Pull ec into release branch
[pandora-kernel.git] / arch / arm / mach-sa1100 / generic.c
1 /*
2  * linux/arch/arm/mach-sa1100/generic.c
3  *
4  * Author: Nicolas Pitre
5  *
6  * Code common to all SA11x0 machines.
7  *
8  * This program is free software; you can redistribute it and/or modify
9  * it under the terms of the GNU General Public License version 2 as
10  * published by the Free Software Foundation.
11  */
12 #include <linux/module.h>
13 #include <linux/kernel.h>
14 #include <linux/init.h>
15 #include <linux/delay.h>
16 #include <linux/pm.h>
17 #include <linux/cpufreq.h>
18 #include <linux/ioport.h>
19 #include <linux/sched.h>        /* just for sched_clock() - funny that */
20 #include <linux/platform_device.h>
21
22 #include <asm/div64.h>
23 #include <asm/cnt32_to_63.h>
24 #include <asm/hardware.h>
25 #include <asm/system.h>
26 #include <asm/pgtable.h>
27 #include <asm/mach/map.h>
28 #include <asm/mach/flash.h>
29 #include <asm/irq.h>
30 #include <asm/gpio.h>
31
32 #include "generic.h"
33
34 #define NR_FREQS        16
35
36 /*
37  * This table is setup for a 3.6864MHz Crystal.
38  */
39 static const unsigned short cclk_frequency_100khz[NR_FREQS] = {
40          590,   /*  59.0 MHz */
41          737,   /*  73.7 MHz */
42          885,   /*  88.5 MHz */
43         1032,   /* 103.2 MHz */
44         1180,   /* 118.0 MHz */
45         1327,   /* 132.7 MHz */
46         1475,   /* 147.5 MHz */
47         1622,   /* 162.2 MHz */
48         1769,   /* 176.9 MHz */
49         1917,   /* 191.7 MHz */
50         2064,   /* 206.4 MHz */
51         2212,   /* 221.2 MHz */
52         2359,   /* 235.9 MHz */
53         2507,   /* 250.7 MHz */
54         2654,   /* 265.4 MHz */
55         2802    /* 280.2 MHz */
56 };
57
58 #if defined(CONFIG_CPU_FREQ_SA1100) || defined(CONFIG_CPU_FREQ_SA1110)
59 /* rounds up(!)  */
60 unsigned int sa11x0_freq_to_ppcr(unsigned int khz)
61 {
62         int i;
63
64         khz /= 100;
65
66         for (i = 0; i < NR_FREQS; i++)
67                 if (cclk_frequency_100khz[i] >= khz)
68                         break;
69
70         return i;
71 }
72
73 unsigned int sa11x0_ppcr_to_freq(unsigned int idx)
74 {
75         unsigned int freq = 0;
76         if (idx < NR_FREQS)
77                 freq = cclk_frequency_100khz[idx] * 100;
78         return freq;
79 }
80
81
82 /* make sure that only the "userspace" governor is run -- anything else wouldn't make sense on
83  * this platform, anyway.
84  */
85 int sa11x0_verify_speed(struct cpufreq_policy *policy)
86 {
87         unsigned int tmp;
88         if (policy->cpu)
89                 return -EINVAL;
90
91         cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq, policy->cpuinfo.max_freq);
92
93         /* make sure that at least one frequency is within the policy */
94         tmp = cclk_frequency_100khz[sa11x0_freq_to_ppcr(policy->min)] * 100;
95         if (tmp > policy->max)
96                 policy->max = tmp;
97
98         cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq, policy->cpuinfo.max_freq);
99
100         return 0;
101 }
102
103 unsigned int sa11x0_getspeed(unsigned int cpu)
104 {
105         if (cpu)
106                 return 0;
107         return cclk_frequency_100khz[PPCR & 0xf] * 100;
108 }
109
110 #else
111 /*
112  * We still need to provide this so building without cpufreq works.
113  */ 
114 unsigned int cpufreq_get(unsigned int cpu)
115 {
116         return cclk_frequency_100khz[PPCR & 0xf] * 100;
117 }
118 EXPORT_SYMBOL(cpufreq_get);
119 #endif
120
121 /*
122  * This is the SA11x0 sched_clock implementation.  This has
123  * a resolution of 271ns, and a maximum value of 32025597s (370 days).
124  *
125  * The return value is guaranteed to be monotonic in that range as
126  * long as there is always less than 582 seconds between successive
127  * calls to this function.
128  *
129  *  ( * 1E9 / 3686400 => * 78125 / 288)
130  */
131 unsigned long long sched_clock(void)
132 {
133         unsigned long long v = cnt32_to_63(OSCR);
134
135         /* the <<1 gets rid of the cnt_32_to_63 top bit saving on a bic insn */
136         v *= 78125<<1;
137         do_div(v, 288<<1);
138
139         return v;
140 }
141
142 int gpio_direction_input(unsigned gpio)
143 {
144         unsigned long flags;
145
146         if (gpio > GPIO_MAX)
147                 return -EINVAL;
148
149         local_irq_save(flags);
150         GPDR &= ~GPIO_GPIO(gpio);
151         local_irq_restore(flags);
152         return 0;
153 }
154
155 EXPORT_SYMBOL(gpio_direction_input);
156
157 int gpio_direction_output(unsigned gpio, int value)
158 {
159         unsigned long flags;
160
161         if (gpio > GPIO_MAX)
162                 return -EINVAL;
163
164         local_irq_save(flags);
165         gpio_set_value(gpio, value);
166         GPDR |= GPIO_GPIO(gpio);
167         local_irq_restore(flags);
168         return 0;
169 }
170
171 EXPORT_SYMBOL(gpio_direction_output);
172
173 /*
174  * Default power-off for SA1100
175  */
176 static void sa1100_power_off(void)
177 {
178         mdelay(100);
179         local_irq_disable();
180         /* disable internal oscillator, float CS lines */
181         PCFR = (PCFR_OPDE | PCFR_FP | PCFR_FS);
182         /* enable wake-up on GPIO0 (Assabet...) */
183         PWER = GFER = GRER = 1;
184         /*
185          * set scratchpad to zero, just in case it is used as a
186          * restart address by the bootloader.
187          */
188         PSPR = 0;
189         /* enter sleep mode */
190         PMCR = PMCR_SF;
191 }
192
193 static struct resource sa11x0udc_resources[] = {
194         [0] = {
195                 .start  = 0x80000000,
196                 .end    = 0x8000ffff,
197                 .flags  = IORESOURCE_MEM,
198         },
199 };
200
201 static u64 sa11x0udc_dma_mask = 0xffffffffUL;
202
203 static struct platform_device sa11x0udc_device = {
204         .name           = "sa11x0-udc",
205         .id             = -1,
206         .dev            = {
207                 .dma_mask = &sa11x0udc_dma_mask,
208                 .coherent_dma_mask = 0xffffffff,
209         },
210         .num_resources  = ARRAY_SIZE(sa11x0udc_resources),
211         .resource       = sa11x0udc_resources,
212 };
213
214 static struct resource sa11x0uart1_resources[] = {
215         [0] = {
216                 .start  = 0x80010000,
217                 .end    = 0x8001ffff,
218                 .flags  = IORESOURCE_MEM,
219         },
220 };
221
222 static struct platform_device sa11x0uart1_device = {
223         .name           = "sa11x0-uart",
224         .id             = 1,
225         .num_resources  = ARRAY_SIZE(sa11x0uart1_resources),
226         .resource       = sa11x0uart1_resources,
227 };
228
229 static struct resource sa11x0uart3_resources[] = {
230         [0] = {
231                 .start  = 0x80050000,
232                 .end    = 0x8005ffff,
233                 .flags  = IORESOURCE_MEM,
234         },
235 };
236
237 static struct platform_device sa11x0uart3_device = {
238         .name           = "sa11x0-uart",
239         .id             = 3,
240         .num_resources  = ARRAY_SIZE(sa11x0uart3_resources),
241         .resource       = sa11x0uart3_resources,
242 };
243
244 static struct resource sa11x0mcp_resources[] = {
245         [0] = {
246                 .start  = 0x80060000,
247                 .end    = 0x8006ffff,
248                 .flags  = IORESOURCE_MEM,
249         },
250 };
251
252 static u64 sa11x0mcp_dma_mask = 0xffffffffUL;
253
254 static struct platform_device sa11x0mcp_device = {
255         .name           = "sa11x0-mcp",
256         .id             = -1,
257         .dev = {
258                 .dma_mask = &sa11x0mcp_dma_mask,
259                 .coherent_dma_mask = 0xffffffff,
260         },
261         .num_resources  = ARRAY_SIZE(sa11x0mcp_resources),
262         .resource       = sa11x0mcp_resources,
263 };
264
265 void sa11x0_set_mcp_data(struct mcp_plat_data *data)
266 {
267         sa11x0mcp_device.dev.platform_data = data;
268 }
269
270 static struct resource sa11x0ssp_resources[] = {
271         [0] = {
272                 .start  = 0x80070000,
273                 .end    = 0x8007ffff,
274                 .flags  = IORESOURCE_MEM,
275         },
276 };
277
278 static u64 sa11x0ssp_dma_mask = 0xffffffffUL;
279
280 static struct platform_device sa11x0ssp_device = {
281         .name           = "sa11x0-ssp",
282         .id             = -1,
283         .dev = {
284                 .dma_mask = &sa11x0ssp_dma_mask,
285                 .coherent_dma_mask = 0xffffffff,
286         },
287         .num_resources  = ARRAY_SIZE(sa11x0ssp_resources),
288         .resource       = sa11x0ssp_resources,
289 };
290
291 static struct resource sa11x0fb_resources[] = {
292         [0] = {
293                 .start  = 0xb0100000,
294                 .end    = 0xb010ffff,
295                 .flags  = IORESOURCE_MEM,
296         },
297         [1] = {
298                 .start  = IRQ_LCD,
299                 .end    = IRQ_LCD,
300                 .flags  = IORESOURCE_IRQ,
301         },
302 };
303
304 static struct platform_device sa11x0fb_device = {
305         .name           = "sa11x0-fb",
306         .id             = -1,
307         .dev = {
308                 .coherent_dma_mask = 0xffffffff,
309         },
310         .num_resources  = ARRAY_SIZE(sa11x0fb_resources),
311         .resource       = sa11x0fb_resources,
312 };
313
314 static struct platform_device sa11x0pcmcia_device = {
315         .name           = "sa11x0-pcmcia",
316         .id             = -1,
317 };
318
319 static struct platform_device sa11x0mtd_device = {
320         .name           = "flash",
321         .id             = -1,
322 };
323
324 void sa11x0_set_flash_data(struct flash_platform_data *flash,
325                            struct resource *res, int nr)
326 {
327         flash->name = "sa1100";
328         sa11x0mtd_device.dev.platform_data = flash;
329         sa11x0mtd_device.resource = res;
330         sa11x0mtd_device.num_resources = nr;
331 }
332
333 static struct resource sa11x0ir_resources[] = {
334         {
335                 .start  = __PREG(Ser2UTCR0),
336                 .end    = __PREG(Ser2UTCR0) + 0x24 - 1,
337                 .flags  = IORESOURCE_MEM,
338         }, {
339                 .start  = __PREG(Ser2HSCR0),
340                 .end    = __PREG(Ser2HSCR0) + 0x1c - 1,
341                 .flags  = IORESOURCE_MEM,
342         }, {
343                 .start  = __PREG(Ser2HSCR2),
344                 .end    = __PREG(Ser2HSCR2) + 0x04 - 1,
345                 .flags  = IORESOURCE_MEM,
346         }, {
347                 .start  = IRQ_Ser2ICP,
348                 .end    = IRQ_Ser2ICP,
349                 .flags  = IORESOURCE_IRQ,
350         }
351 };
352
353 static struct platform_device sa11x0ir_device = {
354         .name           = "sa11x0-ir",
355         .id             = -1,
356         .num_resources  = ARRAY_SIZE(sa11x0ir_resources),
357         .resource       = sa11x0ir_resources,
358 };
359
360 void sa11x0_set_irda_data(struct irda_platform_data *irda)
361 {
362         sa11x0ir_device.dev.platform_data = irda;
363 }
364
365 static struct platform_device sa11x0rtc_device = {
366         .name           = "sa1100-rtc",
367         .id             = -1,
368 };
369
370 static struct platform_device *sa11x0_devices[] __initdata = {
371         &sa11x0udc_device,
372         &sa11x0uart1_device,
373         &sa11x0uart3_device,
374         &sa11x0mcp_device,
375         &sa11x0ssp_device,
376         &sa11x0pcmcia_device,
377         &sa11x0fb_device,
378         &sa11x0mtd_device,
379         &sa11x0rtc_device,
380 };
381
382 static int __init sa1100_init(void)
383 {
384         pm_power_off = sa1100_power_off;
385
386         if (sa11x0ir_device.dev.platform_data)
387                 platform_device_register(&sa11x0ir_device);
388
389         return platform_add_devices(sa11x0_devices, ARRAY_SIZE(sa11x0_devices));
390 }
391
392 arch_initcall(sa1100_init);
393
394 void (*sa1100fb_backlight_power)(int on);
395 void (*sa1100fb_lcd_power)(int on);
396
397 EXPORT_SYMBOL(sa1100fb_backlight_power);
398 EXPORT_SYMBOL(sa1100fb_lcd_power);
399
400
401 /*
402  * Common I/O mapping:
403  *
404  * Typically, static virtual address mappings are as follow:
405  *
406  * 0xf0000000-0xf3ffffff:       miscellaneous stuff (CPLDs, etc.)
407  * 0xf4000000-0xf4ffffff:       SA-1111
408  * 0xf5000000-0xf5ffffff:       reserved (used by cache flushing area)
409  * 0xf6000000-0xfffeffff:       reserved (internal SA1100 IO defined above)
410  * 0xffff0000-0xffff0fff:       SA1100 exception vectors
411  * 0xffff2000-0xffff2fff:       Minicache copy_user_page area
412  *
413  * Below 0xe8000000 is reserved for vm allocation.
414  *
415  * The machine specific code must provide the extra mapping beside the
416  * default mapping provided here.
417  */
418
419 static struct map_desc standard_io_desc[] __initdata = {
420         {       /* PCM */
421                 .virtual        =  0xf8000000,
422                 .pfn            = __phys_to_pfn(0x80000000),
423                 .length         = 0x00100000,
424                 .type           = MT_DEVICE
425         }, {    /* SCM */
426                 .virtual        =  0xfa000000,
427                 .pfn            = __phys_to_pfn(0x90000000),
428                 .length         = 0x00100000,
429                 .type           = MT_DEVICE
430         }, {    /* MER */
431                 .virtual        =  0xfc000000,
432                 .pfn            = __phys_to_pfn(0xa0000000),
433                 .length         = 0x00100000,
434                 .type           = MT_DEVICE
435         }, {    /* LCD + DMA */
436                 .virtual        =  0xfe000000,
437                 .pfn            = __phys_to_pfn(0xb0000000),
438                 .length         = 0x00200000,
439                 .type           = MT_DEVICE
440         },
441 };
442
443 void __init sa1100_map_io(void)
444 {
445         iotable_init(standard_io_desc, ARRAY_SIZE(standard_io_desc));
446 }
447
448 /*
449  * Disable the memory bus request/grant signals on the SA1110 to
450  * ensure that we don't receive spurious memory requests.  We set
451  * the MBGNT signal false to ensure the SA1111 doesn't own the
452  * SDRAM bus.
453  */
454 void __init sa1110_mb_disable(void)
455 {
456         unsigned long flags;
457
458         local_irq_save(flags);
459         
460         PGSR &= ~GPIO_MBGNT;
461         GPCR = GPIO_MBGNT;
462         GPDR = (GPDR & ~GPIO_MBREQ) | GPIO_MBGNT;
463
464         GAFR &= ~(GPIO_MBGNT | GPIO_MBREQ);
465
466         local_irq_restore(flags);
467 }
468
469 /*
470  * If the system is going to use the SA-1111 DMA engines, set up
471  * the memory bus request/grant pins.
472  */
473 void __init sa1110_mb_enable(void)
474 {
475         unsigned long flags;
476
477         local_irq_save(flags);
478
479         PGSR &= ~GPIO_MBGNT;
480         GPCR = GPIO_MBGNT;
481         GPDR = (GPDR & ~GPIO_MBREQ) | GPIO_MBGNT;
482
483         GAFR |= (GPIO_MBGNT | GPIO_MBREQ);
484         TUCR |= TUCR_MR;
485
486         local_irq_restore(flags);
487 }
488