arch/blackfin/mach-bf533/boards/cm_bf533.c

   1 /*
   2  * File:         arch/blackfin/mach-bf533/boards/cm_bf533.c
   3  * Based on:     arch/blackfin/mach-bf533/boards/ezkit.c
   4  * Author:       Aidan Williams <aidan@nicta.com.au> Copyright 2005
   5  *
   6  * Created:      2005
   7  * Description:  Board description file
   8  *
   9  * Modified:
  10  *               Copyright 2004-2006 Analog Devices Inc.
  11  *
  12  * Bugs:         Enter bugs at http://blackfin.uclinux.org/
  13  *
  14  * This program is free software; you can redistribute it and/or modify
  15  * it under the terms of the GNU General Public License as published by
  16  * the Free Software Foundation; either version 2 of the License, or
  17  * (at your option) any later version.
  18  *
  19  * This program is distributed in the hope that it will be useful,
  20  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  21  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  22  * GNU General Public License for more details.
  23  *
  24  * You should have received a copy of the GNU General Public License
  25  * along with this program; if not, see the file COPYING, or write
  26  * to the Free Software Foundation, Inc.,
  27  * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  28  */
  29
  30 #include <linux/device.h>
  31 #include <linux/platform_device.h>
  32 #include <linux/mtd/mtd.h>
  33 #include <linux/mtd/partitions.h>
  34 #include <linux/spi/spi.h>
  35 #include <linux/spi/flash.h>
  36 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
  37 #include <linux/usb/isp1362.h>
  38 #endif
  39 #include <linux/irq.h>
  40 #include <asm/dma.h>
  41 #include <asm/bfin5xx_spi.h>
  42 #include <asm/portmux.h>
  43 #include <asm/dpmc.h>
  44
  45 /*
  46  * Name the Board for the /proc/cpuinfo
  47  */
  48 const char bfin_board_name[] = "Bluetechnix CM BF533";
  49
  50 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
  51 /* all SPI peripherals info goes here */
  52 #if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
  53 static struct mtd_partition bfin_spi_flash_partitions[] = {
  54         {
  55                 .name = "bootloader(spi)",
  56                 .size = 0x00020000,
  57                 .offset = 0,
  58                 .mask_flags = MTD_CAP_ROM
  59         }, {
  60                 .name = "linux kernel(spi)",
  61                 .size = 0xe0000,
  62                 .offset = 0x20000
  63         }, {
  64                 .name = "file system(spi)",
  65                 .size = 0x700000,
  66                 .offset = 0x00100000,
  67         }
  68 };
  69
  70 static struct flash_platform_data bfin_spi_flash_data = {
  71         .name = "m25p80",
  72         .parts = bfin_spi_flash_partitions,
  73         .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
  74         .type = "m25p64",
  75 };
  76
  77 /* SPI flash chip (m25p64) */
  78 static struct bfin5xx_spi_chip spi_flash_chip_info = {
  79         .enable_dma = 0,         /* use dma transfer with this chip*/
  80         .bits_per_word = 8,
  81 };
  82 #endif
  83
  84 /* SPI ADC chip */
  85 #if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
  86 static struct bfin5xx_spi_chip spi_adc_chip_info = {
  87         .enable_dma = 1,         /* use dma transfer with this chip*/
  88         .bits_per_word = 16,
  89 };
  90 #endif
  91
  92 #if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
  93 static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
  94         .enable_dma = 0,
  95         .bits_per_word = 16,
  96 };
  97 #endif
  98
  99 #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
 100 static struct bfin5xx_spi_chip mmc_spi_chip_info = {
 101         .enable_dma = 0,
 102         .bits_per_word = 8,
 103 };
 104 #endif
 105
 106 static struct spi_board_info bfin_spi_board_info[] __initdata = {
 107 #if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
 108         {
 109                 /* the modalias must be the same as spi device driver name */
 110                 .modalias = "m25p80",       /* Name of spi_driver for this device */
 111                 .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
 112                 .bus_num = 0,               /* Framework bus number */
 113                 .chip_select = 1,           /* Framework chip select. On STAMP537 it is SPISSEL1*/
 114                 .platform_data = &bfin_spi_flash_data,
 115                 .controller_data = &spi_flash_chip_info,
 116                 .mode = SPI_MODE_3,
 117         },
 118 #endif
 119
 120 #if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
 121         {
 122                 .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
 123                 .max_speed_hz = 6250000,     /* max spi clock (SCK) speed in HZ */
 124                 .bus_num = 0,               /* Framework bus number */
 125                 .chip_select = 2,           /* Framework chip select. */
 126                 .platform_data = NULL,      /* No spi_driver specific config */
 127                 .controller_data = &spi_adc_chip_info,
 128         },
 129 #endif
 130
 131 #if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
 132         {
 133                 .modalias = "ad1836-spi",
 134                 .max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
 135                 .bus_num = 0,
 136                 .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
 137                 .controller_data = &ad1836_spi_chip_info,
 138         },
 139 #endif
 140
 141 #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
 142         {
 143                 .modalias = "mmc_spi",
 144                 .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
 145                 .bus_num = 0,
 146                 .chip_select = 5,
 147                 .controller_data = &mmc_spi_chip_info,
 148                 .mode = SPI_MODE_3,
 149         },
 150 #endif
 151 };
 152
 153 /* SPI (0) */
 154 static struct resource bfin_spi0_resource[] = {
 155         [0] = {
 156                 .start = SPI0_REGBASE,
 157                 .end   = SPI0_REGBASE + 0xFF,
 158                 .flags = IORESOURCE_MEM,
 159         },
 160         [1] = {
 161                 .start = CH_SPI,
 162                 .end   = CH_SPI,
 163                 .flags = IORESOURCE_IRQ,
 164         }
 165 };
 166
 167 /* SPI controller data */
 168 static struct bfin5xx_spi_master bfin_spi0_info = {
 169         .num_chipselect = 8,
 170         .enable_dma = 1,  /* master has the ability to do dma transfer */
 171         .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
 172 };
 173
 174 static struct platform_device bfin_spi0_device = {
 175         .name = "bfin-spi",
 176         .id = 0, /* Bus number */
 177         .num_resources = ARRAY_SIZE(bfin_spi0_resource),
 178         .resource = bfin_spi0_resource,
 179         .dev = {
 180                 .platform_data = &bfin_spi0_info, /* Passed to driver */
 181         },
 182 };
 183 #endif  /* spi master and devices */
 184
 185 #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
 186 static struct platform_device rtc_device = {
 187         .name = "rtc-bfin",
 188         .id   = -1,
 189 };
 190 #endif
 191
 192 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
 193 static struct resource smc91x_resources[] = {
 194         {
 195                 .start = 0x20200300,
 196                 .end = 0x20200300 + 16,
 197                 .flags = IORESOURCE_MEM,
 198         }, {
 199                 .start = IRQ_PF0,
 200                 .end = IRQ_PF0,
 201                 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
 202         },
 203 };
 204 static struct platform_device smc91x_device = {
 205         .name = "smc91x",
 206         .id = 0,
 207         .num_resources = ARRAY_SIZE(smc91x_resources),
 208         .resource = smc91x_resources,
 209 };
 210 #endif
 211
 212 static struct resource bfin_gpios_resources = {
 213         .start = 0,
 214         .end   = MAX_BLACKFIN_GPIOS - 1,
 215         .flags = IORESOURCE_IRQ,
 216 };
 217
 218 static struct platform_device bfin_gpios_device = {
 219         .name = "simple-gpio",
 220         .id = -1,
 221         .num_resources = 1,
 222         .resource = &bfin_gpios_resources,
 223 };
 224
 225 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
 226 static struct resource bfin_uart_resources[] = {
 227         {
 228                 .start = 0xFFC00400,
 229                 .end = 0xFFC004FF,
 230                 .flags = IORESOURCE_MEM,
 231         },
 232 };
 233
 234 static struct platform_device bfin_uart_device = {
 235         .name = "bfin-uart",
 236         .id = 1,
 237         .num_resources = ARRAY_SIZE(bfin_uart_resources),
 238         .resource = bfin_uart_resources,
 239 };
 240 #endif
 241
 242 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
 243 #ifdef CONFIG_BFIN_SIR0
 244 static struct resource bfin_sir0_resources[] = {
 245         {
 246                 .start = 0xFFC00400,
 247                 .end = 0xFFC004FF,
 248                 .flags = IORESOURCE_MEM,
 249         },
 250         {
 251                 .start = IRQ_UART0_RX,
 252                 .end = IRQ_UART0_RX+1,
 253                 .flags = IORESOURCE_IRQ,
 254         },
 255         {
 256                 .start = CH_UART0_RX,
 257                 .end = CH_UART0_RX+1,
 258                 .flags = IORESOURCE_DMA,
 259         },
 260 };
 261
 262 static struct platform_device bfin_sir0_device = {
 263         .name = "bfin_sir",
 264         .id = 0,
 265         .num_resources = ARRAY_SIZE(bfin_sir0_resources),
 266         .resource = bfin_sir0_resources,
 267 };
 268 #endif
 269 #endif
 270
 271 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
 272 static struct platform_device bfin_sport0_uart_device = {
 273         .name = "bfin-sport-uart",
 274         .id = 0,
 275 };
 276
 277 static struct platform_device bfin_sport1_uart_device = {
 278         .name = "bfin-sport-uart",
 279         .id = 1,
 280 };
 281 #endif
 282
 283 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
 284 static struct resource isp1362_hcd_resources[] = {
 285         {
 286                 .start = 0x20308000,
 287                 .end = 0x20308000,
 288                 .flags = IORESOURCE_MEM,
 289         }, {
 290                 .start = 0x20308004,
 291                 .end = 0x20308004,
 292                 .flags = IORESOURCE_MEM,
 293         }, {
 294                 .start = IRQ_PF4,
 295                 .end = IRQ_PF4,
 296                 .flags = IORESOURCE_IRQ,
 297         },
 298 };
 299
 300 static struct isp1362_platform_data isp1362_priv = {
 301         .sel15Kres = 1,
 302         .clknotstop = 0,
 303         .oc_enable = 0,
 304         .int_act_high = 0,
 305         .int_edge_triggered = 0,
 306         .remote_wakeup_connected = 0,
 307         .no_power_switching = 1,
 308         .power_switching_mode = 0,
 309 };
 310
 311 static struct platform_device isp1362_hcd_device = {
 312         .name = "isp1362-hcd",
 313         .id = 0,
 314         .dev = {
 315                 .platform_data = &isp1362_priv,
 316         },
 317         .num_resources = ARRAY_SIZE(isp1362_hcd_resources),
 318         .resource = isp1362_hcd_resources,
 319 };
 320 #endif
 321
 322 static const unsigned int cclk_vlev_datasheet[] =
 323 {
 324         VRPAIR(VLEV_085, 250000000),
 325         VRPAIR(VLEV_090, 376000000),
 326         VRPAIR(VLEV_095, 426000000),
 327         VRPAIR(VLEV_100, 426000000),
 328         VRPAIR(VLEV_105, 476000000),
 329         VRPAIR(VLEV_110, 476000000),
 330         VRPAIR(VLEV_115, 476000000),
 331         VRPAIR(VLEV_120, 600000000),
 332         VRPAIR(VLEV_125, 600000000),
 333         VRPAIR(VLEV_130, 600000000),
 334 };
 335
 336 static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
 337         .tuple_tab = cclk_vlev_datasheet,
 338         .tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
 339         .vr_settling_time = 25 /* us */,
 340 };
 341
 342 static struct platform_device bfin_dpmc = {
 343         .name = "bfin dpmc",
 344         .dev = {
 345                 .platform_data = &bfin_dmpc_vreg_data,
 346         },
 347 };
 348
 349 static struct platform_device *cm_bf533_devices[] __initdata = {
 350
 351         &bfin_dpmc,
 352
 353 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
 354         &bfin_uart_device,
 355 #endif
 356
 357 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
 358 #ifdef CONFIG_BFIN_SIR0
 359         &bfin_sir0_device,
 360 #endif
 361 #endif
 362
 363 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
 364         &bfin_sport0_uart_device,
 365         &bfin_sport1_uart_device,
 366 #endif
 367
 368 #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
 369         &rtc_device,
 370 #endif
 371
 372 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
 373         &isp1362_hcd_device,
 374 #endif
 375
 376 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
 377         &smc91x_device,
 378 #endif
 379
 380 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
 381         &bfin_spi0_device,
 382 #endif
 383
 384         &bfin_gpios_device,
 385 };
 386
 387 static int __init cm_bf533_init(void)
 388 {
 389         printk(KERN_INFO "%s(): registering device resources\n", __func__);
 390         platform_add_devices(cm_bf533_devices, ARRAY_SIZE(cm_bf533_devices));
 391 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
 392         spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
 393 #endif
 394         return 0;
 395 }
 396
 397 arch_initcall(cm_bf533_init);