arch/blackfin/include/asm/uaccess.h

   1 /*
   2  * Copyright 2004-2009 Analog Devices Inc.
   3  *
   4  * Licensed under the GPL-2 or later.
   5  *
   6  * Based on: include/asm-m68knommu/uaccess.h
   7  */
   8
   9 #ifndef __BLACKFIN_UACCESS_H
  10 #define __BLACKFIN_UACCESS_H
  11
  12 /*
  13  * User space memory access functions
  14  */
  15 #include <linux/sched.h>
  16 #include <linux/mm.h>
  17 #include <linux/string.h>
  18
  19 #include <asm/segment.h>
  20 #include <asm/sections.h>
  21
  22 #define get_ds()        (KERNEL_DS)
  23 #define get_fs()        (current_thread_info()->addr_limit)
  24
  25 static inline void set_fs(mm_segment_t fs)
  26 {
  27         current_thread_info()->addr_limit = fs;
  28 }
  29
  30 #define segment_eq(a,b) ((a) == (b))
  31
  32 #define VERIFY_READ     0
  33 #define VERIFY_WRITE    1
  34
  35 #define access_ok(type, addr, size) _access_ok((unsigned long)(addr), (size))
  36
  37 static inline int is_in_rom(unsigned long addr)
  38 {
  39         /*
  40          * What we are really trying to do is determine if addr is
  41          * in an allocated kernel memory region. If not then assume
  42          * we cannot free it or otherwise de-allocate it. Ideally
  43          * we could restrict this to really being in a ROM or flash,
  44          * but that would need to be done on a board by board basis,
  45          * not globally.
  46          */
  47         if ((addr < _ramstart) || (addr >= _ramend))
  48                 return (1);
  49
  50         /* Default case, not in ROM */
  51         return (0);
  52 }
  53
  54 /*
  55  * The fs value determines whether argument validity checking should be
  56  * performed or not.  If get_fs() == USER_DS, checking is performed, with
  57  * get_fs() == KERNEL_DS, checking is bypassed.
  58  */
  59
  60 #ifndef CONFIG_ACCESS_CHECK
  61 static inline int _access_ok(unsigned long addr, unsigned long size) { return 1; }
  62 #else
  63 extern int _access_ok(unsigned long addr, unsigned long size);
  64 #endif
  65
  66 /*
  67  * The exception table consists of pairs of addresses: the first is the
  68  * address of an instruction that is allowed to fault, and the second is
  69  * the address at which the program should continue.  No registers are
  70  * modified, so it is entirely up to the continuation code to figure out
  71  * what to do.
  72  *
  73  * All the routines below use bits of fixup code that are out of line
  74  * with the main instruction path.  This means when everything is well,
  75  * we don't even have to jump over them.  Further, they do not intrude
  76  * on our cache or tlb entries.
  77  */
  78
  79 struct exception_table_entry {
  80         unsigned long insn, fixup;
  81 };
  82
  83 /*
  84  * These are the main single-value transfer routines.  They automatically
  85  * use the right size if we just have the right pointer type.
  86  */
  87
  88 #define put_user(x,p)                                           \
  89         ({                                                      \
  90                 int _err = 0;                                   \
  91                 typeof(*(p)) _x = (x);                          \
  92                 typeof(*(p)) *_p = (p);                         \
  93                 if (!access_ok(VERIFY_WRITE, _p, sizeof(*(_p)))) {\
  94                         _err = -EFAULT;                         \
  95                 }                                               \
  96                 else {                                          \
  97                 switch (sizeof (*(_p))) {                       \
  98                 case 1:                                         \
  99                         __put_user_asm(_x, _p, B);              \
 100                         break;                                  \
 101                 case 2:                                         \
 102                         __put_user_asm(_x, _p, W);              \
 103                         break;                                  \
 104                 case 4:                                         \
 105                         __put_user_asm(_x, _p,  );              \
 106                         break;                                  \
 107                 case 8: {                                       \
 108                         long _xl, _xh;                          \
 109                         _xl = ((long *)&_x)[0];                 \
 110                         _xh = ((long *)&_x)[1];                 \
 111                         __put_user_asm(_xl, ((long *)_p)+0, );  \
 112                         __put_user_asm(_xh, ((long *)_p)+1, );  \
 113                 } break;                                        \
 114                 default:                                        \
 115                         _err = __put_user_bad();                \
 116                         break;                                  \
 117                 }                                               \
 118                 }                                               \
 119                 _err;                                           \
 120         })
 121
 122 #define __put_user(x,p) put_user(x,p)
 123 static inline int bad_user_access_length(void)
 124 {
 125         panic("bad_user_access_length");
 126         return -1;
 127 }
 128
 129 #define __put_user_bad() (printk(KERN_INFO "put_user_bad %s:%d %s\n",\
 130                            __FILE__, __LINE__, __func__),\
 131                            bad_user_access_length(), (-EFAULT))
 132
 133 /*
 134  * Tell gcc we read from memory instead of writing: this is because
 135  * we do not write to any memory gcc knows about, so there are no
 136  * aliasing issues.
 137  */
 138
 139 #define __ptr(x) ((unsigned long *)(x))
 140
 141 #define __put_user_asm(x,p,bhw)                         \
 142         __asm__ (#bhw"[%1] = %0;\n\t"                   \
 143                  : /* no outputs */                     \
 144                  :"d" (x),"a" (__ptr(p)) : "memory")
 145
 146 #define get_user(x, ptr)                                        \
 147 ({                                                              \
 148         int _err = 0;                                           \
 149         unsigned long _val = 0;                                 \
 150         const typeof(*(ptr)) __user *_p = (ptr);                \
 151         const size_t ptr_size = sizeof(*(_p));                  \
 152         if (likely(access_ok(VERIFY_READ, _p, ptr_size))) {     \
 153                 BUILD_BUG_ON(ptr_size >= 8);                    \
 154                 switch (ptr_size) {                             \
 155                 case 1:                                         \
 156                         __get_user_asm(_val, _p, B,(Z));        \
 157                         break;                                  \
 158                 case 2:                                         \
 159                         __get_user_asm(_val, _p, W,(Z));        \
 160                         break;                                  \
 161                 case 4:                                         \
 162                         __get_user_asm(_val, _p,  , );          \
 163                         break;                                  \
 164                 }                                               \
 165         } else                                                  \
 166                 _err = -EFAULT;                                 \
 167         x = (typeof(*(ptr)))_val;                               \
 168         _err;                                                   \
 169 })
 170
 171 #define __get_user(x,p) get_user(x,p)
 172
 173 #define __get_user_bad() (bad_user_access_length(), (-EFAULT))
 174
 175 #define __get_user_asm(x, ptr, bhw, option)     \
 176 ({                                              \
 177         __asm__ __volatile__ (                  \
 178                 "%0 =" #bhw "[%1]" #option ";"  \
 179                 : "=d" (x)                      \
 180                 : "a" (__ptr(ptr)));            \
 181 })
 182
 183 #define __copy_from_user(to, from, n) copy_from_user(to, from, n)
 184 #define __copy_to_user(to, from, n) copy_to_user(to, from, n)
 185 #define __copy_to_user_inatomic __copy_to_user
 186 #define __copy_from_user_inatomic __copy_from_user
 187
 188 #define copy_to_user_ret(to,from,n,retval) ({ if (copy_to_user(to,from,n))\
 189                                                  return retval; })
 190
 191 #define copy_from_user_ret(to,from,n,retval) ({ if (copy_from_user(to,from,n))\
 192                                                    return retval; })
 193
 194 static inline unsigned long __must_check
 195 copy_from_user(void *to, const void __user *from, unsigned long n)
 196 {
 197         if (likely(access_ok(VERIFY_READ, from, n))) {
 198                 memcpy(to, (const void __force *)from, n);
 199                 return 0;
 200         }
 201         memset(to, 0, n);
 202         return n;
 203 }
 204
 205 static inline unsigned long __must_check
 206 copy_to_user(void __user *to, const void *from, unsigned long n)
 207 {
 208         if (access_ok(VERIFY_WRITE, to, n))
 209                 memcpy((void __force *)to, from, n);
 210         else
 211                 return n;
 212         return 0;
 213 }
 214
 215 /*
 216  * Copy a null terminated string from userspace.
 217  */
 218
 219 static inline long __must_check
 220 strncpy_from_user(char *dst, const char *src, long count)
 221 {
 222         char *tmp;
 223         if (!access_ok(VERIFY_READ, src, 1))
 224                 return -EFAULT;
 225         strncpy(dst, src, count);
 226         for (tmp = dst; *tmp && count > 0; tmp++, count--) ;
 227         return (tmp - dst);
 228 }
 229
 230 /*
 231  * Get the size of a string in user space.
 232  *   src: The string to measure
 233  *     n: The maximum valid length
 234  *
 235  * Get the size of a NUL-terminated string in user space.
 236  *
 237  * Returns the size of the string INCLUDING the terminating NUL.
 238  * On exception, returns 0.
 239  * If the string is too long, returns a value greater than n.
 240  */
 241 static inline long __must_check strnlen_user(const char *src, long n)
 242 {
 243         if (!access_ok(VERIFY_READ, src, 1))
 244                 return 0;
 245         return strnlen(src, n) + 1;
 246 }
 247
 248 static inline long __must_check strlen_user(const char *src)
 249 {
 250         if (!access_ok(VERIFY_READ, src, 1))
 251                 return 0;
 252         return strlen(src) + 1;
 253 }
 254
 255 /*
 256  * Zero Userspace
 257  */
 258
 259 static inline unsigned long __must_check
 260 __clear_user(void *to, unsigned long n)
 261 {
 262         if (!access_ok(VERIFY_WRITE, to, n))
 263                 return n;
 264         memset(to, 0, n);
 265         return 0;
 266 }
 267
 268 #define clear_user(to, n) __clear_user(to, n)
 269
 270 /* How to interpret these return values:
 271  *      CORE:      can be accessed by core load or dma memcpy
 272  *      CORE_ONLY: can only be accessed by core load
 273  *      DMA:       can only be accessed by dma memcpy
 274  *      IDMA:      can only be accessed by interprocessor dma memcpy (BF561)
 275  *      ITEST:     can be accessed by isram memcpy or dma memcpy
 276  */
 277 enum {
 278         BFIN_MEM_ACCESS_CORE = 0,
 279         BFIN_MEM_ACCESS_CORE_ONLY,
 280         BFIN_MEM_ACCESS_DMA,
 281         BFIN_MEM_ACCESS_IDMA,
 282         BFIN_MEM_ACCESS_ITEST,
 283 };
 284 /**
 285  *      bfin_mem_access_type() - what kind of memory access is required
 286  *      @addr:   the address to check
 287  *      @size:   number of bytes needed
 288  *      @return: <0 is error, >=0 is BFIN_MEM_ACCESS_xxx enum (see above)
 289  */
 290 int bfin_mem_access_type(unsigned long addr, unsigned long size);
 291
 292 #endif                          /* _BLACKFIN_UACCESS_H */