arch/blackfin/mach-bf548/boards/ezkit.c

   1 /*
   2  * Copyright 2004-2009 Analog Devices Inc.
   3  *                2005 National ICT Australia (NICTA)
   4  *                      Aidan Williams <aidan@nicta.com.au>
   5  *
   6  * Licensed under the GPL-2 or later.
   7  */
   8
   9 #include <linux/device.h>
  10 #include <linux/platform_device.h>
  11 #include <linux/mtd/mtd.h>
  12 #include <linux/mtd/partitions.h>
  13 #include <linux/mtd/physmap.h>
  14 #include <linux/spi/spi.h>
  15 #include <linux/spi/flash.h>
  16 #include <linux/irq.h>
  17 #include <linux/i2c.h>
  18 #include <linux/interrupt.h>
  19 #include <linux/usb/musb.h>
  20 #include <asm/bfin5xx_spi.h>
  21 #include <asm/dma.h>
  22 #include <asm/gpio.h>
  23 #include <asm/nand.h>
  24 #include <asm/dpmc.h>
  25 #include <asm/bfin_sport.h>
  26 #include <asm/portmux.h>
  27 #include <asm/bfin_sdh.h>
  28 #include <mach/bf54x_keys.h>
  29 #include <linux/input.h>
  30 #include <linux/spi/ad7877.h>
  31
  32 /*
  33  * Name the Board for the /proc/cpuinfo
  34  */
  35 const char bfin_board_name[] = "ADI BF548-EZKIT";
  36
  37 /*
  38  *  Driver needs to know address, irq and flag pin.
  39  */
  40
  41 #if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
  42 #include <linux/usb/isp1760.h>
  43 static struct resource bfin_isp1760_resources[] = {
  44         [0] = {
  45                 .start  = 0x2C0C0000,
  46                 .end    = 0x2C0C0000 + 0xfffff,
  47                 .flags  = IORESOURCE_MEM,
  48         },
  49         [1] = {
  50                 .start  = IRQ_PG7,
  51                 .end    = IRQ_PG7,
  52                 .flags  = IORESOURCE_IRQ,
  53         },
  54 };
  55
  56 static struct isp1760_platform_data isp1760_priv = {
  57         .is_isp1761 = 0,
  58         .bus_width_16 = 1,
  59         .port1_otg = 0,
  60         .analog_oc = 0,
  61         .dack_polarity_high = 0,
  62         .dreq_polarity_high = 0,
  63 };
  64
  65 static struct platform_device bfin_isp1760_device = {
  66         .name           = "isp1760",
  67         .id             = 0,
  68         .dev = {
  69                 .platform_data = &isp1760_priv,
  70         },
  71         .num_resources  = ARRAY_SIZE(bfin_isp1760_resources),
  72         .resource       = bfin_isp1760_resources,
  73 };
  74 #endif
  75
  76 #if defined(CONFIG_FB_BF54X_LQ043) || defined(CONFIG_FB_BF54X_LQ043_MODULE)
  77
  78 #include <mach/bf54x-lq043.h>
  79
  80 static struct bfin_bf54xfb_mach_info bf54x_lq043_data = {
  81         .width =        95,
  82         .height =       54,
  83         .xres =         {480, 480, 480},
  84         .yres =         {272, 272, 272},
  85         .bpp =          {24, 24, 24},
  86         .disp =         GPIO_PE3,
  87 };
  88
  89 static struct resource bf54x_lq043_resources[] = {
  90         {
  91                 .start = IRQ_EPPI0_ERR,
  92                 .end = IRQ_EPPI0_ERR,
  93                 .flags = IORESOURCE_IRQ,
  94         },
  95 };
  96
  97 static struct platform_device bf54x_lq043_device = {
  98         .name           = "bf54x-lq043",
  99         .id             = -1,
 100         .num_resources  = ARRAY_SIZE(bf54x_lq043_resources),
 101         .resource       = bf54x_lq043_resources,
 102         .dev            = {
 103                 .platform_data = &bf54x_lq043_data,
 104         },
 105 };
 106 #endif
 107
 108 #if defined(CONFIG_KEYBOARD_BFIN) || defined(CONFIG_KEYBOARD_BFIN_MODULE)
 109 static const unsigned int bf548_keymap[] = {
 110         KEYVAL(0, 0, KEY_ENTER),
 111         KEYVAL(0, 1, KEY_HELP),
 112         KEYVAL(0, 2, KEY_0),
 113         KEYVAL(0, 3, KEY_BACKSPACE),
 114         KEYVAL(1, 0, KEY_TAB),
 115         KEYVAL(1, 1, KEY_9),
 116         KEYVAL(1, 2, KEY_8),
 117         KEYVAL(1, 3, KEY_7),
 118         KEYVAL(2, 0, KEY_DOWN),
 119         KEYVAL(2, 1, KEY_6),
 120         KEYVAL(2, 2, KEY_5),
 121         KEYVAL(2, 3, KEY_4),
 122         KEYVAL(3, 0, KEY_UP),
 123         KEYVAL(3, 1, KEY_3),
 124         KEYVAL(3, 2, KEY_2),
 125         KEYVAL(3, 3, KEY_1),
 126 };
 127
 128 static struct bfin_kpad_platform_data bf54x_kpad_data = {
 129         .rows                   = 4,
 130         .cols                   = 4,
 131         .keymap                 = bf548_keymap,
 132         .keymapsize             = ARRAY_SIZE(bf548_keymap),
 133         .repeat                 = 0,
 134         .debounce_time          = 5000, /* ns (5ms) */
 135         .coldrive_time          = 1000, /* ns (1ms) */
 136         .keyup_test_interval    = 50, /* ms (50ms) */
 137 };
 138
 139 static struct resource bf54x_kpad_resources[] = {
 140         {
 141                 .start = IRQ_KEY,
 142                 .end = IRQ_KEY,
 143                 .flags = IORESOURCE_IRQ,
 144         },
 145 };
 146
 147 static struct platform_device bf54x_kpad_device = {
 148         .name           = "bf54x-keys",
 149         .id             = -1,
 150         .num_resources  = ARRAY_SIZE(bf54x_kpad_resources),
 151         .resource       = bf54x_kpad_resources,
 152         .dev            = {
 153                 .platform_data = &bf54x_kpad_data,
 154         },
 155 };
 156 #endif
 157
 158 #if defined(CONFIG_INPUT_BFIN_ROTARY) || defined(CONFIG_INPUT_BFIN_ROTARY_MODULE)
 159 #include <asm/bfin_rotary.h>
 160
 161 static struct bfin_rotary_platform_data bfin_rotary_data = {
 162         /*.rotary_up_key     = KEY_UP,*/
 163         /*.rotary_down_key   = KEY_DOWN,*/
 164         .rotary_rel_code   = REL_WHEEL,
 165         .rotary_button_key = KEY_ENTER,
 166         .debounce          = 10,        /* 0..17 */
 167         .mode              = ROT_QUAD_ENC | ROT_DEBE,
 168 };
 169
 170 static struct resource bfin_rotary_resources[] = {
 171         {
 172                 .start = IRQ_CNT,
 173                 .end = IRQ_CNT,
 174                 .flags = IORESOURCE_IRQ,
 175         },
 176 };
 177
 178 static struct platform_device bfin_rotary_device = {
 179         .name           = "bfin-rotary",
 180         .id             = -1,
 181         .num_resources  = ARRAY_SIZE(bfin_rotary_resources),
 182         .resource       = bfin_rotary_resources,
 183         .dev            = {
 184                 .platform_data = &bfin_rotary_data,
 185         },
 186 };
 187 #endif
 188
 189 #if defined(CONFIG_INPUT_ADXL34X) || defined(CONFIG_INPUT_ADXL34X_MODULE)
 190 #include <linux/input/adxl34x.h>
 191 static const struct adxl34x_platform_data adxl34x_info = {
 192         .x_axis_offset = 0,
 193         .y_axis_offset = 0,
 194         .z_axis_offset = 0,
 195         .tap_threshold = 0x31,
 196         .tap_duration = 0x10,
 197         .tap_latency = 0x60,
 198         .tap_window = 0xF0,
 199         .tap_axis_control = ADXL_TAP_X_EN | ADXL_TAP_Y_EN | ADXL_TAP_Z_EN,
 200         .act_axis_control = 0xFF,
 201         .activity_threshold = 5,
 202         .inactivity_threshold = 3,
 203         .inactivity_time = 4,
 204         .free_fall_threshold = 0x7,
 205         .free_fall_time = 0x20,
 206         .data_rate = 0x8,
 207         .data_range = ADXL_FULL_RES,
 208
 209         .ev_type = EV_ABS,
 210         .ev_code_x = ABS_X,             /* EV_REL */
 211         .ev_code_y = ABS_Y,             /* EV_REL */
 212         .ev_code_z = ABS_Z,             /* EV_REL */
 213
 214         .ev_code_tap = {BTN_TOUCH, BTN_TOUCH, BTN_TOUCH}, /* EV_KEY x,y,z */
 215
 216 /*      .ev_code_ff = KEY_F,*/          /* EV_KEY */
 217 /*      .ev_code_act_inactivity = KEY_A,*/      /* EV_KEY */
 218         .power_mode = ADXL_AUTO_SLEEP | ADXL_LINK,
 219         .fifo_mode = ADXL_FIFO_STREAM,
 220         .orientation_enable = ADXL_EN_ORIENTATION_3D,
 221         .deadzone_angle = ADXL_DEADZONE_ANGLE_10p8,
 222         .divisor_length = ADXL_LP_FILTER_DIVISOR_16,
 223         /* EV_KEY {+Z, +Y, +X, -X, -Y, -Z} */
 224         .ev_codes_orient_3d = {BTN_Z, BTN_Y, BTN_X, BTN_A, BTN_B, BTN_C},
 225 };
 226 #endif
 227
 228 #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
 229 static struct platform_device rtc_device = {
 230         .name = "rtc-bfin",
 231         .id   = -1,
 232 };
 233 #endif
 234
 235 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
 236 #ifdef CONFIG_SERIAL_BFIN_UART0
 237 static struct resource bfin_uart0_resources[] = {
 238         {
 239                 .start = UART0_DLL,
 240                 .end = UART0_RBR+2,
 241                 .flags = IORESOURCE_MEM,
 242         },
 243         {
 244                 .start = IRQ_UART0_RX,
 245                 .end = IRQ_UART0_RX+1,
 246                 .flags = IORESOURCE_IRQ,
 247         },
 248         {
 249                 .start = IRQ_UART0_ERROR,
 250                 .end = IRQ_UART0_ERROR,
 251                 .flags = IORESOURCE_IRQ,
 252         },
 253         {
 254                 .start = CH_UART0_TX,
 255                 .end = CH_UART0_TX,
 256                 .flags = IORESOURCE_DMA,
 257         },
 258         {
 259                 .start = CH_UART0_RX,
 260                 .end = CH_UART0_RX,
 261                 .flags = IORESOURCE_DMA,
 262         },
 263 };
 264
 265 static unsigned short bfin_uart0_peripherals[] = {
 266         P_UART0_TX, P_UART0_RX, 0
 267 };
 268
 269 static struct platform_device bfin_uart0_device = {
 270         .name = "bfin-uart",
 271         .id = 0,
 272         .num_resources = ARRAY_SIZE(bfin_uart0_resources),
 273         .resource = bfin_uart0_resources,
 274         .dev = {
 275                 .platform_data = &bfin_uart0_peripherals, /* Passed to driver */
 276         },
 277 };
 278 #endif
 279 #ifdef CONFIG_SERIAL_BFIN_UART1
 280 static struct resource bfin_uart1_resources[] = {
 281         {
 282                 .start = UART1_DLL,
 283                 .end = UART1_RBR+2,
 284                 .flags = IORESOURCE_MEM,
 285         },
 286         {
 287                 .start = IRQ_UART1_RX,
 288                 .end = IRQ_UART1_RX+1,
 289                 .flags = IORESOURCE_IRQ,
 290         },
 291         {
 292                 .start = IRQ_UART1_ERROR,
 293                 .end = IRQ_UART1_ERROR,
 294                 .flags = IORESOURCE_IRQ,
 295         },
 296         {
 297                 .start = CH_UART1_TX,
 298                 .end = CH_UART1_TX,
 299                 .flags = IORESOURCE_DMA,
 300         },
 301         {
 302                 .start = CH_UART1_RX,
 303                 .end = CH_UART1_RX,
 304                 .flags = IORESOURCE_DMA,
 305         },
 306 #ifdef CONFIG_BFIN_UART1_CTSRTS
 307         {       /* CTS pin -- 0 means not supported */
 308                 .start = GPIO_PE10,
 309                 .end = GPIO_PE10,
 310                 .flags = IORESOURCE_IO,
 311         },
 312         {       /* RTS pin -- 0 means not supported */
 313                 .start = GPIO_PE9,
 314                 .end = GPIO_PE9,
 315                 .flags = IORESOURCE_IO,
 316         },
 317 #endif
 318 };
 319
 320 static unsigned short bfin_uart1_peripherals[] = {
 321         P_UART1_TX, P_UART1_RX,
 322 #ifdef CONFIG_BFIN_UART1_CTSRTS
 323         P_UART1_RTS, P_UART1_CTS,
 324 #endif
 325         0
 326 };
 327
 328 static struct platform_device bfin_uart1_device = {
 329         .name = "bfin-uart",
 330         .id = 1,
 331         .num_resources = ARRAY_SIZE(bfin_uart1_resources),
 332         .resource = bfin_uart1_resources,
 333         .dev = {
 334                 .platform_data = &bfin_uart1_peripherals, /* Passed to driver */
 335         },
 336 };
 337 #endif
 338 #ifdef CONFIG_SERIAL_BFIN_UART2
 339 static struct resource bfin_uart2_resources[] = {
 340         {
 341                 .start = UART2_DLL,
 342                 .end = UART2_RBR+2,
 343                 .flags = IORESOURCE_MEM,
 344         },
 345         {
 346                 .start = IRQ_UART2_RX,
 347                 .end = IRQ_UART2_RX+1,
 348                 .flags = IORESOURCE_IRQ,
 349         },
 350         {
 351                 .start = IRQ_UART2_ERROR,
 352                 .end = IRQ_UART2_ERROR,
 353                 .flags = IORESOURCE_IRQ,
 354         },
 355         {
 356                 .start = CH_UART2_TX,
 357                 .end = CH_UART2_TX,
 358                 .flags = IORESOURCE_DMA,
 359         },
 360         {
 361                 .start = CH_UART2_RX,
 362                 .end = CH_UART2_RX,
 363                 .flags = IORESOURCE_DMA,
 364         },
 365 };
 366
 367 static unsigned short bfin_uart2_peripherals[] = {
 368         P_UART2_TX, P_UART2_RX, 0
 369 };
 370
 371 static struct platform_device bfin_uart2_device = {
 372         .name = "bfin-uart",
 373         .id = 2,
 374         .num_resources = ARRAY_SIZE(bfin_uart2_resources),
 375         .resource = bfin_uart2_resources,
 376         .dev = {
 377                 .platform_data = &bfin_uart2_peripherals, /* Passed to driver */
 378         },
 379 };
 380 #endif
 381 #ifdef CONFIG_SERIAL_BFIN_UART3
 382 static struct resource bfin_uart3_resources[] = {
 383         {
 384                 .start = UART3_DLL,
 385                 .end = UART3_RBR+2,
 386                 .flags = IORESOURCE_MEM,
 387         },
 388         {
 389                 .start = IRQ_UART3_RX,
 390                 .end = IRQ_UART3_RX+1,
 391                 .flags = IORESOURCE_IRQ,
 392         },
 393         {
 394                 .start = IRQ_UART3_ERROR,
 395                 .end = IRQ_UART3_ERROR,
 396                 .flags = IORESOURCE_IRQ,
 397         },
 398         {
 399                 .start = CH_UART3_TX,
 400                 .end = CH_UART3_TX,
 401                 .flags = IORESOURCE_DMA,
 402         },
 403         {
 404                 .start = CH_UART3_RX,
 405                 .end = CH_UART3_RX,
 406                 .flags = IORESOURCE_DMA,
 407         },
 408 #ifdef CONFIG_BFIN_UART3_CTSRTS
 409         {       /* CTS pin -- 0 means not supported */
 410                 .start = GPIO_PB3,
 411                 .end = GPIO_PB3,
 412                 .flags = IORESOURCE_IO,
 413         },
 414         {       /* RTS pin -- 0 means not supported */
 415                 .start = GPIO_PB2,
 416                 .end = GPIO_PB2,
 417                 .flags = IORESOURCE_IO,
 418         },
 419 #endif
 420 };
 421
 422 static unsigned short bfin_uart3_peripherals[] = {
 423         P_UART3_TX, P_UART3_RX,
 424 #ifdef CONFIG_BFIN_UART3_CTSRTS
 425         P_UART3_RTS, P_UART3_CTS,
 426 #endif
 427         0
 428 };
 429
 430 static struct platform_device bfin_uart3_device = {
 431         .name = "bfin-uart",
 432         .id = 3,
 433         .num_resources = ARRAY_SIZE(bfin_uart3_resources),
 434         .resource = bfin_uart3_resources,
 435         .dev = {
 436                 .platform_data = &bfin_uart3_peripherals, /* Passed to driver */
 437         },
 438 };
 439 #endif
 440 #endif
 441
 442 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
 443 #ifdef CONFIG_BFIN_SIR0
 444 static struct resource bfin_sir0_resources[] = {
 445         {
 446                 .start = 0xFFC00400,
 447                 .end = 0xFFC004FF,
 448                 .flags = IORESOURCE_MEM,
 449         },
 450         {
 451                 .start = IRQ_UART0_RX,
 452                 .end = IRQ_UART0_RX+1,
 453                 .flags = IORESOURCE_IRQ,
 454         },
 455         {
 456                 .start = CH_UART0_RX,
 457                 .end = CH_UART0_RX+1,
 458                 .flags = IORESOURCE_DMA,
 459         },
 460 };
 461 static struct platform_device bfin_sir0_device = {
 462         .name = "bfin_sir",
 463         .id = 0,
 464         .num_resources = ARRAY_SIZE(bfin_sir0_resources),
 465         .resource = bfin_sir0_resources,
 466 };
 467 #endif
 468 #ifdef CONFIG_BFIN_SIR1
 469 static struct resource bfin_sir1_resources[] = {
 470         {
 471                 .start = 0xFFC02000,
 472                 .end = 0xFFC020FF,
 473                 .flags = IORESOURCE_MEM,
 474         },
 475         {
 476                 .start = IRQ_UART1_RX,
 477                 .end = IRQ_UART1_RX+1,
 478                 .flags = IORESOURCE_IRQ,
 479         },
 480         {
 481                 .start = CH_UART1_RX,
 482                 .end = CH_UART1_RX+1,
 483                 .flags = IORESOURCE_DMA,
 484         },
 485 };
 486 static struct platform_device bfin_sir1_device = {
 487         .name = "bfin_sir",
 488         .id = 1,
 489         .num_resources = ARRAY_SIZE(bfin_sir1_resources),
 490         .resource = bfin_sir1_resources,
 491 };
 492 #endif
 493 #ifdef CONFIG_BFIN_SIR2
 494 static struct resource bfin_sir2_resources[] = {
 495         {
 496                 .start = 0xFFC02100,
 497                 .end = 0xFFC021FF,
 498                 .flags = IORESOURCE_MEM,
 499         },
 500         {
 501                 .start = IRQ_UART2_RX,
 502                 .end = IRQ_UART2_RX+1,
 503                 .flags = IORESOURCE_IRQ,
 504         },
 505         {
 506                 .start = CH_UART2_RX,
 507                 .end = CH_UART2_RX+1,
 508                 .flags = IORESOURCE_DMA,
 509         },
 510 };
 511 static struct platform_device bfin_sir2_device = {
 512         .name = "bfin_sir",
 513         .id = 2,
 514         .num_resources = ARRAY_SIZE(bfin_sir2_resources),
 515         .resource = bfin_sir2_resources,
 516 };
 517 #endif
 518 #ifdef CONFIG_BFIN_SIR3
 519 static struct resource bfin_sir3_resources[] = {
 520         {
 521                 .start = 0xFFC03100,
 522                 .end = 0xFFC031FF,
 523                 .flags = IORESOURCE_MEM,
 524         },
 525         {
 526                 .start = IRQ_UART3_RX,
 527                 .end = IRQ_UART3_RX+1,
 528                 .flags = IORESOURCE_IRQ,
 529         },
 530         {
 531                 .start = CH_UART3_RX,
 532                 .end = CH_UART3_RX+1,
 533                 .flags = IORESOURCE_DMA,
 534         },
 535 };
 536 static struct platform_device bfin_sir3_device = {
 537         .name = "bfin_sir",
 538         .id = 3,
 539         .num_resources = ARRAY_SIZE(bfin_sir3_resources),
 540         .resource = bfin_sir3_resources,
 541 };
 542 #endif
 543 #endif
 544
 545 #if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
 546 #include <linux/smsc911x.h>
 547
 548 static struct resource smsc911x_resources[] = {
 549         {
 550                 .name = "smsc911x-memory",
 551                 .start = 0x24000000,
 552                 .end = 0x24000000 + 0xFF,
 553                 .flags = IORESOURCE_MEM,
 554         },
 555         {
 556                 .start = IRQ_PE8,
 557                 .end = IRQ_PE8,
 558                 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
 559         },
 560 };
 561
 562 static struct smsc911x_platform_config smsc911x_config = {
 563         .flags = SMSC911X_USE_32BIT,
 564         .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
 565         .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
 566         .phy_interface = PHY_INTERFACE_MODE_MII,
 567 };
 568
 569 static struct platform_device smsc911x_device = {
 570         .name = "smsc911x",
 571         .id = 0,
 572         .num_resources = ARRAY_SIZE(smsc911x_resources),
 573         .resource = smsc911x_resources,
 574         .dev = {
 575                 .platform_data = &smsc911x_config,
 576         },
 577 };
 578 #endif
 579
 580 #if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
 581 static struct resource musb_resources[] = {
 582         [0] = {
 583                 .start  = 0xFFC03C00,
 584                 .end    = 0xFFC040FF,
 585                 .flags  = IORESOURCE_MEM,
 586         },
 587         [1] = { /* general IRQ */
 588                 .start  = IRQ_USB_INT0,
 589                 .end    = IRQ_USB_INT0,
 590                 .flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
 591                 .name   = "mc"
 592         },
 593         [2] = { /* DMA IRQ */
 594                 .start  = IRQ_USB_DMA,
 595                 .end    = IRQ_USB_DMA,
 596                 .flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
 597                 .name   = "dma"
 598         },
 599 };
 600
 601 static struct musb_hdrc_config musb_config = {
 602         .multipoint     = 0,
 603         .dyn_fifo       = 0,
 604         .soft_con       = 1,
 605         .dma            = 1,
 606         .num_eps        = 8,
 607         .dma_channels   = 8,
 608         .gpio_vrsel     = GPIO_PE7,
 609         /* Some custom boards need to be active low, just set it to "0"
 610          * if it is the case.
 611          */
 612         .gpio_vrsel_active      = 1,
 613         .clkin          = 24,           /* musb CLKIN in MHZ */
 614 };
 615
 616 static struct musb_hdrc_platform_data musb_plat = {
 617 #if defined(CONFIG_USB_MUSB_OTG)
 618         .mode           = MUSB_OTG,
 619 #elif defined(CONFIG_USB_MUSB_HDRC_HCD)
 620         .mode           = MUSB_HOST,
 621 #elif defined(CONFIG_USB_GADGET_MUSB_HDRC)
 622         .mode           = MUSB_PERIPHERAL,
 623 #endif
 624         .config         = &musb_config,
 625 };
 626
 627 static u64 musb_dmamask = ~(u32)0;
 628
 629 static struct platform_device musb_device = {
 630         .name           = "musb-blackfin",
 631         .id             = 0,
 632         .dev = {
 633                 .dma_mask               = &musb_dmamask,
 634                 .coherent_dma_mask      = 0xffffffff,
 635                 .platform_data          = &musb_plat,
 636         },
 637         .num_resources  = ARRAY_SIZE(musb_resources),
 638         .resource       = musb_resources,
 639 };
 640 #endif
 641
 642 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
 643 #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
 644 static struct resource bfin_sport0_uart_resources[] = {
 645         {
 646                 .start = SPORT0_TCR1,
 647                 .end = SPORT0_MRCS3+4,
 648                 .flags = IORESOURCE_MEM,
 649         },
 650         {
 651                 .start = IRQ_SPORT0_RX,
 652                 .end = IRQ_SPORT0_RX+1,
 653                 .flags = IORESOURCE_IRQ,
 654         },
 655         {
 656                 .start = IRQ_SPORT0_ERROR,
 657                 .end = IRQ_SPORT0_ERROR,
 658                 .flags = IORESOURCE_IRQ,
 659         },
 660 };
 661
 662 static unsigned short bfin_sport0_peripherals[] = {
 663         P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
 664         P_SPORT0_DRPRI, P_SPORT0_RSCLK, 0
 665 };
 666
 667 static struct platform_device bfin_sport0_uart_device = {
 668         .name = "bfin-sport-uart",
 669         .id = 0,
 670         .num_resources = ARRAY_SIZE(bfin_sport0_uart_resources),
 671         .resource = bfin_sport0_uart_resources,
 672         .dev = {
 673                 .platform_data = &bfin_sport0_peripherals, /* Passed to driver */
 674         },
 675 };
 676 #endif
 677 #ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
 678 static struct resource bfin_sport1_uart_resources[] = {
 679         {
 680                 .start = SPORT1_TCR1,
 681                 .end = SPORT1_MRCS3+4,
 682                 .flags = IORESOURCE_MEM,
 683         },
 684         {
 685                 .start = IRQ_SPORT1_RX,
 686                 .end = IRQ_SPORT1_RX+1,
 687                 .flags = IORESOURCE_IRQ,
 688         },
 689         {
 690                 .start = IRQ_SPORT1_ERROR,
 691                 .end = IRQ_SPORT1_ERROR,
 692                 .flags = IORESOURCE_IRQ,
 693         },
 694 };
 695
 696 static unsigned short bfin_sport1_peripherals[] = {
 697         P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
 698         P_SPORT1_DRPRI, P_SPORT1_RSCLK, 0
 699 };
 700
 701 static struct platform_device bfin_sport1_uart_device = {
 702         .name = "bfin-sport-uart",
 703         .id = 1,
 704         .num_resources = ARRAY_SIZE(bfin_sport1_uart_resources),
 705         .resource = bfin_sport1_uart_resources,
 706         .dev = {
 707                 .platform_data = &bfin_sport1_peripherals, /* Passed to driver */
 708         },
 709 };
 710 #endif
 711 #ifdef CONFIG_SERIAL_BFIN_SPORT2_UART
 712 static struct resource bfin_sport2_uart_resources[] = {
 713         {
 714                 .start = SPORT2_TCR1,
 715                 .end = SPORT2_MRCS3+4,
 716                 .flags = IORESOURCE_MEM,
 717         },
 718         {
 719                 .start = IRQ_SPORT2_RX,
 720                 .end = IRQ_SPORT2_RX+1,
 721                 .flags = IORESOURCE_IRQ,
 722         },
 723         {
 724                 .start = IRQ_SPORT2_ERROR,
 725                 .end = IRQ_SPORT2_ERROR,
 726                 .flags = IORESOURCE_IRQ,
 727         },
 728 };
 729
 730 static unsigned short bfin_sport2_peripherals[] = {
 731         P_SPORT2_TFS, P_SPORT2_DTPRI, P_SPORT2_TSCLK, P_SPORT2_RFS,
 732         P_SPORT2_DRPRI, P_SPORT2_RSCLK, P_SPORT2_DRSEC, P_SPORT2_DTSEC, 0
 733 };
 734
 735 static struct platform_device bfin_sport2_uart_device = {
 736         .name = "bfin-sport-uart",
 737         .id = 2,
 738         .num_resources = ARRAY_SIZE(bfin_sport2_uart_resources),
 739         .resource = bfin_sport2_uart_resources,
 740         .dev = {
 741                 .platform_data = &bfin_sport2_peripherals, /* Passed to driver */
 742         },
 743 };
 744 #endif
 745 #ifdef CONFIG_SERIAL_BFIN_SPORT3_UART
 746 static struct resource bfin_sport3_uart_resources[] = {
 747         {
 748                 .start = SPORT3_TCR1,
 749                 .end = SPORT3_MRCS3+4,
 750                 .flags = IORESOURCE_MEM,
 751         },
 752         {
 753                 .start = IRQ_SPORT3_RX,
 754                 .end = IRQ_SPORT3_RX+1,
 755                 .flags = IORESOURCE_IRQ,
 756         },
 757         {
 758                 .start = IRQ_SPORT3_ERROR,
 759                 .end = IRQ_SPORT3_ERROR,
 760                 .flags = IORESOURCE_IRQ,
 761         },
 762 };
 763
 764 static unsigned short bfin_sport3_peripherals[] = {
 765         P_SPORT3_TFS, P_SPORT3_DTPRI, P_SPORT3_TSCLK, P_SPORT3_RFS,
 766         P_SPORT3_DRPRI, P_SPORT3_RSCLK, P_SPORT3_DRSEC, P_SPORT3_DTSEC, 0
 767 };
 768
 769 static struct platform_device bfin_sport3_uart_device = {
 770         .name = "bfin-sport-uart",
 771         .id = 3,
 772         .num_resources = ARRAY_SIZE(bfin_sport3_uart_resources),
 773         .resource = bfin_sport3_uart_resources,
 774         .dev = {
 775                 .platform_data = &bfin_sport3_peripherals, /* Passed to driver */
 776         },
 777 };
 778 #endif
 779 #endif
 780
 781 #if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE)
 782
 783 static unsigned short bfin_can0_peripherals[] = {
 784         P_CAN0_RX, P_CAN0_TX, 0
 785 };
 786
 787 static struct resource bfin_can0_resources[] = {
 788         {
 789                 .start = 0xFFC02A00,
 790                 .end = 0xFFC02FFF,
 791                 .flags = IORESOURCE_MEM,
 792         },
 793         {
 794                 .start = IRQ_CAN0_RX,
 795                 .end = IRQ_CAN0_RX,
 796                 .flags = IORESOURCE_IRQ,
 797         },
 798         {
 799                 .start = IRQ_CAN0_TX,
 800                 .end = IRQ_CAN0_TX,
 801                 .flags = IORESOURCE_IRQ,
 802         },
 803         {
 804                 .start = IRQ_CAN0_ERROR,
 805                 .end = IRQ_CAN0_ERROR,
 806                 .flags = IORESOURCE_IRQ,
 807         },
 808 };
 809
 810 static struct platform_device bfin_can0_device = {
 811         .name = "bfin_can",
 812         .id = 0,
 813         .num_resources = ARRAY_SIZE(bfin_can0_resources),
 814         .resource = bfin_can0_resources,
 815         .dev = {
 816                 .platform_data = &bfin_can0_peripherals, /* Passed to driver */
 817         },
 818 };
 819
 820 static unsigned short bfin_can1_peripherals[] = {
 821         P_CAN1_RX, P_CAN1_TX, 0
 822 };
 823
 824 static struct resource bfin_can1_resources[] = {
 825         {
 826                 .start = 0xFFC03200,
 827                 .end = 0xFFC037FF,
 828                 .flags = IORESOURCE_MEM,
 829         },
 830         {
 831                 .start = IRQ_CAN1_RX,
 832                 .end = IRQ_CAN1_RX,
 833                 .flags = IORESOURCE_IRQ,
 834         },
 835         {
 836                 .start = IRQ_CAN1_TX,
 837                 .end = IRQ_CAN1_TX,
 838                 .flags = IORESOURCE_IRQ,
 839         },
 840         {
 841                 .start = IRQ_CAN1_ERROR,
 842                 .end = IRQ_CAN1_ERROR,
 843                 .flags = IORESOURCE_IRQ,
 844         },
 845 };
 846
 847 static struct platform_device bfin_can1_device = {
 848         .name = "bfin_can",
 849         .id = 1,
 850         .num_resources = ARRAY_SIZE(bfin_can1_resources),
 851         .resource = bfin_can1_resources,
 852         .dev = {
 853                 .platform_data = &bfin_can1_peripherals, /* Passed to driver */
 854         },
 855 };
 856
 857 #endif
 858
 859 #if defined(CONFIG_PATA_BF54X) || defined(CONFIG_PATA_BF54X_MODULE)
 860 static struct resource bfin_atapi_resources[] = {
 861         {
 862                 .start = 0xFFC03800,
 863                 .end = 0xFFC0386F,
 864                 .flags = IORESOURCE_MEM,
 865         },
 866         {
 867                 .start = IRQ_ATAPI_ERR,
 868                 .end = IRQ_ATAPI_ERR,
 869                 .flags = IORESOURCE_IRQ,
 870         },
 871 };
 872
 873 static struct platform_device bfin_atapi_device = {
 874         .name = "pata-bf54x",
 875         .id = -1,
 876         .num_resources = ARRAY_SIZE(bfin_atapi_resources),
 877         .resource = bfin_atapi_resources,
 878 };
 879 #endif
 880
 881 #if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
 882 static struct mtd_partition partition_info[] = {
 883         {
 884                 .name = "bootloader(nand)",
 885                 .offset = 0,
 886                 .size = 0x80000,
 887         }, {
 888                 .name = "linux kernel(nand)",
 889                 .offset = MTDPART_OFS_APPEND,
 890                 .size = 4 * 1024 * 1024,
 891         },
 892         {
 893                 .name = "file system(nand)",
 894                 .offset = MTDPART_OFS_APPEND,
 895                 .size = MTDPART_SIZ_FULL,
 896         },
 897 };
 898
 899 static struct bf5xx_nand_platform bf5xx_nand_platform = {
 900         .data_width = NFC_NWIDTH_8,
 901         .partitions = partition_info,
 902         .nr_partitions = ARRAY_SIZE(partition_info),
 903         .rd_dly = 3,
 904         .wr_dly = 3,
 905 };
 906
 907 static struct resource bf5xx_nand_resources[] = {
 908         {
 909                 .start = 0xFFC03B00,
 910                 .end = 0xFFC03B4F,
 911                 .flags = IORESOURCE_MEM,
 912         },
 913         {
 914                 .start = CH_NFC,
 915                 .end = CH_NFC,
 916                 .flags = IORESOURCE_IRQ,
 917         },
 918 };
 919
 920 static struct platform_device bf5xx_nand_device = {
 921         .name = "bf5xx-nand",
 922         .id = 0,
 923         .num_resources = ARRAY_SIZE(bf5xx_nand_resources),
 924         .resource = bf5xx_nand_resources,
 925         .dev = {
 926                 .platform_data = &bf5xx_nand_platform,
 927         },
 928 };
 929 #endif
 930
 931 #if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE)
 932
 933 static struct bfin_sd_host bfin_sdh_data = {
 934         .dma_chan = CH_SDH,
 935         .irq_int0 = IRQ_SDH_MASK0,
 936         .pin_req = {P_SD_D0, P_SD_D1, P_SD_D2, P_SD_D3, P_SD_CLK, P_SD_CMD, 0},
 937 };
 938
 939 static struct platform_device bf54x_sdh_device = {
 940         .name = "bfin-sdh",
 941         .id = 0,
 942         .dev = {
 943                 .platform_data = &bfin_sdh_data,
 944         },
 945 };
 946 #endif
 947
 948 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
 949 static struct mtd_partition ezkit_partitions[] = {
 950         {
 951                 .name       = "bootloader(nor)",
 952                 .size       = 0x80000,
 953                 .offset     = 0,
 954         }, {
 955                 .name       = "linux kernel(nor)",
 956                 .size       = 0x400000,
 957                 .offset     = MTDPART_OFS_APPEND,
 958         }, {
 959                 .name       = "file system(nor)",
 960                 .size       = 0x1000000 - 0x80000 - 0x400000 - 0x8000 * 4,
 961                 .offset     = MTDPART_OFS_APPEND,
 962         }, {
 963                 .name       = "config(nor)",
 964                 .size       = 0x8000 * 3,
 965                 .offset     = MTDPART_OFS_APPEND,
 966         }, {
 967                 .name       = "u-boot env(nor)",
 968                 .size       = 0x8000,
 969                 .offset     = MTDPART_OFS_APPEND,
 970         }
 971 };
 972
 973 static struct physmap_flash_data ezkit_flash_data = {
 974         .width      = 2,
 975         .parts      = ezkit_partitions,
 976         .nr_parts   = ARRAY_SIZE(ezkit_partitions),
 977 };
 978
 979 static struct resource ezkit_flash_resource = {
 980         .start = 0x20000000,
 981         .end   = 0x21ffffff,
 982         .flags = IORESOURCE_MEM,
 983 };
 984
 985 static struct platform_device ezkit_flash_device = {
 986         .name          = "physmap-flash",
 987         .id            = 0,
 988         .dev = {
 989                 .platform_data = &ezkit_flash_data,
 990         },
 991         .num_resources = 1,
 992         .resource      = &ezkit_flash_resource,
 993 };
 994 #endif
 995
 996 #if defined(CONFIG_MTD_M25P80) \
 997         || defined(CONFIG_MTD_M25P80_MODULE)
 998 /* SPI flash chip (m25p16) */
 999 static struct mtd_partition bfin_spi_flash_partitions[] = {
1000         {
1001                 .name = "bootloader(spi)",
1002                 .size = 0x00080000,
1003                 .offset = 0,
1004                 .mask_flags = MTD_CAP_ROM
1005         }, {
1006                 .name = "linux kernel(spi)",
1007                 .size = MTDPART_SIZ_FULL,
1008                 .offset = MTDPART_OFS_APPEND,
1009         }
1010 };
1011
1012 static struct flash_platform_data bfin_spi_flash_data = {
1013         .name = "m25p80",
1014         .parts = bfin_spi_flash_partitions,
1015         .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
1016         .type = "m25p16",
1017 };
1018
1019 static struct bfin5xx_spi_chip spi_flash_chip_info = {
1020         .enable_dma = 0,         /* use dma transfer with this chip*/
1021         .bits_per_word = 8,
1022 };
1023 #endif
1024
1025 #if defined(CONFIG_SND_BF5XX_SOC_AD183X) \
1026         || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE)
1027 static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
1028         .enable_dma = 0,
1029         .bits_per_word = 16,
1030 };
1031 #endif
1032
1033 #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
1034 static struct bfin5xx_spi_chip spi_ad7877_chip_info = {
1035         .enable_dma = 0,
1036         .bits_per_word = 16,
1037 };
1038
1039 static const struct ad7877_platform_data bfin_ad7877_ts_info = {
1040         .model                  = 7877,
1041         .vref_delay_usecs       = 50,   /* internal, no capacitor */
1042         .x_plate_ohms           = 419,
1043         .y_plate_ohms           = 486,
1044         .pressure_max           = 1000,
1045         .pressure_min           = 0,
1046         .stopacq_polarity       = 1,
1047         .first_conversion_delay = 3,
1048         .acquisition_time       = 1,
1049         .averaging              = 1,
1050         .pen_down_acc_interval  = 1,
1051 };
1052 #endif
1053
1054 #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
1055 static struct bfin5xx_spi_chip spidev_chip_info = {
1056         .enable_dma = 0,
1057         .bits_per_word = 8,
1058 };
1059 #endif
1060
1061 #if defined(CONFIG_INPUT_ADXL34X_SPI) || defined(CONFIG_INPUT_ADXL34X_SPI_MODULE)
1062 static struct bfin5xx_spi_chip spi_adxl34x_chip_info = {
1063         .enable_dma = 0,         /* use dma transfer with this chip*/
1064         .bits_per_word = 8,
1065 };
1066 #endif
1067
1068 static struct spi_board_info bfin_spi_board_info[] __initdata = {
1069 #if defined(CONFIG_MTD_M25P80) \
1070         || defined(CONFIG_MTD_M25P80_MODULE)
1071         {
1072                 /* the modalias must be the same as spi device driver name */
1073                 .modalias = "m25p80", /* Name of spi_driver for this device */
1074                 .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
1075                 .bus_num = 0, /* Framework bus number */
1076                 .chip_select = 1, /* SPI_SSEL1*/
1077                 .platform_data = &bfin_spi_flash_data,
1078                 .controller_data = &spi_flash_chip_info,
1079                 .mode = SPI_MODE_3,
1080         },
1081 #endif
1082 #if defined(CONFIG_SND_BF5XX_SOC_AD183X) \
1083         || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE)
1084         {
1085                 .modalias = "ad183x",
1086                 .max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
1087                 .bus_num = 1,
1088                 .chip_select = 4,
1089                 .controller_data = &ad1836_spi_chip_info,
1090         },
1091 #endif
1092 #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
1093         {
1094                 .modalias               = "ad7877",
1095                 .platform_data          = &bfin_ad7877_ts_info,
1096                 .irq                    = IRQ_PB4,      /* old boards (<=Rev 1.3) use IRQ_PJ11 */
1097                 .max_speed_hz           = 12500000,     /* max spi clock (SCK) speed in HZ */
1098                 .bus_num                = 0,
1099                 .chip_select            = 2,
1100                 .controller_data = &spi_ad7877_chip_info,
1101         },
1102 #endif
1103 #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
1104         {
1105                 .modalias = "spidev",
1106                 .max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
1107                 .bus_num = 0,
1108                 .chip_select = 1,
1109                 .controller_data = &spidev_chip_info,
1110         },
1111 #endif
1112 #if defined(CONFIG_INPUT_ADXL34X_SPI) || defined(CONFIG_INPUT_ADXL34X_SPI_MODULE)
1113         {
1114                 .modalias               = "adxl34x",
1115                 .platform_data          = &adxl34x_info,
1116                 .irq                    = IRQ_PC5,
1117                 .max_speed_hz           = 5000000,     /* max spi clock (SCK) speed in HZ */
1118                 .bus_num                = 1,
1119                 .chip_select            = 2,
1120                 .controller_data = &spi_adxl34x_chip_info,
1121                 .mode = SPI_MODE_3,
1122         },
1123 #endif
1124 };
1125 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
1126 /* SPI (0) */
1127 static struct resource bfin_spi0_resource[] = {
1128         [0] = {
1129                 .start = SPI0_REGBASE,
1130                 .end   = SPI0_REGBASE + 0xFF,
1131                 .flags = IORESOURCE_MEM,
1132         },
1133         [1] = {
1134                 .start = CH_SPI0,
1135                 .end   = CH_SPI0,
1136                 .flags = IORESOURCE_DMA,
1137         },
1138         [2] = {
1139                 .start = IRQ_SPI0,
1140                 .end   = IRQ_SPI0,
1141                 .flags = IORESOURCE_IRQ,
1142         }
1143 };
1144
1145 /* SPI (1) */
1146 static struct resource bfin_spi1_resource[] = {
1147         [0] = {
1148                 .start = SPI1_REGBASE,
1149                 .end   = SPI1_REGBASE + 0xFF,
1150                 .flags = IORESOURCE_MEM,
1151         },
1152         [1] = {
1153                 .start = CH_SPI1,
1154                 .end   = CH_SPI1,
1155                 .flags = IORESOURCE_DMA,
1156         },
1157         [2] = {
1158                 .start = IRQ_SPI1,
1159                 .end   = IRQ_SPI1,
1160                 .flags = IORESOURCE_IRQ,
1161         }
1162 };
1163
1164 /* SPI controller data */
1165 static struct bfin5xx_spi_master bf54x_spi_master_info0 = {
1166         .num_chipselect = 4,
1167         .enable_dma = 1,  /* master has the ability to do dma transfer */
1168         .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
1169 };
1170
1171 static struct platform_device bf54x_spi_master0 = {
1172         .name = "bfin-spi",
1173         .id = 0, /* Bus number */
1174         .num_resources = ARRAY_SIZE(bfin_spi0_resource),
1175         .resource = bfin_spi0_resource,
1176         .dev = {
1177                 .platform_data = &bf54x_spi_master_info0, /* Passed to driver */
1178                 },
1179 };
1180
1181 static struct bfin5xx_spi_master bf54x_spi_master_info1 = {
1182         .num_chipselect = 4,
1183         .enable_dma = 1,  /* master has the ability to do dma transfer */
1184         .pin_req = {P_SPI1_SCK, P_SPI1_MISO, P_SPI1_MOSI, 0},
1185 };
1186
1187 static struct platform_device bf54x_spi_master1 = {
1188         .name = "bfin-spi",
1189         .id = 1, /* Bus number */
1190         .num_resources = ARRAY_SIZE(bfin_spi1_resource),
1191         .resource = bfin_spi1_resource,
1192         .dev = {
1193                 .platform_data = &bf54x_spi_master_info1, /* Passed to driver */
1194                 },
1195 };
1196 #endif  /* spi master and devices */
1197
1198 #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
1199 static struct resource bfin_twi0_resource[] = {
1200         [0] = {
1201                 .start = TWI0_REGBASE,
1202                 .end   = TWI0_REGBASE + 0xFF,
1203                 .flags = IORESOURCE_MEM,
1204         },
1205         [1] = {
1206                 .start = IRQ_TWI0,
1207                 .end   = IRQ_TWI0,
1208                 .flags = IORESOURCE_IRQ,
1209         },
1210 };
1211
1212 static struct platform_device i2c_bfin_twi0_device = {
1213         .name = "i2c-bfin-twi",
1214         .id = 0,
1215         .num_resources = ARRAY_SIZE(bfin_twi0_resource),
1216         .resource = bfin_twi0_resource,
1217 };
1218
1219 #if !defined(CONFIG_BF542)      /* The BF542 only has 1 TWI */
1220 static struct resource bfin_twi1_resource[] = {
1221         [0] = {
1222                 .start = TWI1_REGBASE,
1223                 .end   = TWI1_REGBASE + 0xFF,
1224                 .flags = IORESOURCE_MEM,
1225         },
1226         [1] = {
1227                 .start = IRQ_TWI1,
1228                 .end   = IRQ_TWI1,
1229                 .flags = IORESOURCE_IRQ,
1230         },
1231 };
1232
1233 static struct platform_device i2c_bfin_twi1_device = {
1234         .name = "i2c-bfin-twi",
1235         .id = 1,
1236         .num_resources = ARRAY_SIZE(bfin_twi1_resource),
1237         .resource = bfin_twi1_resource,
1238 };
1239 #endif
1240 #endif
1241
1242 static struct i2c_board_info __initdata bfin_i2c_board_info0[] = {
1243 };
1244
1245 #if !defined(CONFIG_BF542)      /* The BF542 only has 1 TWI */
1246 static struct i2c_board_info __initdata bfin_i2c_board_info1[] = {
1247 #if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
1248         {
1249                 I2C_BOARD_INFO("pcf8574_lcd", 0x22),
1250         },
1251 #endif
1252 #if defined(CONFIG_INPUT_PCF8574) || defined(CONFIG_INPUT_PCF8574_MODULE)
1253         {
1254                 I2C_BOARD_INFO("pcf8574_keypad", 0x27),
1255                 .irq = 212,
1256         },
1257 #endif
1258 #if defined(CONFIG_INPUT_ADXL34X_I2C) || defined(CONFIG_INPUT_ADXL34X_I2C_MODULE)
1259         {
1260                 I2C_BOARD_INFO("adxl34x", 0x53),
1261                 .irq = IRQ_PC5,
1262                 .platform_data = (void *)&adxl34x_info,
1263         },
1264 #endif
1265 #if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
1266         {
1267                 I2C_BOARD_INFO("ad5252", 0x2f),
1268         },
1269 #endif
1270 };
1271 #endif
1272
1273 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
1274 #include <linux/gpio_keys.h>
1275
1276 static struct gpio_keys_button bfin_gpio_keys_table[] = {
1277         {BTN_0, GPIO_PB8, 1, "gpio-keys: BTN0"},
1278         {BTN_1, GPIO_PB9, 1, "gpio-keys: BTN1"},
1279         {BTN_2, GPIO_PB10, 1, "gpio-keys: BTN2"},
1280         {BTN_3, GPIO_PB11, 1, "gpio-keys: BTN3"},
1281 };
1282
1283 static struct gpio_keys_platform_data bfin_gpio_keys_data = {
1284         .buttons        = bfin_gpio_keys_table,
1285         .nbuttons       = ARRAY_SIZE(bfin_gpio_keys_table),
1286 };
1287
1288 static struct platform_device bfin_device_gpiokeys = {
1289         .name      = "gpio-keys",
1290         .dev = {
1291                 .platform_data = &bfin_gpio_keys_data,
1292         },
1293 };
1294 #endif
1295
1296 static const unsigned int cclk_vlev_datasheet[] =
1297 {
1298 /*
1299  * Internal VLEV BF54XSBBC1533
1300  ****temporarily using these values until data sheet is updated
1301  */
1302         VRPAIR(VLEV_085, 150000000),
1303         VRPAIR(VLEV_090, 250000000),
1304         VRPAIR(VLEV_110, 276000000),
1305         VRPAIR(VLEV_115, 301000000),
1306         VRPAIR(VLEV_120, 525000000),
1307         VRPAIR(VLEV_125, 550000000),
1308         VRPAIR(VLEV_130, 600000000),
1309 };
1310
1311 static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
1312         .tuple_tab = cclk_vlev_datasheet,
1313         .tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
1314         .vr_settling_time = 25 /* us */,
1315 };
1316
1317 static struct platform_device bfin_dpmc = {
1318         .name = "bfin dpmc",
1319         .dev = {
1320                 .platform_data = &bfin_dmpc_vreg_data,
1321         },
1322 };
1323
1324 #if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) || \
1325         defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE) || \
1326         defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE)
1327
1328 #define SPORT_REQ(x) \
1329         [x] = {P_SPORT##x##_TFS, P_SPORT##x##_DTPRI, P_SPORT##x##_TSCLK, \
1330                 P_SPORT##x##_RFS, P_SPORT##x##_DRPRI, P_SPORT##x##_RSCLK, 0}
1331
1332 static const u16 bfin_snd_pin[][7] = {
1333         SPORT_REQ(0),
1334         SPORT_REQ(1),
1335 };
1336
1337 static struct bfin_snd_platform_data bfin_snd_data[] = {
1338         {
1339                 .pin_req = &bfin_snd_pin[0][0],
1340         },
1341         {
1342                 .pin_req = &bfin_snd_pin[1][0],
1343         },
1344 };
1345
1346 #define BFIN_SND_RES(x) \
1347         [x] = { \
1348                 { \
1349                         .start = SPORT##x##_TCR1, \
1350                         .end = SPORT##x##_TCR1, \
1351                         .flags = IORESOURCE_MEM \
1352                 }, \
1353                 { \
1354                         .start = CH_SPORT##x##_RX, \
1355                         .end = CH_SPORT##x##_RX, \
1356                         .flags = IORESOURCE_DMA, \
1357                 }, \
1358                 { \
1359                         .start = CH_SPORT##x##_TX, \
1360                         .end = CH_SPORT##x##_TX, \
1361                         .flags = IORESOURCE_DMA, \
1362                 }, \
1363                 { \
1364                         .start = IRQ_SPORT##x##_ERROR, \
1365                         .end = IRQ_SPORT##x##_ERROR, \
1366                         .flags = IORESOURCE_IRQ, \
1367                 } \
1368         }
1369
1370 static struct resource bfin_snd_resources[][4] = {
1371         BFIN_SND_RES(0),
1372         BFIN_SND_RES(1),
1373 };
1374
1375 static struct platform_device bfin_pcm = {
1376         .name = "bfin-pcm-audio",
1377         .id = -1,
1378 };
1379 #endif
1380
1381 #if defined(CONFIG_SND_BF5XX_SOC_AD73311) || defined(CONFIG_SND_BF5XX_SOC_AD73311_MODULE)
1382 static struct platform_device bfin_ad73311_codec_device = {
1383         .name = "ad73311",
1384         .id = -1,
1385 };
1386 #endif
1387
1388 #if defined(CONFIG_SND_BF5XX_SOC_AD1980) || defined(CONFIG_SND_BF5XX_SOC_AD1980_MODULE)
1389 static struct platform_device bfin_ad1980_codec_device = {
1390         .name = "ad1980",
1391         .id = -1,
1392 };
1393 #endif
1394
1395 #if defined(CONFIG_SND_BF5XX_SOC_I2S) || defined(CONFIG_SND_BF5XX_SOC_I2S_MODULE)
1396 static struct platform_device bfin_i2s = {
1397         .name = "bfin-i2s",
1398         .id = CONFIG_SND_BF5XX_SPORT_NUM,
1399         .num_resources = ARRAY_SIZE(bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM]),
1400         .resource = bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM],
1401         .dev = {
1402                 .platform_data = &bfin_snd_data[CONFIG_SND_BF5XX_SPORT_NUM],
1403         },
1404 };
1405 #endif
1406
1407 #if defined(CONFIG_SND_BF5XX_SOC_TDM) || defined(CONFIG_SND_BF5XX_SOC_TDM_MODULE)
1408 static struct platform_device bfin_tdm = {
1409         .name = "bfin-tdm",
1410         .id = CONFIG_SND_BF5XX_SPORT_NUM,
1411         .num_resources = ARRAY_SIZE(bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM]),
1412         .resource = bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM],
1413         .dev = {
1414                 .platform_data = &bfin_snd_data[CONFIG_SND_BF5XX_SPORT_NUM],
1415         },
1416 };
1417 #endif
1418
1419 #if defined(CONFIG_SND_BF5XX_SOC_AC97) || defined(CONFIG_SND_BF5XX_SOC_AC97_MODULE)
1420 static struct platform_device bfin_ac97 = {
1421         .name = "bfin-ac97",
1422         .id = CONFIG_SND_BF5XX_SPORT_NUM,
1423         .num_resources = ARRAY_SIZE(bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM]),
1424         .resource = bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM],
1425         .dev = {
1426                 .platform_data = &bfin_snd_data[CONFIG_SND_BF5XX_SPORT_NUM],
1427         },
1428 };
1429 #endif
1430
1431 static struct platform_device *ezkit_devices[] __initdata = {
1432
1433         &bfin_dpmc,
1434
1435 #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
1436         &rtc_device,
1437 #endif
1438
1439 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
1440 #ifdef CONFIG_SERIAL_BFIN_UART0
1441         &bfin_uart0_device,
1442 #endif
1443 #ifdef CONFIG_SERIAL_BFIN_UART1
1444         &bfin_uart1_device,
1445 #endif
1446 #ifdef CONFIG_SERIAL_BFIN_UART2
1447         &bfin_uart2_device,
1448 #endif
1449 #ifdef CONFIG_SERIAL_BFIN_UART3
1450         &bfin_uart3_device,
1451 #endif
1452 #endif
1453
1454 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
1455 #ifdef CONFIG_BFIN_SIR0
1456         &bfin_sir0_device,
1457 #endif
1458 #ifdef CONFIG_BFIN_SIR1
1459         &bfin_sir1_device,
1460 #endif
1461 #ifdef CONFIG_BFIN_SIR2
1462         &bfin_sir2_device,
1463 #endif
1464 #ifdef CONFIG_BFIN_SIR3
1465         &bfin_sir3_device,
1466 #endif
1467 #endif
1468
1469 #if defined(CONFIG_FB_BF54X_LQ043) || defined(CONFIG_FB_BF54X_LQ043_MODULE)
1470         &bf54x_lq043_device,
1471 #endif
1472
1473 #if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
1474         &smsc911x_device,
1475 #endif
1476
1477 #if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
1478         &musb_device,
1479 #endif
1480
1481 #if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
1482         &bfin_isp1760_device,
1483 #endif
1484
1485 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
1486 #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
1487         &bfin_sport0_uart_device,
1488 #endif
1489 #ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
1490         &bfin_sport1_uart_device,
1491 #endif
1492 #ifdef CONFIG_SERIAL_BFIN_SPORT2_UART
1493         &bfin_sport2_uart_device,
1494 #endif
1495 #ifdef CONFIG_SERIAL_BFIN_SPORT3_UART
1496         &bfin_sport3_uart_device,
1497 #endif
1498 #endif
1499
1500 #if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE)
1501         &bfin_can0_device,
1502         &bfin_can1_device,
1503 #endif
1504
1505 #if defined(CONFIG_PATA_BF54X) || defined(CONFIG_PATA_BF54X_MODULE)
1506         &bfin_atapi_device,
1507 #endif
1508
1509 #if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
1510         &bf5xx_nand_device,
1511 #endif
1512
1513 #if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE)
1514         &bf54x_sdh_device,
1515 #endif
1516
1517 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
1518         &bf54x_spi_master0,
1519         &bf54x_spi_master1,
1520 #endif
1521
1522 #if defined(CONFIG_KEYBOARD_BFIN) || defined(CONFIG_KEYBOARD_BFIN_MODULE)
1523         &bf54x_kpad_device,
1524 #endif
1525
1526 #if defined(CONFIG_INPUT_BFIN_ROTARY) || defined(CONFIG_INPUT_BFIN_ROTARY_MODULE)
1527         &bfin_rotary_device,
1528 #endif
1529
1530 #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
1531         &i2c_bfin_twi0_device,
1532 #if !defined(CONFIG_BF542)
1533         &i2c_bfin_twi1_device,
1534 #endif
1535 #endif
1536
1537 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
1538         &bfin_device_gpiokeys,
1539 #endif
1540
1541 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
1542         &ezkit_flash_device,
1543 #endif
1544
1545 #if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) || \
1546         defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE) || \
1547         defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE)
1548         &bfin_pcm,
1549 #endif
1550
1551 #if defined(CONFIG_SND_BF5XX_SOC_AD1980) || defined(CONFIG_SND_BF5XX_SOC_AD1980_MODULE)
1552         &bfin_ad1980_codec_device,
1553 #endif
1554
1555 #if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
1556         &bfin_i2s,
1557 #endif
1558
1559 #if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE)
1560         &bfin_tdm,
1561 #endif
1562
1563 #if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE)
1564         &bfin_ac97,
1565 #endif
1566 };
1567
1568 static int __init ezkit_init(void)
1569 {
1570         printk(KERN_INFO "%s(): registering device resources\n", __func__);
1571
1572         i2c_register_board_info(0, bfin_i2c_board_info0,
1573                                 ARRAY_SIZE(bfin_i2c_board_info0));
1574 #if !defined(CONFIG_BF542)      /* The BF542 only has 1 TWI */
1575         i2c_register_board_info(1, bfin_i2c_board_info1,
1576                                 ARRAY_SIZE(bfin_i2c_board_info1));
1577 #endif
1578
1579         platform_add_devices(ezkit_devices, ARRAY_SIZE(ezkit_devices));
1580
1581         spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
1582
1583         return 0;
1584 }
1585
1586 arch_initcall(ezkit_init);
1587
1588 static struct platform_device *ezkit_early_devices[] __initdata = {
1589 #if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
1590 #ifdef CONFIG_SERIAL_BFIN_UART0
1591         &bfin_uart0_device,
1592 #endif
1593 #ifdef CONFIG_SERIAL_BFIN_UART1
1594         &bfin_uart1_device,
1595 #endif
1596 #ifdef CONFIG_SERIAL_BFIN_UART2
1597         &bfin_uart2_device,
1598 #endif
1599 #ifdef CONFIG_SERIAL_BFIN_UART3
1600         &bfin_uart3_device,
1601 #endif
1602 #endif
1603
1604 #if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE)
1605 #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
1606         &bfin_sport0_uart_device,
1607 #endif
1608 #ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
1609         &bfin_sport1_uart_device,
1610 #endif
1611 #ifdef CONFIG_SERIAL_BFIN_SPORT2_UART
1612         &bfin_sport2_uart_device,
1613 #endif
1614 #ifdef CONFIG_SERIAL_BFIN_SPORT3_UART
1615         &bfin_sport3_uart_device,
1616 #endif
1617 #endif
1618 };
1619
1620 void __init native_machine_early_platform_add_devices(void)
1621 {
1622         printk(KERN_INFO "register early platform devices\n");
1623         early_platform_add_devices(ezkit_early_devices,
1624                 ARRAY_SIZE(ezkit_early_devices));
1625 }