arch/blackfin/mach-bf548/boards/ezkit.c

   1 /*
   2  * Copyright 2004-2009 Analog Devices Inc.
   3  *                2005 National ICT Australia (NICTA)
   4  *                      Aidan Williams <aidan@nicta.com.au>
   5  *
   6  * Licensed under the GPL-2 or later.
   7  */
   8
   9 #include <linux/device.h>
  10 #include <linux/platform_device.h>
  11 #include <linux/mtd/mtd.h>
  12 #include <linux/mtd/partitions.h>
  13 #include <linux/mtd/physmap.h>
  14 #include <linux/spi/spi.h>
  15 #include <linux/spi/flash.h>
  16 #include <linux/irq.h>
  17 #include <linux/i2c.h>
  18 #include <linux/interrupt.h>
  19 #include <linux/usb/musb.h>
  20 #include <asm/bfin5xx_spi.h>
  21 #include <asm/dma.h>
  22 #include <asm/gpio.h>
  23 #include <asm/nand.h>
  24 #include <asm/dpmc.h>
  25 #include <asm/portmux.h>
  26 #include <asm/bfin_sdh.h>
  27 #include <mach/bf54x_keys.h>
  28 #include <linux/input.h>
  29 #include <linux/spi/ad7877.h>
  30
  31 /*
  32  * Name the Board for the /proc/cpuinfo
  33  */
  34 const char bfin_board_name[] = "ADI BF548-EZKIT";
  35
  36 /*
  37  *  Driver needs to know address, irq and flag pin.
  38  */
  39
  40 #if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
  41 #include <linux/usb/isp1760.h>
  42 static struct resource bfin_isp1760_resources[] = {
  43         [0] = {
  44                 .start  = 0x2C0C0000,
  45                 .end    = 0x2C0C0000 + 0xfffff,
  46                 .flags  = IORESOURCE_MEM,
  47         },
  48         [1] = {
  49                 .start  = IRQ_PG7,
  50                 .end    = IRQ_PG7,
  51                 .flags  = IORESOURCE_IRQ,
  52         },
  53 };
  54
  55 static struct isp1760_platform_data isp1760_priv = {
  56         .is_isp1761 = 0,
  57         .bus_width_16 = 1,
  58         .port1_otg = 0,
  59         .analog_oc = 0,
  60         .dack_polarity_high = 0,
  61         .dreq_polarity_high = 0,
  62 };
  63
  64 static struct platform_device bfin_isp1760_device = {
  65         .name           = "isp1760",
  66         .id             = 0,
  67         .dev = {
  68                 .platform_data = &isp1760_priv,
  69         },
  70         .num_resources  = ARRAY_SIZE(bfin_isp1760_resources),
  71         .resource       = bfin_isp1760_resources,
  72 };
  73 #endif
  74
  75 #if defined(CONFIG_FB_BF54X_LQ043) || defined(CONFIG_FB_BF54X_LQ043_MODULE)
  76
  77 #include <mach/bf54x-lq043.h>
  78
  79 static struct bfin_bf54xfb_mach_info bf54x_lq043_data = {
  80         .width =        95,
  81         .height =       54,
  82         .xres =         {480, 480, 480},
  83         .yres =         {272, 272, 272},
  84         .bpp =          {24, 24, 24},
  85         .disp =         GPIO_PE3,
  86 };
  87
  88 static struct resource bf54x_lq043_resources[] = {
  89         {
  90                 .start = IRQ_EPPI0_ERR,
  91                 .end = IRQ_EPPI0_ERR,
  92                 .flags = IORESOURCE_IRQ,
  93         },
  94 };
  95
  96 static struct platform_device bf54x_lq043_device = {
  97         .name           = "bf54x-lq043",
  98         .id             = -1,
  99         .num_resources  = ARRAY_SIZE(bf54x_lq043_resources),
 100         .resource       = bf54x_lq043_resources,
 101         .dev            = {
 102                 .platform_data = &bf54x_lq043_data,
 103         },
 104 };
 105 #endif
 106
 107 #if defined(CONFIG_KEYBOARD_BFIN) || defined(CONFIG_KEYBOARD_BFIN_MODULE)
 108 static const unsigned int bf548_keymap[] = {
 109         KEYVAL(0, 0, KEY_ENTER),
 110         KEYVAL(0, 1, KEY_HELP),
 111         KEYVAL(0, 2, KEY_0),
 112         KEYVAL(0, 3, KEY_BACKSPACE),
 113         KEYVAL(1, 0, KEY_TAB),
 114         KEYVAL(1, 1, KEY_9),
 115         KEYVAL(1, 2, KEY_8),
 116         KEYVAL(1, 3, KEY_7),
 117         KEYVAL(2, 0, KEY_DOWN),
 118         KEYVAL(2, 1, KEY_6),
 119         KEYVAL(2, 2, KEY_5),
 120         KEYVAL(2, 3, KEY_4),
 121         KEYVAL(3, 0, KEY_UP),
 122         KEYVAL(3, 1, KEY_3),
 123         KEYVAL(3, 2, KEY_2),
 124         KEYVAL(3, 3, KEY_1),
 125 };
 126
 127 static struct bfin_kpad_platform_data bf54x_kpad_data = {
 128         .rows                   = 4,
 129         .cols                   = 4,
 130         .keymap                 = bf548_keymap,
 131         .keymapsize             = ARRAY_SIZE(bf548_keymap),
 132         .repeat                 = 0,
 133         .debounce_time          = 5000, /* ns (5ms) */
 134         .coldrive_time          = 1000, /* ns (1ms) */
 135         .keyup_test_interval    = 50, /* ms (50ms) */
 136 };
 137
 138 static struct resource bf54x_kpad_resources[] = {
 139         {
 140                 .start = IRQ_KEY,
 141                 .end = IRQ_KEY,
 142                 .flags = IORESOURCE_IRQ,
 143         },
 144 };
 145
 146 static struct platform_device bf54x_kpad_device = {
 147         .name           = "bf54x-keys",
 148         .id             = -1,
 149         .num_resources  = ARRAY_SIZE(bf54x_kpad_resources),
 150         .resource       = bf54x_kpad_resources,
 151         .dev            = {
 152                 .platform_data = &bf54x_kpad_data,
 153         },
 154 };
 155 #endif
 156
 157 #if defined(CONFIG_INPUT_BFIN_ROTARY) || defined(CONFIG_INPUT_BFIN_ROTARY_MODULE)
 158 #include <asm/bfin_rotary.h>
 159
 160 static struct bfin_rotary_platform_data bfin_rotary_data = {
 161         /*.rotary_up_key     = KEY_UP,*/
 162         /*.rotary_down_key   = KEY_DOWN,*/
 163         .rotary_rel_code   = REL_WHEEL,
 164         .rotary_button_key = KEY_ENTER,
 165         .debounce          = 10,        /* 0..17 */
 166         .mode              = ROT_QUAD_ENC | ROT_DEBE,
 167 };
 168
 169 static struct resource bfin_rotary_resources[] = {
 170         {
 171                 .start = IRQ_CNT,
 172                 .end = IRQ_CNT,
 173                 .flags = IORESOURCE_IRQ,
 174         },
 175 };
 176
 177 static struct platform_device bfin_rotary_device = {
 178         .name           = "bfin-rotary",
 179         .id             = -1,
 180         .num_resources  = ARRAY_SIZE(bfin_rotary_resources),
 181         .resource       = bfin_rotary_resources,
 182         .dev            = {
 183                 .platform_data = &bfin_rotary_data,
 184         },
 185 };
 186 #endif
 187
 188 #if defined(CONFIG_INPUT_ADXL34X) || defined(CONFIG_INPUT_ADXL34X_MODULE)
 189 #include <linux/input/adxl34x.h>
 190 static const struct adxl34x_platform_data adxl34x_info = {
 191         .x_axis_offset = 0,
 192         .y_axis_offset = 0,
 193         .z_axis_offset = 0,
 194         .tap_threshold = 0x31,
 195         .tap_duration = 0x10,
 196         .tap_latency = 0x60,
 197         .tap_window = 0xF0,
 198         .tap_axis_control = ADXL_TAP_X_EN | ADXL_TAP_Y_EN | ADXL_TAP_Z_EN,
 199         .act_axis_control = 0xFF,
 200         .activity_threshold = 5,
 201         .inactivity_threshold = 3,
 202         .inactivity_time = 4,
 203         .free_fall_threshold = 0x7,
 204         .free_fall_time = 0x20,
 205         .data_rate = 0x8,
 206         .data_range = ADXL_FULL_RES,
 207
 208         .ev_type = EV_ABS,
 209         .ev_code_x = ABS_X,             /* EV_REL */
 210         .ev_code_y = ABS_Y,             /* EV_REL */
 211         .ev_code_z = ABS_Z,             /* EV_REL */
 212
 213         .ev_code_tap = {BTN_TOUCH, BTN_TOUCH, BTN_TOUCH}, /* EV_KEY x,y,z */
 214
 215 /*      .ev_code_ff = KEY_F,*/          /* EV_KEY */
 216 /*      .ev_code_act_inactivity = KEY_A,*/      /* EV_KEY */
 217         .power_mode = ADXL_AUTO_SLEEP | ADXL_LINK,
 218         .fifo_mode = ADXL_FIFO_STREAM,
 219         .orientation_enable = ADXL_EN_ORIENTATION_3D,
 220         .deadzone_angle = ADXL_DEADZONE_ANGLE_10p8,
 221         .divisor_length = ADXL_LP_FILTER_DIVISOR_16,
 222         /* EV_KEY {+Z, +Y, +X, -X, -Y, -Z} */
 223         .ev_codes_orient_3d = {BTN_Z, BTN_Y, BTN_X, BTN_A, BTN_B, BTN_C},
 224 };
 225 #endif
 226
 227 #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
 228 static struct platform_device rtc_device = {
 229         .name = "rtc-bfin",
 230         .id   = -1,
 231 };
 232 #endif
 233
 234 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
 235 #ifdef CONFIG_SERIAL_BFIN_UART0
 236 static struct resource bfin_uart0_resources[] = {
 237         {
 238                 .start = UART0_DLL,
 239                 .end = UART0_RBR+2,
 240                 .flags = IORESOURCE_MEM,
 241         },
 242         {
 243                 .start = IRQ_UART0_RX,
 244                 .end = IRQ_UART0_RX+1,
 245                 .flags = IORESOURCE_IRQ,
 246         },
 247         {
 248                 .start = IRQ_UART0_ERROR,
 249                 .end = IRQ_UART0_ERROR,
 250                 .flags = IORESOURCE_IRQ,
 251         },
 252         {
 253                 .start = CH_UART0_TX,
 254                 .end = CH_UART0_TX,
 255                 .flags = IORESOURCE_DMA,
 256         },
 257         {
 258                 .start = CH_UART0_RX,
 259                 .end = CH_UART0_RX,
 260                 .flags = IORESOURCE_DMA,
 261         },
 262 };
 263
 264 unsigned short bfin_uart0_peripherals[] = {
 265         P_UART0_TX, P_UART0_RX, 0
 266 };
 267
 268 static struct platform_device bfin_uart0_device = {
 269         .name = "bfin-uart",
 270         .id = 0,
 271         .num_resources = ARRAY_SIZE(bfin_uart0_resources),
 272         .resource = bfin_uart0_resources,
 273         .dev = {
 274                 .platform_data = &bfin_uart0_peripherals, /* Passed to driver */
 275         },
 276 };
 277 #endif
 278 #ifdef CONFIG_SERIAL_BFIN_UART1
 279 static struct resource bfin_uart1_resources[] = {
 280         {
 281                 .start = UART1_DLL,
 282                 .end = UART1_RBR+2,
 283                 .flags = IORESOURCE_MEM,
 284         },
 285         {
 286                 .start = IRQ_UART1_RX,
 287                 .end = IRQ_UART1_RX+1,
 288                 .flags = IORESOURCE_IRQ,
 289         },
 290         {
 291                 .start = IRQ_UART1_ERROR,
 292                 .end = IRQ_UART1_ERROR,
 293                 .flags = IORESOURCE_IRQ,
 294         },
 295         {
 296                 .start = CH_UART1_TX,
 297                 .end = CH_UART1_TX,
 298                 .flags = IORESOURCE_DMA,
 299         },
 300         {
 301                 .start = CH_UART1_RX,
 302                 .end = CH_UART1_RX,
 303                 .flags = IORESOURCE_DMA,
 304         },
 305 #ifdef CONFIG_BFIN_UART1_CTSRTS
 306         {       /* CTS pin -- 0 means not supported */
 307                 .start = GPIO_PE10,
 308                 .end = GPIO_PE10,
 309                 .flags = IORESOURCE_IO,
 310         },
 311         {       /* RTS pin -- 0 means not supported */
 312                 .start = GPIO_PE9,
 313                 .end = GPIO_PE9,
 314                 .flags = IORESOURCE_IO,
 315         },
 316 #endif
 317 };
 318
 319 unsigned short bfin_uart1_peripherals[] = {
 320         P_UART1_TX, P_UART1_RX,
 321 #ifdef CONFIG_BFIN_UART1_CTSRTS
 322         P_UART1_RTS, P_UART1_CTS,
 323 #endif
 324         0
 325 };
 326
 327 static struct platform_device bfin_uart1_device = {
 328         .name = "bfin-uart",
 329         .id = 1,
 330         .num_resources = ARRAY_SIZE(bfin_uart1_resources),
 331         .resource = bfin_uart1_resources,
 332         .dev = {
 333                 .platform_data = &bfin_uart1_peripherals, /* Passed to driver */
 334         },
 335 };
 336 #endif
 337 #ifdef CONFIG_SERIAL_BFIN_UART2
 338 static struct resource bfin_uart2_resources[] = {
 339         {
 340                 .start = UART2_DLL,
 341                 .end = UART2_RBR+2,
 342                 .flags = IORESOURCE_MEM,
 343         },
 344         {
 345                 .start = IRQ_UART2_RX,
 346                 .end = IRQ_UART2_RX+1,
 347                 .flags = IORESOURCE_IRQ,
 348         },
 349         {
 350                 .start = IRQ_UART2_ERROR,
 351                 .end = IRQ_UART2_ERROR,
 352                 .flags = IORESOURCE_IRQ,
 353         },
 354         {
 355                 .start = CH_UART2_TX,
 356                 .end = CH_UART2_TX,
 357                 .flags = IORESOURCE_DMA,
 358         },
 359         {
 360                 .start = CH_UART2_RX,
 361                 .end = CH_UART2_RX,
 362                 .flags = IORESOURCE_DMA,
 363         },
 364 };
 365
 366 unsigned short bfin_uart2_peripherals[] = {
 367         P_UART2_TX, P_UART2_RX, 0
 368 };
 369
 370 static struct platform_device bfin_uart2_device = {
 371         .name = "bfin-uart",
 372         .id = 2,
 373         .num_resources = ARRAY_SIZE(bfin_uart2_resources),
 374         .resource = bfin_uart2_resources,
 375         .dev = {
 376                 .platform_data = &bfin_uart2_peripherals, /* Passed to driver */
 377         },
 378 };
 379 #endif
 380 #ifdef CONFIG_SERIAL_BFIN_UART3
 381 static struct resource bfin_uart3_resources[] = {
 382         {
 383                 .start = UART3_DLL,
 384                 .end = UART3_RBR+2,
 385                 .flags = IORESOURCE_MEM,
 386         },
 387         {
 388                 .start = IRQ_UART3_RX,
 389                 .end = IRQ_UART3_RX+1,
 390                 .flags = IORESOURCE_IRQ,
 391         },
 392         {
 393                 .start = IRQ_UART3_ERROR,
 394                 .end = IRQ_UART3_ERROR,
 395                 .flags = IORESOURCE_IRQ,
 396         },
 397         {
 398                 .start = CH_UART3_TX,
 399                 .end = CH_UART3_TX,
 400                 .flags = IORESOURCE_DMA,
 401         },
 402         {
 403                 .start = CH_UART3_RX,
 404                 .end = CH_UART3_RX,
 405                 .flags = IORESOURCE_DMA,
 406         },
 407 #ifdef CONFIG_BFIN_UART3_CTSRTS
 408         {       /* CTS pin -- 0 means not supported */
 409                 .start = GPIO_PB3,
 410                 .end = GPIO_PB3,
 411                 .flags = IORESOURCE_IO,
 412         },
 413         {       /* RTS pin -- 0 means not supported */
 414                 .start = GPIO_PB2,
 415                 .end = GPIO_PB2,
 416                 .flags = IORESOURCE_IO,
 417         },
 418 #endif
 419 };
 420
 421 unsigned short bfin_uart3_peripherals[] = {
 422         P_UART3_TX, P_UART3_RX,
 423 #ifdef CONFIG_BFIN_UART3_CTSRTS
 424         P_UART3_RTS, P_UART3_CTS,
 425 #endif
 426         0
 427 };
 428
 429 static struct platform_device bfin_uart3_device = {
 430         .name = "bfin-uart",
 431         .id = 3,
 432         .num_resources = ARRAY_SIZE(bfin_uart3_resources),
 433         .resource = bfin_uart3_resources,
 434         .dev = {
 435                 .platform_data = &bfin_uart3_peripherals, /* Passed to driver */
 436         },
 437 };
 438 #endif
 439 #endif
 440
 441 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
 442 #ifdef CONFIG_BFIN_SIR0
 443 static struct resource bfin_sir0_resources[] = {
 444         {
 445                 .start = 0xFFC00400,
 446                 .end = 0xFFC004FF,
 447                 .flags = IORESOURCE_MEM,
 448         },
 449         {
 450                 .start = IRQ_UART0_RX,
 451                 .end = IRQ_UART0_RX+1,
 452                 .flags = IORESOURCE_IRQ,
 453         },
 454         {
 455                 .start = CH_UART0_RX,
 456                 .end = CH_UART0_RX+1,
 457                 .flags = IORESOURCE_DMA,
 458         },
 459 };
 460 static struct platform_device bfin_sir0_device = {
 461         .name = "bfin_sir",
 462         .id = 0,
 463         .num_resources = ARRAY_SIZE(bfin_sir0_resources),
 464         .resource = bfin_sir0_resources,
 465 };
 466 #endif
 467 #ifdef CONFIG_BFIN_SIR1
 468 static struct resource bfin_sir1_resources[] = {
 469         {
 470                 .start = 0xFFC02000,
 471                 .end = 0xFFC020FF,
 472                 .flags = IORESOURCE_MEM,
 473         },
 474         {
 475                 .start = IRQ_UART1_RX,
 476                 .end = IRQ_UART1_RX+1,
 477                 .flags = IORESOURCE_IRQ,
 478         },
 479         {
 480                 .start = CH_UART1_RX,
 481                 .end = CH_UART1_RX+1,
 482                 .flags = IORESOURCE_DMA,
 483         },
 484 };
 485 static struct platform_device bfin_sir1_device = {
 486         .name = "bfin_sir",
 487         .id = 1,
 488         .num_resources = ARRAY_SIZE(bfin_sir1_resources),
 489         .resource = bfin_sir1_resources,
 490 };
 491 #endif
 492 #ifdef CONFIG_BFIN_SIR2
 493 static struct resource bfin_sir2_resources[] = {
 494         {
 495                 .start = 0xFFC02100,
 496                 .end = 0xFFC021FF,
 497                 .flags = IORESOURCE_MEM,
 498         },
 499         {
 500                 .start = IRQ_UART2_RX,
 501                 .end = IRQ_UART2_RX+1,
 502                 .flags = IORESOURCE_IRQ,
 503         },
 504         {
 505                 .start = CH_UART2_RX,
 506                 .end = CH_UART2_RX+1,
 507                 .flags = IORESOURCE_DMA,
 508         },
 509 };
 510 static struct platform_device bfin_sir2_device = {
 511         .name = "bfin_sir",
 512         .id = 2,
 513         .num_resources = ARRAY_SIZE(bfin_sir2_resources),
 514         .resource = bfin_sir2_resources,
 515 };
 516 #endif
 517 #ifdef CONFIG_BFIN_SIR3
 518 static struct resource bfin_sir3_resources[] = {
 519         {
 520                 .start = 0xFFC03100,
 521                 .end = 0xFFC031FF,
 522                 .flags = IORESOURCE_MEM,
 523         },
 524         {
 525                 .start = IRQ_UART3_RX,
 526                 .end = IRQ_UART3_RX+1,
 527                 .flags = IORESOURCE_IRQ,
 528         },
 529         {
 530                 .start = CH_UART3_RX,
 531                 .end = CH_UART3_RX+1,
 532                 .flags = IORESOURCE_DMA,
 533         },
 534 };
 535 static struct platform_device bfin_sir3_device = {
 536         .name = "bfin_sir",
 537         .id = 3,
 538         .num_resources = ARRAY_SIZE(bfin_sir3_resources),
 539         .resource = bfin_sir3_resources,
 540 };
 541 #endif
 542 #endif
 543
 544 #if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
 545 #include <linux/smsc911x.h>
 546
 547 static struct resource smsc911x_resources[] = {
 548         {
 549                 .name = "smsc911x-memory",
 550                 .start = 0x24000000,
 551                 .end = 0x24000000 + 0xFF,
 552                 .flags = IORESOURCE_MEM,
 553         },
 554         {
 555                 .start = IRQ_PE8,
 556                 .end = IRQ_PE8,
 557                 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
 558         },
 559 };
 560
 561 static struct smsc911x_platform_config smsc911x_config = {
 562         .flags = SMSC911X_USE_32BIT,
 563         .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
 564         .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
 565         .phy_interface = PHY_INTERFACE_MODE_MII,
 566 };
 567
 568 static struct platform_device smsc911x_device = {
 569         .name = "smsc911x",
 570         .id = 0,
 571         .num_resources = ARRAY_SIZE(smsc911x_resources),
 572         .resource = smsc911x_resources,
 573         .dev = {
 574                 .platform_data = &smsc911x_config,
 575         },
 576 };
 577 #endif
 578
 579 #if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
 580 static struct resource musb_resources[] = {
 581         [0] = {
 582                 .start  = 0xFFC03C00,
 583                 .end    = 0xFFC040FF,
 584                 .flags  = IORESOURCE_MEM,
 585         },
 586         [1] = { /* general IRQ */
 587                 .start  = IRQ_USB_INT0,
 588                 .end    = IRQ_USB_INT0,
 589                 .flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
 590         },
 591         [2] = { /* DMA IRQ */
 592                 .start  = IRQ_USB_DMA,
 593                 .end    = IRQ_USB_DMA,
 594                 .flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
 595         },
 596 };
 597
 598 static struct musb_hdrc_config musb_config = {
 599         .multipoint     = 0,
 600         .dyn_fifo       = 0,
 601         .soft_con       = 1,
 602         .dma            = 1,
 603         .num_eps        = 8,
 604         .dma_channels   = 8,
 605         .gpio_vrsel     = GPIO_PE7,
 606 };
 607
 608 static struct musb_hdrc_platform_data musb_plat = {
 609 #if defined(CONFIG_USB_MUSB_OTG)
 610         .mode           = MUSB_OTG,
 611 #elif defined(CONFIG_USB_MUSB_HDRC_HCD)
 612         .mode           = MUSB_HOST,
 613 #elif defined(CONFIG_USB_GADGET_MUSB_HDRC)
 614         .mode           = MUSB_PERIPHERAL,
 615 #endif
 616         .config         = &musb_config,
 617 };
 618
 619 static u64 musb_dmamask = ~(u32)0;
 620
 621 static struct platform_device musb_device = {
 622         .name           = "musb_hdrc",
 623         .id             = 0,
 624         .dev = {
 625                 .dma_mask               = &musb_dmamask,
 626                 .coherent_dma_mask      = 0xffffffff,
 627                 .platform_data          = &musb_plat,
 628         },
 629         .num_resources  = ARRAY_SIZE(musb_resources),
 630         .resource       = musb_resources,
 631 };
 632 #endif
 633
 634 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
 635 #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
 636 static struct resource bfin_sport0_uart_resources[] = {
 637         {
 638                 .start = SPORT0_TCR1,
 639                 .end = SPORT0_MRCS3+4,
 640                 .flags = IORESOURCE_MEM,
 641         },
 642         {
 643                 .start = IRQ_SPORT0_RX,
 644                 .end = IRQ_SPORT0_RX+1,
 645                 .flags = IORESOURCE_IRQ,
 646         },
 647         {
 648                 .start = IRQ_SPORT0_ERROR,
 649                 .end = IRQ_SPORT0_ERROR,
 650                 .flags = IORESOURCE_IRQ,
 651         },
 652 };
 653
 654 unsigned short bfin_sport0_peripherals[] = {
 655         P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
 656         P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0
 657 };
 658
 659 static struct platform_device bfin_sport0_uart_device = {
 660         .name = "bfin-sport-uart",
 661         .id = 0,
 662         .num_resources = ARRAY_SIZE(bfin_sport0_uart_resources),
 663         .resource = bfin_sport0_uart_resources,
 664         .dev = {
 665                 .platform_data = &bfin_sport0_peripherals, /* Passed to driver */
 666         },
 667 };
 668 #endif
 669 #ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
 670 static struct resource bfin_sport1_uart_resources[] = {
 671         {
 672                 .start = SPORT1_TCR1,
 673                 .end = SPORT1_MRCS3+4,
 674                 .flags = IORESOURCE_MEM,
 675         },
 676         {
 677                 .start = IRQ_SPORT1_RX,
 678                 .end = IRQ_SPORT1_RX+1,
 679                 .flags = IORESOURCE_IRQ,
 680         },
 681         {
 682                 .start = IRQ_SPORT1_ERROR,
 683                 .end = IRQ_SPORT1_ERROR,
 684                 .flags = IORESOURCE_IRQ,
 685         },
 686 };
 687
 688 unsigned short bfin_sport1_peripherals[] = {
 689         P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
 690         P_SPORT1_DRPRI, P_SPORT1_RSCLK, P_SPORT1_DRSEC, P_SPORT1_DTSEC, 0
 691 };
 692
 693 static struct platform_device bfin_sport1_uart_device = {
 694         .name = "bfin-sport-uart",
 695         .id = 1,
 696         .num_resources = ARRAY_SIZE(bfin_sport1_uart_resources),
 697         .resource = bfin_sport1_uart_resources,
 698         .dev = {
 699                 .platform_data = &bfin_sport1_peripherals, /* Passed to driver */
 700         },
 701 };
 702 #endif
 703 #ifdef CONFIG_SERIAL_BFIN_SPORT2_UART
 704 static struct resource bfin_sport2_uart_resources[] = {
 705         {
 706                 .start = SPORT2_TCR1,
 707                 .end = SPORT2_MRCS3+4,
 708                 .flags = IORESOURCE_MEM,
 709         },
 710         {
 711                 .start = IRQ_SPORT2_RX,
 712                 .end = IRQ_SPORT2_RX+1,
 713                 .flags = IORESOURCE_IRQ,
 714         },
 715         {
 716                 .start = IRQ_SPORT2_ERROR,
 717                 .end = IRQ_SPORT2_ERROR,
 718                 .flags = IORESOURCE_IRQ,
 719         },
 720 };
 721
 722 unsigned short bfin_sport2_peripherals[] = {
 723         P_SPORT2_TFS, P_SPORT2_DTPRI, P_SPORT2_TSCLK, P_SPORT2_RFS,
 724         P_SPORT2_DRPRI, P_SPORT2_RSCLK, P_SPORT2_DRSEC, P_SPORT2_DTSEC, 0
 725 };
 726
 727 static struct platform_device bfin_sport2_uart_device = {
 728         .name = "bfin-sport-uart",
 729         .id = 2,
 730         .num_resources = ARRAY_SIZE(bfin_sport2_uart_resources),
 731         .resource = bfin_sport2_uart_resources,
 732         .dev = {
 733                 .platform_data = &bfin_sport2_peripherals, /* Passed to driver */
 734         },
 735 };
 736 #endif
 737 #ifdef CONFIG_SERIAL_BFIN_SPORT3_UART
 738 static struct resource bfin_sport3_uart_resources[] = {
 739         {
 740                 .start = SPORT3_TCR1,
 741                 .end = SPORT3_MRCS3+4,
 742                 .flags = IORESOURCE_MEM,
 743         },
 744         {
 745                 .start = IRQ_SPORT3_RX,
 746                 .end = IRQ_SPORT3_RX+1,
 747                 .flags = IORESOURCE_IRQ,
 748         },
 749         {
 750                 .start = IRQ_SPORT3_ERROR,
 751                 .end = IRQ_SPORT3_ERROR,
 752                 .flags = IORESOURCE_IRQ,
 753         },
 754 };
 755
 756 unsigned short bfin_sport3_peripherals[] = {
 757         P_SPORT3_TFS, P_SPORT3_DTPRI, P_SPORT3_TSCLK, P_SPORT3_RFS,
 758         P_SPORT3_DRPRI, P_SPORT3_RSCLK, P_SPORT3_DRSEC, P_SPORT3_DTSEC, 0
 759 };
 760
 761 static struct platform_device bfin_sport3_uart_device = {
 762         .name = "bfin-sport-uart",
 763         .id = 3,
 764         .num_resources = ARRAY_SIZE(bfin_sport3_uart_resources),
 765         .resource = bfin_sport3_uart_resources,
 766         .dev = {
 767                 .platform_data = &bfin_sport3_peripherals, /* Passed to driver */
 768         },
 769 };
 770 #endif
 771 #endif
 772
 773 #if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE)
 774 unsigned short bfin_can_peripherals[] = {
 775         P_CAN0_RX, P_CAN0_TX, 0
 776 };
 777
 778 static struct resource bfin_can_resources[] = {
 779         {
 780                 .start = 0xFFC02A00,
 781                 .end = 0xFFC02FFF,
 782                 .flags = IORESOURCE_MEM,
 783         },
 784         {
 785                 .start = IRQ_CAN0_RX,
 786                 .end = IRQ_CAN0_RX,
 787                 .flags = IORESOURCE_IRQ,
 788         },
 789         {
 790                 .start = IRQ_CAN0_TX,
 791                 .end = IRQ_CAN0_TX,
 792                 .flags = IORESOURCE_IRQ,
 793         },
 794         {
 795                 .start = IRQ_CAN0_ERROR,
 796                 .end = IRQ_CAN0_ERROR,
 797                 .flags = IORESOURCE_IRQ,
 798         },
 799 };
 800
 801 static struct platform_device bfin_can_device = {
 802         .name = "bfin_can",
 803         .num_resources = ARRAY_SIZE(bfin_can_resources),
 804         .resource = bfin_can_resources,
 805         .dev = {
 806                 .platform_data = &bfin_can_peripherals, /* Passed to driver */
 807         },
 808 };
 809 #endif
 810
 811 #if defined(CONFIG_PATA_BF54X) || defined(CONFIG_PATA_BF54X_MODULE)
 812 static struct resource bfin_atapi_resources[] = {
 813         {
 814                 .start = 0xFFC03800,
 815                 .end = 0xFFC0386F,
 816                 .flags = IORESOURCE_MEM,
 817         },
 818         {
 819                 .start = IRQ_ATAPI_ERR,
 820                 .end = IRQ_ATAPI_ERR,
 821                 .flags = IORESOURCE_IRQ,
 822         },
 823 };
 824
 825 static struct platform_device bfin_atapi_device = {
 826         .name = "pata-bf54x",
 827         .id = -1,
 828         .num_resources = ARRAY_SIZE(bfin_atapi_resources),
 829         .resource = bfin_atapi_resources,
 830 };
 831 #endif
 832
 833 #if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
 834 static struct mtd_partition partition_info[] = {
 835         {
 836                 .name = "linux kernel(nand)",
 837                 .offset = 0,
 838                 .size = 4 * 1024 * 1024,
 839         },
 840         {
 841                 .name = "file system(nand)",
 842                 .offset = MTDPART_OFS_APPEND,
 843                 .size = MTDPART_SIZ_FULL,
 844         },
 845 };
 846
 847 static struct bf5xx_nand_platform bf5xx_nand_platform = {
 848         .page_size = NFC_PG_SIZE_256,
 849         .data_width = NFC_NWIDTH_8,
 850         .partitions = partition_info,
 851         .nr_partitions = ARRAY_SIZE(partition_info),
 852         .rd_dly = 3,
 853         .wr_dly = 3,
 854 };
 855
 856 static struct resource bf5xx_nand_resources[] = {
 857         {
 858                 .start = 0xFFC03B00,
 859                 .end = 0xFFC03B4F,
 860                 .flags = IORESOURCE_MEM,
 861         },
 862         {
 863                 .start = CH_NFC,
 864                 .end = CH_NFC,
 865                 .flags = IORESOURCE_IRQ,
 866         },
 867 };
 868
 869 static struct platform_device bf5xx_nand_device = {
 870         .name = "bf5xx-nand",
 871         .id = 0,
 872         .num_resources = ARRAY_SIZE(bf5xx_nand_resources),
 873         .resource = bf5xx_nand_resources,
 874         .dev = {
 875                 .platform_data = &bf5xx_nand_platform,
 876         },
 877 };
 878 #endif
 879
 880 #if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE)
 881
 882 static struct bfin_sd_host bfin_sdh_data = {
 883         .dma_chan = CH_SDH,
 884         .irq_int0 = IRQ_SDH_MASK0,
 885         .pin_req = {P_SD_D0, P_SD_D1, P_SD_D2, P_SD_D3, P_SD_CLK, P_SD_CMD, 0},
 886 };
 887
 888 static struct platform_device bf54x_sdh_device = {
 889         .name = "bfin-sdh",
 890         .id = 0,
 891         .dev = {
 892                 .platform_data = &bfin_sdh_data,
 893         },
 894 };
 895 #endif
 896
 897 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
 898 static struct mtd_partition ezkit_partitions[] = {
 899         {
 900                 .name       = "bootloader(nor)",
 901                 .size       = 0x40000,
 902                 .offset     = 0,
 903         }, {
 904                 .name       = "linux kernel(nor)",
 905                 .size       = 0x400000,
 906                 .offset     = MTDPART_OFS_APPEND,
 907         }, {
 908                 .name       = "file system(nor)",
 909                 .size       = MTDPART_SIZ_FULL,
 910                 .offset     = MTDPART_OFS_APPEND,
 911         }
 912 };
 913
 914 static struct physmap_flash_data ezkit_flash_data = {
 915         .width      = 2,
 916         .parts      = ezkit_partitions,
 917         .nr_parts   = ARRAY_SIZE(ezkit_partitions),
 918 };
 919
 920 static struct resource ezkit_flash_resource = {
 921         .start = 0x20000000,
 922         .end   = 0x21ffffff,
 923         .flags = IORESOURCE_MEM,
 924 };
 925
 926 static struct platform_device ezkit_flash_device = {
 927         .name          = "physmap-flash",
 928         .id            = 0,
 929         .dev = {
 930                 .platform_data = &ezkit_flash_data,
 931         },
 932         .num_resources = 1,
 933         .resource      = &ezkit_flash_resource,
 934 };
 935 #endif
 936
 937 #if defined(CONFIG_MTD_M25P80) \
 938         || defined(CONFIG_MTD_M25P80_MODULE)
 939 /* SPI flash chip (m25p16) */
 940 static struct mtd_partition bfin_spi_flash_partitions[] = {
 941         {
 942                 .name = "bootloader(spi)",
 943                 .size = 0x00040000,
 944                 .offset = 0,
 945                 .mask_flags = MTD_CAP_ROM
 946         }, {
 947                 .name = "linux kernel(spi)",
 948                 .size = MTDPART_SIZ_FULL,
 949                 .offset = MTDPART_OFS_APPEND,
 950         }
 951 };
 952
 953 static struct flash_platform_data bfin_spi_flash_data = {
 954         .name = "m25p80",
 955         .parts = bfin_spi_flash_partitions,
 956         .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
 957         .type = "m25p16",
 958 };
 959
 960 static struct bfin5xx_spi_chip spi_flash_chip_info = {
 961         .enable_dma = 0,         /* use dma transfer with this chip*/
 962         .bits_per_word = 8,
 963 };
 964 #endif
 965
 966 #if defined(CONFIG_SND_BLACKFIN_AD183X) \
 967         || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE)
 968 static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
 969         .enable_dma = 0,
 970         .bits_per_word = 16,
 971 };
 972 #endif
 973
 974 #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
 975 static struct bfin5xx_spi_chip spi_ad7877_chip_info = {
 976         .enable_dma = 0,
 977         .bits_per_word = 16,
 978 };
 979
 980 static const struct ad7877_platform_data bfin_ad7877_ts_info = {
 981         .model                  = 7877,
 982         .vref_delay_usecs       = 50,   /* internal, no capacitor */
 983         .x_plate_ohms           = 419,
 984         .y_plate_ohms           = 486,
 985         .pressure_max           = 1000,
 986         .pressure_min           = 0,
 987         .stopacq_polarity       = 1,
 988         .first_conversion_delay = 3,
 989         .acquisition_time       = 1,
 990         .averaging              = 1,
 991         .pen_down_acc_interval  = 1,
 992 };
 993 #endif
 994
 995 #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
 996 static struct bfin5xx_spi_chip spidev_chip_info = {
 997         .enable_dma = 0,
 998         .bits_per_word = 8,
 999 };
1000 #endif
1001
1002 #if defined(CONFIG_INPUT_ADXL34X_SPI) || defined(CONFIG_INPUT_ADXL34X_SPI_MODULE)
1003 static struct bfin5xx_spi_chip spi_adxl34x_chip_info = {
1004         .enable_dma = 0,         /* use dma transfer with this chip*/
1005         .bits_per_word = 8,
1006 };
1007 #endif
1008
1009 static struct spi_board_info bfin_spi_board_info[] __initdata = {
1010 #if defined(CONFIG_MTD_M25P80) \
1011         || defined(CONFIG_MTD_M25P80_MODULE)
1012         {
1013                 /* the modalias must be the same as spi device driver name */
1014                 .modalias = "m25p80", /* Name of spi_driver for this device */
1015                 .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
1016                 .bus_num = 0, /* Framework bus number */
1017                 .chip_select = 1, /* SPI_SSEL1*/
1018                 .platform_data = &bfin_spi_flash_data,
1019                 .controller_data = &spi_flash_chip_info,
1020                 .mode = SPI_MODE_3,
1021         },
1022 #endif
1023 #if defined(CONFIG_SND_BLACKFIN_AD183X) \
1024         || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE)
1025         {
1026                 .modalias = "ad1836",
1027                 .max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
1028                 .bus_num = 1,
1029                 .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
1030                 .controller_data = &ad1836_spi_chip_info,
1031         },
1032 #endif
1033 #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
1034         {
1035                 .modalias               = "ad7877",
1036                 .platform_data          = &bfin_ad7877_ts_info,
1037                 .irq                    = IRQ_PB4,      /* old boards (<=Rev 1.3) use IRQ_PJ11 */
1038                 .max_speed_hz           = 12500000,     /* max spi clock (SCK) speed in HZ */
1039                 .bus_num                = 0,
1040                 .chip_select            = 2,
1041                 .controller_data = &spi_ad7877_chip_info,
1042         },
1043 #endif
1044 #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
1045         {
1046                 .modalias = "spidev",
1047                 .max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
1048                 .bus_num = 0,
1049                 .chip_select = 1,
1050                 .controller_data = &spidev_chip_info,
1051         },
1052 #endif
1053 #if defined(CONFIG_INPUT_ADXL34X_SPI) || defined(CONFIG_INPUT_ADXL34X_SPI_MODULE)
1054         {
1055                 .modalias               = "adxl34x",
1056                 .platform_data          = &adxl34x_info,
1057                 .irq                    = IRQ_PC5,
1058                 .max_speed_hz           = 5000000,     /* max spi clock (SCK) speed in HZ */
1059                 .bus_num                = 1,
1060                 .chip_select            = 2,
1061                 .controller_data = &spi_adxl34x_chip_info,
1062                 .mode = SPI_MODE_3,
1063         },
1064 #endif
1065 };
1066 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
1067 /* SPI (0) */
1068 static struct resource bfin_spi0_resource[] = {
1069         [0] = {
1070                 .start = SPI0_REGBASE,
1071                 .end   = SPI0_REGBASE + 0xFF,
1072                 .flags = IORESOURCE_MEM,
1073         },
1074         [1] = {
1075                 .start = CH_SPI0,
1076                 .end   = CH_SPI0,
1077                 .flags = IORESOURCE_DMA,
1078         },
1079         [2] = {
1080                 .start = IRQ_SPI0,
1081                 .end   = IRQ_SPI0,
1082                 .flags = IORESOURCE_IRQ,
1083         }
1084 };
1085
1086 /* SPI (1) */
1087 static struct resource bfin_spi1_resource[] = {
1088         [0] = {
1089                 .start = SPI1_REGBASE,
1090                 .end   = SPI1_REGBASE + 0xFF,
1091                 .flags = IORESOURCE_MEM,
1092         },
1093         [1] = {
1094                 .start = CH_SPI1,
1095                 .end   = CH_SPI1,
1096                 .flags = IORESOURCE_DMA,
1097         },
1098         [2] = {
1099                 .start = IRQ_SPI1,
1100                 .end   = IRQ_SPI1,
1101                 .flags = IORESOURCE_IRQ,
1102         }
1103 };
1104
1105 /* SPI controller data */
1106 static struct bfin5xx_spi_master bf54x_spi_master_info0 = {
1107         .num_chipselect = 3,
1108         .enable_dma = 1,  /* master has the ability to do dma transfer */
1109         .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
1110 };
1111
1112 static struct platform_device bf54x_spi_master0 = {
1113         .name = "bfin-spi",
1114         .id = 0, /* Bus number */
1115         .num_resources = ARRAY_SIZE(bfin_spi0_resource),
1116         .resource = bfin_spi0_resource,
1117         .dev = {
1118                 .platform_data = &bf54x_spi_master_info0, /* Passed to driver */
1119                 },
1120 };
1121
1122 static struct bfin5xx_spi_master bf54x_spi_master_info1 = {
1123         .num_chipselect = 3,
1124         .enable_dma = 1,  /* master has the ability to do dma transfer */
1125         .pin_req = {P_SPI1_SCK, P_SPI1_MISO, P_SPI1_MOSI, 0},
1126 };
1127
1128 static struct platform_device bf54x_spi_master1 = {
1129         .name = "bfin-spi",
1130         .id = 1, /* Bus number */
1131         .num_resources = ARRAY_SIZE(bfin_spi1_resource),
1132         .resource = bfin_spi1_resource,
1133         .dev = {
1134                 .platform_data = &bf54x_spi_master_info1, /* Passed to driver */
1135                 },
1136 };
1137 #endif  /* spi master and devices */
1138
1139 #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
1140 static struct resource bfin_twi0_resource[] = {
1141         [0] = {
1142                 .start = TWI0_REGBASE,
1143                 .end   = TWI0_REGBASE + 0xFF,
1144                 .flags = IORESOURCE_MEM,
1145         },
1146         [1] = {
1147                 .start = IRQ_TWI0,
1148                 .end   = IRQ_TWI0,
1149                 .flags = IORESOURCE_IRQ,
1150         },
1151 };
1152
1153 static struct platform_device i2c_bfin_twi0_device = {
1154         .name = "i2c-bfin-twi",
1155         .id = 0,
1156         .num_resources = ARRAY_SIZE(bfin_twi0_resource),
1157         .resource = bfin_twi0_resource,
1158 };
1159
1160 #if !defined(CONFIG_BF542)      /* The BF542 only has 1 TWI */
1161 static struct resource bfin_twi1_resource[] = {
1162         [0] = {
1163                 .start = TWI1_REGBASE,
1164                 .end   = TWI1_REGBASE + 0xFF,
1165                 .flags = IORESOURCE_MEM,
1166         },
1167         [1] = {
1168                 .start = IRQ_TWI1,
1169                 .end   = IRQ_TWI1,
1170                 .flags = IORESOURCE_IRQ,
1171         },
1172 };
1173
1174 static struct platform_device i2c_bfin_twi1_device = {
1175         .name = "i2c-bfin-twi",
1176         .id = 1,
1177         .num_resources = ARRAY_SIZE(bfin_twi1_resource),
1178         .resource = bfin_twi1_resource,
1179 };
1180 #endif
1181 #endif
1182
1183 static struct i2c_board_info __initdata bfin_i2c_board_info0[] = {
1184 };
1185
1186 #if !defined(CONFIG_BF542)      /* The BF542 only has 1 TWI */
1187 static struct i2c_board_info __initdata bfin_i2c_board_info1[] = {
1188 #if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
1189         {
1190                 I2C_BOARD_INFO("pcf8574_lcd", 0x22),
1191         },
1192 #endif
1193 #if defined(CONFIG_INPUT_PCF8574) || defined(CONFIG_INPUT_PCF8574_MODULE)
1194         {
1195                 I2C_BOARD_INFO("pcf8574_keypad", 0x27),
1196                 .irq = 212,
1197         },
1198 #endif
1199 #if defined(CONFIG_INPUT_ADXL34X_I2C) || defined(CONFIG_INPUT_ADXL34X_I2C_MODULE)
1200         {
1201                 I2C_BOARD_INFO("adxl34x", 0x53),
1202                 .irq = IRQ_PC5,
1203                 .platform_data = (void *)&adxl34x_info,
1204         },
1205 #endif
1206 };
1207 #endif
1208
1209 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
1210 #include <linux/gpio_keys.h>
1211
1212 static struct gpio_keys_button bfin_gpio_keys_table[] = {
1213         {BTN_0, GPIO_PB8, 1, "gpio-keys: BTN0"},
1214         {BTN_1, GPIO_PB9, 1, "gpio-keys: BTN1"},
1215         {BTN_2, GPIO_PB10, 1, "gpio-keys: BTN2"},
1216         {BTN_3, GPIO_PB11, 1, "gpio-keys: BTN3"},
1217 };
1218
1219 static struct gpio_keys_platform_data bfin_gpio_keys_data = {
1220         .buttons        = bfin_gpio_keys_table,
1221         .nbuttons       = ARRAY_SIZE(bfin_gpio_keys_table),
1222 };
1223
1224 static struct platform_device bfin_device_gpiokeys = {
1225         .name      = "gpio-keys",
1226         .dev = {
1227                 .platform_data = &bfin_gpio_keys_data,
1228         },
1229 };
1230 #endif
1231
1232 static const unsigned int cclk_vlev_datasheet[] =
1233 {
1234 /*
1235  * Internal VLEV BF54XSBBC1533
1236  ****temporarily using these values until data sheet is updated
1237  */
1238         VRPAIR(VLEV_085, 150000000),
1239         VRPAIR(VLEV_090, 250000000),
1240         VRPAIR(VLEV_110, 276000000),
1241         VRPAIR(VLEV_115, 301000000),
1242         VRPAIR(VLEV_120, 525000000),
1243         VRPAIR(VLEV_125, 550000000),
1244         VRPAIR(VLEV_130, 600000000),
1245 };
1246
1247 static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
1248         .tuple_tab = cclk_vlev_datasheet,
1249         .tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
1250         .vr_settling_time = 25 /* us */,
1251 };
1252
1253 static struct platform_device bfin_dpmc = {
1254         .name = "bfin dpmc",
1255         .dev = {
1256                 .platform_data = &bfin_dmpc_vreg_data,
1257         },
1258 };
1259
1260 #if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
1261 static struct platform_device bfin_i2s = {
1262         .name = "bfin-i2s",
1263         .id = CONFIG_SND_BF5XX_SPORT_NUM,
1264         /* TODO: add platform data here */
1265 };
1266 #endif
1267
1268 #if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE)
1269 static struct platform_device bfin_tdm = {
1270         .name = "bfin-tdm",
1271         .id = CONFIG_SND_BF5XX_SPORT_NUM,
1272         /* TODO: add platform data here */
1273 };
1274 #endif
1275
1276 #if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE)
1277 static struct platform_device bfin_ac97 = {
1278         .name = "bfin-ac97",
1279         .id = CONFIG_SND_BF5XX_SPORT_NUM,
1280         /* TODO: add platform data here */
1281 };
1282 #endif
1283
1284 static struct platform_device *ezkit_devices[] __initdata = {
1285
1286         &bfin_dpmc,
1287
1288 #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
1289         &rtc_device,
1290 #endif
1291
1292 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
1293 #ifdef CONFIG_SERIAL_BFIN_UART0
1294         &bfin_uart0_device,
1295 #endif
1296 #ifdef CONFIG_SERIAL_BFIN_UART1
1297         &bfin_uart1_device,
1298 #endif
1299 #ifdef CONFIG_SERIAL_BFIN_UART2
1300         &bfin_uart2_device,
1301 #endif
1302 #ifdef CONFIG_SERIAL_BFIN_UART3
1303         &bfin_uart3_device,
1304 #endif
1305 #endif
1306
1307 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
1308 #ifdef CONFIG_BFIN_SIR0
1309         &bfin_sir0_device,
1310 #endif
1311 #ifdef CONFIG_BFIN_SIR1
1312         &bfin_sir1_device,
1313 #endif
1314 #ifdef CONFIG_BFIN_SIR2
1315         &bfin_sir2_device,
1316 #endif
1317 #ifdef CONFIG_BFIN_SIR3
1318         &bfin_sir3_device,
1319 #endif
1320 #endif
1321
1322 #if defined(CONFIG_FB_BF54X_LQ043) || defined(CONFIG_FB_BF54X_LQ043_MODULE)
1323         &bf54x_lq043_device,
1324 #endif
1325
1326 #if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
1327         &smsc911x_device,
1328 #endif
1329
1330 #if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
1331         &musb_device,
1332 #endif
1333
1334 #if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
1335         &bfin_isp1760_device,
1336 #endif
1337
1338 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
1339 #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
1340         &bfin_sport0_uart_device,
1341 #endif
1342 #ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
1343         &bfin_sport1_uart_device,
1344 #endif
1345 #ifdef CONFIG_SERIAL_BFIN_SPORT2_UART
1346         &bfin_sport2_uart_device,
1347 #endif
1348 #ifdef CONFIG_SERIAL_BFIN_SPORT3_UART
1349         &bfin_sport3_uart_device,
1350 #endif
1351 #endif
1352
1353 #if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE)
1354         &bfin_can_device,
1355 #endif
1356
1357 #if defined(CONFIG_PATA_BF54X) || defined(CONFIG_PATA_BF54X_MODULE)
1358         &bfin_atapi_device,
1359 #endif
1360
1361 #if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
1362         &bf5xx_nand_device,
1363 #endif
1364
1365 #if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE)
1366         &bf54x_sdh_device,
1367 #endif
1368
1369 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
1370         &bf54x_spi_master0,
1371         &bf54x_spi_master1,
1372 #endif
1373
1374 #if defined(CONFIG_KEYBOARD_BFIN) || defined(CONFIG_KEYBOARD_BFIN_MODULE)
1375         &bf54x_kpad_device,
1376 #endif
1377
1378 #if defined(CONFIG_INPUT_BFIN_ROTARY) || defined(CONFIG_INPUT_BFIN_ROTARY_MODULE)
1379         &bfin_rotary_device,
1380 #endif
1381
1382 #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
1383         &i2c_bfin_twi0_device,
1384 #if !defined(CONFIG_BF542)
1385         &i2c_bfin_twi1_device,
1386 #endif
1387 #endif
1388
1389 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
1390         &bfin_device_gpiokeys,
1391 #endif
1392
1393 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
1394         &ezkit_flash_device,
1395 #endif
1396
1397 #if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
1398         &bfin_i2s,
1399 #endif
1400
1401 #if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE)
1402         &bfin_tdm,
1403 #endif
1404
1405 #if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE)
1406         &bfin_ac97,
1407 #endif
1408 };
1409
1410 static int __init ezkit_init(void)
1411 {
1412         printk(KERN_INFO "%s(): registering device resources\n", __func__);
1413
1414         i2c_register_board_info(0, bfin_i2c_board_info0,
1415                                 ARRAY_SIZE(bfin_i2c_board_info0));
1416 #if !defined(CONFIG_BF542)      /* The BF542 only has 1 TWI */
1417         i2c_register_board_info(1, bfin_i2c_board_info1,
1418                                 ARRAY_SIZE(bfin_i2c_board_info1));
1419 #endif
1420
1421         platform_add_devices(ezkit_devices, ARRAY_SIZE(ezkit_devices));
1422
1423         spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
1424
1425         return 0;
1426 }
1427
1428 arch_initcall(ezkit_init);
1429
1430 static struct platform_device *ezkit_early_devices[] __initdata = {
1431 #if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
1432 #ifdef CONFIG_SERIAL_BFIN_UART0
1433         &bfin_uart0_device,
1434 #endif
1435 #ifdef CONFIG_SERIAL_BFIN_UART1
1436         &bfin_uart1_device,
1437 #endif
1438 #ifdef CONFIG_SERIAL_BFIN_UART2
1439         &bfin_uart2_device,
1440 #endif
1441 #ifdef CONFIG_SERIAL_BFIN_UART3
1442         &bfin_uart3_device,
1443 #endif
1444 #endif
1445
1446 #if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE)
1447 #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
1448         &bfin_sport0_uart_device,
1449 #endif
1450 #ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
1451         &bfin_sport1_uart_device,
1452 #endif
1453 #ifdef CONFIG_SERIAL_BFIN_SPORT2_UART
1454         &bfin_sport2_uart_device,
1455 #endif
1456 #ifdef CONFIG_SERIAL_BFIN_SPORT3_UART
1457         &bfin_sport3_uart_device,
1458 #endif
1459 #endif
1460 };
1461
1462 void __init native_machine_early_platform_add_devices(void)
1463 {
1464         printk(KERN_INFO "register early platform devices\n");
1465         early_platform_add_devices(ezkit_early_devices,
1466                 ARRAY_SIZE(ezkit_early_devices));
1467 }