arch/arm/mach-u300/include/mach/coh901318.h

   1 /*
   2  *
   3  * include/linux/coh901318.h
   4  *
   5  *
   6  * Copyright (C) 2007-2009 ST-Ericsson
   7  * License terms: GNU General Public License (GPL) version 2
   8  * DMA driver for COH 901 318
   9  * Author: Per Friden <per.friden@stericsson.com>
  10  */
  11
  12 #ifndef COH901318_H
  13 #define COH901318_H
  14
  15 #include <linux/device.h>
  16 #include <linux/dmaengine.h>
  17
  18 #define MAX_DMA_PACKET_SIZE_SHIFT 11
  19 #define MAX_DMA_PACKET_SIZE (1 << MAX_DMA_PACKET_SIZE_SHIFT)
  20
  21 /**
  22  * struct coh901318_lli - linked list item for DMAC
  23  * @control: control settings for DMAC
  24  * @src_addr: transfer source address
  25  * @dst_addr: transfer destination address
  26  * @link_addr:  physical address to next lli
  27  * @virt_link_addr: virtual address of next lli (only used by pool_free)
  28  * @phy_this: physical address of current lli (only used by pool_free)
  29  */
  30 struct coh901318_lli {
  31         u32 control;
  32         dma_addr_t src_addr;
  33         dma_addr_t dst_addr;
  34         dma_addr_t link_addr;
  35
  36         void *virt_link_addr;
  37         dma_addr_t phy_this;
  38 };
  39 /**
  40  * struct coh901318_params - parameters for DMAC configuration
  41  * @config: DMA config register
  42  * @ctrl_lli_last: DMA control register for the last lli in the list
  43  * @ctrl_lli: DMA control register for an lli
  44  * @ctrl_lli_chained: DMA control register for a chained lli
  45  */
  46 struct coh901318_params {
  47         u32 config;
  48         u32 ctrl_lli_last;
  49         u32 ctrl_lli;
  50         u32 ctrl_lli_chained;
  51 };
  52 /**
  53  * struct coh_dma_channel - dma channel base
  54  * @name: ascii name of dma channel
  55  * @number: channel id number
  56  * @desc_nbr_max: number of preallocated descriptors
  57  * @priority_high: prio of channel, 0 low otherwise high.
  58  * @param: configuration parameters
  59  * @dev_addr: physical address of periphal connected to channel
  60  */
  61 struct coh_dma_channel {
  62         const char name[32];
  63         const int number;
  64         const int desc_nbr_max;
  65         const int priority_high;
  66         const struct coh901318_params param;
  67         const dma_addr_t dev_addr;
  68 };
  69
  70 /**
  71  * dma_access_memory_state_t - register dma for memory access
  72  *
  73  * @dev: The dma device
  74  * @active:  1 means dma intends to access memory
  75  *           0 means dma wont access memory
  76  */
  77 typedef void (*dma_access_memory_state_t)(struct device *dev,
  78                                           bool active);
  79
  80 /**
  81  * struct powersave - DMA power save structure
  82  * @lock: lock protecting data in this struct
  83  * @started_channels: bit mask indicating active dma channels
  84  */
  85 struct powersave {
  86         spinlock_t lock;
  87         u64 started_channels;
  88 };
  89 /**
  90  * struct coh901318_platform - platform arch structure
  91  * @chans_slave: specifying dma slave channels
  92  * @chans_memcpy: specifying dma memcpy channels
  93  * @access_memory_state: requesting DMA memory access (on / off)
  94  * @chan_conf: dma channel configurations
  95  * @max_channels: max number of dma chanenls
  96  */
  97 struct coh901318_platform {
  98         const int *chans_slave;
  99         const int *chans_memcpy;
 100         const dma_access_memory_state_t access_memory_state;
 101         const struct coh_dma_channel *chan_conf;
 102         const int max_channels;
 103 };
 104
 105 /**
 106  * coh901318_filter_id() - DMA channel filter function
 107  * @chan: dma channel handle
 108  * @chan_id: id of dma channel to be filter out
 109  *
 110  * In dma_request_channel() it specifies what channel id to be requested
 111  */
 112 bool coh901318_filter_id(struct dma_chan *chan, void *chan_id);
 113
 114 /*
 115  * DMA Controller - this access the static mappings of the coh901318 dma.
 116  *
 117  */
 118
 119 #define COH901318_MOD32_MASK                                    (0x1F)
 120 #define COH901318_WORD_MASK                                     (0xFFFFFFFF)
 121 /* INT_STATUS - Interrupt Status Registers 32bit (R/-) */
 122 #define COH901318_INT_STATUS1                                   (0x0000)
 123 #define COH901318_INT_STATUS2                                   (0x0004)
 124 /* TC_INT_STATUS - Terminal Count Interrupt Status Registers 32bit (R/-) */
 125 #define COH901318_TC_INT_STATUS1                                (0x0008)
 126 #define COH901318_TC_INT_STATUS2                                (0x000C)
 127 /* TC_INT_CLEAR - Terminal Count Interrupt Clear Registers 32bit (-/W) */
 128 #define COH901318_TC_INT_CLEAR1                                 (0x0010)
 129 #define COH901318_TC_INT_CLEAR2                                 (0x0014)
 130 /* RAW_TC_INT_STATUS - Raw Term Count Interrupt Status Registers 32bit (R/-) */
 131 #define COH901318_RAW_TC_INT_STATUS1                            (0x0018)
 132 #define COH901318_RAW_TC_INT_STATUS2                            (0x001C)
 133 /* BE_INT_STATUS - Bus Error Interrupt Status Registers 32bit (R/-) */
 134 #define COH901318_BE_INT_STATUS1                                (0x0020)
 135 #define COH901318_BE_INT_STATUS2                                (0x0024)
 136 /* BE_INT_CLEAR - Bus Error Interrupt Clear Registers 32bit (-/W) */
 137 #define COH901318_BE_INT_CLEAR1                                 (0x0028)
 138 #define COH901318_BE_INT_CLEAR2                                 (0x002C)
 139 /* RAW_BE_INT_STATUS - Raw Term Count Interrupt Status Registers 32bit (R/-) */
 140 #define COH901318_RAW_BE_INT_STATUS1                            (0x0030)
 141 #define COH901318_RAW_BE_INT_STATUS2                            (0x0034)
 142
 143 /*
 144  * CX_CFG - Channel Configuration Registers 32bit (R/W)
 145  */
 146 #define COH901318_CX_CFG                                        (0x0100)
 147 #define COH901318_CX_CFG_SPACING                                (0x04)
 148 /* Channel enable activates tha dma job */
 149 #define COH901318_CX_CFG_CH_ENABLE                              (0x00000001)
 150 #define COH901318_CX_CFG_CH_DISABLE                             (0x00000000)
 151 /* Request Mode */
 152 #define COH901318_CX_CFG_RM_MASK                                (0x00000006)
 153 #define COH901318_CX_CFG_RM_MEMORY_TO_MEMORY                    (0x0 << 1)
 154 #define COH901318_CX_CFG_RM_PRIMARY_TO_MEMORY                   (0x1 << 1)
 155 #define COH901318_CX_CFG_RM_MEMORY_TO_PRIMARY                   (0x1 << 1)
 156 #define COH901318_CX_CFG_RM_PRIMARY_TO_SECONDARY                (0x3 << 1)
 157 #define COH901318_CX_CFG_RM_SECONDARY_TO_PRIMARY                (0x3 << 1)
 158 /* Linked channel request field. RM must == 11 */
 159 #define COH901318_CX_CFG_LCRF_SHIFT                             3
 160 #define COH901318_CX_CFG_LCRF_MASK                              (0x000001F8)
 161 #define COH901318_CX_CFG_LCR_DISABLE                            (0x00000000)
 162 /* Terminal Counter Interrupt Request Mask */
 163 #define COH901318_CX_CFG_TC_IRQ_ENABLE                          (0x00000200)
 164 #define COH901318_CX_CFG_TC_IRQ_DISABLE                         (0x00000000)
 165 /* Bus Error interrupt Mask */
 166 #define COH901318_CX_CFG_BE_IRQ_ENABLE                          (0x00000400)
 167 #define COH901318_CX_CFG_BE_IRQ_DISABLE                         (0x00000000)
 168
 169 /*
 170  * CX_STAT - Channel Status Registers 32bit (R/-)
 171  */
 172 #define COH901318_CX_STAT                                       (0x0200)
 173 #define COH901318_CX_STAT_SPACING                               (0x04)
 174 #define COH901318_CX_STAT_RBE_IRQ_IND                           (0x00000008)
 175 #define COH901318_CX_STAT_RTC_IRQ_IND                           (0x00000004)
 176 #define COH901318_CX_STAT_ACTIVE                                (0x00000002)
 177 #define COH901318_CX_STAT_ENABLED                               (0x00000001)
 178
 179 /*
 180  * CX_CTRL - Channel Control Registers 32bit (R/W)
 181  */
 182 #define COH901318_CX_CTRL                                       (0x0400)
 183 #define COH901318_CX_CTRL_SPACING                               (0x10)
 184 /* Transfer Count Enable */
 185 #define COH901318_CX_CTRL_TC_ENABLE                             (0x00001000)
 186 #define COH901318_CX_CTRL_TC_DISABLE                            (0x00000000)
 187 /* Transfer Count Value 0 - 4095 */
 188 #define COH901318_CX_CTRL_TC_VALUE_MASK                         (0x00000FFF)
 189 /* Burst count */
 190 #define COH901318_CX_CTRL_BURST_COUNT_MASK                      (0x0000E000)
 191 #define COH901318_CX_CTRL_BURST_COUNT_64_BYTES                  (0x7 << 13)
 192 #define COH901318_CX_CTRL_BURST_COUNT_48_BYTES                  (0x6 << 13)
 193 #define COH901318_CX_CTRL_BURST_COUNT_32_BYTES                  (0x5 << 13)
 194 #define COH901318_CX_CTRL_BURST_COUNT_16_BYTES                  (0x4 << 13)
 195 #define COH901318_CX_CTRL_BURST_COUNT_8_BYTES                   (0x3 << 13)
 196 #define COH901318_CX_CTRL_BURST_COUNT_4_BYTES                   (0x2 << 13)
 197 #define COH901318_CX_CTRL_BURST_COUNT_2_BYTES                   (0x1 << 13)
 198 #define COH901318_CX_CTRL_BURST_COUNT_1_BYTE                    (0x0 << 13)
 199 /* Source bus size  */
 200 #define COH901318_CX_CTRL_SRC_BUS_SIZE_MASK                     (0x00030000)
 201 #define COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS                  (0x2 << 16)
 202 #define COH901318_CX_CTRL_SRC_BUS_SIZE_16_BITS                  (0x1 << 16)
 203 #define COH901318_CX_CTRL_SRC_BUS_SIZE_8_BITS                   (0x0 << 16)
 204 /* Source address increment */
 205 #define COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE                   (0x00040000)
 206 #define COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE                  (0x00000000)
 207 /* Destination Bus Size */
 208 #define COH901318_CX_CTRL_DST_BUS_SIZE_MASK                     (0x00180000)
 209 #define COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS                  (0x2 << 19)
 210 #define COH901318_CX_CTRL_DST_BUS_SIZE_16_BITS                  (0x1 << 19)
 211 #define COH901318_CX_CTRL_DST_BUS_SIZE_8_BITS                   (0x0 << 19)
 212 /* Destination address increment */
 213 #define COH901318_CX_CTRL_DST_ADDR_INC_ENABLE                   (0x00200000)
 214 #define COH901318_CX_CTRL_DST_ADDR_INC_DISABLE                  (0x00000000)
 215 /* Master Mode (Master2 is only connected to MSL) */
 216 #define COH901318_CX_CTRL_MASTER_MODE_MASK                      (0x00C00000)
 217 #define COH901318_CX_CTRL_MASTER_MODE_M2R_M1W                   (0x3 << 22)
 218 #define COH901318_CX_CTRL_MASTER_MODE_M1R_M2W                   (0x2 << 22)
 219 #define COH901318_CX_CTRL_MASTER_MODE_M2RW                      (0x1 << 22)
 220 #define COH901318_CX_CTRL_MASTER_MODE_M1RW                      (0x0 << 22)
 221 /* Terminal Count flag to PER enable */
 222 #define COH901318_CX_CTRL_TCP_ENABLE                            (0x01000000)
 223 #define COH901318_CX_CTRL_TCP_DISABLE                           (0x00000000)
 224 /* Terminal Count flags to CPU enable */
 225 #define COH901318_CX_CTRL_TC_IRQ_ENABLE                         (0x02000000)
 226 #define COH901318_CX_CTRL_TC_IRQ_DISABLE                        (0x00000000)
 227 /* Hand shake to peripheral */
 228 #define COH901318_CX_CTRL_HSP_ENABLE                            (0x04000000)
 229 #define COH901318_CX_CTRL_HSP_DISABLE                           (0x00000000)
 230 #define COH901318_CX_CTRL_HSS_ENABLE                            (0x08000000)
 231 #define COH901318_CX_CTRL_HSS_DISABLE                           (0x00000000)
 232 /* DMA mode */
 233 #define COH901318_CX_CTRL_DDMA_MASK                             (0x30000000)
 234 #define COH901318_CX_CTRL_DDMA_LEGACY                           (0x0 << 28)
 235 #define COH901318_CX_CTRL_DDMA_DEMAND_DMA1                      (0x1 << 28)
 236 #define COH901318_CX_CTRL_DDMA_DEMAND_DMA2                      (0x2 << 28)
 237 /* Primary Request Data Destination */
 238 #define COH901318_CX_CTRL_PRDD_MASK                             (0x40000000)
 239 #define COH901318_CX_CTRL_PRDD_DEST                             (0x1 << 30)
 240 #define COH901318_CX_CTRL_PRDD_SOURCE                           (0x0 << 30)
 241
 242 /*
 243  * CX_SRC_ADDR - Channel Source Address Registers 32bit (R/W)
 244  */
 245 #define COH901318_CX_SRC_ADDR                                   (0x0404)
 246 #define COH901318_CX_SRC_ADDR_SPACING                           (0x10)
 247
 248 /*
 249  * CX_DST_ADDR - Channel Destination Address Registers 32bit R/W
 250  */
 251 #define COH901318_CX_DST_ADDR                                   (0x0408)
 252 #define COH901318_CX_DST_ADDR_SPACING                           (0x10)
 253
 254 /*
 255  * CX_LNK_ADDR - Channel Link Address Registers 32bit (R/W)
 256  */
 257 #define COH901318_CX_LNK_ADDR                                   (0x040C)
 258 #define COH901318_CX_LNK_ADDR_SPACING                           (0x10)
 259 #define COH901318_CX_LNK_LINK_IMMEDIATE                         (0x00000001)
 260 #endif /* COH901318_H */