arch/arm/mach-s3c64xx/cpufreq.c

   1 /* linux/arch/arm/plat-s3c64xx/cpufreq.c
   2  *
   3  * Copyright 2009 Wolfson Microelectronics plc
   4  *
   5  * S3C64xx CPUfreq Support
   6  *
   7  * This program is free software; you can redistribute it and/or modify
   8  * it under the terms of the GNU General Public License version 2 as
   9  * published by the Free Software Foundation.
  10  */
  11
  12 #include <linux/kernel.h>
  13 #include <linux/types.h>
  14 #include <linux/init.h>
  15 #include <linux/cpufreq.h>
  16 #include <linux/clk.h>
  17 #include <linux/err.h>
  18 #include <linux/regulator/consumer.h>
  19
  20 static struct clk *armclk;
  21 static struct regulator *vddarm;
  22 static unsigned long regulator_latency;
  23
  24 #ifdef CONFIG_CPU_S3C6410
  25 struct s3c64xx_dvfs {
  26         unsigned int vddarm_min;
  27         unsigned int vddarm_max;
  28 };
  29
  30 static struct s3c64xx_dvfs s3c64xx_dvfs_table[] = {
  31         [0] = { 1000000, 1150000 },
  32         [1] = { 1050000, 1150000 },
  33         [2] = { 1100000, 1150000 },
  34         [3] = { 1200000, 1350000 },
  35 };
  36
  37 static struct cpufreq_frequency_table s3c64xx_freq_table[] = {
  38         { 0,  66000 },
  39         { 0, 133000 },
  40         { 1, 222000 },
  41         { 1, 266000 },
  42         { 2, 333000 },
  43         { 2, 400000 },
  44         { 2, 532000 },
  45         { 2, 533000 },
  46         { 3, 667000 },
  47         { 0, CPUFREQ_TABLE_END },
  48 };
  49 #endif
  50
  51 static int s3c64xx_cpufreq_verify_speed(struct cpufreq_policy *policy)
  52 {
  53         if (policy->cpu != 0)
  54                 return -EINVAL;
  55
  56         return cpufreq_frequency_table_verify(policy, s3c64xx_freq_table);
  57 }
  58
  59 static unsigned int s3c64xx_cpufreq_get_speed(unsigned int cpu)
  60 {
  61         if (cpu != 0)
  62                 return 0;
  63
  64         return clk_get_rate(armclk) / 1000;
  65 }
  66
  67 static int s3c64xx_cpufreq_set_target(struct cpufreq_policy *policy,
  68                                       unsigned int target_freq,
  69                                       unsigned int relation)
  70 {
  71         int ret;
  72         unsigned int i;
  73         struct cpufreq_freqs freqs;
  74         struct s3c64xx_dvfs *dvfs;
  75
  76         ret = cpufreq_frequency_table_target(policy, s3c64xx_freq_table,
  77                                              target_freq, relation, &i);
  78         if (ret != 0)
  79                 return ret;
  80
  81         freqs.cpu = 0;
  82         freqs.old = clk_get_rate(armclk) / 1000;
  83         freqs.new = s3c64xx_freq_table[i].frequency;
  84         freqs.flags = 0;
  85         dvfs = &s3c64xx_dvfs_table[s3c64xx_freq_table[i].index];
  86
  87         if (freqs.old == freqs.new)
  88                 return 0;
  89
  90         pr_debug("cpufreq: Transition %d-%dkHz\n", freqs.old, freqs.new);
  91
  92         cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
  93
  94 #ifdef CONFIG_REGULATOR
  95         if (vddarm && freqs.new > freqs.old) {
  96                 ret = regulator_set_voltage(vddarm,
  97                                             dvfs->vddarm_min,
  98                                             dvfs->vddarm_max);
  99                 if (ret != 0) {
 100                         pr_err("cpufreq: Failed to set VDDARM for %dkHz: %d\n",
 101                                freqs.new, ret);
 102                         goto err;
 103                 }
 104         }
 105 #endif
 106
 107         ret = clk_set_rate(armclk, freqs.new * 1000);
 108         if (ret < 0) {
 109                 pr_err("cpufreq: Failed to set rate %dkHz: %d\n",
 110                        freqs.new, ret);
 111                 goto err;
 112         }
 113
 114 #ifdef CONFIG_REGULATOR
 115         if (vddarm && freqs.new < freqs.old) {
 116                 ret = regulator_set_voltage(vddarm,
 117                                             dvfs->vddarm_min,
 118                                             dvfs->vddarm_max);
 119                 if (ret != 0) {
 120                         pr_err("cpufreq: Failed to set VDDARM for %dkHz: %d\n",
 121                                freqs.new, ret);
 122                         goto err_clk;
 123                 }
 124         }
 125 #endif
 126
 127         cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
 128
 129         pr_debug("cpufreq: Set actual frequency %lukHz\n",
 130                  clk_get_rate(armclk) / 1000);
 131
 132         return 0;
 133
 134 err_clk:
 135         if (clk_set_rate(armclk, freqs.old * 1000) < 0)
 136                 pr_err("Failed to restore original clock rate\n");
 137 err:
 138         cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
 139
 140         return ret;
 141 }
 142
 143 #ifdef CONFIG_REGULATOR
 144 static void __init s3c64xx_cpufreq_config_regulator(void)
 145 {
 146         int count, v, i, found;
 147         struct cpufreq_frequency_table *freq;
 148         struct s3c64xx_dvfs *dvfs;
 149
 150         count = regulator_count_voltages(vddarm);
 151         if (count < 0) {
 152                 pr_err("cpufreq: Unable to check supported voltages\n");
 153         }
 154
 155         freq = s3c64xx_freq_table;
 156         while (count > 0 && freq->frequency != CPUFREQ_TABLE_END) {
 157                 if (freq->frequency == CPUFREQ_ENTRY_INVALID)
 158                         continue;
 159
 160                 dvfs = &s3c64xx_dvfs_table[freq->index];
 161                 found = 0;
 162
 163                 for (i = 0; i < count; i++) {
 164                         v = regulator_list_voltage(vddarm, i);
 165                         if (v >= dvfs->vddarm_min && v <= dvfs->vddarm_max)
 166                                 found = 1;
 167                 }
 168
 169                 if (!found) {
 170                         pr_debug("cpufreq: %dkHz unsupported by regulator\n",
 171                                  freq->frequency);
 172                         freq->frequency = CPUFREQ_ENTRY_INVALID;
 173                 }
 174
 175                 freq++;
 176         }
 177
 178         /* Guess based on having to do an I2C/SPI write; in future we
 179          * will be able to query the regulator performance here. */
 180         regulator_latency = 1 * 1000 * 1000;
 181 }
 182 #endif
 183
 184 static int __init s3c64xx_cpufreq_driver_init(struct cpufreq_policy *policy)
 185 {
 186         int ret;
 187         struct cpufreq_frequency_table *freq;
 188
 189         if (policy->cpu != 0)
 190                 return -EINVAL;
 191
 192         if (s3c64xx_freq_table == NULL) {
 193                 pr_err("cpufreq: No frequency information for this CPU\n");
 194                 return -ENODEV;
 195         }
 196
 197         armclk = clk_get(NULL, "armclk");
 198         if (IS_ERR(armclk)) {
 199                 pr_err("cpufreq: Unable to obtain ARMCLK: %ld\n",
 200                        PTR_ERR(armclk));
 201                 return PTR_ERR(armclk);
 202         }
 203
 204 #ifdef CONFIG_REGULATOR
 205         vddarm = regulator_get(NULL, "vddarm");
 206         if (IS_ERR(vddarm)) {
 207                 ret = PTR_ERR(vddarm);
 208                 pr_err("cpufreq: Failed to obtain VDDARM: %d\n", ret);
 209                 pr_err("cpufreq: Only frequency scaling available\n");
 210                 vddarm = NULL;
 211         } else {
 212                 s3c64xx_cpufreq_config_regulator();
 213         }
 214 #endif
 215
 216         freq = s3c64xx_freq_table;
 217         while (freq->frequency != CPUFREQ_TABLE_END) {
 218                 unsigned long r;
 219
 220                 /* Check for frequencies we can generate */
 221                 r = clk_round_rate(armclk, freq->frequency * 1000);
 222                 r /= 1000;
 223                 if (r != freq->frequency) {
 224                         pr_debug("cpufreq: %dkHz unsupported by clock\n",
 225                                  freq->frequency);
 226                         freq->frequency = CPUFREQ_ENTRY_INVALID;
 227                 }
 228
 229                 /* If we have no regulator then assume startup
 230                  * frequency is the maximum we can support. */
 231                 if (!vddarm && freq->frequency > s3c64xx_cpufreq_get_speed(0))
 232                         freq->frequency = CPUFREQ_ENTRY_INVALID;
 233
 234                 freq++;
 235         }
 236
 237         policy->cur = clk_get_rate(armclk) / 1000;
 238
 239         /* Datasheet says PLL stabalisation time (if we were to use
 240          * the PLLs, which we don't currently) is ~300us worst case,
 241          * but add some fudge.
 242          */
 243         policy->cpuinfo.transition_latency = (500 * 1000) + regulator_latency;
 244
 245         ret = cpufreq_frequency_table_cpuinfo(policy, s3c64xx_freq_table);
 246         if (ret != 0) {
 247                 pr_err("cpufreq: Failed to configure frequency table: %d\n",
 248                        ret);
 249                 regulator_put(vddarm);
 250                 clk_put(armclk);
 251         }
 252
 253         return ret;
 254 }
 255
 256 static struct cpufreq_driver s3c64xx_cpufreq_driver = {
 257         .owner          = THIS_MODULE,
 258         .flags          = 0,
 259         .verify         = s3c64xx_cpufreq_verify_speed,
 260         .target         = s3c64xx_cpufreq_set_target,
 261         .get            = s3c64xx_cpufreq_get_speed,
 262         .init           = s3c64xx_cpufreq_driver_init,
 263         .name           = "s3c",
 264 };
 265
 266 static int __init s3c64xx_cpufreq_init(void)
 267 {
 268         return cpufreq_register_driver(&s3c64xx_cpufreq_driver);
 269 }
 270 module_init(s3c64xx_cpufreq_init);