arch/blackfin/mach-bf527/boards/ezkit.c

   1 /*
   2  * Copyright 2004-2009 Analog Devices Inc.
   3  *                2005 National ICT Australia (NICTA)
   4  *                      Aidan Williams <aidan@nicta.com.au>
   5  *
   6  * Licensed under the GPL-2 or later.
   7  */
   8
   9 #include <linux/device.h>
  10 #include <linux/export.h>
  11 #include <linux/platform_device.h>
  12 #include <linux/mtd/mtd.h>
  13 #include <linux/mtd/partitions.h>
  14 #include <linux/mtd/physmap.h>
  15 #include <linux/spi/spi.h>
  16 #include <linux/spi/flash.h>
  17 #include <linux/i2c.h>
  18 #include <linux/irq.h>
  19 #include <linux/interrupt.h>
  20 #include <linux/usb/musb.h>
  21 #include <linux/leds.h>
  22 #include <linux/input.h>
  23 #include <asm/dma.h>
  24 #include <asm/bfin5xx_spi.h>
  25 #include <asm/reboot.h>
  26 #include <asm/nand.h>
  27 #include <asm/portmux.h>
  28 #include <asm/dpmc.h>
  29 #include <linux/spi/ad7877.h>
  30 #include <asm/bfin_sport.h>
  31
  32 /*
  33  * Name the Board for the /proc/cpuinfo
  34  */
  35 #ifdef CONFIG_BFIN527_EZKIT_V2
  36 const char bfin_board_name[] = "ADI BF527-EZKIT V2";
  37 #else
  38 const char bfin_board_name[] = "ADI BF527-EZKIT";
  39 #endif
  40
  41 /*
  42  *  Driver needs to know address, irq and flag pin.
  43  */
  44
  45 #if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
  46 #include <linux/usb/isp1760.h>
  47 static struct resource bfin_isp1760_resources[] = {
  48         [0] = {
  49                 .start  = 0x203C0000,
  50                 .end    = 0x203C0000 + 0x000fffff,
  51                 .flags  = IORESOURCE_MEM,
  52         },
  53         [1] = {
  54                 .start  = IRQ_PF7,
  55                 .end    = IRQ_PF7,
  56                 .flags  = IORESOURCE_IRQ,
  57         },
  58 };
  59
  60 static struct isp1760_platform_data isp1760_priv = {
  61         .is_isp1761 = 0,
  62         .bus_width_16 = 1,
  63         .port1_otg = 0,
  64         .analog_oc = 0,
  65         .dack_polarity_high = 0,
  66         .dreq_polarity_high = 0,
  67 };
  68
  69 static struct platform_device bfin_isp1760_device = {
  70         .name           = "isp1760",
  71         .id             = 0,
  72         .dev = {
  73                 .platform_data = &isp1760_priv,
  74         },
  75         .num_resources  = ARRAY_SIZE(bfin_isp1760_resources),
  76         .resource       = bfin_isp1760_resources,
  77 };
  78 #endif
  79
  80 #if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
  81 static struct resource musb_resources[] = {
  82         [0] = {
  83                 .start  = 0xffc03800,
  84                 .end    = 0xffc03cff,
  85                 .flags  = IORESOURCE_MEM,
  86         },
  87         [1] = { /* general IRQ */
  88                 .start  = IRQ_USB_INT0,
  89                 .end    = IRQ_USB_INT0,
  90                 .flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
  91                 .name   = "mc"
  92         },
  93         [2] = { /* DMA IRQ */
  94                 .start  = IRQ_USB_DMA,
  95                 .end    = IRQ_USB_DMA,
  96                 .flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
  97                 .name   = "dma"
  98         },
  99 };
 100
 101 static struct musb_hdrc_config musb_config = {
 102         .multipoint     = 0,
 103         .dyn_fifo       = 0,
 104         .soft_con       = 1,
 105         .dma            = 1,
 106         .num_eps        = 8,
 107         .dma_channels   = 8,
 108         .gpio_vrsel     = GPIO_PG13,
 109         /* Some custom boards need to be active low, just set it to "0"
 110          * if it is the case.
 111          */
 112         .gpio_vrsel_active      = 1,
 113         .clkin          = 24,           /* musb CLKIN in MHZ */
 114 };
 115
 116 static struct musb_hdrc_platform_data musb_plat = {
 117 #if defined(CONFIG_USB_MUSB_OTG)
 118         .mode           = MUSB_OTG,
 119 #elif defined(CONFIG_USB_MUSB_HDRC_HCD)
 120         .mode           = MUSB_HOST,
 121 #elif defined(CONFIG_USB_GADGET_MUSB_HDRC)
 122         .mode           = MUSB_PERIPHERAL,
 123 #endif
 124         .config         = &musb_config,
 125 };
 126
 127 static u64 musb_dmamask = ~(u32)0;
 128
 129 static struct platform_device musb_device = {
 130         .name           = "musb-blackfin",
 131         .id             = 0,
 132         .dev = {
 133                 .dma_mask               = &musb_dmamask,
 134                 .coherent_dma_mask      = 0xffffffff,
 135                 .platform_data          = &musb_plat,
 136         },
 137         .num_resources  = ARRAY_SIZE(musb_resources),
 138         .resource       = musb_resources,
 139 };
 140 #endif
 141
 142 #if defined(CONFIG_FB_BFIN_T350MCQB) || defined(CONFIG_FB_BFIN_T350MCQB_MODULE)
 143
 144 static struct resource bf52x_t350mcqb_resources[] = {
 145         {
 146                 .start = IRQ_PPI_ERROR,
 147                 .end = IRQ_PPI_ERROR,
 148                 .flags = IORESOURCE_IRQ,
 149         },
 150 };
 151
 152 static struct platform_device bf52x_t350mcqb_device = {
 153         .name           = "bfin-t350mcqb",
 154         .id             = -1,
 155         .num_resources  = ARRAY_SIZE(bf52x_t350mcqb_resources),
 156         .resource       = bf52x_t350mcqb_resources,
 157 };
 158 #endif
 159
 160 #if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
 161 #include <asm/bfin-lq035q1.h>
 162
 163 static struct bfin_lq035q1fb_disp_info bfin_lq035q1_data = {
 164         .mode = LQ035_NORM | LQ035_RGB | LQ035_RL | LQ035_TB,
 165         .ppi_mode = USE_RGB565_8_BIT_PPI,
 166 };
 167
 168 static struct resource bfin_lq035q1_resources[] = {
 169         {
 170                 .start = IRQ_PPI_ERROR,
 171                 .end = IRQ_PPI_ERROR,
 172                 .flags = IORESOURCE_IRQ,
 173         },
 174 };
 175
 176 static struct platform_device bfin_lq035q1_device = {
 177         .name           = "bfin-lq035q1",
 178         .id             = -1,
 179         .num_resources  = ARRAY_SIZE(bfin_lq035q1_resources),
 180         .resource       = bfin_lq035q1_resources,
 181         .dev            = {
 182                 .platform_data = &bfin_lq035q1_data,
 183         },
 184 };
 185 #endif
 186
 187 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
 188 static struct mtd_partition ezkit_partitions[] = {
 189         {
 190                 .name       = "bootloader(nor)",
 191                 .size       = 0x40000,
 192                 .offset     = 0,
 193         }, {
 194                 .name       = "linux kernel(nor)",
 195                 .size       = 0x1C0000,
 196                 .offset     = MTDPART_OFS_APPEND,
 197         }, {
 198                 .name       = "file system(nor)",
 199                 .size       = MTDPART_SIZ_FULL,
 200                 .offset     = MTDPART_OFS_APPEND,
 201         }
 202 };
 203
 204 static struct physmap_flash_data ezkit_flash_data = {
 205         .width      = 2,
 206         .parts      = ezkit_partitions,
 207         .nr_parts   = ARRAY_SIZE(ezkit_partitions),
 208 };
 209
 210 static struct resource ezkit_flash_resource = {
 211         .start = 0x20000000,
 212         .end   = 0x203fffff,
 213         .flags = IORESOURCE_MEM,
 214 };
 215
 216 static struct platform_device ezkit_flash_device = {
 217         .name          = "physmap-flash",
 218         .id            = 0,
 219         .dev = {
 220                 .platform_data = &ezkit_flash_data,
 221         },
 222         .num_resources = 1,
 223         .resource      = &ezkit_flash_resource,
 224 };
 225 #endif
 226
 227 #if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
 228 static struct mtd_partition partition_info[] = {
 229         {
 230                 .name = "bootloader(nand)",
 231                 .offset = 0,
 232                 .size = 0x40000,
 233         }, {
 234                 .name = "linux kernel(nand)",
 235                 .offset = MTDPART_OFS_APPEND,
 236                 .size = 4 * 1024 * 1024,
 237         },
 238         {
 239                 .name = "file system(nand)",
 240                 .offset = MTDPART_OFS_APPEND,
 241                 .size = MTDPART_SIZ_FULL,
 242         },
 243 };
 244
 245 static struct bf5xx_nand_platform bf5xx_nand_platform = {
 246         .data_width = NFC_NWIDTH_8,
 247         .partitions = partition_info,
 248         .nr_partitions = ARRAY_SIZE(partition_info),
 249         .rd_dly = 3,
 250         .wr_dly = 3,
 251 };
 252
 253 static struct resource bf5xx_nand_resources[] = {
 254         {
 255                 .start = NFC_CTL,
 256                 .end = NFC_DATA_RD + 2,
 257                 .flags = IORESOURCE_MEM,
 258         },
 259         {
 260                 .start = CH_NFC,
 261                 .end = CH_NFC,
 262                 .flags = IORESOURCE_IRQ,
 263         },
 264 };
 265
 266 static struct platform_device bf5xx_nand_device = {
 267         .name = "bf5xx-nand",
 268         .id = 0,
 269         .num_resources = ARRAY_SIZE(bf5xx_nand_resources),
 270         .resource = bf5xx_nand_resources,
 271         .dev = {
 272                 .platform_data = &bf5xx_nand_platform,
 273         },
 274 };
 275 #endif
 276
 277 #if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
 278 static struct resource bfin_pcmcia_cf_resources[] = {
 279         {
 280                 .start = 0x20310000, /* IO PORT */
 281                 .end = 0x20312000,
 282                 .flags = IORESOURCE_MEM,
 283         }, {
 284                 .start = 0x20311000, /* Attribute Memory */
 285                 .end = 0x20311FFF,
 286                 .flags = IORESOURCE_MEM,
 287         }, {
 288                 .start = IRQ_PF4,
 289                 .end = IRQ_PF4,
 290                 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
 291         }, {
 292                 .start = 6, /* Card Detect PF6 */
 293                 .end = 6,
 294                 .flags = IORESOURCE_IRQ,
 295         },
 296 };
 297
 298 static struct platform_device bfin_pcmcia_cf_device = {
 299         .name = "bfin_cf_pcmcia",
 300         .id = -1,
 301         .num_resources = ARRAY_SIZE(bfin_pcmcia_cf_resources),
 302         .resource = bfin_pcmcia_cf_resources,
 303 };
 304 #endif
 305
 306 #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
 307 static struct platform_device rtc_device = {
 308         .name = "rtc-bfin",
 309         .id   = -1,
 310 };
 311 #endif
 312
 313 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
 314 #include <linux/smc91x.h>
 315
 316 static struct smc91x_platdata smc91x_info = {
 317         .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
 318         .leda = RPC_LED_100_10,
 319         .ledb = RPC_LED_TX_RX,
 320 };
 321
 322 static struct resource smc91x_resources[] = {
 323         {
 324                 .name = "smc91x-regs",
 325                 .start = 0x20300300,
 326                 .end = 0x20300300 + 16,
 327                 .flags = IORESOURCE_MEM,
 328         }, {
 329
 330                 .start = IRQ_PF7,
 331                 .end = IRQ_PF7,
 332                 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
 333         },
 334 };
 335 static struct platform_device smc91x_device = {
 336         .name = "smc91x",
 337         .id = 0,
 338         .num_resources = ARRAY_SIZE(smc91x_resources),
 339         .resource = smc91x_resources,
 340         .dev    = {
 341                 .platform_data  = &smc91x_info,
 342         },
 343 };
 344 #endif
 345
 346 #if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
 347 static struct resource dm9000_resources[] = {
 348         [0] = {
 349                 .start  = 0x203FB800,
 350                 .end    = 0x203FB800 + 1,
 351                 .flags  = IORESOURCE_MEM,
 352         },
 353         [1] = {
 354                 .start  = 0x203FB800 + 4,
 355                 .end    = 0x203FB800 + 5,
 356                 .flags  = IORESOURCE_MEM,
 357         },
 358         [2] = {
 359                 .start  = IRQ_PF9,
 360                 .end    = IRQ_PF9,
 361                 .flags  = (IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE),
 362         },
 363 };
 364
 365 static struct platform_device dm9000_device = {
 366         .name           = "dm9000",
 367         .id             = -1,
 368         .num_resources  = ARRAY_SIZE(dm9000_resources),
 369         .resource       = dm9000_resources,
 370 };
 371 #endif
 372
 373 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
 374 #include <linux/bfin_mac.h>
 375 static const unsigned short bfin_mac_peripherals[] = P_RMII0;
 376
 377 static struct bfin_phydev_platform_data bfin_phydev_data[] = {
 378         {
 379                 .addr = 1,
 380                 .irq = IRQ_MAC_PHYINT,
 381         },
 382 };
 383
 384 static struct bfin_mii_bus_platform_data bfin_mii_bus_data = {
 385         .phydev_number = 1,
 386         .phydev_data = bfin_phydev_data,
 387         .phy_mode = PHY_INTERFACE_MODE_RMII,
 388         .mac_peripherals = bfin_mac_peripherals,
 389 };
 390
 391 static struct platform_device bfin_mii_bus = {
 392         .name = "bfin_mii_bus",
 393         .dev = {
 394                 .platform_data = &bfin_mii_bus_data,
 395         }
 396 };
 397
 398 static struct platform_device bfin_mac_device = {
 399         .name = "bfin_mac",
 400         .dev = {
 401                 .platform_data = &bfin_mii_bus,
 402         }
 403 };
 404 #endif
 405
 406 #if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
 407 static struct resource net2272_bfin_resources[] = {
 408         {
 409                 .start = 0x20300000,
 410                 .end = 0x20300000 + 0x100,
 411                 .flags = IORESOURCE_MEM,
 412         }, {
 413                 .start = 1,
 414                 .flags = IORESOURCE_BUS,
 415         }, {
 416                 .start = IRQ_PF7,
 417                 .end = IRQ_PF7,
 418                 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
 419         },
 420 };
 421
 422 static struct platform_device net2272_bfin_device = {
 423         .name = "net2272",
 424         .id = -1,
 425         .num_resources = ARRAY_SIZE(net2272_bfin_resources),
 426         .resource = net2272_bfin_resources,
 427 };
 428 #endif
 429
 430 #if defined(CONFIG_MTD_M25P80) \
 431         || defined(CONFIG_MTD_M25P80_MODULE)
 432 static struct mtd_partition bfin_spi_flash_partitions[] = {
 433         {
 434                 .name = "bootloader(spi)",
 435                 .size = 0x00040000,
 436                 .offset = 0,
 437                 .mask_flags = MTD_CAP_ROM
 438         }, {
 439                 .name = "linux kernel(spi)",
 440                 .size = MTDPART_SIZ_FULL,
 441                 .offset = MTDPART_OFS_APPEND,
 442         }
 443 };
 444
 445 static struct flash_platform_data bfin_spi_flash_data = {
 446         .name = "m25p80",
 447         .parts = bfin_spi_flash_partitions,
 448         .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
 449         .type = "m25p16",
 450 };
 451
 452 /* SPI flash chip (m25p64) */
 453 static struct bfin5xx_spi_chip spi_flash_chip_info = {
 454         .enable_dma = 0,         /* use dma transfer with this chip*/
 455 };
 456 #endif
 457
 458 #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
 459 static struct bfin5xx_spi_chip  mmc_spi_chip_info = {
 460         .enable_dma = 0,
 461 };
 462 #endif
 463
 464 #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
 465 static const struct ad7877_platform_data bfin_ad7877_ts_info = {
 466         .model                  = 7877,
 467         .vref_delay_usecs       = 50,   /* internal, no capacitor */
 468         .x_plate_ohms           = 419,
 469         .y_plate_ohms           = 486,
 470         .pressure_max           = 1000,
 471         .pressure_min           = 0,
 472         .stopacq_polarity       = 1,
 473         .first_conversion_delay = 3,
 474         .acquisition_time       = 1,
 475         .averaging              = 1,
 476         .pen_down_acc_interval  = 1,
 477 };
 478 #endif
 479
 480 #if defined(CONFIG_TOUCHSCREEN_AD7879) || defined(CONFIG_TOUCHSCREEN_AD7879_MODULE)
 481 #include <linux/spi/ad7879.h>
 482 static const struct ad7879_platform_data bfin_ad7879_ts_info = {
 483         .model                  = 7879, /* Model = AD7879 */
 484         .x_plate_ohms           = 620,  /* 620 Ohm from the touch datasheet */
 485         .pressure_max           = 10000,
 486         .pressure_min           = 0,
 487         .first_conversion_delay = 3,    /* wait 512us before do a first conversion */
 488         .acquisition_time       = 1,    /* 4us acquisition time per sample */
 489         .median                 = 2,    /* do 8 measurements */
 490         .averaging              = 1,    /* take the average of 4 middle samples */
 491         .pen_down_acc_interval  = 255,  /* 9.4 ms */
 492         .gpio_export            = 0,    /* Export GPIO to gpiolib */
 493 };
 494 #endif
 495
 496 #if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) || \
 497         defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE)
 498
 499 static const u16 bfin_snd_pin[][7] = {
 500         {P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
 501                 P_SPORT0_DRPRI, P_SPORT0_RSCLK, 0, 0},
 502         {P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
 503                 P_SPORT1_DRPRI, P_SPORT1_RSCLK, P_SPORT1_TFS, 0},
 504 };
 505
 506 static struct bfin_snd_platform_data bfin_snd_data[] = {
 507         {
 508                 .pin_req = &bfin_snd_pin[0][0],
 509         },
 510         {
 511                 .pin_req = &bfin_snd_pin[1][0],
 512         },
 513 };
 514
 515 #define BFIN_SND_RES(x) \
 516         [x] = { \
 517                 { \
 518                         .start = SPORT##x##_TCR1, \
 519                         .end = SPORT##x##_TCR1, \
 520                         .flags = IORESOURCE_MEM \
 521                 }, \
 522                 { \
 523                         .start = CH_SPORT##x##_RX, \
 524                         .end = CH_SPORT##x##_RX, \
 525                         .flags = IORESOURCE_DMA, \
 526                 }, \
 527                 { \
 528                         .start = CH_SPORT##x##_TX, \
 529                         .end = CH_SPORT##x##_TX, \
 530                         .flags = IORESOURCE_DMA, \
 531                 }, \
 532                 { \
 533                         .start = IRQ_SPORT##x##_ERROR, \
 534                         .end = IRQ_SPORT##x##_ERROR, \
 535                         .flags = IORESOURCE_IRQ, \
 536                 } \
 537         }
 538
 539 static struct resource bfin_snd_resources[][4] = {
 540         BFIN_SND_RES(0),
 541         BFIN_SND_RES(1),
 542 };
 543 #endif
 544
 545 #if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
 546 static struct platform_device bfin_i2s_pcm = {
 547         .name = "bfin-i2s-pcm-audio",
 548         .id = -1,
 549 };
 550 #endif
 551
 552 #if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE)
 553 static struct platform_device bfin_tdm_pcm = {
 554         .name = "bfin-tdm-pcm-audio",
 555         .id = -1,
 556 };
 557 #endif
 558
 559 #if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE)
 560 static struct platform_device bfin_ac97_pcm = {
 561         .name = "bfin-ac97-pcm-audio",
 562         .id = -1,
 563 };
 564 #endif
 565
 566 #if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
 567 static struct platform_device bfin_i2s = {
 568         .name = "bfin-i2s",
 569         .id = CONFIG_SND_BF5XX_SPORT_NUM,
 570         .num_resources = ARRAY_SIZE(bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM]),
 571         .resource = bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM],
 572         .dev = {
 573                 .platform_data = &bfin_snd_data[CONFIG_SND_BF5XX_SPORT_NUM],
 574         },
 575 };
 576 #endif
 577
 578 #if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE)
 579 static struct platform_device bfin_tdm = {
 580         .name = "bfin-tdm",
 581         .id = CONFIG_SND_BF5XX_SPORT_NUM,
 582         .num_resources = ARRAY_SIZE(bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM]),
 583         .resource = bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM],
 584         .dev = {
 585                 .platform_data = &bfin_snd_data[CONFIG_SND_BF5XX_SPORT_NUM],
 586         },
 587 };
 588 #endif
 589
 590 static struct spi_board_info bfin_spi_board_info[] __initdata = {
 591 #if defined(CONFIG_MTD_M25P80) \
 592         || defined(CONFIG_MTD_M25P80_MODULE)
 593         {
 594                 /* the modalias must be the same as spi device driver name */
 595                 .modalias = "m25p80", /* Name of spi_driver for this device */
 596                 .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
 597                 .bus_num = 0, /* Framework bus number */
 598                 .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
 599                 .platform_data = &bfin_spi_flash_data,
 600                 .controller_data = &spi_flash_chip_info,
 601                 .mode = SPI_MODE_3,
 602         },
 603 #endif
 604
 605 #if defined(CONFIG_SND_BF5XX_SOC_AD183X) \
 606         || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE)
 607         {
 608                 .modalias = "ad183x",
 609                 .max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
 610                 .bus_num = 0,
 611                 .chip_select = 4,
 612                 .platform_data = "ad1836",
 613                 .mode = SPI_MODE_3,
 614         },
 615 #endif
 616 #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
 617         {
 618                 .modalias = "mmc_spi",
 619                 .max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
 620                 .bus_num = 0,
 621                 .chip_select = 3,
 622                 .controller_data = &mmc_spi_chip_info,
 623                 .mode = SPI_MODE_0,
 624         },
 625 #endif
 626
 627 #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
 628         {
 629                 .modalias               = "ad7877",
 630                 .platform_data          = &bfin_ad7877_ts_info,
 631                 .irq                    = IRQ_PF8,
 632                 .max_speed_hz   = 12500000,     /* max spi clock (SCK) speed in HZ */
 633                 .bus_num        = 0,
 634                 .chip_select  = 2,
 635         },
 636 #endif
 637 #if defined(CONFIG_TOUCHSCREEN_AD7879_SPI) || defined(CONFIG_TOUCHSCREEN_AD7879_SPI_MODULE)
 638         {
 639                 .modalias = "ad7879",
 640                 .platform_data = &bfin_ad7879_ts_info,
 641                 .irq = IRQ_PF8,
 642                 .max_speed_hz = 5000000,     /* max spi clock (SCK) speed in HZ */
 643                 .bus_num = 0,
 644                 .chip_select = 3,
 645                 .mode = SPI_CPHA | SPI_CPOL,
 646         },
 647 #endif
 648 #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
 649         {
 650                 .modalias = "spidev",
 651                 .max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
 652                 .bus_num = 0,
 653                 .chip_select = 1,
 654         },
 655 #endif
 656 #if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
 657         {
 658                 .modalias = "bfin-lq035q1-spi",
 659                 .max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
 660                 .bus_num = 0,
 661                 .chip_select = 7,
 662                 .mode = SPI_CPHA | SPI_CPOL,
 663         },
 664 #endif
 665 };
 666
 667 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
 668 /* SPI controller data */
 669 static struct bfin5xx_spi_master bfin_spi0_info = {
 670         .num_chipselect = 8,
 671         .enable_dma = 1,  /* master has the ability to do dma transfer */
 672         .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
 673 };
 674
 675 /* SPI (0) */
 676 static struct resource bfin_spi0_resource[] = {
 677         [0] = {
 678                 .start = SPI0_REGBASE,
 679                 .end   = SPI0_REGBASE + 0xFF,
 680                 .flags = IORESOURCE_MEM,
 681                 },
 682         [1] = {
 683                 .start = CH_SPI,
 684                 .end   = CH_SPI,
 685                 .flags = IORESOURCE_DMA,
 686         },
 687         [2] = {
 688                 .start = IRQ_SPI,
 689                 .end   = IRQ_SPI,
 690                 .flags = IORESOURCE_IRQ,
 691         },
 692 };
 693
 694 static struct platform_device bfin_spi0_device = {
 695         .name = "bfin-spi",
 696         .id = 0, /* Bus number */
 697         .num_resources = ARRAY_SIZE(bfin_spi0_resource),
 698         .resource = bfin_spi0_resource,
 699         .dev = {
 700                 .platform_data = &bfin_spi0_info, /* Passed to driver */
 701         },
 702 };
 703 #endif  /* spi master and devices */
 704
 705 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
 706 #ifdef CONFIG_SERIAL_BFIN_UART0
 707 static struct resource bfin_uart0_resources[] = {
 708         {
 709                 .start = UART0_THR,
 710                 .end = UART0_GCTL+2,
 711                 .flags = IORESOURCE_MEM,
 712         },
 713         {
 714                 .start = IRQ_UART0_TX,
 715                 .end = IRQ_UART0_TX,
 716                 .flags = IORESOURCE_IRQ,
 717         },
 718         {
 719                 .start = IRQ_UART0_RX,
 720                 .end = IRQ_UART0_RX,
 721                 .flags = IORESOURCE_IRQ,
 722         },
 723         {
 724                 .start = IRQ_UART0_ERROR,
 725                 .end = IRQ_UART0_ERROR,
 726                 .flags = IORESOURCE_IRQ,
 727         },
 728         {
 729                 .start = CH_UART0_TX,
 730                 .end = CH_UART0_TX,
 731                 .flags = IORESOURCE_DMA,
 732         },
 733         {
 734                 .start = CH_UART0_RX,
 735                 .end = CH_UART0_RX,
 736                 .flags = IORESOURCE_DMA,
 737         },
 738 };
 739
 740 static unsigned short bfin_uart0_peripherals[] = {
 741         P_UART0_TX, P_UART0_RX, 0
 742 };
 743
 744 static struct platform_device bfin_uart0_device = {
 745         .name = "bfin-uart",
 746         .id = 0,
 747         .num_resources = ARRAY_SIZE(bfin_uart0_resources),
 748         .resource = bfin_uart0_resources,
 749         .dev = {
 750                 .platform_data = &bfin_uart0_peripherals, /* Passed to driver */
 751         },
 752 };
 753 #endif
 754 #ifdef CONFIG_SERIAL_BFIN_UART1
 755 static struct resource bfin_uart1_resources[] = {
 756         {
 757                 .start = UART1_THR,
 758                 .end = UART1_GCTL+2,
 759                 .flags = IORESOURCE_MEM,
 760         },
 761         {
 762                 .start = IRQ_UART1_TX,
 763                 .end = IRQ_UART1_TX,
 764                 .flags = IORESOURCE_IRQ,
 765         },
 766         {
 767                 .start = IRQ_UART1_RX,
 768                 .end = IRQ_UART1_RX,
 769                 .flags = IORESOURCE_IRQ,
 770         },
 771         {
 772                 .start = IRQ_UART1_ERROR,
 773                 .end = IRQ_UART1_ERROR,
 774                 .flags = IORESOURCE_IRQ,
 775         },
 776         {
 777                 .start = CH_UART1_TX,
 778                 .end = CH_UART1_TX,
 779                 .flags = IORESOURCE_DMA,
 780         },
 781         {
 782                 .start = CH_UART1_RX,
 783                 .end = CH_UART1_RX,
 784                 .flags = IORESOURCE_DMA,
 785         },
 786 #ifdef CONFIG_BFIN_UART1_CTSRTS
 787         {       /* CTS pin */
 788                 .start = GPIO_PF9,
 789                 .end = GPIO_PF9,
 790                 .flags = IORESOURCE_IO,
 791         },
 792         {       /* RTS pin */
 793                 .start = GPIO_PF10,
 794                 .end = GPIO_PF10,
 795                 .flags = IORESOURCE_IO,
 796         },
 797 #endif
 798 };
 799
 800 static unsigned short bfin_uart1_peripherals[] = {
 801         P_UART1_TX, P_UART1_RX, 0
 802 };
 803
 804 static struct platform_device bfin_uart1_device = {
 805         .name = "bfin-uart",
 806         .id = 1,
 807         .num_resources = ARRAY_SIZE(bfin_uart1_resources),
 808         .resource = bfin_uart1_resources,
 809         .dev = {
 810                 .platform_data = &bfin_uart1_peripherals, /* Passed to driver */
 811         },
 812 };
 813 #endif
 814 #endif
 815
 816 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
 817 #ifdef CONFIG_BFIN_SIR0
 818 static struct resource bfin_sir0_resources[] = {
 819         {
 820                 .start = 0xFFC00400,
 821                 .end = 0xFFC004FF,
 822                 .flags = IORESOURCE_MEM,
 823         },
 824         {
 825                 .start = IRQ_UART0_RX,
 826                 .end = IRQ_UART0_RX+1,
 827                 .flags = IORESOURCE_IRQ,
 828         },
 829         {
 830                 .start = CH_UART0_RX,
 831                 .end = CH_UART0_RX+1,
 832                 .flags = IORESOURCE_DMA,
 833         },
 834 };
 835
 836 static struct platform_device bfin_sir0_device = {
 837         .name = "bfin_sir",
 838         .id = 0,
 839         .num_resources = ARRAY_SIZE(bfin_sir0_resources),
 840         .resource = bfin_sir0_resources,
 841 };
 842 #endif
 843 #ifdef CONFIG_BFIN_SIR1
 844 static struct resource bfin_sir1_resources[] = {
 845         {
 846                 .start = 0xFFC02000,
 847                 .end = 0xFFC020FF,
 848                 .flags = IORESOURCE_MEM,
 849         },
 850         {
 851                 .start = IRQ_UART1_RX,
 852                 .end = IRQ_UART1_RX+1,
 853                 .flags = IORESOURCE_IRQ,
 854         },
 855         {
 856                 .start = CH_UART1_RX,
 857                 .end = CH_UART1_RX+1,
 858                 .flags = IORESOURCE_DMA,
 859         },
 860 };
 861
 862 static struct platform_device bfin_sir1_device = {
 863         .name = "bfin_sir",
 864         .id = 1,
 865         .num_resources = ARRAY_SIZE(bfin_sir1_resources),
 866         .resource = bfin_sir1_resources,
 867 };
 868 #endif
 869 #endif
 870
 871 #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
 872 static struct resource bfin_twi0_resource[] = {
 873         [0] = {
 874                 .start = TWI0_REGBASE,
 875                 .end   = TWI0_REGBASE,
 876                 .flags = IORESOURCE_MEM,
 877         },
 878         [1] = {
 879                 .start = IRQ_TWI,
 880                 .end   = IRQ_TWI,
 881                 .flags = IORESOURCE_IRQ,
 882         },
 883 };
 884
 885 static struct platform_device i2c_bfin_twi_device = {
 886         .name = "i2c-bfin-twi",
 887         .id = 0,
 888         .num_resources = ARRAY_SIZE(bfin_twi0_resource),
 889         .resource = bfin_twi0_resource,
 890 };
 891 #endif
 892
 893 #if defined(CONFIG_PMIC_ADP5520) || defined(CONFIG_PMIC_ADP5520_MODULE)
 894 #include <linux/mfd/adp5520.h>
 895
 896         /*
 897          *  ADP5520/5501 LEDs Data
 898          */
 899
 900 static struct led_info adp5520_leds[] = {
 901         {
 902                 .name = "adp5520-led1",
 903                 .default_trigger = "none",
 904                 .flags = FLAG_ID_ADP5520_LED1_ADP5501_LED0 | ADP5520_LED_OFFT_600ms,
 905         },
 906 };
 907
 908 static struct adp5520_leds_platform_data adp5520_leds_data = {
 909         .num_leds = ARRAY_SIZE(adp5520_leds),
 910         .leds = adp5520_leds,
 911         .fade_in = ADP5520_FADE_T_600ms,
 912         .fade_out = ADP5520_FADE_T_600ms,
 913         .led_on_time = ADP5520_LED_ONT_600ms,
 914 };
 915
 916         /*
 917          *  ADP5520 Keypad Data
 918          */
 919
 920 static const unsigned short adp5520_keymap[ADP5520_KEYMAPSIZE] = {
 921         [ADP5520_KEY(3, 3)]     = KEY_1,
 922         [ADP5520_KEY(2, 3)]     = KEY_2,
 923         [ADP5520_KEY(1, 3)]     = KEY_3,
 924         [ADP5520_KEY(0, 3)]     = KEY_UP,
 925         [ADP5520_KEY(3, 2)]     = KEY_4,
 926         [ADP5520_KEY(2, 2)]     = KEY_5,
 927         [ADP5520_KEY(1, 2)]     = KEY_6,
 928         [ADP5520_KEY(0, 2)]     = KEY_DOWN,
 929         [ADP5520_KEY(3, 1)]     = KEY_7,
 930         [ADP5520_KEY(2, 1)]     = KEY_8,
 931         [ADP5520_KEY(1, 1)]     = KEY_9,
 932         [ADP5520_KEY(0, 1)]     = KEY_DOT,
 933         [ADP5520_KEY(3, 0)]     = KEY_BACKSPACE,
 934         [ADP5520_KEY(2, 0)]     = KEY_0,
 935         [ADP5520_KEY(1, 0)]     = KEY_HELP,
 936         [ADP5520_KEY(0, 0)]     = KEY_ENTER,
 937 };
 938
 939 static struct adp5520_keys_platform_data adp5520_keys_data = {
 940         .rows_en_mask   = ADP5520_ROW_R3 | ADP5520_ROW_R2 | ADP5520_ROW_R1 | ADP5520_ROW_R0,
 941         .cols_en_mask   = ADP5520_COL_C3 | ADP5520_COL_C2 | ADP5520_COL_C1 | ADP5520_COL_C0,
 942         .keymap         = adp5520_keymap,
 943         .keymapsize     = ARRAY_SIZE(adp5520_keymap),
 944         .repeat         = 0,
 945 };
 946
 947         /*
 948          *  ADP5520/5501 Multifunction Device Init Data
 949          */
 950
 951 static struct adp5520_platform_data adp5520_pdev_data = {
 952         .leds = &adp5520_leds_data,
 953         .keys = &adp5520_keys_data,
 954 };
 955
 956 #endif
 957
 958 static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 959 #if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
 960         {
 961                 I2C_BOARD_INFO("pcf8574_lcd", 0x22),
 962         },
 963 #endif
 964 #if defined(CONFIG_INPUT_PCF8574) || defined(CONFIG_INPUT_PCF8574_MODULE)
 965         {
 966                 I2C_BOARD_INFO("pcf8574_keypad", 0x27),
 967                 .irq = IRQ_PF8,
 968         },
 969 #endif
 970 #if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
 971         {
 972                 I2C_BOARD_INFO("bfin-adv7393", 0x2B),
 973         },
 974 #endif
 975 #if defined(CONFIG_TOUCHSCREEN_AD7879_I2C) || defined(CONFIG_TOUCHSCREEN_AD7879_I2C_MODULE)
 976         {
 977                 I2C_BOARD_INFO("ad7879", 0x2C),
 978                 .irq = IRQ_PF8,
 979                 .platform_data = (void *)&bfin_ad7879_ts_info,
 980         },
 981 #endif
 982 #if defined(CONFIG_PMIC_ADP5520) || defined(CONFIG_PMIC_ADP5520_MODULE)
 983         {
 984                 I2C_BOARD_INFO("pmic-adp5520", 0x32),
 985                 .irq = IRQ_PF9,
 986                 .platform_data = (void *)&adp5520_pdev_data,
 987         },
 988 #endif
 989 #if defined(CONFIG_SND_SOC_SSM2602) || defined(CONFIG_SND_SOC_SSM2602_MODULE)
 990         {
 991                 I2C_BOARD_INFO("ssm2602", 0x1b),
 992         },
 993 #endif
 994 #if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
 995         {
 996                 I2C_BOARD_INFO("ad5252", 0x2f),
 997         },
 998 #endif
 999 #if defined(CONFIG_SND_SOC_ADAU1373) || defined(CONFIG_SND_SOC_ADAU1373_MODULE)
1000         {
1001                 I2C_BOARD_INFO("adau1373", 0x1A),
1002         },
1003 #endif
1004 };
1005
1006 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
1007 #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
1008 static struct resource bfin_sport0_uart_resources[] = {
1009         {
1010                 .start = SPORT0_TCR1,
1011                 .end = SPORT0_MRCS3+4,
1012                 .flags = IORESOURCE_MEM,
1013         },
1014         {
1015                 .start = IRQ_SPORT0_RX,
1016                 .end = IRQ_SPORT0_RX+1,
1017                 .flags = IORESOURCE_IRQ,
1018         },
1019         {
1020                 .start = IRQ_SPORT0_ERROR,
1021                 .end = IRQ_SPORT0_ERROR,
1022                 .flags = IORESOURCE_IRQ,
1023         },
1024 };
1025
1026 static unsigned short bfin_sport0_peripherals[] = {
1027         P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
1028         P_SPORT0_DRPRI, P_SPORT0_RSCLK, 0
1029 };
1030
1031 static struct platform_device bfin_sport0_uart_device = {
1032         .name = "bfin-sport-uart",
1033         .id = 0,
1034         .num_resources = ARRAY_SIZE(bfin_sport0_uart_resources),
1035         .resource = bfin_sport0_uart_resources,
1036         .dev = {
1037                 .platform_data = &bfin_sport0_peripherals, /* Passed to driver */
1038         },
1039 };
1040 #endif
1041 #ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
1042 static struct resource bfin_sport1_uart_resources[] = {
1043         {
1044                 .start = SPORT1_TCR1,
1045                 .end = SPORT1_MRCS3+4,
1046                 .flags = IORESOURCE_MEM,
1047         },
1048         {
1049                 .start = IRQ_SPORT1_RX,
1050                 .end = IRQ_SPORT1_RX+1,
1051                 .flags = IORESOURCE_IRQ,
1052         },
1053         {
1054                 .start = IRQ_SPORT1_ERROR,
1055                 .end = IRQ_SPORT1_ERROR,
1056                 .flags = IORESOURCE_IRQ,
1057         },
1058 };
1059
1060 static unsigned short bfin_sport1_peripherals[] = {
1061         P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
1062         P_SPORT1_DRPRI, P_SPORT1_RSCLK, 0
1063 };
1064
1065 static struct platform_device bfin_sport1_uart_device = {
1066         .name = "bfin-sport-uart",
1067         .id = 1,
1068         .num_resources = ARRAY_SIZE(bfin_sport1_uart_resources),
1069         .resource = bfin_sport1_uart_resources,
1070         .dev = {
1071                 .platform_data = &bfin_sport1_peripherals, /* Passed to driver */
1072         },
1073 };
1074 #endif
1075 #endif
1076
1077 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
1078 #include <linux/gpio_keys.h>
1079
1080 static struct gpio_keys_button bfin_gpio_keys_table[] = {
1081         {BTN_0, GPIO_PG0, 1, "gpio-keys: BTN0"},
1082         {BTN_1, GPIO_PG13, 1, "gpio-keys: BTN1"},
1083 };
1084
1085 static struct gpio_keys_platform_data bfin_gpio_keys_data = {
1086         .buttons        = bfin_gpio_keys_table,
1087         .nbuttons       = ARRAY_SIZE(bfin_gpio_keys_table),
1088 };
1089
1090 static struct platform_device bfin_device_gpiokeys = {
1091         .name      = "gpio-keys",
1092         .dev = {
1093                 .platform_data = &bfin_gpio_keys_data,
1094         },
1095 };
1096 #endif
1097
1098 #if defined(CONFIG_INPUT_BFIN_ROTARY) || defined(CONFIG_INPUT_BFIN_ROTARY_MODULE)
1099 #include <asm/bfin_rotary.h>
1100
1101 static struct bfin_rotary_platform_data bfin_rotary_data = {
1102         /*.rotary_up_key     = KEY_UP,*/
1103         /*.rotary_down_key   = KEY_DOWN,*/
1104         .rotary_rel_code   = REL_WHEEL,
1105         .rotary_button_key = KEY_ENTER,
1106         .debounce          = 10,        /* 0..17 */
1107         .mode              = ROT_QUAD_ENC | ROT_DEBE,
1108 };
1109
1110 static struct resource bfin_rotary_resources[] = {
1111         {
1112                 .start = IRQ_CNT,
1113                 .end = IRQ_CNT,
1114                 .flags = IORESOURCE_IRQ,
1115         },
1116 };
1117
1118 static struct platform_device bfin_rotary_device = {
1119         .name           = "bfin-rotary",
1120         .id             = -1,
1121         .num_resources  = ARRAY_SIZE(bfin_rotary_resources),
1122         .resource       = bfin_rotary_resources,
1123         .dev            = {
1124                 .platform_data = &bfin_rotary_data,
1125         },
1126 };
1127 #endif
1128
1129 static const unsigned int cclk_vlev_datasheet[] =
1130 {
1131         VRPAIR(VLEV_100, 400000000),
1132         VRPAIR(VLEV_105, 426000000),
1133         VRPAIR(VLEV_110, 500000000),
1134         VRPAIR(VLEV_115, 533000000),
1135         VRPAIR(VLEV_120, 600000000),
1136 };
1137
1138 static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
1139         .tuple_tab = cclk_vlev_datasheet,
1140         .tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
1141         .vr_settling_time = 25 /* us */,
1142 };
1143
1144 static struct platform_device bfin_dpmc = {
1145         .name = "bfin dpmc",
1146         .dev = {
1147                 .platform_data = &bfin_dmpc_vreg_data,
1148         },
1149 };
1150
1151 static struct platform_device *stamp_devices[] __initdata = {
1152
1153         &bfin_dpmc,
1154
1155 #if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
1156         &bf5xx_nand_device,
1157 #endif
1158
1159 #if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
1160         &bfin_pcmcia_cf_device,
1161 #endif
1162
1163 #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
1164         &rtc_device,
1165 #endif
1166
1167 #if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
1168         &bfin_isp1760_device,
1169 #endif
1170
1171 #if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
1172         &musb_device,
1173 #endif
1174
1175 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
1176         &smc91x_device,
1177 #endif
1178
1179 #if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
1180         &dm9000_device,
1181 #endif
1182
1183 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
1184         &bfin_mii_bus,
1185         &bfin_mac_device,
1186 #endif
1187
1188 #if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
1189         &net2272_bfin_device,
1190 #endif
1191
1192 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
1193         &bfin_spi0_device,
1194 #endif
1195
1196 #if defined(CONFIG_FB_BFIN_T350MCQB) || defined(CONFIG_FB_BFIN_T350MCQB_MODULE)
1197         &bf52x_t350mcqb_device,
1198 #endif
1199
1200 #if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
1201         &bfin_lq035q1_device,
1202 #endif
1203
1204 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
1205 #ifdef CONFIG_SERIAL_BFIN_UART0
1206         &bfin_uart0_device,
1207 #endif
1208 #ifdef CONFIG_SERIAL_BFIN_UART1
1209         &bfin_uart1_device,
1210 #endif
1211 #endif
1212
1213 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
1214 #ifdef CONFIG_BFIN_SIR0
1215         &bfin_sir0_device,
1216 #endif
1217 #ifdef CONFIG_BFIN_SIR1
1218         &bfin_sir1_device,
1219 #endif
1220 #endif
1221
1222 #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
1223         &i2c_bfin_twi_device,
1224 #endif
1225
1226 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
1227 #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
1228         &bfin_sport0_uart_device,
1229 #endif
1230 #ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
1231         &bfin_sport1_uart_device,
1232 #endif
1233 #endif
1234
1235 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
1236         &bfin_device_gpiokeys,
1237 #endif
1238
1239 #if defined(CONFIG_INPUT_BFIN_ROTARY) || defined(CONFIG_INPUT_BFIN_ROTARY_MODULE)
1240         &bfin_rotary_device,
1241 #endif
1242
1243 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
1244         &ezkit_flash_device,
1245 #endif
1246
1247 #if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
1248         &bfin_i2s_pcm,
1249 #endif
1250
1251 #if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE)
1252         &bfin_tdm_pcm,
1253 #endif
1254
1255 #if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE)
1256         &bfin_ac97_pcm,
1257 #endif
1258
1259 #if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
1260         &bfin_i2s,
1261 #endif
1262
1263 #if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE)
1264         &bfin_tdm,
1265 #endif
1266 };
1267
1268 static int __init ezkit_init(void)
1269 {
1270         printk(KERN_INFO "%s(): registering device resources\n", __func__);
1271         i2c_register_board_info(0, bfin_i2c_board_info,
1272                                 ARRAY_SIZE(bfin_i2c_board_info));
1273         platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
1274         spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
1275         return 0;
1276 }
1277
1278 arch_initcall(ezkit_init);
1279
1280 static struct platform_device *ezkit_early_devices[] __initdata = {
1281 #if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
1282 #ifdef CONFIG_SERIAL_BFIN_UART0
1283         &bfin_uart0_device,
1284 #endif
1285 #ifdef CONFIG_SERIAL_BFIN_UART1
1286         &bfin_uart1_device,
1287 #endif
1288 #endif
1289
1290 #if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE)
1291 #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
1292         &bfin_sport0_uart_device,
1293 #endif
1294 #ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
1295         &bfin_sport1_uart_device,
1296 #endif
1297 #endif
1298 };
1299
1300 void __init native_machine_early_platform_add_devices(void)
1301 {
1302         printk(KERN_INFO "register early platform devices\n");
1303         early_platform_add_devices(ezkit_early_devices,
1304                 ARRAY_SIZE(ezkit_early_devices));
1305 }
1306
1307 void native_machine_restart(char *cmd)
1308 {
1309         /* workaround reboot hang when booting from SPI */
1310         if ((bfin_read_SYSCR() & 0x7) == 0x3)
1311                 bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS);
1312 }
1313
1314 void bfin_get_ether_addr(char *addr)
1315 {
1316         /* the MAC is stored in OTP memory page 0xDF */
1317         u32 ret;
1318         u64 otp_mac;
1319         u32 (*otp_read)(u32 page, u32 flags, u64 *page_content) = (void *)0xEF00001A;
1320
1321         ret = otp_read(0xDF, 0x00, &otp_mac);
1322         if (!(ret & 0x1)) {
1323                 char *otp_mac_p = (char *)&otp_mac;
1324                 for (ret = 0; ret < 6; ++ret)
1325                         addr[ret] = otp_mac_p[5 - ret];
1326         }
1327 }
1328 EXPORT_SYMBOL(bfin_get_ether_addr);