Merge branch 'topic/hda' into for-linus
[pandora-kernel.git] / arch / arm / mm / proc-v6.S
1 /*
2  *  linux/arch/arm/mm/proc-v6.S
3  *
4  *  Copyright (C) 2001 Deep Blue Solutions Ltd.
5  *  Modified by Catalin Marinas for noMMU support
6  *
7  * This program is free software; you can redistribute it and/or modify
8  * it under the terms of the GNU General Public License version 2 as
9  * published by the Free Software Foundation.
10  *
11  *  This is the "shell" of the ARMv6 processor support.
12  */
13 #include <linux/init.h>
14 #include <linux/linkage.h>
15 #include <asm/assembler.h>
16 #include <asm/asm-offsets.h>
17 #include <asm/hwcap.h>
18 #include <asm/pgtable-hwdef.h>
19 #include <asm/pgtable.h>
20
21 #include "proc-macros.S"
22
23 #define D_CACHE_LINE_SIZE       32
24
25 #define TTB_C           (1 << 0)
26 #define TTB_S           (1 << 1)
27 #define TTB_IMP         (1 << 2)
28 #define TTB_RGN_NC      (0 << 3)
29 #define TTB_RGN_WBWA    (1 << 3)
30 #define TTB_RGN_WT      (2 << 3)
31 #define TTB_RGN_WB      (3 << 3)
32
33 #ifndef CONFIG_SMP
34 #define TTB_FLAGS       TTB_RGN_WBWA
35 #else
36 #define TTB_FLAGS       TTB_RGN_WBWA|TTB_S
37 #endif
38
39 ENTRY(cpu_v6_proc_init)
40         mov     pc, lr
41
42 ENTRY(cpu_v6_proc_fin)
43         stmfd   sp!, {lr}
44         cpsid   if                              @ disable interrupts
45         bl      v6_flush_kern_cache_all
46         mrc     p15, 0, r0, c1, c0, 0           @ ctrl register
47         bic     r0, r0, #0x1000                 @ ...i............
48         bic     r0, r0, #0x0006                 @ .............ca.
49         mcr     p15, 0, r0, c1, c0, 0           @ disable caches
50         ldmfd   sp!, {pc}
51
52 /*
53  *      cpu_v6_reset(loc)
54  *
55  *      Perform a soft reset of the system.  Put the CPU into the
56  *      same state as it would be if it had been reset, and branch
57  *      to what would be the reset vector.
58  *
59  *      - loc   - location to jump to for soft reset
60  *
61  *      It is assumed that:
62  */
63         .align  5
64 ENTRY(cpu_v6_reset)
65         mov     pc, r0
66
67 /*
68  *      cpu_v6_do_idle()
69  *
70  *      Idle the processor (eg, wait for interrupt).
71  *
72  *      IRQs are already disabled.
73  */
74 ENTRY(cpu_v6_do_idle)
75         mov     r1, #0
76         mcr     p15, 0, r1, c7, c10, 4          @ DWB - WFI may enter a low-power mode
77         mcr     p15, 0, r1, c7, c0, 4           @ wait for interrupt
78         mov     pc, lr
79
80 ENTRY(cpu_v6_dcache_clean_area)
81 #ifndef TLB_CAN_READ_FROM_L1_CACHE
82 1:      mcr     p15, 0, r0, c7, c10, 1          @ clean D entry
83         add     r0, r0, #D_CACHE_LINE_SIZE
84         subs    r1, r1, #D_CACHE_LINE_SIZE
85         bhi     1b
86 #endif
87         mov     pc, lr
88
89 /*
90  *      cpu_arm926_switch_mm(pgd_phys, tsk)
91  *
92  *      Set the translation table base pointer to be pgd_phys
93  *
94  *      - pgd_phys - physical address of new TTB
95  *
96  *      It is assumed that:
97  *      - we are not using split page tables
98  */
99 ENTRY(cpu_v6_switch_mm)
100 #ifdef CONFIG_MMU
101         mov     r2, #0
102         ldr     r1, [r1, #MM_CONTEXT_ID]        @ get mm->context.id
103         orr     r0, r0, #TTB_FLAGS
104         mcr     p15, 0, r2, c7, c5, 6           @ flush BTAC/BTB
105         mcr     p15, 0, r2, c7, c10, 4          @ drain write buffer
106         mcr     p15, 0, r0, c2, c0, 0           @ set TTB 0
107         mcr     p15, 0, r1, c13, c0, 1          @ set context ID
108 #endif
109         mov     pc, lr
110
111 /*
112  *      cpu_v6_set_pte_ext(ptep, pte, ext)
113  *
114  *      Set a level 2 translation table entry.
115  *
116  *      - ptep  - pointer to level 2 translation table entry
117  *                (hardware version is stored at -1024 bytes)
118  *      - pte   - PTE value to store
119  *      - ext   - value for extended PTE bits
120  */
121         armv6_mt_table cpu_v6
122
123 ENTRY(cpu_v6_set_pte_ext)
124 #ifdef CONFIG_MMU
125         armv6_set_pte_ext cpu_v6
126 #endif
127         mov     pc, lr
128
129
130
131
132 cpu_v6_name:
133         .asciz  "ARMv6-compatible processor"
134         .align
135
136         __INIT
137
138 /*
139  *      __v6_setup
140  *
141  *      Initialise TLB, Caches, and MMU state ready to switch the MMU
142  *      on.  Return in r0 the new CP15 C1 control register setting.
143  *
144  *      We automatically detect if we have a Harvard cache, and use the
145  *      Harvard cache control instructions insead of the unified cache
146  *      control instructions.
147  *
148  *      This should be able to cover all ARMv6 cores.
149  *
150  *      It is assumed that:
151  *      - cache type register is implemented
152  */
153 __v6_setup:
154 #ifdef CONFIG_SMP
155         mrc     p15, 0, r0, c1, c0, 1           @ Enable SMP/nAMP mode
156         orr     r0, r0, #0x20
157         mcr     p15, 0, r0, c1, c0, 1
158 #endif
159
160         mov     r0, #0
161         mcr     p15, 0, r0, c7, c14, 0          @ clean+invalidate D cache
162         mcr     p15, 0, r0, c7, c5, 0           @ invalidate I cache
163         mcr     p15, 0, r0, c7, c15, 0          @ clean+invalidate cache
164         mcr     p15, 0, r0, c7, c10, 4          @ drain write buffer
165 #ifdef CONFIG_MMU
166         mcr     p15, 0, r0, c8, c7, 0           @ invalidate I + D TLBs
167         mcr     p15, 0, r0, c2, c0, 2           @ TTB control register
168         orr     r4, r4, #TTB_FLAGS
169         mcr     p15, 0, r4, c2, c0, 1           @ load TTB1
170 #endif /* CONFIG_MMU */
171         adr     r5, v6_crval
172         ldmia   r5, {r5, r6}
173         mrc     p15, 0, r0, c1, c0, 0           @ read control register
174         bic     r0, r0, r5                      @ clear bits them
175         orr     r0, r0, r6                      @ set them
176         mov     pc, lr                          @ return to head.S:__ret
177
178         /*
179          *         V X F   I D LR
180          * .... ...E PUI. .T.T 4RVI ZFRS BLDP WCAM
181          * rrrr rrrx xxx0 0101 xxxx xxxx x111 xxxx < forced
182          *         0 110       0011 1.00 .111 1101 < we want
183          */
184         .type   v6_crval, #object
185 v6_crval:
186         crval   clear=0x01e0fb7f, mmuset=0x00c0387d, ucset=0x00c0187c
187
188         .type   v6_processor_functions, #object
189 ENTRY(v6_processor_functions)
190         .word   v6_early_abort
191         .word   pabort_noifar
192         .word   cpu_v6_proc_init
193         .word   cpu_v6_proc_fin
194         .word   cpu_v6_reset
195         .word   cpu_v6_do_idle
196         .word   cpu_v6_dcache_clean_area
197         .word   cpu_v6_switch_mm
198         .word   cpu_v6_set_pte_ext
199         .size   v6_processor_functions, . - v6_processor_functions
200
201         .type   cpu_arch_name, #object
202 cpu_arch_name:
203         .asciz  "armv6"
204         .size   cpu_arch_name, . - cpu_arch_name
205
206         .type   cpu_elf_name, #object
207 cpu_elf_name:
208         .asciz  "v6"
209         .size   cpu_elf_name, . - cpu_elf_name
210         .align
211
212         .section ".proc.info.init", #alloc, #execinstr
213
214         /*
215          * Match any ARMv6 processor core.
216          */
217         .type   __v6_proc_info, #object
218 __v6_proc_info:
219         .long   0x0007b000
220         .long   0x0007f000
221         .long   PMD_TYPE_SECT | \
222                 PMD_SECT_BUFFERABLE | \
223                 PMD_SECT_CACHEABLE | \
224                 PMD_SECT_AP_WRITE | \
225                 PMD_SECT_AP_READ
226         .long   PMD_TYPE_SECT | \
227                 PMD_SECT_XN | \
228                 PMD_SECT_AP_WRITE | \
229                 PMD_SECT_AP_READ
230         b       __v6_setup
231         .long   cpu_arch_name
232         .long   cpu_elf_name
233         .long   HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP|HWCAP_JAVA
234         .long   cpu_v6_name
235         .long   v6_processor_functions
236         .long   v6wbi_tlb_fns
237         .long   v6_user_fns
238         .long   v6_cache_fns
239         .size   __v6_proc_info, . - __v6_proc_info