arch/arm/mach-pxa/palm27x.c

   1 /*
   2  * Common code for Palm LD, T5, TX, Z72
   3  *
   4  * Copyright (C) 2010
   5  * Marek Vasut <marek.vasut@gmail.com>
   6  *
   7  * This program is free software; you can redistribute it and/or modify
   8  * it under the terms of the GNU General Public License version 2 as
   9  * published by the Free Software Foundation.
  10  *
  11  */
  12
  13 #include <linux/platform_device.h>
  14 #include <linux/delay.h>
  15 #include <linux/irq.h>
  16 #include <linux/gpio_keys.h>
  17 #include <linux/input.h>
  18 #include <linux/pda_power.h>
  19 #include <linux/pwm_backlight.h>
  20 #include <linux/gpio.h>
  21 #include <linux/wm97xx.h>
  22 #include <linux/power_supply.h>
  23 #include <linux/usb/gpio_vbus.h>
  24 #include <linux/regulator/max1586.h>
  25
  26 #include <asm/mach-types.h>
  27 #include <asm/mach/arch.h>
  28 #include <asm/mach/map.h>
  29
  30 #include <mach/pxa27x.h>
  31 #include <mach/audio.h>
  32 #include <mach/mmc.h>
  33 #include <mach/pxafb.h>
  34 #include <mach/irda.h>
  35 #include <mach/udc.h>
  36 #include <mach/palmasoc.h>
  37 #include <mach/palm27x.h>
  38
  39 #include <plat/i2c.h>
  40
  41 #include "generic.h"
  42 #include "devices.h"
  43
  44 /******************************************************************************
  45  * SD/MMC card controller
  46  ******************************************************************************/
  47 #if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
  48 static struct pxamci_platform_data palm27x_mci_platform_data = {
  49         .ocr_mask               = MMC_VDD_32_33 | MMC_VDD_33_34,
  50         .detect_delay_ms        = 200,
  51 };
  52
  53 void __init palm27x_mmc_init(int detect, int ro, int power,
  54                                         int power_inverted)
  55 {
  56         palm27x_mci_platform_data.gpio_card_detect      = detect;
  57         palm27x_mci_platform_data.gpio_card_ro          = ro;
  58         palm27x_mci_platform_data.gpio_power            = power;
  59         palm27x_mci_platform_data.gpio_power_invert     = power_inverted;
  60
  61         pxa_set_mci_info(&palm27x_mci_platform_data);
  62 }
  63 #endif
  64
  65 /******************************************************************************
  66  * Power management - standby
  67  ******************************************************************************/
  68 #if defined(CONFIG_SUSPEND)
  69 void __init palm27x_pm_init(unsigned long str_base)
  70 {
  71         static const unsigned long resume[] = {
  72                 0xe3a00101,     /* mov  r0,     #0x40000000 */
  73                 0xe380060f,     /* orr  r0, r0, #0x00f00000 */
  74                 0xe590f008,     /* ldr  pc, [r0, #0x08] */
  75         };
  76
  77         /*
  78          * Copy the bootloader.
  79          * NOTE: PalmZ72 uses a different wakeup method!
  80          */
  81         memcpy(phys_to_virt(str_base), resume, sizeof(resume));
  82 }
  83 #endif
  84
  85 /******************************************************************************
  86  * Framebuffer
  87  ******************************************************************************/
  88 #if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
  89 struct pxafb_mode_info palm_320x480_lcd_mode = {
  90         .pixclock       = 57692,
  91         .xres           = 320,
  92         .yres           = 480,
  93         .bpp            = 16,
  94
  95         .left_margin    = 32,
  96         .right_margin   = 1,
  97         .upper_margin   = 7,
  98         .lower_margin   = 1,
  99
 100         .hsync_len      = 4,
 101         .vsync_len      = 1,
 102 };
 103
 104 struct pxafb_mode_info palm_320x320_lcd_mode = {
 105         .pixclock       = 115384,
 106         .xres           = 320,
 107         .yres           = 320,
 108         .bpp            = 16,
 109
 110         .left_margin    = 27,
 111         .right_margin   = 7,
 112         .upper_margin   = 7,
 113         .lower_margin   = 8,
 114
 115         .hsync_len      = 6,
 116         .vsync_len      = 1,
 117 };
 118
 119 struct pxafb_mode_info palm_320x320_new_lcd_mode = {
 120         .pixclock       = 86538,
 121         .xres           = 320,
 122         .yres           = 320,
 123         .bpp            = 16,
 124
 125         .left_margin    = 20,
 126         .right_margin   = 8,
 127         .upper_margin   = 8,
 128         .lower_margin   = 5,
 129
 130         .hsync_len      = 4,
 131         .vsync_len      = 1,
 132 };
 133
 134 static struct pxafb_mach_info palm27x_lcd_screen = {
 135         .num_modes      = 1,
 136         .lcd_conn       = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
 137 };
 138
 139 static int palm27x_lcd_power;
 140 static void palm27x_lcd_ctl(int on, struct fb_var_screeninfo *info)
 141 {
 142         gpio_set_value(palm27x_lcd_power, on);
 143 }
 144
 145 void __init palm27x_lcd_init(int power, struct pxafb_mode_info *mode)
 146 {
 147         palm27x_lcd_screen.modes = mode;
 148
 149         if (gpio_is_valid(power)) {
 150                 if (!gpio_request(power, "LCD power")) {
 151                         pr_err("Palm27x: failed to claim lcd power gpio!\n");
 152                         return;
 153                 }
 154                 if (!gpio_direction_output(power, 1)) {
 155                         pr_err("Palm27x: lcd power configuration failed!\n");
 156                         return;
 157                 }
 158                 palm27x_lcd_power = power;
 159                 palm27x_lcd_screen.pxafb_lcd_power = palm27x_lcd_ctl;
 160         }
 161
 162         set_pxa_fb_info(&palm27x_lcd_screen);
 163 }
 164 #endif
 165
 166 /******************************************************************************
 167  * USB Gadget
 168  ******************************************************************************/
 169 #if     defined(CONFIG_USB_GADGET_PXA27X) || \
 170         defined(CONFIG_USB_GADGET_PXA27X_MODULE)
 171 static struct gpio_vbus_mach_info palm27x_udc_info = {
 172         .gpio_vbus_inverted     = 1,
 173 };
 174
 175 static struct platform_device palm27x_gpio_vbus = {
 176         .name   = "gpio-vbus",
 177         .id     = -1,
 178         .dev    = {
 179                 .platform_data  = &palm27x_udc_info,
 180         },
 181 };
 182
 183 void __init palm27x_udc_init(int vbus, int pullup, int vbus_inverted)
 184 {
 185         palm27x_udc_info.gpio_vbus      = vbus;
 186         palm27x_udc_info.gpio_pullup    = pullup;
 187
 188         palm27x_udc_info.gpio_vbus_inverted = vbus_inverted;
 189
 190         if (!gpio_request(pullup, "USB Pullup")) {
 191                 gpio_direction_output(pullup,
 192                         palm27x_udc_info.gpio_vbus_inverted);
 193                 gpio_free(pullup);
 194         } else
 195                 return;
 196
 197         platform_device_register(&palm27x_gpio_vbus);
 198 }
 199 #endif
 200
 201 /******************************************************************************
 202  * IrDA
 203  ******************************************************************************/
 204 #if defined(CONFIG_IRDA) || defined(CONFIG_IRDA_MODULE)
 205 static struct pxaficp_platform_data palm27x_ficp_platform_data = {
 206         .transceiver_cap        = IR_SIRMODE | IR_OFF,
 207 };
 208
 209 void __init palm27x_irda_init(int pwdn)
 210 {
 211         palm27x_ficp_platform_data.gpio_pwdown = pwdn;
 212         pxa_set_ficp_info(&palm27x_ficp_platform_data);
 213 }
 214 #endif
 215
 216 /******************************************************************************
 217  * WM97xx audio, battery
 218  ******************************************************************************/
 219 #if     defined(CONFIG_TOUCHSCREEN_WM97XX) || \
 220         defined(CONFIG_TOUCHSCREEN_WM97XX_MODULE)
 221 static struct wm97xx_batt_pdata palm27x_batt_pdata = {
 222         .batt_aux       = WM97XX_AUX_ID3,
 223         .temp_aux       = WM97XX_AUX_ID2,
 224         .charge_gpio    = -1,
 225         .batt_mult      = 1000,
 226         .batt_div       = 414,
 227         .temp_mult      = 1,
 228         .temp_div       = 1,
 229         .batt_tech      = POWER_SUPPLY_TECHNOLOGY_LIPO,
 230         .batt_name      = "main-batt",
 231 };
 232
 233 static struct wm97xx_pdata palm27x_wm97xx_pdata = {
 234         .batt_pdata     = &palm27x_batt_pdata,
 235 };
 236
 237 static pxa2xx_audio_ops_t palm27x_ac97_pdata = {
 238         .codec_pdata    = { &palm27x_wm97xx_pdata, },
 239 };
 240
 241 static struct palm27x_asoc_info palm27x_asoc_pdata = {
 242         .jack_gpio      = -1,
 243 };
 244
 245 static struct platform_device palm27x_asoc = {
 246         .name = "palm27x-asoc",
 247         .id   = -1,
 248         .dev  = {
 249                 .platform_data = &palm27x_asoc_pdata,
 250         },
 251 };
 252
 253 void __init palm27x_ac97_init(int minv, int maxv, int jack, int reset)
 254 {
 255         palm27x_ac97_pdata.reset_gpio   = reset;
 256         palm27x_asoc_pdata.jack_gpio    = jack;
 257
 258         if (minv < 0 || maxv < 0) {
 259                 palm27x_ac97_pdata.codec_pdata[0] = NULL;
 260                 pxa_set_ac97_info(&palm27x_ac97_pdata);
 261         } else {
 262                 palm27x_batt_pdata.min_voltage  = minv,
 263                 palm27x_batt_pdata.max_voltage  = maxv,
 264
 265                 pxa_set_ac97_info(&palm27x_ac97_pdata);
 266                 platform_device_register(&palm27x_asoc);
 267         }
 268 }
 269 #endif
 270
 271 /******************************************************************************
 272  * Backlight
 273  ******************************************************************************/
 274 #if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE)
 275 static int palm_bl_power;
 276 static int palm_lcd_power;
 277
 278 static int palm27x_backlight_init(struct device *dev)
 279 {
 280         int ret;
 281
 282         ret = gpio_request(palm_bl_power, "BL POWER");
 283         if (ret)
 284                 goto err;
 285         ret = gpio_direction_output(palm_bl_power, 0);
 286         if (ret)
 287                 goto err2;
 288
 289         if (gpio_is_valid(palm_lcd_power)) {
 290                 ret = gpio_request(palm_lcd_power, "LCD POWER");
 291                 if (ret)
 292                         goto err2;
 293                 ret = gpio_direction_output(palm_lcd_power, 0);
 294                 if (ret)
 295                         goto err3;
 296         }
 297
 298         return 0;
 299 err3:
 300         gpio_free(palm_lcd_power);
 301 err2:
 302         gpio_free(palm_bl_power);
 303 err:
 304         return ret;
 305 }
 306
 307 static int palm27x_backlight_notify(struct device *dev, int brightness)
 308 {
 309         gpio_set_value(palm_bl_power, brightness);
 310         if (gpio_is_valid(palm_lcd_power))
 311                 gpio_set_value(palm_lcd_power, brightness);
 312         return brightness;
 313 }
 314
 315 static void palm27x_backlight_exit(struct device *dev)
 316 {
 317         gpio_free(palm_bl_power);
 318         if (gpio_is_valid(palm_lcd_power))
 319                 gpio_free(palm_lcd_power);
 320 }
 321
 322 static struct platform_pwm_backlight_data palm27x_backlight_data = {
 323         .pwm_id         = 0,
 324         .max_brightness = 0xfe,
 325         .dft_brightness = 0x7e,
 326         .pwm_period_ns  = 3500,
 327         .init           = palm27x_backlight_init,
 328         .notify         = palm27x_backlight_notify,
 329         .exit           = palm27x_backlight_exit,
 330 };
 331
 332 static struct platform_device palm27x_backlight = {
 333         .name   = "pwm-backlight",
 334         .dev    = {
 335                 .parent         = &pxa27x_device_pwm0.dev,
 336                 .platform_data  = &palm27x_backlight_data,
 337         },
 338 };
 339
 340 void __init palm27x_pwm_init(int bl, int lcd)
 341 {
 342         palm_bl_power   = bl;
 343         palm_lcd_power  = lcd;
 344         platform_device_register(&palm27x_backlight);
 345 }
 346 #endif
 347
 348 /******************************************************************************
 349  * Power supply
 350  ******************************************************************************/
 351 #if defined(CONFIG_PDA_POWER) || defined(CONFIG_PDA_POWER_MODULE)
 352 static int palm_ac_state;
 353 static int palm_usb_state;
 354
 355 static int palm27x_power_supply_init(struct device *dev)
 356 {
 357         int ret;
 358
 359         ret = gpio_request(palm_ac_state, "AC state");
 360         if (ret)
 361                 goto err1;
 362         ret = gpio_direction_input(palm_ac_state);
 363         if (ret)
 364                 goto err2;
 365
 366         if (gpio_is_valid(palm_usb_state)) {
 367                 ret = gpio_request(palm_usb_state, "USB state");
 368                 if (ret)
 369                         goto err2;
 370                 ret = gpio_direction_input(palm_usb_state);
 371                 if (ret)
 372                         goto err3;
 373         }
 374
 375         return 0;
 376 err3:
 377         gpio_free(palm_usb_state);
 378 err2:
 379         gpio_free(palm_ac_state);
 380 err1:
 381         return ret;
 382 }
 383
 384 static void palm27x_power_supply_exit(struct device *dev)
 385 {
 386         gpio_free(palm_usb_state);
 387         gpio_free(palm_ac_state);
 388 }
 389
 390 static int palm27x_is_ac_online(void)
 391 {
 392         return gpio_get_value(palm_ac_state);
 393 }
 394
 395 static int palm27x_is_usb_online(void)
 396 {
 397         return !gpio_get_value(palm_usb_state);
 398 }
 399 static char *palm27x_supplicants[] = {
 400         "main-battery",
 401 };
 402
 403 static struct pda_power_pdata palm27x_ps_info = {
 404         .init                   = palm27x_power_supply_init,
 405         .exit                   = palm27x_power_supply_exit,
 406         .is_ac_online           = palm27x_is_ac_online,
 407         .is_usb_online          = palm27x_is_usb_online,
 408         .supplied_to            = palm27x_supplicants,
 409         .num_supplicants        = ARRAY_SIZE(palm27x_supplicants),
 410 };
 411
 412 static struct platform_device palm27x_power_supply = {
 413         .name = "pda-power",
 414         .id   = -1,
 415         .dev  = {
 416                 .platform_data = &palm27x_ps_info,
 417         },
 418 };
 419
 420 void __init palm27x_power_init(int ac, int usb)
 421 {
 422         palm_ac_state   = ac;
 423         palm_usb_state  = usb;
 424         platform_device_register(&palm27x_power_supply);
 425 }
 426 #endif
 427
 428 /******************************************************************************
 429  * Core power regulator
 430  ******************************************************************************/
 431 #if defined(CONFIG_REGULATOR_MAX1586) || \
 432     defined(CONFIG_REGULATOR_MAX1586_MODULE)
 433 static struct regulator_consumer_supply palm27x_max1587a_consumers[] = {
 434         {
 435                 .supply = "vcc_core",
 436         }
 437 };
 438
 439 static struct regulator_init_data palm27x_max1587a_v3_info = {
 440         .constraints = {
 441                 .name           = "vcc_core range",
 442                 .min_uV         = 900000,
 443                 .max_uV         = 1705000,
 444                 .always_on      = 1,
 445                 .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
 446         },
 447         .consumer_supplies      = palm27x_max1587a_consumers,
 448         .num_consumer_supplies  = ARRAY_SIZE(palm27x_max1587a_consumers),
 449 };
 450
 451 static struct max1586_subdev_data palm27x_max1587a_subdevs[] = {
 452         {
 453                 .name           = "vcc_core",
 454                 .id             = MAX1586_V3,
 455                 .platform_data  = &palm27x_max1587a_v3_info,
 456         }
 457 };
 458
 459 static struct max1586_platform_data palm27x_max1587a_info = {
 460         .subdevs     = palm27x_max1587a_subdevs,
 461         .num_subdevs = ARRAY_SIZE(palm27x_max1587a_subdevs),
 462         .v3_gain     = MAX1586_GAIN_R24_3k32, /* 730..1550 mV */
 463 };
 464
 465 static struct i2c_board_info __initdata palm27x_pi2c_board_info[] = {
 466         {
 467                 I2C_BOARD_INFO("max1586", 0x14),
 468                 .platform_data  = &palm27x_max1587a_info,
 469         },
 470 };
 471
 472 static struct i2c_pxa_platform_data palm27x_i2c_power_info = {
 473         .use_pio        = 1,
 474 };
 475
 476 void __init palm27x_pmic_init(void)
 477 {
 478         i2c_register_board_info(1, ARRAY_AND_SIZE(palm27x_pi2c_board_info));
 479         pxa27x_set_i2c_power_info(&palm27x_i2c_power_info);
 480 }
 481 #endif