arch/arm/mach-s5pc100/dev-spi.c

   1 /* linux/arch/arm/mach-s5pc100/dev-spi.c
   2  *
   3  * Copyright (C) 2010 Samsung Electronics Co. Ltd.
   4  *      Jaswinder Singh <jassi.brar@samsung.com>
   5  *
   6  * This program is free software; you can redistribute it and/or modify
   7  * it under the terms of the GNU General Public License version 2 as
   8  * published by the Free Software Foundation.
   9  */
  10
  11 #include <linux/platform_device.h>
  12 #include <linux/dma-mapping.h>
  13 #include <linux/gpio.h>
  14
  15 #include <mach/dma.h>
  16 #include <mach/map.h>
  17 #include <mach/spi-clocks.h>
  18
  19 #include <plat/s3c64xx-spi.h>
  20 #include <plat/gpio-cfg.h>
  21 #include <plat/irqs.h>
  22
  23 static char *spi_src_clks[] = {
  24         [S5PC100_SPI_SRCCLK_PCLK] = "pclk",
  25         [S5PC100_SPI_SRCCLK_48M] = "spi_48m",
  26         [S5PC100_SPI_SRCCLK_SPIBUS] = "spi_bus",
  27 };
  28
  29 /* SPI Controller platform_devices */
  30
  31 /* Since we emulate multi-cs capability, we do not touch the CS.
  32  * The emulated CS is toggled by board specific mechanism, as it can
  33  * be either some immediate GPIO or some signal out of some other
  34  * chip in between ... or some yet another way.
  35  * We simply do not assume anything about CS.
  36  */
  37 static int s5pc100_spi_cfg_gpio(struct platform_device *pdev)
  38 {
  39         switch (pdev->id) {
  40         case 0:
  41                 s3c_gpio_cfgpin(S5PC100_GPB(0), S3C_GPIO_SFN(2));
  42                 s3c_gpio_cfgpin(S5PC100_GPB(1), S3C_GPIO_SFN(2));
  43                 s3c_gpio_cfgpin(S5PC100_GPB(2), S3C_GPIO_SFN(2));
  44                 s3c_gpio_setpull(S5PC100_GPB(0), S3C_GPIO_PULL_UP);
  45                 s3c_gpio_setpull(S5PC100_GPB(1), S3C_GPIO_PULL_UP);
  46                 s3c_gpio_setpull(S5PC100_GPB(2), S3C_GPIO_PULL_UP);
  47                 break;
  48
  49         case 1:
  50                 s3c_gpio_cfgpin(S5PC100_GPB(4), S3C_GPIO_SFN(2));
  51                 s3c_gpio_cfgpin(S5PC100_GPB(5), S3C_GPIO_SFN(2));
  52                 s3c_gpio_cfgpin(S5PC100_GPB(6), S3C_GPIO_SFN(2));
  53                 s3c_gpio_setpull(S5PC100_GPB(4), S3C_GPIO_PULL_UP);
  54                 s3c_gpio_setpull(S5PC100_GPB(5), S3C_GPIO_PULL_UP);
  55                 s3c_gpio_setpull(S5PC100_GPB(6), S3C_GPIO_PULL_UP);
  56                 break;
  57
  58         case 2:
  59                 s3c_gpio_cfgpin(S5PC100_GPG3(0), S3C_GPIO_SFN(3));
  60                 s3c_gpio_cfgpin(S5PC100_GPG3(2), S3C_GPIO_SFN(3));
  61                 s3c_gpio_cfgpin(S5PC100_GPG3(3), S3C_GPIO_SFN(3));
  62                 s3c_gpio_setpull(S5PC100_GPG3(0), S3C_GPIO_PULL_UP);
  63                 s3c_gpio_setpull(S5PC100_GPG3(2), S3C_GPIO_PULL_UP);
  64                 s3c_gpio_setpull(S5PC100_GPG3(3), S3C_GPIO_PULL_UP);
  65                 break;
  66
  67         default:
  68                 dev_err(&pdev->dev, "Invalid SPI Controller number!");
  69                 return -EINVAL;
  70         }
  71
  72         return 0;
  73 }
  74
  75 static struct resource s5pc100_spi0_resource[] = {
  76         [0] = {
  77                 .start = S5PC100_PA_SPI0,
  78                 .end   = S5PC100_PA_SPI0 + 0x100 - 1,
  79                 .flags = IORESOURCE_MEM,
  80         },
  81         [1] = {
  82                 .start = DMACH_SPI0_TX,
  83                 .end   = DMACH_SPI0_TX,
  84                 .flags = IORESOURCE_DMA,
  85         },
  86         [2] = {
  87                 .start = DMACH_SPI0_RX,
  88                 .end   = DMACH_SPI0_RX,
  89                 .flags = IORESOURCE_DMA,
  90         },
  91         [3] = {
  92                 .start = IRQ_SPI0,
  93                 .end   = IRQ_SPI0,
  94                 .flags = IORESOURCE_IRQ,
  95         },
  96 };
  97
  98 static struct s3c64xx_spi_info s5pc100_spi0_pdata = {
  99         .cfg_gpio = s5pc100_spi_cfg_gpio,
 100         .fifo_lvl_mask = 0x7f,
 101         .rx_lvl_offset = 13,
 102         .high_speed = 1,
 103 };
 104
 105 static u64 spi_dmamask = DMA_BIT_MASK(32);
 106
 107 struct platform_device s5pc100_device_spi0 = {
 108         .name             = "s3c64xx-spi",
 109         .id               = 0,
 110         .num_resources    = ARRAY_SIZE(s5pc100_spi0_resource),
 111         .resource         = s5pc100_spi0_resource,
 112         .dev = {
 113                 .dma_mask               = &spi_dmamask,
 114                 .coherent_dma_mask      = DMA_BIT_MASK(32),
 115                 .platform_data = &s5pc100_spi0_pdata,
 116         },
 117 };
 118
 119 static struct resource s5pc100_spi1_resource[] = {
 120         [0] = {
 121                 .start = S5PC100_PA_SPI1,
 122                 .end   = S5PC100_PA_SPI1 + 0x100 - 1,
 123                 .flags = IORESOURCE_MEM,
 124         },
 125         [1] = {
 126                 .start = DMACH_SPI1_TX,
 127                 .end   = DMACH_SPI1_TX,
 128                 .flags = IORESOURCE_DMA,
 129         },
 130         [2] = {
 131                 .start = DMACH_SPI1_RX,
 132                 .end   = DMACH_SPI1_RX,
 133                 .flags = IORESOURCE_DMA,
 134         },
 135         [3] = {
 136                 .start = IRQ_SPI1,
 137                 .end   = IRQ_SPI1,
 138                 .flags = IORESOURCE_IRQ,
 139         },
 140 };
 141
 142 static struct s3c64xx_spi_info s5pc100_spi1_pdata = {
 143         .cfg_gpio = s5pc100_spi_cfg_gpio,
 144         .fifo_lvl_mask = 0x7f,
 145         .rx_lvl_offset = 13,
 146         .high_speed = 1,
 147 };
 148
 149 struct platform_device s5pc100_device_spi1 = {
 150         .name             = "s3c64xx-spi",
 151         .id               = 1,
 152         .num_resources    = ARRAY_SIZE(s5pc100_spi1_resource),
 153         .resource         = s5pc100_spi1_resource,
 154         .dev = {
 155                 .dma_mask               = &spi_dmamask,
 156                 .coherent_dma_mask      = DMA_BIT_MASK(32),
 157                 .platform_data = &s5pc100_spi1_pdata,
 158         },
 159 };
 160
 161 static struct resource s5pc100_spi2_resource[] = {
 162         [0] = {
 163                 .start = S5PC100_PA_SPI2,
 164                 .end   = S5PC100_PA_SPI2 + 0x100 - 1,
 165                 .flags = IORESOURCE_MEM,
 166         },
 167         [1] = {
 168                 .start = DMACH_SPI2_TX,
 169                 .end   = DMACH_SPI2_TX,
 170                 .flags = IORESOURCE_DMA,
 171         },
 172         [2] = {
 173                 .start = DMACH_SPI2_RX,
 174                 .end   = DMACH_SPI2_RX,
 175                 .flags = IORESOURCE_DMA,
 176         },
 177         [3] = {
 178                 .start = IRQ_SPI2,
 179                 .end   = IRQ_SPI2,
 180                 .flags = IORESOURCE_IRQ,
 181         },
 182 };
 183
 184 static struct s3c64xx_spi_info s5pc100_spi2_pdata = {
 185         .cfg_gpio = s5pc100_spi_cfg_gpio,
 186         .fifo_lvl_mask = 0x7f,
 187         .rx_lvl_offset = 13,
 188         .high_speed = 1,
 189 };
 190
 191 struct platform_device s5pc100_device_spi2 = {
 192         .name             = "s3c64xx-spi",
 193         .id               = 2,
 194         .num_resources    = ARRAY_SIZE(s5pc100_spi2_resource),
 195         .resource         = s5pc100_spi2_resource,
 196         .dev = {
 197                 .dma_mask               = &spi_dmamask,
 198                 .coherent_dma_mask      = DMA_BIT_MASK(32),
 199                 .platform_data = &s5pc100_spi2_pdata,
 200         },
 201 };
 202
 203 void __init s5pc100_spi_set_info(int cntrlr, int src_clk_nr, int num_cs)
 204 {
 205         struct s3c64xx_spi_info *pd;
 206
 207         /* Reject invalid configuration */
 208         if (!num_cs || src_clk_nr < 0
 209                         || src_clk_nr > S5PC100_SPI_SRCCLK_SPIBUS) {
 210                 printk(KERN_ERR "%s: Invalid SPI configuration\n", __func__);
 211                 return;
 212         }
 213
 214         switch (cntrlr) {
 215         case 0:
 216                 pd = &s5pc100_spi0_pdata;
 217                 break;
 218         case 1:
 219                 pd = &s5pc100_spi1_pdata;
 220                 break;
 221         case 2:
 222                 pd = &s5pc100_spi2_pdata;
 223                 break;
 224         default:
 225                 printk(KERN_ERR "%s: Invalid SPI controller(%d)\n",
 226                                                         __func__, cntrlr);
 227                 return;
 228         }
 229
 230         pd->num_cs = num_cs;
 231         pd->src_clk_nr = src_clk_nr;
 232         pd->src_clk_name = spi_src_clks[src_clk_nr];
 233 }