515 #endif
1516 };
1517
1518 void __init native_machine_early_platform_add_devices(void)
1519 {
1520         printk(KERN_INFO "register early platform devices\n");
1521         early_platform_add_devices(ezkit_early_devices,
1522                 ARRAY_SIZE(ezkit_early_devices));
1523 }