Merge branch 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6
[pandora-kernel.git] / arch / arm / plat-spear / time.c
1 /*
2  * arch/arm/plat-spear/time.c
3  *
4  * Copyright (C) 2009 ST Microelectronics
5  * Shiraz Hashim<shiraz.hashim@st.com>
6  *
7  * This file is licensed under the terms of the GNU General Public
8  * License version 2. This program is licensed "as is" without any
9  * warranty of any kind, whether express or implied.
10  */
11
12 #include <linux/clk.h>
13 #include <linux/clockchips.h>
14 #include <linux/clocksource.h>
15 #include <linux/err.h>
16 #include <linux/init.h>
17 #include <linux/interrupt.h>
18 #include <linux/io.h>
19 #include <linux/kernel.h>
20 #include <linux/time.h>
21 #include <linux/irq.h>
22 #include <asm/mach/time.h>
23 #include <mach/irqs.h>
24 #include <mach/hardware.h>
25 #include <mach/spear.h>
26 #include <mach/generic.h>
27
28 /*
29  * We would use TIMER0 and TIMER1 as clockevent and clocksource.
30  * Timer0 and Timer1 both belong to same gpt block in cpu subbsystem. Further
31  * they share same functional clock. Any change in one's functional clock will
32  * also affect other timer.
33  */
34
35 #define CLKEVT  0       /* gpt0, channel0 as clockevent */
36 #define CLKSRC  1       /* gpt0, channel1 as clocksource */
37
38 /* Register offsets, x is channel number */
39 #define CR(x)           ((x) * 0x80 + 0x80)
40 #define IR(x)           ((x) * 0x80 + 0x84)
41 #define LOAD(x)         ((x) * 0x80 + 0x88)
42 #define COUNT(x)        ((x) * 0x80 + 0x8C)
43
44 /* Reg bit definitions */
45 #define CTRL_INT_ENABLE         0x0100
46 #define CTRL_ENABLE             0x0020
47 #define CTRL_ONE_SHOT           0x0010
48
49 #define CTRL_PRESCALER1         0x0
50 #define CTRL_PRESCALER2         0x1
51 #define CTRL_PRESCALER4         0x2
52 #define CTRL_PRESCALER8         0x3
53 #define CTRL_PRESCALER16        0x4
54 #define CTRL_PRESCALER32        0x5
55 #define CTRL_PRESCALER64        0x6
56 #define CTRL_PRESCALER128       0x7
57 #define CTRL_PRESCALER256       0x8
58
59 #define INT_STATUS              0x1
60
61 /*
62  * Minimum clocksource/clockevent timer range in seconds
63  */
64 #define SPEAR_MIN_RANGE 4
65
66 static __iomem void *gpt_base;
67 static struct clk *gpt_clk;
68
69 static void clockevent_set_mode(enum clock_event_mode mode,
70                                 struct clock_event_device *clk_event_dev);
71 static int clockevent_next_event(unsigned long evt,
72                                  struct clock_event_device *clk_event_dev);
73
74 static cycle_t clocksource_read_cycles(struct clocksource *cs)
75 {
76         return (cycle_t) readw(gpt_base + COUNT(CLKSRC));
77 }
78
79 static struct clocksource clksrc = {
80         .name = "tmr1",
81         .rating = 200,          /* its a pretty decent clock */
82         .read = clocksource_read_cycles,
83         .mask = 0xFFFF,         /* 16 bits */
84         .flags = CLOCK_SOURCE_IS_CONTINUOUS,
85 };
86
87 static void spear_clocksource_init(void)
88 {
89         u32 tick_rate;
90         u16 val;
91
92         /* program the prescaler (/256)*/
93         writew(CTRL_PRESCALER256, gpt_base + CR(CLKSRC));
94
95         /* find out actual clock driving Timer */
96         tick_rate = clk_get_rate(gpt_clk);
97         tick_rate >>= CTRL_PRESCALER256;
98
99         writew(0xFFFF, gpt_base + LOAD(CLKSRC));
100
101         val = readw(gpt_base + CR(CLKSRC));
102         val &= ~CTRL_ONE_SHOT;  /* autoreload mode */
103         val |= CTRL_ENABLE ;
104         writew(val, gpt_base + CR(CLKSRC));
105
106         /* register the clocksource */
107         clocksource_register_hz(&clksrc, tick_rate);
108 }
109
110 static struct clock_event_device clkevt = {
111         .name = "tmr0",
112         .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
113         .set_mode = clockevent_set_mode,
114         .set_next_event = clockevent_next_event,
115         .shift = 0,     /* to be computed */
116 };
117
118 static void clockevent_set_mode(enum clock_event_mode mode,
119                                 struct clock_event_device *clk_event_dev)
120 {
121         u32 period;
122         u16 val;
123
124         /* stop the timer */
125         val = readw(gpt_base + CR(CLKEVT));
126         val &= ~CTRL_ENABLE;
127         writew(val, gpt_base + CR(CLKEVT));
128
129         switch (mode) {
130         case CLOCK_EVT_MODE_PERIODIC:
131                 period = clk_get_rate(gpt_clk) / HZ;
132                 period >>= CTRL_PRESCALER16;
133                 writew(period, gpt_base + LOAD(CLKEVT));
134
135                 val = readw(gpt_base + CR(CLKEVT));
136                 val &= ~CTRL_ONE_SHOT;
137                 val |= CTRL_ENABLE | CTRL_INT_ENABLE;
138                 writew(val, gpt_base + CR(CLKEVT));
139
140                 break;
141         case CLOCK_EVT_MODE_ONESHOT:
142                 val = readw(gpt_base + CR(CLKEVT));
143                 val |= CTRL_ONE_SHOT;
144                 writew(val, gpt_base + CR(CLKEVT));
145
146                 break;
147         case CLOCK_EVT_MODE_UNUSED:
148         case CLOCK_EVT_MODE_SHUTDOWN:
149         case CLOCK_EVT_MODE_RESUME:
150
151                 break;
152         default:
153                 pr_err("Invalid mode requested\n");
154                 break;
155         }
156 }
157
158 static int clockevent_next_event(unsigned long cycles,
159                                  struct clock_event_device *clk_event_dev)
160 {
161         u16 val;
162
163         writew(cycles, gpt_base + LOAD(CLKEVT));
164
165         val = readw(gpt_base + CR(CLKEVT));
166         val |= CTRL_ENABLE | CTRL_INT_ENABLE;
167         writew(val, gpt_base + CR(CLKEVT));
168
169         return 0;
170 }
171
172 static irqreturn_t spear_timer_interrupt(int irq, void *dev_id)
173 {
174         struct clock_event_device *evt = &clkevt;
175
176         writew(INT_STATUS, gpt_base + IR(CLKEVT));
177
178         evt->event_handler(evt);
179
180         return IRQ_HANDLED;
181 }
182
183 static struct irqaction spear_timer_irq = {
184         .name = "timer",
185         .flags = IRQF_DISABLED | IRQF_TIMER,
186         .handler = spear_timer_interrupt
187 };
188
189 static void __init spear_clockevent_init(void)
190 {
191         u32 tick_rate;
192
193         /* program the prescaler */
194         writew(CTRL_PRESCALER16, gpt_base + CR(CLKEVT));
195
196         tick_rate = clk_get_rate(gpt_clk);
197         tick_rate >>= CTRL_PRESCALER16;
198
199         clockevents_calc_mult_shift(&clkevt, tick_rate, SPEAR_MIN_RANGE);
200
201         clkevt.max_delta_ns = clockevent_delta2ns(0xfff0,
202                         &clkevt);
203         clkevt.min_delta_ns = clockevent_delta2ns(3, &clkevt);
204
205         clkevt.cpumask = cpumask_of(0);
206
207         clockevents_register_device(&clkevt);
208
209         setup_irq(SPEAR_GPT0_CHAN0_IRQ, &spear_timer_irq);
210 }
211
212 void __init spear_setup_timer(void)
213 {
214         struct clk *pll3_clk;
215
216         if (!request_mem_region(SPEAR_GPT0_BASE, SZ_1K, "gpt0")) {
217                 pr_err("%s:cannot get IO addr\n", __func__);
218                 return;
219         }
220
221         gpt_base = (void __iomem *)ioremap(SPEAR_GPT0_BASE, SZ_1K);
222         if (!gpt_base) {
223                 pr_err("%s:ioremap failed for gpt\n", __func__);
224                 goto err_mem;
225         }
226
227         gpt_clk = clk_get_sys("gpt0", NULL);
228         if (!gpt_clk) {
229                 pr_err("%s:couldn't get clk for gpt\n", __func__);
230                 goto err_iomap;
231         }
232
233         pll3_clk = clk_get(NULL, "pll3_48m_clk");
234         if (!pll3_clk) {
235                 pr_err("%s:couldn't get PLL3 as parent for gpt\n", __func__);
236                 goto err_iomap;
237         }
238
239         clk_set_parent(gpt_clk, pll3_clk);
240
241         spear_clockevent_init();
242         spear_clocksource_init();
243
244         return;
245
246 err_iomap:
247         iounmap(gpt_base);
248
249 err_mem:
250         release_mem_region(SPEAR_GPT0_BASE, SZ_1K);
251 }
252
253 struct sys_timer spear_sys_timer = {
254         .init = spear_setup_timer,
255 };