arch/arm/mach-s3c2440/mach-osiris.c

   1 /* linux/arch/arm/mach-s3c2440/mach-osiris.c
   2  *
   3  * Copyright (c) 2005,2008 Simtec Electronics
   4  *      http://armlinux.simtec.co.uk/
   5  *      Ben Dooks <ben@simtec.co.uk>
   6  *
   7  * This program is free software; you can redistribute it and/or modify
   8  * it under the terms of the GNU General Public License version 2 as
   9  * published by the Free Software Foundation.
  10 */
  11
  12 #include <linux/kernel.h>
  13 #include <linux/types.h>
  14 #include <linux/interrupt.h>
  15 #include <linux/list.h>
  16 #include <linux/timer.h>
  17 #include <linux/init.h>
  18 #include <linux/gpio.h>
  19 #include <linux/device.h>
  20 #include <linux/sysdev.h>
  21 #include <linux/serial_core.h>
  22 #include <linux/clk.h>
  23 #include <linux/i2c.h>
  24 #include <linux/io.h>
  25
  26 #include <asm/mach/arch.h>
  27 #include <asm/mach/map.h>
  28 #include <asm/mach/irq.h>
  29
  30 #include <mach/osiris-map.h>
  31 #include <mach/osiris-cpld.h>
  32
  33 #include <mach/hardware.h>
  34 #include <asm/irq.h>
  35 #include <asm/mach-types.h>
  36
  37 #include <plat/cpu-freq.h>
  38 #include <plat/regs-serial.h>
  39 #include <mach/regs-gpio.h>
  40 #include <mach/regs-mem.h>
  41 #include <mach/regs-lcd.h>
  42 #include <plat/nand.h>
  43 #include <plat/iic.h>
  44
  45 #include <linux/mtd/mtd.h>
  46 #include <linux/mtd/nand.h>
  47 #include <linux/mtd/nand_ecc.h>
  48 #include <linux/mtd/partitions.h>
  49
  50 #include <plat/clock.h>
  51 #include <plat/devs.h>
  52 #include <plat/cpu.h>
  53
  54 /* onboard perihperal map */
  55
  56 static struct map_desc osiris_iodesc[] __initdata = {
  57   /* ISA IO areas (may be over-written later) */
  58
  59   {
  60           .virtual      = (u32)S3C24XX_VA_ISA_BYTE,
  61           .pfn          = __phys_to_pfn(S3C2410_CS5),
  62           .length       = SZ_16M,
  63           .type         = MT_DEVICE,
  64   }, {
  65           .virtual      = (u32)S3C24XX_VA_ISA_WORD,
  66           .pfn          = __phys_to_pfn(S3C2410_CS5),
  67           .length       = SZ_16M,
  68           .type         = MT_DEVICE,
  69   },
  70
  71   /* CPLD control registers */
  72
  73   {
  74           .virtual      = (u32)OSIRIS_VA_CTRL0,
  75           .pfn          = __phys_to_pfn(OSIRIS_PA_CTRL0),
  76           .length       = SZ_16K,
  77           .type         = MT_DEVICE,
  78   }, {
  79           .virtual      = (u32)OSIRIS_VA_CTRL1,
  80           .pfn          = __phys_to_pfn(OSIRIS_PA_CTRL1),
  81           .length       = SZ_16K,
  82           .type         = MT_DEVICE,
  83   }, {
  84           .virtual      = (u32)OSIRIS_VA_CTRL2,
  85           .pfn          = __phys_to_pfn(OSIRIS_PA_CTRL2),
  86           .length       = SZ_16K,
  87           .type         = MT_DEVICE,
  88   }, {
  89           .virtual      = (u32)OSIRIS_VA_IDREG,
  90           .pfn          = __phys_to_pfn(OSIRIS_PA_IDREG),
  91           .length       = SZ_16K,
  92           .type         = MT_DEVICE,
  93   },
  94 };
  95
  96 #define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
  97 #define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
  98 #define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
  99
 100 static struct s3c24xx_uart_clksrc osiris_serial_clocks[] = {
 101         [0] = {
 102                 .name           = "uclk",
 103                 .divisor        = 1,
 104                 .min_baud       = 0,
 105                 .max_baud       = 0,
 106         },
 107         [1] = {
 108                 .name           = "pclk",
 109                 .divisor        = 1,
 110                 .min_baud       = 0,
 111                 .max_baud       = 0,
 112         }
 113 };
 114
 115 static struct s3c2410_uartcfg osiris_uartcfgs[] __initdata = {
 116         [0] = {
 117                 .hwport      = 0,
 118                 .flags       = 0,
 119                 .ucon        = UCON,
 120                 .ulcon       = ULCON,
 121                 .ufcon       = UFCON,
 122                 .clocks      = osiris_serial_clocks,
 123                 .clocks_size = ARRAY_SIZE(osiris_serial_clocks),
 124         },
 125         [1] = {
 126                 .hwport      = 1,
 127                 .flags       = 0,
 128                 .ucon        = UCON,
 129                 .ulcon       = ULCON,
 130                 .ufcon       = UFCON,
 131                 .clocks      = osiris_serial_clocks,
 132                 .clocks_size = ARRAY_SIZE(osiris_serial_clocks),
 133         },
 134         [2] = {
 135                 .hwport      = 2,
 136                 .flags       = 0,
 137                 .ucon        = UCON,
 138                 .ulcon       = ULCON,
 139                 .ufcon       = UFCON,
 140                 .clocks      = osiris_serial_clocks,
 141                 .clocks_size = ARRAY_SIZE(osiris_serial_clocks),
 142         }
 143 };
 144
 145 /* NAND Flash on Osiris board */
 146
 147 static int external_map[]   = { 2 };
 148 static int chip0_map[]      = { 0 };
 149 static int chip1_map[]      = { 1 };
 150
 151 static struct mtd_partition osiris_default_nand_part[] = {
 152         [0] = {
 153                 .name   = "Boot Agent",
 154                 .size   = SZ_16K,
 155                 .offset = 0,
 156         },
 157         [1] = {
 158                 .name   = "/boot",
 159                 .size   = SZ_4M - SZ_16K,
 160                 .offset = SZ_16K,
 161         },
 162         [2] = {
 163                 .name   = "user1",
 164                 .offset = SZ_4M,
 165                 .size   = SZ_32M - SZ_4M,
 166         },
 167         [3] = {
 168                 .name   = "user2",
 169                 .offset = SZ_32M,
 170                 .size   = MTDPART_SIZ_FULL,
 171         }
 172 };
 173
 174 static struct mtd_partition osiris_default_nand_part_large[] = {
 175         [0] = {
 176                 .name   = "Boot Agent",
 177                 .size   = SZ_128K,
 178                 .offset = 0,
 179         },
 180         [1] = {
 181                 .name   = "/boot",
 182                 .size   = SZ_4M - SZ_128K,
 183                 .offset = SZ_128K,
 184         },
 185         [2] = {
 186                 .name   = "user1",
 187                 .offset = SZ_4M,
 188                 .size   = SZ_32M - SZ_4M,
 189         },
 190         [3] = {
 191                 .name   = "user2",
 192                 .offset = SZ_32M,
 193                 .size   = MTDPART_SIZ_FULL,
 194         }
 195 };
 196
 197 /* the Osiris has 3 selectable slots for nand-flash, the two
 198  * on-board chip areas, as well as the external slot.
 199  *
 200  * Note, there is no current hot-plug support for the External
 201  * socket.
 202 */
 203
 204 static struct s3c2410_nand_set osiris_nand_sets[] = {
 205         [1] = {
 206                 .name           = "External",
 207                 .nr_chips       = 1,
 208                 .nr_map         = external_map,
 209                 .nr_partitions  = ARRAY_SIZE(osiris_default_nand_part),
 210                 .partitions     = osiris_default_nand_part,
 211         },
 212         [0] = {
 213                 .name           = "chip0",
 214                 .nr_chips       = 1,
 215                 .nr_map         = chip0_map,
 216                 .nr_partitions  = ARRAY_SIZE(osiris_default_nand_part),
 217                 .partitions     = osiris_default_nand_part,
 218         },
 219         [2] = {
 220                 .name           = "chip1",
 221                 .nr_chips       = 1,
 222                 .nr_map         = chip1_map,
 223                 .nr_partitions  = ARRAY_SIZE(osiris_default_nand_part),
 224                 .partitions     = osiris_default_nand_part,
 225         },
 226 };
 227
 228 static void osiris_nand_select(struct s3c2410_nand_set *set, int slot)
 229 {
 230         unsigned int tmp;
 231
 232         slot = set->nr_map[slot] & 3;
 233
 234         pr_debug("osiris_nand: selecting slot %d (set %p,%p)\n",
 235                  slot, set, set->nr_map);
 236
 237         tmp = __raw_readb(OSIRIS_VA_CTRL0);
 238         tmp &= ~OSIRIS_CTRL0_NANDSEL;
 239         tmp |= slot;
 240
 241         pr_debug("osiris_nand: ctrl0 now %02x\n", tmp);
 242
 243         __raw_writeb(tmp, OSIRIS_VA_CTRL0);
 244 }
 245
 246 static struct s3c2410_platform_nand osiris_nand_info = {
 247         .tacls          = 25,
 248         .twrph0         = 60,
 249         .twrph1         = 60,
 250         .nr_sets        = ARRAY_SIZE(osiris_nand_sets),
 251         .sets           = osiris_nand_sets,
 252         .select_chip    = osiris_nand_select,
 253 };
 254
 255 /* PCMCIA control and configuration */
 256
 257 static struct resource osiris_pcmcia_resource[] = {
 258         [0] = {
 259                 .start  = 0x0f000000,
 260                 .end    = 0x0f100000,
 261                 .flags  = IORESOURCE_MEM,
 262         },
 263         [1] = {
 264                 .start  = 0x0c000000,
 265                 .end    = 0x0c100000,
 266                 .flags  = IORESOURCE_MEM,
 267         }
 268 };
 269
 270 static struct platform_device osiris_pcmcia = {
 271         .name           = "osiris-pcmcia",
 272         .id             = -1,
 273         .num_resources  = ARRAY_SIZE(osiris_pcmcia_resource),
 274         .resource       = osiris_pcmcia_resource,
 275 };
 276
 277 /* Osiris power management device */
 278
 279 #ifdef CONFIG_PM
 280 static unsigned char pm_osiris_ctrl0;
 281
 282 static int osiris_pm_suspend(struct sys_device *sd, pm_message_t state)
 283 {
 284         unsigned int tmp;
 285
 286         pm_osiris_ctrl0 = __raw_readb(OSIRIS_VA_CTRL0);
 287         tmp = pm_osiris_ctrl0 & ~OSIRIS_CTRL0_NANDSEL;
 288
 289         /* ensure correct NAND slot is selected on resume */
 290         if ((pm_osiris_ctrl0 & OSIRIS_CTRL0_BOOT_INT) == 0)
 291                 tmp |= 2;
 292
 293         __raw_writeb(tmp, OSIRIS_VA_CTRL0);
 294
 295         /* ensure that an nRESET is not generated on resume. */
 296         s3c2410_gpio_setpin(S3C2410_GPA(21), 1);
 297         s3c2410_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPIO_OUTPUT);
 298
 299         return 0;
 300 }
 301
 302 static int osiris_pm_resume(struct sys_device *sd)
 303 {
 304         if (pm_osiris_ctrl0 & OSIRIS_CTRL0_FIX8)
 305                 __raw_writeb(OSIRIS_CTRL1_FIX8, OSIRIS_VA_CTRL1);
 306
 307         __raw_writeb(pm_osiris_ctrl0, OSIRIS_VA_CTRL0);
 308
 309         s3c2410_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPA21_nRSTOUT);
 310
 311         return 0;
 312 }
 313
 314 #else
 315 #define osiris_pm_suspend NULL
 316 #define osiris_pm_resume NULL
 317 #endif
 318
 319 static struct sysdev_class osiris_pm_sysclass = {
 320         .name           = "mach-osiris",
 321         .suspend        = osiris_pm_suspend,
 322         .resume         = osiris_pm_resume,
 323 };
 324
 325 static struct sys_device osiris_pm_sysdev = {
 326         .cls            = &osiris_pm_sysclass,
 327 };
 328
 329 /* I2C devices fitted. */
 330
 331 static struct i2c_board_info osiris_i2c_devs[] __initdata = {
 332         {
 333                 I2C_BOARD_INFO("tps65011", 0x48),
 334                 .irq    = IRQ_EINT20,
 335         },
 336 };
 337
 338 /* Standard Osiris devices */
 339
 340 static struct platform_device *osiris_devices[] __initdata = {
 341         &s3c_device_i2c0,
 342         &s3c_device_wdt,
 343         &s3c_device_nand,
 344         &osiris_pcmcia,
 345 };
 346
 347 static struct clk *osiris_clocks[] __initdata = {
 348         &s3c24xx_dclk0,
 349         &s3c24xx_dclk1,
 350         &s3c24xx_clkout0,
 351         &s3c24xx_clkout1,
 352         &s3c24xx_uclk,
 353 };
 354
 355 static struct s3c_cpufreq_board __initdata osiris_cpufreq = {
 356         .refresh        = 7800, /* refresh period is 7.8usec */
 357         .auto_io        = 1,
 358         .need_io        = 1,
 359 };
 360
 361 static void __init osiris_map_io(void)
 362 {
 363         unsigned long flags;
 364
 365         /* initialise the clocks */
 366
 367         s3c24xx_dclk0.parent = &clk_upll;
 368         s3c24xx_dclk0.rate   = 12*1000*1000;
 369
 370         s3c24xx_dclk1.parent = &clk_upll;
 371         s3c24xx_dclk1.rate   = 24*1000*1000;
 372
 373         s3c24xx_clkout0.parent  = &s3c24xx_dclk0;
 374         s3c24xx_clkout1.parent  = &s3c24xx_dclk1;
 375
 376         s3c24xx_uclk.parent  = &s3c24xx_clkout1;
 377
 378         s3c24xx_register_clocks(osiris_clocks, ARRAY_SIZE(osiris_clocks));
 379
 380         s3c_device_nand.dev.platform_data = &osiris_nand_info;
 381
 382         s3c24xx_init_io(osiris_iodesc, ARRAY_SIZE(osiris_iodesc));
 383         s3c24xx_init_clocks(0);
 384         s3c24xx_init_uarts(osiris_uartcfgs, ARRAY_SIZE(osiris_uartcfgs));
 385
 386         /* check for the newer revision boards with large page nand */
 387
 388         if ((__raw_readb(OSIRIS_VA_IDREG) & OSIRIS_ID_REVMASK) >= 4) {
 389                 printk(KERN_INFO "OSIRIS-B detected (revision %d)\n",
 390                        __raw_readb(OSIRIS_VA_IDREG) & OSIRIS_ID_REVMASK);
 391                 osiris_nand_sets[0].partitions = osiris_default_nand_part_large;
 392                 osiris_nand_sets[0].nr_partitions = ARRAY_SIZE(osiris_default_nand_part_large);
 393         } else {
 394                 /* write-protect line to the NAND */
 395                 s3c2410_gpio_setpin(S3C2410_GPA(0), 1);
 396         }
 397
 398         /* fix bus configuration (nBE settings wrong on ABLE pre v2.20) */
 399
 400         local_irq_save(flags);
 401         __raw_writel(__raw_readl(S3C2410_BWSCON) | S3C2410_BWSCON_ST1 | S3C2410_BWSCON_ST2 | S3C2410_BWSCON_ST3 | S3C2410_BWSCON_ST4 | S3C2410_BWSCON_ST5, S3C2410_BWSCON);
 402         local_irq_restore(flags);
 403 }
 404
 405 static void __init osiris_init(void)
 406 {
 407         sysdev_class_register(&osiris_pm_sysclass);
 408         sysdev_register(&osiris_pm_sysdev);
 409
 410         s3c_i2c0_set_platdata(NULL);
 411
 412         s3c_cpufreq_setboard(&osiris_cpufreq);
 413
 414         i2c_register_board_info(0, osiris_i2c_devs,
 415                                 ARRAY_SIZE(osiris_i2c_devs));
 416
 417         platform_add_devices(osiris_devices, ARRAY_SIZE(osiris_devices));
 418 };
 419
 420 MACHINE_START(OSIRIS, "Simtec-OSIRIS")
 421         /* Maintainer: Ben Dooks <ben@simtec.co.uk> */
 422         .phys_io        = S3C2410_PA_UART,
 423         .io_pg_offst    = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
 424         .boot_params    = S3C2410_SDRAM_PA + 0x100,
 425         .map_io         = osiris_map_io,
 426         .init_irq       = s3c24xx_init_irq,
 427         .init_machine   = osiris_init,
 428         .timer          = &s3c24xx_timer,
 429 MACHINE_END