arch/arm/mach-s3c64xx/clock.c

   1 /* linux/arch/arm/plat-s3c64xx/clock.c
   2  *
   3  * Copyright 2008 Openmoko, Inc.
   4  * Copyright 2008 Simtec Electronics
   5  *      Ben Dooks <ben@simtec.co.uk>
   6  *      http://armlinux.simtec.co.uk/
   7  *
   8  * S3C64XX Base clock support
   9  *
  10  * This program is free software; you can redistribute it and/or modify
  11  * it under the terms of the GNU General Public License version 2 as
  12  * published by the Free Software Foundation.
  13 */
  14
  15 #include <linux/init.h>
  16 #include <linux/module.h>
  17 #include <linux/interrupt.h>
  18 #include <linux/ioport.h>
  19 #include <linux/clk.h>
  20 #include <linux/err.h>
  21 #include <linux/io.h>
  22
  23 #include <mach/hardware.h>
  24 #include <mach/map.h>
  25
  26 #include <mach/regs-sys.h>
  27 #include <mach/regs-clock.h>
  28 #include <mach/pll.h>
  29
  30 #include <plat/cpu.h>
  31 #include <plat/devs.h>
  32 #include <plat/cpu-freq.h>
  33 #include <plat/clock.h>
  34 #include <plat/clock-clksrc.h>
  35
  36 /* fin_apll, fin_mpll and fin_epll are all the same clock, which we call
  37  * ext_xtal_mux for want of an actual name from the manual.
  38 */
  39
  40 static struct clk clk_ext_xtal_mux = {
  41         .name           = "ext_xtal",
  42         .id             = -1,
  43 };
  44
  45 #define clk_fin_apll clk_ext_xtal_mux
  46 #define clk_fin_mpll clk_ext_xtal_mux
  47 #define clk_fin_epll clk_ext_xtal_mux
  48
  49 #define clk_fout_mpll   clk_mpll
  50 #define clk_fout_epll   clk_epll
  51
  52 struct clk clk_h2 = {
  53         .name           = "hclk2",
  54         .id             = -1,
  55         .rate           = 0,
  56 };
  57
  58 struct clk clk_27m = {
  59         .name           = "clk_27m",
  60         .id             = -1,
  61         .rate           = 27000000,
  62 };
  63
  64 static int clk_48m_ctrl(struct clk *clk, int enable)
  65 {
  66         unsigned long flags;
  67         u32 val;
  68
  69         /* can't rely on clock lock, this register has other usages */
  70         local_irq_save(flags);
  71
  72         val = __raw_readl(S3C64XX_OTHERS);
  73         if (enable)
  74                 val |= S3C64XX_OTHERS_USBMASK;
  75         else
  76                 val &= ~S3C64XX_OTHERS_USBMASK;
  77
  78         __raw_writel(val, S3C64XX_OTHERS);
  79         local_irq_restore(flags);
  80
  81         return 0;
  82 }
  83
  84 struct clk clk_48m = {
  85         .name           = "clk_48m",
  86         .id             = -1,
  87         .rate           = 48000000,
  88         .enable         = clk_48m_ctrl,
  89 };
  90
  91 static int inline s3c64xx_gate(void __iomem *reg,
  92                                 struct clk *clk,
  93                                 int enable)
  94 {
  95         unsigned int ctrlbit = clk->ctrlbit;
  96         u32 con;
  97
  98         con = __raw_readl(reg);
  99
 100         if (enable)
 101                 con |= ctrlbit;
 102         else
 103                 con &= ~ctrlbit;
 104
 105         __raw_writel(con, reg);
 106         return 0;
 107 }
 108
 109 static int s3c64xx_pclk_ctrl(struct clk *clk, int enable)
 110 {
 111         return s3c64xx_gate(S3C_PCLK_GATE, clk, enable);
 112 }
 113
 114 static int s3c64xx_hclk_ctrl(struct clk *clk, int enable)
 115 {
 116         return s3c64xx_gate(S3C_HCLK_GATE, clk, enable);
 117 }
 118
 119 int s3c64xx_sclk_ctrl(struct clk *clk, int enable)
 120 {
 121         return s3c64xx_gate(S3C_SCLK_GATE, clk, enable);
 122 }
 123
 124 static struct clk init_clocks_disable[] = {
 125         {
 126                 .name           = "nand",
 127                 .id             = -1,
 128                 .parent         = &clk_h,
 129         }, {
 130                 .name           = "adc",
 131                 .id             = -1,
 132                 .parent         = &clk_p,
 133                 .enable         = s3c64xx_pclk_ctrl,
 134                 .ctrlbit        = S3C_CLKCON_PCLK_TSADC,
 135         }, {
 136                 .name           = "i2c",
 137                 .id             = -1,
 138                 .parent         = &clk_p,
 139                 .enable         = s3c64xx_pclk_ctrl,
 140                 .ctrlbit        = S3C_CLKCON_PCLK_IIC,
 141         }, {
 142                 .name           = "iis",
 143                 .id             = 0,
 144                 .parent         = &clk_p,
 145                 .enable         = s3c64xx_pclk_ctrl,
 146                 .ctrlbit        = S3C_CLKCON_PCLK_IIS0,
 147         }, {
 148                 .name           = "iis",
 149                 .id             = 1,
 150                 .parent         = &clk_p,
 151                 .enable         = s3c64xx_pclk_ctrl,
 152                 .ctrlbit        = S3C_CLKCON_PCLK_IIS1,
 153         }, {
 154 #ifdef CONFIG_CPU_S3C6410
 155                 .name           = "iis",
 156                 .id             = -1,  /* There's only one IISv4 port */
 157                 .parent         = &clk_p,
 158                 .enable         = s3c64xx_pclk_ctrl,
 159                 .ctrlbit        = S3C6410_CLKCON_PCLK_IIS2,
 160         }, {
 161 #endif
 162                 .name           = "spi",
 163                 .id             = 0,
 164                 .parent         = &clk_p,
 165                 .enable         = s3c64xx_pclk_ctrl,
 166                 .ctrlbit        = S3C_CLKCON_PCLK_SPI0,
 167         }, {
 168                 .name           = "spi",
 169                 .id             = 1,
 170                 .parent         = &clk_p,
 171                 .enable         = s3c64xx_pclk_ctrl,
 172                 .ctrlbit        = S3C_CLKCON_PCLK_SPI1,
 173         }, {
 174                 .name           = "spi_48m",
 175                 .id             = 0,
 176                 .parent         = &clk_48m,
 177                 .enable         = s3c64xx_sclk_ctrl,
 178                 .ctrlbit        = S3C_CLKCON_SCLK_SPI0_48,
 179         }, {
 180                 .name           = "spi_48m",
 181                 .id             = 1,
 182                 .parent         = &clk_48m,
 183                 .enable         = s3c64xx_sclk_ctrl,
 184                 .ctrlbit        = S3C_CLKCON_SCLK_SPI1_48,
 185         }, {
 186                 .name           = "48m",
 187                 .id             = 0,
 188                 .parent         = &clk_48m,
 189                 .enable         = s3c64xx_sclk_ctrl,
 190                 .ctrlbit        = S3C_CLKCON_SCLK_MMC0_48,
 191         }, {
 192                 .name           = "48m",
 193                 .id             = 1,
 194                 .parent         = &clk_48m,
 195                 .enable         = s3c64xx_sclk_ctrl,
 196                 .ctrlbit        = S3C_CLKCON_SCLK_MMC1_48,
 197         }, {
 198                 .name           = "48m",
 199                 .id             = 2,
 200                 .parent         = &clk_48m,
 201                 .enable         = s3c64xx_sclk_ctrl,
 202                 .ctrlbit        = S3C_CLKCON_SCLK_MMC2_48,
 203         }, {
 204                 .name           = "dma0",
 205                 .id             = -1,
 206                 .parent         = &clk_h,
 207                 .enable         = s3c64xx_hclk_ctrl,
 208                 .ctrlbit        = S3C_CLKCON_HCLK_DMA0,
 209         }, {
 210                 .name           = "dma1",
 211                 .id             = -1,
 212                 .parent         = &clk_h,
 213                 .enable         = s3c64xx_hclk_ctrl,
 214                 .ctrlbit        = S3C_CLKCON_HCLK_DMA1,
 215         },
 216 };
 217
 218 static struct clk init_clocks[] = {
 219         {
 220                 .name           = "lcd",
 221                 .id             = -1,
 222                 .parent         = &clk_h,
 223                 .enable         = s3c64xx_hclk_ctrl,
 224                 .ctrlbit        = S3C_CLKCON_HCLK_LCD,
 225         }, {
 226                 .name           = "gpio",
 227                 .id             = -1,
 228                 .parent         = &clk_p,
 229                 .enable         = s3c64xx_pclk_ctrl,
 230                 .ctrlbit        = S3C_CLKCON_PCLK_GPIO,
 231         }, {
 232                 .name           = "usb-host",
 233                 .id             = -1,
 234                 .parent         = &clk_h,
 235                 .enable         = s3c64xx_hclk_ctrl,
 236                 .ctrlbit        = S3C_CLKCON_HCLK_UHOST,
 237         }, {
 238                 .name           = "hsmmc",
 239                 .id             = 0,
 240                 .parent         = &clk_h,
 241                 .enable         = s3c64xx_hclk_ctrl,
 242                 .ctrlbit        = S3C_CLKCON_HCLK_HSMMC0,
 243         }, {
 244                 .name           = "hsmmc",
 245                 .id             = 1,
 246                 .parent         = &clk_h,
 247                 .enable         = s3c64xx_hclk_ctrl,
 248                 .ctrlbit        = S3C_CLKCON_HCLK_HSMMC1,
 249         }, {
 250                 .name           = "hsmmc",
 251                 .id             = 2,
 252                 .parent         = &clk_h,
 253                 .enable         = s3c64xx_hclk_ctrl,
 254                 .ctrlbit        = S3C_CLKCON_HCLK_HSMMC2,
 255         }, {
 256                 .name           = "timers",
 257                 .id             = -1,
 258                 .parent         = &clk_p,
 259                 .enable         = s3c64xx_pclk_ctrl,
 260                 .ctrlbit        = S3C_CLKCON_PCLK_PWM,
 261         }, {
 262                 .name           = "uart",
 263                 .id             = 0,
 264                 .parent         = &clk_p,
 265                 .enable         = s3c64xx_pclk_ctrl,
 266                 .ctrlbit        = S3C_CLKCON_PCLK_UART0,
 267         }, {
 268                 .name           = "uart",
 269                 .id             = 1,
 270                 .parent         = &clk_p,
 271                 .enable         = s3c64xx_pclk_ctrl,
 272                 .ctrlbit        = S3C_CLKCON_PCLK_UART1,
 273         }, {
 274                 .name           = "uart",
 275                 .id             = 2,
 276                 .parent         = &clk_p,
 277                 .enable         = s3c64xx_pclk_ctrl,
 278                 .ctrlbit        = S3C_CLKCON_PCLK_UART2,
 279         }, {
 280                 .name           = "uart",
 281                 .id             = 3,
 282                 .parent         = &clk_p,
 283                 .enable         = s3c64xx_pclk_ctrl,
 284                 .ctrlbit        = S3C_CLKCON_PCLK_UART3,
 285         }, {
 286                 .name           = "rtc",
 287                 .id             = -1,
 288                 .parent         = &clk_p,
 289                 .enable         = s3c64xx_pclk_ctrl,
 290                 .ctrlbit        = S3C_CLKCON_PCLK_RTC,
 291         }, {
 292                 .name           = "watchdog",
 293                 .id             = -1,
 294                 .parent         = &clk_p,
 295                 .ctrlbit        = S3C_CLKCON_PCLK_WDT,
 296         }, {
 297                 .name           = "ac97",
 298                 .id             = -1,
 299                 .parent         = &clk_p,
 300                 .ctrlbit        = S3C_CLKCON_PCLK_AC97,
 301         }
 302 };
 303
 304
 305 static struct clk clk_fout_apll = {
 306         .name           = "fout_apll",
 307         .id             = -1,
 308 };
 309
 310 static struct clk *clk_src_apll_list[] = {
 311         [0] = &clk_fin_apll,
 312         [1] = &clk_fout_apll,
 313 };
 314
 315 static struct clksrc_sources clk_src_apll = {
 316         .sources        = clk_src_apll_list,
 317         .nr_sources     = ARRAY_SIZE(clk_src_apll_list),
 318 };
 319
 320 static struct clksrc_clk clk_mout_apll = {
 321         .clk    = {
 322                 .name           = "mout_apll",
 323                 .id             = -1,
 324         },
 325         .reg_src        = { .reg = S3C_CLK_SRC, .shift = 0, .size = 1  },
 326         .sources        = &clk_src_apll,
 327 };
 328
 329 static struct clk *clk_src_epll_list[] = {
 330         [0] = &clk_fin_epll,
 331         [1] = &clk_fout_epll,
 332 };
 333
 334 static struct clksrc_sources clk_src_epll = {
 335         .sources        = clk_src_epll_list,
 336         .nr_sources     = ARRAY_SIZE(clk_src_epll_list),
 337 };
 338
 339 static struct clksrc_clk clk_mout_epll = {
 340         .clk    = {
 341                 .name           = "mout_epll",
 342                 .id             = -1,
 343         },
 344         .reg_src        = { .reg = S3C_CLK_SRC, .shift = 2, .size = 1  },
 345         .sources        = &clk_src_epll,
 346 };
 347
 348 static struct clk *clk_src_mpll_list[] = {
 349         [0] = &clk_fin_mpll,
 350         [1] = &clk_fout_mpll,
 351 };
 352
 353 static struct clksrc_sources clk_src_mpll = {
 354         .sources        = clk_src_mpll_list,
 355         .nr_sources     = ARRAY_SIZE(clk_src_mpll_list),
 356 };
 357
 358 static struct clksrc_clk clk_mout_mpll = {
 359         .clk = {
 360                 .name           = "mout_mpll",
 361                 .id             = -1,
 362         },
 363         .reg_src        = { .reg = S3C_CLK_SRC, .shift = 1, .size = 1  },
 364         .sources        = &clk_src_mpll,
 365 };
 366
 367 static unsigned int armclk_mask;
 368
 369 static unsigned long s3c64xx_clk_arm_get_rate(struct clk *clk)
 370 {
 371         unsigned long rate = clk_get_rate(clk->parent);
 372         u32 clkdiv;
 373
 374         /* divisor mask starts at bit0, so no need to shift */
 375         clkdiv = __raw_readl(S3C_CLK_DIV0) & armclk_mask;
 376
 377         return rate / (clkdiv + 1);
 378 }
 379
 380 static unsigned long s3c64xx_clk_arm_round_rate(struct clk *clk,
 381                                                 unsigned long rate)
 382 {
 383         unsigned long parent = clk_get_rate(clk->parent);
 384         u32 div;
 385
 386         if (parent < rate)
 387                 return parent;
 388
 389         div = (parent / rate) - 1;
 390         if (div > armclk_mask)
 391                 div = armclk_mask;
 392
 393         return parent / (div + 1);
 394 }
 395
 396 static int s3c64xx_clk_arm_set_rate(struct clk *clk, unsigned long rate)
 397 {
 398         unsigned long parent = clk_get_rate(clk->parent);
 399         u32 div;
 400         u32 val;
 401
 402         if (rate < parent / (armclk_mask + 1))
 403                 return -EINVAL;
 404
 405         rate = clk_round_rate(clk, rate);
 406         div = clk_get_rate(clk->parent) / rate;
 407
 408         val = __raw_readl(S3C_CLK_DIV0);
 409         val &= ~armclk_mask;
 410         val |= (div - 1);
 411         __raw_writel(val, S3C_CLK_DIV0);
 412
 413         return 0;
 414
 415 }
 416
 417 static struct clk clk_arm = {
 418         .name           = "armclk",
 419         .id             = -1,
 420         .parent         = &clk_mout_apll.clk,
 421         .ops            = &(struct clk_ops) {
 422                 .get_rate       = s3c64xx_clk_arm_get_rate,
 423                 .set_rate       = s3c64xx_clk_arm_set_rate,
 424                 .round_rate     = s3c64xx_clk_arm_round_rate,
 425         },
 426 };
 427
 428 static unsigned long s3c64xx_clk_doutmpll_get_rate(struct clk *clk)
 429 {
 430         unsigned long rate = clk_get_rate(clk->parent);
 431
 432         printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate);
 433
 434         if (__raw_readl(S3C_CLK_DIV0) & S3C6400_CLKDIV0_MPLL_MASK)
 435                 rate /= 2;
 436
 437         return rate;
 438 }
 439
 440 static struct clk_ops clk_dout_ops = {
 441         .get_rate       = s3c64xx_clk_doutmpll_get_rate,
 442 };
 443
 444 static struct clk clk_dout_mpll = {
 445         .name           = "dout_mpll",
 446         .id             = -1,
 447         .parent         = &clk_mout_mpll.clk,
 448         .ops            = &clk_dout_ops,
 449 };
 450
 451 static struct clk *clkset_spi_mmc_list[] = {
 452         &clk_mout_epll.clk,
 453         &clk_dout_mpll,
 454         &clk_fin_epll,
 455         &clk_27m,
 456 };
 457
 458 static struct clksrc_sources clkset_spi_mmc = {
 459         .sources        = clkset_spi_mmc_list,
 460         .nr_sources     = ARRAY_SIZE(clkset_spi_mmc_list),
 461 };
 462
 463 static struct clk *clkset_irda_list[] = {
 464         &clk_mout_epll.clk,
 465         &clk_dout_mpll,
 466         NULL,
 467         &clk_27m,
 468 };
 469
 470 static struct clksrc_sources clkset_irda = {
 471         .sources        = clkset_irda_list,
 472         .nr_sources     = ARRAY_SIZE(clkset_irda_list),
 473 };
 474
 475 static struct clk *clkset_uart_list[] = {
 476         &clk_mout_epll.clk,
 477         &clk_dout_mpll,
 478         NULL,
 479         NULL
 480 };
 481
 482 static struct clksrc_sources clkset_uart = {
 483         .sources        = clkset_uart_list,
 484         .nr_sources     = ARRAY_SIZE(clkset_uart_list),
 485 };
 486
 487 static struct clk *clkset_uhost_list[] = {
 488         &clk_48m,
 489         &clk_mout_epll.clk,
 490         &clk_dout_mpll,
 491         &clk_fin_epll,
 492 };
 493
 494 static struct clksrc_sources clkset_uhost = {
 495         .sources        = clkset_uhost_list,
 496         .nr_sources     = ARRAY_SIZE(clkset_uhost_list),
 497 };
 498
 499 /* The peripheral clocks are all controlled via clocksource followed
 500  * by an optional divider and gate stage. We currently roll this into
 501  * one clock which hides the intermediate clock from the mux.
 502  *
 503  * Note, the JPEG clock can only be an even divider...
 504  *
 505  * The scaler and LCD clocks depend on the S3C64XX version, and also
 506  * have a common parent divisor so are not included here.
 507  */
 508
 509 /* clocks that feed other parts of the clock source tree */
 510
 511 static struct clk clk_iis_cd0 = {
 512         .name           = "iis_cdclk0",
 513         .id             = -1,
 514 };
 515
 516 static struct clk clk_iis_cd1 = {
 517         .name           = "iis_cdclk1",
 518         .id             = -1,
 519 };
 520
 521 static struct clk clk_pcm_cd = {
 522         .name           = "pcm_cdclk",
 523         .id             = -1,
 524 };
 525
 526 static struct clk *clkset_audio0_list[] = {
 527         [0] = &clk_mout_epll.clk,
 528         [1] = &clk_dout_mpll,
 529         [2] = &clk_fin_epll,
 530         [3] = &clk_iis_cd0,
 531         [4] = &clk_pcm_cd,
 532 };
 533
 534 static struct clksrc_sources clkset_audio0 = {
 535         .sources        = clkset_audio0_list,
 536         .nr_sources     = ARRAY_SIZE(clkset_audio0_list),
 537 };
 538
 539 static struct clk *clkset_audio1_list[] = {
 540         [0] = &clk_mout_epll.clk,
 541         [1] = &clk_dout_mpll,
 542         [2] = &clk_fin_epll,
 543         [3] = &clk_iis_cd1,
 544         [4] = &clk_pcm_cd,
 545 };
 546
 547 static struct clksrc_sources clkset_audio1 = {
 548         .sources        = clkset_audio1_list,
 549         .nr_sources     = ARRAY_SIZE(clkset_audio1_list),
 550 };
 551
 552 static struct clk *clkset_camif_list[] = {
 553         &clk_h2,
 554 };
 555
 556 static struct clksrc_sources clkset_camif = {
 557         .sources        = clkset_camif_list,
 558         .nr_sources     = ARRAY_SIZE(clkset_camif_list),
 559 };
 560
 561 static struct clksrc_clk clksrcs[] = {
 562         {
 563                 .clk    = {
 564                         .name           = "mmc_bus",
 565                         .id             = 0,
 566                         .ctrlbit        = S3C_CLKCON_SCLK_MMC0,
 567                         .enable         = s3c64xx_sclk_ctrl,
 568                 },
 569                 .reg_src        = { .reg = S3C_CLK_SRC, .shift = 18, .size = 2  },
 570                 .reg_div        = { .reg = S3C_CLK_DIV1, .shift = 0, .size = 4  },
 571                 .sources        = &clkset_spi_mmc,
 572         }, {
 573                 .clk    = {
 574                         .name           = "mmc_bus",
 575                         .id             = 1,
 576                         .ctrlbit        = S3C_CLKCON_SCLK_MMC1,
 577                         .enable         = s3c64xx_sclk_ctrl,
 578                 },
 579                 .reg_src        = { .reg = S3C_CLK_SRC, .shift = 20, .size = 2  },
 580                 .reg_div        = { .reg = S3C_CLK_DIV1, .shift = 4, .size = 4  },
 581                 .sources        = &clkset_spi_mmc,
 582         }, {
 583                 .clk    = {
 584                         .name           = "mmc_bus",
 585                         .id             = 2,
 586                         .ctrlbit        = S3C_CLKCON_SCLK_MMC2,
 587                         .enable         = s3c64xx_sclk_ctrl,
 588                 },
 589                 .reg_src        = { .reg = S3C_CLK_SRC, .shift = 22, .size = 2  },
 590                 .reg_div        = { .reg = S3C_CLK_DIV1, .shift = 8, .size = 4  },
 591                 .sources        = &clkset_spi_mmc,
 592         }, {
 593                 .clk    = {
 594                         .name           = "usb-bus-host",
 595                         .id             = -1,
 596                         .ctrlbit        = S3C_CLKCON_SCLK_UHOST,
 597                         .enable         = s3c64xx_sclk_ctrl,
 598                 },
 599                 .reg_src        = { .reg = S3C_CLK_SRC, .shift = 5, .size = 2  },
 600                 .reg_div        = { .reg = S3C_CLK_DIV1, .shift = 20, .size = 4  },
 601                 .sources        = &clkset_uhost,
 602         }, {
 603                 .clk    = {
 604                         .name           = "uclk1",
 605                         .id             = -1,
 606                         .ctrlbit        = S3C_CLKCON_SCLK_UART,
 607                         .enable         = s3c64xx_sclk_ctrl,
 608                 },
 609                 .reg_src        = { .reg = S3C_CLK_SRC, .shift = 13, .size = 1  },
 610                 .reg_div        = { .reg = S3C_CLK_DIV2, .shift = 16, .size = 4  },
 611                 .sources        = &clkset_uart,
 612         }, {
 613 /* Where does UCLK0 come from? */
 614                 .clk    = {
 615                         .name           = "spi-bus",
 616                         .id             = 0,
 617                         .ctrlbit        = S3C_CLKCON_SCLK_SPI0,
 618                         .enable         = s3c64xx_sclk_ctrl,
 619                 },
 620                 .reg_src        = { .reg = S3C_CLK_SRC, .shift = 14, .size = 2  },
 621                 .reg_div        = { .reg = S3C_CLK_DIV2, .shift = 0, .size = 4  },
 622                 .sources        = &clkset_spi_mmc,
 623         }, {
 624                 .clk    = {
 625                         .name           = "spi-bus",
 626                         .id             = 1,
 627                         .ctrlbit        = S3C_CLKCON_SCLK_SPI1,
 628                         .enable         = s3c64xx_sclk_ctrl,
 629                 },
 630                 .reg_src        = { .reg = S3C_CLK_SRC, .shift = 16, .size = 2  },
 631                 .reg_div        = { .reg = S3C_CLK_DIV2, .shift = 4, .size = 4  },
 632                 .sources        = &clkset_spi_mmc,
 633         }, {
 634                 .clk    = {
 635                         .name           = "audio-bus",
 636                         .id             = 0,
 637                         .ctrlbit        = S3C_CLKCON_SCLK_AUDIO0,
 638                         .enable         = s3c64xx_sclk_ctrl,
 639                 },
 640                 .reg_src        = { .reg = S3C_CLK_SRC, .shift = 7, .size = 3  },
 641                 .reg_div        = { .reg = S3C_CLK_DIV2, .shift = 8, .size = 4  },
 642                 .sources        = &clkset_audio0,
 643         }, {
 644                 .clk    = {
 645                         .name           = "audio-bus",
 646                         .id             = 1,
 647                         .ctrlbit        = S3C_CLKCON_SCLK_AUDIO1,
 648                         .enable         = s3c64xx_sclk_ctrl,
 649                 },
 650                 .reg_src        = { .reg = S3C_CLK_SRC, .shift = 10, .size = 3  },
 651                 .reg_div        = { .reg = S3C_CLK_DIV2, .shift = 12, .size = 4  },
 652                 .sources        = &clkset_audio1,
 653         }, {
 654                 .clk    = {
 655                         .name           = "irda-bus",
 656                         .id             = 0,
 657                         .ctrlbit        = S3C_CLKCON_SCLK_IRDA,
 658                         .enable         = s3c64xx_sclk_ctrl,
 659                 },
 660                 .reg_src        = { .reg = S3C_CLK_SRC, .shift = 24, .size = 2  },
 661                 .reg_div        = { .reg = S3C_CLK_DIV2, .shift = 20, .size = 4  },
 662                 .sources        = &clkset_irda,
 663         }, {
 664                 .clk    = {
 665                         .name           = "camera",
 666                         .id             = -1,
 667                         .ctrlbit        = S3C_CLKCON_SCLK_CAM,
 668                         .enable         = s3c64xx_sclk_ctrl,
 669                 },
 670                 .reg_div        = { .reg = S3C_CLK_DIV0, .shift = 20, .size = 4  },
 671                 .reg_src        = { .reg = NULL, .shift = 0, .size = 0  },
 672                 .sources        = &clkset_camif,
 673         },
 674 };
 675
 676 /* Clock initialisation code */
 677
 678 static struct clksrc_clk *init_parents[] = {
 679         &clk_mout_apll,
 680         &clk_mout_epll,
 681         &clk_mout_mpll,
 682 };
 683
 684 #define GET_DIV(clk, field) ((((clk) & field##_MASK) >> field##_SHIFT) + 1)
 685
 686 void __init_or_cpufreq s3c6400_setup_clocks(void)
 687 {
 688         struct clk *xtal_clk;
 689         unsigned long xtal;
 690         unsigned long fclk;
 691         unsigned long hclk;
 692         unsigned long hclk2;
 693         unsigned long pclk;
 694         unsigned long epll;
 695         unsigned long apll;
 696         unsigned long mpll;
 697         unsigned int ptr;
 698         u32 clkdiv0;
 699
 700         printk(KERN_DEBUG "%s: registering clocks\n", __func__);
 701
 702         clkdiv0 = __raw_readl(S3C_CLK_DIV0);
 703         printk(KERN_DEBUG "%s: clkdiv0 = %08x\n", __func__, clkdiv0);
 704
 705         xtal_clk = clk_get(NULL, "xtal");
 706         BUG_ON(IS_ERR(xtal_clk));
 707
 708         xtal = clk_get_rate(xtal_clk);
 709         clk_put(xtal_clk);
 710
 711         printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal);
 712
 713         /* For now assume the mux always selects the crystal */
 714         clk_ext_xtal_mux.parent = xtal_clk;
 715
 716         epll = s3c6400_get_epll(xtal);
 717         mpll = s3c6400_get_pll(xtal, __raw_readl(S3C_MPLL_CON));
 718         apll = s3c6400_get_pll(xtal, __raw_readl(S3C_APLL_CON));
 719
 720         fclk = mpll;
 721
 722         printk(KERN_INFO "S3C64XX: PLL settings, A=%ld, M=%ld, E=%ld\n",
 723                apll, mpll, epll);
 724
 725         hclk2 = mpll / GET_DIV(clkdiv0, S3C6400_CLKDIV0_HCLK2);
 726         hclk = hclk2 / GET_DIV(clkdiv0, S3C6400_CLKDIV0_HCLK);
 727         pclk = hclk2 / GET_DIV(clkdiv0, S3C6400_CLKDIV0_PCLK);
 728
 729         printk(KERN_INFO "S3C64XX: HCLK2=%ld, HCLK=%ld, PCLK=%ld\n",
 730                hclk2, hclk, pclk);
 731
 732         clk_fout_mpll.rate = mpll;
 733         clk_fout_epll.rate = epll;
 734         clk_fout_apll.rate = apll;
 735
 736         clk_h2.rate = hclk2;
 737         clk_h.rate = hclk;
 738         clk_p.rate = pclk;
 739         clk_f.rate = fclk;
 740
 741         for (ptr = 0; ptr < ARRAY_SIZE(init_parents); ptr++)
 742                 s3c_set_clksrc(init_parents[ptr], true);
 743
 744         for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
 745                 s3c_set_clksrc(&clksrcs[ptr], true);
 746 }
 747
 748 static struct clk *clks1[] __initdata = {
 749         &clk_ext_xtal_mux,
 750         &clk_iis_cd0,
 751         &clk_iis_cd1,
 752         &clk_pcm_cd,
 753         &clk_mout_epll.clk,
 754         &clk_mout_mpll.clk,
 755         &clk_dout_mpll,
 756         &clk_arm,
 757 };
 758
 759 static struct clk *clks[] __initdata = {
 760         &clk_ext,
 761         &clk_epll,
 762         &clk_27m,
 763         &clk_48m,
 764         &clk_h2,
 765 };
 766
 767 /**
 768  * s3c64xx_register_clocks - register clocks for s3c6400 and s3c6410
 769  * @xtal: The rate for the clock crystal feeding the PLLs.
 770  * @armclk_divlimit: Divisor mask for ARMCLK.
 771  *
 772  * Register the clocks for the S3C6400 and S3C6410 SoC range, such
 773  * as ARMCLK as well as the necessary parent clocks.
 774  *
 775  * This call does not setup the clocks, which is left to the
 776  * s3c6400_setup_clocks() call which may be needed by the cpufreq
 777  * or resume code to re-set the clocks if the bootloader has changed
 778  * them.
 779  */
 780 void __init s3c64xx_register_clocks(unsigned long xtal,
 781                                     unsigned armclk_divlimit)
 782 {
 783         struct clk *clkp;
 784         int ret;
 785         int ptr;
 786
 787         armclk_mask = armclk_divlimit;
 788
 789         s3c24xx_register_baseclocks(xtal);
 790         s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
 791
 792         s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
 793
 794         clkp = init_clocks_disable;
 795         for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) {
 796
 797                 ret = s3c24xx_register_clock(clkp);
 798                 if (ret < 0) {
 799                         printk(KERN_ERR "Failed to register clock %s (%d)\n",
 800                                clkp->name, ret);
 801                 }
 802
 803                 (clkp->enable)(clkp, 0);
 804         }
 805
 806         s3c24xx_register_clocks(clks1, ARRAY_SIZE(clks1));
 807         s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
 808         s3c_pwmclk_init();
 809 }