Merge branch 'unicore32' of git://github.com/gxt/linux
[pandora-kernel.git] / arch / blackfin / mach-bf537 / boards / tcm_bf537.c
1 /*
2  * Copyright 2004-2009 Analog Devices Inc.
3  *           2008-2009 Bluetechnix
4  *                2005 National ICT Australia (NICTA)
5  *                      Aidan Williams <aidan@nicta.com.au>
6  *
7  * Licensed under the GPL-2 or later.
8  */
9
10 #include <linux/device.h>
11 #include <linux/etherdevice.h>
12 #include <linux/export.h>
13 #include <linux/platform_device.h>
14 #include <linux/mtd/mtd.h>
15 #include <linux/mtd/partitions.h>
16 #include <linux/mtd/physmap.h>
17 #include <linux/spi/spi.h>
18 #include <linux/spi/flash.h>
19 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
20 #include <linux/usb/isp1362.h>
21 #endif
22 #include <linux/ata_platform.h>
23 #include <linux/irq.h>
24 #include <asm/dma.h>
25 #include <asm/bfin5xx_spi.h>
26 #include <asm/portmux.h>
27 #include <asm/dpmc.h>
28 #include <linux/spi/mmc_spi.h>
29
30 /*
31  * Name the Board for the /proc/cpuinfo
32  */
33 const char bfin_board_name[] = "Bluetechnix TCM BF537";
34
35 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
36 /* all SPI peripherals info goes here */
37
38 #if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
39 static struct mtd_partition bfin_spi_flash_partitions[] = {
40         {
41                 .name = "bootloader(spi)",
42                 .size = 0x00020000,
43                 .offset = 0,
44                 .mask_flags = MTD_CAP_ROM
45         }, {
46                 .name = "linux kernel(spi)",
47                 .size = 0xe0000,
48                 .offset = 0x20000
49         }, {
50                 .name = "file system(spi)",
51                 .size = 0x700000,
52                 .offset = 0x00100000,
53         }
54 };
55
56 static struct flash_platform_data bfin_spi_flash_data = {
57         .name = "m25p80",
58         .parts = bfin_spi_flash_partitions,
59         .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
60         .type = "m25p64",
61 };
62
63 /* SPI flash chip (m25p64) */
64 static struct bfin5xx_spi_chip spi_flash_chip_info = {
65         .enable_dma = 0,         /* use dma transfer with this chip*/
66 };
67 #endif
68
69 #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
70 static struct bfin5xx_spi_chip mmc_spi_chip_info = {
71         .enable_dma = 0,
72 };
73 #endif
74
75 static struct spi_board_info bfin_spi_board_info[] __initdata = {
76 #if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
77         {
78                 /* the modalias must be the same as spi device driver name */
79                 .modalias = "m25p80", /* Name of spi_driver for this device */
80                 .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
81                 .bus_num = 0, /* Framework bus number */
82                 .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
83                 .platform_data = &bfin_spi_flash_data,
84                 .controller_data = &spi_flash_chip_info,
85                 .mode = SPI_MODE_3,
86         },
87 #endif
88
89 #if defined(CONFIG_SND_BF5XX_SOC_AD183X) || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE)
90         {
91                 .modalias = "ad183x",
92                 .max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
93                 .bus_num = 0,
94                 .chip_select = 4,
95         },
96 #endif
97
98 #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
99         {
100                 .modalias = "mmc_spi",
101                 .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
102                 .bus_num = 0,
103                 .chip_select = 1,
104                 .controller_data = &mmc_spi_chip_info,
105                 .mode = SPI_MODE_3,
106         },
107 #endif
108 };
109
110 /* SPI (0) */
111 static struct resource bfin_spi0_resource[] = {
112         [0] = {
113                 .start = SPI0_REGBASE,
114                 .end   = SPI0_REGBASE + 0xFF,
115                 .flags = IORESOURCE_MEM,
116                 },
117         [1] = {
118                 .start = CH_SPI,
119                 .end   = CH_SPI,
120                 .flags = IORESOURCE_DMA,
121         },
122         [2] = {
123                 .start = IRQ_SPI,
124                 .end   = IRQ_SPI,
125                 .flags = IORESOURCE_IRQ,
126         }
127 };
128
129 /* SPI controller data */
130 static struct bfin5xx_spi_master bfin_spi0_info = {
131         .num_chipselect = 8,
132         .enable_dma = 1,  /* master has the ability to do dma transfer */
133         .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
134 };
135
136 static struct platform_device bfin_spi0_device = {
137         .name = "bfin-spi",
138         .id = 0, /* Bus number */
139         .num_resources = ARRAY_SIZE(bfin_spi0_resource),
140         .resource = bfin_spi0_resource,
141         .dev = {
142                 .platform_data = &bfin_spi0_info, /* Passed to driver */
143         },
144 };
145 #endif  /* spi master and devices */
146
147 #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
148 static struct platform_device rtc_device = {
149         .name = "rtc-bfin",
150         .id   = -1,
151 };
152 #endif
153
154 #if defined(CONFIG_FB_HITACHI_TX09) || defined(CONFIG_FB_HITACHI_TX09_MODULE)
155 static struct platform_device hitachi_fb_device = {
156         .name = "hitachi-tx09",
157 };
158 #endif
159
160 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
161 #include <linux/smc91x.h>
162
163 static struct smc91x_platdata smc91x_info = {
164         .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
165         .leda = RPC_LED_100_10,
166         .ledb = RPC_LED_TX_RX,
167 };
168
169 static struct resource smc91x_resources[] = {
170         {
171                 .start = 0x20200300,
172                 .end = 0x20200300 + 16,
173                 .flags = IORESOURCE_MEM,
174         }, {
175                 .start = IRQ_PF14,
176                 .end = IRQ_PF14,
177                 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
178                 },
179 };
180
181 static struct platform_device smc91x_device = {
182         .name = "smc91x",
183         .id = 0,
184         .num_resources = ARRAY_SIZE(smc91x_resources),
185         .resource = smc91x_resources,
186         .dev    = {
187                 .platform_data  = &smc91x_info,
188         },
189 };
190 #endif
191
192 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
193 static struct resource isp1362_hcd_resources[] = {
194         {
195                 .start = 0x20308000,
196                 .end = 0x20308000,
197                 .flags = IORESOURCE_MEM,
198         }, {
199                 .start = 0x20308004,
200                 .end = 0x20308004,
201                 .flags = IORESOURCE_MEM,
202         }, {
203                 .start = IRQ_PG15,
204                 .end = IRQ_PG15,
205                 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
206         },
207 };
208
209 static struct isp1362_platform_data isp1362_priv = {
210         .sel15Kres = 1,
211         .clknotstop = 0,
212         .oc_enable = 0,
213         .int_act_high = 0,
214         .int_edge_triggered = 0,
215         .remote_wakeup_connected = 0,
216         .no_power_switching = 1,
217         .power_switching_mode = 0,
218 };
219
220 static struct platform_device isp1362_hcd_device = {
221         .name = "isp1362-hcd",
222         .id = 0,
223         .dev = {
224                 .platform_data = &isp1362_priv,
225         },
226         .num_resources = ARRAY_SIZE(isp1362_hcd_resources),
227         .resource = isp1362_hcd_resources,
228 };
229 #endif
230
231 #if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
232 static struct resource net2272_bfin_resources[] = {
233         {
234                 .start = 0x20300000,
235                 .end = 0x20300000 + 0x100,
236                 .flags = IORESOURCE_MEM,
237         }, {
238                 .start = IRQ_PG13,
239                 .end = IRQ_PG13,
240                 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
241         },
242 };
243
244 static struct platform_device net2272_bfin_device = {
245         .name = "net2272",
246         .id = -1,
247         .num_resources = ARRAY_SIZE(net2272_bfin_resources),
248         .resource = net2272_bfin_resources,
249 };
250 #endif
251
252 #if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE)
253 static struct mtd_partition cm_partitions[] = {
254         {
255                 .name   = "bootloader(nor)",
256                 .size   = 0x40000,
257                 .offset = 0,
258         }, {
259                 .name   = "linux kernel(nor)",
260                 .size   = 0x100000,
261                 .offset = MTDPART_OFS_APPEND,
262         }, {
263                 .name   = "file system(nor)",
264                 .size   = MTDPART_SIZ_FULL,
265                 .offset = MTDPART_OFS_APPEND,
266         }
267 };
268
269 static struct physmap_flash_data cm_flash_data = {
270         .width    = 2,
271         .parts    = cm_partitions,
272         .nr_parts = ARRAY_SIZE(cm_partitions),
273 };
274
275 static unsigned cm_flash_gpios[] = { GPIO_PF4, GPIO_PF5 };
276
277 static struct resource cm_flash_resource[] = {
278         {
279                 .name  = "cfi_probe",
280                 .start = 0x20000000,
281                 .end   = 0x201fffff,
282                 .flags = IORESOURCE_MEM,
283         }, {
284                 .start = (unsigned long)cm_flash_gpios,
285                 .end   = ARRAY_SIZE(cm_flash_gpios),
286                 .flags = IORESOURCE_IRQ,
287         }
288 };
289
290 static struct platform_device cm_flash_device = {
291         .name          = "gpio-addr-flash",
292         .id            = 0,
293         .dev = {
294                 .platform_data = &cm_flash_data,
295         },
296         .num_resources = ARRAY_SIZE(cm_flash_resource),
297         .resource      = cm_flash_resource,
298 };
299 #endif
300
301 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
302 #ifdef CONFIG_SERIAL_BFIN_UART0
303 static struct resource bfin_uart0_resources[] = {
304         {
305                 .start = UART0_THR,
306                 .end = UART0_GCTL+2,
307                 .flags = IORESOURCE_MEM,
308         },
309         {
310                 .start = IRQ_UART0_TX,
311                 .end = IRQ_UART0_TX,
312                 .flags = IORESOURCE_IRQ,
313         },
314         {
315                 .start = IRQ_UART0_RX,
316                 .end = IRQ_UART0_RX,
317                 .flags = IORESOURCE_IRQ,
318         },
319         {
320                 .start = IRQ_UART0_ERROR,
321                 .end = IRQ_UART0_ERROR,
322                 .flags = IORESOURCE_IRQ,
323         },
324         {
325                 .start = CH_UART0_TX,
326                 .end = CH_UART0_TX,
327                 .flags = IORESOURCE_DMA,
328         },
329         {
330                 .start = CH_UART0_RX,
331                 .end = CH_UART0_RX,
332                 .flags = IORESOURCE_DMA,
333         },
334 };
335
336 static unsigned short bfin_uart0_peripherals[] = {
337         P_UART0_TX, P_UART0_RX, 0
338 };
339
340 static struct platform_device bfin_uart0_device = {
341         .name = "bfin-uart",
342         .id = 0,
343         .num_resources = ARRAY_SIZE(bfin_uart0_resources),
344         .resource = bfin_uart0_resources,
345         .dev = {
346                 .platform_data = &bfin_uart0_peripherals, /* Passed to driver */
347         },
348 };
349 #endif
350 #ifdef CONFIG_SERIAL_BFIN_UART1
351 static struct resource bfin_uart1_resources[] = {
352         {
353                 .start = UART1_THR,
354                 .end = UART1_GCTL+2,
355                 .flags = IORESOURCE_MEM,
356         },
357         {
358                 .start = IRQ_UART1_TX,
359                 .end = IRQ_UART1_TX,
360                 .flags = IORESOURCE_IRQ,
361         },
362         {
363                 .start = IRQ_UART1_RX,
364                 .end = IRQ_UART1_RX,
365                 .flags = IORESOURCE_IRQ,
366         },
367         {
368                 .start = IRQ_UART1_ERROR,
369                 .end = IRQ_UART1_ERROR,
370                 .flags = IORESOURCE_IRQ,
371         },
372         {
373                 .start = CH_UART1_TX,
374                 .end = CH_UART1_TX,
375                 .flags = IORESOURCE_DMA,
376         },
377         {
378                 .start = CH_UART1_RX,
379                 .end = CH_UART1_RX,
380                 .flags = IORESOURCE_DMA,
381         },
382 };
383
384 static unsigned short bfin_uart1_peripherals[] = {
385         P_UART1_TX, P_UART1_RX, 0
386 };
387
388 static struct platform_device bfin_uart1_device = {
389         .name = "bfin-uart",
390         .id = 1,
391         .num_resources = ARRAY_SIZE(bfin_uart1_resources),
392         .resource = bfin_uart1_resources,
393         .dev = {
394                 .platform_data = &bfin_uart1_peripherals, /* Passed to driver */
395         },
396 };
397 #endif
398 #endif
399
400 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
401 #ifdef CONFIG_BFIN_SIR0
402 static struct resource bfin_sir0_resources[] = {
403         {
404                 .start = 0xFFC00400,
405                 .end = 0xFFC004FF,
406                 .flags = IORESOURCE_MEM,
407         },
408         {
409                 .start = IRQ_UART0_RX,
410                 .end = IRQ_UART0_RX+1,
411                 .flags = IORESOURCE_IRQ,
412         },
413         {
414                 .start = CH_UART0_RX,
415                 .end = CH_UART0_RX+1,
416                 .flags = IORESOURCE_DMA,
417         },
418 };
419
420 static struct platform_device bfin_sir0_device = {
421         .name = "bfin_sir",
422         .id = 0,
423         .num_resources = ARRAY_SIZE(bfin_sir0_resources),
424         .resource = bfin_sir0_resources,
425 };
426 #endif
427 #ifdef CONFIG_BFIN_SIR1
428 static struct resource bfin_sir1_resources[] = {
429         {
430                 .start = 0xFFC02000,
431                 .end = 0xFFC020FF,
432                 .flags = IORESOURCE_MEM,
433         },
434         {
435                 .start = IRQ_UART1_RX,
436                 .end = IRQ_UART1_RX+1,
437                 .flags = IORESOURCE_IRQ,
438         },
439         {
440                 .start = CH_UART1_RX,
441                 .end = CH_UART1_RX+1,
442                 .flags = IORESOURCE_DMA,
443         },
444 };
445
446 static struct platform_device bfin_sir1_device = {
447         .name = "bfin_sir",
448         .id = 1,
449         .num_resources = ARRAY_SIZE(bfin_sir1_resources),
450         .resource = bfin_sir1_resources,
451 };
452 #endif
453 #endif
454
455 #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
456 static struct resource bfin_twi0_resource[] = {
457         [0] = {
458                 .start = TWI0_REGBASE,
459                 .end   = TWI0_REGBASE,
460                 .flags = IORESOURCE_MEM,
461         },
462         [1] = {
463                 .start = IRQ_TWI,
464                 .end   = IRQ_TWI,
465                 .flags = IORESOURCE_IRQ,
466         },
467 };
468
469 static struct platform_device i2c_bfin_twi_device = {
470         .name = "i2c-bfin-twi",
471         .id = 0,
472         .num_resources = ARRAY_SIZE(bfin_twi0_resource),
473         .resource = bfin_twi0_resource,
474 };
475 #endif
476
477 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
478 #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
479 static struct resource bfin_sport0_uart_resources[] = {
480         {
481                 .start = SPORT0_TCR1,
482                 .end = SPORT0_MRCS3+4,
483                 .flags = IORESOURCE_MEM,
484         },
485         {
486                 .start = IRQ_SPORT0_RX,
487                 .end = IRQ_SPORT0_RX+1,
488                 .flags = IORESOURCE_IRQ,
489         },
490         {
491                 .start = IRQ_SPORT0_ERROR,
492                 .end = IRQ_SPORT0_ERROR,
493                 .flags = IORESOURCE_IRQ,
494         },
495 };
496
497 static unsigned short bfin_sport0_peripherals[] = {
498         P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
499         P_SPORT0_DRPRI, P_SPORT0_RSCLK, 0
500 };
501
502 static struct platform_device bfin_sport0_uart_device = {
503         .name = "bfin-sport-uart",
504         .id = 0,
505         .num_resources = ARRAY_SIZE(bfin_sport0_uart_resources),
506         .resource = bfin_sport0_uart_resources,
507         .dev = {
508                 .platform_data = &bfin_sport0_peripherals, /* Passed to driver */
509         },
510 };
511 #endif
512 #ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
513 static struct resource bfin_sport1_uart_resources[] = {
514         {
515                 .start = SPORT1_TCR1,
516                 .end = SPORT1_MRCS3+4,
517                 .flags = IORESOURCE_MEM,
518         },
519         {
520                 .start = IRQ_SPORT1_RX,
521                 .end = IRQ_SPORT1_RX+1,
522                 .flags = IORESOURCE_IRQ,
523         },
524         {
525                 .start = IRQ_SPORT1_ERROR,
526                 .end = IRQ_SPORT1_ERROR,
527                 .flags = IORESOURCE_IRQ,
528         },
529 };
530
531 static unsigned short bfin_sport1_peripherals[] = {
532         P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
533         P_SPORT1_DRPRI, P_SPORT1_RSCLK, 0
534 };
535
536 static struct platform_device bfin_sport1_uart_device = {
537         .name = "bfin-sport-uart",
538         .id = 1,
539         .num_resources = ARRAY_SIZE(bfin_sport1_uart_resources),
540         .resource = bfin_sport1_uart_resources,
541         .dev = {
542                 .platform_data = &bfin_sport1_peripherals, /* Passed to driver */
543         },
544 };
545 #endif
546 #endif
547
548 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
549 #include <linux/bfin_mac.h>
550 static const unsigned short bfin_mac_peripherals[] = P_MII0;
551
552 static struct bfin_phydev_platform_data bfin_phydev_data[] = {
553         {
554                 .addr = 1,
555                 .irq = IRQ_MAC_PHYINT,
556         },
557 };
558
559 static struct bfin_mii_bus_platform_data bfin_mii_bus_data = {
560         .phydev_number = 1,
561         .phydev_data = bfin_phydev_data,
562         .phy_mode = PHY_INTERFACE_MODE_MII,
563         .mac_peripherals = bfin_mac_peripherals,
564 };
565
566 static struct platform_device bfin_mii_bus = {
567         .name = "bfin_mii_bus",
568         .dev = {
569                 .platform_data = &bfin_mii_bus_data,
570         }
571 };
572
573 static struct platform_device bfin_mac_device = {
574         .name = "bfin_mac",
575         .dev = {
576                 .platform_data = &bfin_mii_bus,
577         }
578 };
579 #endif
580
581 #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
582 #define PATA_INT        IRQ_PF14
583
584 static struct pata_platform_info bfin_pata_platform_data = {
585         .ioport_shift = 2,
586         .irq_type = IRQF_TRIGGER_HIGH,
587 };
588
589 static struct resource bfin_pata_resources[] = {
590         {
591                 .start = 0x2030C000,
592                 .end = 0x2030C01F,
593                 .flags = IORESOURCE_MEM,
594         },
595         {
596                 .start = 0x2030D018,
597                 .end = 0x2030D01B,
598                 .flags = IORESOURCE_MEM,
599         },
600         {
601                 .start = PATA_INT,
602                 .end = PATA_INT,
603                 .flags = IORESOURCE_IRQ,
604         },
605 };
606
607 static struct platform_device bfin_pata_device = {
608         .name = "pata_platform",
609         .id = -1,
610         .num_resources = ARRAY_SIZE(bfin_pata_resources),
611         .resource = bfin_pata_resources,
612         .dev = {
613                 .platform_data = &bfin_pata_platform_data,
614         }
615 };
616 #endif
617
618 static const unsigned int cclk_vlev_datasheet[] =
619 {
620         VRPAIR(VLEV_085, 250000000),
621         VRPAIR(VLEV_090, 376000000),
622         VRPAIR(VLEV_095, 426000000),
623         VRPAIR(VLEV_100, 426000000),
624         VRPAIR(VLEV_105, 476000000),
625         VRPAIR(VLEV_110, 476000000),
626         VRPAIR(VLEV_115, 476000000),
627         VRPAIR(VLEV_120, 500000000),
628         VRPAIR(VLEV_125, 533000000),
629         VRPAIR(VLEV_130, 600000000),
630 };
631
632 static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
633         .tuple_tab = cclk_vlev_datasheet,
634         .tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
635         .vr_settling_time = 25 /* us */,
636 };
637
638 static struct platform_device bfin_dpmc = {
639         .name = "bfin dpmc",
640         .dev = {
641                 .platform_data = &bfin_dmpc_vreg_data,
642         },
643 };
644
645 static struct platform_device *cm_bf537_devices[] __initdata = {
646
647         &bfin_dpmc,
648
649 #if defined(CONFIG_FB_HITACHI_TX09) || defined(CONFIG_FB_HITACHI_TX09_MODULE)
650         &hitachi_fb_device,
651 #endif
652
653 #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
654         &rtc_device,
655 #endif
656
657 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
658 #ifdef CONFIG_SERIAL_BFIN_UART0
659         &bfin_uart0_device,
660 #endif
661 #ifdef CONFIG_SERIAL_BFIN_UART1
662         &bfin_uart1_device,
663 #endif
664 #endif
665
666 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
667 #ifdef CONFIG_BFIN_SIR0
668         &bfin_sir0_device,
669 #endif
670 #ifdef CONFIG_BFIN_SIR1
671         &bfin_sir1_device,
672 #endif
673 #endif
674
675 #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
676         &i2c_bfin_twi_device,
677 #endif
678
679 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
680 #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
681         &bfin_sport0_uart_device,
682 #endif
683 #ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
684         &bfin_sport1_uart_device,
685 #endif
686 #endif
687
688 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
689         &isp1362_hcd_device,
690 #endif
691
692 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
693         &smc91x_device,
694 #endif
695
696 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
697         &bfin_mii_bus,
698         &bfin_mac_device,
699 #endif
700
701 #if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
702         &net2272_bfin_device,
703 #endif
704
705 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
706         &bfin_spi0_device,
707 #endif
708
709 #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
710         &bfin_pata_device,
711 #endif
712
713 #if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE)
714         &cm_flash_device,
715 #endif
716 };
717
718 static int __init net2272_init(void)
719 {
720 #if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
721         int ret;
722
723         ret = gpio_request(GPIO_PG14, "net2272");
724         if (ret)
725                 return ret;
726
727         /* Reset USB Chip, PG14 */
728         gpio_direction_output(GPIO_PG14, 0);
729         mdelay(2);
730         gpio_set_value(GPIO_PG14, 1);
731 #endif
732
733         return 0;
734 }
735
736 static int __init tcm_bf537_init(void)
737 {
738         printk(KERN_INFO "%s(): registering device resources\n", __func__);
739         platform_add_devices(cm_bf537_devices, ARRAY_SIZE(cm_bf537_devices));
740 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
741         spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
742 #endif
743
744 #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
745         irq_set_status_flags(PATA_INT, IRQ_NOAUTOEN);
746 #endif
747
748         if (net2272_init())
749                 pr_warning("unable to configure net2272; it probably won't work\n");
750
751         return 0;
752 }
753
754 arch_initcall(tcm_bf537_init);
755
756 static struct platform_device *cm_bf537_early_devices[] __initdata = {
757 #if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
758 #ifdef CONFIG_SERIAL_BFIN_UART0
759         &bfin_uart0_device,
760 #endif
761 #ifdef CONFIG_SERIAL_BFIN_UART1
762         &bfin_uart1_device,
763 #endif
764 #endif
765
766 #if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE)
767 #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
768         &bfin_sport0_uart_device,
769 #endif
770 #ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
771         &bfin_sport1_uart_device,
772 #endif
773 #endif
774 };
775
776 void __init native_machine_early_platform_add_devices(void)
777 {
778         printk(KERN_INFO "register early platform devices\n");
779         early_platform_add_devices(cm_bf537_early_devices,
780                 ARRAY_SIZE(cm_bf537_early_devices));
781 }
782
783 void bfin_get_ether_addr(char *addr)
784 {
785         random_ether_addr(addr);
786         printk(KERN_WARNING "%s:%s: Setting Ethernet MAC to a random one\n", __FILE__, __func__);
787 }
788 EXPORT_SYMBOL(bfin_get_ether_addr);