arch/blackfin/include/asm/uaccess.h

   1 /*
   2  * Copyright 2004-2009 Analog Devices Inc.
   3  *
   4  * Licensed under the GPL-2 or later.
   5  *
   6  * Based on: include/asm-m68knommu/uaccess.h
   7  */
   8
   9 #ifndef __BLACKFIN_UACCESS_H
  10 #define __BLACKFIN_UACCESS_H
  11
  12 /*
  13  * User space memory access functions
  14  */
  15 #include <linux/sched.h>
  16 #include <linux/mm.h>
  17 #include <linux/string.h>
  18
  19 #include <asm/segment.h>
  20 #ifdef CONFIG_ACCESS_CHECK
  21 # include <asm/bfin-global.h>
  22 #endif
  23
  24 #define get_ds()        (KERNEL_DS)
  25 #define get_fs()        (current_thread_info()->addr_limit)
  26
  27 static inline void set_fs(mm_segment_t fs)
  28 {
  29         current_thread_info()->addr_limit = fs;
  30 }
  31
  32 #define segment_eq(a,b) ((a) == (b))
  33
  34 #define VERIFY_READ     0
  35 #define VERIFY_WRITE    1
  36
  37 #define access_ok(type, addr, size) _access_ok((unsigned long)(addr), (size))
  38
  39 static inline int is_in_rom(unsigned long addr)
  40 {
  41         /*
  42          * What we are really trying to do is determine if addr is
  43          * in an allocated kernel memory region. If not then assume
  44          * we cannot free it or otherwise de-allocate it. Ideally
  45          * we could restrict this to really being in a ROM or flash,
  46          * but that would need to be done on a board by board basis,
  47          * not globally.
  48          */
  49         if ((addr < _ramstart) || (addr >= _ramend))
  50                 return (1);
  51
  52         /* Default case, not in ROM */
  53         return (0);
  54 }
  55
  56 /*
  57  * The fs value determines whether argument validity checking should be
  58  * performed or not.  If get_fs() == USER_DS, checking is performed, with
  59  * get_fs() == KERNEL_DS, checking is bypassed.
  60  */
  61
  62 #ifndef CONFIG_ACCESS_CHECK
  63 static inline int _access_ok(unsigned long addr, unsigned long size) { return 1; }
  64 #else
  65 extern int _access_ok(unsigned long addr, unsigned long size);
  66 #endif
  67
  68 /*
  69  * The exception table consists of pairs of addresses: the first is the
  70  * address of an instruction that is allowed to fault, and the second is
  71  * the address at which the program should continue.  No registers are
  72  * modified, so it is entirely up to the continuation code to figure out
  73  * what to do.
  74  *
  75  * All the routines below use bits of fixup code that are out of line
  76  * with the main instruction path.  This means when everything is well,
  77  * we don't even have to jump over them.  Further, they do not intrude
  78  * on our cache or tlb entries.
  79  */
  80
  81 struct exception_table_entry {
  82         unsigned long insn, fixup;
  83 };
  84
  85 /*
  86  * These are the main single-value transfer routines.  They automatically
  87  * use the right size if we just have the right pointer type.
  88  */
  89
  90 #define put_user(x,p)                                           \
  91         ({                                                      \
  92                 int _err = 0;                                   \
  93                 typeof(*(p)) _x = (x);                          \
  94                 typeof(*(p)) *_p = (p);                         \
  95                 if (!access_ok(VERIFY_WRITE, _p, sizeof(*(_p)))) {\
  96                         _err = -EFAULT;                         \
  97                 }                                               \
  98                 else {                                          \
  99                 switch (sizeof (*(_p))) {                       \
 100                 case 1:                                         \
 101                         __put_user_asm(_x, _p, B);              \
 102                         break;                                  \
 103                 case 2:                                         \
 104                         __put_user_asm(_x, _p, W);              \
 105                         break;                                  \
 106                 case 4:                                         \
 107                         __put_user_asm(_x, _p,  );              \
 108                         break;                                  \
 109                 case 8: {                                       \
 110                         long _xl, _xh;                          \
 111                         _xl = ((long *)&_x)[0];                 \
 112                         _xh = ((long *)&_x)[1];                 \
 113                         __put_user_asm(_xl, ((long *)_p)+0, );  \
 114                         __put_user_asm(_xh, ((long *)_p)+1, );  \
 115                 } break;                                        \
 116                 default:                                        \
 117                         _err = __put_user_bad();                \
 118                         break;                                  \
 119                 }                                               \
 120                 }                                               \
 121                 _err;                                           \
 122         })
 123
 124 #define __put_user(x,p) put_user(x,p)
 125 static inline int bad_user_access_length(void)
 126 {
 127         panic("bad_user_access_length");
 128         return -1;
 129 }
 130
 131 #define __put_user_bad() (printk(KERN_INFO "put_user_bad %s:%d %s\n",\
 132                            __FILE__, __LINE__, __func__),\
 133                            bad_user_access_length(), (-EFAULT))
 134
 135 /*
 136  * Tell gcc we read from memory instead of writing: this is because
 137  * we do not write to any memory gcc knows about, so there are no
 138  * aliasing issues.
 139  */
 140
 141 #define __ptr(x) ((unsigned long *)(x))
 142
 143 #define __put_user_asm(x,p,bhw)                         \
 144         __asm__ (#bhw"[%1] = %0;\n\t"                   \
 145                  : /* no outputs */                     \
 146                  :"d" (x),"a" (__ptr(p)) : "memory")
 147
 148 #define get_user(x, ptr)                                        \
 149 ({                                                              \
 150         int _err = 0;                                           \
 151         unsigned long _val = 0;                                 \
 152         const typeof(*(ptr)) __user *_p = (ptr);                \
 153         const size_t ptr_size = sizeof(*(_p));                  \
 154         if (likely(access_ok(VERIFY_READ, _p, ptr_size))) {     \
 155                 BUILD_BUG_ON(ptr_size >= 8);                    \
 156                 switch (ptr_size) {                             \
 157                 case 1:                                         \
 158                         __get_user_asm(_val, _p, B,(Z));        \
 159                         break;                                  \
 160                 case 2:                                         \
 161                         __get_user_asm(_val, _p, W,(Z));        \
 162                         break;                                  \
 163                 case 4:                                         \
 164                         __get_user_asm(_val, _p,  , );          \
 165                         break;                                  \
 166                 }                                               \
 167         } else                                                  \
 168                 _err = -EFAULT;                                 \
 169         x = (typeof(*(ptr)))_val;                               \
 170         _err;                                                   \
 171 })
 172
 173 #define __get_user(x,p) get_user(x,p)
 174
 175 #define __get_user_bad() (bad_user_access_length(), (-EFAULT))
 176
 177 #define __get_user_asm(x, ptr, bhw, option)     \
 178 ({                                              \
 179         __asm__ __volatile__ (                  \
 180                 "%0 =" #bhw "[%1]" #option ";"  \
 181                 : "=d" (x)                      \
 182                 : "a" (__ptr(ptr)));            \
 183 })
 184
 185 #define __copy_from_user(to, from, n) copy_from_user(to, from, n)
 186 #define __copy_to_user(to, from, n) copy_to_user(to, from, n)
 187 #define __copy_to_user_inatomic __copy_to_user
 188 #define __copy_from_user_inatomic __copy_from_user
 189
 190 #define copy_to_user_ret(to,from,n,retval) ({ if (copy_to_user(to,from,n))\
 191                                                  return retval; })
 192
 193 #define copy_from_user_ret(to,from,n,retval) ({ if (copy_from_user(to,from,n))\
 194                                                    return retval; })
 195
 196 static inline unsigned long __must_check
 197 copy_from_user(void *to, const void __user *from, unsigned long n)
 198 {
 199         if (access_ok(VERIFY_READ, from, n))
 200                 memcpy(to, from, n);
 201         else
 202                 return n;
 203         return 0;
 204 }
 205
 206 static inline unsigned long __must_check
 207 copy_to_user(void *to, const void __user *from, unsigned long n)
 208 {
 209         if (access_ok(VERIFY_WRITE, to, n))
 210                 memcpy(to, from, n);
 211         else
 212                 return n;
 213         return 0;
 214 }
 215
 216 /*
 217  * Copy a null terminated string from userspace.
 218  */
 219
 220 static inline long __must_check
 221 strncpy_from_user(char *dst, const char *src, long count)
 222 {
 223         char *tmp;
 224         if (!access_ok(VERIFY_READ, src, 1))
 225                 return -EFAULT;
 226         strncpy(dst, src, count);
 227         for (tmp = dst; *tmp && count > 0; tmp++, count--) ;
 228         return (tmp - dst);
 229 }
 230
 231 /*
 232  * Get the size of a string in user space.
 233  *   src: The string to measure
 234  *     n: The maximum valid length
 235  *
 236  * Get the size of a NUL-terminated string in user space.
 237  *
 238  * Returns the size of the string INCLUDING the terminating NUL.
 239  * On exception, returns 0.
 240  * If the string is too long, returns a value greater than n.
 241  */
 242 static inline long __must_check strnlen_user(const char *src, long n)
 243 {
 244         if (!access_ok(VERIFY_READ, src, 1))
 245                 return 0;
 246         return strnlen(src, n) + 1;
 247 }
 248
 249 static inline long __must_check strlen_user(const char *src)
 250 {
 251         if (!access_ok(VERIFY_READ, src, 1))
 252                 return 0;
 253         return strlen(src) + 1;
 254 }
 255
 256 /*
 257  * Zero Userspace
 258  */
 259
 260 static inline unsigned long __must_check
 261 __clear_user(void *to, unsigned long n)
 262 {
 263         if (!access_ok(VERIFY_WRITE, to, n))
 264                 return n;
 265         memset(to, 0, n);
 266         return 0;
 267 }
 268
 269 #define clear_user(to, n) __clear_user(to, n)
 270
 271 /* How to interpret these return values:
 272  *      CORE:      can be accessed by core load or dma memcpy
 273  *      CORE_ONLY: can only be accessed by core load
 274  *      DMA:       can only be accessed by dma memcpy
 275  *      IDMA:      can only be accessed by interprocessor dma memcpy (BF561)
 276  *      ITEST:     can be accessed by isram memcpy or dma memcpy
 277  */
 278 enum {
 279         BFIN_MEM_ACCESS_CORE = 0,
 280         BFIN_MEM_ACCESS_CORE_ONLY,
 281         BFIN_MEM_ACCESS_DMA,
 282         BFIN_MEM_ACCESS_IDMA,
 283         BFIN_MEM_ACCESS_ITEST,
 284 };
 285 /**
 286  *      bfin_mem_access_type() - what kind of memory access is required
 287  *      @addr:   the address to check
 288  *      @size:   number of bytes needed
 289  *      @return: <0 is error, >=0 is BFIN_MEM_ACCESS_xxx enum (see above)
 290  */
 291 int bfin_mem_access_type(unsigned long addr, unsigned long size);
 292
 293 #endif                          /* _BLACKFIN_UACCESS_H */