arch/arm/mach-u300/include/mach/syscon.h

   1 /*
   2  *
   3  * arch/arm/mach-u300/include/mach/syscon.h
   4  *
   5  *
   6  * Copyright (C) 2008 ST-Ericsson AB
   7  *
   8  * Author: Rickard Andersson <rickard.andersson@stericsson.com>
   9  */
  10
  11 #ifndef __MACH_SYSCON_H
  12 #define __MACH_SYSCON_H
  13
  14 /*
  15  * All register defines for SYSCON registers that concerns individual
  16  * block clocks and reset lines are registered here. This is because
  17  * we don't want any other file to try to fool around with this stuff.
  18  */
  19
  20 /* APP side SYSCON registers */
  21 /* TODO: this is incomplete. Add all from asic_syscon_map.h eventually. */
  22 /* CLK Control Register 16bit (R/W) */
  23 #define U300_SYSCON_CCR                                         (0x0000)
  24 #define U300_SYSCON_CCR_I2S1_USE_VCXO                           (0x0040)
  25 #define U300_SYSCON_CCR_I2S0_USE_VCXO                           (0x0020)
  26 #define U300_SYSCON_CCR_TURN_VCXO_ON                            (0x0008)
  27 #define U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK                 (0x0007)
  28 #define U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER            (0x04)
  29 #define U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW                  (0x03)
  30 #define U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE         (0x02)
  31 #define U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH                 (0x01)
  32 #define U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST                 (0x00)
  33 /* CLK Status Register 16bit (R/W) */
  34 #define U300_SYSCON_CSR                                         (0x0004)
  35 #define U300_SYSCON_CSR_PLL208_LOCK_IND                         (0x0002)
  36 #define U300_SYSCON_CSR_PLL13_LOCK_IND                          (0x0001)
  37 /* Reset lines for SLOW devices 16bit (R/W) */
  38 #define U300_SYSCON_RSR                                         (0x0014)
  39 #ifdef CONFIG_MACH_U300_BS335
  40 #define U300_SYSCON_RSR_PPM_RESET_EN                            (0x0200)
  41 #endif
  42 #define U300_SYSCON_RSR_ACC_TMR_RESET_EN                        (0x0100)
  43 #define U300_SYSCON_RSR_APP_TMR_RESET_EN                        (0x0080)
  44 #define U300_SYSCON_RSR_RTC_RESET_EN                            (0x0040)
  45 #define U300_SYSCON_RSR_KEYPAD_RESET_EN                         (0x0020)
  46 #define U300_SYSCON_RSR_GPIO_RESET_EN                           (0x0010)
  47 #define U300_SYSCON_RSR_EH_RESET_EN                             (0x0008)
  48 #define U300_SYSCON_RSR_BTR_RESET_EN                            (0x0004)
  49 #define U300_SYSCON_RSR_UART_RESET_EN                           (0x0002)
  50 #define U300_SYSCON_RSR_SLOW_BRIDGE_RESET_EN                    (0x0001)
  51 /* Reset lines for FAST devices 16bit (R/W) */
  52 #define U300_SYSCON_RFR                                         (0x0018)
  53 #ifdef CONFIG_MACH_U300_BS335
  54 #define U300_SYSCON_RFR_UART1_RESET_ENABLE                      (0x0080)
  55 #endif
  56 #define U300_SYSCON_RFR_SPI_RESET_ENABLE                        (0x0040)
  57 #define U300_SYSCON_RFR_MMC_RESET_ENABLE                        (0x0020)
  58 #define U300_SYSCON_RFR_PCM_I2S1_RESET_ENABLE                   (0x0010)
  59 #define U300_SYSCON_RFR_PCM_I2S0_RESET_ENABLE                   (0x0008)
  60 #define U300_SYSCON_RFR_I2C1_RESET_ENABLE                       (0x0004)
  61 #define U300_SYSCON_RFR_I2C0_RESET_ENABLE                       (0x0002)
  62 #define U300_SYSCON_RFR_FAST_BRIDGE_RESET_ENABLE                (0x0001)
  63 /* Reset lines for the rest of the peripherals 16bit (R/W) */
  64 #define U300_SYSCON_RRR                                         (0x001c)
  65 #ifdef CONFIG_MACH_U300_BS335
  66 #define U300_SYSCON_RRR_CDS_RESET_EN                            (0x4000)
  67 #define U300_SYSCON_RRR_ISP_RESET_EN                            (0x2000)
  68 #endif
  69 #define U300_SYSCON_RRR_INTCON_RESET_EN                         (0x1000)
  70 #define U300_SYSCON_RRR_MSPRO_RESET_EN                          (0x0800)
  71 #define U300_SYSCON_RRR_XGAM_RESET_EN                           (0x0100)
  72 #define U300_SYSCON_RRR_XGAM_VC_SYNC_RESET_EN                   (0x0080)
  73 #define U300_SYSCON_RRR_NANDIF_RESET_EN                         (0x0040)
  74 #define U300_SYSCON_RRR_EMIF_RESET_EN                           (0x0020)
  75 #define U300_SYSCON_RRR_DMAC_RESET_EN                           (0x0010)
  76 #define U300_SYSCON_RRR_CPU_RESET_EN                            (0x0008)
  77 #define U300_SYSCON_RRR_APEX_RESET_EN                           (0x0004)
  78 #define U300_SYSCON_RRR_AHB_RESET_EN                            (0x0002)
  79 #define U300_SYSCON_RRR_AAIF_RESET_EN                           (0x0001)
  80 /* Clock enable for SLOW peripherals 16bit (R/W) */
  81 #define U300_SYSCON_CESR                                        (0x0020)
  82 #ifdef CONFIG_MACH_U300_BS335
  83 #define U300_SYSCON_CESR_PPM_CLK_EN                             (0x0200)
  84 #endif
  85 #define U300_SYSCON_CESR_ACC_TMR_CLK_EN                         (0x0100)
  86 #define U300_SYSCON_CESR_APP_TMR_CLK_EN                         (0x0080)
  87 #define U300_SYSCON_CESR_KEYPAD_CLK_EN                          (0x0040)
  88 #define U300_SYSCON_CESR_GPIO_CLK_EN                            (0x0010)
  89 #define U300_SYSCON_CESR_EH_CLK_EN                              (0x0008)
  90 #define U300_SYSCON_CESR_BTR_CLK_EN                             (0x0004)
  91 #define U300_SYSCON_CESR_UART_CLK_EN                            (0x0002)
  92 #define U300_SYSCON_CESR_SLOW_BRIDGE_CLK_EN                     (0x0001)
  93 /* Clock enable for FAST peripherals 16bit (R/W) */
  94 #define U300_SYSCON_CEFR                                        (0x0024)
  95 #ifdef CONFIG_MACH_U300_BS335
  96 #define U300_SYSCON_CEFR_UART1_CLK_EN                           (0x0200)
  97 #endif
  98 #define U300_SYSCON_CEFR_I2S1_CORE_CLK_EN                       (0x0100)
  99 #define U300_SYSCON_CEFR_I2S0_CORE_CLK_EN                       (0x0080)
 100 #define U300_SYSCON_CEFR_SPI_CLK_EN                             (0x0040)
 101 #define U300_SYSCON_CEFR_MMC_CLK_EN                             (0x0020)
 102 #define U300_SYSCON_CEFR_I2S1_CLK_EN                            (0x0010)
 103 #define U300_SYSCON_CEFR_I2S0_CLK_EN                            (0x0008)
 104 #define U300_SYSCON_CEFR_I2C1_CLK_EN                            (0x0004)
 105 #define U300_SYSCON_CEFR_I2C0_CLK_EN                            (0x0002)
 106 #define U300_SYSCON_CEFR_FAST_BRIDGE_CLK_EN                     (0x0001)
 107 /* Clock enable for the rest of the peripherals 16bit (R/W) */
 108 #define U300_SYSCON_CERR                                        (0x0028)
 109 #ifdef CONFIG_MACH_U300_BS335
 110 #define U300_SYSCON_CERR_CDS_CLK_EN                             (0x2000)
 111 #define U300_SYSCON_CERR_ISP_CLK_EN                             (0x1000)
 112 #endif
 113 #define U300_SYSCON_CERR_MSPRO_CLK_EN                           (0x0800)
 114 #define U300_SYSCON_CERR_AHB_SUBSYS_BRIDGE_CLK_EN               (0x0400)
 115 #define U300_SYSCON_CERR_SEMI_CLK_EN                            (0x0200)
 116 #define U300_SYSCON_CERR_XGAM_CLK_EN                            (0x0100)
 117 #define U300_SYSCON_CERR_VIDEO_ENC_CLK_EN                       (0x0080)
 118 #define U300_SYSCON_CERR_NANDIF_CLK_EN                          (0x0040)
 119 #define U300_SYSCON_CERR_EMIF_CLK_EN                            (0x0020)
 120 #define U300_SYSCON_CERR_DMAC_CLK_EN                            (0x0010)
 121 #define U300_SYSCON_CERR_CPU_CLK_EN                             (0x0008)
 122 #define U300_SYSCON_CERR_APEX_CLK_EN                            (0x0004)
 123 #define U300_SYSCON_CERR_AHB_CLK_EN                             (0x0002)
 124 #define U300_SYSCON_CERR_AAIF_CLK_EN                            (0x0001)
 125 /* Single block clock enable 16bit (-/W) */
 126 #define U300_SYSCON_SBCER                                       (0x002c)
 127 #ifdef CONFIG_MACH_U300_BS335
 128 #define U300_SYSCON_SBCER_PPM_CLK_EN                            (0x0009)
 129 #endif
 130 #define U300_SYSCON_SBCER_ACC_TMR_CLK_EN                        (0x0008)
 131 #define U300_SYSCON_SBCER_APP_TMR_CLK_EN                        (0x0007)
 132 #define U300_SYSCON_SBCER_KEYPAD_CLK_EN                         (0x0006)
 133 #define U300_SYSCON_SBCER_GPIO_CLK_EN                           (0x0004)
 134 #define U300_SYSCON_SBCER_EH_CLK_EN                             (0x0003)
 135 #define U300_SYSCON_SBCER_BTR_CLK_EN                            (0x0002)
 136 #define U300_SYSCON_SBCER_UART_CLK_EN                           (0x0001)
 137 #define U300_SYSCON_SBCER_SLOW_BRIDGE_CLK_EN                    (0x0000)
 138 #ifdef CONFIG_MACH_U300_BS335
 139 #define U300_SYSCON_SBCER_UART1_CLK_EN                          (0x0019)
 140 #endif
 141 #define U300_SYSCON_SBCER_I2S1_CORE_CLK_EN                      (0x0018)
 142 #define U300_SYSCON_SBCER_I2S0_CORE_CLK_EN                      (0x0017)
 143 #define U300_SYSCON_SBCER_SPI_CLK_EN                            (0x0016)
 144 #define U300_SYSCON_SBCER_MMC_CLK_EN                            (0x0015)
 145 #define U300_SYSCON_SBCER_I2S1_CLK_EN                           (0x0014)
 146 #define U300_SYSCON_SBCER_I2S0_CLK_EN                           (0x0013)
 147 #define U300_SYSCON_SBCER_I2C1_CLK_EN                           (0x0012)
 148 #define U300_SYSCON_SBCER_I2C0_CLK_EN                           (0x0011)
 149 #define U300_SYSCON_SBCER_FAST_BRIDGE_CLK_EN                    (0x0010)
 150 #ifdef CONFIG_MACH_U300_BS335
 151 #define U300_SYSCON_SBCER_CDS_CLK_EN                            (0x002D)
 152 #define U300_SYSCON_SBCER_ISP_CLK_EN                            (0x002C)
 153 #endif
 154 #define U300_SYSCON_SBCER_MSPRO_CLK_EN                          (0x002B)
 155 #define U300_SYSCON_SBCER_AHB_SUBSYS_BRIDGE_CLK_EN              (0x002A)
 156 #define U300_SYSCON_SBCER_SEMI_CLK_EN                           (0x0029)
 157 #define U300_SYSCON_SBCER_XGAM_CLK_EN                           (0x0028)
 158 #define U300_SYSCON_SBCER_VIDEO_ENC_CLK_EN                      (0x0027)
 159 #define U300_SYSCON_SBCER_NANDIF_CLK_EN                         (0x0026)
 160 #define U300_SYSCON_SBCER_EMIF_CLK_EN                           (0x0025)
 161 #define U300_SYSCON_SBCER_DMAC_CLK_EN                           (0x0024)
 162 #define U300_SYSCON_SBCER_CPU_CLK_EN                            (0x0023)
 163 #define U300_SYSCON_SBCER_APEX_CLK_EN                           (0x0022)
 164 #define U300_SYSCON_SBCER_AHB_CLK_EN                            (0x0021)
 165 #define U300_SYSCON_SBCER_AAIF_CLK_EN                           (0x0020)
 166 /* Single block clock disable 16bit (-/W) */
 167 #define U300_SYSCON_SBCDR                                       (0x0030)
 168 /* Same values as above for SBCER */
 169 /* Clock force SLOW peripherals 16bit (R/W) */
 170 #define U300_SYSCON_CFSR                                        (0x003c)
 171 #ifdef CONFIG_MACH_U300_BS335
 172 #define U300_SYSCON_CFSR_PPM_CLK_FORCE_EN                       (0x0200)
 173 #endif
 174 #define U300_SYSCON_CFSR_ACC_TMR_CLK_FORCE_EN                   (0x0100)
 175 #define U300_SYSCON_CFSR_APP_TMR_CLK_FORCE_EN                   (0x0080)
 176 #define U300_SYSCON_CFSR_KEYPAD_CLK_FORCE_EN                    (0x0020)
 177 #define U300_SYSCON_CFSR_GPIO_CLK_FORCE_EN                      (0x0010)
 178 #define U300_SYSCON_CFSR_EH_CLK_FORCE_EN                        (0x0008)
 179 #define U300_SYSCON_CFSR_BTR_CLK_FORCE_EN                       (0x0004)
 180 #define U300_SYSCON_CFSR_UART_CLK_FORCE_EN                      (0x0002)
 181 #define U300_SYSCON_CFSR_SLOW_BRIDGE_CLK_FORCE_EN               (0x0001)
 182 /* Clock force FAST peripherals 16bit (R/W) */
 183 #define U300_SYSCON_CFFR                                        (0x40)
 184 /* Values not defined. Define if you want to use them. */
 185 /* Clock force the rest of the peripherals 16bit (R/W) */
 186 #define U300_SYSCON_CFRR                                        (0x44)
 187 #ifdef CONFIG_MACH_U300_BS335
 188 #define U300_SYSCON_CFRR_CDS_CLK_FORCE_EN                       (0x2000)
 189 #define U300_SYSCON_CFRR_ISP_CLK_FORCE_EN                       (0x1000)
 190 #endif
 191 #define U300_SYSCON_CFRR_MSPRO_CLK_FORCE_EN                     (0x0800)
 192 #define U300_SYSCON_CFRR_AHB_SUBSYS_BRIDGE_CLK_FORCE_EN         (0x0400)
 193 #define U300_SYSCON_CFRR_SEMI_CLK_FORCE_EN                      (0x0200)
 194 #define U300_SYSCON_CFRR_XGAM_CLK_FORCE_EN                      (0x0100)
 195 #define U300_SYSCON_CFRR_VIDEO_ENC_CLK_FORCE_EN                 (0x0080)
 196 #define U300_SYSCON_CFRR_NANDIF_CLK_FORCE_EN                    (0x0040)
 197 #define U300_SYSCON_CFRR_EMIF_CLK_FORCE_EN                      (0x0020)
 198 #define U300_SYSCON_CFRR_DMAC_CLK_FORCE_EN                      (0x0010)
 199 #define U300_SYSCON_CFRR_CPU_CLK_FORCE_EN                       (0x0008)
 200 #define U300_SYSCON_CFRR_APEX_CLK_FORCE_EN                      (0x0004)
 201 #define U300_SYSCON_CFRR_AHB_CLK_FORCE_EN                       (0x0002)
 202 #define U300_SYSCON_CFRR_AAIF_CLK_FORCE_EN                      (0x0001)
 203 /* PLL208 Frequency Control 16bit (R/W) */
 204 #define U300_SYSCON_PFCR                                        (0x48)
 205 #define U300_SYSCON_PFCR_DPLL_MULT_NUM                          (0x000F)
 206 /* Power Management Control 16bit (R/W) */
 207 #define U300_SYSCON_PMCR                                        (0x50)
 208 #define U300_SYSCON_PMCR_DCON_ENABLE                            (0x0002)
 209 #define U300_SYSCON_PMCR_PWR_MGNT_ENABLE                        (0x0001)
 210 /*
 211  * All other clocking registers moved to clock.c!
 212  */
 213 /* Reset Out 16bit (R/W) */
 214 #define U300_SYSCON_RCR                                         (0x6c)
 215 #define U300_SYSCON_RCR_RESOUT0_RST_N_DISABLE                   (0x0001)
 216 /* EMIF Slew Rate Control 16bit (R/W) */
 217 #define U300_SYSCON_SRCLR                                       (0x70)
 218 #define U300_SYSCON_SRCLR_MASK                                  (0x03FF)
 219 #define U300_SYSCON_SRCLR_VALUE                                 (0x03FF)
 220 #define U300_SYSCON_SRCLR_EMIF_1_SLRC_5_B                       (0x0200)
 221 #define U300_SYSCON_SRCLR_EMIF_1_SLRC_5_A                       (0x0100)
 222 #define U300_SYSCON_SRCLR_EMIF_1_SLRC_4_B                       (0x0080)
 223 #define U300_SYSCON_SRCLR_EMIF_1_SLRC_4_A                       (0x0040)
 224 #define U300_SYSCON_SRCLR_EMIF_1_SLRC_3_B                       (0x0020)
 225 #define U300_SYSCON_SRCLR_EMIF_1_SLRC_3_A                       (0x0010)
 226 #define U300_SYSCON_SRCLR_EMIF_1_SLRC_2_B                       (0x0008)
 227 #define U300_SYSCON_SRCLR_EMIF_1_SLRC_2_A                       (0x0004)
 228 #define U300_SYSCON_SRCLR_EMIF_1_SLRC_1_B                       (0x0002)
 229 #define U300_SYSCON_SRCLR_EMIF_1_SLRC_1_A                       (0x0001)
 230 /* EMIF Clock Control Register 16bit (R/W) */
 231 #define U300_SYSCON_ECCR                                        (0x0078)
 232 #define U300_SYSCON_ECCR_MASK                                   (0x000F)
 233 #define U300_SYSCON_ECCR_EMIF_1_STATIC_CLK_EN_N_DISABLE         (0x0008)
 234 #define U300_SYSCON_ECCR_EMIF_1_RET_OUT_CLK_EN_N_DISABLE        (0x0004)
 235 #define U300_SYSCON_ECCR_EMIF_MEMCLK_RET_EN_N_DISABLE           (0x0002)
 236 #define U300_SYSCON_ECCR_EMIF_SDRCLK_RET_EN_N_DISABLE           (0x0001)
 237 /* Step one for killing the applications system 16bit (-/W) */
 238 #define U300_SYSCON_KA1R                                        (0x0080)
 239 #define U300_SYSCON_KA1R_MASK                                   (0xFFFF)
 240 #define U300_SYSCON_KA1R_VALUE                                  (0xFFFF)
 241 /* Step two for killing the application system 16bit (-/W) */
 242 #define U300_SYSCON_KA2R                                        (0x0084)
 243 #define U300_SYSCON_KA2R_MASK                                   (0xFFFF)
 244 #define U300_SYSCON_KA2R_VALUE                                  (0xFFFF)
 245 /* MMC/MSPRO frequency divider register 0 16bit (R/W) */
 246 #define U300_SYSCON_MMF0R                                       (0x90)
 247 #define U300_SYSCON_MMF0R_MASK                                  (0x00FF)
 248 #define U300_SYSCON_MMF0R_FREQ_0_HIGH_MASK                      (0x00F0)
 249 #define U300_SYSCON_MMF0R_FREQ_0_LOW_MASK                       (0x000F)
 250 /* MMC/MSPRO frequency divider register 1 16bit (R/W) */
 251 #define U300_SYSCON_MMF1R                                       (0x94)
 252 #define U300_SYSCON_MMF1R_MASK                                  (0x00FF)
 253 #define U300_SYSCON_MMF1R_FREQ_1_HIGH_MASK                      (0x00F0)
 254 #define U300_SYSCON_MMF1R_FREQ_1_LOW_MASK                       (0x000F)
 255 /* AAIF control register 16 bit (R/W) */
 256 #define U300_SYSCON_AAIFCR                                      (0x98)
 257 #define U300_SYSCON_AAIFCR_MASK                                 (0x0003)
 258 #define U300_SYSCON_AAIFCR_AASW_CTRL_MASK                       (0x0003)
 259 #define U300_SYSCON_AAIFCR_AASW_CTRL_FUNCTIONAL                 (0x0000)
 260 #define U300_SYSCON_AAIFCR_AASW_CTRL_MONITORING                 (0x0001)
 261 #define U300_SYSCON_AAIFCR_AASW_CTRL_ACC_TO_EXT                 (0x0002)
 262 #define U300_SYSCON_AAIFCR_AASW_CTRL_APP_TO_EXT                 (0x0003)
 263 /* Clock control for the MMC and MSPRO blocks 16bit (R/W) */
 264 #define U300_SYSCON_MMCR                                        (0x9C)
 265 #define U300_SYSCON_MMCR_MASK                                   (0x0003)
 266 #define U300_SYSCON_MMCR_MMC_FB_CLK_SEL_ENABLE                  (0x0002)
 267 #define U300_SYSCON_MMCR_MSPRO_FREQSEL_ENABLE                   (0x0001)
 268 /* Pull up/down control (R/W) */
 269 #define U300_SYSCON_PUCR                                        (0x104)
 270 #define U300_SYSCON_PUCR_EMIF_1_WAIT_N_PU_ENABLE                (0x0200)
 271 #define U300_SYSCON_PUCR_EMIF_1_NFIF_READY_PU_ENABLE            (0x0100)
 272 #define U300_SYSCON_PUCR_EMIF_1_16BIT_PU_ENABLE                 (0x0080)
 273 #define U300_SYSCON_PUCR_EMIF_1_8BIT_PU_ENABLE                  (0x0040)
 274 #define U300_SYSCON_PUCR_KEY_IN_PU_EN_MASK                      (0x003F)
 275 /* SYS_0_CLK_CONTROL first clock control 16bit (R/W) */
 276 #define U300_SYSCON_S0CCR                                       (0x120)
 277 #define U300_SYSCON_S0CCR_FIELD_MASK                            (0x43FF)
 278 #define U300_SYSCON_S0CCR_CLOCK_REQ                             (0x4000)
 279 #define U300_SYSCON_S0CCR_CLOCK_REQ_MONITOR                     (0x2000)
 280 #define U300_SYSCON_S0CCR_CLOCK_INV                             (0x0200)
 281 #define U300_SYSCON_S0CCR_CLOCK_FREQ_MASK                       (0x01E0)
 282 #define U300_SYSCON_S0CCR_CLOCK_SELECT_MASK                     (0x001E)
 283 #define U300_SYSCON_S0CCR_CLOCK_ENABLE                          (0x0001)
 284 #define U300_SYSCON_S0CCR_SEL_MCLK                              (0x8<<1)
 285 #define U300_SYSCON_S0CCR_SEL_ACC_FSM_CLK                       (0xA<<1)
 286 #define U300_SYSCON_S0CCR_SEL_PLL60_48_CLK                      (0xC<<1)
 287 #define U300_SYSCON_S0CCR_SEL_PLL60_60_CLK                      (0xD<<1)
 288 #define U300_SYSCON_S0CCR_SEL_ACC_PLL208_CLK                    (0xE<<1)
 289 #define U300_SYSCON_S0CCR_SEL_APP_PLL13_CLK                     (0x0<<1)
 290 #define U300_SYSCON_S0CCR_SEL_APP_FSM_CLK                       (0x2<<1)
 291 #define U300_SYSCON_S0CCR_SEL_RTC_CLK                           (0x4<<1)
 292 #define U300_SYSCON_S0CCR_SEL_APP_PLL208_CLK                    (0x6<<1)
 293 /* SYS_1_CLK_CONTROL second clock control 16 bit (R/W) */
 294 #define U300_SYSCON_S1CCR                                       (0x124)
 295 #define U300_SYSCON_S1CCR_FIELD_MASK                            (0x43FF)
 296 #define U300_SYSCON_S1CCR_CLOCK_REQ                             (0x4000)
 297 #define U300_SYSCON_S1CCR_CLOCK_REQ_MONITOR                     (0x2000)
 298 #define U300_SYSCON_S1CCR_CLOCK_INV                             (0x0200)
 299 #define U300_SYSCON_S1CCR_CLOCK_FREQ_MASK                       (0x01E0)
 300 #define U300_SYSCON_S1CCR_CLOCK_SELECT_MASK                     (0x001E)
 301 #define U300_SYSCON_S1CCR_CLOCK_ENABLE                          (0x0001)
 302 #define U300_SYSCON_S1CCR_SEL_MCLK                              (0x8<<1)
 303 #define U300_SYSCON_S1CCR_SEL_ACC_FSM_CLK                       (0xA<<1)
 304 #define U300_SYSCON_S1CCR_SEL_PLL60_48_CLK                      (0xC<<1)
 305 #define U300_SYSCON_S1CCR_SEL_PLL60_60_CLK                      (0xD<<1)
 306 #define U300_SYSCON_S1CCR_SEL_ACC_PLL208_CLK                    (0xE<<1)
 307 #define U300_SYSCON_S1CCR_SEL_ACC_PLL13_CLK                     (0x0<<1)
 308 #define U300_SYSCON_S1CCR_SEL_APP_FSM_CLK                       (0x2<<1)
 309 #define U300_SYSCON_S1CCR_SEL_RTC_CLK                           (0x4<<1)
 310 #define U300_SYSCON_S1CCR_SEL_APP_PLL208_CLK                    (0x6<<1)
 311 /* SYS_2_CLK_CONTROL third clock contol 16 bit (R/W) */
 312 #define U300_SYSCON_S2CCR                                       (0x128)
 313 #define U300_SYSCON_S2CCR_FIELD_MASK                            (0xC3FF)
 314 #define U300_SYSCON_S2CCR_CLK_STEAL                             (0x8000)
 315 #define U300_SYSCON_S2CCR_CLOCK_REQ                             (0x4000)
 316 #define U300_SYSCON_S2CCR_CLOCK_REQ_MONITOR                     (0x2000)
 317 #define U300_SYSCON_S2CCR_CLOCK_INV                             (0x0200)
 318 #define U300_SYSCON_S2CCR_CLOCK_FREQ_MASK                       (0x01E0)
 319 #define U300_SYSCON_S2CCR_CLOCK_SELECT_MASK                     (0x001E)
 320 #define U300_SYSCON_S2CCR_CLOCK_ENABLE                          (0x0001)
 321 #define U300_SYSCON_S2CCR_SEL_MCLK                              (0x8<<1)
 322 #define U300_SYSCON_S2CCR_SEL_ACC_FSM_CLK                       (0xA<<1)
 323 #define U300_SYSCON_S2CCR_SEL_PLL60_48_CLK                      (0xC<<1)
 324 #define U300_SYSCON_S2CCR_SEL_PLL60_60_CLK                      (0xD<<1)
 325 #define U300_SYSCON_S2CCR_SEL_ACC_PLL208_CLK                    (0xE<<1)
 326 #define U300_SYSCON_S2CCR_SEL_ACC_PLL13_CLK                     (0x0<<1)
 327 #define U300_SYSCON_S2CCR_SEL_APP_FSM_CLK                       (0x2<<1)
 328 #define U300_SYSCON_S2CCR_SEL_RTC_CLK                           (0x4<<1)
 329 #define U300_SYSCON_S2CCR_SEL_APP_PLL208_CLK                    (0x6<<1)
 330 /* SYS_MISC_CONTROL, miscellaneous 16bit (R/W) */
 331 #define U300_SYSCON_MCR                                         (0x12c)
 332 #define U300_SYSCON_MCR_FIELD_MASK                              (0x00FF)
 333 #define U300_SYSCON_MCR_PMGEN_CR_4_MASK                         (0x00C0)
 334 #define U300_SYSCON_MCR_PMGEN_CR_4_GPIO                         (0x0000)
 335 #define U300_SYSCON_MCR_PMGEN_CR_4_SPI                          (0x0040)
 336 #define U300_SYSCON_MCR_PMGEN_CR_4_AAIF                         (0x00C0)
 337 #define U300_SYSCON_MCR_PMGEN_CR_2_MASK                         (0x0030)
 338 #define U300_SYSCON_MCR_PMGEN_CR_2_GPIO                         (0x0000)
 339 #define U300_SYSCON_MCR_PMGEN_CR_2_EMIF_1_STATIC                (0x0010)
 340 #define U300_SYSCON_MCR_PMGEN_CR_2_DSP                          (0x0020)
 341 #define U300_SYSCON_MCR_PMGEN_CR_2_AAIF                         (0x0030)
 342 #define U300_SYSCON_MCR_PMGEN_CR_0_MASK                         (0x000C)
 343 #define U300_SYSCON_MCR_PMGEN_CR_0_EMIF_1_SDRAM_M1              (0x0000)
 344 #define U300_SYSCON_MCR_PMGEN_CR_0_EMIF_1_SDRAM_M2              (0x0004)
 345 #define U300_SYSCON_MCR_PMGEN_CR_0_EMIF_1_SDRAM_M3              (0x0008)
 346 #define U300_SYSCON_MCR_PMGEN_CR_0_EMIF_0_SDRAM                 (0x000C)
 347 #define U300_SYSCON_MCR_PM1G_MODE_ENABLE                        (0x0002)
 348 #define U300_SYSCON_MCR_PMTG5_MODE_ENABLE                       (0x0001)
 349 /* SC_PLL_IRQ_CONTROL 16bit (R/W) */
 350 #define U300_SYSCON_PICR                                        (0x0130)
 351 #define U300_SYSCON_PICR_MASK                                   (0x00FF)
 352 #define U300_SYSCON_PICR_FORCE_PLL208_LOCK_LOW_ENABLE           (0x0080)
 353 #define U300_SYSCON_PICR_FORCE_PLL208_LOCK_HIGH_ENABLE          (0x0040)
 354 #define U300_SYSCON_PICR_FORCE_PLL13_LOCK_LOW_ENABLE            (0x0020)
 355 #define U300_SYSCON_PICR_FORCE_PLL13_LOCK_HIGH_ENABLE           (0x0010)
 356 #define U300_SYSCON_PICR_IRQMASK_PLL13_UNLOCK_ENABLE            (0x0008)
 357 #define U300_SYSCON_PICR_IRQMASK_PLL13_LOCK_ENABLE              (0x0004)
 358 #define U300_SYSCON_PICR_IRQMASK_PLL208_UNLOCK_ENABLE           (0x0002)
 359 #define U300_SYSCON_PICR_IRQMASK_PLL208_LOCK_ENABLE             (0x0001)
 360 /* SC_PLL_IRQ_STATUS 16 bit (R/-) */
 361 #define U300_SYSCON_PISR                                        (0x0134)
 362 #define U300_SYSCON_PISR_MASK                                   (0x000F)
 363 #define U300_SYSCON_PISR_PLL13_UNLOCK_IND                       (0x0008)
 364 #define U300_SYSCON_PISR_PLL13_LOCK_IND                         (0x0004)
 365 #define U300_SYSCON_PISR_PLL208_UNLOCK_IND                      (0x0002)
 366 #define U300_SYSCON_PISR_PLL208_LOCK_IND                        (0x0001)
 367 /* SC_PLL_IRQ_CLEAR 16 bit (-/W) */
 368 #define U300_SYSCON_PICLR                                       (0x0138)
 369 #define U300_SYSCON_PICLR_MASK                                  (0x000F)
 370 #define U300_SYSCON_PICLR_RWMASK                                (0x0000)
 371 #define U300_SYSCON_PICLR_PLL13_UNLOCK_SC                       (0x0008)
 372 #define U300_SYSCON_PICLR_PLL13_LOCK_SC                         (0x0004)
 373 #define U300_SYSCON_PICLR_PLL208_UNLOCK_SC                      (0x0002)
 374 #define U300_SYSCON_PICLR_PLL208_LOCK_SC                        (0x0001)
 375 /* CAMIF_CONTROL 16 bit (-/W) */
 376 #define U300_SYSCON_CICR                                        (0x013C)
 377 #define U300_SYSCON_CICR_MASK                                   (0x0FFF)
 378 #define U300_SYSCON_CICR_APP_SUBLVDS_TESTMODE_MASK              (0x0F00)
 379 #define U300_SYSCON_CICR_APP_SUBLVDS_TESTMODE_PORT1             (0x0C00)
 380 #define U300_SYSCON_CICR_APP_SUBLVDS_TESTMODE_PORT0             (0x0300)
 381 #define U300_SYSCON_CICR_APP_SUBLVDS_RESCON_MASK                (0x00F0)
 382 #define U300_SYSCON_CICR_APP_SUBLVDS_RESCON_PORT1               (0x00C0)
 383 #define U300_SYSCON_CICR_APP_SUBLVDS_RESCON_PORT0               (0x0030)
 384 #define U300_SYSCON_CICR_APP_SUBLVDS_PWR_DWN_N_MASK             (0x000F)
 385 #define U300_SYSCON_CICR_APP_SUBLVDS_PWR_DWN_N_PORT1            (0x000C)
 386 #define U300_SYSCON_CICR_APP_SUBLVDS_PWR_DWN_N_PORT0            (0x0003)
 387 /* Clock activity observability register 0 */
 388 #define U300_SYSCON_C0OAR                                       (0x140)
 389 #define U300_SYSCON_C0OAR_MASK                                  (0xFFFF)
 390 #define U300_SYSCON_C0OAR_VALUE                                 (0xFFFF)
 391 #define U300_SYSCON_C0OAR_BT_H_CLK                              (0x8000)
 392 #define U300_SYSCON_C0OAR_ASPB_P_CLK                            (0x4000)
 393 #define U300_SYSCON_C0OAR_APP_SEMI_H_CLK                        (0x2000)
 394 #define U300_SYSCON_C0OAR_APP_SEMI_CLK                          (0x1000)
 395 #define U300_SYSCON_C0OAR_APP_MMC_MSPRO_CLK                     (0x0800)
 396 #define U300_SYSCON_C0OAR_APP_I2S1_CLK                          (0x0400)
 397 #define U300_SYSCON_C0OAR_APP_I2S0_CLK                          (0x0200)
 398 #define U300_SYSCON_C0OAR_APP_CPU_CLK                           (0x0100)
 399 #define U300_SYSCON_C0OAR_APP_52_CLK                            (0x0080)
 400 #define U300_SYSCON_C0OAR_APP_208_CLK                           (0x0040)
 401 #define U300_SYSCON_C0OAR_APP_104_CLK                           (0x0020)
 402 #define U300_SYSCON_C0OAR_APEX_CLK                              (0x0010)
 403 #define U300_SYSCON_C0OAR_AHPB_M_H_CLK                          (0x0008)
 404 #define U300_SYSCON_C0OAR_AHB_CLK                               (0x0004)
 405 #define U300_SYSCON_C0OAR_AFPB_P_CLK                            (0x0002)
 406 #define U300_SYSCON_C0OAR_AAIF_CLK                              (0x0001)
 407 /* Clock activity observability register 1 */
 408 #define U300_SYSCON_C1OAR                                       (0x144)
 409 #define U300_SYSCON_C1OAR_MASK                                  (0x3FFE)
 410 #define U300_SYSCON_C1OAR_VALUE                                 (0x3FFE)
 411 #define U300_SYSCON_C1OAR_NFIF_F_CLK                            (0x2000)
 412 #define U300_SYSCON_C1OAR_MSPRO_CLK                             (0x1000)
 413 #define U300_SYSCON_C1OAR_MMC_P_CLK                             (0x0800)
 414 #define U300_SYSCON_C1OAR_MMC_CLK                               (0x0400)
 415 #define U300_SYSCON_C1OAR_KP_P_CLK                              (0x0200)
 416 #define U300_SYSCON_C1OAR_I2C1_P_CLK                            (0x0100)
 417 #define U300_SYSCON_C1OAR_I2C0_P_CLK                            (0x0080)
 418 #define U300_SYSCON_C1OAR_GPIO_CLK                              (0x0040)
 419 #define U300_SYSCON_C1OAR_EMIF_MPMC_CLK                         (0x0020)
 420 #define U300_SYSCON_C1OAR_EMIF_H_CLK                            (0x0010)
 421 #define U300_SYSCON_C1OAR_EVHIST_CLK                            (0x0008)
 422 #define U300_SYSCON_C1OAR_PPM_CLK                               (0x0004)
 423 #define U300_SYSCON_C1OAR_DMA_CLK                               (0x0002)
 424 /* Clock activity observability register 2 */
 425 #define U300_SYSCON_C2OAR                                       (0x148)
 426 #define U300_SYSCON_C2OAR_MASK                                  (0x0FFF)
 427 #define U300_SYSCON_C2OAR_VALUE                                 (0x0FFF)
 428 #define U300_SYSCON_C2OAR_XGAM_CDI_CLK                          (0x0800)
 429 #define U300_SYSCON_C2OAR_XGAM_CLK                              (0x0400)
 430 #define U300_SYSCON_C2OAR_VC_H_CLK                              (0x0200)
 431 #define U300_SYSCON_C2OAR_VC_CLK                                (0x0100)
 432 #define U300_SYSCON_C2OAR_UA_P_CLK                              (0x0080)
 433 #define U300_SYSCON_C2OAR_TMR1_CLK                              (0x0040)
 434 #define U300_SYSCON_C2OAR_TMR0_CLK                              (0x0020)
 435 #define U300_SYSCON_C2OAR_SPI_P_CLK                             (0x0010)
 436 #define U300_SYSCON_C2OAR_PCM_I2S1_CORE_CLK                     (0x0008)
 437 #define U300_SYSCON_C2OAR_PCM_I2S1_CLK                          (0x0004)
 438 #define U300_SYSCON_C2OAR_PCM_I2S0_CORE_CLK                     (0x0002)
 439 #define U300_SYSCON_C2OAR_PCM_I2S0_CLK                          (0x0001)
 440
 441 /* Chip ID register 16bit (R/-) */
 442 #define U300_SYSCON_CIDR                                        (0x400)
 443 /* Video IRQ clear 16bit (R/W) */
 444 #define U300_SYSCON_VICR                                        (0x404)
 445 #define U300_SYSCON_VICR_VIDEO1_IRQ_CLEAR_ENABLE                (0x0002)
 446 #define U300_SYSCON_VICR_VIDEO0_IRQ_CLEAR_ENABLE                (0x0001)
 447 /* SMCR */
 448 #define U300_SYSCON_SMCR                                        (0x4d0)
 449 #define U300_SYSCON_SMCR_FIELD_MASK                             (0x000e)
 450 #define U300_SYSCON_SMCR_SEMI_SREFACK_IND                       (0x0008)
 451 #define U300_SYSCON_SMCR_SEMI_SREFREQ_ENABLE                    (0x0004)
 452 #define U300_SYSCON_SMCR_SEMI_EXT_BOOT_MODE_ENABLE              (0x0002)
 453 /* CPU_SW_DBGEN Software Debug Enable 16bit (R/W) */
 454 #define U300_SYSCON_CSDR                                        (0x4f0)
 455 #define U300_SYSCON_CSDR_SW_DEBUG_ENABLE                        (0x0001)
 456 /* PRINT_CONTROL Print Control 16bit (R/-) */
 457 #define U300_SYSCON_PCR                                         (0x4f8)
 458 #define U300_SYSCON_PCR_SERV_IND                                (0x0001)
 459 /* BOOT_CONTROL 16bit (R/-) */
 460 #define U300_SYSCON_BCR                                         (0x4fc)
 461 #define U300_SYSCON_BCR_ACC_CPU_SUBSYS_VINITHI_IND              (0x0400)
 462 #define U300_SYSCON_BCR_APP_CPU_SUBSYS_VINITHI_IND              (0x0200)
 463 #define U300_SYSCON_BCR_EXTRA_BOOT_OPTION_MASK                  (0x01FC)
 464 #define U300_SYSCON_BCR_APP_BOOT_SERV_MASK                      (0x0003)
 465
 466
 467 /* CPU clock defines */
 468 /**
 469  * CPU high frequency in MHz
 470  */
 471 #define SYSCON_CPU_CLOCK_HIGH    208
 472 /**
 473  * CPU medium frequency in MHz
 474  */
 475 #define SYSCON_CPU_CLOCK_MEDIUM   52
 476 /**
 477  * CPU low frequency in MHz
 478  */
 479 #define SYSCON_CPU_CLOCK_LOW      13
 480
 481 /* EMIF clock defines */
 482 /**
 483  * EMIF high frequency in MHz
 484  */
 485 #define SYSCON_EMIF_CLOCK_HIGH   104
 486 /**
 487  * EMIF medium frequency in MHz
 488  */
 489 #define SYSCON_EMIF_CLOCK_MEDIUM  52
 490 /**
 491  * EMIF low frequency in MHz
 492  */
 493 #define SYSCON_EMIF_CLOCK_LOW     13
 494
 495 /* AHB clock defines */
 496 /**
 497  * AHB high frequency in MHz
 498  */
 499 #define SYSCON_AHB_CLOCK_HIGH     52
 500 /**
 501  * AHB medium frequency in MHz
 502  */
 503 #define SYSCON_AHB_CLOCK_MEDIUM   26
 504 /**
 505  * AHB low frequency in MHz
 506  */
 507 #define SYSCON_AHB_CLOCK_LOW       7  /* i.e 13/2=6.5MHz */
 508
 509 enum syscon_busmaster {
 510   SYSCON_BM_DMAC,
 511   SYSCON_BM_XGAM,
 512   SYSCON_BM_VIDEO_ENC
 513 };
 514
 515 /* Selectr a resistor or a set of resistors */
 516 enum syscon_pull_up_down {
 517   SYSCON_PU_KEY_IN_EN,
 518   SYSCON_PU_EMIF_1_8_BIT_EN,
 519   SYSCON_PU_EMIF_1_16_BIT_EN,
 520   SYSCON_PU_EMIF_1_NFIF_READY_EN,
 521   SYSCON_PU_EMIF_1_NFIF_WAIT_N_EN,
 522 };
 523
 524 /*
 525  * Note that this array must match the order of the array "clk_reg"
 526  * in syscon.c
 527  */
 528 enum syscon_clk {
 529   SYSCON_CLKCONTROL_SLOW_BRIDGE,
 530   SYSCON_CLKCONTROL_UART,
 531   SYSCON_CLKCONTROL_BTR,
 532   SYSCON_CLKCONTROL_EH,
 533   SYSCON_CLKCONTROL_GPIO,
 534   SYSCON_CLKCONTROL_KEYPAD,
 535   SYSCON_CLKCONTROL_APP_TIMER,
 536   SYSCON_CLKCONTROL_ACC_TIMER,
 537   SYSCON_CLKCONTROL_FAST_BRIDGE,
 538   SYSCON_CLKCONTROL_I2C0,
 539   SYSCON_CLKCONTROL_I2C1,
 540   SYSCON_CLKCONTROL_I2S0,
 541   SYSCON_CLKCONTROL_I2S1,
 542   SYSCON_CLKCONTROL_MMC,
 543   SYSCON_CLKCONTROL_SPI,
 544   SYSCON_CLKCONTROL_I2S0_CORE,
 545   SYSCON_CLKCONTROL_I2S1_CORE,
 546   SYSCON_CLKCONTROL_UART1,
 547   SYSCON_CLKCONTROL_AAIF,
 548   SYSCON_CLKCONTROL_AHB,
 549   SYSCON_CLKCONTROL_APEX,
 550   SYSCON_CLKCONTROL_CPU,
 551   SYSCON_CLKCONTROL_DMA,
 552   SYSCON_CLKCONTROL_EMIF,
 553   SYSCON_CLKCONTROL_NAND_IF,
 554   SYSCON_CLKCONTROL_VIDEO_ENC,
 555   SYSCON_CLKCONTROL_XGAM,
 556   SYSCON_CLKCONTROL_SEMI,
 557   SYSCON_CLKCONTROL_AHB_SUBSYS,
 558   SYSCON_CLKCONTROL_MSPRO
 559 };
 560
 561 enum syscon_sysclk_mode {
 562   SYSCON_SYSCLK_DISABLED,
 563   SYSCON_SYSCLK_M_CLK,
 564   SYSCON_SYSCLK_ACC_FSM,
 565   SYSCON_SYSCLK_PLL60_48,
 566   SYSCON_SYSCLK_PLL60_60,
 567   SYSCON_SYSCLK_ACC_PLL208,
 568   SYSCON_SYSCLK_APP_PLL13,
 569   SYSCON_SYSCLK_APP_FSM,
 570   SYSCON_SYSCLK_RTC,
 571   SYSCON_SYSCLK_APP_PLL208
 572 };
 573
 574 enum syscon_sysclk_req {
 575   SYSCON_SYSCLKREQ_DISABLED,
 576   SYSCON_SYSCLKREQ_ACTIVE_LOW,
 577   SYSCON_SYSCLKREQ_MONITOR
 578 };
 579
 580 enum syscon_clk_mode {
 581   SYSCON_CLKMODE_OFF,
 582   SYSCON_CLKMODE_DEFAULT,
 583   SYSCON_CLKMODE_LOW,
 584   SYSCON_CLKMODE_MEDIUM,
 585   SYSCON_CLKMODE_HIGH,
 586   SYSCON_CLKMODE_PERMANENT,
 587   SYSCON_CLKMODE_ON,
 588 };
 589
 590 enum syscon_call_mode {
 591   SYSCON_CLKCALL_NOWAIT,
 592   SYSCON_CLKCALL_WAIT,
 593 };
 594
 595 int syscon_dc_on(bool keep_power_on);
 596 int syscon_set_busmaster_active_state(enum syscon_busmaster busmaster,
 597                                       bool active);
 598 bool syscon_get_busmaster_active_state(void);
 599 int syscon_set_sleep_mask(enum syscon_clk,
 600                           bool sleep_ctrl);
 601 int syscon_config_sysclk(u32 sysclk,
 602                          enum syscon_sysclk_mode sysclkmode,
 603                          bool inverse,
 604                          u32 divisor,
 605                          enum syscon_sysclk_req sysclkreq);
 606 bool syscon_can_turn_off_semi_clock(void);
 607
 608 /* This function is restricted to core.c */
 609 int syscon_request_normal_power(bool req);
 610
 611 /* This function is restricted to be used by platform_speed.c */
 612 int syscon_speed_request(enum syscon_call_mode wait_mode,
 613                          enum syscon_clk_mode req_clk_mode);
 614 #endif /* __MACH_SYSCON_H */